1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Based on other VIA SB code. */
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <console/console.h>
#include "vt8237r.h"
#include "chip.h"
/**
* No native mode. Interrupts from unconnected HDDs might occur if
* IRQ14/15 is used for PCI. Therefore no native mode support.
*/
static void ide_init(struct device *dev)
{
struct southbridge_via_vt8237r_config *sb =
(struct southbridge_via_vt8237r_config *)dev->chip_info;
u8 enables, reg8;
u32 cablesel;
device_t lpc_dev;
int i, j;
printk_info("%s IDE interface %s\n", "Primary",
sb->ide0_enable ? "enabled" : "disabled");
printk_info("%s IDE interface %s\n", "Secondary",
sb->ide1_enable ? "enabled" : "disabled");
enables = pci_read_config8(dev, IDE_CS) & ~0x3;
enables |= (sb->ide0_enable << 1) | sb->ide1_enable;
pci_write_config8(dev, IDE_CS, enables);
enables = pci_read_config8(dev, IDE_CS);
printk_debug("Enables in reg 0x40 read back as 0x%x\n", enables);
/* Enable only compatibility mode. */
enables = pci_read_config8(dev, 0x09);
enables &= 0xFA;
pci_write_config8(dev, 0x09, enables);
enables = pci_read_config8(dev, IDE_CONF_II);
enables &= ~0xc0;
pci_write_config8(dev, IDE_CONF_II, enables);
enables = pci_read_config8(dev, IDE_CONF_II);
printk_debug("Enables in reg 0x42 read back as 0x%x\n", enables);
/* Enable prefetch buffers. */
enables = pci_read_config8(dev, IDE_CONF_I);
enables |= 0xf0;
pci_write_config8(dev, IDE_CONF_I, enables);
/* Flush FIFOs at half. */
enables = pci_read_config8(dev, IDE_CONF_FIFO);
enables &= 0xf0;
enables |= (1 << 2) | (1 << 0);
pci_write_config8(dev, IDE_CONF_FIFO, enables);
/* PIO read prefetch counter, Bus Master IDE Status Reg. Read Retry. */
enables = pci_read_config8(dev, IDE_MISC_I);
enables &= 0xe2;
enables |= (1 << 4) | (1 << 3);
pci_write_config8(dev, IDE_MISC_I, enables);
/* Use memory read multiple, Memory-Write-and-Invalidate. */
enables = pci_read_config8(dev, IDE_MISC_II);
enables &= 0xEF;
enables |= (1 << 2) | (1 << 3);
pci_write_config8(dev, IDE_MISC_II, enables);
/* Force interrupts to use compat mode. */
pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x0);
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0xff);
/* Cable guy... */
cablesel = pci_read_config32(dev, IDE_UDMA);
cablesel &= ~((1 << 28) | (1 << 20) | (1 << 12) | (1 << 4));
cablesel |= (sb->ide0_80pin_cable << 28) |
(sb->ide0_80pin_cable << 20) |
(sb->ide1_80pin_cable << 12) |
(sb->ide1_80pin_cable << 4);
pci_write_config32(dev, IDE_UDMA, cablesel);
#if CONFIG_EPIA_VT8237R_INIT
/* Set PATA Output Drive Strength */
lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237R_LPC, 0);
if (lpc_dev)
pci_write_config8(lpc_dev, 0x7C, 0x20);
#endif
}
static const struct device_operations ide_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = ide_init,
.enable = 0,
.ops_pci = 0,
};
static const struct pci_driver northbridge_driver __pci_driver = {
.ops = &ide_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_82C586_1,
};
|
