summaryrefslogtreecommitdiff
path: root/src/southbridge/via/vt8237r/early_smbus.c
blob: a298e84676282e669d8ed24f2cc351ef6cef9128 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com>
 * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <device/pci_ids.h>
#include <spd.h>
#include <stdlib.h>
#include "vt8237r.h"

/**
 * Print an error, should it occur. If no error, just exit.
 *
 * @param host_status The data returned on the host status register after
 *		      a transaction is processed.
 * @param loops The number of times a transaction was attempted.
 */
static void smbus_print_error(u8 host_status, int loops)
{
	/* Check if there actually was an error. */
	if ((host_status == 0x00 || host_status == 0x40 ||
	     host_status == 0x42) && (loops < SMBUS_TIMEOUT))
		return;

	if (loops >= SMBUS_TIMEOUT)
		print_err("SMBus timeout\n");
	if (host_status & (1 << 4))
		print_err("Interrupt/SMI# was Failed Bus Transaction\n");
	if (host_status & (1 << 3))
		print_err("Bus error\n");
	if (host_status & (1 << 2))
		print_err("Device error\n");
	if (host_status & (1 << 1))
		print_debug("Interrupt/SMI# completed successfully\n");
	if (host_status & (1 << 0))
		print_err("Host busy\n");
}

/**
 * Wait for the SMBus to become ready to process the next transaction.
 */
static void smbus_wait_until_ready(void)
{
	int loops;

	PRINT_DEBUG("Waiting until SMBus ready\n");

	/* Loop up to SMBUS_TIMEOUT times, waiting for bit 0 of the
	 * SMBus Host Status register to go to 0, indicating the operation
	 * was completed successfully. I don't remember why I did it this way,
	 * but I think it was because ROMCC was running low on registers */
	loops = 0;
	while ((inb(SMBHSTSTAT) & 1) == 1 && loops < SMBUS_TIMEOUT)
		++loops;

	smbus_print_error(inb(SMBHSTSTAT), loops);
}

/**
 * Reset and take ownership of the SMBus.
 */
static void smbus_reset(void)
{
	outb(HOST_RESET, SMBHSTSTAT);

	/* Datasheet says we have to read it to take ownership of SMBus. */
	inb(SMBHSTSTAT);

	PRINT_DEBUG("After reset status: ");
	PRINT_DEBUG_HEX16(inb(SMBHSTSTAT));
	PRINT_DEBUG("\n");
}

/**
 * Read a byte from the SMBus.
 *
 * @param dimm The address location of the DIMM on the SMBus.
 * @param offset The offset the data is located at.
 */
u8 smbus_read_byte(u8 dimm, u8 offset)
{
	u8 val;

	PRINT_DEBUG("DIMM ");
	PRINT_DEBUG_HEX16(dimm);
	PRINT_DEBUG(" OFFSET ");
	PRINT_DEBUG_HEX16(offset);
	PRINT_DEBUG("\n");

	smbus_reset();

	/* Clear host data port. */
	outb(0x00, SMBHSTDAT0);
	SMBUS_DELAY();
	smbus_wait_until_ready();

	/* Actual addr to reg format. */
	dimm = (dimm << 1);
	dimm |= 1;
	outb(dimm, SMBXMITADD);
	outb(offset, SMBHSTCMD);

	/* Start transaction, byte data read. */
	outb(0x48, SMBHSTCTL);
	SMBUS_DELAY();
	smbus_wait_until_ready();

	val = inb(SMBHSTDAT0);
	PRINT_DEBUG("Read: ");
	PRINT_DEBUG_HEX16(val);
	PRINT_DEBUG("\n");

	/* Probably don't have to do this, but it can't hurt. */
	smbus_reset();

	return val;
}

#define PSONREADY_TIMEOUT 0x7fffffff

static device_t get_vt8237_lpc(void)
{
	device_t dev;

	/* Power management controller */
	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
				       PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
	if (dev != PCI_DEV_INVALID)
		return dev;

	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
				PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
	if (dev != PCI_DEV_INVALID)
		return dev;

	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
				PCI_DEVICE_ID_VIA_VT8237A_LPC), 0);
	return dev;
}

/**
 * Enable the SMBus on VT8237R-based systems.
 */
void enable_smbus(void)
{
	device_t dev;
	int loops;

	/* Power management controller */
	dev = get_vt8237_lpc();
	if (dev == PCI_DEV_INVALID)
		die("Power management controller not found\n");

	/* Make sure the RTC power well is up before touching smbus. */
	loops = 0;
	while (!(pci_read_config8(dev, VT8237R_PSON) & (1<<6))
	       && loops < PSONREADY_TIMEOUT)
		++loops;

	/*
	 * 7 = SMBus Clock from RTC 32.768KHz
	 * 5 = Internal PLL reset from susp
	 */
	pci_write_config8(dev, VT8237R_POWER_WELL, 0xa0);

	/* Enable SMBus. */
	pci_write_config16(dev, VT8237R_SMBUS_IO_BASE_REG,
			   VT8237R_SMBUS_IO_BASE | 0x1);

