ArmPlatformPkg/SP804Timer: Remove the SP810 System Controller dependency

The SP804 drivers must not consider the presence of the SP810 System Controller
on the platform. The SP810 was used to enable the SP804 Dual Timers on ArmVExpress.
It is the role of the Platform specific driver to enable to the SP804 dual timers
if required.

The former SP810 initialization code has moved to ArmPlatformLib for ArmRealViewEb
and ArmVersatileExpress.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11744 6f19259b-4bc3-4df7-8a09-765794883524

4 files changed, 51 insertions, 46 deletions

diff --git a/ArmPlatformPkg/ArmRealViewEbPkg/Library/ArmRealViewEbLibRTSM/ArmRealViewEb.c b/ArmPlatformPkg/ArmRealViewEbPkg/Library/ArmRealViewEbLibRTSM/ArmRealViewEb.c
index 8be95ce38f..8a1446a81d 100644
--- a/ArmPlatformPkg/ArmRealViewEbPkg/Library/ArmRealViewEbLibRTSM/ArmRealViewEb.c
+++ b/ArmPlatformPkg/ArmRealViewEbPkg/Library/ArmRealViewEbLibRTSM/ArmRealViewEb.c
@@ -16,7 +16,9 @@
 #include <Library/ArmPlatformLib.h>
 #include <Library/DebugLib.h>
 #include <Library/PcdLib.h>
+
 #include <Drivers/PL341Dmc.h>
+#include <Drivers/SP804Timer.h>
 
 /**
   Return if Trustzone is supported by your platform
@@ -109,7 +111,14 @@ ArmPlatformNormalInitialize (
   VOID
   )
 {
-  // Nothing to do here
+  // Configure periodic timer (TIMER0) for 1MHz operation
+  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
+  // Configure 1MHz clock
+  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
+  // configure SP810 to use 1MHz clock and disable
+  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
+  // Configure SP810 to use 1MHz clock and disable
+  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
 }
 
 /**
diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/CTA9x4.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/CTA9x4.c
index c2783bbca2..3acb713f3a 100644
--- a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/CTA9x4.c
+++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/CTA9x4.c
@@ -17,10 +17,12 @@
 #include <Library/ArmPlatformLib.h>
 #include <Library/DebugLib.h>
 #include <Library/PcdLib.h>
+#include <Library/SerialPortLib.h>
+
 #include <Drivers/PL341Dmc.h>
 #include <Drivers/PL301Axi.h>
 #include <Drivers/PL310L2Cache.h>
-#include <Library/SerialPortLib.h>
+#include <Drivers/SP804Timer.h>
 
 #define SerialPrint(txt)  SerialPortWrite (txt, AsciiStrLen(txt)+1);
 
@@ -212,7 +214,14 @@ ArmPlatformNormalInitialize (
   VOID
   )
 {
-  // Nothing to do here
+  // Configure periodic timer (TIMER0) for 1MHz operation
+  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
+  // Configure 1MHz clock
+  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
+  // configure SP810 to use 1MHz clock and disable
+  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
+  // Configure SP810 to use 1MHz clock and disable
+  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
 }
 
 /**
diff --git a/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c b/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c
index a28a045352..c7fb50dd0e 100644
--- a/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c
+++ b/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c
@@ -211,9 +211,9 @@ TimerDriverSetTimerPeriod (
   MmioAnd32 (SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, ~SP804_TIMER_CTRL_ENABLE);
 
   if (TimerPeriod == 0) {
-    // leave timer disabled from above, and...
+    // Leave timer disabled from above, and...
 
