1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010-2017 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <arch/io.h>
#include <bootstate.h>
#include <cpu/x86/smm.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <cbmem.h>
#include <amdblocks/amd_pci_util.h>
#include <soc/southbridge.h>
#include <soc/smi.h>
#include <soc/amd_pci_int_defs.h>
#include <fchec.h>
#include <delay.h>
#include <soc/pci_devs.h>
#include <agesa_headers.h>
static int is_sata_config(void)
{
return !((CONFIG_STONEYRIDGE_SATA_MODE == SataNativeIde)
|| (CONFIG_STONEYRIDGE_SATA_MODE == SataLegacyIde));
}
static inline int sb_sata_enable(void)
{
/* True if IDE or AHCI. */
return (CONFIG_STONEYRIDGE_SATA_MODE == SataNativeIde) ||
(CONFIG_STONEYRIDGE_SATA_MODE == SataAhci);
}
static inline int sb_ide_enable(void)
{
/* True if IDE or LEGACY IDE. */
return (CONFIG_STONEYRIDGE_SATA_MODE == SataNativeIde) ||
(CONFIG_STONEYRIDGE_SATA_MODE == SataLegacyIde);
}
void SetFchResetParams(FCH_RESET_INTERFACE *params)
{
params->Xhci0Enable = IS_ENABLED(CONFIG_STONEYRIDGE_XHCI_ENABLE);
params->SataEnable = sb_sata_enable();
params->IdeEnable = sb_ide_enable();
}
void SetFchEnvParams(FCH_INTERFACE *params)
{
params->AzaliaController = AzEnable;
params->SataClass = CONFIG_STONEYRIDGE_SATA_MODE;
params->SataEnable = is_sata_config();
params->IdeEnable = !params->SataEnable;
params->SataIdeMode = (CONFIG_STONEYRIDGE_SATA_MODE == SataLegacyIde);
}
void SetFchMidParams(FCH_INTERFACE *params)
{
SetFchEnvParams(params);
}
/*
* Table of APIC register index and associated IRQ name. Using IDX_XXX_NAME
* provides a visible association with the index, therefore helping
* maintainability of table. If a new index/name is defined in
* amd_pci_int_defs.h, just add the pair at the end of this table.
* Order is not important.
*/
const static struct irq_idx_name irq_association[] = {
{ PIRQ_A, "INTA#" },
{ PIRQ_B, "INTB#" },
{ PIRQ_C, "INTC#" },
{ PIRQ_D, "INTD#" },
{ PIRQ_E, "INTE#" },
{ PIRQ_F, "INTF#" },
{ PIRQ_G, "INTG#" },
{ PIRQ_H, "INTH#" },
{ PIRQ_MISC, "Misc" },
{ PIRQ_MISC0, "Misc0" },
{ PIRQ_MISC1, "Misc1" },
{ PIRQ_MISC2, "Misc2" },
{ PIRQ_SIRQA, "Ser IRQ INTA" },
{ PIRQ_SIRQB, "Ser IRQ INTB" },
{ PIRQ_SIRQC, "Ser IRQ INTC" },
{ PIRQ_SIRQD, "Ser IRQ INTD" },
{ PIRQ_SCI, "SCI" },
{ PIRQ_SMBUS, "SMBUS" },
{ PIRQ_ASF, "ASF" },
{ PIRQ_HDA, "HDA" },
{ PIRQ_FC, "FC" },
{ PIRQ_PMON, "PerMon" },
{ PIRQ_SD, "SD" },
{ PIRQ_SDIO, "SDIOt" },
{ PIRQ_IMC0, "IMC INT0" },
{ PIRQ_IMC1, "IMC INT1" },
{ PIRQ_IMC2, "IMC INT2" },
{ PIRQ_IMC3, "IMC INT3" },
{ PIRQ_IMC4, "IMC INT4" },
{ PIRQ_IMC5, "IMC INT5" },
{ PIRQ_EHCI, "EHCI" },
{ PIRQ_XHCI, "XHCI" },
{ PIRQ_SATA, "SATA" },
{ PIRQ_GPIO, "GPIO" },
{ PIRQ_I2C0, "I2C0" },
{ PIRQ_I2C1, "I2C1" },
{ PIRQ_I2C2, "I2C2" },
{ PIRQ_I2C3, "I2C3" },
{ PIRQ_UART0, "UART0" },
{ PIRQ_UART1, "UART1" },
};
/*
* Structure to simplify code obtaining the total of used wide IO
* registers and the size assigned to each.
