summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cs5535/chipsetinit.c
blob: d31efd3e52b8152e0455f35c8f13adc91a98d799 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
#include <console/console.h>
#include <arch/io.h>
#include <stdint.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <stdlib.h>
#include <string.h>
#include <bitops.h>
#include "chip.h"
#include "northbridge/amd/gx2/northbridge.h"
#include <cpu/amd/gx2def.h>
#include <cpu/x86/msr.h>
#include <cpu/x86/cache.h>
#include "southbridge/amd/cs5535/cs5535.h"
// This code uses some cs5536 includes because cs5535 includes are empty:
#include "southbridge/amd/cs5536/cs5536.h"

/* the structs in this file only set msr.lo. But ... that may not always be true */

struct msrinit {
	unsigned long msrnum;
	msr_t msr;
};

/*  Master Configuration Register for Bus Masters. */
static struct msrinit SB_MASTER_CONF_TABLE[] = {
	{ USB1_SB_GLD_MSR_CONF,	{.hi=0,.lo=0x00008f000} },	/*  NOTE: Must be 1st entry in table */
	{ USB2_SB_GLD_MSR_CONF,	{.hi=0,.lo=0x00008f000} },
	{ ATA_SB_GLD_MSR_CONF,	{.hi=0,.lo=0x00048f000} },
	{ AC97_SB_GLD_MSR_CONF,	{.hi=0,.lo=0x00008f000} },
	{ MDD_SB_GLD_MSR_CONF,	{.hi=0,.lo=0x00000f000} },
/* GLPCI_SB_GLD_MSR_CONF,	0x0FFFFFFFF*/
/* GLCP_SB_GLD_MSR_CONF,	0x0FFFFFFFF*/
/* GLIU_SB_GLD_MSR_CONF,	0x0*/
	{0,{0,0}}
};

/*  5535_A3 Clock Gating*/
static struct msrinit CS5535_CLOCK_GATING_TABLE[] = {
	{ USB1_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000005} },
	{ USB2_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000005} },
	{ GLIU_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000004} },
	{ GLPCI_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000005} },
	{ GLCP_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000004} },
	{ MDD_SB_GLD_MSR_PM,	{.hi=0, .lo=0x050554111} },
	{ ATA_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000005} },
	{ AC97_SB_GLD_MSR_PM,	{.hi=0, .lo=0x000000005} },
	{ 0,			{.hi=0, .lo=0x000000000} }
};

#ifdef UNUSED_CODE
struct acpiinit {
	unsigned short ioreg;
	unsigned long regdata;
	unsigned short iolen;
};

static struct acpiinit acpi_init_table[] = {
	{ACPI_BASE+0x00, 0x01000000, 4},
	{ACPI_BASE+0x08, 0, 4},
	{ACPI_BASE+0x0C, 0, 4},
	{ACPI_BASE+0x1C, 0, 4},
	{ACPI_BASE+0x18, 0x0FFFFFFFF, 4},
	{ACPI_BASE+0x00, 0x0000FFFF, 4},

	{PM_SCLK, 0x000000E00, 4},
	{PM_SED,  0x000004601, 4},
	{PM_SIDD, 0x000008C02, 4},
	{PM_WKD,  0x0000000A0, 4},
	{PM_WKXD, 0x0000000A0, 4},
	{0,0,0}
};

/*****************************************************************************
 *
 *	pmChipsetInit
 *
 *	Program ACPI LBAR and initialize ACPI registers.
 *
 *****************************************************************************/
static void pmChipsetInit(void)
{
	unsigned long val = 0;
	unsigned short port;

	port =  (PMLogic_BASE + 0x010);
	val =  0x0E00		; /*  1ms*/
	outl(val, port);

	/*  PM_WKXD*/
	/*  Make sure bits[3:0]=0000b to clear the*/
	/*  saved Sx state*/
	port =  (PMLogic_BASE + 0x034);
	val =  0x0A0		; /*  5ms*/
	outl(val, port);

	/*  PM_WKD*/
	port =  (PMLogic_BASE + 0x030);
	outl(val, port);

	/*  PM_SED*/
	port =  (PMLogic_BASE + 0x014);
	val =  0x04601		; /*  5ms*/
	outl(val, port);

	/*  PM_SIDD*/
	port =  (PMLogic_BASE + 0x020);
	val =  0x08C02		; /*  10ms*/
	outl(val, port);

	/* GPIO24 OUT_AUX1 function is the external signal for 5535's
	 * vsb_working_aux which is de-asserted when 5535 enters Standby (S3 or
	 * S5) state.  On Hawk, GPIO24 controls all voltage rails except Vmem
	 * and Vstandby.  This means GX2 will be fully de-powered if this
	 * control de-asserts in S3/S5.
	 */

