summaryrefslogtreecommitdiff
path: root/src/superio/ite/it8712f/early_serial.c
blob: ebc8e0a7f1dea753182250dde7783d81f862b68e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <arch/romcc_io.h>
#include "it8712f.h"

/* The base address is 0x2e or 0x4e, depending on config bytes. */
#define SIO_BASE                     0x2e
#define SIO_INDEX                    SIO_BASE
#define SIO_DATA                     (SIO_BASE + 1)

/* Global configuration registers. */
#define IT8712F_CONFIG_REG_CC        0x02 /* Configure Control (write-only). */
#define IT8712F_CONFIG_REG_LDN       0x07 /* Logical Device Number. */
#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */
#define IT8712F_CONFIG_REG_CLOCKSEL  0x23 /* Clock Selection. */
#define IT8712F_CONFIG_REG_SWSUSP    0x24 /* Software Suspend, Flash I/F. */
#define IT8712F_CONFIG_REG_MFC       0x2a /* Multi-function control */
#define IT8712F_CONFIG_REG_WATCHDOG  0x72 /* Watchdog control. */

static void it8712f_sio_write(u8 ldn, u8 index, u8 value)
{
	outb(IT8712F_CONFIG_REG_LDN, SIO_BASE);
	outb(ldn, SIO_DATA);
	outb(index, SIO_BASE);
	outb(value, SIO_DATA);
}

static void it8712f_enter_conf(void)
{
	u16 port = 0x2e; /* TODO: Don't hardcode! */

	outb(0x87, port);
	outb(0x01, port);
	outb(0x55, port);
	outb((port == 0x4e) ? 0xaa : 0x55, port);
}

static void it8712f_exit_conf(void)
{
	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
}

/* Select 24MHz CLKIN (48MHz is the default). */
void it8712f_24mhz_clkin(void)
{
	it8712f_enter_conf();
	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x1);
	it8712f_exit_conf();
}

/*
 * We need to set enable 3VSBSW#, this was documented only in IT8712F_V0.9.2!
 *
 * LDN 7, reg 0x2a - needed for S3, or memory power will be cut off.
 *
 * Enable 3VSBSW#. (For System Suspend-to-RAM)
 * 0: 3VSBSW# will be always inactive.
 * 1: 3VSBSW# enabled. It will be (NOT SUSB#) NAND SUSC#.
 */
void it8712f_enable_3vsbsw(void)
{
	it8712f_enter_conf();
	it8712f_sio_write(IT8712F_GPIO, IT8712F_CONFIG_REG_MFC, 0x80);
	it8712f_exit_conf();
}

void it8712f_kill_watchdog(void)
{
	it8712f_enter_conf();
	it8712f_sio_write(IT8712F_GPIO, IT8712F_CONFIG_REG_WATCHDOG, 0x00);
	it8712f_exit_conf();
}

/* Enable the serial port(s). */
void it8712f_enable_serial(device_t dev, u16 iobase)
{
	/* (1) Enter the configuration state (MB PnP mode). */
	it8712f_enter_conf();

	/* (2) Modify the data of configuration registers. */

	/*
	 * Select the chip to configure (if there's more than one).
	 * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
	 * If this register is not written, both chips are configured.
	 */

	/* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CONFIGSEL, 0x00); */

	/* Enable serial port(s). */
	it8712f_sio_write(IT8712F_SP1, 0x30, 0x1); /* Serial port 1 */
	it8712f_sio_write(IT8712F_SP2, 0x30, 0x1); /* Serial port 2 */

	/* Clear software suspend mode (clear bit 0). TODO: Needed? */
	/* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_SWSUSP, 0x00); */

	/* (3) Exit the configuration state (MB PnP mode). */
	it8712f_exit_conf();
}