*/
static struct wide_io_ioport_and_bits {
uint32_t enable;
uint16_t port;
uint8_t alt;
} wio_io_en[TOTAL_WIDEIO_PORTS] = {
{
LPC_WIDEIO0_ENABLE,
LPC_WIDEIO_GENERIC_PORT,
LPC_ALT_WIDEIO0_ENABLE
},
{
LPC_WIDEIO1_ENABLE,
LPC_WIDEIO1_GENERIC_PORT,
LPC_ALT_WIDEIO1_ENABLE
},
{
LPC_WIDEIO2_ENABLE,
LPC_WIDEIO2_GENERIC_PORT,
LPC_ALT_WIDEIO2_ENABLE
}
};
const struct irq_idx_name *sb_get_apic_reg_association(size_t *size)
{
*size = ARRAY_SIZE(irq_association);
return irq_association;
}
void sb_program_gpios(const struct soc_amd_stoneyridge_gpio *gpio_ptr,
size_t size)
{
void *tmp_ptr;
uint8_t control, mux, index;
for (index = 0; index < size; index++) {
mux = gpio_ptr[index].function;
control = gpio_ptr[index].control;
tmp_ptr = (void *)(gpio_ptr[index].gpio + AMD_GPIO_MUX);
write8(tmp_ptr, mux & AMD_GPIO_MUX_MASK);
/*
* Get the address of AMD_GPIO_CONTROL (dword) relative
* to the desired pin and program bits 16-23.
*/
tmp_ptr = (void *)(gpio_ptr[index].gpio * sizeof(uint32_t) +
AMD_GPIO_CONTROL + 2);
write8(tmp_ptr, control);
}
}
/**
* @brief Find the size of a particular wide IO
*
* @param index = index of desired wide IO
*
* @return size of desired wide IO
*/
uint16_t sb_wideio_size(int index)
{
uint32_t enable_register;
uint16_t size = 0;
uint8_t alternate_register;
if (index >= TOTAL_WIDEIO_PORTS)
return size;
enable_register = pci_read_config32(SOC_LPC_DEV,
LPC_IO_OR_MEM_DECODE_ENABLE);
alternate_register = pci_read_config8(SOC_LPC_DEV,
LPC_ALT_WIDEIO_RANGE_ENABLE);
if (enable_register & wio_io_en[index].enable)
size = (alternate_register & wio_io_en[index].alt) ?
