summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cs5536/cs5536.c
blob: 002335d6b2482a76b85ac2e39dc828bff87e6e8d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <arch/io.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <console/console.h>
#include <stdint.h>
#include <pc80/isa-dma.h>
#include <pc80/mc146818rtc.h>
#include <pc80/i8259.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/vr.h>
#include <cpu/amd/geode_post_code.h>
#include <stdlib.h>
#include "chip.h"
#include "cs5536.h"

struct msrinit {
	uint32_t msrnum;
	msr_t msr;
};

/*	Master Configuration Register for Bus Masters.*/
struct msrinit SB_MASTER_CONF_TABLE[] = {
	{USB2_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00008f000}},
	{ATA_SB_GLD_MSR_CONF,  {.hi = 0,.lo = 0x00048f000}},
	{AC97_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00008f000}},
	{MDD_SB_GLD_MSR_CONF,  {.hi = 0,.lo = 0x00000f000}},
	{0, {0, 0}}
};

/*	5536 Clock Gating*/
struct msrinit CS5536_CLOCK_GATING_TABLE[] = {
	/* MSR		  Setting*/
	{GLIU_SB_GLD_MSR_PM,  {.hi = 0,.lo = 0x000000004}},
	{GLPCI_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000005}},
	{GLCP_SB_GLD_MSR_PM,  {.hi = 0,.lo = 0x000000004}},
	{MDD_SB_GLD_MSR_PM,   {.hi = 0,.lo = 0x050554111}},	/*  SMBus clock gating errata (PBZ 2226 & SiBZ 3977) */
	{ATA_SB_GLD_MSR_PM,   {.hi = 0,.lo = 0x000000005}},
	{AC97_SB_GLD_MSR_PM,  {.hi = 0,.lo = 0x000000005}},
	{0, {0, 0}}
};

struct acpiinit {
	uint16_t ioreg;
	uint32_t regdata;
};

struct acpiinit acpi_init_table[] = {
	{ACPI_IO_BASE + 0x00, 0x01000000},
	{ACPI_IO_BASE + 0x08, 0},
	{ACPI_IO_BASE + 0x0C, 0},
	{ACPI_IO_BASE + 0x1C, 0},
	{ACPI_IO_BASE + 0x18, 0x0FFFFFFFF},
	{ACPI_IO_BASE + 0x00, 0x0000FFFF},
	{PMS_IO_BASE + PM_SCLK, 0x000000E00},
	{PMS_IO_BASE + PM_SED, 0x000004601},
	{PMS_IO_BASE + PM_SIDD, 0x000008C02},
	{PMS_IO_BASE + PM_WKD, 0x0000000A0},
	{PMS_IO_BASE + PM_WKXD, 0x0000000A0},
	{0, 0, 0}
};

struct FLASH_DEVICE {
	unsigned char fType;	/* Flash type: NOR or NAND */
	unsigned char fInterface;	/* Flash interface: I/O or Memory */
	unsigned long fMask;	/* Flash size/mask */
};

struct FLASH_DEVICE FlashInitTable[] = {
	{FLASH_TYPE_NAND, FLASH_IF_MEM, FLASH_MEM_4K},	/* CS0, or Flash Device 0 */
	{FLASH_TYPE_NONE, 0, 0},	/* CS1, or Flash Device 1 */
	{FLASH_TYPE_NONE, 0, 0},	/* CS2, or Flash Device 2 */
	{FLASH_TYPE_NONE, 0, 0},	/* CS3, or Flash Device 3 */
};

#define FlashInitTableLen (ARRAY_SIZE(FlashInitTable))

uint32_t FlashPort[] = {
	MDD_LBAR_FLSH0,
	MDD_LBAR_FLSH1,
	MDD_LBAR_FLSH2,
	MDD_LBAR_FLSH3
};

/* ***************************************************************************/
/* **/
/* *	pmChipsetInit*/
/* **/
/* *	Program ACPI LBAR and initialize ACPI registers.*/
/* **/
/* ***************************************************************************/
static void pmChipsetInit(void)
{
	uint32_t val = 0;
	uint16_t port;

	port = (PMS_IO_BASE + 0x010);
	val = 0x0E00;		/*  1ms */
	outl(val, port);

	/*      PM_WKXD */
	/*      Make sure bits[3:0]=0000b to clear the */
	/*      saved Sx state */
	port = (PMS_IO_BASE + 0x034);
	val = 0x0A0;		/*  5ms */
	outl(val, port);

	/*      PM_WKD */
	port = (PMS_IO_BASE + 0x030);
	outl(val, port);

