summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/rs780/early_setup.c
blob: fd64eb4bb0a1334d40625cb5e3ff502d80781f37 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2010 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <types.h>
#include <arch/io.h>
#include <northbridge/amd/amdmct/mct/mct_d.h>
#include <console/console.h>
#include <cpu/x86/msr.h>

#include "rev.h"
#include "rs780.h"

#define NBHTIU_INDEX		0x94 /* Note: It is different with RS690, whose HTIU index is 0xA8 */
#define NBMISC_INDEX		0x60
#define NBMC_INDEX 		0xE8

static u32 nb_read_index(pci_devfn_t dev, u32 index_reg, u32 index)
{
	pci_write_config32(dev, index_reg, index);
	return pci_read_config32(dev, index_reg + 0x4);
}

static void nb_write_index(pci_devfn_t dev, u32 index_reg, u32 index, u32 data)
{
	pci_write_config32(dev, index_reg, index /* | 0x80 */ );
	pci_write_config32(dev, index_reg + 0x4, data);
}

u32 nbmisc_read_index(pci_devfn_t nb_dev, u32 index)
{
	return nb_read_index((nb_dev), NBMISC_INDEX, (index));
}

void nbmisc_write_index(pci_devfn_t nb_dev, u32 index, u32 data)
{
	nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data));
}

u32 htiu_read_index(pci_devfn_t nb_dev, u32 index)
{
	return nb_read_index((nb_dev), NBHTIU_INDEX, (index));
}

void htiu_write_index(pci_devfn_t nb_dev, u32 index, u32 data)
{
	nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data));
}

u32 nbmc_read_index(pci_devfn_t nb_dev, u32 index)
{
	return nb_read_index((nb_dev), NBMC_INDEX, (index));
}

void nbmc_write_index(pci_devfn_t nb_dev, u32 index, u32 data)
{
	nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data));
}

void set_htiu_enable_bits(pci_devfn_t nb_dev, u32 reg_pos, u32 mask,
				 u32 val)
{
	u32 reg_old, reg;
	reg = reg_old = htiu_read_index(nb_dev, reg_pos);
	reg &= ~mask;
	reg |= val;
	if (reg != reg_old) {
		htiu_write_index(nb_dev, reg_pos, reg);
	}
}

void set_nbmisc_enable_bits(pci_devfn_t nb_dev, u32 reg_pos, u32 mask,
				   u32 val)
{
	u32 reg_old, reg;
	reg = reg_old = nbmisc_read_index(nb_dev, reg_pos);
	reg &= ~mask;
	reg |= val;
	if (reg != reg_old) {
		nbmisc_write_index(nb_dev, reg_pos, reg);
	}
}

void set_nbcfg_enable_bits(pci_devfn_t nb_dev, u32 reg_pos, u32 mask,
				  u32 val)
{
	u32 reg_old, reg;
	reg = reg_old = pci_read_config32(nb_dev, reg_pos);
	reg &= ~mask;
	reg |= val;
	if (reg != reg_old) {
		pci_write_config32(nb_dev, reg_pos, reg);
	}
}
/* family 10 only, for reg > 0xFF */
#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
static void set_fam10_ext_cfg_enable_bits(pci_devfn_t fam10_dev, u32 reg_pos,
		u32 mask, u32 val)
{
	u32 reg_old, reg;
	reg = reg_old = Get_NB32(fam10_dev, reg_pos);
	reg &= ~mask;
	reg |= val;
	if (reg != reg_old) {
		Set_NB32(fam10_dev, reg_pos, reg);
	}
}
#else
#define set_fam10_ext_cfg_enable_bits(a, b, c, d) do {} while (0)
#endif


void set_nbcfg_enable_bits_8(pci_devfn_t nb_dev, u32 reg_pos, u8 mask,
				    u8 val)
{
	u8 reg_old, reg;
	reg = reg_old = pci_read_config8(nb_dev, reg_pos);
	reg &= ~mask;
	reg |= val;
	if (reg != reg_old) {
		pci_write_config8(nb_dev, reg_pos, reg);
	}
}

void set_nbmc_enable_bits(pci_devfn_t nb_dev, u32 reg_pos, u32 mask,
				 u32 val)
{
	u32 reg_old, reg;
	reg = reg_old = nbmc_read_index(nb_dev, reg_pos);
	reg &= ~mask;
	reg |= val;
	if (reg != reg_old) {
		nbmc_write_index(nb_dev, reg_pos, reg);
	}
}

static u8 is_famly10(void)
{
	return (cpuid_eax(1) & 0xff00000) != 0;
}

#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
static u8 l3_cache(void)
{
	return (cpuid_edx(0x80000006) & (0x3FFF << 18)) != 0;
}

static u8 cpu_core_number(void)
{
	return (cpuid_ecx(0x80000008) & 0xFF) + 1;
}
#endif