	/* GPIO24 is setup in preChipsetInit for two reasons
	 * 1. GPIO24 at reset defaults to disabled, since this signal is
	 *    vsb_work_aux on Hawk it controls the FET's for all voltage
	 *    rails except Vstanby & Vmem.  BIOS needs to enable GPIO24 as
	 *    OUT_AUX1 & OUTPUT_EN early so it is driven by 5535.
	 * 2. Non-PM builds will require GPIO24 enabled for instant-off power
	 *    button
	 */

	/* GPIO11 OUT_AUX1 function is the external signal for 5535's
	 * slp_clk_n which is asserted when 5535 enters Sleep(S1) state.
	 * On Hawk, GPIO11 is connected to control input of external clock
	 * generator for 14MHz, PCI, USB & LPC clocks.
	 * Programming of GPIO11 will be done by VSA PM code.  During VSA
	 * Init. BIOS writes PM Core Virual Register indicating if S1 Clocks
	 * should be On or Off. This is based on a Setup item.  We do not want
	 * to leave GPIO11 enabled because of a Hawk board problem.  With
	 * GPIO11 enabled in S3, something is back-driving GPIO11 causing it
	 * to float to 1.6-1.7V.
	 */
}
#endif

struct FLASH_DEVICE {
	unsigned char fType;		/* Flash type: NOR or NAND */
	unsigned char fInterface;	/* Flash interface: I/O or Memory */
	unsigned long fMask;		/* Flash size/mask */
};

static struct FLASH_DEVICE FlashInitTable[] = {
	{ FLASH_TYPE_NAND, FLASH_IF_MEM, FLASH_MEM_4K },	/* CS0, or Flash Device 0 */
	{ FLASH_TYPE_NONE, 0, 0 },	/* CS1, or Flash Device 1 */
	{ FLASH_TYPE_NONE, 0, 0 },	/* CS2, or Flash Device 2 */
	{ FLASH_TYPE_NONE, 0, 0 },	/* CS3, or Flash Device 3 */
};

#define FlashInitTableLen (ARRAY_SIZE(FlashInitTable))

static uint32_t FlashPort[] = {
	MDD_LBAR_FLSH0,
	MDD_LBAR_FLSH1,
	MDD_LBAR_FLSH2,
	MDD_LBAR_FLSH3
};

/***************************************************************************
 *
 *	ChipsetFlashSetup
 *
 *	Flash LBARs need to be setup before VSA init so the PCI BARs have
 *	correct size info.  Call this routine only if flash needs to be
 *	configured (don't call it if you want IDE).
 *
 **************************************************************************/
static void ChipsetFlashSetup(void)
{
	msr_t msr;
	int i;
	int numEnabled = 0;

	printk(BIOS_DEBUG, "ChipsetFlashSetup++\n");
	for (i = 0; i < FlashInitTableLen; i++) {
		if (FlashInitTable[i].fType != FLASH_TYPE_NONE) {
			printk(BIOS_DEBUG, "Enable CS%d\n", i);
			/* we need to configure the memory/IO mask */
			msr = rdmsr(FlashPort[i]);
			msr.hi = 0;	/* start with the "enabled" bit clear */
			if (FlashInitTable[i].fType == FLASH_TYPE_NAND)
				msr.hi |= 0x00000002;
			else
				msr.hi &= ~0x00000002;
			if (FlashInitTable[i].fInterface == FLASH_IF_MEM)
				msr.hi |= 0x00000004;
			else
				msr.hi &= ~0x00000004;
			msr.hi |= FlashInitTable[i].fMask;
			printk(BIOS_DEBUG, "WRMSR(0x%08X, %08X_%08X)\n", FlashPort[i], msr.hi, msr.lo);
			wrmsr(FlashPort[i], msr);

			/* now write-enable the device */
			msr = rdmsr(MDD_NORF_CNTRL);
			msr.lo |= (1 << i);
			printk(BIOS_DEBUG, "WRMSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, msr.hi, msr.lo);
			wrmsr(MDD_NORF_CNTRL, msr);

