diff options
| author | Elvin Li <elvin.li@intel.com> | 2014-10-22 05:01:58 +0000 |
|---|---|---|
| committer | li-elvin <li-elvin@Edk2> | 2014-10-22 05:01:58 +0000 |
| commit | 2cb6eabe0b358fe0d4e4dd602f84b5f5d3e39a6c (patch) | |
| tree | 7aedee364f4e6563ecd54e7a98efe9cfba2db331 | |
| parent | fbb393ab7a9c33ca4ae81fb3f91a7d2a5671bd62 (diff) | |
| download | edk2-platforms-2cb6eabe0b358fe0d4e4dd602f84b5f5d3e39a6c.tar.xz | |
Add DebugCommunicationLibUsb3 for USB3.0 source level debug support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16224 6f19259b-4bc3-4df7-8a09-765794883524
11 files changed, 2867 insertions, 0 deletions
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Common.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Common.c new file mode 100644 index 0000000000..fe6aec1ca5 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Common.c @@ -0,0 +1,1236 @@ +/** @file
+ Debug Port Library implementation based on usb3 debug port.
+
+ Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugCommunicationLibUsb3Internal.h"
+
+//
+// The global variable which can be used after memory is ready.
+//
+USB3_DEBUG_PORT_HANDLE mDebugCommunicationLibUsb3DebugPortHandle;
+
+UINT16 mString0Desc[] = {
+ // String Descriptor Type + Length
+ ( USB_DESC_TYPE_STRING << 8 ) + STRING0_DESC_LEN,
+ 0x0409
+};
+
+UINT16 mManufacturerStrDesc[] = {
+ // String Descriptor Type + Length
+ ( USB_DESC_TYPE_STRING << 8 ) + MANU_DESC_LEN,
+ 'I', 'n', 't', 'e', 'l'
+};
+
+UINT16 mProductStrDesc[] = {
+ // String Descriptor Type + Length
+ ( USB_DESC_TYPE_STRING << 8 ) + PRODUCT_DESC_LEN,
+ 'U', 'S', 'B', ' ', '3', '.', '0', ' ', 'D', 'e', 'b', 'u', 'g', ' ', 'C', 'a', 'b', 'l', 'e'
+};
+
+UINT16 mSerialNumberStrDesc[] = {
+ // String Descriptor Type + Length
+ ( USB_DESC_TYPE_STRING << 8 ) + SERIAL_DESC_LEN,
+ '1'
+};
+
+/**
+ Sets bits as per the enabled bit positions in the mask.
+
+ @param[in, out] Register UINTN register
+ @param[in] BitMask 32-bit mask
+**/
+VOID
+XhcSetR32Bit(
+ IN OUT UINTN Register,
+ IN UINT32 BitMask
+ )
+{
+ UINT32 RegisterValue;
+
+ RegisterValue = MmioRead32 (Register);
+ RegisterValue |= (UINT32)(BitMask);
+ MmioWrite32 (Register, RegisterValue);
+}
+
+/**
+ Clears bits as per the enabled bit positions in the mask.
+
+ @param[in, out] Register UINTN register
+ @param[in] BitMask 32-bit mask
+**/
+VOID
+XhcClearR32Bit(
+ IN OUT UINTN Register,
+ IN UINT32 BitMask
+ )
+{
+ UINT32 RegisterValue;
+
+ RegisterValue = MmioRead32 (Register);
+ RegisterValue &= ~BitMask;
+ MmioWrite32 (Register, RegisterValue);
+}
+
+/**
+ Write the data to the XHCI debug register.
+
+ @param Handle Debug port handle.
+ @param Offset The offset of the runtime register.
+ @param Data The data to write.
+
+**/
+VOID
+XhcWriteDebugReg (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ )
+{
+ EFI_PHYSICAL_ADDRESS DebugCapabilityBase;
+
+ DebugCapabilityBase = Handle->DebugCapabilityBase;
+ MmioWrite32 ((UINTN)(DebugCapabilityBase + Offset), Data);
+
+ return;
+}
+
+/**
+ Read XHCI debug register.
+
+ @param Handle Debug port handle.
+ @param Offset The offset of the runtime register.
+
+ @return The register content read
+
+**/
+UINT32
+XhcReadDebugReg (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 Offset
+ )
+{
+ UINT32 Data;
+ EFI_PHYSICAL_ADDRESS DebugCapabilityBase;
+
+ DebugCapabilityBase = Handle->DebugCapabilityBase;
+ Data = MmioRead32 ((UINTN)(DebugCapabilityBase + Offset));
+
+ return Data;
+}
+
+/**
+ Set one bit of the runtime register while keeping other bits.
+
+ @param Handle Debug port handle.
+ @param Offset The offset of the runtime register.
+ @param Bit The bit mask of the register to set.
+
+**/
+VOID
+XhcSetDebugRegBit (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 Offset,
+ IN UINT32 Bit
+ )
+{
+ UINT32 Data;
+
+ Data = XhcReadDebugReg (Handle, Offset);
+ Data |= Bit;
+ XhcWriteDebugReg (Handle, Offset, Data);
+}
+
+/**
+ Program and eanble XHCI MMIO base address.
+
+ @return XHCI MMIO base address.
+
+**/
+EFI_PHYSICAL_ADDRESS
+ProgramXhciBaseAddress (
+ VOID
+ )
+{
+ UINT16 PciCmd;
+ UINT32 Low;
+ UINT32 High;
+ EFI_PHYSICAL_ADDRESS XhciMmioBase;
+
+ Low = PciRead32 (PcdGet32(PcdUsbXhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET);
+ High = PciRead32 (PcdGet32(PcdUsbXhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + 4);
+ XhciMmioBase = (EFI_PHYSICAL_ADDRESS) (LShiftU64 ((UINT64) High, 32) | Low);
+ XhciMmioBase &= XHCI_BASE_ADDRESS_64_BIT_MASK;
+
+ if ((XhciMmioBase == 0) || (XhciMmioBase == XHCI_BASE_ADDRESS_64_BIT_MASK)) {
+ XhciMmioBase = PcdGet64(PcdUsbXhciMemorySpaceBase);
+ PciWrite32(PcdGet32(PcdUsbXhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET, XhciMmioBase & 0xFFFFFFFF);
+ PciWrite32(PcdGet32(PcdUsbXhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + 4, (RShiftU64 (XhciMmioBase, 32) & 0xFFFFFFFF));
+ }
+
+ PciCmd = PciRead16 (PcdGet32(PcdUsbXhciPciAddress) + PCI_COMMAND_OFFSET);
+ if (((PciCmd & EFI_PCI_COMMAND_MEMORY_SPACE) == 0) || ((PciCmd & EFI_PCI_COMMAND_BUS_MASTER) == 0)) {
+ PciCmd |= EFI_PCI_COMMAND_MEMORY_SPACE | EFI_PCI_COMMAND_BUS_MASTER;
+ PciWrite16(PcdGet32(PcdUsbXhciPciAddress) + PCI_COMMAND_OFFSET, PciCmd);
+ }
+
+ return XhciMmioBase;
+}
+
+/**
+ Check if the timer is timeout.
+
+ @param[in] UsbDebugPortHandle Pointer to USB Debug port handle
+ @param[in] Timer The start timer from the begin.
+ @param[in] TimeoutTicker Ticker number need time out.
+
+ @return TRUE Timer time out occurs.
+ @retval FALSE Timer does not time out.
+
+**/
+BOOLEAN
+IsTimerTimeout (
+ IN USB3_DEBUG_PORT_HANDLE *UsbDebugPortHandle,
+ IN UINT64 Timer,
+ IN UINT64 TimeoutTicker
+ )
+{
+ UINT64 CurrentTimer;
+ UINT64 Delta;
+
+ CurrentTimer = GetPerformanceCounter ();
+
+ if (UsbDebugPortHandle->TimerCountDown) {
+ //
+ // The timer counter counts down. Check for roll over condition.
+ //
+ if (CurrentTimer < Timer) {
+ Delta = Timer - CurrentTimer;
+ } else {
+ //
+ // Handle one roll-over.
+ //
+ Delta = UsbDebugPortHandle->TimerCycle - (CurrentTimer - Timer);
+ }
+ } else {
+ //
+ // The timer counter counts up. Check for roll over condition.
+ //
+ if (CurrentTimer > Timer) {
+ Delta = CurrentTimer - Timer;
+ } else {
+ //
+ // Handle one roll-over.
+ //
+ Delta = UsbDebugPortHandle->TimerCycle - (Timer - CurrentTimer);
+ }
+ }
+
+ return (BOOLEAN) (Delta >= TimeoutTicker);
+}
+
+/**
+ Update XHC MMIO base address when MMIO base address is changed.
+
+ @param Handle Debug port handle.
+ @param XhciMmioBase XHCI MMIO base address.
+
+**/
+VOID
+UpdateXhcResource (
+ IN OUT USB3_DEBUG_PORT_HANDLE *Handle,
+ IN EFI_PHYSICAL_ADDRESS XhciMmioBase
+ )
+{
+ if ((Handle == NULL) || (Handle->XhciMmioBase == XhciMmioBase)) {
+ return;
+ }
+
+ //
+ // Need fix Handle data according to new XHCI MMIO base address.
+ //
+ Handle->XhciMmioBase = XhciMmioBase;
+ Handle->DebugCapabilityBase = XhciMmioBase + Handle->DebugCapabilityOffset;
+ Handle->XhciOpRegister = XhciMmioBase + MmioRead8 ((UINTN)XhciMmioBase);
+}
+
+/**
+ Calculate the usb debug port bar address.
+
+ @param Handle Debug port handle.
+
+ @retval RETURN_UNSUPPORTED The usb host controller does not supported usb debug port capability.
+ @retval RETURN_SUCCESS Get bar and offset successfully.
+
+**/
+RETURN_STATUS
+EFIAPI
+CalculateUsbDebugPortMmioBase (
+ USB3_DEBUG_PORT_HANDLE *Handle
+ )
+{
+ UINT16 VendorId;
+ UINT16 DeviceId;
+ UINT8 ProgInterface;
+ UINT8 SubClassCode;
+ UINT8 BaseCode;
+ BOOLEAN Flag;
+ UINT32 Capability;
+ EFI_PHYSICAL_ADDRESS CapabilityPointer;
+ UINT8 CapLength;
+
+ VendorId = PciRead16 (PcdGet32(PcdUsbXhciPciAddress) + PCI_VENDOR_ID_OFFSET);
+ DeviceId = PciRead16 (PcdGet32(PcdUsbXhciPciAddress) + PCI_DEVICE_ID_OFFSET);
+
+ if ((VendorId == 0xFFFF) || (DeviceId == 0xFFFF)) {
+ goto Done;
+ }
+
+ ProgInterface = PciRead8 (PcdGet32(PcdUsbXhciPciAddress) + PCI_CLASSCODE_OFFSET);
+ SubClassCode = PciRead8 (PcdGet32(PcdUsbXhciPciAddress) + PCI_CLASSCODE_OFFSET + 1);
+ BaseCode = PciRead8 (PcdGet32(PcdUsbXhciPciAddress) + PCI_CLASSCODE_OFFSET + 2);
+
+ if ((ProgInterface != PCI_IF_XHCI) || (SubClassCode != PCI_CLASS_SERIAL_USB) || (BaseCode != PCI_CLASS_SERIAL)) {
+ goto Done;
+ }
+
+ CapLength = MmioRead8 ((UINTN) Handle->XhciMmioBase);
+
+ //
+ // Get capability pointer from HCCPARAMS at offset 0x10
+ //
+ CapabilityPointer = Handle->XhciMmioBase + (MmioRead32 ((UINTN)(Handle->XhciMmioBase + XHC_HCCPARAMS_OFFSET)) >> 16) * 4;
+
+ //
+ // Search XHCI debug capability
+ //
+ Flag = FALSE;
+ Capability = MmioRead32 ((UINTN)CapabilityPointer);
+ while (TRUE) {
+ if ((Capability & XHC_CAPABILITY_ID_MASK) == PCI_CAPABILITY_ID_DEBUG_PORT) {
+ Flag = TRUE;
+ break;
+ }
+ if ((((Capability & XHC_NEXT_CAPABILITY_MASK) >> 8) & XHC_CAPABILITY_ID_MASK) == 0) {
+ //
+ // Reach the end of capability list, quit
+ //
+ break;
+ }
+ CapabilityPointer += ((Capability & XHC_NEXT_CAPABILITY_MASK) >> 8) * 4;
+ Capability = MmioRead32 ((UINTN)CapabilityPointer);
+ }
+
+ if (!Flag) {
+ goto Done;
+ }
+
+ //
+ // USB3 debug capability is supported.