/*****************************************
 * Init HT link speed/width for rs780 -- k8 link
 * 1: Check CPU Family, Family10?
 * 2: Get CPU's HT speed and width
 * 3: Decide HT mode 1 or 3 by HT Speed. >1GHz: HT3, else HT1
 *****************************************/
static const u8 rs780_ibias[] = {
	/* 1, 3 are reserved. */
	[0x0] = 0x4C,		/* 200MHz HyperTransport 1 only */
	[0x2] = 0x4C,		/* 400MHz HyperTransport 1 only */
	[0x4] = 0xB6,		/* 600MHz HyperTransport 1 only */
	[0x5] = 0x4C,		/* 800MHz HyperTransport 1 only */
	[0x6] = 0x9D,		/* 1GHz   HyperTransport 1 only */
	/* HT3 for Family 10 */
	[0x7] = 0xB6,		/* 1.2GHz HyperTransport 3 only */
	[0x8] = 0x2B,		/* 1.4GHz HyperTransport 3 only */
	[0x9] = 0x4C,		/* 1.6GHz HyperTransport 3 only */
	[0xa] = 0x6C,		/* 1.8GHz HyperTransport 3 only */
	[0xb] = 0x9D,		/* 2.0GHz HyperTransport 3 only */
	[0xc] = 0xAD,		/* 2.2GHz HyperTransport 3 only */
	[0xd] = 0xB6,		/* 2.4GHz HyperTransport 3 only */
	[0xe] = 0xC6,		/* 2.6GHz HyperTransport 3 only */
};

void rs780_htinit(void)
{
	/*
	 * About HT, it has been done in enumerate_ht_chain().
	 */
	pci_devfn_t cpu_f0, rs780_f0, clk_f1;
	u32 reg;
	u8 cpu_ht_freq, ibias;

	cpu_f0 = PCI_DEV(0, 0x18, 0);
	/************************
	* get cpu's ht freq, in cpu's function 0, offset 0x88
	* bit11-8, specifics the maximum operation frequency of the link's transmitter clock.
	* The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero
	* value to this reg, and that value takes effect on the next warm reset or
	* LDTSTOP_L disconnect sequence.
	* please see the table rs780_ibias about the value and its corresponding frequency.
	************************/
	reg = pci_read_config32(cpu_f0, 0x88);
	cpu_ht_freq = (reg & 0xf00) >> 8;
	printk(BIOS_INFO, "rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq);
	rs780_f0 = PCI_DEV(0, 0, 0);
	//set_nbcfg_enable_bits(rs780_f0, 0xC8, 0x7<<24 | 0x7<<28, 1<<24 | 1<<28);

	clk_f1 = PCI_DEV(0, 0, 1); /* We need to make sure the F1 is accessible. */

	ibias = rs780_ibias[cpu_ht_freq];

	/* If HT freq>1GHz, we assume the CPU is fam10, else it is K8.
	 * Is it appropriate?
	 * Frequency is 1GHz, i.e. cpu_ht_freq is 6, in most cases.
	 * So we check 6 only, it would be faster. */
	if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) ||
		(cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) {
		printk(BIOS_INFO, "rs780_htinit: HT1 mode\n");

		/* HT1 mode, RPR 8.4.2 */
		/* set IBIAS code */
		set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias);
		/* Optimizes chipset HT transmitter drive strength */
		set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1);
	} else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) {
		printk(BIOS_INFO, "rs780_htinit: HT3 mode\n");

		#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
		/* HT3 mode, RPR 8.4.3 */
		set_nbcfg_enable_bits(rs780_f0, 0x9c, 0x3 << 16, 0);

		/* set IBIAS code */
		set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias);
		/* Optimizes chipset HT transmitter drive strength */
		set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1);
		/* Enables error-retry mode */
		set_nbcfg_enable_bits(rs780_f0, 0x44, 0x1, 0x1);
		/* Enables scrambling and Disables command throttling */
		set_nbcfg_enable_bits(rs780_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14));
		/* Enables transmitter de-emphasis */
		set_nbcfg_enable_bits(rs780_f0, 0xa4, 1 << 31, 1 << 31);
		/* Enables transmitter de-emphasis level */
		/* Sets training 0 time */
		set_nbcfg_enable_bits(rs780_f0, 0xa0, 0x3F, 0x14);

