summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/ipq40xx/usb.c
blob: 5b27541a6c0b33b4b1f40a3878ac441dbb96cb39 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
/*
 * This file is part of the coreboot project.
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <soc/clock.h>
#include <soc/iomap.h>
#include <soc/usb.h>

/**
 *  USB Hardware registers
 */
#define PHY_CTRL0_ADDR	0x000
#define PHY_CTRL1_ADDR	0x004
#define PHY_CTRL2_ADDR	0x008
#define PHY_CTRL3_ADDR	0x00C
#define PHY_CTRL4_ADDR	0x010
#define PHY_MISC_ADDR	0x024
#define PHY_IPG_ADDR	0x030

#define PHY_CTRL0_VAL	0xA4600015
#define PHY_CTRL1_VAL	0x09500000
#define PHY_CTRL2_VAL	0x00058180
#define PHY_CTRL3_VAL	0x6DB6DCD6
#define PHY_CTRL4_VAL	0x836DB6DB
#define PHY_MISC_VAL	0x3803FB0C
#define PHY_IPG_VAL	0x47323232

#define	USB_HOST3_PHY_BASE		((void *)0x8a00000)
#define	USB_HOST3_BALDUR_PHY_BASE	((void *)0xa6000)
#define	GCC_USB3_RST_CTRL		((void *)0x0181E038)

#define DWC3_GCTL			0xc110
#define DWC3_GUSB3PIPECTL(n)		(0xc2c0 + (n * 0x04))
#define DWC3_GUSB2PHYCFG(n)		(0xc200 + (n * 0x04))

/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
#define DWC3_GUSB3PIPECTL_SUSPHY	(1 << 17)
#define DWC3_GCTL_CORESOFTRESET		(1 << 11)
#define DWC3_GCTL_PRTCAPDIR(n)		((n) << 12)
#define DWC3_GCTL_PRTCAP_OTG		3
#define DWC3_DCTL_CSFTRST		(1 << 30)
#define DWC3_GSNPSID			0xc120
#define DWC3_DCTL			0xc704


/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
#define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
#define DWC3_GSNPSID_MASK		0xffff0000
#define DWC3_GEVTEN			0xc114


#define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
#define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
#define DWC3_GCTL_DISSCRAMBLE		(1 << 3)
#define DWC3_GCTL_DSBLCLKGTNG		(1 << 0)
#define DWC3_GCTL_U2RSTECN		(1 << 16)
#define DWC3_REVISION_190A		0x5533190a

#define USB30_HS_PHY_CTRL		0x00000010
#define SW_SESSVLD			(0x01 << 0x1C)
#define UTMI_OTG_VBUS_VALID		(0x01 << 0x14)

#define USB30_SS_PHY_CTRL		0x00000030
#define LANE0_PWR_PRESENT		(0x01 << 0x18)

static void setup_dwc3(void);

/**
 * Write register.
 *
 * @param base - PHY base virtual address.
 * @param offset - register offset.
 * @param val - value to write.
 */
static inline void qscratch_write(void *base, u32 offset, u32 val)
{
	write32(base + offset, val);
}

/**
 * Write register and read back masked value to confirm it is written
 *
 * @param base - base virtual address.
 * @param offset - register offset.
 * @param mask - register bitmask specifying what should be updated
 * @param val - value to write.
 */
static inline void qscratch_write_readback(void *base, u32 offset,
						const u32 mask, u32 val)
{
	u32 write_val, tmp = read32(base + offset);

	tmp &= ~mask;       /* retain other bits */
	write_val = tmp | val;

	write32(base + offset, write_val);

	/* Read back to see if val was written */
	tmp = read32(base + offset);
	tmp &= mask;        /* clear other bits */

	if (tmp != val) {
		printk(BIOS_INFO, "write: %x to QSCRATCH: %x FAILED\n",
			val, offset);
	}
}

static void dwc3_ipq40xx_enable_vbus_valid(void)
{
	/* Enable VBUS valid for HS PHY*/
	qscratch_write_readback((void *)0x8af8800, USB30_HS_PHY_CTRL,
				SW_SESSVLD, SW_SESSVLD);
	qscratch_write_readback((void *)0x8af8800, USB30_HS_PHY_CTRL,
				UTMI_OTG_VBUS_VALID, UTMI_OTG_VBUS_VALID);

	/* Enable VBUS valid for SS PHY*/
	qscratch_write_readback((void *)0x8af8800, USB30_SS_PHY_CTRL,
				LANE0_PWR_PRESENT, LANE0_PWR_PRESENT);
}

static void qcom_baldur_hs_phy_init(void)
{
	u32 reg;

	/* assert HS PHY POR reset */
	reg = read32(GCC_USB3_RST_CTRL);
	reg = reg | 0x10;
	write32(GCC_USB3_RST_CTRL, reg);
	mdelay(10);

	/* assert HS PHY SRIF reset */
	reg = read32(GCC_USB3_RST_CTRL);
	reg = reg | 0x4;
	write32(GCC_USB3_RST_CTRL, reg);
	mdelay(10);

	/* deassert HS PHY SRIF reset and program HS PHY registers */
	reg = read32(GCC_USB3_RST_CTRL);
	reg = reg & ~0x4;
	write32(GCC_USB3_RST_CTRL, reg);

	mdelay(10);