+ //
+ Handle->DebugCapabilityBase = CapabilityPointer;
+ Handle->DebugCapabilityOffset = CapabilityPointer - Handle->XhciMmioBase;
+ Handle->XhciOpRegister = Handle->XhciMmioBase + CapLength;
+ Handle->Initialized = USB3DBG_DBG_CAB;
+ return RETURN_SUCCESS;
+
+Done:
+ Handle->Initialized = USB3DBG_NO_DBG_CAB;
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Check if it needs to re-initialize usb debug port hardware.
+
+ During different phases switch, such as SEC to PEI or PEI to DXE or DXE to SMM, we should check
+ whether the usb debug port hardware configuration is changed. Such case can be triggerred by
+ Pci bus resource allocation and so on.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE The usb debug port hardware configuration is changed.
+ @retval FALSE The usb debug port hardware configuration is not changed.
+
+**/
+BOOLEAN
+EFIAPI
+NeedReinitializeHardware(
+ IN USB3_DEBUG_PORT_HANDLE *Handle
+ )
+{
+ BOOLEAN Result;
+ volatile UINT32 Dcctrl;
+
+ Result = FALSE;
+
+ //
+ // If DCE bit, it means USB3 debug is not enabled.
+ //
+ Dcctrl = XhcReadDebugReg (Handle, XHC_DC_DCCTRL);
+ if ((Dcctrl & BIT0) == 0) {
+ Result = TRUE;
+ }
+
+ return Result;
+}
+
+/**
+ Create XHCI event ring.
+
+ @param Handle Debug port handle.
+ @param EventRing The created event ring.
+
+**/
+EFI_STATUS
+CreateEventRing (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ OUT EVENT_RING *EventRing
+ )
+{
+ VOID *Buf;
+ EVENT_RING_SEG_TABLE_ENTRY *ERSTBase;
+
+ ASSERT (EventRing != NULL);
+
+ //
+ // Allocate Event Ring
+ //
+ Buf = AllocateAlignBuffer (sizeof (TRB_TEMPLATE) * EVENT_RING_TRB_NUMBER);
+ ASSERT (Buf != NULL);
+ ASSERT (((UINTN) Buf & 0x3F) == 0);
+ ZeroMem (Buf, sizeof (TRB_TEMPLATE) * EVENT_RING_TRB_NUMBER);
+
+ EventRing->EventRingSeg0 = (EFI_PHYSICAL_ADDRESS)(UINTN) Buf;
+ EventRing->TrbNumber = EVENT_RING_TRB_NUMBER;
+ EventRing->EventRingDequeue = (EFI_PHYSICAL_ADDRESS)(UINTN) EventRing->EventRingSeg0;
+ EventRing->EventRingEnqueue = (EFI_PHYSICAL_ADDRESS)(UINTN) EventRing->EventRingSeg0;
+
+ //
+ // Software maintains an Event Ring Consumer Cycle State (CCS) bit, initializing it to '1'
+ // and toggling it every time the Event Ring Dequeue Pointer wraps back to the beginning of the Event Ring.
+ //
+ EventRing->EventRingCCS = 1;
+
+ //
+ // Allocate Event Ring Segment Table Entry 0 in Event Ring Segment Table
+ //
+ Buf = AllocateAlignBuffer (sizeof (EVENT_RING_SEG_TABLE_ENTRY) * ERST_NUMBER);
+ ASSERT (Buf != NULL);
+ ASSERT (((UINTN) Buf & 0x3F) == 0);
+ ZeroMem (Buf, sizeof (EVENT_RING_SEG_TABLE_ENTRY) * ERST_NUMBER);
+
+ ERSTBase = (EVENT_RING_SEG_TABLE_ENTRY *) Buf;
+ EventRing->ERSTBase = (EFI_PHYSICAL_ADDRESS)(UINTN) ERSTBase;
+
+ //
+ // Fill Event Segment address
+ //
+ ERSTBase->PtrLo = XHC_LOW_32BIT (EventRing->EventRingSeg0);
+ ERSTBase->PtrHi = XHC_HIGH_32BIT (EventRing->EventRingSeg0);
+ ERSTBase->RingTrbSize = EVENT_RING_TRB_NUMBER;
+
+ //
+ // Program the Interrupter Event Ring Dequeue Pointer (DCERDP) register (7.6.4.1)
+ //
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCERDP,
+ XHC_LOW_32BIT((UINT64)(UINTN)EventRing->EventRingDequeue)
+ );
+
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCERDP + 4,
+ XHC_HIGH_32BIT((UINT64)(UINTN)EventRing->EventRingDequeue)
+ );
+
+ //
+ // Program the Debug Capability Event Ring Segment Table Base Address (DCERSTBA) register(7.6.4.1)
+ //
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCERSTBA,
+ XHC_LOW_32BIT((UINT64)(UINTN)ERSTBase)
+ );
+
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCERSTBA + 4,
+ XHC_HIGH_32BIT((UINT64)(UINTN)ERSTBase)
+ );
+
+ //
+ // Program the Debug Capability Event Ring Segment Table Size (DCERSTSZ) register(7.6.4.1)
+ //
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCERSTSZ,
+ ERST_NUMBER
+ );
+ return EFI_SUCCESS;
+}
+
+/**
+ Create XHCI transfer ring.
+
+ @param Handle Debug port handle.
+ @param TrbNum The number of TRB in the ring.
+ @param TransferRing The created transfer ring.
+
+**/
+VOID
+CreateTransferRing (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 TrbNum,
+ OUT TRANSFER_RING *TransferRing
+ )
+{
+ VOID *Buf;
+ LINK_TRB *EndTrb;
+
+ Buf = AllocateAlignBuffer (sizeof (TRB_TEMPLATE) * TrbNum);
+ ASSERT (Buf != NULL);
+ ASSERT (((UINTN) Buf & 0xF) == 0);
+ ZeroMem (Buf, sizeof (TRB_TEMPLATE) * TrbNum);
+
+ TransferRing->RingSeg0 = (EFI_PHYSICAL_ADDRESS)(UINTN) Buf;
+ TransferRing->TrbNumber = TrbNum;
+ TransferRing->RingEnqueue = TransferRing->RingSeg0;
+ TransferRing->RingDequeue = TransferRing->RingSeg0;
+ TransferRing->RingPCS = 1;
+ //
+ // 4.9.2 Transfer Ring Management
+ // To form a ring (or circular queue) a Link TRB may be inserted at the end of a ring to
+ // point to the first TRB in the ring.
+ //
+ EndTrb = (LINK_TRB *) ((UINTN)Buf + sizeof (TRB_TEMPLATE) * (TrbNum - 1));
+ EndTrb->Type = TRB_TYPE_LINK;
+ EndTrb->PtrLo = XHC_LOW_32BIT (Buf);
+ EndTrb->PtrHi = XHC_HIGH_32BIT (Buf);
+ //
+ // Toggle Cycle (TC). When set to '1', the xHC shall toggle its interpretation of the Cycle bit.
+ //
+ EndTrb->TC = 1;
+ //
+ // Set Cycle bit as other TRB PCS init value
+ //
+ EndTrb->CycleBit = 0;
+}
+
+/**
+ Create debug capability context for XHC debug device.
+
+ @param Handle Debug port handle.
+
+ @retval EFI_SUCCESS The bit successfully changed by host controller.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+CreateDebugCapabilityContext (
+ IN USB3_DEBUG_PORT_HANDLE *Handle
+ )
+{
+ VOID *Buf;
+ XHC_DC_CONTEXT *DebugCapabilityContext;
+ UINT8 *String0Desc;
+ UINT8 *ManufacturerStrDesc;
+ UINT8 *ProductStrDesc;
+ UINT8 *SerialNumberStrDesc;
+
+ //
+ // Allocate debug device context
+ //
+ Buf = AllocateAlignBuffer (sizeof (XHC_DC_CONTEXT));
+ ASSERT (Buf != NULL);
+ ASSERT (((UINTN) Buf & 0xF) == 0);
+ ZeroMem (Buf, sizeof (XHC_DC_CONTEXT));
+
+ DebugCapabilityContext = (XHC_DC_CONTEXT *)(UINTN) Buf;
+ Handle->DebugCapabilityContext = (EFI_PHYSICAL_ADDRESS)(UINTN) DebugCapabilityContext;
+
+ //
+ // Initialize DbcInfoContext.
+ //
+ DebugCapabilityContext->DbcInfoContext.String0Length = STRING0_DESC_LEN;
+ DebugCapabilityContext->DbcInfoContext.ManufacturerStrLength = MANU_DESC_LEN;
+ DebugCapabilityContext->DbcInfoContext.ProductStrLength = PRODUCT_DESC_LEN;
+ DebugCapabilityContext->DbcInfoContext.SerialNumberStrLength = SERIAL_DESC_LEN;
+
+ //
+ // Initialize EpOutContext.
+ //
+ DebugCapabilityContext->EpOutContext.CErr = 0x3;
+ DebugCapabilityContext->EpOutContext.EPType = ED_BULK_OUT;
+ DebugCapabilityContext->EpOutContext.MaxPacketSize = 0x400;
+ DebugCapabilityContext->EpOutContext.AverageTRBLength = 0x1000;
+
+ //
+ // Initialize EpInContext.
+ //
+ DebugCapabilityContext->EpInContext.CErr = 0x3;
+ DebugCapabilityContext->EpInContext.EPType = ED_BULK_IN;
+ DebugCapabilityContext->EpInContext.MaxPacketSize = 0x400;
+ DebugCapabilityContext->EpInContext.AverageTRBLength = 0x1000;
+
+ //
+ // Update string descriptor address
+ //
+ String0Desc = (UINT8 *) AllocateAlignBuffer (STRING0_DESC_LEN + MANU_DESC_LEN + PRODUCT_DESC_LEN + SERIAL_DESC_LEN);
+ ASSERT (String0Desc != NULL);
+ ZeroMem (String0Desc, STRING0_DESC_LEN + MANU_DESC_LEN + PRODUCT_DESC_LEN + SERIAL_DESC_LEN);
+ CopyMem (String0Desc, mString0Desc, STRING0_DESC_LEN);
+ DebugCapabilityContext->DbcInfoContext.String0DescAddress = (UINT64)(UINTN)String0Desc;
+
+ ManufacturerStrDesc = String0Desc + STRING0_DESC_LEN;
+ CopyMem (ManufacturerStrDesc, mManufacturerStrDesc, MANU_DESC_LEN);
+ DebugCapabilityContext->DbcInfoContext.ManufacturerStrDescAddress = (UINT64)(UINTN)ManufacturerStrDesc;
+
+ ProductStrDesc = ManufacturerStrDesc + MANU_DESC_LEN;
+ CopyMem (ProductStrDesc, mProductStrDesc, PRODUCT_DESC_LEN);
+ DebugCapabilityContext->DbcInfoContext.ProductStrDescAddress = (UINT64)(UINTN)ProductStrDesc;
+
+ SerialNumberStrDesc = ProductStrDesc + PRODUCT_DESC_LEN;
+ CopyMem (SerialNumberStrDesc, mSerialNumberStrDesc, SERIAL_DESC_LEN);
+ DebugCapabilityContext->DbcInfoContext.SerialNumberStrDescAddress = (UINT64)(UINTN)SerialNumberStrDesc;
+
+ //
+ // Allocate and initialize the Transfer Ring for the Input Endpoint Context.