	/* SMBus Host Configuration, enable. */
	pci_write_config8(dev, VT8237R_SMBUS_HOST_CONF, 0x01);

	/* Make it work for I/O. */
	pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);

	smbus_reset();

	/* Reset the internal pointer. */
	inb(SMBHSTCTL);
}

/**
 * A fixup for some systems that need time for the SMBus to "warm up". This is
 * needed on some VT823x based systems, where the SMBus spurts out bad data for
 * a short time after power on. This has been seen on the VIA Epia series and
 * Jetway J7F2-series. It reads the ID byte from SMBus, looking for
 * known-good data from a slot/address. Exits on either good data or a timeout.
 *
 * TODO: This should probably go into some global file, but one would need to
 *       be created just for it. If some other chip needs/wants it, we can
 *       worry about it then.
 *
 * @param ctrl The memory controller and SMBus addresses.
 */
void smbus_fixup(const struct mem_controller *ctrl)
{
	int i, ram_slots, current_slot = 0;
	u8 result = 0;

	ram_slots = ARRAY_SIZE(ctrl->channel0);
	if (!ram_slots) {
		print_err("smbus_fixup() thinks there are no RAM slots!\n");
		return;
	}

	PRINT_DEBUG("Waiting for SMBus to warm up");

	/*
	 * Bad SPD data should be either 0 or 0xff, but YMMV. So we look for
	 * the ID bytes of SDRAM, DDR, DDR2, and DDR3 (and anything in between).
	 * VT8237R has only been seen on DDR and DDR2 based systems, so far.
	 */
	for (i = 0; (i < SMBUS_TIMEOUT && ((result < SPD_MEMORY_TYPE_SDRAM) ||
	   (result > SPD_MEMORY_TYPE_SDRAM_DDR3))); i++) {

		if (current_slot > ram_slots)
			current_slot = 0;

		result = smbus_read_byte(ctrl->channel0[current_slot],
					 SPD_MEMORY_TYPE);
		current_slot++;
		PRINT_DEBUG(".");
	}

	if (i >= SMBUS_TIMEOUT)
		print_err("SMBus timed out while warming up\n");
	else
		PRINT_DEBUG("Done\n");
}

/* FIXME: Better separate the NB and SB, will be done once it works. */

void vt8237_sb_enable_fid_vid(void)
{
	device_t dev, devctl;
	u16 devid;

	/* Power management controller */
	dev = get_vt8237_lpc();
	if (dev == PCI_DEV_INVALID)
		return;

	devid = pci_read_config16(dev, PCI_DEVICE_ID);

	/* generic setup */

	/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
	pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);

	/* Enable ACPI accessm RTC signal gated with PSON. */
	pci_write_config8(dev, 0x81, 0x84);

	/* chipset-specific parts */

	/* VLINK: FIXME: can we drop the devid check and just look for the VLINK device? */
	if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC ||
	    devid == PCI_DEVICE_ID_VIA_VT8237A_LPC) {
		devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
					   PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);

		if (devctl != PCI_DEV_INVALID) {
			/* So the chip knows we are on AMD. */
			pci_write_config8(devctl, 0x7c, 0x7f);
		}
	}

	if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC) {
		/*
		 * Allow SLP# signal to assert LDTSTOP_L.
		 * Will work for C3 and for FID/VID change.
		 */

		outb(0xff, VT8237R_ACPI_IO_BASE + 0x50);

		/* Reduce further the STPCLK/LDTSTP signal to 5us. */
		pci_write_config8(dev, 0xec, 0x4);

		return;
	}

	/* VT8237R and VT8237A */

	/*
	 * Allow SLP# signal to assert LDTSTOP_L.
	 * Will work for C3 and for FID/VID change.
	 */
	outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
}

void enable_rom_decode(void)
{
	device_t dev;

	/* Power management controller */
	dev = get_vt8237_lpc();
	if (dev == PCI_DEV_INVALID)
		return;

	/* ROM decode last 1MB FFC00000 - FFFFFFFF. */
	pci_write_config8(dev, 0x41, 0x7f);
}

#if CONFIG_HAVE_ACPI_RESUME == 1
static int acpi_is_wakeup_early(void) {
	device_t dev;
	u16 tmp;

	print_debug("IN TEST WAKEUP\n");

	/* Power management controller */
	dev = get_vt8237_lpc();
	if (dev == PCI_DEV_INVALID)
		die("Power management controller not found\n");

	/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
	pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);

	/* Enable ACPI accessm RTC signal gated with PSON. */
	pci_write_config8(dev, 0x81, 0x84);

	tmp = inw(VT8237R_ACPI_IO_BASE + 0x04);

	print_debug_hex8(tmp);
	return ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0 ;
}
#endif

#if defined(__GNUC__)
void vt8237_early_spi_init(void)
{
	device_t dev;
	volatile u16 *spireg;
	u32 tmp;