		/* Enables strict TM4 detection */
		set_htiu_enable_bits(rs780_f0, 0x15, 0x1 << 22, 0x1 << 22);
		/* Enables proper DLL reset sequence */
		set_htiu_enable_bits(rs780_f0, 0x16, 0x1 << 10, 0x1 << 10);

		/* HyperTransport 3 Processor register settings to be done in northbridge */
		/* Enables error-retry mode */
		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130, 1 << 0, 1 << 0);
		/* Enables scrambling */
		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170, 1 << 3, 1 << 3);
		/* Enables transmitter de-emphasis
		 * This depends on the PCB design and the trace */
		/* TODO: */
		/* Disables command throttling */
		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10);
		/* Sets Training 0 Time. See T0Time table for encodings */
		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x20);
		/* TODO: */
		#endif	/* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */
	}
}

#if !IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
/*******************************************************
* Optimize k8 with UMA.
* See BKDG_NPT_0F guide for details.
* The processor node is addressed by its Node ID on the HT link and can be
* accessed with a device number in the PCI configuration space on Bus0.
* The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped
* to Device 25, and so on.
* The processor implements configuration registers in PCI configuration
* space using the following four headers
*	Function0: HT technology configuration
*	Function1: Address map configuration
*	Function2: DRAM and HT technology Trace mode configuration
*	Function3: Miscellaneous configuration
*******************************************************/
static void k8_optimization(void)
{
	pci_devfn_t k8_f0, k8_f2, k8_f3;
	msr_t msr;

	printk(BIOS_INFO, "k8_optimization()\n");
	k8_f0 = PCI_DEV(0, 0x18, 0);
	k8_f2 = PCI_DEV(0, 0x18, 2);
	k8_f3 = PCI_DEV(0, 0x18, 3);

	/* 8.6.6 K8 Buffer Allocation Settings */
	pci_write_config32(k8_f0, 0x90, 0x01700169);	/* CIM NPT_Optimization */
	set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28);
	set_nbcfg_enable_bits(k8_f0, 0x68, 3 << 26, 3 << 26);
	set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11);
	/* set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); */	/* TODO */

	pci_write_config32(k8_f3, 0x70, 0x51220111);
	pci_write_config32(k8_f3, 0x74, 0x50404021);
	pci_write_config32(k8_f3, 0x78, 0x08002A00);
	if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12)
		pci_write_config32(k8_f3, 0x7C, 0x0000211A); /* dual core */
	else
		pci_write_config32(k8_f3, 0x7C, 0x0000212B); /* single core */
	set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25);

	set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
	set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24);
	set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 0 << 10);
	set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2);
	set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);

	msr = rdmsr(0xC001001F);
	msr.lo &= ~(1 << 9);
	msr.hi &= ~(1 << 4);
	wrmsr(0xC001001F, msr);
}
#else
#define k8_optimization() do {} while (0)
#endif	/* !CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */

#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
static void fam10_optimization(void)
{
	pci_devfn_t cpu_f0, cpu_f2, cpu_f3;
	u32 val;

	printk(BIOS_INFO, "fam10_optimization()\n");

	cpu_f0 = PCI_DEV(0, 0x18, 0);
	cpu_f2 = PCI_DEV(0, 0x18, 2);
	cpu_f3 = PCI_DEV(0, 0x18, 3);

	/* 8.6.4.1 */
	/* Table 8-13 */
	pci_write_config32(cpu_f0, 0x90, 0x808502D0);
	/* Table 8-14 */
	pci_write_config32(cpu_f0, 0x94, 0x00000000);

	/* Table 8-15 */
	val = pci_read_config32(cpu_f0, 0x68);
	val |= 1 << 24;
	pci_write_config32(cpu_f0, 0x68, val);

	/* Table 8-16 */
	val = pci_read_config32(cpu_f0, 0x84);
	val &= ~(1 << 12);
	pci_write_config32(cpu_f0, 0x84, val);

	/* Table 8-17 */
	val = pci_read_config32(cpu_f2, 0x90);
	val &= ~(1 << 10);
	pci_write_config32(cpu_f2, 0x90, val);