16 : 512;
return size;
}
/**
* @brief Identify if any LPC wide IO is covering the IO range
*
* @param start = start of IO range
* @param size = size of IO range
*
* @return Index of wide IO covering the range or error
*/
int sb_find_wideio_range(uint16_t start, uint16_t size)
{
uint32_t enable_register;
int i, index = WIDEIO_RANGE_ERROR;
uint16_t end, current_size, start_wideio, end_wideio;
end = start + size;
enable_register = pci_read_config32(SOC_LPC_DEV,
LPC_IO_OR_MEM_DECODE_ENABLE);
for (i = 0; i < TOTAL_WIDEIO_PORTS; i++) {
current_size = sb_wideio_size(i);
if (current_size == 0)
continue;
start_wideio = pci_read_config16(SOC_LPC_DEV,
wio_io_en[i].port);
end_wideio = start_wideio + current_size;
if ((start >= start_wideio) && (end <= end_wideio)) {
index = i;
break;
}
}
return index;
}
/**
* @brief Program a LPC wide IO to support an IO range
*
* @param start = start of range to be routed through wide IO
* @param size = size of range to be routed through wide IO
*
* @return Index of wide IO register used or error
*/
int sb_set_wideio_range(uint16_t start, uint16_t size)
{
int i, index = WIDEIO_RANGE_ERROR;
uint32_t enable_register;
uint8_t alternate_register;
enable_register = pci_read_config32(SOC_LPC_DEV,
LPC_IO_OR_MEM_DECODE_ENABLE);
alternate_register = pci_read_config8(SOC_LPC_DEV,
LPC_ALT_WIDEIO_RANGE_ENABLE);
for (i = 0; i < TOTAL_WIDEIO_PORTS; i++) {
if (enable_register & wio_io_en[i].enable)
continue;
index = i;
pci_write_config16(SOC_LPC_DEV, wio_io_en[i].port, start);
enable_register |= wio_io_en[i].enable;
pci_write_config32(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE,
enable_register);
if (size <= 16)
alternate_register |= wio_io_en[i].alt;
else
alternate_register &= ~wio_io_en[i].alt;
pci_write_config8(SOC_LPC_DEV,
LPC_ALT_WIDEIO_RANGE_ENABLE,
alternate_register);
break;
}
return index;
}
static void power_on_aoac_device(int aoac_device_control_register)
{
uint8_t byte;
uint8_t *register_pointer = (uint8_t *)(uintptr_t)AOAC_MMIO_BASE
+ aoac_device_control_register;
/* Power on the UART and AMBA devices */
byte = read8(register_pointer);
byte |= FCH_AOAC_PWR_ON_DEV;
write8(register_pointer, byte);
}
static bool is_aoac_device_enabled(int aoac_device_status_register)
{
uint8_t byte;
byte = read8((uint8_t *)(uintptr_t)AOAC_MMIO_BASE
+ aoac_device_status_register);
byte &= (FCH_AOAC_PWR_RST_STATE | FCH_AOAC_RST_CLK_OK_STATE);
if (byte == (FCH_AOAC_PWR_RST_STATE | FCH_AOAC_RST_CLK_OK_STATE))
return true;
else
return false;
}
void configure_stoneyridge_uart(void)
{
bool status;
/* Power on the UART and AMBA devices */
power_on_aoac_device(FCH_AOAC_D3_CONTROL_UART0
+ CONFIG_UART_FOR_CONSOLE * 2);
power_on_aoac_device(FCH_AOAC_D3_CONTROL_AMBA);
/* Set the GPIO mux to UART */
write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0);
write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0);
write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0);
write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0);
/* Wait for the UART and AMBA devices to indicate power and clock OK */
do {
udelay(100);
status = is_aoac_device_enabled(FCH_AOAC_D3_STATE_UART0
+ CONFIG_UART_FOR_CONSOLE * 2);
status &= is_aoac_device_enabled(FCH_AOAC_D3_STATE_AMBA);
} while (!status);
}
void sb_pci_port80(void)
{
u8 byte;
byte = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
byte &= ~DECODE_IO_PORT_ENABLE4_H; /* disable lpc port 80 */
pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
}
void sb_lpc_port80(void)
{
u8 byte;
/* Enable LPC controller */
outb(PM_LPC_GATING, PM_INDEX);
byte = inb(PM_DATA);
byte |= PM_LPC_ENABLE;
outb(PM_LPC_GATING, PM_INDEX);
