summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cs5535/early_setup.c
blob: 935153f513eb1e9eceb042e39d2e1100b9f877e3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
/*
 *
 * cs5535_early_setup.c:	Early chipset initialization for CS5535 companion device
 *
 *
 * This file implements the initialization sequence documented in section 4.2 of
 * AMD Geode GX Processor CS5535 Companion Device GoedeROM Porting Guide.
 *
 */

/**
 * @brief Setup PCI IDSEL for CS5535
 *
 *
 */

static void cs5535_setup_extmsr(void)
{
	msr_t msr;

	/* forward MSR access to CS5535_GLINK_PORT_NUM to CS5535_DEV_NUM */
	msr.hi = msr.lo = 0x00000000;
#if CS5535_GLINK_PORT_NUM <= 4
	msr.lo = CS5535_DEV_NUM << ((CS5535_GLINK_PORT_NUM - 1) * 8);
#else
	msr.hi = CS5535_DEV_NUM << ((CS5535_GLINK_PORT_NUM - 5) * 8);
#endif
	wrmsr(0x5000201e, msr);
}

static void cs5535_setup_idsel(void)
{
	/* write IDSEL to the write once register at address 0x0000 */
	outl(0x1 << (CS5535_DEV_NUM + 10), 0);
}

static void cs5535_usb_swapsif (void)
{
	msr_t msr;

	msr = rdmsr(0x51600005);
	//USB Serial short detect bit.
	if (msr.hi & 0x10) {
		/* We need to preserve bits 32,33,35 and not clear any BIST error, but clear the
		 * SERSHRT error bit */
		msr.hi &= 0xFFFFFFFB;
		wrmsr(0x51600005, msr);
	}
}

static void cs5535_setup_iobase(void)
{
	msr_t msr;
	/* setup LBAR for SMBus controller */
	msr.hi = 0x0000f001;
	msr.lo = SMBUS_IO_BASE;
	wrmsr(MDD_LBAR_SMB, msr);

	/* setup LBAR for GPIO */
	msr.hi = 0x0000f001;
	msr.lo = GPIO_IO_BASE;
	wrmsr(MDD_LBAR_GPIO, msr);

	/* setup LBAR for MFGPT */
	msr.hi = 0x0000f001;
	msr.lo = MFGPT_IO_BASE;
	wrmsr(MDD_LBAR_MFGPT, msr);

	/* setup LBAR for ACPI */
	msr.hi = 0x0000f001;
	msr.lo = ACPI_IO_BASE;
	wrmsr(MDD_LBAR_ACPI, msr);

	/* setup LBAR for PM Support */
	msr.hi = 0x0000f001;
	msr.lo = PMS_IO_BASE;
	wrmsr(MDD_LBAR_PMS, msr);
}

static void cs5535_setup_gpio(void)
{
	uint32_t val;

	/* setup GPIO pins 14/15 for SDA/SCL */
	val = (1<<14 | 1<<15);
	/* Output Enable */
	outl(0x3fffc000, 0x6100 + 0x04);
	//outl(val, 0x6100 + 0x04);
	/* Output AUX1 */
	outl(0x3fffc000, 0x6100 + 0x10);
	//outl(val, 0x6100 + 0x10);
	/* Input Enable */
	//outl(0x0f5af0a5, 0x6100 + 0x20);
	outl(0x3fffc000, 0x6100 + 0x20);
	//outl(val, 0x6100 + 0x20);
	/* Input AUX1 */
	//outl(0x3ffbc004, 0x6100 + 0x34);
	outl(0x3fffc000, 0x6100 + 0x34);
	//outl(val, 0x6100 + 0x34);
}

void cs5535_disable_internal_uart(void)
{
}

static void cs5535_setup_cis_mode(void)
{
	msr_t msr;

	/* Setup CPU serial SouthBridge interface to mode C. */
	msr = rdmsr(GLPCI_SB_CTRL);
	msr.lo &= ~0x18;
	msr.lo |= 0x10;
	wrmsr(GLPCI_SB_CTRL, msr);
}

static void dummy(void)
{
}

static void cs5535_early_setup(void)
{
	msr_t msr;

	cs5535_setup_extmsr();

	msr = rdmsr(GLCP_SYS_RSTPLL);
	if (msr.lo & (0x3f << 26)) {
		/* PLL is already set and we are reboot from PLL reset */
		printk(BIOS_DEBUG, "reboot from BIOS reset\n");
		return;
	}
	printk(BIOS_DEBUG, "Setup idsel\n");
	cs5535_setup_idsel();
	printk(BIOS_DEBUG, "Setup iobase\n");
	cs5535_usb_swapsif ();
	cs5535_setup_iobase();
	printk(BIOS_DEBUG, "Setup gpio\n");
	cs5535_setup_gpio();
	printk(BIOS_DEBUG, "Setup cis_mode\n");
	cs5535_setup_cis_mode();
	printk(BIOS_DEBUG, "Setup smbus\n");
	cs5535_enable_smbus();
	dummy();
}