+ //
+ ZeroMem (&Handle->TransferRingIn, sizeof (TRANSFER_RING));
+ CreateTransferRing (Handle, TR_RING_TRB_NUMBER, &Handle->TransferRingIn);
+ DebugCapabilityContext->EpInContext.PtrLo = XHC_LOW_32BIT (Handle->TransferRingIn.RingSeg0) | BIT0;
+ DebugCapabilityContext->EpInContext.PtrHi = XHC_HIGH_32BIT (Handle->TransferRingIn.RingSeg0);
+
+ //
+ // Allocate and initialize the Transfer Ring for the Output Endpoint Context.
+ //
+ ZeroMem (&Handle->TransferRingOut, sizeof (TRANSFER_RING));
+ CreateTransferRing (Handle, TR_RING_TRB_NUMBER, &Handle->TransferRingOut);
+ DebugCapabilityContext->EpOutContext.PtrLo = XHC_LOW_32BIT (Handle->TransferRingOut.RingSeg0) | BIT0;
+ DebugCapabilityContext->EpOutContext.PtrHi = XHC_HIGH_32BIT (Handle->TransferRingOut.RingSeg0);
+
+ //
+ // Program the Debug Capability Context Pointer (DCCP) register(7.6.8.7)
+ //
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCCP,
+ XHC_LOW_32BIT((UINT64)(UINTN)DebugCapabilityContext)
+ );
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCCP + 4,
+ XHC_HIGH_32BIT((UINT64)(UINTN)DebugCapabilityContext)
+ );
+ return EFI_SUCCESS;
+}
+
+/**
+ Check if debug device is running.
+
+ @param Handle Debug port handle.
+
+**/
+VOID
+XhcDetectDebugCapabilityReady (
+ IN USB3_DEBUG_PORT_HANDLE *Handle
+ )
+{
+ UINT64 TimeOut;
+ volatile UINT32 Dcctrl;
+
+ TimeOut = 1;
+ if (Handle->Initialized == USB3DBG_DBG_CAB) {
+ //
+ // As detection is slow in seconds, wait for longer timeout for the first time.
+ // If first initialization is failed, we will try to enable debug device in the
+ // Poll function invoked by timer.
+ //
+ TimeOut = DivU64x32 (PcdGet64 (PcdUsbXhciDebugDetectTimeout), XHC_POLL_DELAY) + 1;
+ }
+
+ do {
+ //
+ // Check if debug device is in configured state
+ //
+ Dcctrl = XhcReadDebugReg (Handle, XHC_DC_DCCTRL);
+ if ((Dcctrl & BIT0) != 0) {
+ //
+ // Set the flag to indicate debug device is in configured state
+ //
+ Handle->Ready = TRUE;
+ break;
+ }
+ MicroSecondDelay (XHC_POLL_DELAY);
+ TimeOut--;
+ } while (TimeOut != 0);
+}
+
+/**
+ Initialize usb debug port hardware.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE The usb debug port hardware configuration is changed.
+ @retval FALSE The usb debug port hardware configuration is not changed.
+
+**/
+RETURN_STATUS
+EFIAPI
+InitializeUsbDebugHardware (
+ IN USB3_DEBUG_PORT_HANDLE *Handle
+ )
+{
+ RETURN_STATUS Status;
+ UINT8 *Buffer;
+ UINTN Index;
+ UINT8 TotalUsb3Port;
+ EFI_PHYSICAL_ADDRESS XhciOpRegister;
+
+ XhciOpRegister = Handle->XhciOpRegister;
+ TotalUsb3Port = MmioRead32 (((UINTN) Handle->XhciMmioBase + XHC_HCSPARAMS1_OFFSET)) >> 24;
+
+ if (Handle->Initialized == USB3DBG_NOT_ENABLED) {
+ //
+ // If XHCI supports debug capability, hardware resource has been allocated,
+ // but it has not been enabled, try to enable again.
+ //
+ goto Enable;
+ }
+
+ //
+ // Initialize for PEI phase when AllocatePages can work
+ //
+ Buffer = AllocateAlignBuffer (XHC_DEBUG_PORT_DATA_LENGTH);
+ if (Buffer == NULL) {
+ //
+ // AllocatePages can not still work now, return fail and do not initialize now.
+ //
+ return RETURN_NOT_READY;
+ }
+
+ //
+ // Reset port to get debug device discovered
+ //
+ for (Index = 0; Index < TotalUsb3Port; Index++) {
+ XhcSetR32Bit ((UINTN)XhciOpRegister + XHC_PORTSC_OFFSET + Index * 0x10, BIT4);
+ MicroSecondDelay (10 * 1000);
+ }
+
+ //
+ // Construct the buffer for URB in and URB out
+ //
+ Handle->UrbIn.Data = (EFI_PHYSICAL_ADDRESS)(UINTN) Buffer;
+ Handle->UrbOut.Data = (EFI_PHYSICAL_ADDRESS)(UINTN) Buffer + XHC_DEBUG_PORT_DATA_LENGTH;
+
+ //
+ // Initialize event ring
+ //
+ ZeroMem (&Handle->EventRing, sizeof (EVENT_RING));
+ Status = CreateEventRing (Handle, &Handle->EventRing);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Init IN and OUT endpoint context
+ //
+ Status = CreateDebugCapabilityContext (Handle);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Init DCDDI1 and DCDDI2
+ //
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCDDI1,
+ (UINT32)((XHCI_DEBUG_DEVICE_VENDOR_ID << 16) | XHCI_DEBUG_DEVICE_PROTOCOL)
+ );
+
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCDDI2,
+ (UINT32)((XHCI_DEBUG_DEVICE_REVISION << 16) | XHCI_DEBUG_DEVICE_PRODUCT_ID)
+ );
+
+Enable:
+ if ((Handle->Initialized == USB3DBG_NOT_ENABLED) && (!Handle->ChangePortPower)) {
+ //
+ // If the first time detection is failed, turn port power off and on in order to
+ // reset port status this time, then try to check if debug device is ready again.
+ //
+ for (Index = 0; Index < TotalUsb3Port; Index++) {
+ XhcClearR32Bit ((UINTN)XhciOpRegister + XHC_PORTSC_OFFSET + Index * 0x10, BIT9);
+ MicroSecondDelay (XHC_DEBUG_PORT_ON_OFF_DELAY);
+ XhcSetR32Bit ((UINTN)XhciOpRegister + XHC_PORTSC_OFFSET + Index * 0x10, BIT9);
+ MicroSecondDelay (XHC_DEBUG_PORT_ON_OFF_DELAY);
+ Handle->ChangePortPower = TRUE;
+ }
+ }
+
+ //
+ // Set DCE bit and LSE bit to "1" in DCCTRL in first initialization
+ //
+ XhcSetDebugRegBit (Handle, XHC_DC_DCCTRL, BIT1|BIT31);
+
+ XhcDetectDebugCapabilityReady (Handle);
+
+ Status = RETURN_SUCCESS;
+ if (!Handle->Ready) {
+ Handle->Initialized = USB3DBG_NOT_ENABLED;
+ Status = RETURN_NOT_READY;
+ } else {
+ Handle->Initialized = USB3DBG_ENABLED;
+ }
+
+ return Status;
+}
+
+/**
+ Read data from debug device and save the data in buffer.
+
+ Reads NumberOfBytes data bytes from a debug device into the buffer
+ specified by Buffer. The number of bytes actually read is returned.
+ If the return value is less than NumberOfBytes, then the rest operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to store the data read from the debug device.
+ @param NumberOfBytes Number of bytes which will be read.
+ @param Timeout Timeout value for reading from debug device. It unit is Microsecond.
+
+ @retval 0 Read data failed, no data is to be read.
+ @retval >0 Actual number of bytes read from debug device.
+
+**/
+UINTN
+EFIAPI
+DebugPortReadBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes,
+ IN UINTN Timeout
+ )
+{
+ USB3_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ RETURN_STATUS Status;
+ UINTN Received;
+ UINTN Total;
+ UINTN Remaining;
+ UINT8 Index;
+ UINTN Length;
+ UINT64 Begin;
+ UINT64 TimeoutTicker;
+ UINT64 TimerRound;
+ EFI_PHYSICAL_ADDRESS XhciMmioBase;
+
+ if (NumberOfBytes == 0 || Buffer == NULL) {
+ return 0;
+ }
+
+ Received = 0;
+ Total = 0;
+ Remaining = 0;
+
+ //
+ // If Handle is NULL, it means memory is ready for use.
+ // Use global variable to store handle value.
+ //
+ if (Handle == NULL) {
+ UsbDebugPortHandle = &mDebugCommunicationLibUsb3DebugPortHandle;
+ } else {
+ UsbDebugPortHandle = (USB3_DEBUG_PORT_HANDLE *)Handle;
+ }
+
+ if (UsbDebugPortHandle->Initialized == USB3DBG_NO_DBG_CAB) {
+ return 0;
+ }
+
+ XhciMmioBase = ProgramXhciBaseAddress ();
+ UpdateXhcResource (UsbDebugPortHandle, XhciMmioBase);
+
+ if (NeedReinitializeHardware(UsbDebugPortHandle)) {
+ Status = InitializeUsbDebugHardware (UsbDebugPortHandle);
+ if (RETURN_ERROR(Status)) {
+ return 0;
+ }
+ }
+
+ //
+ // First read data from buffer, then read debug port hw to get received data.
+ //
+ if (UsbDebugPortHandle->DataCount > 0) {
+ if (NumberOfBytes <= UsbDebugPortHandle->DataCount) {
+ Total = NumberOfBytes;
+ } else {
+ Total = UsbDebugPortHandle->DataCount;
+ }
+
+ for (Index = 0; Index < Total; Index++) {
+ Buffer[Index] = UsbDebugPortHandle->Data[Index];
+ }
+
+ for (Index = 0; Index < UsbDebugPortHandle->DataCount - Total; Index++) {
+ if (Total + Index >= 8) {
+ return 0;
+ }
+ UsbDebugPortHandle->Data[Index] = UsbDebugPortHandle->Data[Total + Index];
+ }
+ UsbDebugPortHandle->DataCount = (UINT8)(UsbDebugPortHandle->DataCount - (UINT8)Total);
+ }
+
+ //
+ // If Timeout is equal to 0, then it means it should always wait until all data required are received.
+ //
+ Begin = 0;
+ TimeoutTicker = 0;
+ TimerRound = 0;
+ if (Timeout != 0) {
+ Begin = GetPerformanceCounter ();
+ TimeoutTicker = DivU64x32 (
+ MultU64x64 (
+ UsbDebugPortHandle->TimerFrequency,
+ Timeout
+ ),
+ 1000000u
+ );
+ TimerRound = DivU64x64Remainder (
+ TimeoutTicker,
+ DivU64x32 (UsbDebugPortHandle->TimerCycle, 2),
+ &TimeoutTicker
+ );
+ }
+
+ //
+ // Read remaining data by executing one or more usb debug transfer transactions at usb debug port hw.
+ //
+ while (Total < NumberOfBytes) {
+ if (Timeout != 0) {
+ if (TimerRound == 0) {
+ if (IsTimerTimeout (UsbDebugPortHandle, Begin, TimeoutTicker)) {
+ //
+ // If time out occurs.