			/* update the number enabled */
			numEnabled++;
		}
	}

	/* enable the flash */
	if (0 != numEnabled) {
		msr = rdmsr(MDD_PIN_OPT);
		msr.lo &= ~1; /* PIN_OPT_IDE */
		printk(BIOS_DEBUG, "WRMSR(0x%08X, %08X_%08X)\n", MDD_PIN_OPT, msr.hi, msr.lo);
		wrmsr(MDD_PIN_OPT, msr);
	}

	printk(BIOS_DEBUG, "ChipsetFlashSetup--\n");
}



/****************************************************************************
 *
 * 	ChipsetGeodeLinkInit
 *
 * 	Handle chipset specific GeodeLink settings here.
 * 	Called from GeodeLink init code.
 *
 ****************************************************************************/
static void
ChipsetGeodeLinkInit(void)
{
	msr_t msr;
	unsigned long msrnum;
	unsigned long totalmem;

	/*  SWASIF for A1 DMA */
	/*  Set all memory to  "just above systop" PCI so DMA will work */

	/*  check A1 */
	msrnum = MSR_SB_GLCP + 0x17;
	msr = rdmsr(msrnum);
	if ((msr.lo&0xff) == 0x11)
		return;

	totalmem = (sizeram() << 20) - 1; // highest address
	totalmem >>= 12;
	totalmem = ~totalmem;
	totalmem &= 0xfffff;
	msr.lo = totalmem;
	msr.hi = 0x20000000;		/*  Port 1 (PCI) */
	msrnum = MSR_SB_GLIU + 0x20;
	wrmsr(msrnum, msr);
}

void
chipsetinit(void)
{
	device_t dev;
	struct southbridge_amd_cs5535_config *sb;
	msr_t msr;
	struct msrinit *csi;
	int i;
	unsigned long msrnum;

	dev = dev_find_device(PCI_VENDOR_ID_AMD,
			PCI_DEVICE_ID_NS_CS5535_ISA, 0);

	if (!dev) {
		printk(BIOS_ERR, "CS5535 not found.\n");
		return;
	}

	sb = (struct southbridge_amd_cs5535_config *)dev->chip_info;

	if (!sb) {
		printk(BIOS_ERR, "CS5535 configuration not found.\n");
		return;
	}

	outb( P80_CHIPSET_INIT, 0x80);
	ChipsetGeodeLinkInit();

#ifdef UNUSED_CODE
	/* we hope NEVER to be in coreboot when S3 resumes
	if (! IsS3Resume()) */
	{
		struct acpiinit *aci = acpi_init_table;
		while (aci->ioreg){
			if (aci->iolen == 2) {
				outw(aci->regdata, aci->ioreg);
				inw(aci->ioreg);
			} else {
				outl(aci->regdata, aci->ioreg);
				inl(aci->ioreg);
			}
		}

		pmChipsetInit();
	}
#endif

	/*  Setup USB. Need more details. #118.18 */
	msrnum = MSR_SB_USB1 + 8;
	msr.lo =  0x00012090;
	msr.hi = 0;
	wrmsr(msrnum, msr);
	msrnum = MSR_SB_USB2 + 8;
	wrmsr(msrnum, msr);

	/* set hd IRQ */
	outl	(GPIOL_2_SET, GPIOL_INPUT_ENABLE);
	outl	(GPIOL_2_SET, GPIOL_IN_AUX1_SELECT);

	/*  Allow IO read and writes during a ATA DMA operation. */
	/*   This could be done in the HD rom but do it here for easier debugging. */

	msrnum = ATA_SB_GLD_MSR_ERR;
	msr = rdmsr(msrnum);
	msr.lo &= ~0x100;
	wrmsr(msrnum, msr);

	/*  Enable Post Primary IDE. */
	msrnum = GLPCI_SB_CTRL;
	msr = rdmsr(msrnum);
	msr.lo |=  GLPCI_CRTL_PPIDE_SET;
	wrmsr(msrnum, msr);

	/*  Set up Master Configuration Register */
	/*  If 5536, use same master config settings as 5535, except for OHCI MSRs */
	i = 0;

	csi = &SB_MASTER_CONF_TABLE[i];
	for(; csi->msrnum; csi++){
		msr.lo = csi->msr.lo;
		msr.hi = csi->msr.hi;
		wrmsr(csi->msrnum, msr); // MSR - see table above
	}

	/*  Flash Setup */
	printk(BIOS_INFO, "%sDOING ChipsetFlashSetup()!\n",
			sb->setupflash ? "" : "NOT ");

	if (sb->setupflash)
		ChipsetFlashSetup();

	/*  Set up Hardware Clock Gating */

	/* if (getnvram(TOKEN_SB_CLK_GATE) != TVALUE_DISABLE) */
	{
		csi = CS5535_CLOCK_GATING_TABLE;

		for(; csi->msrnum; csi++){
			msr.lo = csi->msr.lo;
			msr.hi = csi->msr.hi;
			wrmsr(csi->msrnum, msr);	// MSR - see table above
		}
	}
}