	/*      PM_SED */
	port = (PMS_IO_BASE + 0x014);
	val = 0x04601;		/*  5ms, # of 3.57954MHz clock edges */
	outl(val, port);

	/*      PM_SIDD */
	port = (PMS_IO_BASE + 0x020);
	val = 0x08C02;		/*  10ms, # of 3.57954MHz clock edges */
	outl(val, port);
}

/***************************************************************************
 *
 *	ChipsetFlashSetup
 *
 *	Flash LBARs need to be setup before VSA init so the PCI BARs have
 *	correct size info.	Call this routine only if flash needs to be
 *	configured (don't call it if you want IDE).
 *
 **************************************************************************/
static void ChipsetFlashSetup(void)
{
	msr_t msr;
	int i;
	int numEnabled = 0;

	printk_debug("ChipsetFlashSetup: Start\n");
	for (i = 0; i < FlashInitTableLen; i++) {
		if (FlashInitTable[i].fType != FLASH_TYPE_NONE) {
			printk_debug("Enable CS%d\n", i);
			/* we need to configure the memory/IO mask */
			msr = rdmsr(FlashPort[i]);
			msr.hi = 0;	/* start with the "enabled" bit clear */
			if (FlashInitTable[i].fType == FLASH_TYPE_NAND)
				msr.hi |= 0x00000002;
			else
				msr.hi &= ~0x00000002;
			if (FlashInitTable[i].fInterface == FLASH_IF_MEM)
				msr.hi |= 0x00000004;
			else
				msr.hi &= ~0x00000004;
			msr.hi |= FlashInitTable[i].fMask;
			printk_debug("MSR(0x%08X, %08X_%08X)\n", FlashPort[i],
				     msr.hi, msr.lo);
			wrmsr(FlashPort[i], msr);

			/* now write-enable the device */
			msr = rdmsr(MDD_NORF_CNTRL);
			msr.lo |= (1 << i);
			printk_debug("MSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL,
				     msr.hi, msr.lo);
			wrmsr(MDD_NORF_CNTRL, msr);

			/* update the number enabled */
			numEnabled++;
		}
	}

	printk_debug("ChipsetFlashSetup: Finish\n");

}

/* ***************************************************************************/
/* **/
/* *	enable_ide_nand_flash_header */
/*		Run after VSA init to enable the flash PCI device header */
/* **/
/* ***************************************************************************/
static void enable_ide_nand_flash_header()
{
	/* Tell VSA to use FLASH PCI header. Not IDE header. */
	outl(0x80007A40, 0xCF8);
	outl(0xDEADBEEF, 0xCFC);
}

#define RTC_CENTURY 0x32
#define RTC_DOMA	0x3D
#define RTC_MONA	0x3E

static void lpc_init(struct southbridge_amd_cs5536_config *sb)
{
	msr_t msr;

	if (sb->lpc_serirq_enable) {
		msr.lo = sb->lpc_serirq_enable;
		msr.hi = 0;
		wrmsr(MDD_IRQM_LPC, msr);
		if (sb->lpc_serirq_polarity) {
			msr.lo = sb->lpc_serirq_polarity << 16;
			msr.lo |= (sb->lpc_serirq_mode << 6) | (1 << 7);	/* enable */
			msr.hi = 0;
			wrmsr(MDD_LPC_SIRQ, msr);
		}
	}

	/* Allow DMA from LPC */
	msr = rdmsr(MDD_DMA_MAP);
	msr.lo = 0x7777;
	wrmsr(MDD_DMA_MAP, msr);

	/* enable the RTC/CMOS century byte at address 32h */
	msr = rdmsr(MDD_RTC_CENTURY_OFFSET);
	msr.lo = RTC_CENTURY;
	wrmsr(MDD_RTC_CENTURY_OFFSET, msr);

	/* enable the RTC/CMOS day of month and month alarms */
	msr = rdmsr(MDD_RTC_DOMA_IND);
	msr.lo = RTC_DOMA;
	wrmsr(MDD_RTC_DOMA_IND, msr);

	msr = rdmsr(MDD_RTC_MONA_IND);
	msr.lo = RTC_MONA;
	wrmsr(MDD_RTC_MONA_IND, msr);

	rtc_init(0);

	isa_dma_init();
}

static void uarts_init(struct southbridge_amd_cs5536_config *sb)
{
	msr_t msr;
	uint16_t addr;
	uint32_t gpio_addr;
	device_t dev;

	dev = dev_find_device(PCI_VENDOR_ID_AMD, 
			PCI_DEVICE_ID_AMD_CS5536_ISA, 0);
	gpio_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1);
	gpio_addr &= ~1;	/* clear IO bit */
	printk_debug("GPIO_ADDR: %08X\n", gpio_addr);