outb(byte, PM_DATA);
/* Enable port 80 LPC decode in pci function 3 configuration space. */
byte = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
byte |= DECODE_IO_PORT_ENABLE4_H; /* enable port 80 */
pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
}
void sb_lpc_decode(void)
{
u32 tmp = 0;
/* Enable I/O decode to LPC bus */
tmp = DECODE_ENABLE_PARALLEL_PORT0 | DECODE_ENABLE_PARALLEL_PORT2
| DECODE_ENABLE_PARALLEL_PORT4 | DECODE_ENABLE_SERIAL_PORT0
| DECODE_ENABLE_SERIAL_PORT1 | DECODE_ENABLE_SERIAL_PORT2
| DECODE_ENABLE_SERIAL_PORT3 | DECODE_ENABLE_SERIAL_PORT4
| DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT6
| DECODE_ENABLE_SERIAL_PORT7 | DECODE_ENABLE_AUDIO_PORT0
| DECODE_ENABLE_AUDIO_PORT1 | DECODE_ENABLE_AUDIO_PORT2
| DECODE_ENABLE_AUDIO_PORT3 | DECODE_ENABLE_MSS_PORT2
| DECODE_ENABLE_MSS_PORT3 | DECODE_ENABLE_FDC_PORT0
| DECODE_ENABLE_FDC_PORT1 | DECODE_ENABLE_GAME_PORT
| DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT
| DECODE_ENABLE_ADLIB_PORT;
pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, tmp);
}
void sb_clk_output_48Mhz(void)
{
u32 ctrl;
u32 *misc_clk_cntl_1_ptr = (u32 *)(uintptr_t)(MISC_MMIO_BASE
+ MISC_MISC_CLK_CNTL_1);
/*
* Enable the X14M_25M_48M_OSC pin and leaving it at it's default so
* 48Mhz will be on ball AP13 (FT3b package)
*/
ctrl = read32(misc_clk_cntl_1_ptr);
/* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */
ctrl &= ~OSCOUT1_CLK_OUTPUT_ENB;
write32(misc_clk_cntl_1_ptr, ctrl);
}
static uintptr_t sb_spibase(void)
{
u32 base, enables;
/* Make sure the base address is predictable */
base = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER);
enables = base & 0xf;
base &= ~0x3f;
if (!base) {
base = SPI_BASE_ADDRESS;
pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER,
base | enables | SPI_ROM_ENABLE);
/* PCI_COMMAND_MEMORY is read-only and enabled. */
}
return (uintptr_t)base;
}
void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm)
{
uintptr_t base = sb_spibase();
write16((void *)base + SPI100_SPEED_CONFIG,
(norm << SPI_NORM_SPEED_NEW_SH) |
(fast << SPI_FAST_SPEED_NEW_SH) |
(alt << SPI_ALT_SPEED_NEW_SH) |
(tpm << SPI_TPM_SPEED_NEW_SH));
write16((void *)base + SPI100_ENABLE, SPI_USE_SPI100);
}
void sb_disable_4dw_burst(void)
{
uintptr_t base = sb_spibase();
write16((void *)base + SPI100_HOST_PREF_CONFIG,
read16((void *)base + SPI100_HOST_PREF_CONFIG)
& ~SPI_RD4DW_EN_HOST);
}
void sb_set_readspeed(u16 norm, u16 fast)
{
uintptr_t base = sb_spibase();
write16((void *)base + SPI_CNTRL1, (read16((void *)base + SPI_CNTRL1)
& ~SPI_CNTRL1_SPEED_MASK)
| (norm << SPI_NORM_SPEED_SH)
| (fast << SPI_FAST_SPEED_SH));
}
void sb_read_mode(u32 mode)
{
uintptr_t base = sb_spibase();
write32((void *)base + SPI_CNTRL0,
(read32((void *)base + SPI_CNTRL0)
& ~SPI_READ_MODE_MASK) | mode);
}
void sb_tpm_decode_spi(void)
{
u32 spibase = pci_read_config32(SOC_LPC_DEV,
SPIROM_BASE_ADDRESS_REGISTER);
pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, spibase
| ROUTE_TPM_2_SPI);
}
/*
* Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
*
* Hardware should enable LPC ROM by pin straps. This function does not
* handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
*
* The southbridge power-on default is to map 512K ROM space.
*
*/
void sb_enable_rom(void)
{
u8 reg8;
/*
* Decode variable LPC ROM address ranges 1 and 2.
* Bits 3-4 are not defined in any publicly available datasheet
*/
reg8 = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE);
reg8 |= (1 << 3) | (1 << 4);
pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE, reg8);
/*
* LPC ROM address range 1:
* Enable LPC ROM range mirroring start at 0x000e(0000).
