summaryrefslogtreecommitdiff
path: root/src/soc/sifive/fu540/clock.c
blob: 4b52c5668627712211eeb7bba2db5b246f178941 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
/*
 * This file is part of the coreboot project.
 *
 * Copyright 2018 Philipp Hug <philipp@hug.cx>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <device/mmio.h>
#include <console/console.h>
#include <soc/clock.h>
#include <soc/addressmap.h>
#include <stdlib.h>
#include <stdint.h>

// 33.33 Mhz after reset
#define FU540_BASE_FQY 33330

struct prci_ctlr {
	u32 hfxosccfg;		/* offset 0x00 */
	u32 corepllcfg0;	/* offset 0x04 */
	u32 reserved08;		/* offset 0x08 */
	u32 ddrpllcfg0;		/* offset 0x0c */
	u32 ddrpllcfg1;		/* offset 0x10 */
	u32 reserved14;		/* offset 0x14 */
	u32 reserved18;		/* offset 0x18 */
	u32 gemgxlpllcfg0;	/* offset 0x1c */
	u32 gemgxlpllcfg1;	/* offset 0x20 */
	u32 coreclksel;		/* offset 0x24 */
	u32 devicesresetreg;	/* offset 0x28 */
};

static struct prci_ctlr *prci = (void *)FU540_PRCI;

#define PRCI_CORECLK_MASK 1
#define PRCI_CORECLK_CORE_PLL 0
#define PRCI_CORECLK_HFCLK 1

#define PRCI_PLLCFG_LOCK (1u << 31)
#define PRCI_PLLCFG_DIVR_SHIFT 0
#define PRCI_PLLCFG_DIVF_SHIFT 6
#define PRCI_PLLCFG_DIVQ_SHIFT 15
#define PRCI_PLLCFG_RANGE_SHIFT 18
#define PRCI_PLLCFG_BYPASS_SHIFT 24
#define PRCI_PLLCFG_FSE_SHIFT 25
#define PRCI_PLLCFG_DIVR_MASK (0x03f << PRCI_PLLCFG_DIVR_SHIFT)
#define PRCI_PLLCFG_DIVF_MASK (0x1ff << PRCI_PLLCFG_DIVF_SHIFT)
#define PRCI_PLLCFG_DIVQ_MASK (0x007 << PRCI_PLLCFG_DIVQ_SHIFT)
#define PRCI_PLLCFG_RANGE_MASK (0x07 << PRCI_PLLCFG_RANGE_SHIFT)
#define PRCI_PLLCFG_BYPASS_MASK (0x1 << PRCI_PLLCFG_BYPASS_SHIFT)
#define PRCI_PLLCFG_FSE_MASK (0x1 << PRCI_PLLCFG_FSE_SHIFT)

#define PRCI_DDRPLLCFG1_MASK (1u << 31)

#define PRCI_CORECLKSEL_CORECLKSEL 1

#define PRCI_DEVICESRESET_DDR_CTRL_RST_N(x) (((x) & 0x1)  << 0)
#define PRCI_DEVICESRESET_DDR_AXI_RST_N(x)  (((x) & 0x1)  << 1)
#define PRCI_DEVICESRESET_DDR_AHB_RST_N(x)  (((x) & 0x1)  << 2)
#define PRCI_DEVICESRESET_DDR_PHY_RST_N(x)  (((x) & 0x1)  << 3)
#define PRCI_DEVICESRESET_GEMGXL_RST_N(x)   (((x) & 0x1)  << 5)

/* Clock initialization should only be done in romstage. */
#if ENV_ROMSTAGE
struct pll_settings {
	unsigned int divr:6;
	unsigned int divf:9;
	unsigned int divq:3;
	unsigned int range:3;
	unsigned int bypass:1;
	unsigned int fse:1;
};

static void configure_pll(u32 *reg, const struct pll_settings *s)
{
	// Write the settings to the register
	u32 c = read32(reg);
	clrsetbits_le32(&c, PRCI_PLLCFG_DIVR_MASK
		| PRCI_PLLCFG_DIVF_MASK | PRCI_PLLCFG_DIVQ_MASK
		| PRCI_PLLCFG_RANGE_MASK | PRCI_PLLCFG_BYPASS_MASK
		| PRCI_PLLCFG_FSE_MASK,
		(s->divr << PRCI_PLLCFG_DIVR_SHIFT)
		| (s->divf << PRCI_PLLCFG_DIVF_SHIFT)
		| (s->divq << PRCI_PLLCFG_DIVQ_SHIFT)
		| (s->range << PRCI_PLLCFG_RANGE_SHIFT)
		| (s->bypass << PRCI_PLLCFG_BYPASS_SHIFT)
		| (s->fse << PRCI_PLLCFG_FSE_SHIFT));
	write32(reg, c);

	// Wait for PLL lock
	while (!(read32(reg) & PRCI_PLLCFG_LOCK))
		; /* TODO: implement a timeout */
}

/*
 * Set coreclk according to the SiFive FU540-C000 Manual
 * https://www.sifive.com/documentation/chips/freedom-u540-c000-manual/
 *
 * Section 7.1 recommends a frequency of 1.0 GHz (up to 1.5 Ghz is possible)
 *
 * Section 7.4.2 provides the necessary values:
 * For example, to setup COREPLL for 1 GHz operation, program divr = 0 (x1),
 * divf = 59 (4000 MHz VCO), divq = 2 (/4 Output divider)
 */
static const struct pll_settings corepll_settings = {
	.divr = 0,
	.divf = 59,
	.divq = 2,
	.range = 4,
	.bypass = 0,
	.fse = 1,
};