	/* This could be extended to support IR modes */

	/* COM1 */
	if (sb->com1_enable) {
		/* Set the address */
		switch (sb->com1_address) {
		case 0x3F8:
			addr = 7;
			break;

		case 0x3E8:
			addr = 6;
			break;

		case 0x2F8:
			addr = 5;
			break;

		case 0x2E8:
			addr = 4;
			break;
		}
		msr = rdmsr(MDD_LEG_IO);
		msr.lo |= addr << 16;
		wrmsr(MDD_LEG_IO, msr);

		/* Set the IRQ */
		msr = rdmsr(MDD_IRQM_YHIGH);
		msr.lo |= sb->com1_irq << 24;
		wrmsr(MDD_IRQM_YHIGH, msr);

		/* GPIO8 - UART1_TX */
		/* Set: Output Enable  (0x4) */
		outl(GPIOL_8_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
		/* Set: OUTAUX1 Select (0x10) */
		outl(GPIOL_8_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);

		/* GPIO8 - UART1_RX */
		/* Set: Input Enable   (0x20) */
		outl(GPIOL_9_SET, gpio_addr + GPIOL_INPUT_ENABLE);
		/* Set: INAUX1 Select  (0x34) */
		outl(GPIOL_9_SET, gpio_addr + GPIOL_IN_AUX1_SELECT);

		/* Set: GPIO 8 + 9 Pull Up         (0x18) */
		outl(GPIOL_8_SET | GPIOL_9_SET,
		     gpio_addr + GPIOL_PULLUP_ENABLE);

		/* enable COM1 */
		/* Bit 1 = device enable Bit 4 = allow access to the upper banks */
		msr.lo = (1 << 4) | (1 << 1);
		msr.hi = 0;
		wrmsr(MDD_UART1_CONF, msr);

	} else {
		/* Reset and disable COM1 */
		msr = rdmsr(MDD_UART1_CONF);
		msr.lo = 1;	// reset
		wrmsr(MDD_UART1_CONF, msr);
		msr.lo = 0;	// disabled
		wrmsr(MDD_UART1_CONF, msr);

		/* Disable the IRQ */
		msr = rdmsr(MDD_LEG_IO);
		msr.lo &= ~(0xF << 16);
		wrmsr(MDD_LEG_IO, msr);
	}

	/* COM2 */
	if (sb->com2_enable) {
		switch (sb->com2_address) {
		case 0x3F8:
			addr = 7;
			break;

		case 0x3E8:
			addr = 6;
			break;

		case 0x2F8:
			addr = 5;
			break;

		case 0x2E8:
			addr = 4;
			break;
		}
		msr = rdmsr(MDD_LEG_IO);
		msr.lo |= addr << 20;
		wrmsr(MDD_LEG_IO, msr);

		/* Set the IRQ */
		msr = rdmsr(MDD_IRQM_YHIGH);
		msr.lo |= sb->com2_irq << 28;
		wrmsr(MDD_IRQM_YHIGH, msr);

		/* GPIO4 - UART2_RX */
		/* Set: Output Enable (0x4) */
		outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
		/* Set: OUTAUX1 Select (0x10) */
		outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);

		/* GPIO3 - UART2_TX */
		/* Set: Input Enable (0x20) */
		outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE);
		/* Set: INAUX1 Select (0x34) */
		outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT);

		/* Set: GPIO 3 and 4 Pull Up (0x18) */
		outl(GPIOL_3_SET | GPIOL_4_SET,
		     gpio_addr + GPIOL_PULLUP_ENABLE);

		/* enable COM2 */
		/* Bit 1 = device enable Bit 4 = allow access to the upper banks */
		msr.lo = (1 << 4) | (1 << 1);
		msr.hi = 0;
		wrmsr(MDD_UART2_CONF, msr);

	} else {
		/* Reset and disable COM2 */
		msr = rdmsr(MDD_UART2_CONF);
		msr.lo = 1;	// reset
		wrmsr(MDD_UART2_CONF, msr);
		msr.lo = 0;	// disabled
		wrmsr(MDD_UART2_CONF, msr);

		/* Disable the IRQ */
		msr = rdmsr(MDD_LEG_IO);
		msr.lo &= ~(0xF << 20);
		wrmsr(MDD_LEG_IO, msr);
	}
}

