summaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399/display.c
blob: c7ca8916baa17716e4aaa7d273296338fdfa032d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
/*
 * This file is part of the coreboot project.
 *
 * Copyright 2016 Rockchip Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <arch/cache.h>
#include <arch/mmu.h>
#include <arch/io.h>
#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <edid.h>
#include <gpio.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <soc/addressmap.h>
#include <soc/clock.h>
#include <soc/display.h>
#include <soc/edp.h>
#include <soc/gpio.h>
#include <soc/grf.h>
#include <soc/mmu_operations.h>
#include <soc/soc.h>
#include <soc/vop.h>

#include "chip.h"

static void reset_edp(void)
{
	/* rst edp */
	write32(&cru_ptr->softrst_con[17],
		RK_SETBITS(1 << 12 | 1 << 13));
		udelay(1);
	write32(&cru_ptr->softrst_con[17],
		RK_CLRBITS(1 << 12 | 1 << 13));
	printk(BIOS_WARNING, "Retrying epd initialization.\n");
}

void rk_display_init(device_t dev)
{
	struct edid edid;
	struct soc_rockchip_rk3399_config *conf = dev->chip_info;
	enum vop_modes detected_mode = VOP_MODE_UNKNOWN;
	int retry_count = 0;

	/* let's use vop0 in rk3399 */
	uint32_t vop_id = 0;

	switch (conf->vop_mode) {
	case VOP_MODE_NONE:
		return;
	case VOP_MODE_AUTO_DETECT:
		/* try EDP first, then HDMI */
	case VOP_MODE_EDP:
		printk(BIOS_DEBUG, "Attempting to set up EDP display.\n");
		rkclk_configure_vop_aclk(vop_id, 200 * MHz);
		rkclk_configure_edp(25 * MHz);

		/* select edp signal from vop0 */
		write32(&rk3399_grf->soc_con20, RK_CLRBITS(1 << 5));

		/* select edp clk from SoC internal 24M crystal, otherwise,
		 * it will source from edp's 24M clock (that depends on
		 * edp vendor, could be unstable)
		 */
		write32(&rk3399_grf->soc_con25, RK_SETBITS(1 << 11));

retry_edp:
		while (retry_count++ < 3) {
			rk_edp_init();
			if (rk_edp_get_edid(&edid) == 0) {
				detected_mode = VOP_MODE_EDP;
				break;
			}
			if (retry_count == 3) {
				printk(BIOS_WARNING, "Warning: epd initialization failed.\n");
				return;
			} else {
				reset_edp();
			}
		}
		break;
	case VOP_MODE_HDMI:
		printk(BIOS_WARNING, "HDMI display is NOT supported yet.\n");
		return;
	default:
		printk(BIOS_WARNING, "Cannot read any EDID info, aborting.\n");
		return;
	}

	if (rkclk_configure_vop_dclk(vop_id,
				     edid.mode.pixel_clock * KHz)) {
		printk(BIOS_WARNING, "config vop err\n");
		return;
	}

	edid_set_framebuffer_bits_per_pixel(&edid,
		conf->framebuffer_bits_per_pixel, 0);
	rkvop_mode_set(vop_id, &edid, detected_mode);

	rkvop_prepare(vop_id, &edid);

	switch (detected_mode) {
	case VOP_MODE_HDMI:
		/* should not be here before HDMI supported */
		return;
	case VOP_MODE_EDP:
	default:
		/* will enable edp in depthcharge */
		if (rk_edp_prepare()) {
			reset_edp();
			goto retry_edp; /* Rerun entire init sequence */
		}
		mainboard_power_on_backlight();
		break;
	}

	set_vbe_mode_info_valid(&edid, (uintptr_t)0);
	return;
}