summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/amd8111/amd8111_early_smbus.c
blob: 5157609639b68bc8fd4139064f47b39d0546c4fc (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
#define SMBUS_IO_BASE 0x0f00

#define SMBGSTATUS 0xe0
#define SMBGCTL    0xe2
#define SMBHSTADDR 0xe4
#define SMBHSTDAT  0xe6
#define SMBHSTCMD  0xe8
#define SMBHSTFIFO 0xe9

#define SMBUS_TIMEOUT (100*1000*10)

static void enable_smbus(void)
{
	device_t dev;
	dev = pci_locate_device(PCI_ID(0x1022, 0x746b), 0);
	if (dev == PCI_DEV_INVALID) {
		die("SMBUS controller not found\r\n");
	}
	uint8_t enable;
	print_spew("SMBus controller enabled\r\n");
	pci_write_config32(dev, 0x58, SMBUS_IO_BASE | 1);
	enable = pci_read_config8(dev, 0x41);
	pci_write_config8(dev, 0x41, enable | (1 << 7));
	/* clear any lingering errors, so the transaction will run */
	outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
}


static inline void smbus_delay(void)
{
	outb(0x80, 0x80);
}

static int smbus_wait_until_ready(void)
{
	unsigned long loops;
	loops = SMBUS_TIMEOUT;
	do {
		unsigned short val;
		smbus_delay();
		val = inw(SMBUS_IO_BASE + SMBGSTATUS);
		if ((val & 0x800) == 0) {
			break;
		}
		if(loops == (SMBUS_TIMEOUT / 2)) {
			outw(inw(SMBUS_IO_BASE + SMBGSTATUS), 
				SMBUS_IO_BASE + SMBGSTATUS);
		}
	} while(--loops);
	return loops?0:-2;
}

static int smbus_wait_until_done(void)
{
	unsigned long loops;
	loops = SMBUS_TIMEOUT;
	do {
		unsigned short val;
		smbus_delay();
		
		val = inw(SMBUS_IO_BASE + SMBGSTATUS);
		if (((val & 0x8) == 0) | ((val & 0x437) != 0)) {
			break;
		}
	} while(--loops);
	return loops?0:-3;
}

static int smbus_read_byte(unsigned device, unsigned address)
{
	unsigned char global_control_register;
	unsigned char global_status_register;
	unsigned char byte;

	if (smbus_wait_until_ready() < 0) {
		return -2;
	}
	
	/* setup transaction */
	/* disable interrupts */
	outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL);
	/* set the device I'm talking too */
	outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
	/* set the command/address... */
	outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
	/* set up for a byte data read */
	outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL);

	/* clear any lingering errors, so the transaction will run */
	/* Do I need to write the bits to a 1 to clear an error? */
	outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);

	/* clear the data word...*/
	outw(0, SMBUS_IO_BASE + SMBHSTDAT);

	/* start the command */
	outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);


	/* poll for transaction completion */
	if (smbus_wait_until_done() < 0) {
		return -3;
	}

	global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS);

	/* read results of transaction */
	byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff;

	if (global_status_register != (1 << 4)) {
		return -1;
	}
	return byte;
}

static void smbus_write_byte(unsigned device, unsigned address, unsigned char val)
{
	if (smbus_wait_until_ready() < 0) {
		return;
	}

	/* by LYH */
	outb(0x37,SMBUS_IO_BASE + SMBGSTATUS);
	/* set the device I'm talking too */
	outw(((device & 0x7f) << 1) | 0, SMBUS_IO_BASE + SMBHSTADDR);

	/* data to send */
	outb(val, SMBUS_IO_BASE + SMBHSTDAT);

	outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);

	/* start the command */
	outb(0xa, SMBUS_IO_BASE + SMBGCTL);

	/* poll for transaction completion */
	smbus_wait_until_done();
	return;
}