summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801ix/lpc.c
blob: 474c484ad60fe7d1a71995ab6d907cc467457fb1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2008-2009 coresystems GmbH
 *               2012 secunet Security Networks AG
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; version 2 of
 * the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <arch/ioapic.h>
#include <arch/acpi.h>
#include <cpu/x86/smm.h>
#include <arch/acpigen.h>
#include <cbmem.h>
#include <string.h>
#include "i82801ix.h"
#include "nvs.h"
#include <southbridge/intel/common/pciehp.h>
#include <drivers/intel/gma/i915.h>
#include <southbridge/intel/common/acpi_pirq_gen.h>

#define NMI_OFF	0

#define ENABLE_ACPI_MODE_IN_COREBOOT	0
#define TEST_SMM_FLASH_LOCKDOWN		0

typedef struct southbridge_intel_i82801ix_config config_t;

static void i82801ix_enable_apic(struct device *dev)
{
	u32 reg32;
	volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
	volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);

	/* Enable IOAPIC. Keep APIC Range Select at zero. */
	RCBA8(0x31ff) = 0x03;
	/* We have to read 0x31ff back if bit0 changed. */
	RCBA8(0x31ff);

	/* Lock maximum redirection entries (MRE), R/WO register. */
	*ioapic_index	= 0x01;
	reg32		= *ioapic_data;
	*ioapic_index	= 0x01;
	*ioapic_data	= reg32;

	setup_ioapic(VIO_APIC_VADDR, 2); /* ICH7 code uses id 2. */
}

static void i82801ix_enable_serial_irqs(struct device *dev)
{
	/* Set packet length and toggle silent mode bit for one frame. */
	pci_write_config8(dev, D31F0_SERIRQ_CNTL,
			  (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
}

/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
 * 0x00 - 0000 = Reserved
 * 0x01 - 0001 = Reserved
 * 0x02 - 0010 = Reserved
 * 0x03 - 0011 = IRQ3
 * 0x04 - 0100 = IRQ4
 * 0x05 - 0101 = IRQ5
 * 0x06 - 0110 = IRQ6
 * 0x07 - 0111 = IRQ7
 * 0x08 - 1000 = Reserved
 * 0x09 - 1001 = IRQ9
 * 0x0A - 1010 = IRQ10
 * 0x0B - 1011 = IRQ11
 * 0x0C - 1100 = IRQ12
 * 0x0D - 1101 = Reserved
 * 0x0E - 1110 = IRQ14
 * 0x0F - 1111 = IRQ15
 * PIRQ[n]_ROUT[7] - PIRQ Routing Control
 * 0x80 - The PIRQ is not routed.
 */

static void i82801ix_pirq_init(struct device *dev)
{
	struct device *irq_dev;
	/* Get the chip configuration */
	config_t *config = dev->chip_info;

	pci_write_config8(dev, D31F0_PIRQA_ROUT, config->pirqa_routing);
	pci_write_config8(dev, D31F0_PIRQB_ROUT, config->pirqb_routing);
	pci_write_config8(dev, D31F0_PIRQC_ROUT, config->pirqc_routing);
	pci_write_config8(dev, D31F0_PIRQD_ROUT, config->pirqd_routing);

	pci_write_config8(dev, D31F0_PIRQE_ROUT, config->pirqe_routing);
	pci_write_config8(dev, D31F0_PIRQF_ROUT, config->pirqf_routing);
	pci_write_config8(dev, D31F0_PIRQG_ROUT, config->pirqg_routing);
	pci_write_config8(dev, D31F0_PIRQH_ROUT, config->pirqh_routing);

	/* Eric Biederman once said we should let the OS do this.
	 * I am not so sure anymore he was right.
	 */

	for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
		u8 int_pin=0, int_line=0;

		if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
			continue;

		int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);

		switch (int_pin) {
		case 1: /* INTA# */ int_line = config->pirqa_routing; break;
		case 2: /* INTB# */ int_line = config->pirqb_routing; break;
		case 3: /* INTC# */ int_line = config->pirqc_routing; break;
		case 4: /* INTD# */ int_line = config->pirqd_routing; break;
		}

		if (!int_line)
			continue;

		pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
	}
}

static void i82801ix_gpi_routing(struct device *dev)
{
	/* Get the chip configuration */
	config_t *config = dev->chip_info;
	u32 reg32 = 0;

