summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb700/sata.c
blob: 98b8b6ad7791460140db448d070042ba14161a63 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2010 Advanced Micro Devices, Inc.
 * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
#include <device/mmio.h>
#include <option.h>
#include "sb700.h"

static int sata_drive_detect(int portnum, uint16_t iobar)
{
	u8 byte, byte2;
	u8 byte_prev, byte2_prev;
	int i = 0;
	byte_prev = byte2_prev = 0;
	outb(0xa0 + 0x10 * (portnum % 2), iobar + 0x6);
	while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7),
		(byte != (0xa0 + 0x10 * (portnum % 2))) ||
		((byte2 & 0x88) != 0)) {
		if ((byte != byte_prev) || (byte2 != byte2_prev))
			printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2);
		if (byte != (0xa0 + 0x10 * (portnum % 2))) {
			/* This will happen at the first iteration of this loop
			 * if the first SATA port is unpopulated and the
			 * second SATA port is populated.
			 */
			printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
				"retrying init\n", i * 10);
			return 1;
		} else {
			if (i == 0)
				printk(BIOS_SPEW, "drive detection not yet completed, "
					"waiting...\n");
		}
		mdelay(10);
		i++;
		byte_prev = byte;
		byte2_prev = byte2;

		/* Detect stuck SATA controller and attempt reset */
		if (i > 1024) {
			printk(BIOS_DEBUG, "drive detection not done after %i ms, "
				"resetting HBA and retrying init\n", i * 10);
			return 2;
		}
	}
	printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10);
	return 0;
}

/* This function can be overloaded in mainboard.c */
void __weak sb7xx_51xx_setup_sata_phys(struct device *dev)
{
	/* RPR7.6.1 Program the PHY Global Control to 0x2C00 */
	pci_write_config16(dev, 0x86, 0x2c00);

	/* RPR7.6.2 SATA GENI PHY ports setting */
	pci_write_config32(dev, 0x88, 0x01B48017);
	pci_write_config32(dev, 0x8c, 0x01B48019);
	pci_write_config32(dev, 0x90, 0x01B48016);
	pci_write_config32(dev, 0x94, 0x01B48016);
	pci_write_config32(dev, 0x98, 0x01B48016);
	pci_write_config32(dev, 0x9c, 0x01B48016);

	/* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */
	pci_write_config16(dev, 0xa0, 0xA09A);
	pci_write_config16(dev, 0xa2, 0xA09F);
	pci_write_config16(dev, 0xa4, 0xA07A);
	pci_write_config16(dev, 0xa6, 0xA07A);
	pci_write_config16(dev, 0xa8, 0xA07A);
	pci_write_config16(dev, 0xaa, 0xA07A);
}

/* This function can be overloaded in mainboard.c */
void __weak sb7xx_51xx_setup_sata_port_indication(void *sata_bar5)
{
	uint32_t dword;

	/* RPR7.9 Program Port Indication Registers */
	dword = read32(sata_bar5 + 0xf8);
	dword &= ~(0x3f << 12);	/* Ports 0 and 1 are eSATA */
	dword |= (0x3 << 12);
	dword &= ~0x3f;
	write32(sata_bar5 + 0xf8, dword);

	dword = read32(sata_bar5 + 0xfc);
	dword |= 0x1 << 20;	/* At least one eSATA port is present */
	write32(sata_bar5 + 0xfc, dword);
}

static void sata_init(struct device *dev)
{
	u8 byte;
	u16 word;
	u32 dword;
	u8 rev_id;
	void *sata_bar5;
	uint16_t sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
	uint16_t ide_bar0, ide_bar1, ide_bar2, ide_bar3;
	uint16_t current_bar;
	int i, j, ret;
	uint8_t nvram;
	uint8_t sata_ahci_mode;
	uint8_t sata_alpm_enable;
	uint8_t port_count;
	uint8_t max_port_count;
	uint8_t ide_io_enabled;
	uint8_t ide_legacy_io_enabled;

	sata_ahci_mode = 0;
	if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS)
		sata_ahci_mode = !!nvram;

	sata_alpm_enable = 0;
	if (get_option(&nvram, "sata_alpm") == CB_SUCCESS)
		sata_alpm_enable = !!nvram;

	struct device *sm_dev;
	/* SATA SMBus Disable */
	sm_dev = pcidev_on_root(0x14, 0);

