1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "superiotool.h"
#define DEVICE_ID_BYTE1_REG 0x20
#define DEVICE_ID_BYTE2_REG 0x21
#define DEVICE_REV_REG 0x1f
const static struct superio_registers reg_table[] = {
/* TODO: M5113 doesn't seem to have ID registers? */
{0x5315, "M1535/M1535D/M1535+/M1535D+", {
{NOLDN, NULL,
{0x07,0x1f,0x20,0x21,0x22,0x23,0x2c,0x2d,0x2e,EOT},
{NANA,NANA,0x53,0x15,0x00,0x00,RSVD,RSVD,RSVD,EOT}},
{0x0, "Floppy",
{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,EOT},
{0x00,0x03,0xf0,0x06,0x02,0x08,0x00,0xff,0x00,EOT}},
{0x3, "Parallel port",
{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT},
{0x00,0x03,0x78,0x05,0x04,0x8c,0xc5,EOT}},
{0x4, "COM1",
{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
{0x00,0x03,0xf8,0x04,0x00,0x00,0x0c,EOT}},
{0x5, "COM2",
{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,EOT},
{0x00,0x03,0xe8,0x09,0x04,0x80,0x00,0x0c,EOT}},
{0x7, "Keyboard",
{0x30,0x70,0x72,0xf0,EOT},
{NANA,0x01,0x00,0x00,EOT}},
{0x8, "COM3",
{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
{0x00,0x02,0xf8,0x03,0x00,0x00,0x0c,EOT}},
{0xc, "Hotkey",
{0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,EOT},
{0x00,0x35,0x14,0x11,0x71,RSVD,0x05,EOT}},
{EOT}}},
{EOT}
};
static void enter_conf_mode_ali(uint16_t port)
{
outb(0x51, port);
outb(0x23, port);
}
static void exit_conf_mode_ali(uint16_t port)
{
outb(0xbb, port);
}
void probe_idregs_ali(uint16_t port)
{
uint16_t id;
uint8_t rev;
enter_conf_mode_ali(port);
id = regval(port, DEVICE_ID_BYTE1_REG) << 8;
id |= regval(port, DEVICE_ID_BYTE2_REG);
rev = regval(port, DEVICE_REV_REG);
if (superio_unknown(reg_table, id)) {
no_superio_found(port);
exit_conf_mode_ali(port);
return;
}
printf("Found ALi %s (id=0x%04x, rev=0x%02x) at 0x%x\n",
get_superio_name(reg_table, id), id, rev, port);
dump_superio("ALi", reg_table, port, id);
dump_superio_readable(port); /* TODO */
exit_conf_mode_ali(port);
}
|