#define HCCPARAMS		0x08
#define IPREG04			0xA0
	#define USB_HCCPW_SET	(1 << 1)
#define UOCCAP			0x00
	#define APU_SET			(1 << 15)
#define UOCMUX			0x04
#define PMUX_HOST		0x02
#define PMUX_DEVICE		0x03
	#define PUEN_SET		(1 << 2)
#define UDCDEVCTL		0x404
	#define UDC_SD_SET		(1 << 10)
#define UOCCTL			0x0C
	#define PADEN_SET		(1 << 7)

static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
{
	uint8_t *bar;
	msr_t msr;
	device_t dev;

	dev = dev_find_device(PCI_VENDOR_ID_AMD, 
			PCI_DEVICE_ID_AMD_CS5536_EHCI, 0);
	if (dev) {

		/* Serial Short Detect Enable */
		msr = rdmsr(USB2_SB_GLD_MSR_CONF);
		msr.hi |= USB2_UPPER_SSDEN_SET;
		wrmsr(USB2_SB_GLD_MSR_CONF, msr);

		/* write to clear diag register */
		wrmsr(USB2_SB_GLD_MSR_DIAG, rdmsr(USB2_SB_GLD_MSR_DIAG));

		bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);

		/* Make HCCPARAMS writeable */
		writel(readl(bar + IPREG04) | USB_HCCPW_SET, bar + IPREG04);

		/* ; EECP=50h, IST=01h, ASPC=1 */
		writel(0x00005012, bar + HCCPARAMS);
	}

	dev = dev_find_device(PCI_VENDOR_ID_AMD, 
			PCI_DEVICE_ID_AMD_CS5536_OTG, 0);
	if (dev) {
		bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);

		writel(readl(bar + UOCMUX) & PUEN_SET, bar + UOCMUX);

		/* Host or Device? */
		if (sb->enable_USBP4_device) {
			writel(readl(bar + UOCMUX) | PMUX_DEVICE, bar + UOCMUX);
		} else {
			writel(readl(bar + UOCMUX) | PMUX_HOST, bar + UOCMUX);
		}

		/* Overcurrent configuration */
		if (sb->enable_USBP4_overcurrent) {
			writel(readl(bar + UOCCAP)
			       | sb->enable_USBP4_overcurrent, bar + UOCCAP);
		}
	}

	/* PBz#6466: If the UOC(OTG) device, port 4, is configured as a device,
	 *      then perform the following sequence:
	 *
	 * - set SD bit in DEVCTRL udc register
	 * - set PADEN (former OTGPADEN) bit in uoc register
	 * - set APU bit in uoc register */
	if (sb->enable_USBP4_device) {
		dev = dev_find_device(PCI_VENDOR_ID_AMD, 
				PCI_DEVICE_ID_AMD_CS5536_UDC, 0);
		if (dev) {
			bar = (uint8_t *) pci_read_config32(dev, 
					PCI_BASE_ADDRESS_0);
			writel(readl(bar + UDCDEVCTL) | UDC_SD_SET,
			       bar + UDCDEVCTL);

		}

		dev = dev_find_device(PCI_VENDOR_ID_AMD,
				PCI_DEVICE_ID_AMD_CS5536_OTG, 0);
		if (dev) {
			bar = (uint8_t *) pci_read_config32(dev,
					PCI_BASE_ADDRESS_0);
			writel(readl(bar + UOCCTL) | PADEN_SET, bar + UOCCTL);
			writel(readl(bar + UOCCAP) | APU_SET, bar + UOCCAP);
		}
	}

	/* Disable virtual PCI UDC and OTG headers */
	dev = dev_find_device(PCI_VENDOR_ID_AMD, 
			PCI_DEVICE_ID_AMD_CS5536_UDC, 0);
	if (dev) {
		pci_write_config32(dev, 0x7C, 0xDEADBEEF);
	}

	dev = dev_find_device(PCI_VENDOR_ID_AMD, 
			PCI_DEVICE_ID_AMD_CS5536_OTG, 0);
	if (dev) {
		pci_write_config32(dev, 0x7C, 0xDEADBEEF);
	}
}

/* ***************************************************************************/
/* **/
/* *	ChipsetInit */
/*			Called from northbridge init (Pre-VSA). */
/* **/
/* ***************************************************************************/
void chipsetinit(void)
{
	device_t dev;
	msr_t msr;
	uint32_t msrnum;
	struct southbridge_amd_cs5536_config *sb =
	    (struct southbridge_amd_cs5536_config *)dev->chip_info;
	struct msrinit *csi;

	post_code(P80_CHIPSET_INIT);

	/* we hope NEVER to be in coreboot when S3 resumes
	   if (! IsS3Resume()) */
	{
		struct acpiinit *aci = acpi_init_table;
		for (; aci->ioreg; aci++) {
			outl(aci->regdata, aci->ioreg);
			inl(aci->ioreg);
		}

		pmChipsetInit();
	}

	/* set hd IRQ */
	outl(GPIOL_2_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
	outl(GPIOL_2_SET, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT);