+ //
+ return 0;
+ }
+ } else {
+ if (IsTimerTimeout (UsbDebugPortHandle, Begin, DivU64x32 (UsbDebugPortHandle->TimerCycle, 2))) {
+ TimerRound --;
+ }
+ }
+ }
+ Remaining = NumberOfBytes - Total;
+ if (Remaining >= USB3_DEBUG_PORT_MAX_PACKET_SIZE) {
+ Received = USB3_DEBUG_PORT_MAX_PACKET_SIZE;
+ Status = XhcDataTransfer (UsbDebugPortHandle, EfiUsbDataIn, Buffer + Total, &Received, DATA_TRANSFER_READ_TIMEOUT);
+ } else {
+ Received = USB3_DEBUG_PORT_MAX_PACKET_SIZE;
+ Status = XhcDataTransfer (UsbDebugPortHandle, EfiUsbDataIn, &UsbDebugPortHandle->Data[0], &Received, DATA_TRANSFER_READ_TIMEOUT);
+ UsbDebugPortHandle->DataCount = (UINT8) Received;
+
+ if (Remaining <= Received) {
+ //
+ // The data received are more than required
+ //
+ Length = (UINT8)Remaining;
+ } else {
+ //
+ // The data received are less than the remaining bytes
+ //
+ Length = (UINT8)Received;
+ }
+
+ //
+ // Copy required data from the data buffer to user buffer.
+ //
+ for (Index = 0; Index < Length; Index++) {
+ (Buffer + Total)[Index] = UsbDebugPortHandle->Data[Index];
+ UsbDebugPortHandle->DataCount--;
+ }
+
+ //
+ // reorder the data buffer to make available data arranged from the beginning of the data buffer.
+ //
+ for (Index = 0; Index < Received - Length; Index++) {
+ if (Length + Index >= 8) {
+ return 0;
+ }
+ UsbDebugPortHandle->Data[Index] = UsbDebugPortHandle->Data[Length + Index];
+ }
+ //
+ // fixup the real required length of data.
+ //
+ Received = Length;
+ }
+ Total += Received;
+ }
+ return Total;
+}
+
+/**
+ Write data from buffer to debug device.
+
+ Writes NumberOfBytes data bytes from Buffer to the debug device.
+ The number of bytes actually written to the debug device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the debug device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the debug device.
+ If this value is less than NumberOfBytes, then the read operation failed.
+
+**/
+UINTN
+EFIAPI
+DebugPortWriteBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ USB3_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ RETURN_STATUS Status;
+ UINTN Sent;
+ UINTN Total;
+ EFI_PHYSICAL_ADDRESS XhciMmioBase;
+ UINTN Index;
+
+ if (NumberOfBytes == 0 || Buffer == NULL) {
+ return 0;
+ }
+
+ Sent = 0;
+ Total = 0;
+
+ //
+ // If Handle is NULL, it means memory is ready for use.
+ // Use global variable to store handle value.
+ //
+ if (Handle == NULL) {
+ UsbDebugPortHandle = &mDebugCommunicationLibUsb3DebugPortHandle;
+ } else {
+ UsbDebugPortHandle = (USB3_DEBUG_PORT_HANDLE *)Handle;
+ }
+
+ if (UsbDebugPortHandle->Initialized == USB3DBG_NO_DBG_CAB) {
+ return 0;
+ }
+
+ //
+ // MMIO base address is possible to clear, set it if it is cleared. (XhciMemorySpaceClose in PchUsbCommon.c)
+ //
+ XhciMmioBase = ProgramXhciBaseAddress ();
+
+ UpdateXhcResource (UsbDebugPortHandle, XhciMmioBase);
+
+ if (NeedReinitializeHardware(UsbDebugPortHandle)) {
+ Status = InitializeUsbDebugHardware (UsbDebugPortHandle);
+ if (RETURN_ERROR(Status)) {
+ return 0;
+ }
+ }
+
+ //
+ // When host is trying to send data, write will be blocked.
+ // Poll to see if there is any data sent by host at first.
+ //
+ DebugPortPollBuffer (Handle);
+
+ Index = 0;
+ while ((Total < NumberOfBytes)) {
+ if (NumberOfBytes - Total > USB3_DEBUG_PORT_MAX_PACKET_SIZE) {
+ Sent = USB3_DEBUG_PORT_MAX_PACKET_SIZE;
+ } else {
+ Sent = (UINT8)(NumberOfBytes - Total);
+ }
+ Status = XhcDataTransfer (UsbDebugPortHandle, EfiUsbDataOut, Buffer + Total, &Sent, DATA_TRANSFER_WRITE_TIMEOUT);
+ Total += Sent;
+ }
+
+ return Total;
+}
+
+/**
+ Polls a debug device to see if there is any data waiting to be read.
+
+ Polls a debug device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the debug device, then TRUE is returned.
+ If there is no data waiting to be read from the debug device, then FALSE is returned.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE Data is waiting to be read from the debug device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPortPollBuffer (
+ IN DEBUG_PORT_HANDLE Handle
+ )
+{
+ USB3_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ UINTN Length;
+ RETURN_STATUS Status;
+ UINT8 Buffer[XHC_DEBUG_PORT_DATA_LENGTH];
+ EFI_PHYSICAL_ADDRESS XhciMmioBase;
+
+ //
+ // If Handle is NULL, it means memory is ready for use.
+ // Use global variable to store handle value.
+ //
+ if (Handle == NULL) {
+ UsbDebugPortHandle = &mDebugCommunicationLibUsb3DebugPortHandle;
+ } else {
+ UsbDebugPortHandle = (USB3_DEBUG_PORT_HANDLE *)Handle;
+ }
+
+ if (UsbDebugPortHandle->Initialized == USB3DBG_NO_DBG_CAB) {
+ return 0;
+ }
+
+ XhciMmioBase = ProgramXhciBaseAddress ();
+ UpdateXhcResource (UsbDebugPortHandle, XhciMmioBase);
+
+ if (NeedReinitializeHardware(UsbDebugPortHandle)) {
+ Status = InitializeUsbDebugHardware(UsbDebugPortHandle);
+ if (RETURN_ERROR(Status)) {
+ return FALSE;
+ }
+ }
+
+ //
+ // If the data buffer is not empty, then return TRUE directly.
+ // Otherwise initialize a usb read transaction and read data to internal data buffer.
+ //
+ if (UsbDebugPortHandle->DataCount != 0) {
+ return TRUE;
+ }
+
+ //
+ // Read most 8-bytes data
+ //
+ Length = XHC_DEBUG_PORT_DATA_LENGTH;
+ XhcDataTransfer (Handle, EfiUsbDataIn, Buffer, &Length, DATA_TRANSFER_POLL_TIMEOUT);
+
+ if (Length > 8) {
+ return FALSE;
+ }
+
+ if (Length == 0) {
+ return FALSE;
+ }
+
+ //
+ // Store data into internal buffer for use later
+ //
+ CopyMem (UsbDebugPortHandle->Data, Buffer, Length);
+ UsbDebugPortHandle->DataCount = (UINT8) Length;
+ return TRUE;
+}
+
+/**
+ Initialize the debug port.
+
+ If Function is not NULL, Debug Communication Libary will call this function
+ by passing in the Context to be the first parameter. If needed, Debug Communication
+ Library will create one debug port handle to be the second argument passing in
+ calling the Function, otherwise it will pass NULL to be the second argument of
+ Function.
+
+ If Function is NULL, and Context is not NULL, the Debug Communication Library could
+ a) Return the same handle as passed in (as Context parameter).
+ b) Ignore the input Context parameter and create new hanlde to be returned.
+
+ If parameter Function is NULL and Context is NULL, Debug Communication Library could
+ created a new handle if needed and return it, otherwise it will return NULL.
+
+ @param[in] Context Context needed by callback function; it was optional.
+ @param[in] Function Continue function called by Debug Communication library;
+ it was optional.
+
+ @return The debug port handle created by Debug Communication Library if Function
+ is not NULL.
+
+**/
+DEBUG_PORT_HANDLE
+EFIAPI
+DebugPortInitialize (
+ IN VOID *Context,
+ IN DEBUG_PORT_CONTINUE Function
+ )
+{
+ RETURN_STATUS Status;
+ USB3_DEBUG_PORT_HANDLE Handle;
+ USB3_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ UINT64 TimerStartValue;
+ UINT64 TimerEndValue;
+
+ //
+ // Validate the PCD PcdDebugPortHandleBufferSize value
+ //
+ ASSERT (PcdGet16 (PcdDebugPortHandleBufferSize) == sizeof (USB3_DEBUG_PORT_HANDLE));
+
+ if (Function == NULL && Context != NULL) {
+ UsbDebugPortHandle = (USB3_DEBUG_PORT_HANDLE *)Context;
+ } else {
+ ZeroMem(&Handle, sizeof (USB3_DEBUG_PORT_HANDLE));
+ UsbDebugPortHandle = &Handle;
+ }
+
+ UsbDebugPortHandle->TimerFrequency = GetPerformanceCounterProperties (
+ &TimerStartValue,
+ &TimerEndValue
+ );
+
+ if (TimerEndValue < TimerStartValue) {
+ UsbDebugPortHandle->TimerCountDown = TRUE;
+ UsbDebugPortHandle->TimerCycle = TimerStartValue - TimerEndValue;
+ } else {
+ UsbDebugPortHandle->TimerCountDown = FALSE;
+ UsbDebugPortHandle->TimerCycle = TimerEndValue - TimerStartValue;
+ }
+
+ if (Function == NULL && Context != NULL) {
+ return (DEBUG_PORT_HANDLE *) Context;
+ }
+
+ //
+ // Read 64-bit MMIO base address
+ //
+ UsbDebugPortHandle->XhciMmioBase = ProgramXhciBaseAddress ();
+
+ Status = CalculateUsbDebugPortMmioBase (UsbDebugPortHandle);
+ if (RETURN_ERROR (Status)) {
+ goto Exit;
+ }
+
+ if (NeedReinitializeHardware(&Handle)) {
+ Status = InitializeUsbDebugHardware (&Handle);
+ if (RETURN_ERROR(Status)) {
+ goto Exit;
+ }
+ }
+
+Exit:
+
+ if (Function != NULL) {
+ Function (Context, &Handle);
+ } else {
+ CopyMem(&mDebugCommunicationLibUsb3DebugPortHandle, &Handle, sizeof (USB3_DEBUG_PORT_HANDLE));
+ }
+
+ return (DEBUG_PORT_HANDLE)(UINTN)&mDebugCommunicationLibUsb3DebugPortHandle;
+}
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.c new file mode 100644 index 0000000000..c232323df8 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.c @@ -0,0 +1,48 @@ +/** @file
+ Debug Port Library implementation based on usb3 debug port.
+
+ Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <PiDxe.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include "DebugCommunicationLibUsb3Internal.h"
+
+/**
+ Allocate aligned memory for XHC's usage.
+
+ @param BufferSize The size, in bytes, of the Buffer.
+
+ @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID*
+AllocateAlignBuffer (
+ IN UINTN BufferSize
+ )
+{
+ VOID *Buf;
+
+ Buf = NULL;
+
+ if (gBS != NULL) {
+ Buf = (VOID *)(UINTN)0xFFFFFFFF;
+ gBS->AllocatePages (
+ AllocateMaxAddress,
+ EfiACPIMemoryNVS,
+ EFI_SIZE_TO_PAGES (BufferSize),
+ (EFI_PHYSICAL_ADDRESS *) &Buf
+ );
+ }
+
+ return Buf;
+}
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.inf b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.inf new file mode 100644 index 0000000000..e98462306c --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.inf @@ -0,0 +1,69 @@ +## @file
+# Debug Communication Library instance based on usb3 debug port.
+#
+# Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DebugCommunicationLibUsb3Dxe
+ MODULE_UNI_FILE = DebugCommunicationLibUsb3Dxe.uni
+ FILE_GUID = C41F8C82-B3E6-47e0-A61D-0F9E429E6996
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = DebugCommunicationLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER SMM_CORE
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF
+#
+
+[Sources]
+ DebugCommunicationLibUsb3Dxe.c
+ DebugCommunicationLibUsb3Transfer.c
+ DebugCommunicationLibUsb3Common.c
+ DebugCommunicationLibUsb3Internal.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ IntelFrameworkPkg/IntelFrameworkPkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[Pcd]
+ ## The memory BAR of ehci host controller, in which usb debug feature is enabled.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciMemorySpaceBase ## SOMETIMES_CONSUMES
+
+ ## The pci address of ehci host controller, in which usb debug feature is enabled.
