1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2009 Dynon Avionics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 $
*/
#include <arch/io.h>
#include <device/device.h>
#include <device/pnp.h>
#include <console/console.h>
#include <string.h>
#include <stdint.h>
#include <stdlib.h>
#include <uart8250.h>
#include <pc80/keyboard.h>
#include "chip.h"
#include "w83627uhg.h"
static void w83627uhg_enter_ext_func_mode(device_t dev)
{
outb(0x87, dev->path.pnp.port);
outb(0x87, dev->path.pnp.port);
}
static void w83627uhg_exit_ext_func_mode(device_t dev)
{
outb(0xaa, dev->path.pnp.port);
}
/*
* Set the UART clock source.
*
* Possible UART clock source speeds are:
*
* 0 = 1.8462 MHz (default)
* 1 = 2 MHz
* 2 = 24 MHz
* 3 = 14.769 MHz
*
* The faster clocks allow for BAUD rates up to 2mbits.
*
* Warning: The kernel will need to be adjusted since it assumes
* a 1.8462 MHz clock.
*/
static void set_uart_clock_source(device_t dev, u8 uart_clock)
{
u8 value;
pnp_enter_conf_mode(dev);
pnp_set_logical_device(dev);
value = pnp_read_config(dev, 0xf0);
value &= ~0x03;
value |= (uart_clock & 0x03);
pnp_write_config(dev, 0xf0, value);
pnp_exit_conf_mode(dev);
}
static void w83627uhg_init(device_t dev)
{
struct superio_winbond_w83627uhg_config *conf = dev->chip_info;
if (!dev->enabled)
return;
switch(dev->path.pnp.device) {
case W83627UHG_SP1:
/* set_uart_clock_source(dev, 0); */
break;
case W83627UHG_SP2:
/* set_uart_clock_source(dev, 0); */
break;
case W83627UHG_SP3:
/* set_uart_clock_source(dev, 0); */
break;
case W83627UHG_SP4:
/* set_uart_clock_source(dev, 0); */
break;
case W83627UHG_SP5:
/* set_uart_clock_source(dev, 0); */
break;
case W83627UHG_SP6:
/* set_uart_clock_source(dev, 0); */
break;
case W83627UHG_KBC:
pc_keyboard_init(&conf->keyboard);
break;
}
}
static void w83627uhg_set_resources(device_t dev)
{
pnp_set_resources(dev);
}
static void w83627uhg_enable_resources(device_t dev)
{
pnp_enable_resources(dev);
}
static void w83627uhg_enable(device_t dev)
{
pnp_enable(dev);
}
static const struct pnp_mode_ops pnp_conf_mode_ops = {
.enter_conf_mode = w83627uhg_enter_ext_func_mode,
.exit_conf_mode = w83627uhg_exit_ext_func_mode,
};
static struct device_operations ops = {
.read_resources = pnp_read_resources,
.set_resources = w83627uhg_set_resources,
.enable_resources = w83627uhg_enable_resources,
.enable = w83627uhg_enable,
.init = w83627uhg_init,
.ops_pnp_mode = &pnp_conf_mode_ops,
};
static struct pnp_info pnp_dev_info[] = {
{ &ops, W83627UHG_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_SP1, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_SP2, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, {0x07ff, 0}, {0x07ff, 4}, },
{ &ops, W83627UHG_SP3, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_GPIO3_4, },
{ &ops, W83627UHG_WDTO_PLED_GPIO5_6, },
{ &ops, W83627UHG_GPIO1_2, },
{ &ops, W83627UHG_ACPI, PNP_IRQ0, },
{ &ops, W83627UHG_HWM, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, },
{ &ops, W83627UHG_PECI_SST, },
{ &ops, W83627UHG_SP4, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_SP5, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627UHG_SP6, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
};
static void enable_dev(device_t dev)
{
pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
}
struct chip_operations superio_winbond_w83627uhg_ops = {
CHIP_NAME("Winbond W83627UHG Super I/O")
.enable_dev = enable_dev,
};
|
