1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Seems the link and width of HT link needs to be setup too, you need to
* generate PCI reset or LDTSTOP to apply.
*/
#include <stdlib.h>
#include <cbmem.h>
#include <arch/io.h>
#include "k8t890.h"
/* The 256 bytes of NVRAM for S3 storage, 256B aligned */
#define K8T890_NVRAM_IO_BASE 0xf00
#define K8T890_MULTIPLE_FN_EN 0x4f
/* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */
static u8 ldtreg[3] = {0x86, 0xa6, 0xc6};
/* This functions sets KT890 link frequency and width to same values as
* it has been setup on K8 side, by AMD NB init.
*/
u8 k8t890_early_setup_ht(void)
{
u8 awidth, afreq, cldtfreq, reg;
u8 cldtwidth_in, cldtwidth_out, vldtwidth_in, vldtwidth_out, ldtnr, width;
u16 vldtcaps;
/* hack, enable NVRAM in chipset */
pci_write_config8(PCI_DEV(0, 0x0, 0), K8T890_MULTIPLE_FN_EN, 0x01);
/*
* NVRAM I/O base at K8T890_NVRAM_IO_BASE
*/
pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa2, (K8T890_NVRAM_IO_BASE >> 8));
reg = pci_read_config8(PCI_DEV(0, 0x0, 2), 0xa1);
reg |= 0x1;
pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa1, reg);
/* check if connected non coherent, initcomplete (find the SB on K8 side) */
ldtnr = 0;
if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0x98)) {
ldtnr = 0;
} else if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0xb8)) {
ldtnr = 1;
} else if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0xd8)) {
ldtnr = 2;
}
print_debug("K8T890 found at LDT ");
print_debug_hex8(ldtnr);
/* get the maximum widths for both sides */
cldtwidth_in = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) & 0x7;
cldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) >> 4) & 0x7;
vldtwidth_in = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x66) & 0x7;
vldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x0, 0), 0x66) >> 4) & 0x7;
width = MIN(MIN(MIN(cldtwidth_out, cldtwidth_in), vldtwidth_out), vldtwidth_in);
print_debug(" Agreed on width: ");
print_debug_hex8(width);
awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x67);
/* Update the desired HT LNK to match AMD NB max from VIA NB is 0x1 */
width = (width == 0x01) ? 0x11 : 0x00;
pci_write_config8(PCI_DEV(0, 0x0, 0), 0x67, width);
/* Get programmed HT freq at base 0x89 */
cldtfreq = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr] + 3) & 0xf;
print_debug(" CPU programmed to HT freq: ");
print_debug_hex8(cldtfreq);
print_debug(" VIA HT caps: ");
vldtcaps = pci_read_config16(PCI_DEV(0, 0, 0), 0x6e);
print_debug_hex16(vldtcaps);
if (!(vldtcaps & (1 << cldtfreq ))) {
die("Chipset does not support desired HT frequency\n");
}
afreq = pci_read_config8(PCI_DEV(0, 0x0, 0), 0x6d);
pci_write_config8(PCI_DEV(0, 0x0, 0), 0x6d, cldtfreq);
print_debug("\n");
/* no reset needed */
if ((width == awidth) && (afreq == cldtfreq)) {
return 0;
}
return 1;
}
static inline int s3_save_nvram_early(u32 dword, int size, int nvram_pos)
{
printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos);
switch (size) {
case 1:
outb((dword & 0xff), K8T890_NVRAM_IO_BASE+nvram_pos);
nvram_pos +=1;
break;
case 2:
outw((dword & 0xffff), K8T890_NVRAM_IO_BASE+nvram_pos);
nvram_pos +=2;
break;
default:
outl(dword, K8T890_NVRAM_IO_BASE+nvram_pos);
nvram_pos +=4;
break;
}
return nvram_pos;
}
static inline int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos)
{
switch (size) {
case 1:
*old_dword &= ~0xff;
*old_dword |= inb(K8T890_NVRAM_IO_BASE+nvram_pos);
nvram_pos +=1;
break;
case 2:
*old_dword &= ~0xffff;
*old_dword |= inw(K8T890_NVRAM_IO_BASE+nvram_pos);
nvram_pos +=2;
break;
default:
*old_dword = inl(K8T890_NVRAM_IO_BASE+nvram_pos);
nvram_pos +=4;
break;
}
printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n", * old_dword, size, nvram_pos-size);
return nvram_pos;
}
/* this should be a function
struct cbmem_entry *get_cbmem_toc(void) {
*/
#define get_cbmem_toc() ((struct cbmem_entry *) inl(K8T890_NVRAM_IO_BASE+K8T890_NVRAM_CBMEM_TOC))
|