	/* An array would be much nicer here, or some
	 * other method of doing this.
	 */
	reg32 |= (config->gpi0_routing & 0x03) << 0;
	reg32 |= (config->gpi1_routing & 0x03) << 2;
	reg32 |= (config->gpi2_routing & 0x03) << 4;
	reg32 |= (config->gpi3_routing & 0x03) << 6;
	reg32 |= (config->gpi4_routing & 0x03) << 8;
	reg32 |= (config->gpi5_routing & 0x03) << 10;
	reg32 |= (config->gpi6_routing & 0x03) << 12;
	reg32 |= (config->gpi7_routing & 0x03) << 14;
	reg32 |= (config->gpi8_routing & 0x03) << 16;
	reg32 |= (config->gpi9_routing & 0x03) << 18;
	reg32 |= (config->gpi10_routing & 0x03) << 20;
	reg32 |= (config->gpi11_routing & 0x03) << 22;
	reg32 |= (config->gpi12_routing & 0x03) << 24;
	reg32 |= (config->gpi13_routing & 0x03) << 26;
	reg32 |= (config->gpi14_routing & 0x03) << 28;
	reg32 |= (config->gpi15_routing & 0x03) << 30;

	pci_write_config32(dev, D31F0_GPIO_ROUT, reg32);
}

static void i82801ix_power_options(struct device *dev)
{
	u8 reg8;
	u16 reg16, pmbase;
	u32 reg32;
	const char *state;
	/* Get the chip configuration */
	config_t *config = dev->chip_info;

	int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
	int nmi_option;

	/* BIOS must program... */
	reg32 = pci_read_config32(dev, 0xac);
	pci_write_config32(dev, 0xac, reg32 | (1 << 30) | (3 << 8));

	/* Which state do we want to goto after g3 (power restored)?
	 * 0 == S0 Full On
	 * 1 == S5 Soft Off
	 *
	 * If the option is not existent (Laptops), use MAINBOARD_POWER_ON.
	 */
	pwr_on = MAINBOARD_POWER_ON;
	get_option(&pwr_on, "power_on_after_fail");

	reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3);
	reg8 &= 0xfe;
	switch (pwr_on) {
	case MAINBOARD_POWER_OFF:
		reg8 |= 1;
		state = "off";
		break;
	case MAINBOARD_POWER_ON:
		reg8 &= ~1;
		state = "on";
		break;
	case MAINBOARD_POWER_KEEP:
		reg8 &= ~1;
		state = "state keep";
		break;
	default:
		state = "undefined";
	}

	reg8 |= (3 << 4);	/* avoid #S4 assertions */
	reg8 &= ~(1 << 3);	/* minimum asssertion is 1 to 2 RTCCLK */

	pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8);
	printk(BIOS_INFO, "Set power %s after power failure.\n", state);

	/* Set up NMI on errors. */
	reg8 = inb(0x61);
	reg8 &= 0x0f;		/* Higher Nibble must be 0 */
	reg8 &= ~(1 << 3);	/* IOCHK# NMI Enable */
	// reg8 &= ~(1 << 2);	/* PCI SERR# Enable */
	reg8 |= (1 << 2); /* PCI SERR# Disable for now */
	outb(reg8, 0x61);

	reg8 = inb(0x74); /* Read from 0x74 as 0x70 is write only. */
	nmi_option = NMI_OFF;
	get_option(&nmi_option, "nmi");
	if (nmi_option) {
		printk(BIOS_INFO, "NMI sources enabled.\n");
		reg8 &= ~(1 << 7);	/* Set NMI. */
	} else {
		printk(BIOS_INFO, "NMI sources disabled.\n");
		reg8 |= (1 << 7);	/* Can't mask NMI from PCI-E and NMI_NOW */
	}
	outb(reg8, 0x70);

	/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
	reg16 = pci_read_config16(dev, D31F0_GEN_PMCON_1);
	reg16 &= ~(3 << 0);	// SMI# rate 1 minute
	reg16 |= (1 << 2);	// CLKRUN_EN - Mobile/Ultra only
	reg16 |= (1 << 3);	// Speedstep Enable - Mobile/Ultra only
	reg16 |= (1 << 5);	// CPUSLP_EN Desktop only

	if (config->c4onc3_enable)
		reg16 |= (1 << 7);