-    // disable timer 0/1 interrupt for a TimerPeriod of 0
+    // Disable timer 0/1 interrupt for a TimerPeriod of 0
     Status = gInterrupt->DisableInterruptSource (gInterrupt, gVector);    
   } else {  
     // Convert TimerPeriod into 1MHz clock counts (us units = 100ns units / 10)
@@ -364,16 +364,13 @@ TimerInitialize (
   Status = gBS->LocateProtocol (&gHardwareInterruptProtocolGuid, NULL, (VOID **)&gInterrupt);
   ASSERT_EFI_ERROR (Status);
 
-  // Configure 1MHz clock
-  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
-
-  // configure timer 1 for free running operation, 32 bits, no prescaler, interrupt disabled
+  // Configure timer 1 for free running operation, 32 bits, no prescaler, interrupt disabled
   MmioWrite32 (SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
 
-  // enable the free running timer
+  // Enable the free running timer
   MmioOr32 (SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
 
-  // record free running tick value (should be close to 0xffffffff)
+  // Record free running tick value (should be close to 0xffffffff)
   mLastTickCount = MmioRead32 (SP804_TIMER1_BASE + SP804_TIMER_CURRENT_REG);
 
   // Disable the timer
@@ -385,9 +382,6 @@ TimerInitialize (
   Status = gInterrupt->RegisterInterruptSource (gInterrupt, gVector, TimerInterruptHandler);
   ASSERT_EFI_ERROR (Status);
 
-  // configure periodic timer (TIMER0) for 1MHz operation
-  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
-
   // configure timer 0 for periodic operation, 32 bits, no prescaler, and interrupt enabled
   MmioWrite32 (SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_PERIODIC | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1 | SP804_TIMER_CTRL_INT_ENABLE);
 
diff --git a/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c b/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c
index 18be5805d8..96c43aa042 100644
--- a/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c
+++ b/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c
@@ -30,38 +30,32 @@ TimerConstructor (
   VOID
   )
 {
-    // Check if Timer 2 is already initialized
-    if (MmioRead32(SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
-        return RETURN_SUCCESS;
-    } else {
-        // configure SP810 to use 1MHz clock and disable
-        MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
-
-        // configure timer 2 for one shot operation, 32 bits, no prescaler, and interrupt disabled
-        MmioOr32 (SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ONESHOT | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
-
-        // preload the timer count register
-        MmioWrite32 (SP804_TIMER2_BASE + SP804_TIMER_LOAD_REG, 1);
+  // Check if Timer 2 is already initialized
+  if (MmioRead32(SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
+    return RETURN_SUCCESS;
+  } else {
+    // Configure timer 2 for one shot operation, 32 bits, no prescaler, and interrupt disabled
+    MmioOr32 (SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ONESHOT | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
 
-        // enable the timer
-        MmioOr32 (SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
-    }
+    // Preload the timer count register
+    MmioWrite32 (SP804_TIMER2_BASE + SP804_TIMER_LOAD_REG, 1);
 
-    // Check if Timer 3 is already initialized
-    if (MmioRead32(SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
-        return RETURN_SUCCESS;
-    } else {
-        // configure SP810 to use 1MHz clock and disable
-        MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
+    // Enable the timer
+    MmioOr32 (SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
+  }
 
-        // configure timer 3 for free running operation, 32 bits, no prescaler, interrupt disabled
-        MmioOr32 (SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
+  // Check if Timer 3 is already initialized
+  if (MmioRead32(SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
+    return RETURN_SUCCESS;
+  } else {
+    // Configure timer 3 for free running operation, 32 bits, no prescaler, interrupt disabled
+    MmioOr32 (SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
 
-        // enable the timer
-        MmioOr32 (SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
-    }
+    // Enable the timer
+    MmioOr32 (SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
+  }
 
-    return RETURN_SUCCESS;
+  return RETURN_SUCCESS;
 }
 
 /**
@@ -141,11 +135,10 @@ GetPerformanceCounter (
 { 
   // Free running 64-bit/32-bit counter is needed here.
   // Don't think we need this to boot, just to do performance profile
-  // ASSERT (FALSE);
-  UINT32 val = MmioRead32 (SP804_TIMER3_BASE + SP804_TIMER_CURRENT_REG);
-  ASSERT(val > 0);
-
-  return (UINT64)val;
+  UINT64 Value;
+  Value = MmioRead32 (SP804_TIMER3_BASE + SP804_TIMER_CURRENT_REG);
+  ASSERT(Value > 0);
+  return Value;
 }