summaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399/usb.c
blob: 78facb50507a532a77c9a1962877393e95f2bb42 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2016 Rockchip, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <device/mmio.h>
#include <assert.h>
#include <console/console.h>
#include <delay.h>
#include <soc/clock.h>
#include <soc/grf.h>
#include <soc/soc.h>
#include <soc/usb.h>

/* SuperSpeed over Type-C is hard. We don't care about speed in firmware: just
 * gate off the SuperSpeed lines to have an unimpaired USB 2.0 connection. */
static void isolate_tcphy(struct rk3399_tcphy *tcphy)
{
	write32(&tcphy->isolation_ctrl,
		TCPHY_ISOLATION_CTRL_EN |
		TCPHY_ISOLATION_CTRL_CMN_EN |
		TCPHY_ISOLATION_CTRL_MODE_SEL |
		TCPHY_ISOLATION_CTRL_LN_EN(7) |
		TCPHY_ISOLATION_CTRL_LN_EN(6) |
		TCPHY_ISOLATION_CTRL_LN_EN(5) |
		TCPHY_ISOLATION_CTRL_LN_EN(4) |
		TCPHY_ISOLATION_CTRL_LN_EN(3) |
		TCPHY_ISOLATION_CTRL_LN_EN(2) |
		TCPHY_ISOLATION_CTRL_LN_EN(1) |
		TCPHY_ISOLATION_CTRL_LN_EN(0));
}

static void tcphy_cfg_24m(struct rk3399_tcphy *tcphy)
{
	u32 i;

	/* cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
	 * cmn_psm_clk_dig_div = 2, set the clk division to 2 */
	write32(&tcphy->pma_cmn_ctrl1, 2 << 10 | 3 << 4);
	for (i = 0; i < 4; i++) {
		/* The following PHY configuration assumes a
		 * 24 MHz reference clock */
		write32(&tcphy->lane[i].xcvr_diag_lane_fcm_en_mgn, 0x90);
		write32(&tcphy->lane[i].tx_rcvdet_en_tmr, 0x960);
		write32(&tcphy->lane[i].tx_rcvdet_st_tmr, 0x30);
	}

	clrsetbits_le32(&tcphy->cmn_diag_hsclk_sel,
			TCPHY_CMN_HSCLK_PLL_MASK, TCPHY_CMN_HSCLK_PLL_CONFIG);
}

static void tcphy_phy_init(struct rk3399_tcphy *tcphy)
{
	u32 i;

	tcphy_cfg_24m(tcphy);

	for (i = 0; i < 4; i++) {
		/* Enable transmitter reset pull down override for all lanes*/
		write32(&tcphy->lane[i].tx_diag_tx_drv, 0x2000);
		/* Disable transmitter low current mode, disable TX
		 * driver common mode, disable TX post-emphasis*/
		write32(&tcphy->lane[i].tx_psc_a2, 0x0000);
	}

	isolate_tcphy(tcphy);
}

static void reset_dwc3(struct rockchip_usb_dwc3 *dwc3)
{
	/* Before Resetting PHY, put Core in Reset */
	setbits_le32(&dwc3->ctl, DWC3_GCTL_CORESOFTRESET);
	/* Assert USB3 PHY reset */
	setbits_le32(&dwc3->usb3pipectl, DWC3_GUSB3PIPECTL_PHYSOFTRST);
	/* Assert USB2 PHY reset */
	setbits_le32(&dwc3->usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
}

static void setup_dwc3(struct rockchip_usb_dwc3 *dwc3)
{
	u32 usb2phycfg = read32(&dwc3->usb2phycfg);
	u32 ctl = read32(&dwc3->ctl);

	/* Ensure reset_dwc3() has been called before this. */
	assert(ctl & DWC3_GCTL_CORESOFTRESET);

	/* Clear USB3 PHY reset (oddly enough, this is really necessary). */
	clrbits_le32(&dwc3->usb3pipectl, DWC3_GUSB3PIPECTL_PHYSOFTRST);

	/* Clear USB2 PHY and core reset. */
	usb2phycfg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
	ctl &= ~DWC3_GCTL_CORESOFTRESET;

	/* We are hard-coding DWC3 core to Host Mode */
	ctl &= ~DWC3_GCTL_PRTCAP_MASK;
	ctl |= DWC3_GCTL_PRTCAP_HOST;

	/*
	 * Configure USB phy interface of DWC3 core.
	 * For Rockchip rk3399 SOC DWC3 core:
	 * 1. Clear U2_FREECLK_EXITS.
	 * 2. Select UTMI+ PHY with 16-bit interface.
	 * 3. Set USBTRDTIM to the corresponding value
	 * according to the UTMI+ PHY interface.
	 */
	usb2phycfg &= ~(DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS |
			DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK |
			DWC3_GUSB2PHYCFG_PHYIF_MASK);
	usb2phycfg |= DWC3_GUSB2PHYCFG_PHYIF(1) |
		      DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);

	write32(&dwc3->usb2phycfg, usb2phycfg);
	write32(&dwc3->ctl, ctl);
}

void reset_usb_otg0(void)
{
	printk(BIOS_DEBUG, "Starting DWC3 and TCPHY reset for USB OTG0\n");

	/* Keep whole USB OTG0 controller in reset, then
	 * configure controller to work in USB 2.0 only mode. */
	write32(&cru_ptr->softrst_con[18], RK_SETBITS(1 << 5));
	write32(&rk3399_grf->usb3otg0_con1, RK_CLRSETBITS(0xf << 12, 1 << 0));
	write32(&cru_ptr->softrst_con[18], RK_CLRBITS(1 << 5));

	tcphy_phy_init(rockchip_usb_otg0_phy);

	/* Clear TCPHY0 reset */
	write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 5));

	reset_dwc3(rockchip_usb_otg0_dwc3);
}

void reset_usb_otg1(void)
{
	printk(BIOS_DEBUG, "Starting DWC3 and TCPHY reset for USB OTG1\n");

	/* Keep whole USB OTG1 controller in reset, then
	 * configure controller to work in USB 2.0 only mode. */
	write32(&cru_ptr->softrst_con[18], RK_SETBITS(1 << 6));
	write32(&rk3399_grf->usb3otg1_con1, RK_CLRSETBITS(0xf << 12, 1 << 0));
	write32(&cru_ptr->softrst_con[18], RK_CLRBITS(1 << 6));

	tcphy_phy_init(rockchip_usb_otg1_phy);

	/* Clear TCPHY1 reset */
	write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 13));

	reset_dwc3(rockchip_usb_otg1_dwc3);
}

void setup_usb_otg0(void)
{
	/* Clear pipe reset */
	write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 4));

	setup_dwc3(rockchip_usb_otg0_dwc3);
	printk(BIOS_DEBUG, "DWC3 and TCPHY setup for USB OTG0 finished\n");
}

void setup_usb_otg1(void)
{
	/* Clear pipe reset */
	write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 12));

	setup_dwc3(rockchip_usb_otg1_dwc3);
	printk(BIOS_DEBUG, "DWC3 and TCPHY setup for USB OTG1 finished\n");
}