	// another laptop wants this?
	// reg16 &= ~(1 << 10);	// BIOS_PCI_EXP_EN - Desktop/Mobile only
	reg16 |= (1 << 10);	// BIOS_PCI_EXP_EN - Desktop/Mobile only
#if DEBUG_PERIODIC_SMIS
	/* Set DEBUG_PERIODIC_SMIS in i82801ix.h to debug using
	 * periodic SMIs.
	 */
	reg16 |= (3 << 0); // Periodic SMI every 8s
#endif
	if (config->c5_enable)
		reg16 |= (1 << 11); /* Enable C5, C6 and PMSYNC# */
	pci_write_config16(dev, D31F0_GEN_PMCON_1, reg16);

	/* Set exit timings for C5/C6. */
	if (config->c5_enable) {
		reg8 = pci_read_config8(dev, D31F0_C5_EXIT_TIMING);
		reg8 &= ~((7 << 3) | (7 << 0));
		if (config->c6_enable)
			reg8 |= (5 << 3) | (3 << 0); /* 38-44us PMSYNC# to STPCLK#,
							95-102us DPRSTP# to STP_CPU# */
		else
			reg8 |= (0 << 3) | (1 << 0); /* 16-17us PMSYNC# to STPCLK#,
							34-40us DPRSTP# to STP_CPU# */
		pci_write_config8(dev, D31F0_C5_EXIT_TIMING, reg8);
	}

	// Set the board's GPI routing.
	i82801ix_gpi_routing(dev);

	pmbase = pci_read_config16(dev, 0x40) & 0xfffe;

	outl(config->gpe0_en, pmbase + 0x28);
	outw(config->alt_gp_smi_en, pmbase + 0x38);

	/* Set up power management block and determine sleep mode */
	reg16 = inw(pmbase + 0x00); /* PM1_STS */
	outw(reg16, pmbase + 0x00); /* Clear status bits. At least bit11 (power
				       button override) must be cleared or SCI
				       will be constantly fired and OSPM must
				       not know about it (ACPI spec says to
				       ignore the bit). */
	reg32 = inl(pmbase + 0x04); // PM1_CNT
	reg32 &= ~(7 << 10);	// SLP_TYP
	outl(reg32, pmbase + 0x04);

	/* Set duty cycle for hardware throttling (defaults to 0x0: 50%). */
	reg32 = inl(pmbase + 0x10);
	reg32 &= ~(7 << 5);
	reg32 |= (config->throttle_duty & 7) << 5;
	outl(reg32, pmbase + 0x10);
}

static void i82801ix_configure_cstates(struct device *dev)
{
	u8 reg8;

	reg8 = pci_read_config8(dev, D31F0_CxSTATE_CNF);
	reg8 |= (1 << 4) | (1 << 3) | (1 << 2);	// Enable Popup & Popdown
	pci_write_config8(dev, D31F0_CxSTATE_CNF, reg8);

	// Set Deeper Sleep configuration to recommended values
	reg8 = pci_read_config8(dev, D31F0_C4TIMING_CNT);
	reg8 &= 0xf0;
	reg8 |= (2 << 2);	// Deeper Sleep to Stop CPU: 34-40us
	reg8 |= (2 << 0);	// Deeper Sleep to Sleep: 15us
	pci_write_config8(dev, D31F0_C4TIMING_CNT, reg8);

	/* We could enable slow-C4 exit here, if someone needs it? */
}

static void i82801ix_rtc_init(struct device *dev)
{
	u8 reg8;
	int rtc_failed;

	reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3);
	rtc_failed = reg8 & RTC_BATTERY_DEAD;
	if (rtc_failed) {
		reg8 &= ~RTC_BATTERY_DEAD;
		pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8);
	}
	printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed);

	cmos_init(rtc_failed);
}

static void enable_hpet(void)
{
	u32 reg32;

	/* Move HPET to default address 0xfed00000 and enable it */
	reg32 = RCBA32(RCBA_HPTC);
	reg32 |= (1 << 7); // HPET Address Enable
	reg32 &= ~(3 << 0);
	RCBA32(RCBA_HPTC) = reg32;
}

static void enable_clock_gating(void)
{
	u32 reg32;

	/* Enable DMI dynamic clock gating. */
	RCBA32(RCBA_DMIC) |= 3;

