1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015-2016 Intel Corp.
* Copyright (C) 2017 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <cpu/cpu.h>
#include <cpu/x86/mp.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/msr.h>
#include <cpu/x86/lapic.h>
#include <device/device.h>
#include <device/pci_ops.h>
#include <soc/pci_devs.h>
#include <soc/cpu.h>
#include <soc/northbridge.h>
#include <soc/smi.h>
#include <soc/iomap.h>
#include <console/console.h>
/*
* MP and SMM loading initialization.
*/
struct smm_relocation_attrs {
uint32_t smbase;
uint32_t tseg_base;
uint32_t tseg_mask;
};
static struct smm_relocation_attrs relo_attrs;
/*
* Do essential initialization tasks before APs can be fired up -
*
* 1. Prevent race condition in MTRR solution. Enable MTRRs on the BSP. This
* creates the MTRR solution that the APs will use. Otherwise APs will try to
* apply the incomplete solution as the BSP is calculating it.
*/
static void pre_mp_init(void)
{
x86_setup_mtrrs_with_detect();
x86_mtrr_check();
}
static int get_cpu_count(void)
{
return (pci_read_config16(SOC_HT_DEV, D18F0_CPU_CNT) & CPU_CNT_MASK)
+ 1;
}
static void get_smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
size_t *smm_save_state_size)
{
void *smm_base;
size_t smm_size;
void *handler_base;
size_t handler_size;
/* Initialize global tracking state. */
smm_region_info(&smm_base, &smm_size);
smm_subregion(SMM_SUBREGION_HANDLER, &handler_base, &handler_size);
relo_attrs.smbase = (uint32_t)smm_base;
relo_attrs.tseg_base = relo_attrs.smbase;
relo_attrs.tseg_mask = ALIGN_DOWN(~(smm_size - 1), 128 * KiB);
relo_attrs.tseg_mask |= SMM_TSEG_WB;
*perm_smbase = (uintptr_t)handler_base;
*perm_smsize = handler_size;
*smm_save_state_size = sizeof(amd64_smm_state_save_area_t);
}
static void relocation_handler(int cpu, uintptr_t curr_smbase,
uintptr_t staggered_smbase)
{
msr_t tseg_base, tseg_mask;
amd64_smm_state_save_area_t *smm_state;
tseg_base.lo = relo_attrs.tseg_base;
tseg_base.hi = 0;
wrmsr(SMM_ADDR_MSR, tseg_base);
tseg_mask.lo = relo_attrs.tseg_mask;
tseg_mask.hi = ((1 << (cpu_phys_address_size() - 32)) - 1);
wrmsr(SMM_MASK_MSR, tseg_mask);
smm_state = (void *)(SMM_AMD64_SAVE_STATE_OFFSET + curr_smbase);
smm_state->smbase = staggered_smbase;
}
static const struct mp_ops mp_ops = {
.pre_mp_init = pre_mp_init,
.get_cpu_count = get_cpu_count,
.get_smm_info = get_smm_info,
.relocation_handler = relocation_handler,
.post_mp_init = enable_smi_generation,
};
void picasso_init_cpus(struct device *dev)
{
/* Clear for take-off */
if (mp_init_with_smm(dev->link_list, &mp_ops) < 0)
printk(BIOS_ERR, "MP initialization failure.\n");
/* The flash is now no longer cacheable. Reset to WP for performance. */
mtrr_use_temp_range(FLASH_BASE_ADDR, CONFIG_ROM_SIZE, MTRR_TYPE_WRPROT);
set_warm_reset_flag();
}
static void model_15_init(struct device *dev)
{
check_mca();
setup_lapic();
/*
* Per AMD, sync an undocumented MSR with the PSP base address.
* Experiments showed that if you write to the MSR after it has
* been previously programmed, it causes a general protection fault.
* Also, the MSR survives warm reset and S3 cycles, so we need to
* test if it was previously written before writing to it.
*/
msr_t psp_msr;
uint32_t psp_bar; /* Note: NDA BKDG names this 32-bit register BAR3 */
psp_bar = pci_read_config32(SOC_PSP_DEV, PCI_BASE_ADDRESS_4);
psp_bar &= ~PCI_BASE_ADDRESS_MEM_ATTR_MASK;
psp_msr = rdmsr(0xc00110a2);
if (psp_msr.lo == 0) {
psp_msr.lo = psp_bar;
wrmsr(0xc00110a2, psp_msr);
}
}
static struct device_operations cpu_dev_ops = {
.init = model_15_init,
};
static struct cpu_device_id cpu_table[] = {
{ X86_VENDOR_AMD, 0x670f00 },
{ 0, 0 },
};
static const struct cpu_driver model_15 __cpu_driver = {
.ops = &cpu_dev_ops,
.id_table = cpu_table,
};
|