+ ## The format of pci address please refer to SourceLevelDebugPkg.dec
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciPciAddress ## CONSUMES
+
+ ## Per XHCI spec, software shall impose a timeout between the detection of the Debug Host
+ ## connection and the DbC Run transition to 1. This PCD specifies the timeout value in microsecond.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciDebugDetectTimeout ## SOMETIMES_CONSUMES
+
+ ## The value of data buffer size used for USB debug port handle.
+ ## It should be equal to sizeof (USB3_DEBUG_PORT_HANDLE).
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugPortHandleBufferSize|256 ## SOMETIMES_CONSUMES
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ IoLib
+ PciLib
+ TimerLib
+ UefiBootServicesTableLib
+ UefiLib
+ BaseMemoryLib
+
\ No newline at end of file diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.uni b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.uni Binary files differnew file mode 100644 index 0000000000..111cf79c66 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.uni diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Internal.h b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Internal.h new file mode 100644 index 0000000000..2f2025075a --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Internal.h @@ -0,0 +1,763 @@ +/** @file
+ Debug Port Library implementation based on usb3 debug port.
+
+ Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __USB3_DEBUG_PORT_LIB_INTERNAL__
+#define __USB3_DEBUG_PORT_LIB_INTERNAL__
+
+#include <Uefi.h>
+#include <Base.h>
+#include <IndustryStandard/Usb.h>
+#include <Library/IoLib.h>
+#include <IndustryStandard/Pci.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/BaseLib.h>
+#include <Library/TimerLib.h>
+#include <Library/DebugCommunicationLib.h>
+#include <Library/PciLib.h>
+#include <Library/SerialPortLib.h> // Todo: remove in future
+
+//
+// Internal serial debug - remove finally
+//
+#include <Library/SerialPortLib.h>
+#include <Library/PrintLib.h>
+
+//
+// USB Debug GUID value
+//
+#define USB3_DBG_GUID \
+ { \
+ 0xb2a56f4d, 0x9177, 0x4fc8, { 0xa6, 0x77, 0xdd, 0x96, 0x3e, 0xb4, 0xcb, 0x1b } \
+ }
+
+//
+// The state machine of usb debug port
+//
+#define USB3DBG_NO_DBG_CAB 0 // The XHCI host controller does not support debug capability
+#define USB3DBG_DBG_CAB 1 // The XHCI host controller supports debug capability
+#define USB3DBG_ENABLED 2 // The XHCI debug device is enabled
+#define USB3DBG_NOT_ENABLED 4 // The XHCI debug device is not enabled
+
+#define USB3_DEBUG_PORT_MAX_PACKET_SIZE 0x08
+
+#define XHCI_DEBUG_DEVICE_VENDOR_ID 0x0525
+#define XHCI_DEBUG_DEVICE_PRODUCT_ID 0x127A
+#define XHCI_DEBUG_DEVICE_PROTOCOL 0xFF
+#define XHCI_DEBUG_DEVICE_REVISION 0x00
+
+#define XHCI_BASE_ADDRESS_64_BIT_MASK 0xFFFFFFFFFFFF0000ULL
+#define XHCI_BASE_ADDRESS_32_BIT_MASK 0xFFFF0000
+
+#define PCI_CAPABILITY_ID_DEBUG_PORT 0x0A
+#define XHC_HCCPARAMS_OFFSET 0x10
+#define XHC_CAPABILITY_ID_MASK 0xFF
+#define XHC_NEXT_CAPABILITY_MASK 0xFF00
+
+#define XHC_HCSPARAMS1_OFFSET 0x4 // Structural Parameters 1
+#define XHC_USBCMD_OFFSET 0x0 // USB Command Register Offset
+#define XHC_USBSTS_OFFSET 0x4 // USB Status Register Offset
+#define XHC_PORTSC_OFFSET 0x400 // Port Status and Control Register Offset
+
+#define XHC_USBCMD_RUN BIT0 // Run/Stop
+#define XHC_USBCMD_RESET BIT1 // Host Controller Reset
+
+#define XHC_USBSTS_HALT BIT0
+
+//
+// Transfer the data of 8 bytes each time
+//
+#define XHC_DEBUG_PORT_DATA_LENGTH 8
+
+//
+// Indicate the timeout when data is transferred in microsecond. 0 means infinite timeout.
+//
+#define DATA_TRANSFER_WRITE_TIMEOUT 0
+#define DATA_TRANSFER_READ_TIMEOUT 50000
+#define DATA_TRANSFER_POLL_TIMEOUT 1000
+
+//
+// XHCI port power off/on delay
+//
+#define XHC_DEBUG_PORT_ON_OFF_DELAY 100000
+
+//
+// USB debug device string descritpor (header size + unicode string length)
+//
+#define STRING0_DESC_LEN 4
+#define MANU_DESC_LEN 12
+#define PRODUCT_DESC_LEN 40
+#define SERIAL_DESC_LEN 4
+
+//
+// Debug Capability Register Offset
+//
+#define XHC_DC_DCID 0x0
+#define XHC_DC_DCDB 0x4
+#define XHC_DC_DCERSTSZ 0x8
+#define XHC_DC_DCERSTBA 0x10
+#define XHC_DC_DCERDP 0x18
+#define XHC_DC_DCCTRL 0x20
+#define XHC_DC_DCST 0x24
+#define XHC_DC_DCPORTSC 0x28
+#define XHC_DC_DCCP 0x30
+#define XHC_DC_DCDDI1 0x38
+#define XHC_DC_DCDDI2 0x3C
+
+#define TRB_TYPE_LINK 6
+
+#define ERST_NUMBER 0x01
+#define TR_RING_TRB_NUMBER 0x100
+#define EVENT_RING_TRB_NUMBER 0x200
+
+#define ED_BULK_OUT 2
+#define ED_BULK_IN 6
+
+#define XHC_LOW_32BIT(Addr64) ((UINT32)(((UINTN)(Addr64)) & 0xFFFFFFFF))
+#define XHC_HIGH_32BIT(Addr64) ((UINT32)(RShiftU64((UINT64)(UINTN)(Addr64), 32) & 0xFFFFFFFF))
+#define XHC_BIT_IS_SET(Data, Bit) ((BOOLEAN)(((Data) & (Bit)) == (Bit)))
+
+//
+// Endpoint Type (EP Type).
+//
+#define ED_NOT_VALID 0
+#define ED_ISOCH_OUT 1
+#define ED_BULK_OUT 2
+#define ED_INTERRUPT_OUT 3
+#define ED_CONTROL_BIDIR 4
+#define ED_ISOCH_IN 5
+#define ED_BULK_IN 6
+#define ED_INTERRUPT_IN 7
+
+//
+// 6.4.5 TRB Completion Codes
+//
+#define TRB_COMPLETION_INVALID 0
+#define TRB_COMPLETION_SUCCESS 1
+#define TRB_COMPLETION_DATA_BUFFER_ERROR 2
+#define TRB_COMPLETION_BABBLE_ERROR 3
+#define TRB_COMPLETION_USB_TRANSACTION_ERROR 4
+#define TRB_COMPLETION_TRB_ERROR 5
+#define TRB_COMPLETION_STALL_ERROR 6
+#define TRB_COMPLETION_SHORT_PACKET 13
+
+//
+// 6.4.6 TRB Types
+//
+#define TRB_TYPE_NORMAL 1
+#define TRB_TYPE_SETUP_STAGE 2
+#define TRB_TYPE_DATA_STAGE 3
+#define TRB_TYPE_STATUS_STAGE 4
+#define TRB_TYPE_ISOCH 5
+#define TRB_TYPE_LINK 6
+#define TRB_TYPE_EVENT_DATA 7
+#define TRB_TYPE_NO_OP 8
+#define TRB_TYPE_EN_SLOT 9
+#define TRB_TYPE_DIS_SLOT 10
+#define TRB_TYPE_ADDRESS_DEV 11
+#define TRB_TYPE_CON_ENDPOINT 12
+#define TRB_TYPE_EVALU_CONTXT 13
+#define TRB_TYPE_RESET_ENDPOINT 14
+#define TRB_TYPE_STOP_ENDPOINT 15
+#define TRB_TYPE_SET_TR_DEQUE 16
+#define TRB_TYPE_RESET_DEV 17
+#define TRB_TYPE_GET_PORT_BANW 21
+#define TRB_TYPE_FORCE_HEADER 22
+#define TRB_TYPE_NO_OP_COMMAND 23
+#define TRB_TYPE_TRANS_EVENT 32
+#define TRB_TYPE_COMMAND_COMPLT_EVENT 33
+#define TRB_TYPE_PORT_STATUS_CHANGE_EVENT 34
+#define TRB_TYPE_HOST_CONTROLLER_EVENT 37
+#define TRB_TYPE_DEVICE_NOTIFI_EVENT 38
+#define TRB_TYPE_MFINDEX_WRAP_EVENT 39
+
+//
+// Convert millisecond to microsecond.
+//
+#define XHC_1_MILLISECOND (1000)
+#define XHC_POLL_DELAY (1000)
+#define XHC_GENERIC_TIMEOUT (10 * 1000)
+
+#define EFI_USB_SPEED_FULL 0x0000 ///< 12 Mb/s, USB 1.1 OHCI and UHCI HC.
+#define EFI_USB_SPEED_LOW 0x0001 ///< 1 Mb/s, USB 1.1 OHCI and UHCI HC.
+#define EFI_USB_SPEED_HIGH 0x0002 ///< 480 Mb/s, USB 2.0 EHCI HC.
+#define EFI_USB_SPEED_SUPER 0x0003 ///< 4.8 Gb/s, USB 3.0 XHCI HC.
+
+//
+// Transfer types, used in URB to identify the transfer type
+//
+#define XHC_CTRL_TRANSFER 0x01
+#define XHC_BULK_TRANSFER 0x02
+#define XHC_INT_TRANSFER_SYNC 0x04
+#define XHC_INT_TRANSFER_ASYNC 0x08
+#define XHC_INT_ONLY_TRANSFER_ASYNC 0x10
+
+//
+// USB Transfer Results
+//
+#define EFI_USB_NOERROR 0x00
+#define EFI_USB_ERR_NOTEXECUTE 0x01
+#define EFI_USB_ERR_STALL 0x02
+#define EFI_USB_ERR_BUFFER 0x04
+#define EFI_USB_ERR_BABBLE 0x08
+#define EFI_USB_ERR_NAK 0x10
+#define EFI_USB_ERR_CRC 0x20
+#define EFI_USB_ERR_TIMEOUT 0x40
+#define EFI_USB_ERR_BITSTUFF 0x80
+#define EFI_USB_ERR_SYSTEM 0x100
+
+#pragma pack(1)
+
+//
+// 7.6.9 OUT/IN EP Context: 64 bytes
+// 7.6.9.2 When used by the DbC it is always a 64 byte data structure
+//
+typedef struct _ENDPOINT_CONTEXT_64 {
+ UINT32 EPState:3;
+ UINT32 RsvdZ1:5;
+ UINT32 Mult:2; // set to 0
+ UINT32 MaxPStreams:5; // set to 0
+ UINT32 LSA:1; // set to 0
+ UINT32 Interval:8; // set to 0
+ UINT32 RsvdZ2:8;
+
+ UINT32 RsvdZ3:1;
+ UINT32 CErr:2;
+ UINT32 EPType:3;
+ UINT32 RsvdZ4:1;
+ UINT32 HID:1; // set to 0
+ UINT32 MaxBurstSize:8;
+ UINT32 MaxPacketSize:16;
+
+ UINT32 PtrLo;
+
+ UINT32 PtrHi;
+
+ UINT32 AverageTRBLength:16;
+ UINT32 MaxESITPayload:16; // set to 0
+
+ UINT32 RsvdZ5; // Reserved
+ UINT32 RsvdZ6;
+ UINT32 RsvdZ7;
+
+ UINT32 RsvdZ8;
+ UINT32 RsvdZ9;
+ UINT32 RsvdZ10;
+ UINT32 RsvdZ11;
+
+ UINT32 RsvdZ12;
+ UINT32 RsvdZ13;
+ UINT32 RsvdZ14;
+ UINT32 RsvdZ15;
+} ENDPOINT_CONTEXT_64;
+
+//
+// 6.4.1.1 Normal TRB: 16 bytes
+// A Normal TRB is used in several ways; exclusively on Bulk and Interrupt Transfer Rings for normal and
+// Scatter/Gather operations, to define additional data buffers for Scatter/Gather operations on Isoch Transfer
+// Rings, and to define the Data stage information for Control Transfer Rings.