	/* Enable Clock Gating for most devices. */
	reg32 = RCBA32(RCBA_CG);
	reg32 |= (1 << 31);	/* LPC dynamic clock gating */
	/* USB UHCI dynamic clock gating: */
	reg32 |= (1 << 29) | (1 << 28);
	/* SATA dynamic clock gating [0-3]: */
	reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
	reg32 |= (1 << 23);	/* LAN static clock gating (if LAN disabled) */
	reg32 |= (1 << 22);	/* HD audio dynamic clock gating */
	reg32 &= ~(1 << 21);	/* No HD audio static clock gating */
	reg32 &= ~(1 << 20);	/* No USB EHCI static clock gating */
	reg32 |= (1 << 19);	/* USB EHCI dynamic clock gating */
	/* More SATA dynamic clock gating [4-5]: */
	reg32 |= (1 << 18) | (1 << 17);
	reg32 |= (1 << 16);	/* PCI dynamic clock gating */
	/* PCIe, DMI dynamic clock gating: */
	reg32 |= (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1);
	reg32 |= (1 << 0);	/* PCIe root port static clock gating */
	RCBA32(RCBA_CG) = reg32;

	/* Enable SPI dynamic clock gating. */
	RCBA32(0x38c0) |= 7;
}

#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
static void i82801ix_lock_smm(struct device *dev)
{
#if TEST_SMM_FLASH_LOCKDOWN
	u8 reg8;
#endif

	if (!acpi_is_wakeup_s3()) {
#if ENABLE_ACPI_MODE_IN_COREBOOT
		printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n");
		outb(APM_CNT_ACPI_ENABLE, APM_CNT); // Enable ACPI mode
		printk(BIOS_DEBUG, "done.\n");
#else
		printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
		outb(APM_CNT_ACPI_DISABLE, APM_CNT); // Disable ACPI mode
		printk(BIOS_DEBUG, "done.\n");
#endif
	} else {
		printk(BIOS_DEBUG, "S3 wakeup, enabling ACPI via APMC\n");
		outb(APM_CNT_ACPI_ENABLE, APM_CNT);
	}
	/* Don't allow evil boot loaders, kernels, or
	 * userspace applications to deceive us:
	 */
	smm_lock();

#if TEST_SMM_FLASH_LOCKDOWN
	/* Now try this: */
	printk(BIOS_DEBUG, "Locking BIOS to RO... ");
	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
	printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
			(reg8&1)?"rw":"ro");
	reg8 &= ~(1 << 0);			/* clear BIOSWE */
	pci_write_config8(dev, 0xdc, reg8);
	reg8 |= (1 << 1);			/* set BLE */
	pci_write_config8(dev, 0xdc, reg8);
	printk(BIOS_DEBUG, "ok.\n");
	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
	printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
			(reg8&1)?"rw":"ro");

	printk(BIOS_DEBUG, "Writing:\n");
	*(volatile u8 *)0xfff00000 = 0x00;
	printk(BIOS_DEBUG, "Testing:\n");
	reg8 |= (1 << 0);			/* set BIOSWE */
	pci_write_config8(dev, 0xdc, reg8);

	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
	printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
			(reg8&1)?"rw":"ro");
	printk(BIOS_DEBUG, "Done.\n");
#endif
}
#endif

static void lpc_init(struct device *dev)
{
	printk(BIOS_DEBUG, "i82801ix: lpc_init\n");

	/* Set the value for PCI command register. */
	pci_write_config16(dev, PCI_COMMAND, 0x000f);

	/* IO APIC initialization. */
	i82801ix_enable_apic(dev);

	i82801ix_enable_serial_irqs(dev);

	/* Setup the PIRQ. */
	i82801ix_pirq_init(dev);

	/* Setup power options. */
	i82801ix_power_options(dev);

	/* Configure Cx state registers */
	if (LPC_IS_MOBILE(dev))
		i82801ix_configure_cstates(dev);

	/* Initialize the real time clock. */
	i82801ix_rtc_init(dev);

	/* Initialize ISA DMA. */
	isa_dma_init();

	/* Initialize the High Precision Event Timers, if present. */
	enable_hpet();

	/* Initialize Clock Gating */
	enable_clock_gating();

	setup_i8259();

	/* The OS should do this? */
	/* Interrupt 9 should be level triggered (SCI) */
	i8259_configure_irq_trigger(9, 1);