	/* Bus Control and Power Management */
	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
				       PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);

	if (dev == PCI_DEV_INVALID)
		die("SB not found\n");

	/* Put SPI base 20 d0 fe. */
	tmp = pci_read_config32(dev, 0xbc);
	pci_write_config32(dev, 0xbc,
			   (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));

	/* Set SPI clock to 33MHz. */
	spireg = (u16 *) (VT8237S_SPI_MEM_BASE + 0x6c);
	(*spireg) &= 0xff00;
}
#endif

/* This #if is special. ROMCC chokes on the (rom == NULL) comparison.
 * Since the whole function is only called for one target and that target
 * is compiled with GCC, hide the function from ROMCC and be happy.
 */
#if defined(__GNUC__)
/*
 * Offset 0x58:
 * 31:20 	reserved
 * 19:16	4 bit position in shadow EEPROM
 * 15:0		data to write
 *
 * Offset 0x5c:
 * 31:28	reserved
 * 27 		ERDBG - enable read from 0x5c
 * 26		reserved
 * 25		SEELD
 * 24		SEEPR - write 1 when done updating, wait until SEELD is
 * 			set to 1, sticky
 *		cleared by reset, if it is 1 writing is disabled
 * 19:16	4 bit position in shadow EEPROM
 * 15:0		data from shadow EEPROM
 *
 * After PCIRESET SEELD and SEEPR must be 1 and 1.
 */

/* 1 = needs PCI reset, 0 don't reset, network initialized. */

/* FIXME: Maybe close the debug register after use? */

#define LAN_TIMEOUT 0x7FFFFFFF

int vt8237_early_network_init(struct vt8237_network_rom *rom)
{
	struct vt8237_network_rom n;
	int i, loops;
	device_t dev;
	u32 tmp;
	u8 status;
	u16 *rom_write;
	unsigned int checksum;

	/* Network adapter */
	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
				       PCI_DEVICE_ID_VIA_8233_7), 0);
	if (dev == PCI_DEV_INVALID) {
		print_err("Network is disabled, please enable\n");
		return 0;
	}

	tmp = pci_read_config32(dev, 0x5c);
	tmp |= 0x08000000;	/* Enable ERDBG. */
	pci_write_config32(dev, 0x5c, tmp);

	status = ((pci_read_config32(dev, 0x5c) >> 24) & 0x3);

	/* Network controller OK, EEPROM loaded. */
	if (status == 3)
		return 0;

	if (rom == NULL) {
		print_err("No config data specified, using default MAC!\n");
		n.mac_address[0] = 0x0;
		n.mac_address[1] = 0x0;
		n.mac_address[2] = 0xde;
		n.mac_address[3] = 0xad;
		n.mac_address[4] = 0xbe;
		n.mac_address[5] = 0xef;
		n.phy_addr = 0x1;
		n.res1 = 0x0;
		n.sub_sid = 0x102;
		n.sub_vid = 0x1106;
		n.pid = 0x3065;
		n.vid = 0x1106;
		n.pmcc = 0x1f;
		n.data_sel = 0x10;
		n.pmu_data_reg = 0x0;
		n.aux_curr = 0x0;
		n.reserved = 0x0;
		n.min_gnt = 0x3;
		n.max_lat = 0x8;
		n.bcr0 = 0x9;
		n.bcr1 = 0xe;
		n.cfg_a = 0x3;
		n.cfg_b = 0x0;
		n.cfg_c = 0x40;
		n.cfg_d = 0x82;
		n.checksum = 0x0;
		rom = &n;
	}

	rom_write = (u16 *) rom;
	checksum = 0;
	/* Write all data except checksum and second to last byte. */
	tmp &= 0xff000000;	/* Leave reserved bits in. */
	for (i = 0; i < 15; i++) {
		pci_write_config32(dev, 0x58, tmp | (i << 16) | rom_write[i]);
		/* Lame code FIXME */
		checksum += rom_write[i] & 0xff;
		/* checksum %= 256; */
		checksum += (rom_write[i] >> 8) & 0xff;
		/* checksum %= 256; */
	}

	checksum += (rom_write[15] & 0xff);
	checksum = ~(checksum & 0xff);
	tmp |= (((checksum & 0xff) << 8) | rom_write[15]);

	/* Write last byte and checksum. */
	pci_write_config32(dev, 0x58, (15 << 16) | tmp);

	tmp = pci_read_config32(dev, 0x5c);
	pci_write_config32(dev, 0x5c, tmp | 0x01000000); /* Toggle SEEPR. */

	/* Yes, this is a mess, but it's the easiest way to do it. */
	/* XXX not so messy, but an explanation of the hack would have been better */
	loops = 0;
	while ((((pci_read_config32(dev, 0x5c) >> 25) & 1) == 0)
	       && (loops < LAN_TIMEOUT)) {
		++loops;
	}

	if (loops >= LAN_TIMEOUT) {
		print_err("Timeout - LAN controller didn't accept config\n");
		return 0;
	}

	/* We are done, config will be used after PCIRST#. */
	return 1;
}
#endif