+//
+typedef struct _TRANSFER_TRB_NORMAL {
+ UINT32 TRBPtrLo;
+
+ UINT32 TRBPtrHi;
+
+ UINT32 Length:17;
+ UINT32 TDSize:5;
+ UINT32 IntTarget:10;
+
+ UINT32 CycleBit:1;
+ UINT32 ENT:1;
+ UINT32 ISP:1;
+ UINT32 NS:1;
+ UINT32 CH:1;
+ UINT32 IOC:1;
+ UINT32 IDT:1;
+ UINT32 RsvdZ1:2;
+ UINT32 BEI:1;
+ UINT32 Type:6;
+ UINT32 RsvdZ2:16;
+} TRANSFER_TRB_NORMAL;
+
+//
+// 6.4.2.1 Transfer Event TRB: 16 bytes
+// A Transfer Event provides the completion status associated with a Transfer TRB. Refer to section 4.11.3.1
+// for more information on the use and operation of Transfer Events.
+//
+typedef struct _EVT_TRB_TRANSFER {
+ UINT32 TRBPtrLo;
+
+ UINT32 TRBPtrHi;
+
+ UINT32 Length:24;
+ UINT32 Completecode:8;
+
+ UINT32 CycleBit:1;
+ UINT32 RsvdZ1:1;
+ UINT32 ED:1;
+ UINT32 RsvdZ2:7;
+ UINT32 Type:6;
+ UINT32 EndpointId:5;
+ UINT32 RsvdZ3:3;
+ UINT32 SlotId:8;
+} EVT_TRB_TRANSFER;
+
+//
+// 6.4.4.1 Link TRB: 16 bytes
+// A Link TRB provides support for non-contiguous TRB Rings.
+//
+typedef struct _LINK_TRB {
+ UINT32 PtrLo;
+
+ UINT32 PtrHi;
+
+ UINT32 RsvdZ1:22;
+ UINT32 InterTarget:10;
+
+ UINT32 CycleBit:1;
+ UINT32 TC:1;
+ UINT32 RsvdZ2:2;
+ UINT32 CH:1;
+ UINT32 IOC:1;
+ UINT32 RsvdZ3:4;
+ UINT32 Type:6;
+ UINT32 RsvdZ4:16;
+} LINK_TRB;
+
+//
+// TRB Template: 16 bytes
+//
+typedef struct _TRB_TEMPLATE {
+ UINT32 Parameter1;
+
+ UINT32 Parameter2;
+
+ UINT32 Status;
+
+ UINT32 CycleBit:1;
+ UINT32 RsvdZ1:9;
+ UINT32 Type:6;
+ UINT32 Control:16;
+} TRB_TEMPLATE;
+
+//
+// Refer to XHCI 6.5 Event Ring Segment Table: 16 bytes
+//
+typedef struct _EVENT_RING_SEG_TABLE_ENTRY {
+ UINT32 PtrLo;
+ UINT32 PtrHi;
+ UINT32 RingTrbSize:16;
+ UINT32 RsvdZ1:16;
+ UINT32 RsvdZ2;
+} EVENT_RING_SEG_TABLE_ENTRY;
+
+//
+// Size: 40 bytes
+//
+typedef struct _EVENT_RING {
+ EFI_PHYSICAL_ADDRESS ERSTBase;
+ EFI_PHYSICAL_ADDRESS EventRingSeg0;
+ UINT32 TrbNumber;
+ EFI_PHYSICAL_ADDRESS EventRingEnqueue;
+ EFI_PHYSICAL_ADDRESS EventRingDequeue;
+ UINT32 EventRingCCS;
+} EVENT_RING;
+
+// Size: 32 bytes
+typedef struct _TRANSFER_RING {
+ EFI_PHYSICAL_ADDRESS RingSeg0;
+ UINT32 TrbNumber;
+ EFI_PHYSICAL_ADDRESS RingEnqueue;
+ EFI_PHYSICAL_ADDRESS RingDequeue;
+ UINT32 RingPCS;
+} TRANSFER_RING;
+
+//
+// Size: 64 bytes
+//
+typedef struct _DBC_INFO_CONTEXT {
+ UINT64 String0DescAddress;
+ UINT64 ManufacturerStrDescAddress;
+ UINT64 ProductStrDescAddress;
+ UINT64 SerialNumberStrDescAddress;
+ UINT64 String0Length:8;
+ UINT64 ManufacturerStrLength:8;
+ UINT64 ProductStrLength:8;
+ UINT64 SerialNumberStrLength:8;
+ UINT64 RsvdZ1:32;
+ UINT64 RsvdZ2;
+ UINT64 RsvdZ3;
+ UINT64 RsvdZ4;
+} DBC_INFO_CONTEXT;
+
+//
+// Debug Capability Context Data Structure: 192 bytes
+//
+typedef struct _XHC_DC_CONTEXT {
+ DBC_INFO_CONTEXT DbcInfoContext;
+ ENDPOINT_CONTEXT_64 EpOutContext;
+ ENDPOINT_CONTEXT_64 EpInContext;
+} XHC_DC_CONTEXT;
+
+//
+// Size: 16 bytes
+//
+typedef union _TRB {
+ TRB_TEMPLATE TrbTemplate;
+ TRANSFER_TRB_NORMAL TrbNormal;
+} TRB;
+
+///
+/// USB data transfer direction
+///
+typedef enum {
+ EfiUsbDataIn,
+ EfiUsbDataOut,
+ EfiUsbNoData
+} EFI_USB_DATA_DIRECTION;
+
+//
+// URB (Usb Request Block) contains information for all kinds of
+// usb requests.
+//
+typedef struct _URB {
+ //
+ // Transfer data buffer
+ //
+ EFI_PHYSICAL_ADDRESS Data;
+ UINT32 DataLen;
+
+ //
+ // Execute result
+ //
+ UINT32 Result;
+ //
+ // Completed data length
+ //
+ UINT32 Completed;
+ //
+ // Tranfer Ring info
+ //
+ EFI_PHYSICAL_ADDRESS Ring;
+ EFI_PHYSICAL_ADDRESS Trb;
+ BOOLEAN Finished;
+ EFI_USB_DATA_DIRECTION Direction;
+} URB;
+
+typedef struct _USB3_DEBUG_PORT_INSTANCE {
+ UINT8 Initialized;
+
+ //
+ // The flag indicates debug device is ready
+ //
+ BOOLEAN DebugSupport;
+
+ //
+ // The flag indicates debug device is ready
+ //
+ BOOLEAN Ready;
+
+ //
+ // The flag indicates if USB 3.0 ports has been turn off/on power
+ //
+ BOOLEAN ChangePortPower;
+
+ //
+ // XHCI MMIO Base address
+ //
+ EFI_PHYSICAL_ADDRESS XhciMmioBase;
+
+ //
+ // XHCI OP RegisterBase address
+ //
+ EFI_PHYSICAL_ADDRESS XhciOpRegister;
+
+ //
+ // XHCI Debug Register Base Address
+ //
+ EFI_PHYSICAL_ADDRESS DebugCapabilityBase;
+
+ //
+ // XHCI Debug Capability offset
+ //
+ UINT64 DebugCapabilityOffset;
+
+ //
+ // XHCI Debug Context Address
+ //
+ EFI_PHYSICAL_ADDRESS DebugCapabilityContext;
+
+ //
+ // Transfer Ring
+ //
+ TRANSFER_RING TransferRingOut;
+ TRANSFER_RING TransferRingIn;
+
+ //
+ // EventRing
+ //
+ EVENT_RING EventRing;
+
+ //
+ // URB - Read
+ //
+ URB UrbOut;
+
+ //
+ // URB - Write
+ //
+ URB UrbIn;
+
+ //
+ // The available data length in the following data buffer.
+ //
+ UINT8 DataCount;
+ //
+ // The data buffer. Maximum length is 8 bytes.
+ //
+ UINT8 Data[8];
+ //
+ // Timter settings
+ //
+ UINT64 TimerFrequency;
+ UINT64 TimerCycle;
+ BOOLEAN TimerCountDown;
+
+} USB3_DEBUG_PORT_HANDLE;
+
+#pragma pack()
+
+/**
+ Read XHCI debug register.
+
+ @param Handle Debug port handle.
+ @param Offset The offset of the debug register.
+
+ @return The register content read
+
+**/
+UINT32
+XhcReadDebugReg (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 Offset
+ );
+
+/**
+ Set one bit of the debug register while keeping other bits.
+
+ @param Handle Debug port handle.
+ @param Offset The offset of the debug register.
+ @param Bit The bit mask of the register to set.
+
+**/
+VOID
+XhcSetDebugRegBit (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 Offset,
+ IN UINT32 Bit
+ );
+
+/**
+ Write the data to the debug register.
+
+ @param Handle Debug port handle.
+ @param Offset The offset of the debug register.
+ @param Data The data to write.
+
+**/
+VOID
+XhcWriteDebugReg (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ );
+
+/**
+ Discover the USB3 debug device.
+
+ @param Handle Debug port handle.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.
+
+**/
+RETURN_STATUS
+DiscoverUsb3DebugPort(
+ USB3_DEBUG_PORT_HANDLE *Handle
+ );
+
+/**
+ Initialize the Serial Device hardware.
+
+ @param Handle Debug port handle.
+
+ @retval RETURN_SUCCESS The serial device was initialized successfully.
+ @retval !RETURN_SUCCESS Error.
+
+**/
+RETURN_STATUS
+InitializeUsb3DebugPort (
+ USB3_DEBUG_PORT_HANDLE *Handle
+ );
+
+/**
+ Return XHCI MMIO base address.
+
+**/
+EFI_PHYSICAL_ADDRESS
+GetXhciBaseAddress (
+ VOID
+ );
+
+/**
+ Verifies if the bit positions specified by a mask are set in a register.
+
+ @param[in, out] Register UNITN register
+ @param[in] BitMask 32-bit mask
+
+ @return BOOLEAN - TRUE if all bits specified by the mask are enabled.
+ - FALSE even if one of the bits specified by the mask
+ is not enabled.
+**/
+BOOLEAN
+XhcIsBitSet(
+ UINTN Register,
+ UINT32 BitMask
+ );
+
+/**
+ Sets bits as per the enabled bit positions in the mask.
+
+ @param[in, out] Register UINTN register
+ @param[in] BitMask 32-bit mask
+**/
+VOID
+XhcSetR32Bit(
+ UINTN Register,
+ UINT32 BitMask
+ );
+
+/**
+ Clears bits as per the enabled bit positions in the mask.
+
+ @param[in, out] Register UINTN register
+ @param[in] BitMask 32-bit mask
+**/
+VOID
+XhcClearR32Bit(
+ IN OUT UINTN Register,
+ IN UINT32 BitMask
+ );
+
+/**
+ Initialize USB3 debug port.
+
+ This method invokes various internal functions to facilitate
+ detection and initialization of USB3 debug port.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+**/
+RETURN_STATUS
+EFIAPI
+USB3Initialize (
+ VOID
+ );
+
+/**
+ Return command register value in XHCI controller.
+
+**/
+UINT16
+GetXhciPciCommand (
+ VOID
+ );
+
+/**
+ Allocate aligned memory for XHC's usage.
