blob: f2fd87b27eea25cfe5b85d0dd479618b6c8e984b (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* This file is part of the coreboot project. */
#ifndef SUPERIO_NUVOTON_NPCD378_H
#define SUPERIO_NUVOTON_NPCD378_H
#include <stdint.h>
/* HWM at LDN8 */
#define NPCD837_HWM_WRITE_LOCK_CTRL 0x4
#define NPCD837_HWM_WRITE_LOCK_BIT 0x1
#define NPCD378_HWM_PSU_FAN_MIN 0x17
#define NPCD378_HWM_PSU_FAN_MAX 0xf8
#define NPCD378_HWM_PSU_FAN_PWM_CTRL 0x198
/*
* Read HWM register at specific page and offset.
*
* @param iobase IOBASE address of LDN8
* @param reg MSB is page, LSB sets the offset in selected page
*
* @return Byte read from HWM
*/
uint8_t npcd378_hwm_read(const uint16_t iobase, const uint16_t reg);
/*
* Write to HWM register at specific page and offset.
*
* @param iobase IOBASE address of LDN8
* @param reg MSB is page, LSB sets the offset in selected page
* @param val The value to write to HWM register
*/
void npcd378_hwm_write(const uint16_t iobase, const uint16_t reg,
const uint8_t val);
/*
* Notify SuperIO a host-to-device transfer is ongoing.
* Has to be called before any register in HWM is written to.
*
* @param iobase IOBASE address of LDN8
*/
void npcd378_hwm_write_start(const uint16_t iobase);
/*
* Notify SuperIO a host-to-device transfer has finished.
* Has to be called after any register in HWM was written to.
*
* @param iobase IOBASE address of LDN8
*/
void npcd378_hwm_write_finished(const uint16_t iobase);
/* Logical Device Numbers (LDN). */
/* Default Nuvoton hardware: */
#define NPCD378_FDC 0x00 /* Floppy */
#define NPCD378_PP 0x01 /* Parallel port */
#define NPCD378_SP1 0x02 /* Com1 */
#define NPCD378_SP2 0x03 /* Com2 & IR */
#define NPCD378_PWR 0x04 /* LED and PWR button control */
#define NPCD378_AUX 0x05 /* PS/2 mouse */
#define NPCD378_KBC 0x06 /* PS/2 keyboard */
/* The following is guessed based on observation and might be wrong: */
#define NPCD378_WDT1 0x07
#define NPCD378_HWM 0x08 /* HWM: 16 pages with each 255 byte */
#define NPCD378_GPIO_PP_OD 0x0F /* GPIO Push-Pull/Open drain select */
#define NPCD378_I2C 0x15 /* Provides 35Khz at IOBASE + 0x9 */
#define NPCD378_SUSPEND 0x1c /* Suspend control ? */
#define NPCD378_GPIOA 0x1e
#endif /* SUPERIO_NUVOTON_NPCD378_H */
|