	/* WARNING
	 * Enabling the SATA link latency enhancement (SMBUS 0xAD bit 5)
	 * causes random persistent drive detection failures until it is cleared,
	 * with the probabability of detection failure rising exponentially with
	 * the number of drives attached to the controller!
	 * This happens on Rev15 H/W.
	 * Do NOT follow the RPR advice; leave this bit set at all times...
	 */
	byte = pci_read_config8(sm_dev, 0xad);
	/* Disable SATA SMBUS */
	byte |= (1 << 1);
	/* Enable SATA and power saving */
	byte |= (1 << 0);
	/* Disable link latency enhancement */
	byte |= (1 << 5);
	pci_write_config8(sm_dev, 0xad, byte);

	/* Take the PHY logic out of reset */
	word = pci_read_config16(dev, 0x84);
	word |= 0x1 << 2;
	word &= ~0x1f8;
	pci_write_config16(dev, 0x84, word);

	/* get rev_id */
	rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;

	printk(BIOS_SPEW, "rev_id=%x\n", rev_id);

	/* Enable combined mode */
	byte = pci_read_config8(sm_dev, 0xad);
	byte |= (1 << 3);
	pci_write_config8(sm_dev, 0xad, byte);

	struct device *ide_dev;
	/* IDE Device */
	ide_dev = pcidev_on_root(0x14, 1);

	/* Disable legacy IDE mode (enable PATA_BAR0/2) */
	byte = pci_read_config8(ide_dev, 0x09);
	ide_legacy_io_enabled = !(byte & 0x1);
	byte |= 0x1;
	pci_write_config8(ide_dev, 0x09, byte);

	/* Enable IDE I/O access (enable PATA_BAR0/2) */
	byte = pci_read_config8(ide_dev, 0x04);
	ide_io_enabled = byte & 0x1;
	byte |= 0x1;
	pci_write_config8(ide_dev, 0x04, byte);

	/* RPR 7.2 SATA Initialization */
	/* Set the interrupt Mapping to INTG# */
	byte = pci_read_config8(sm_dev, 0xaf);
	byte = 0x6 << 2;
	pci_write_config8(sm_dev, 0xaf, byte);

	/* get base address */
	sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF);
	sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
	sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
	sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
	sata_bar3 = pci_read_config16(dev, 0x1c) & ~0x3;
	sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;

	printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0);	/* 3030 */
	printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1);	/* 3070 */
	printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2);	/* 3040 */
	printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3);	/* 3080 */
	printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4);	/* 3000 */
	printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5);	/* e0309000 */

	ide_bar0 = pci_read_config16(ide_dev, 0x10) & ~0x7;
	ide_bar1 = pci_read_config16(ide_dev, 0x14) & ~0x3;
	ide_bar2 = pci_read_config16(ide_dev, 0x18) & ~0x7;
	ide_bar3 = pci_read_config16(ide_dev, 0x1c) & ~0x3;
	printk(BIOS_SPEW, "ide_bar0=%x\n", ide_bar0);
	printk(BIOS_SPEW, "ide_bar1=%x\n", ide_bar1);
	printk(BIOS_SPEW, "ide_bar2=%x\n", ide_bar2);
	printk(BIOS_SPEW, "ide_bar3=%x\n", ide_bar3);

	/* Program the Subsystem ID/VID to 0x43801002 */
	dword = 0x43801002;
	pci_write_config32(dev, 0x2c, dword);

	/* SERR-Enable */
	word = pci_read_config16(dev, 0x04);
	word |= (1 << 8);
	pci_write_config16(dev, 0x04, word);

	/* Dynamic power saving */
	byte = pci_read_config8(dev, 0x40);
	byte |= (1 << 2);
	pci_write_config8(dev, 0x40, byte);

	/* Unlock subclass and certain BAR R/O registers */
	byte = pci_read_config8(dev, 0x40);
	byte |= (1 << 0);
	pci_write_config8(dev, 0x40, byte);

	/* Disable AHCI enhancement (AMD SP5100 RPR page 54) */
	dword = pci_read_config32(dev, 0x40);
	dword |= (1 << 23);
	pci_write_config32(dev, 0x40, dword);

	if (sata_ahci_mode) {
		/* Force number of ports to 6
		 * NOTE: This is not documented in the register
		 * reference guide, but CIMX needs to do this
		 * to activate all 6 ports when IDE is disabled.
		 */
		dword = read32(sata_bar5 + 0x00);
		dword &= ~0x7;
		dword |= 0x5;
		write32(sata_bar5 + 0x00, dword);
	} else {
		/* Set SATA Operation Mode, Set to IDE mode */
		byte = pci_read_config8(dev, 0x40);
		byte |= (1 << 4);
		pci_write_config8(dev, 0x40, byte);

		dword = 0x01018f00;
		pci_write_config32(dev, 0x8, dword);
	}

	/* Get maximum number of ports */
	max_port_count = read32(sata_bar5 + 0x00) & 0x1f;
	max_port_count++;
	printk(BIOS_SPEW, "Maximum SATA port count supported by silicon: %d\n", max_port_count);

