1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <device/mmio.h>
#include <stddef.h>
#include <soc/addressmap.h>
#include <soc/clock.h>
#include <soc/edp.h>
#include <soc/vop.h>
static struct rockchip_vop_regs * const vop_regs[] = {
(struct rockchip_vop_regs *)VOP_BIG_BASE,
(struct rockchip_vop_regs *)VOP_LIT_BASE
};
void rkvop_enable(u32 vop_id, u32 fbbase)
{
struct rockchip_vop_regs *preg = vop_regs[vop_id];
write32(&preg->win0_yrgb_mst, fbbase);
/* On RK3288, the reg_cfg_done[1:31] is reserved and read-only,
* but it's fine to write to it
*/
write32(&preg->reg_cfg_done, 0xffff); /* enable reg config */
}
void rkvop_prepare(u32 vop_id, const struct edid *edid)
{
u32 lb_mode;
u32 rgb_mode;
u32 hactive = edid->mode.ha;
u32 vactive = edid->mode.va;
u32 hsync_len = edid->mode.hspw;
u32 hback_porch = edid->mode.hbl - edid->mode.hso - edid->mode.hspw;
u32 vsync_len = edid->mode.vspw;
u32 vback_porch = edid->mode.vbl - edid->mode.vso - edid->mode.vspw;
u32 xpos = 0, ypos = 0;
struct rockchip_vop_regs *preg = vop_regs[vop_id];
write32(&preg->win0_act_info,
V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1));
write32(&preg->win0_dsp_st, V_DSP_XST(xpos + hsync_len + hback_porch) |
V_DSP_YST(ypos + vsync_len + vback_porch));
write32(&preg->win0_dsp_info, V_DSP_WIDTH(hactive - 1) |
V_DSP_HEIGHT(vactive - 1));
clrsetbits32(&preg->win0_color_key, M_WIN0_KEY_EN | M_WIN0_KEY_COLOR,
V_WIN0_KEY_EN(0) |
V_WIN0_KEY_COLOR(0));
switch (edid->framebuffer_bits_per_pixel) {
case 16:
rgb_mode = RGB565;
write32(&preg->win0_vir, V_RGB565_VIRWIDTH(hactive));
break;
case 24:
rgb_mode = RGB888;
write32(&preg->win0_vir, V_RGB888_VIRWIDTH(hactive));
break;
case 32:
default:
rgb_mode = ARGB8888;
write32(&preg->win0_vir, V_ARGB888_VIRWIDTH(hactive));
break;
}
if (hactive > 2560)
lb_mode = LB_RGB_3840X2;
else if (hactive > 1920)
lb_mode = LB_RGB_2560X4;
else if (hactive > 1280)
lb_mode = LB_RGB_1920X5;
else
lb_mode = LB_RGB_1280X8;
clrsetbits32(&preg->win0_ctrl0,
M_WIN0_LB_MODE | M_WIN0_DATA_FMT | M_WIN0_EN,
V_WIN0_LB_MODE(lb_mode) |
V_WIN0_DATA_FMT(rgb_mode) | V_WIN0_EN(1));
}
void rkvop_mode_set(u32 vop_id, const struct edid *edid, u32 mode)
{
u32 hactive = edid->mode.ha;
u32 vactive = edid->mode.va;
u32 hfront_porch = edid->mode.hso;
u32 hsync_len = edid->mode.hspw;
u32 hback_porch = edid->mode.hbl - edid->mode.hso - edid->mode.hspw;
u32 vfront_porch = edid->mode.vso;
u32 vsync_len = edid->mode.vspw;
u32 vback_porch = edid->mode.vbl - edid->mode.vso - edid->mode.vspw;
u32 dsp_out_mode;
struct rockchip_vop_regs *preg = vop_regs[vop_id];
switch (mode) {
case VOP_MODE_HDMI:
clrsetbits32(&preg->sys_ctrl,
M_ALL_OUT_EN, V_HDMI_OUT_EN(1));
dsp_out_mode = 15;
break;
case VOP_MODE_MIPI:
clrsetbits32(&preg->sys_ctrl, M_ALL_OUT_EN,
V_MIPI_OUT_EN(1));
dsp_out_mode = 0;
break;
case VOP_MODE_DUAL_MIPI:
clrsetbits32(&preg->sys_ctrl, M_ALL_OUT_EN,
V_MIPI_OUT_EN(1) | V_DUAL_MIPI_EN(1));
dsp_out_mode = 0;
break;
case VOP_MODE_EDP:
default:
clrsetbits32(&preg->sys_ctrl,
M_ALL_OUT_EN, V_EDP_OUT_EN(1));
dsp_out_mode = 15;
break;
}
clrsetbits32(&preg->dsp_ctrl0,
M_DSP_OUT_MODE | M_DSP_VSYNC_POL |
M_DSP_HSYNC_POL,
V_DSP_OUT_MODE(dsp_out_mode) |
V_DSP_HSYNC_POL(edid->mode.phsync == '+') |
V_DSP_VSYNC_POL(edid->mode.pvsync == '+'));
write32(&preg->dsp_htotal_hs_end, V_HSYNC(hsync_len) |
V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch));
write32(&preg->dsp_hact_st_end,
V_HEAP(hsync_len + hback_porch + hactive) |
V_HASP(hsync_len + hback_porch));
write32(&preg->dsp_vtotal_vs_end, V_VSYNC(vsync_len) |
V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch));
write32(&preg->dsp_vact_st_end,
V_VAEP(vsync_len + vback_porch + vactive) |
V_VASP(vsync_len + vback_porch));
write32(&preg->post_dsp_hact_info,
V_HEAP(hsync_len + hback_porch + hactive) |
V_HASP(hsync_len + hback_porch));
write32(&preg->post_dsp_vact_info,
V_VAEP(vsync_len + vback_porch + vactive) |
V_VASP(vsync_len + vback_porch));
/* On RK3288, the reg_cfg_done[1:31] is reserved and read-only,
* but it's fine to write to it
*/
write32(&preg->reg_cfg_done, 0xffff); /* enable reg config */
}
|
