1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <assert.h>
#include <device/device.h>
#include <soc/ramstage.h>
#include <soc/reg_access.h>
/* Cat Trip Clear value must be less than Cat Trip Set value */
#define PLATFORM_CATASTROPHIC_TRIP_CELSIUS 105
#define PLATFORM_CATASTROPHIC_CLEAR_CELSIUS 65
static const struct reg_script thermal_init_script[] = {
/* Setup RMU Thermal sensor registers for Ratiometric mode. */
REG_SOC_UNIT_RMW(QUARK_SCSS_SOC_UNIT_TSCGF1_CONFIG,
~(B_TSCGF1_CONFIG_ISNSCURRENTSEL_MASK
| B_TSCGF1_CONFIG_ISNSCHOPSEL_MASK
| B_TSCGF1_CONFIG_ISNSINTERNALVREFEN
| B_TSCGF1_CONFIG_IBGEN
| B_TSCGF1_CONFIG_IBGCHOPEN),
((V_TSCGF1_CONFIG_ISNSCURRENTSEL_RATIO_MODE
<< B_TSCGF1_CONFIG_ISNSCURRENTSEL_BP)
| (V_TSCGF1_CONFIG_ISNSCHOPSEL_RATIO_MODE
<< B_TSCGF1_CONFIG_ISNSCHOPSEL_BP)
| (V_TSCGF1_CONFIG_ISNSINTERNALVREFEN_RATIO_MODE
<< B_TSCGF1_CONFIG_ISNSINTERNALVREFEN_BP)
| (V_TSCGF1_CONFIG_IBGEN_RATIO_MODE
<< B_TSCGF1_CONFIG_IBGEN_BP)
| (V_TSCGF1_CONFIG_IBGCHOPEN_RATIO_MODE
<< B_TSCGF1_CONFIG_IBGCHOPEN_BP))),
REG_SOC_UNIT_RMW(QUARK_SCSS_SOC_UNIT_TSCGF2_CONFIG2,
~(B_TSCGF2_CONFIG2_ICALCONFIGSEL_MASK
| B_TSCGF2_CONFIG2_ISPARECTRL_MASK
| B_TSCGF2_CONFIG2_ICALCOARSETUNE_MASK),
((V_TSCGF2_CONFIG2_ICALCONFIGSEL_RATIO_MODE
<< B_TSCGF2_CONFIG2_ICALCONFIGSEL_BP)
| (V_TSCGF2_CONFIG2_ISPARECTRL_RATIO_MODE
<< B_TSCGF2_CONFIG2_ISPARECTRL_BP)
| (V_TSCGF2_CONFIG2_ICALCOARSETUNE_RATIO_MODE
<< B_TSCGF2_CONFIG2_ICALCOARSETUNE_BP))),
REG_SOC_UNIT_RMW(QUARK_SCSS_SOC_UNIT_TSCGF2_CONFIG,
~(B_TSCGF2_CONFIG_IDSCONTROL_MASK
| B_TSCGF2_CONFIG_IDSTIMING_MASK),
((V_TSCGF2_CONFIG_IDSCONTROL_RATIO_MODE
<< B_TSCGF2_CONFIG_IDSCONTROL_BP)
| (V_TSCGF2_CONFIG_IDSTIMING_RATIO_MODE
<< B_TSCGF2_CONFIG_IDSTIMING_BP))),
REG_SOC_UNIT_RMW(QUARK_SCSS_SOC_UNIT_TSCGF3_CONFIG,
~B_TSCGF3_CONFIG_ITSGAMMACOEFF_MASK,
V_TSCGF3_CONFIG_ITSGAMMACOEFF_RATIO_MODE
<< B_TSCGF3_CONFIG_ITSGAMMACOEFF_BP),
/* Enable RMU Thermal sensor with a Catastrophic Trip point. */
/* Set up Catastrophic Trip point.
*
* Trip Register fields are 8-bit temperature values of granularity 1
* degree C where 0x00 corresponds to -50 degrees C and 0xFF corresponds
* to 205 degrees C.
*
* Add 50 to Celsius values to get values for register fields.
*/
REG_RMU_TEMP_RMW(QUARK_NC_RMU_REG_TS_TRIP,
~(TS_CAT_TRIP_SET_THOLD_MASK | TS_CAT_TRIP_CLEAR_THOLD_MASK),
(((PLATFORM_CATASTROPHIC_TRIP_CELSIUS + 50)
<< TS_CAT_TRIP_SET_THOLD_BP)
| ((PLATFORM_CATASTROPHIC_CLEAR_CELSIUS + 50)
<< TS_CAT_TRIP_CLEAR_THOLD_BP))),
/* To enable the TS do the following:
* 1) Take the TS out of reset by setting itsrst to 0x0.
* 2) Enable the TS using RMU Thermal sensor mode register.
*/
REG_SOC_UNIT_AND(QUARK_SCSS_SOC_UNIT_TSCGF3_CONFIG,
~B_TSCGF3_CONFIG_ITSRST),
REG_RMU_TEMP_OR(QUARK_NC_RMU_REG_TS_MODE, TS_ENABLE),
/* Lock all RMU Thermal sensor control & trip point registers. */
REG_RMU_TEMP_OR(QUARK_NC_RMU_REG_CONFIG, TS_LOCK_THRM_CTRL_REGS_ENABLE
| TS_LOCK_AUX_TRIP_PT_REGS_ENABLE),
REG_SCRIPT_END
};
static void chip_init(void *chip_info)
{
/* Validate the temperature settings */
ASSERT(PLATFORM_CATASTROPHIC_TRIP_CELSIUS <= 255);
ASSERT(PLATFORM_CATASTROPHIC_TRIP_CELSIUS
> PLATFORM_CATASTROPHIC_CLEAR_CELSIUS);
/* Set the temperature settings */
reg_script_run(thermal_init_script);
/* Verify that the thermal configuration is locked */
ASSERT((reg_rmu_temp_read(QUARK_NC_RMU_REG_CONFIG)
& (TS_LOCK_THRM_CTRL_REGS_ENABLE
| TS_LOCK_AUX_TRIP_PT_REGS_ENABLE))
== (TS_LOCK_THRM_CTRL_REGS_ENABLE
| TS_LOCK_AUX_TRIP_PT_REGS_ENABLE));
/* Perform silicon specific init. */
fsp_silicon_init();
}
static struct device_operations pci_domain_ops = {
.read_resources = pci_domain_read_resources,
.set_resources = pci_domain_set_resources,
.scan_bus = pci_domain_scan_bus,
};
static void chip_enable_dev(struct device *dev)
{
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_DOMAIN)
dev->ops = &pci_domain_ops;
}
struct chip_operations soc_intel_quark_ops = {
CHIP_NAME("Intel Quark")
.init = &chip_init,
.enable_dev = chip_enable_dev,
};
|