+
+ @param BufferSize The size, in bytes, of the Buffer.
+
+ @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID*
+AllocateAlignBuffer (
+ IN UINTN BufferSize
+ );
+
+/**
+ The real function to initialize USB3 debug port.
+
+ This method invokes various internal functions to facilitate
+ detection and initialization of USB3 debug port.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+**/
+RETURN_STATUS
+EFIAPI
+USB3InitializeReal (
+ VOID
+ );
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param Handle The instance of debug device.
+ @param Direction The direction of data transfer.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param Timeout Indicates the maximum time, in millisecond, which
+ the transfer is allowed to complete.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcDataTransfer (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout
+ );
+
+/**
+ Check if the timer is timeout.
+
+ @param[in] UsbDebugPortHandle Pointer to USB Debug port handle
+ @param[in] Timer The start timer from the begin.
+ @param[in] TimeoutTicker Ticker number need time out.
+
+ @return TRUE Timer time out occurs.
+ @retval FALSE Timer does not time out.
+
+**/
+BOOLEAN
+IsTimerTimeout (
+ IN USB3_DEBUG_PORT_HANDLE *UsbDebugPortHandle,
+ IN UINT64 Timer,
+ IN UINT64 TimeoutTicker
+ );
+
+#endif //__SERIAL_PORT_LIB_USB__
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.c new file mode 100644 index 0000000000..be3174e75f --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.c @@ -0,0 +1,45 @@ +/** @file
+ Debug Port Library implementation based on usb3 debug port.
+
+ Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiPei.h>
+#include <Library/PeiServicesLib.h>
+#include "DebugCommunicationLibUsb3Internal.h"
+
+/**
+ Allocate aligned memory for XHC's usage.
+
+ @param BufferSize The size, in bytes, of the Buffer.
+
+ @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID*
+AllocateAlignBuffer (
+ IN UINTN BufferSize
+ )
+{
+ VOID *Buf;
+ EFI_PHYSICAL_ADDRESS Address;
+ EFI_STATUS Status;
+
+ Buf = NULL;
+ Status = PeiServicesAllocatePages (EfiACPIMemoryNVS, EFI_SIZE_TO_PAGES (BufferSize), &Address);
+ if (EFI_ERROR (Status)) {
+ Buf = NULL;
+ } else {
+ Buf = (VOID *)(UINTN) Address;
+ }
+ return Buf;
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.inf b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.inf new file mode 100644 index 0000000000..24cd4a0b5e --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.inf @@ -0,0 +1,70 @@ +## @file
+# Debug Communication Library instance based on usb3 debug port.
+#
+# Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DebugCommunicationLibUsb3Pei
+ MODULE_UNI_FILE = DebugCommunicationLibUsb3Pei.uni
+ FILE_GUID = 106C877F-C2BA-4c46-876C-BDFE6171CD7E
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = DebugCommunicationLib|PEIM PEI_CORE
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF
+#
+
+[Sources]
+ DebugCommunicationLibUsb3Pei.c
+ DebugCommunicationLibUsb3Transfer.c
+ DebugCommunicationLibUsb3Common.c
+ DebugCommunicationLibUsb3Internal.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ IntelFrameworkPkg/IntelFrameworkPkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[Pcd]
+ ## The memory BAR of ehci host controller, in which usb debug feature is enabled.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciMemorySpaceBase ## SOMETIMES_CONSUMES
+
+ ## The pci address of ehci host controller, in which usb debug feature is enabled.
+ ## The format of pci address please refer to SourceLevelDebugPkg.dec
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciPciAddress ## CONSUMES
+
+ ## Per XHCI spec, software shall impose a timeout between the detection of the Debug Host
+ ## connection and the DbC Run transition to 1. This PCD specifies the timeout value in microsecond.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciDebugDetectTimeout ## SOMETIMES_CONSUMES
+
+ ## The value of data buffer size used for USB debug port handle.
+ ## It should be equal to sizeof (USB3_DEBUG_PORT_HANDLE).
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugPortHandleBufferSize|256 ## SOMETIMES_CONSUMES
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ IoLib
+ PciLib
+ TimerLib
+ BaseMemoryLib
+ PeiServicesLib
+
+[Depex.common.PEIM]
+ gEfiPeiMemoryDiscoveredPpiGuid
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.uni b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.uni Binary files differnew file mode 100644 index 0000000000..074b686004 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.uni diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Transfer.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Transfer.c new file mode 100644 index 0000000000..73963e1199 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Transfer.c @@ -0,0 +1,606 @@ +/** @file
+ Debug Port Library implementation based on usb3 debug port.
+
+ Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include "DebugCommunicationLibUsb3Internal.h"
+
+/**
+ Synchronize the specified transfer ring to update the enqueue and dequeue pointer.
+
+ @param Handle Debug port handle.
+ @param TrsRing The transfer ring to sync.
+
+ @retval EFI_SUCCESS The transfer ring is synchronized successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcSyncTrsRing (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN TRANSFER_RING *TrsRing
+ )
+{
+ UINTN Index;
+ TRB_TEMPLATE *TrsTrb;
+ UINT32 CycleBit;
+
+ ASSERT (TrsRing != NULL);
+
+ //
+ // Calculate the latest RingEnqueue and RingPCS
+ //
+ TrsTrb = (TRB_TEMPLATE *)(UINTN) TrsRing->RingEnqueue;
+
+ ASSERT (TrsTrb != NULL);
+
+ for (Index = 0; Index < TrsRing->TrbNumber; Index++) {
+ if (TrsTrb->CycleBit != (TrsRing->RingPCS & BIT0)) {
+ break;
+ }
+ TrsTrb++;
+ if ((UINT8) TrsTrb->Type == TRB_TYPE_LINK) {
+ ASSERT (((LINK_TRB*)TrsTrb)->TC != 0);
+ //
+ // set cycle bit in Link TRB as normal
+ //
+ ((LINK_TRB*)TrsTrb)->CycleBit = TrsRing->RingPCS & BIT0;
+ //
+ // Toggle PCS maintained by software
+ //
+ TrsRing->RingPCS = (TrsRing->RingPCS & BIT0) ? 0 : 1;
+ TrsTrb = (TRB_TEMPLATE *)(UINTN)((TrsTrb->Parameter1 | LShiftU64 ((UINT64)TrsTrb->Parameter2, 32)) & ~0x0F);
+ }
+ }
+ ASSERT (Index != TrsRing->TrbNumber);
+
+ if ((EFI_PHYSICAL_ADDRESS)(UINTN) TrsTrb != TrsRing->RingEnqueue) {
+ TrsRing->RingEnqueue = (EFI_PHYSICAL_ADDRESS)(UINTN) TrsTrb;
+ }
+
+ //
+ // Clear the Trb context for enqueue, but reserve the PCS bit which indicates free Trb.
+ //
+ CycleBit = TrsTrb->CycleBit;
+ ZeroMem (TrsTrb, sizeof (TRB_TEMPLATE));
+ TrsTrb->CycleBit = CycleBit;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Synchronize the specified event ring to update the enqueue and dequeue pointer.
+
+ @param Handle Debug port handle.
+ @param EvtRing The event ring to sync.
+
+ @retval EFI_SUCCESS The event ring is synchronized successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcSyncEventRing (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN EVENT_RING *EvtRing
+ )
+{
+ UINTN Index;
+ TRB_TEMPLATE *EvtTrb1;
+
+ ASSERT (EvtRing != NULL);
+
+ //
+ // Calculate the EventRingEnqueue and EventRingCCS.
+ // Note: only support single Segment
+ //
+ EvtTrb1 = (TRB_TEMPLATE *)(UINTN) EvtRing->EventRingDequeue;
+
+ for (Index = 0; Index < EvtRing->TrbNumber; Index++) {
+ if (EvtTrb1->CycleBit != EvtRing->EventRingCCS) {
+ break;
+ }
+
+ EvtTrb1++;
+
+ if ((UINTN)EvtTrb1 >= ((UINTN) EvtRing->EventRingSeg0 + sizeof (TRB_TEMPLATE) * EvtRing->TrbNumber)) {
+ EvtTrb1 = (TRB_TEMPLATE *)(UINTN) EvtRing->EventRingSeg0;
+ EvtRing->EventRingCCS = (EvtRing->EventRingCCS) ? 0 : 1;
+ }
+ }
+
+ if (Index < EvtRing->TrbNumber) {
+ EvtRing->EventRingEnqueue = (EFI_PHYSICAL_ADDRESS)(UINTN)EvtTrb1;
+ } else {
+ ASSERT (FALSE);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Check if there is a new generated event.
+
+ @param Handle Debug port handle.
+ @param EvtRing The event ring to check.
+ @param NewEvtTrb The new event TRB found.
+
+ @retval EFI_SUCCESS Found a new event TRB at the event ring.
+ @retval EFI_NOT_READY The event ring has no new event.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcCheckNewEvent (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN EVENT_RING *EvtRing,
+ OUT TRB_TEMPLATE **NewEvtTrb
+ )
+{
+ EFI_STATUS Status;
+ TRB_TEMPLATE *EvtTrb;
+
+ ASSERT (EvtRing != NULL);
+
+ EvtTrb = (TRB_TEMPLATE *)(UINTN) EvtRing->EventRingDequeue;
+ *NewEvtTrb = (TRB_TEMPLATE *)(UINTN) EvtRing->EventRingDequeue;
+
+ if (EvtRing->EventRingDequeue == EvtRing->EventRingEnqueue) {
+ return EFI_NOT_READY;
+ }
+
+ Status = EFI_SUCCESS;
+
+ EvtRing->EventRingDequeue += sizeof (TRB_TEMPLATE);
+ //
+ // If the dequeue pointer is beyond the ring, then roll-back it to the begining of the ring.
+ //
+ if ((UINTN)EvtRing->EventRingDequeue >= ((UINTN) EvtRing->EventRingSeg0 + sizeof (TRB_TEMPLATE) * EvtRing->TrbNumber)) {
+ EvtRing->EventRingDequeue = EvtRing->EventRingSeg0;
+ }
+
+ return Status;
+}
+
+/**
+ Check if the Trb is a transaction of the URB.
+
+ @param Ring The transfer ring to be checked.
+ @param Trb The TRB to be checked.
+
+ @retval TRUE It is a transaction of the URB.
+ @retval FALSE It is not any transaction of the URB.
+
+**/
+BOOLEAN
+IsTrbInTrsRing (
+ IN TRANSFER_RING *Ring,
+ IN TRB_TEMPLATE *Trb
+ )
+{
+ TRB_TEMPLATE *CheckedTrb;
+ UINTN Index;
+
+ CheckedTrb = (TRB_TEMPLATE *)(UINTN) Ring->RingSeg0;
+
+ ASSERT (Ring->TrbNumber == TR_RING_TRB_NUMBER);
+
+ for (Index = 0; Index < Ring->TrbNumber; Index++) {
+ if (Trb == CheckedTrb) {
+ return TRUE;
+ }
+ CheckedTrb++;
+ }
+
+ return FALSE;
+}
+
+/**
+ Check the URB's execution result and update the URB's
+ result accordingly.
+
+ @param Handle Debug port handle.
+ @param Urb The URB to check result.
+
+**/
+VOID
+XhcCheckUrbResult (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN URB *Urb
+ )
+{
+ EVT_TRB_TRANSFER *EvtTrb;
+ TRB_TEMPLATE *TRBPtr;
+ UINTN Index;
+ EFI_STATUS Status;
+ URB *CheckedUrb;
+ UINT64 XhcDequeue;
+ UINT32 High;
+ UINT32 Low;
+
+ ASSERT ((Handle != NULL) && (Urb != NULL));
+
+ if (Urb->Finished) {
+ goto EXIT;
+ }
+
+ EvtTrb = NULL;
+
+ //
+ // Traverse the event ring to find out all new events from the previous check.