	/* Set number of ports */
	dword = CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD;
	for (i = max_port_count; i < 32; i++)
		dword &= ~(0x1 << i);
	write32(sata_bar5 + 0x0c, dword);

	/* Disable ALPM if ALPM support not requested */
	if (!sata_alpm_enable) {
		dword = read32(sata_bar5 + 0xfc);
		dword &= ~(0x1 << 11);	/* Disable ALPM */
		write32(sata_bar5 + 0xfc, dword);
	}

	/* Enable SATA ports */
	byte = pci_read_config8(dev, 0x42);
	if (max_port_count <= 6) {
		byte |= 0x3f;
		for (i = 0; i < max_port_count; i++)
			byte &= ~(0x1 << i);
	} else {
		byte &= ~0x3f;
	}
	pci_write_config8(dev, 0x42, byte);

	if (sata_ahci_mode) {
		/* FIXME
		* SeaBIOS does not know how to spin
		* up the drives and therefore hangs
		* in AHCI init if this is enabled...
		*/
		/* Enable staggered spin-up */
		dword = read32(sata_bar5 + 0x00);
#if 0
		dword |= 0x1 << 27;
#else
		dword &= ~(0x1 << 27);
#endif
		write32(sata_bar5 + 0x00, dword);

		/* Reset the HBA to avoid stuck drives in SeaBIOS */
		dword = read32(sata_bar5 + 0x04);
		dword |= 0x1;
		write32(sata_bar5 + 0x04, dword);
	}

	sb7xx_51xx_setup_sata_phys(dev);
	sb7xx_51xx_setup_sata_port_indication(sata_bar5);

	/* Write protect Sub-Class Code */
	byte = pci_read_config8(dev, 0x40);
	byte &= ~(1 << 0);
	pci_write_config8(dev, 0x40, byte);

	/* Enable the SATA watchdog counter */
	byte = pci_read_config8(dev, 0x44);
	byte |= (1 << 0);
	pci_write_config8(dev, 0x44, byte);

	/* Set bit 29 and 24 for A12 */
	dword = pci_read_config32(dev, 0x40);
	if (rev_id < 0x14)	/* before A12 */
		dword |= (1 << 29);
	else
		dword &= ~(1 << 29); /* A14 and above */
	pci_write_config32(dev, 0x40, dword);

	/* set bit 21 for A12 */
	dword = pci_read_config32(dev, 0x48);
	if (rev_id < 0x14)	/* before A12 */
		dword |= 1 << 24 | 1 << 21;
	else {
		dword &= ~(1 << 24 | 1 << 21); /* A14 and above */
		dword &= ~0xFF80; /* 15:7 */
		dword |= 1 << 15 | 0x7F << 7 | 1 << 6;
	}
	pci_write_config32(dev, 0x48, dword);

	/* Program the watchdog counter to 0x10 */
	byte = 0x10;
	pci_write_config8(dev, 0x46, byte);

	/* Enable the I/O, MM, BusMaster access for SATA */
	byte = pci_read_config8(dev, 0x4);
	byte |= 7 << 0;
	pci_write_config8(dev, 0x4, byte);

#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_SUBTYPE_SP5100)
	/* Master Latency Timer */
	pci_write_config32(dev, 0xC, 0x00004000);
#endif

	/* Determine port count */
	port_count = 0;
	for (i = 0; i < 32; i++) {
		if (CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD & (0x1 << i))
			port_count = i;
	}
	port_count++;
	if (port_count > max_port_count)
		port_count = max_port_count;

	/* Send COMRESET to all ports */
	for (i = 0; i < port_count; i++) {
		/* Read in Port-N Serial ATA Control Register */
		byte = read8(sata_bar5 + 0x12C + 0x80 * i);

		/* Set Reset Bit */
		byte |= 0x1;
		write8((sata_bar5 + 0x12C + 0x80 * i), byte);

		/* Wait 1ms */
		mdelay(1);

		/* Clear Reset Bit */
		byte &= ~0x01;
		write8((sata_bar5 + 0x12C + 0x80 * i), byte);

		/* Wait 1ms */
		mdelay(1);
	}

	/* RPR7.7 SATA drive detection. */
	/* Use BAR5+0x128,BAR0 for Primary Slave */
	/* Use BAR5+0x1A8,BAR0 for Primary Slave */
	/* Use BAR5+0x228,BAR2 for Secondary Master */
	/* Use BAR5+0x2A8,BAR2 for Secondary Slave */
	/* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */
	/* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
	for (i = 0; i < port_count; i++) {
		byte = read8(sata_bar5 + 0x128 + 0x80 * i);
		printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
		byte &= 0xF;
		if (byte == 0x1) {
			/* If the drive status is 0x1 then we see it but we aren't talking to it. */
			/* Try to do something about it. */
			printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");

