summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/qcs405/usb.c
blob: 19d1e0e3e77cb028d116ccb085e3cd9a97f25e50 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
/* SPDX-License-Identifier: GPL-2.0-only */

#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <soc/usb.h>
#include <soc/clock.h>
#include <types.h>

/* USB BASE ADDRESS */
#define USB_HOST0_DWC3_BASE		0x758C100
#define USB3_USB30_QSCRATCH_BASE	0x7678800
#define USB2_FEMTO_PHY_PRI_BASE		0x007A000
#define USB_HOST1_DWC3_BASE		0x78CC100
#define USB2_USB30_QSCRATCH_BASE	0x79B8800
#define USB2_FEMTO_PHY_SEC_BASE		0x007C000

struct usb_qscratch {
	u8 rsvd0[8];
	u32 *qscratch_cfg_reg;

};
check_member(usb_qscratch, qscratch_cfg_reg, 0x08);

struct usb_usb2_phy_dig {
	u8 rsvd1[116];
	u32 utmi_ctrl5;
	u32 ctrl_common0;
	u32 ctrl_common1;
	u8 rsvd2[12];
	u32 phy_ctrl1;
	u32 phy_ctrl2;
	u8 rsvd3;
	u32 override_x0;
	u32 override_x1;
	u32 override_x2;
	u32 override_x3;
	u8 rsvd4[24];
	u32 tcsr_ctrl;
	u8 rsvd5[36];
	u32 refclk_ctrl;
};
check_member(usb_usb2_phy_dig, utmi_ctrl5, 0x74);
check_member(usb_usb2_phy_dig, phy_ctrl1, 0x8C);
check_member(usb_usb2_phy_dig, override_x0, 0x98);
check_member(usb_usb2_phy_dig, tcsr_ctrl, 0xC0);
check_member(usb_usb2_phy_dig, refclk_ctrl, 0xE8);

struct usb_dwc3 {
	u32 sbuscfg0;
	u32 sbuscfg1;
	u32 txthrcfg;
	u32 rxthrcfg;
	u32 ctl;
	u32 pmsts;
	u32 sts;
	u32 uctl1;
	u32 snpsid;
	u32 gpio;
	u32 uid;
	u32 uctl;
	u64 buserraddr;
	u64 prtbimap;
	u8 reserved1[32];
	u32 dbgfifospace;
	u32 dbgltssm;
	u32 dbglnmcc;
	u32 dbgbmu;
	u32 dbglspmux;
	u32 dbglsp;
	u32 dbgepinfo0;
	u32 dbgepinfo1;
	u64 prtbimap_hs;
	u64 prtbimap_fs;
	u8 reserved2[112];
	u32 usb2phycfg;
	u8 reserved3[60];
	u32 usb2i2cctl;
	u8 reserved4[60];
	u32 usb2phyacc;
	u8 reserved5[60];
	u32 usb3pipectl;
	u8 reserved6[60];
};
check_member(usb_dwc3, usb3pipectl, 0x1c0);

struct usb_dwc3_cfg {
	struct usb_dwc3 *usb_host_dwc3;
	struct usb_usb2_phy_dig *usb2_phy_dig;
	struct usb_qscratch *usb_qscratch_reg;
	u32 *usb2_phy_bcr;
	u32 *usb2_phy_por_bcr;
	u32 *usb3_bcr;
	struct usb_board_data *board_data;
};

static struct usb_dwc3_cfg usb_host_base[2] = {
	[HSUSB_SS_PORT_0] = {
	.usb_host_dwc3 =	(void *)USB_HOST0_DWC3_BASE,
	.usb2_phy_dig  =	(void *)USB2_FEMTO_PHY_PRI_BASE,
	.usb2_phy_bcr =		(void *)GCC_USB_HS_PHY_CFG_AHB_BCR,
	.usb2_phy_por_bcr =	(void *)GCC_USB2A_PHY_BCR,
	.usb3_bcr =		(void *)GCC_USB_30_BCR,
	.usb_qscratch_reg =	(void *)USB3_USB30_QSCRATCH_BASE,
	},
	[HSUSB_HS_PORT_1] = {
	.usb_host_dwc3 =	(void *)USB_HOST1_DWC3_BASE,
	.usb2_phy_dig  =	(void *)USB2_FEMTO_PHY_SEC_BASE,
	.usb2_phy_bcr =		(void *)GCC_QUSB2_PHY_BCR,
	.usb2_phy_por_bcr =	(void *)GCC_USB2_HS_PHY_ONLY_BCR,
	.usb3_bcr =		(void *)GCC_USB_HS_BCR,
	.usb_qscratch_reg =	(void *)USB2_USB30_QSCRATCH_BASE,
	},
};

void reset_usb(enum usb_port port)
{
	struct usb_dwc3_cfg *dwc3 = &usb_host_base[port];

	/* Put Core in Reset */
	printk(BIOS_INFO, "Starting DWC3 reset for USB%d\n", port);

	/* Assert Core reset */
	clock_reset_bcr(dwc3->usb3_bcr, 1);
}

static void usb2_phy_override_phy_params(struct usb_dwc3_cfg *dwc3)
{
	/* Override disconnect & squelch threshold values */
	write8(&dwc3->usb2_phy_dig->override_x0,
			dwc3->board_data->parameter_override_x0);

	/* Override HS transmitter Pre-emphasis values */
	write8(&dwc3->usb2_phy_dig->override_x1,
			dwc3->board_data->parameter_override_x1);

