1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
|
/* SPDX-License-Identifier: Apache-2.0 */
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* See the file LICENSE for further information */
#ifndef _SIFIVE_UX00DDR_H
#define _SIFIVE_UX00DDR_H
#ifndef __ASSEMBLER__
#include <stdint.h>
#include <stddef.h>
#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
#define DRAM_CLASS_OFFSET 8
#define DRAM_CLASS_DDR4 0xA
#define OPTIMAL_RMODW_EN_OFFSET 0
#define DISABLE_RD_INTERLEAVE_OFFSET 16
#define OUT_OF_RANGE_OFFSET 1
#define MULTIPLE_OUT_OF_RANGE_OFFSET 2
#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7
#define MC_INIT_COMPLETE_OFFSET 8
#define LEVELING_OPERATION_COMPLETED_OFFSET 22
#define DFI_PHY_WRLELV_MODE_OFFSET 24
#define DFI_PHY_RDLVL_MODE_OFFSET 24
#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0
#define VREF_EN_OFFSET 24
#define PORT_ADDR_PROTECTION_EN_OFFSET 0
#define AXI0_ADDRESS_RANGE_ENABLE 8
#define AXI0_RANGE_PROT_BITS_0_OFFSET 24
#define RDLVL_EN_OFFSET 16
#define RDLVL_GATE_EN_OFFSET 24
#define WRLVL_EN_OFFSET 0
#define PHY_RX_CAL_DQ0_0_OFFSET 0
#define PHY_RX_CAL_DQ1_0_OFFSET 16
static inline void phy_reset(volatile uint32_t *ddrphyreg, const uint32_t *physettings) {
unsigned int i;
for (i=1152;i<=1214;i++) {
uint32_t physet = physettings[i];
/*if (physet!=0)*/ ddrphyreg[i] = physet;
}
for (i=0;i<=1151;i++) {
uint32_t physet = physettings[i];
/*if (physet!=0)*/ ddrphyreg[i] = physet;
}
}
static inline void ux00ddr_writeregmap(size_t ahbregaddr, const uint32_t *ctlsettings, const uint32_t *physettings) {
volatile uint32_t *ddrctlreg = (volatile uint32_t *) ahbregaddr;
volatile uint32_t *ddrphyreg = ((volatile uint32_t *) ahbregaddr) + (0x2000 / sizeof(uint32_t));
unsigned int i;
for (i=0;i<=264;i++) {
uint32_t ctlset = ctlsettings[i];
/*if (ctlset!=0)*/ ddrctlreg[i] = ctlset;
}
phy_reset(ddrphyreg, physettings);
}
static inline void ux00ddr_start(size_t ahbregaddr, size_t filteraddr, size_t ddrend) {
// START register at ddrctl register base offset 0
uint32_t regdata = _REG32(0<<2, ahbregaddr);
regdata |= 0x1;
_REG32(0<<2, ahbregaddr) = regdata;
// WAIT for initialization complete : bit 8 of INT_STATUS (DENALI_CTL_132) 0x210
while ((_REG32(132<<2, ahbregaddr) & (1<<MC_INIT_COMPLETE_OFFSET)) == 0) {}
// Disable the BusBlocker in front of the controller AXI slave ports
volatile uint64_t *filterreg = (volatile uint64_t *)filteraddr;
filterreg[0] = 0x0f00000000000000UL | (ddrend >> 2);
// ^^ RWX + TOR
}
static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t ahbregaddr) {
// Mask off Bit 8 of Interrupt Status
// Bit [8] The MC initialization has been completed
_REG32(136<<2, ahbregaddr) |= (1<<MC_INIT_COMPLETE_OFFSET);
}
static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) {
// Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status
// Bit [2] Multiple accesses outside the defined PHYSICAL memory space have occured
// Bit [1] A memory access outside the defined PHYSICAL memory space has occured
_REG32(136<<2, ahbregaddr) |= ((1<<OUT_OF_RANGE_OFFSET) | (1<<MULTIPLE_OUT_OF_RANGE_OFFSET));
}
static inline void ux00ddr_mask_port_command_error_interrupt(size_t ahbregaddr) {
// Mask off Bit 7 of Interrupt Status
// Bit [7] An error occured on the port command channel
_REG32(136<<2, ahbregaddr) |= (1<<PORT_COMMAND_CHANNEL_ERROR_OFFSET);