			/* Read in Port-N Serial ATA Control Register */
			byte = read8(sata_bar5 + 0x12C + 0x80 * i);

			/* Set Reset Bit and 1.5g bit */
			byte |= 0x11;
			write8((sata_bar5 + 0x12C + 0x80 * i), byte);

			/* Wait 1ms */
			mdelay(1);

			/* Clear Reset Bit */
			byte &= ~0x01;
			write8((sata_bar5 + 0x12C + 0x80 * i), byte);

			/* Wait 1ms */
			mdelay(1);

			/* Reread status */
			byte = read8(sata_bar5 + 0x128 + 0x80 * i);
			printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
			byte &= 0xF;
		}

		if (byte == 0x3) {
			for (j = 0; j < 10; j++) {
				if (i < 4)
					current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
				else
					current_bar = (pci_read_config8(sm_dev, 0xad) & (0x1 << 4))
						? ide_bar2 : ide_bar0;
				ret = sata_drive_detect(i, current_bar);
				if (ret == 0) {
					break;
				} else if (ret == 2) {
					/* Read in Port-N Serial ATA Control Register */
					byte = read8(sata_bar5 + 0x12C + 0x80 * i);

					/* Set Reset Bit */
					byte |= 0x1;
					write8((sata_bar5 + 0x12C + 0x80 * i), byte);

					/* Wait 1000ms */
					mdelay(1000);

					/* Clear Reset Bit */
					byte &= ~0x01;
					write8((sata_bar5 + 0x12C + 0x80 * i), byte);

					/* Wait 1ms */
					mdelay(1);
				}
			}
			if (sata_ahci_mode)
				printk(BIOS_DEBUG, "AHCI device %d is %sready after %i tries\n",
						i,
						(j == 10) ? "not " : "",
						(j == 10) ? j : j + 1);
			else
				printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n",
						(i / 2) ? "Secondary" : "Primary",
						(i % 2) ? "Slave" : "Master",
						(j == 10) ? "not " : "",
						(j == 10) ? j : j + 1);
		} else {
			if (sata_ahci_mode)
				printk(BIOS_DEBUG, "No AHCI SATA drive on Slot%i\n", i);
			else
				printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n",
						(i / 2) ? "Secondary" : "Primary",
						(i % 2) ? "Slave" : "Master", i);
		}
	}

	/* Restore IDE I/O access */
	if (!ide_io_enabled) {
		byte = pci_read_config8(ide_dev, 0x04);
		byte &= ~0x1;
		pci_write_config8(ide_dev, 0x04, byte);
	}

	/* Re-enable legacy IDE mode */
	if (ide_legacy_io_enabled) {
		byte = pci_read_config8(ide_dev, 0x09);
		byte &= ~0x1;
		pci_write_config8(ide_dev, 0x09, byte);
	}

	/* Below is CIM InitSataLateFar */
	if (sata_ahci_mode) {
		/* Disable combined mode */
		byte = pci_read_config8(sm_dev, 0xad);
		byte &= ~(1 << 3);
		pci_write_config8(sm_dev, 0xad, byte);
	} else {
		/* Enable interrupts from the HBA  */
		byte = read8(sata_bar5 + 0x4);
		byte |= 1 << 1;
		write8((sata_bar5 + 0x4), byte);
	}

	/* Clear error status */
	write32((sata_bar5 + 0x130), 0xFFFFFFFF);
	write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
	write32((sata_bar5 + 0x230), 0xFFFFFFFF);
	write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
	write32((sata_bar5 + 0x330), 0xFFFFFFFF);
	write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);

	/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
	/* ????? why CIM does not set the AcpiGpe0BlkAddr, but use it??? */

	/* word = 0x0000; */
	/* word = pm_ioread(0x28); */
	/* byte = pm_ioread(0x29); */
	/* word |= byte<<8; */
	/* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */
	/* write32(word, 0x80000000); */
}

static struct pci_operations lops_pci = {
	.set_subsystem = pci_dev_set_subsystem,
};

static struct device_operations sata_ops = {
	.read_resources = pci_dev_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = pci_dev_enable_resources,
	.init = sata_init,
	.scan_bus = 0,
	.ops_pci = &lops_pci,
};

static const struct pci_driver sata0_driver __pci_driver = {
	.ops = &sata_ops,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_SATA,
};

static const struct pci_driver sata1_driver __pci_driver = {
	.ops = &sata_ops,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI,
};

static const struct pci_driver sata2_driver __pci_driver = {
	.ops = &sata_ops,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI_AMD,
};