	/* Override HS transmitter Rise/Fall time values */
	write8(&dwc3->usb2_phy_dig->override_x2,
			dwc3->board_data->parameter_override_x2);

	/* Override FS/LS Source impedance values */
	write8(&dwc3->usb2_phy_dig->override_x3,
			dwc3->board_data->parameter_override_x3);
}

static void hs_usb_phy_init(struct usb_dwc3_cfg *dwc3)
{
	write8(&dwc3->usb2_phy_dig->tcsr_ctrl, USB2PHY_TCSR_CTRL);
	write8(&dwc3->usb2_phy_dig->refclk_ctrl, USB2PHY_REFCLK_CTRL);
	write8(&dwc3->usb2_phy_dig->utmi_ctrl5, USB2PHY_UTMI_CTRL5);
	write8(&dwc3->usb2_phy_dig->override_x0, USB2PHY_PARAMETER_OVERRIDE_X0);
	write8(&dwc3->usb2_phy_dig->override_x1, USB2PHY_PARAMETER_OVERRIDE_X1);
	write8(&dwc3->usb2_phy_dig->override_x2, USB2PHY_PARAMETER_OVERRIDE_X2);
	write8(&dwc3->usb2_phy_dig->override_x3, USB2PHY_PARAMETER_OVERRIDE_X3);

	if (dwc3->board_data)
		/* Override board specific PHY tuning values */
		usb2_phy_override_phy_params(dwc3);

	write8(&dwc3->usb2_phy_dig->phy_ctrl1, USB2PHY_HS_PHY_CTRL1);
	write8(&dwc3->usb2_phy_dig->ctrl_common0, QUSB2PHY_HS_PHY_CTRL_COMMON0);
	write8(&dwc3->usb2_phy_dig->ctrl_common1, QUSB2PHY_HS_PHY_CTRL_COMMON1);
	write8(&dwc3->usb2_phy_dig->phy_ctrl2, USB2PHY_HS_PHY_CTRL2);
	udelay(20);
	write8(&dwc3->usb2_phy_dig->utmi_ctrl5, USB2PHY_UTMI_CTRL5_POR_CLEAR);
	write8(&dwc3->usb2_phy_dig->phy_ctrl2,
					USB2PHY_HS_PHY_CTRL2_SUSPEND_N_SEL);
}

static void setup_dwc3(struct usb_dwc3 *dwc3)
{
	/* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */
	clrsetbits32(&dwc3->usb3pipectl,
		DWC3_GUSB3PIPECTL_DELAYP1TRANS,
		DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX);

	clrsetbits32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK |
			DWC3_GCTL_DISSCRAMBLE),
			DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG);

	/* configure controller in Host mode */
	clrsetbits32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)),
			DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST));
	printk(BIOS_INFO, "Configure USB in Host mode\n");
}

/* Initialization of DWC3 Core and PHY */
void setup_usb_host(enum usb_port port, struct usb_board_data *board_data)
{
	struct usb_dwc3_cfg *dwc3 = &usb_host_base[port];
	u32 val;

	printk(BIOS_INFO, "Setting up USB HOST%d controller.\n", port);

	dwc3->board_data = board_data;

	 /* Clear core reset. */
	clock_reset_bcr(dwc3->usb3_bcr, 0);

	if (port == HSUSB_SS_PORT_0) {
		/* Set PHY reset. */
		setbits32(&dwc3->usb2_phy_bcr, BIT(1));
		udelay(15);
		/* Clear PHY reset. */
		clrbits32(&dwc3->usb2_phy_bcr, BIT(1));
	} else {
		clock_reset_bcr(dwc3->usb2_phy_bcr, 1);
		udelay(15);
		clock_reset_bcr(dwc3->usb2_phy_bcr, 0);
	}
	udelay(100);

	/* Initialize PHYs */
	hs_usb_phy_init(dwc3);

	if (port == HSUSB_SS_PORT_0) {
		/* Set PHY POR reset. */
		setbits32(&dwc3->usb2_phy_por_bcr, BIT(0));
		val = read8(&dwc3->usb2_phy_dig->ctrl_common0);
		val &= ~(0x4);
		write8(&dwc3->usb2_phy_dig->ctrl_common0, val);
		udelay(20);
		/* Clear PHY POR reset. */
		clrbits32(&dwc3->usb2_phy_por_bcr, BIT(0));
	} else {
		clock_reset_bcr(dwc3->usb2_phy_por_bcr, 1);
		val = read8(&dwc3->usb2_phy_dig->ctrl_common0);
		val &= ~(0x4);
		write8(&dwc3->usb2_phy_dig->ctrl_common0, val);
		udelay(20);
		clock_reset_bcr(dwc3->usb2_phy_por_bcr, 0);
	}
	udelay(100);

	setup_dwc3(dwc3->usb_host_dwc3);

	/*
	 * Below sequence is used when dwc3 operates without
	 * SSPHY and only HS/FS/LS modes are supported.
	 */

	 /* Configure dwc3 to use UTMI clock as PIPE clock not present */
	setbits32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
			PIPE_UTMI_CLK_DIS);
	udelay(2);
	setbits32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
			PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
	udelay(3);
	clrbits32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
			PIPE_UTMI_CLK_DIS);

	printk(BIOS_INFO, "DWC3 and PHY setup finished\n");
}