/*
 * Section 7.4.3: DDR and Ethernet Subsystem Clocking and Reset
 *
 * Unfortunately the documentation example doesn't match the HiFive
 * Unleashed board settings.
 * Configuration values taken from SiFive FSBL:
 * https://github.com/sifive/freedom-u540-c000-bootloader/blob/master/fsbl/main.c
 *
 * DDRPLL is set up for 933 MHz output frequency.
 * divr = 0, divf = 55 (3730 MHz VCO), divq = 2
 *
 * GEMGXLPLL is set up for 125 MHz output frequency.
 * divr = 0, divf = 59 (4000 MHz VCO), divq = 5
 */
static const struct pll_settings ddrpll_settings = {
	.divr = 0,
	.divf = 55,
	.divq = 2,
	.range = 4,
	.bypass = 0,
	.fse = 1,
};

static void init_coreclk(void)
{
	// switch coreclk to input reference frequency before modifying PLL
	clrsetbits_le32(&prci->coreclksel, PRCI_CORECLK_MASK,
		PRCI_CORECLK_HFCLK);

	configure_pll(&prci->corepllcfg0, &corepll_settings);

	// switch coreclk to use corepll
	clrsetbits_le32(&prci->coreclksel, PRCI_CORECLK_MASK,
		PRCI_CORECLK_CORE_PLL);
}

static void init_pll_ddr(void)
{
	// disable ddr clock output before reconfiguring the PLL
	u32 cfg1 = read32(&prci->ddrpllcfg1);
	clrbits_le32(&cfg1, PRCI_DDRPLLCFG1_MASK);
	write32(&prci->ddrpllcfg1, cfg1);

	configure_pll(&prci->ddrpllcfg0, &ddrpll_settings);

	// enable ddr clock output
	setbits_le32(&cfg1, PRCI_DDRPLLCFG1_MASK);
	write32(&prci->ddrpllcfg1, cfg1);
}

#define FU540_UART_DEVICES 2
#define FU540_UART_REG_DIV 0x18
#define FU540_UART_DIV_VAL 4

#define FU540_SPI_DIV 0x00
#define FU540_SPI_DIV_VAL 4


static void update_peripheral_clock_dividers(void)
{
	write32((uint32_t *)(FU540_QSPI0 + FU540_SPI_DIV), FU540_SPI_DIV_VAL);
	write32((uint32_t *)(FU540_QSPI1 + FU540_SPI_DIV), FU540_SPI_DIV_VAL);
	write32((uint32_t *)(FU540_QSPI2 + FU540_SPI_DIV), FU540_SPI_DIV_VAL);

	for (size_t i = 0; i < FU540_UART_DEVICES; i++)
		write32((uint32_t *)(FU540_UART(i) + FU540_UART_REG_DIV), FU540_UART_DIV_VAL);
}

void clock_init(void)
{
	/*
	 * Update the peripheral clock dividers of UART, SPI and I2C to safe
	 * values as we can't put them in reset before changing frequency.
	 */
	update_peripheral_clock_dividers();

	init_coreclk();

	// put DDR and ethernet in reset
	write32(&prci->devicesresetreg, 0);

	init_pll_ddr();

	// The following code and its comments is mostly derived from the SiFive
	// u540 bootloader.
	// https://github.com/sifive/freedom-u540-c000-bootloader

	// get DDR out of reset
	write32(&prci->devicesresetreg, PRCI_DEVICESRESET_DDR_CTRL_RST_N(1));

	// HACK to get the '1 full controller clock cycle'.
	asm volatile ("fence");

	// get DDR out of reset
	write32(&prci->devicesresetreg,
		PRCI_DEVICESRESET_DDR_CTRL_RST_N(1) |
		PRCI_DEVICESRESET_DDR_AXI_RST_N(1) |
		PRCI_DEVICESRESET_DDR_AHB_RST_N(1) |
		PRCI_DEVICESRESET_DDR_PHY_RST_N(1));

	// HACK to get the '1 full controller clock cycle'.
	asm volatile ("fence");

	// These take like 16 cycles to actually propagate. We can't go sending
	// stuff before they come out of reset. So wait.
	// TODO: Add a register to read the current reset states, or DDR Control
	// device?
	for (int i = 0; i < 256; i++)
		asm volatile ("nop");
}
#endif /* ENV_ROMSTAGE */

/* Get the core clock's frequency, in KHz */
int clock_get_coreclk_khz(void)
{
	if (read32(&prci->coreclksel) & PRCI_CORECLK_MASK)
		return FU540_BASE_FQY;

	u32 cfg  = read32(&prci->corepllcfg0);
	u32 divr = (cfg & PRCI_PLLCFG_DIVR_MASK)
		>> PRCI_PLLCFG_DIVR_SHIFT;
	u32 divf = (cfg & PRCI_PLLCFG_DIVF_MASK)
		>> PRCI_PLLCFG_DIVF_SHIFT;
	u32 divq = (cfg & PRCI_PLLCFG_DIVQ_MASK)
		>> PRCI_PLLCFG_DIVQ_SHIFT;

	printk(BIOS_SPEW, "clk: r=%d f=%d q=%d\n", divr, divf, divq);
	return FU540_BASE_FQY
		* 2 * (divf + 1)
		/ (divr + 1)
		/ (1ul << divq);
}

/* Get the TileLink clock's frequency, in KHz */
int clock_get_tlclk_khz(void)
{
	/*
	 * The TileLink bus and most peripherals use tlclk, which is coreclk/2,
	 * as input.
	 */

	return clock_get_coreclk_khz() / 2;
}