#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
	i82801ix_lock_smm(dev);
#endif
}

static void i82801ix_lpc_read_resources(struct device *dev)
{
	/*
	 *             I/O Resources
	 *
	 * 0x0000 - 0x000f....ISA DMA
	 * 0x0010 - 0x001f....ISA DMA aliases
	 * 0x0020 ~ 0x003d....PIC
	 * 0x002e - 0x002f....Maybe Super I/O
	 * 0x0040 - 0x0043....Timer
	 * 0x004e - 0x004f....Maybe Super I/O
	 * 0x0050 - 0x0053....Timer aliases
	 * 0x0061.............NMI_SC
	 * 0x0070.............NMI_EN (readable in alternative access mode)
	 * 0x0070 - 0x0077....RTC
	 * 0x0080 - 0x008f....ISA DMA
	 * 0x0090 ~ 0x009f....ISA DMA aliases
	 * 0x0092.............Fast A20 and Init
	 * 0x00a0 ~ 0x00bd....PIC
	 * 0x00b2 - 0x00b3....APM
	 * 0x00c0 ~ 0x00de....ISA DMA
	 * 0x00c1 ~ 0x00df....ISA DMA aliases
	 * 0x00f0.............Coprocessor Error
	 * (0x0400-0x041f)....SMBus (SMBUS_IO_BASE, during raminit)
	 * 0x04d0 - 0x04d1....PIC
	 * 0x0500 - 0x057f....PM (DEFAULT_PMBASE)
	 * 0x0580 - 0x05bf....SB GPIO (DEFAULT_GPIOBASE)
	 * 0x05c0 - 0x05ff....SB GPIO cont. (mobile only)
	 * 0x0cf8 - 0x0cff....PCI
	 * 0x0cf9.............Reset Control
	 */

	struct resource *res;

	/* Get the normal PCI resources of this device. */
	pci_dev_read_resources(dev);

	/* Add an extra subtractive resource for both memory and I/O. */
	res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
	res->base = 0;
	res->size = 0x1000;
	res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;

	res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
	res->base = 0xff800000;
	res->size = 0x00800000; /* 8 MB for flash */
	res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;

	res = new_resource(dev, 3); /* IOAPIC */
	res->base = IO_APIC_ADDR;
	res->size = 0x00001000;
	res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}

static void set_subsystem(struct device *dev, unsigned vendor, unsigned device)
{
	if (!vendor || !device) {
		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
				pci_read_config32(dev, PCI_VENDOR_ID));
	} else {
		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
				((device & 0xffff) << 16) | (vendor & 0xffff));
	}
}

static void southbridge_inject_dsdt(struct device *dev)
{
	global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof(*gnvs));

	if (gnvs) {
		const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info();
		memset(gnvs, 0, sizeof(*gnvs));
		acpi_create_gnvs(gnvs);

		gnvs->ndid = gfx->ndid;
		memcpy(gnvs->did, gfx->did, sizeof(gnvs->did));

		/* And tell SMI about it */
		smm_setup_structures(gnvs, NULL, NULL);

		/* Add it to SSDT.  */
		acpigen_write_scope("\\");
		acpigen_write_name_dword("NVSA", (uintptr_t)gnvs);
		acpigen_pop_len();
	}
}


static const char *lpc_acpi_name(const struct device *dev)
{
	return "LPCB";
}

static void southbridge_fill_ssdt(struct device *device)
{
	struct device *dev = dev_find_slot(0, PCI_DEVFN(0x1f,0));
	config_t *chip = dev->chip_info;

	intel_acpi_pcie_hotplug_generator(chip->pcie_hotplug_map, 8);
	intel_acpi_gen_def_acpi_pirq(device);
}

static struct pci_operations pci_ops = {
	.set_subsystem = set_subsystem,
};

static struct device_operations device_ops = {
	.read_resources		= i82801ix_lpc_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= pci_dev_enable_resources,
	.acpi_inject_dsdt_generator = southbridge_inject_dsdt,
	.write_acpi_tables      = acpi_write_hpet,
	.acpi_fill_ssdt_generator = southbridge_fill_ssdt,
	.acpi_name		= lpc_acpi_name,
	.init			= lpc_init,
	.scan_bus		= scan_lpc_bus,
	.ops_pci		= &pci_ops,
};

static const unsigned short pci_device_ids[] = {
	0x2912, /* ICH9DH  */
	0x2914, /* ICH9DO  */
	0x2916, /* ICH9R   */
	0x2918, /* ICH9    */
	0x2917, /* ICH9M-E */
	0x2919, /* ICH9M   */
	0
};

static const struct pci_driver ich9_lpc __pci_driver = {
	.ops		= &device_ops,
	.vendor		= PCI_VENDOR_ID_INTEL,
	.devices	= pci_device_ids,
};