	/* perform PHY register writes */
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_CTRL0_ADDR, PHY_CTRL0_VAL);
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_CTRL1_ADDR, PHY_CTRL1_VAL);
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_CTRL2_ADDR, PHY_CTRL2_VAL);
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_CTRL3_ADDR, PHY_CTRL3_VAL);
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_CTRL4_ADDR, PHY_CTRL4_VAL);
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_MISC_ADDR, PHY_MISC_VAL);
	write32(USB_HOST3_BALDUR_PHY_BASE + PHY_IPG_ADDR, PHY_IPG_VAL);

	mdelay(10);

	/* de-assert USB3 HS PHY POR reset */
	reg = read32(GCC_USB3_RST_CTRL);
	reg = reg & ~0x10;
	write32(GCC_USB3_RST_CTRL, reg);
}

static void qcom_uni_ss_phy_init(void)
{
	u32 reg;

	/* assert SS PHY POR reset */
	reg = read32(GCC_USB3_RST_CTRL);
	reg = reg | 0x20;
	write32(GCC_USB3_RST_CTRL, reg);

	mdelay(100);

	/* deassert SS PHY POR reset */
	reg = read32(GCC_USB3_RST_CTRL);
	reg = reg  & ~0x20;
	write32(GCC_USB3_RST_CTRL, reg);
}

void setup_dwc3(void)
{
	u32 reg;
	u32 revision;

	revision = read32(USB_HOST3_PHY_BASE + DWC3_GSNPSID);
	/* This should read as U3 followed by revision number */
	if ((revision & DWC3_GSNPSID_MASK) != 0x55330000)
		printk(BIOS_INFO, "Error in reading Version\n");

	printk(BIOS_INFO, "Version = %x\n", revision);

	/* issue device SoftReset too */
	write32(USB_HOST3_PHY_BASE + DWC3_DCTL, DWC3_DCTL_CSFTRST);
	do {
		reg = read32(USB_HOST3_PHY_BASE + DWC3_DCTL);
		if (!(reg & DWC3_DCTL_CSFTRST))
			break;

		udelay(10);
	} while (true);
	printk(BIOS_INFO, "software reset done\n");

	/* Before Resetting PHY, put Core in Reset */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GCTL);
	reg |= DWC3_GCTL_CORESOFTRESET;
	write32(USB_HOST3_PHY_BASE + DWC3_GCTL, reg);

	/* Assert USB3 PHY reset */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GUSB3PIPECTL(0));
	reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
	write32(USB_HOST3_PHY_BASE + DWC3_GUSB3PIPECTL(0), reg);

	/* Assert USB2 PHY reset */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GUSB2PHYCFG(0));
	reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
	write32(USB_HOST3_PHY_BASE + DWC3_GUSB2PHYCFG(0), reg);

	qcom_baldur_hs_phy_init();
	qcom_uni_ss_phy_init();
	mdelay(100);

	/* Clear USB3 PHY reset */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GUSB3PIPECTL(0));
	reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
	write32(USB_HOST3_PHY_BASE + DWC3_GUSB3PIPECTL(0), reg);

	/* Clear USB2 PHY reset */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GUSB2PHYCFG(0));
	reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
	write32(USB_HOST3_PHY_BASE + DWC3_GUSB2PHYCFG(0), reg);

	mdelay(100);

	/* After PHYs are stable we can take Core out of reset state */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GCTL);
	reg &= ~DWC3_GCTL_CORESOFTRESET;
	write32(USB_HOST3_PHY_BASE + DWC3_GCTL, reg);

#if 0
	/* Enable Suspend USB2.0 HS/FS/LS PHY (SusPHY) */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GUSB2PHYCFG(0));
	reg |= DWC3_GUSB2PHYCFG_SUSPHY;
	write32(USB_HOST3_PHY_BASE + DWC3_GUSB2PHYCFG(0), reg);

	/* Enable Suspend USB3.0 SS PHY (Suspend_en) */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GUSB3PIPECTL(0));
	reg |= DWC3_GUSB3PIPECTL_SUSPHY;
	write32(USB_HOST3_PHY_BASE + DWC3_GUSB3PIPECTL(0), reg);
#endif

	/* configure controller in Host mode */
	reg = read32(USB_HOST3_PHY_BASE + DWC3_GCTL);
	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
	reg |= DWC3_GCTL_PRTCAPDIR(0x1); /* host mode */
	write32(USB_HOST3_PHY_BASE + DWC3_GCTL, reg);
	printk(BIOS_INFO, "USB Host mode reg = %x\n", reg);

	reg = read32(USB_HOST3_PHY_BASE + DWC3_GCTL);
	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
	reg &= ~DWC3_GCTL_DISSCRAMBLE;

	reg &= ~DWC3_GCTL_DSBLCLKGTNG;
	/*
	 * WORKAROUND: DWC3 revisions <1.90a have a bug
	 * where the device can fail to connect at SuperSpeed
	 * and falls back to high-speed mode which causes
	 * the device to enter a Connect/Disconnect loop
	 */
	if (revision < DWC3_REVISION_190A)
		reg |= DWC3_GCTL_U2RSTECN;

	write32(USB_HOST3_PHY_BASE + DWC3_GCTL, reg);
}

void setup_usb_host1(void)
{
	printk(BIOS_INFO, "Setting up USB HOST1 controller.\n");
	setup_dwc3();
	dwc3_ipq40xx_enable_vbus_valid();
}