	/* Table 8-18 */
	pci_write_config32(cpu_f3, 0x6C, 0x60018051);
	/* Table 8-19 */
	pci_write_config32(cpu_f3, 0x70, 0x60321151);
	/* Table 8-20 */
	pci_write_config32(cpu_f3, 0x74, 0x00980101);
	/* Table 8-21 */
	pci_write_config32(cpu_f3, 0x78, 0x00200C14);
	/* Table 8-22 */
	pci_write_config32(cpu_f3, 0x7C, 0x00070811); /* TODO: Check if L3 Cache is enabled. */

	/* Table 8-23 */
	Set_NB32(cpu_f3, 0x140, 0x00D33656);
	/* Table 8-24 */
	Set_NB32(cpu_f3, 0x144, 0x00000036);
	/* Table 8-25 */
	Set_NB32(cpu_f3, 0x148, 0x8000832A);
	/* Table 8-26 */
	Set_NB32(cpu_f3, 0x158, 0);
	/*          L3 Disabled:  L3 Enabled: */
	/* cores:    2   3    4    2   3    4  */
	/* bit8:4   28  26   24   24  20   16 */
	if (!l3_cache()) {
		Set_NB32(cpu_f3, 0x1A0, 4 << 12 | (24 + 2*(4-cpu_core_number())) << 4 | 2);
	} else {
		Set_NB32(cpu_f3, 0x1A0, 4 << 12 | (16 + 4*(4-cpu_core_number())) << 4 | 4);
	}
}
#else
#define fam10_optimization() do {} while (0)
#endif	/* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */

/*****************************************
* rs780_por_pcicfg_init()
*****************************************/
static void rs780_por_pcicfg_init(pci_devfn_t nb_dev)
{
	/* enable PCI Memory Access */
	set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02);
	/* Set RCRB Enable */
	set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x1);
	/* allow decode of 640k-1MB */
	set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xEF), 0x10);
	/* Enable PM2_CNTL(BAR2) IO mapped cfg write access to be broadcast to both NB and SB */
	set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x4);
	/* Power Management Register Enable */
	set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x80);

	/* Reg4Ch[1]=1 (APIC_ENABLE) force CPU request with address 0xFECx_xxxx to south-bridge
	 * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation
	 * BMMsgEn */
	set_nbcfg_enable_bits_8(nb_dev, 0x4C, (u8)(~0x00), 0x42 | 1);

	/* Reg4Ch[16]=1 (WakeC2En) enable Wake_from_C2 message generation.
	 * Reg4Ch[18]=1 (P4IntEnable) Enable north-bridge to accept MSI with address 0xFEEx_xxxx from south-bridge */
	set_nbcfg_enable_bits_8(nb_dev, 0x4E, (u8)(~0xFF), 0x05);
	/* Reg94h[4:0] = 0x0  P drive strength offset 0
	 * Reg94h[6:5] = 0x2  P drive strength additive adjust */
	set_nbcfg_enable_bits_8(nb_dev, 0x94, (u8)(~0x80), 0x40);

	/* Reg94h[20:16] = 0x0  N drive strength offset 0
	 * Reg94h[22:21] = 0x2  N drive strength additive adjust */
	set_nbcfg_enable_bits_8(nb_dev, 0x96, (u8)(~0x80), 0x40);

	/* Reg80h[4:0] = 0x0  Termination offset
	 * Reg80h[6:5] = 0x2  Termination additive adjust */
	set_nbcfg_enable_bits_8(nb_dev, 0x80, (u8)(~0x80), 0x40);

	/* Reg80h[14] = 0x1   Enable receiver termination control */
	set_nbcfg_enable_bits_8(nb_dev, 0x81, (u8)(~0xFF), 0x40);

	/* Reg94h[15] = 0x1 Enables HT transmitter advanced features to be turned on
	 * Reg94h[14] = 0x1  Enable drive strength control */
	set_nbcfg_enable_bits_8(nb_dev, 0x95, (u8)(~0x3F), 0xC4);

	/* Reg94h[31:29] = 0x7 Enables HT transmitter de-emphasis */
	set_nbcfg_enable_bits_8(nb_dev, 0x97, (u8)(~0x1F), 0xE0);