}
static inline void ux00ddr_mask_leveling_completed_interrupt(size_t ahbregaddr) {
// Mask off Bit 22 of Interrupt Status
// Bit [22] The leveling operation has completed
_REG32(136<<2, ahbregaddr) |= (1<<LEVELING_OPERATION_COMPLETED_OFFSET);
}
static inline void ux00ddr_setuprangeprotection(size_t ahbregaddr, size_t end_addr) {
_REG32(209<<2, ahbregaddr) = 0x0;
size_t end_addr_16Kblocks = ((end_addr >> 14) & 0x7FFFFF)-1;
_REG32(210<<2, ahbregaddr) = ((uint32_t) end_addr_16Kblocks);
_REG32(212<<2, ahbregaddr) = 0x0;
_REG32(214<<2, ahbregaddr) = 0x0;
_REG32(216<<2, ahbregaddr) = 0x0;
_REG32(224<<2, ahbregaddr) |= (0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET);
_REG32(225<<2, ahbregaddr) = 0xFFFFFFFF;
_REG32(208<<2, ahbregaddr) |= (1 << AXI0_ADDRESS_RANGE_ENABLE);
_REG32(208<<2, ahbregaddr) |= (1 << PORT_ADDR_PROTECTION_EN_OFFSET);
}
static inline void ux00ddr_disableaxireadinterleave(size_t ahbregaddr) {
_REG32(120<<2, ahbregaddr) |= (1<<DISABLE_RD_INTERLEAVE_OFFSET);
}
static inline void ux00ddr_disableoptimalrmodw(size_t ahbregaddr) {
_REG32(21<<2, ahbregaddr) &= (~(1<<OPTIMAL_RMODW_EN_OFFSET));
}
static inline void ux00ddr_enablewriteleveling(size_t ahbregaddr) {
_REG32(170<<2, ahbregaddr) |= ((1<<WRLVL_EN_OFFSET) | (1<<DFI_PHY_WRLELV_MODE_OFFSET));
}
static inline void ux00ddr_enablereadleveling(size_t ahbregaddr) {
_REG32(181<<2, ahbregaddr) |= (1<<DFI_PHY_RDLVL_MODE_OFFSET);
_REG32(260<<2, ahbregaddr) |= (1<<RDLVL_EN_OFFSET);
}
static inline void ux00ddr_enablereadlevelinggate(size_t ahbregaddr) {
_REG32(260<<2, ahbregaddr) |= (1<<RDLVL_GATE_EN_OFFSET);
_REG32(182<<2, ahbregaddr) |= (1<<DFI_PHY_RDLVL_GATE_MODE_OFFSET);
}
static inline void ux00ddr_enablevreftraining(size_t ahbregaddr) {
_REG32(184<<2, ahbregaddr) |= (1<<VREF_EN_OFFSET);
}
static inline uint32_t ux00ddr_getdramclass(size_t ahbregaddr) {
return ((_REG32(0, ahbregaddr) >> DRAM_CLASS_OFFSET) & 0xF);
}
static inline uint64_t ux00ddr_phy_fixup(size_t ahbregaddr) {
// return bitmask of failed lanes
size_t ddrphyreg = ahbregaddr + 0x2000;
uint64_t fails=0;
uint32_t slicebase = 0;
uint32_t dq = 0;
// check errata condition
for (uint32_t slice = 0; slice < 8; slice++) {
uint32_t regbase = slicebase + 34;
for (uint32_t reg = 0 ; reg < 4; reg++) {
uint32_t updownreg = _REG32((regbase+reg)<<2, ddrphyreg);
for (uint32_t bit = 0; bit < 2; bit++) {
uint32_t phy_rx_cal_dqn_0_offset;
if (bit==0) {
phy_rx_cal_dqn_0_offset = PHY_RX_CAL_DQ0_0_OFFSET;
}else{
phy_rx_cal_dqn_0_offset = PHY_RX_CAL_DQ1_0_OFFSET;
}
uint32_t down = (updownreg >> phy_rx_cal_dqn_0_offset) & 0x3F;
uint32_t up = (updownreg >> (phy_rx_cal_dqn_0_offset+6)) & 0x3F;
uint8_t failc0 = ((down == 0) && (up == 0x3F));
uint8_t failc1 = ((up == 0) && (down == 0x3F));
// print error message on failure
if (failc0 || failc1) {
//if (fails==0) uart_puts((void*) UART0_CTRL_ADDR, "DDR error in fixing up \n");
fails |= (1<<dq);
char slicelsc = '0';
char slicemsc = '0';
slicelsc += (dq % 10);
slicemsc += (dq / 10);
//uart_puts((void*) UART0_CTRL_ADDR, "S ");
//uart_puts((void*) UART0_CTRL_ADDR, &slicemsc);
//uart_puts((void*) UART0_CTRL_ADDR, &slicelsc);
//if (failc0) uart_puts((void*) UART0_CTRL_ADDR, "U");
//else uart_puts((void*) UART0_CTRL_ADDR, "D");
//uart_puts((void*) UART0_CTRL_ADDR, "\n");
}
dq++;
}
}
slicebase+=128;
}
return (0);
}
#endif
#endif
|