	/*      Allow IO read and writes during a ATA DMA operation. */
	/*       This could be done in the HD rom but do it here for easier debugging. */
	msrnum = ATA_SB_GLD_MSR_ERR;
	msr = rdmsr(msrnum);
	msr.lo &= ~0x100;
	wrmsr(msrnum, msr);

	/*      Enable Post Primary IDE. */
	msrnum = GLPCI_SB_CTRL;
	msr = rdmsr(msrnum);
	msr.lo |= GLPCI_CRTL_PPIDE_SET;
	wrmsr(msrnum, msr);

	csi = SB_MASTER_CONF_TABLE;
	for (; csi->msrnum; csi++) {
		msr.lo = csi->msr.lo;
		msr.hi = csi->msr.hi;
		wrmsr(csi->msrnum, msr);	// MSR - see table above
	}

	/*      Flash BAR size Setup */
	printk_err("%sDoing ChipsetFlashSetup()\n",
		   sb->enable_ide_nand_flash == 1 ? "" : "Not ");
	if (sb->enable_ide_nand_flash == 1)
		ChipsetFlashSetup();

	/* */
	/*      Set up Hardware Clock Gating */
	/* */
	{
		csi = CS5536_CLOCK_GATING_TABLE;
		for (; csi->msrnum; csi++) {
			msr.lo = csi->msr.lo;
			msr.hi = csi->msr.hi;
			wrmsr(csi->msrnum, msr);	// MSR - see table above
		}
	}
}

static void southbridge_init(struct device *dev)
{
	struct southbridge_amd_cs5536_config *sb =
	    (struct southbridge_amd_cs5536_config *)dev->chip_info;
	int i;
	/*
	 * struct device *gpiodev;
	 * unsigned short gpiobase = MDD_GPIO;
	 */

	printk_err("cs5536: %s\n", __func__);
	setup_i8259();
	lpc_init(sb);
	uarts_init(sb);

	if (sb->enable_gpio_int_route) {
		vrWrite((VRC_MISCELLANEOUS << 8) + PCI_INT_AB,
			(sb->enable_gpio_int_route & 0xFFFF));
		vrWrite((VRC_MISCELLANEOUS << 8) + PCI_INT_CD,
			(sb->enable_gpio_int_route >> 16));
	}

	printk_err("cs5536: %s: enable_ide_nand_flash is %d\n", __func__,
		   sb->enable_ide_nand_flash);
	if (sb->enable_ide_nand_flash == 1) {
		enable_ide_nand_flash_header();
	}

	enable_USB_port4(sb);

	/* disable unwanted virtual PCI devices */
	for (i = 0; (i < MAX_UNWANTED_VPCI) && (0 != sb->unwanted_vpci[i]); i++) {
		printk_debug("Disabling VPCI device: 0x%08X\n",
			     sb->unwanted_vpci[i]);
		outl(sb->unwanted_vpci[i] + 0x7C, 0xCF8);
		outl(0xDEADBEEF, 0xCFC);
	}
}

static void cs5536_read_resources(device_t dev)
{
	struct resource *res;

	pci_dev_read_resources(dev);

	res = new_resource(dev, 1);
	res->base = 0x0UL;
	res->size = 0x400UL;
	res->limit = 0xffffUL;
	res->flags = IORESOURCE_IO |
		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;

	res = new_resource(dev, 3); /* IOAPIC */
	res->base = 0xfec00000;
	res->size = 0x00001000;
	res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}

static void southbridge_enable(struct device *dev)
{
	printk_err("cs5536: %s: dev is %p\n", __func__, dev);

}

static void cs5536_pci_dev_enable_resources(device_t dev)
{
	printk_err("cs5536: %s()\n", __func__);
	pci_dev_enable_resources(dev);
	enable_childrens_resources(dev);
}

static struct device_operations southbridge_ops = {
	.read_resources = cs5536_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = cs5536_pci_dev_enable_resources,
	.init = southbridge_init,
//      .enable                   = southbridge_enable,
	.scan_bus = scan_static_bus,
};

static const struct pci_driver cs5536_pci_driver __pci_driver = {
	.ops = &southbridge_ops,
	.vendor = PCI_VENDOR_ID_AMD,
	.device = PCI_DEVICE_ID_AMD_CS5536_ISA
};

struct chip_operations southbridge_amd_cs5536_ops = {
	CHIP_NAME("AMD Geode CS5536 Southbridge")
	    /* This is only called when this device is listed in the
	     * static device tree.
	     */
	    .enable_dev = southbridge_enable,
};