	/* Reg8Ch[9] enables Gfx Debug BAR programming
	 * Reg8Ch[10] enables Gfx Debug BAR operation
	 * Enable programming of the debug bar now, but enable
	 * operation only after it has been programmed */
	set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x02);
}

static void rs780_por_mc_index_init(pci_devfn_t nb_dev)
{
	set_nbmc_enable_bits(nb_dev, 0x7A, ~0xFFFFFF80, 0x0000005F);
	set_nbmc_enable_bits(nb_dev, 0xD8, ~0x00000000, 0x00600060);
	set_nbmc_enable_bits(nb_dev, 0xD9, ~0x00000000, 0x00600060);
	set_nbmc_enable_bits(nb_dev, 0xE0, ~0x00000000, 0x00000000);
	set_nbmc_enable_bits(nb_dev, 0xE1, ~0x00000000, 0x00000000);
	set_nbmc_enable_bits(nb_dev, 0xE8, ~0x00000000, 0x003E003E);
	set_nbmc_enable_bits(nb_dev, 0xE9, ~0x00000000, 0x003E003E);
}

static void rs780_por_misc_index_init(pci_devfn_t nb_dev)
{
	/* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL
	 * Block non-snoop DMA request if PMArbDis is set.
	 * Set BMSetDis */
	set_nbmisc_enable_bits(nb_dev, 0x0B, ~0xFFFF0000, 0x00000180);
	set_nbmisc_enable_bits(nb_dev, 0x01, ~0xFFFFFFFF, 0x00000040);

	/* NBCFG (NBMISCIND 0x0): NB_CNTL -
	 *   HIDE_NB_AGP_CAP  ([0], default=1)HIDE
	 *   HIDE_P2P_AGP_CAP ([1], default=1)HIDE
	 *   HIDE_NB_GART_BAR ([2], default=1)HIDE
	 *   AGPMODE30        ([4], default=0)DISABLE
	 *   AGP30ENCHANCED   ([5], default=0)DISABLE
	 *   HIDE_AGP_CAP     ([8], default=1)ENABLE */
	set_nbmisc_enable_bits(nb_dev, 0x00, ~0xFFFF0000, 0x00000506);	/* set bit 10 for MSI */

	/* NBMISCIND:0x6A[16]= 1 SB link can get a full swing
	 *      set_nbmisc_enable_bits(nb_dev, 0x6A, 0ffffffffh, 000010000);
	 * NBMISCIND:0x6A[17]=1 Set CMGOOD_OVERRIDE. */
	set_nbmisc_enable_bits(nb_dev, 0x6A, ~0xffffffff, 0x00020000);

	/* NBMISIND:0x40 Bit[8]=1 and Bit[10]=1 following bits are required to set in order to allow LVDS or PWM features to work. */
	set_nbmisc_enable_bits(nb_dev, 0x40, ~0xffffffff, 0x00000500);

	/* NBMISIND:0xC Bit[13]=1 Enable GSM mode for C1e or C3 with pop-up. */
	set_nbmisc_enable_bits(nb_dev, 0x0C, ~0xffffffff, 0x00002000);

	/* Set NBMISIND:0x1F[3] to map NB F2 interrupt pin to INTB# */
	set_nbmisc_enable_bits(nb_dev, 0x1F, ~0xffffffff, 0x00000008);

	/*
	 * Enable access to DEV8
	 * Enable setPower message for all ports
	 */
	set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, 1 << 6);
	set_nbmisc_enable_bits(nb_dev, 0x0b, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x5D, 1 << 20, 1 << 20);
	set_nbmisc_enable_bits(nb_dev, 0x5F, 1 << 20, 1 << 20);

	set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7);
	set_nbmisc_enable_bits(nb_dev, 0x07, 0x000000f0, 0x30);

	set_nbmisc_enable_bits(nb_dev, 0x01, 0xFFFFFFFF, 0x48);
	/* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */
	set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x500180);
}

/*****************************************
* Some setting is from rpr. Some is from CIMx.
*****************************************/
static void rs780_por_htiu_index_init(pci_devfn_t nb_dev)
{
#if 0				/* get from rpr. */
	set_htiu_enable_bits(nb_dev, 0x1C, 0x1<<17, 0x1<<17);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<0,  0x0<<0);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<1,  0x1<<1);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<9,  0x1<<9);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<13, 0x1<<13);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<17, 0x1<<17);
	set_htiu_enable_bits(nb_dev, 0x06, 0x3<<15, 0x3<<15);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<25, 0x1<<25);
	set_htiu_enable_bits(nb_dev, 0x06, 0x1<<30, 0x1<<30);

	set_htiu_enable_bits(nb_dev, 0x07, 0x1<<0,  0x1<<0);
	set_htiu_enable_bits(nb_dev, 0x07, 0x1<<1,  0x0<<1);
	set_htiu_enable_bits(nb_dev, 0x07, 0x1<<2,  0x0<<2);
	set_htiu_enable_bits(nb_dev, 0x07, 0x1<<15, 0x1<<15);

	set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<0,  0x1<<0);
	set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<2,  0x2<<2);
	set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<4,  0x0<<4);