*/
pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE1_START, 0x000e);
/* Enable LPC ROM range mirroring end at 0x000f(ffff). */
pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE1_END, 0x000f);
/*
* LPC ROM address range 2:
*
* Enable LPC ROM range start at:
* 0xfff8(0000): 512KB
* 0xfff0(0000): 1MB
* 0xffe0(0000): 2MB
* 0xffc0(0000): 4MB
*/
pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_START, 0x10000
- (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
/* Enable LPC ROM range end at 0xffff(ffff). */
pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_END, 0xffff);
}
void bootblock_fch_early_init(void)
{
sb_enable_rom();
sb_lpc_port80();
sb_lpc_decode();
}
void sb_enable(device_t dev)
{
printk(BIOS_DEBUG, "%s\n", __func__);
}
static void sb_init_acpi_ports(void)
{
u32 reg;
/* We use some of these ports in SMM regardless of whether or not
* ACPI tables are generated. Enable these ports indiscriminately.
*/
pm_write16(PM_EVT_BLK, ACPI_PM_EVT_BLK);
pm_write16(PM1_CNT_BLK, ACPI_PM1_CNT_BLK);
pm_write16(PM_TMR_BLK, ACPI_PM_TMR_BLK);
pm_write16(PM_GPE0_BLK, ACPI_GPE0_BLK);
/* CpuControl is in \_PR.CP00, 6 bytes */
pm_write16(PM_CPU_CTRL, ACPI_CPU_CONTROL);
if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
/* APMC - SMI Command Port */
pm_write16(PM_ACPI_SMI_CMD, APM_CNT);
configure_smi(SMITYPE_SMI_CMD_PORT, SMI_MODE_SMI);
/* SMI on SlpTyp requires sending SMI before completion
* response of the I/O write. The BKDG also specifies
* clearing ForceStpClkRetry for SMI trapping.
*/
reg = pm_read32(PM_PCI_CTRL);
reg |= FORCE_SLPSTATE_RETRY;
reg &= ~FORCE_STPCLK_RETRY;
pm_write32(PM_PCI_CTRL, reg);
/* Disable SlpTyp feature */
reg = pm_read8(PM_RST_CTRL1);
reg &= ~SLPTYPE_CONTROL_EN;
pm_write8(PM_RST_CTRL1, reg);
configure_smi(SMITYPE_SLP_TYP, SMI_MODE_SMI);
} else {
pm_write16(PM_ACPI_SMI_CMD, 0);
}
/* Decode ACPI registers and enable standard features */
pm_write8(PM_ACPI_CONF, PM_ACPI_DECODE_STD |
PM_ACPI_GLOBAL_EN |
PM_ACPI_RTC_EN_EN |
PM_ACPI_TIMER_EN_EN);
}
void southbridge_init(void *chip_info)
{
sb_init_acpi_ports();
}
void southbridge_final(void *chip_info)
{
uint8_t restored_power = PM_S5_AT_POWER_RECOVERY;
if (IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)) {
agesawrapper_fchecfancontrolservice();
if (!IS_ENABLED(CONFIG_ACPI_ENABLE_THERMAL_ZONE))
enable_imc_thermal_zone();
}
if (IS_ENABLED(CONFIG_MAINBOARD_POWER_RESTORE))
restored_power = PM_RESTORE_S0_IF_PREV_S0;
pm_write8(PM_RTC_SHADOW, restored_power);
}
/*
* Update the PCI devices with a valid IRQ number
* that is set in the mainboard PCI_IRQ structures.
*/
static void set_pci_irqs(void *unused)
{
/* Write PCI_INTR regs 0xC00/0xC01 */
write_pci_int_table();
/* Write IRQs for all devicetree enabled devices */
write_pci_cfg_irqs();
}
/*
* Hook this function into the PCI state machine
* on entry into BS_DEV_ENABLE.
*/
BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, set_pci_irqs, NULL);
|