	/* A12 only */
	set_htiu_enable_bits(nb_dev, 0x2D, 0x1<<4,  0x1<<4);
	set_htiu_enable_bits(nb_dev, 0x2D, 0x1<<6,  0x1<<6);
	set_htiu_enable_bits(nb_dev, 0x05, 0x1<<2,  0x1<<2);

	set_htiu_enable_bits(nb_dev, 0x1E, 0xFFFFFFFF, 0xFFFFFFFF);
#else  /* get from CIM. It is more reliable than above. */
	set_htiu_enable_bits(nb_dev, 0x05, (1<<10|1<<9), 1<<10 | 1<<9);
	set_htiu_enable_bits(nb_dev, 0x06, ~0xFFFFFFFE, 0x04203A202);

	set_htiu_enable_bits(nb_dev, 0x07, ~0xFFFFFFF9, 0x8001/*  | 7 << 8 */); /* fam 10 */

	set_htiu_enable_bits(nb_dev, 0x15, ~0xFFFFFFFF, 1<<31| 1<<30 | 1<<27);
	set_htiu_enable_bits(nb_dev, 0x1C, ~0xFFFFFFFF, 0xFFFE0000);

	set_htiu_enable_bits(nb_dev, 0x4B, (1<<11), 1<<11);

	set_htiu_enable_bits(nb_dev, 0x0C, ~0xFFFFFFC0, 1<<0|1<<3);

	set_htiu_enable_bits(nb_dev, 0x17, (1<<27|1<<1), 0x1<<1);
	set_htiu_enable_bits(nb_dev, 0x17, 0x1 << 30, 0x1<<30);

	set_htiu_enable_bits(nb_dev, 0x19, (0xFFFFF+(1<<31)), 0x186A0+(1<<31));

	set_htiu_enable_bits(nb_dev, 0x16, (0x3F<<10), 0x7<<10);

	set_htiu_enable_bits(nb_dev, 0x23, 0xFFFFFFF, 1<<28);

	set_htiu_enable_bits(nb_dev, 0x1E, 0xFFFFFFFF, 0xFFFFFFFF);
#endif
}

/*****************************************
* Configure RS780 registers to power-on default RPR.
* POR: Power On Reset
* RPR: Register Programming Requirements
*****************************************/
static void rs780_por_init(pci_devfn_t nb_dev)
{
	printk(BIOS_INFO, "rs780_por_init\n");
	/* ATINB_PCICFG_POR_TABLE, initialize the values for rs780 PCI Config registers */
	rs780_por_pcicfg_init(nb_dev);

	/* ATINB_MCIND_POR_TABLE */
	rs780_por_mc_index_init(nb_dev);

	/* ATINB_MISCIND_POR_TABLE */
	rs780_por_misc_index_init(nb_dev);

	/* ATINB_HTIUNBIND_POR_TABLE */
	rs780_por_htiu_index_init(nb_dev);

	/* ATINB_CLKCFG_PORT_TABLE */
	/* rs780 A11 SB Link full swing? */

	/* SET NB_MISC_REG01 BIT8 to Enable HDMI, reference CIMX_5_9_3 NBPOR_InitPOR(),
	 * then the accesses to internal graphics IO space 0x60/0x64, are forwarded to
	 * nbconfig:0x60/0x64
	 */

	set_nbmisc_enable_bits(nb_dev, 0x01, ~(1 << 8), (1 << 8));
}

/* enable CFG access to Dev8, which is the SB P2P Bridge */
void enable_rs780_dev8(void)
{
	set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6);
}

void rs780_early_setup(void)
{
	pci_devfn_t nb_dev = PCI_DEV(0, 0, 0);
	printk(BIOS_INFO, "rs780_early_setup()\n");

	/* The printk(BIOS_INFO, s) below cause the system unstable. */
	switch (get_nb_rev(nb_dev)) {
	case REV_RS780_A11:
		/* printk(BIOS_INFO, "NB Revision is A11.\n"); */
		break;
	case REV_RS780_A12:
		/* printk(BIOS_INFO, "NB Revision is A12.\n"); */
		break;
	case REV_RS780_A13:
		/* printk(BIOS_INFO, "NB Revision is A13.\n"); */
		break;
	}

	if (is_famly10())
		fam10_optimization();
	else
		k8_optimization();

	rs780_por_init(nb_dev);
}