+ //
+ XhcSyncEventRing (Handle, &Handle->EventRing);
+
+ for (Index = 0; Index < Handle->EventRing.TrbNumber; Index++) {
+
+ Status = XhcCheckNewEvent (Handle, &Handle->EventRing, ((TRB_TEMPLATE **)&EvtTrb));
+ if (Status == EFI_NOT_READY) {
+ //
+ // All new events are handled, return directly.
+ //
+ goto EXIT;
+ }
+
+ if ((EvtTrb->Type != TRB_TYPE_COMMAND_COMPLT_EVENT) && (EvtTrb->Type != TRB_TYPE_TRANS_EVENT)) {
+ continue;
+ }
+
+ TRBPtr = (TRB_TEMPLATE *)(UINTN)(EvtTrb->TRBPtrLo | LShiftU64 ((UINT64) EvtTrb->TRBPtrHi, 32));
+
+ if (IsTrbInTrsRing ((TRANSFER_RING *)(UINTN)(Urb->Ring), TRBPtr)) {
+ CheckedUrb = Urb;
+ } else if (IsTrbInTrsRing ((TRANSFER_RING *)(UINTN)(Handle->UrbIn.Ring), TRBPtr)) {
+ //
+ // If it is read event and it should be generated by poll, and current operation is write, we need save data into internal buffer.
+ // Internal buffer is used by next read.
+ //
+ Handle->DataCount = (UINT8) (Handle->UrbIn.DataLen - EvtTrb->Length);
+ CopyMem (Handle->Data, (VOID *)(UINTN)Handle->UrbIn.Data, Handle->DataCount);
+ //
+ // Fill this TRB complete with CycleBit, otherwise next read will fail with old TRB.
+ //
+ TRBPtr->CycleBit = (TRBPtr->CycleBit & BIT0) ? 0 : 1;
+ continue;
+ } else {
+ continue;
+ }
+
+ if ((EvtTrb->Completecode == TRB_COMPLETION_SHORT_PACKET) ||
+ (EvtTrb->Completecode == TRB_COMPLETION_SUCCESS)) {
+ //
+ // The length of data which were transferred.
+ //
+ CheckedUrb->Completed += (CheckedUrb->DataLen - EvtTrb->Length);
+ } else {
+ CheckedUrb->Result |= EFI_USB_ERR_TIMEOUT;
+ }
+ //
+ // This Urb has been processed
+ //
+ CheckedUrb->Finished = TRUE;
+ }
+
+EXIT:
+ //
+ // Advance event ring to last available entry
+ //
+ // Some 3rd party XHCI external cards don't support single 64-bytes width register access,
+ // So divide it to two 32-bytes width register access.
+ //
+ Low = XhcReadDebugReg (Handle, XHC_DC_DCERDP);
+ High = XhcReadDebugReg (Handle, XHC_DC_DCERDP + 4);
+ XhcDequeue = (UINT64)(LShiftU64((UINT64)High, 32) | Low);
+
+ if ((XhcDequeue & (~0x0F)) != ((UINT64)(UINTN)Handle->EventRing.EventRingDequeue & (~0x0F))) {
+ //
+ // Some 3rd party XHCI external cards don't support single 64-bytes width register access,
+ // So divide it to two 32-bytes width register access.
+ //
+ XhcWriteDebugReg (Handle, XHC_DC_DCERDP, XHC_LOW_32BIT (Handle->EventRing.EventRingDequeue));
+ XhcWriteDebugReg (Handle, XHC_DC_DCERDP + 4, XHC_HIGH_32BIT (Handle->EventRing.EventRingDequeue));
+ }
+}
+
+/**
+ Ring the door bell to notify XHCI there is a transaction to be executed.
+
+ @param Handle Debug port handle.
+ @param Urb The pointer to URB.
+
+ @retval EFI_SUCCESS Successfully ring the door bell.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcRingDoorBell (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN URB *Urb
+ )
+{
+ UINT32 Dcdb;
+
+ //
+ // 7.6.8.2 DCDB Register
+ //
+ Dcdb = (Urb->Direction == EfiUsbDataIn) ? 0x100 : 0x0;
+
+ XhcWriteDebugReg (
+ Handle,
+ XHC_DC_DCDB,
+ Dcdb
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Execute the transfer by polling the URB. This is a synchronous operation.
+
+ @param Handle Debug port handle.
+ @param Urb The URB to execute.
+ @param Timeout The time to wait before abort, in microsecond.
+
+**/
+VOID
+XhcExecTransfer (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN URB *Urb,
+ IN UINTN Timeout
+ )
+{
+ TRANSFER_RING *Ring;
+ UINT64 Begin;
+ UINT64 TimeoutTicker;
+ UINT64 TimerRound;
+ TRB_TEMPLATE *Trb;
+
+ Begin = 0;
+ TimeoutTicker = 0;
+ TimerRound = 0;
+
+ XhcRingDoorBell (Handle, Urb);
+
+ if (Timeout != 0) {
+ Begin = GetPerformanceCounter ();
+ TimeoutTicker = DivU64x32 (
+ MultU64x64 (
+ Handle->TimerFrequency,
+ Timeout
+ ),
+ 1000000u
+ );
+ TimerRound = DivU64x64Remainder (
+ TimeoutTicker,
+ DivU64x32 (Handle->TimerCycle, 2),
+ &TimeoutTicker
+ );
+ }
+
+ //
+ // Event Ring Not Empty bit can only be set to 1 by XHC after ringing door bell with some delay.
+ //
+ while (TRUE) {
+ if (Timeout != 0) {
+ if (TimerRound == 0) {
+ if (IsTimerTimeout (Handle, Begin, TimeoutTicker)) {
+ //
+ // If time out occurs.
+ //
+ Urb->Result |= EFI_USB_ERR_TIMEOUT;
+ break;
+ }
+ } else {
+ if (IsTimerTimeout (Handle, Begin, DivU64x32 (Handle->TimerCycle, 2))) {
+ TimerRound --;
+ }
+ }
+ }
+ XhcCheckUrbResult (Handle, Urb);
+ if (Urb->Finished) {
+ break;
+ }
+ }
+
+ //
+ // If URB transfer is error, restore transfer ring to original value before URB transfer
+ // This will make the current transfer TRB is always at the latest unused one in transfer ring.
+ //
+ Ring = (TRANSFER_RING *)(UINTN) Urb->Ring;
+ if ((Urb->Result != EFI_USB_NOERROR) && (Urb->Direction == EfiUsbDataIn)) {
+ //
+ // Adjust Enqueue pointer
+ //
+ Ring->RingEnqueue = Urb->Trb;
+ //
+ // Clear CCS flag for next use
+ //
+ Trb = (TRB_TEMPLATE *)(UINTN) Urb->Trb;
+ Trb->CycleBit = ((~Ring->RingPCS) & BIT0);
+ } else {
+ //
+ // Update transfer ring for next transfer.
+ //
+ XhcSyncTrsRing (Handle, Ring);
+ }
+}
+
+/**
+ Create a transfer TRB.
+
+ @param Handle Debug port handle.
+ @param Urb The urb used to construct the transfer TRB.
+
+ @return Created TRB or NULL
+
+**/
+EFI_STATUS
+XhcCreateTransferTrb (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN URB *Urb
+ )
+{
+ TRANSFER_RING *EPRing;
+ TRB *Trb;
+
+ if (Urb->Direction == EfiUsbDataIn) {
+ EPRing = &Handle->TransferRingIn;
+ } else {
+ EPRing = &Handle->TransferRingOut;
+ }
+
+ Urb->Ring = (EFI_PHYSICAL_ADDRESS)(UINTN) EPRing;
+ XhcSyncTrsRing (Handle, EPRing);
+
+ Urb->Trb = EPRing->RingEnqueue;
+ Trb = (TRB *)(UINTN)EPRing->RingEnqueue;
+ Trb = (TRB *)(UINTN)EPRing->RingEnqueue;
+ Trb->TrbNormal.TRBPtrLo = XHC_LOW_32BIT (Urb->Data);
+ Trb->TrbNormal.TRBPtrHi = XHC_HIGH_32BIT (Urb->Data);
+ Trb->TrbNormal.Length = Urb->DataLen;
+ Trb->TrbNormal.TDSize = 0;
+ Trb->TrbNormal.IntTarget = 0;
+ Trb->TrbNormal.ISP = 1;
+ Trb->TrbNormal.IOC = 1;
+ Trb->TrbNormal.Type = TRB_TYPE_NORMAL;
+
+ //
+ // Update the cycle bit to indicate this TRB has been consumed.
+ //
+ Trb->TrbNormal.CycleBit = EPRing->RingPCS & BIT0;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Create a new URB for a new transaction.
+
+ @param Handle Debug port handle.
+ @param Direction The direction of data flow.
+ @param Data The user data to transfer
+ @param DataLen The length of data buffer
+
+ @return Created URB or NULL
+
+**/
+URB*
+XhcCreateUrb (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN VOID *Data,
+ IN UINTN DataLen
+ )
+{
+ EFI_STATUS Status;
+ URB *Urb;
+ EFI_PHYSICAL_ADDRESS UrbData;
+
+ if (Direction == EfiUsbDataIn) {
+ Urb = &Handle->UrbIn;
+ } else {
+ Urb = &Handle->UrbOut;
+ }
+
+ UrbData = Urb->Data;
+
+ ZeroMem (Urb, sizeof (URB));
+ Urb->Direction = Direction;
+
+ //
+ // Allocate memory to move data from CAR or SMRAM to normal memory
+ // to make XHCI DMA successfully
+ // re-use the pre-allocate buffer in PEI to avoid DXE memory service or gBS are not ready
+ //
+ Urb->Data = UrbData;
+
+ if (Direction == EfiUsbDataIn) {
+ //
+ // Do not break URB data in buffer as it may contain the data which were just put in via DMA by XHC
+ //
+ Urb->DataLen = (UINT32) DataLen;
+ } else {
+ //
+ // Put data into URB data out buffer which will create TRBs
+ //
+ ZeroMem ((VOID*)(UINTN) Urb->Data, DataLen);
+ CopyMem ((VOID*)(UINTN) Urb->Data, Data, DataLen);
+ Urb->DataLen = (UINT32) DataLen;
+ }
+
+ Status = XhcCreateTransferTrb (Handle, Urb);
+ ASSERT_EFI_ERROR (Status);
+
+ return Urb;
+}
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param Handle Debug port handle.
+ @param Direction The direction of data transfer.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param Timeout Indicates the maximum time, in microsecond, which
+ the transfer is allowed to complete.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcDataTransfer (
+ IN USB3_DEBUG_PORT_HANDLE *Handle,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout
+ )
+{
+ URB *Urb;
+ EFI_STATUS Status;
+
+ //
+ // Validate the parameters
+ //
+ if ((DataLength == NULL) || (*DataLength == 0) || (Data == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Create a new URB, insert it into the asynchronous
+ // schedule list, then poll the execution status.
+ //
+ Urb = XhcCreateUrb (Handle, Direction, Data, *DataLength);
+ ASSERT (Urb != NULL);
+
+ XhcExecTransfer (Handle, Urb, Timeout);
+
+ *DataLength = Urb->Completed;
+
+ Status = EFI_TIMEOUT;
+ if (Urb->Result == EFI_USB_NOERROR) {
+ Status = EFI_SUCCESS;
+ }
+
+ if (Direction == EfiUsbDataIn) {
+ //
+ // Move data from internal buffer to outside buffer (outside buffer may be in SMRAM...)
+ // SMRAM does not allow to do DMA, so we create an internal buffer.
+ //
+ CopyMem (Data, (VOID *)(UINTN)Urb->Data, *DataLength);
+ }
+
+ return Status;
+}
+
diff --git a/SourceLevelDebugPkg/SourceLevelDebugPkg.dec b/SourceLevelDebugPkg/SourceLevelDebugPkg.dec index 5c28e2934e..e634ca7638 100644 --- a/SourceLevelDebugPkg/SourceLevelDebugPkg.dec +++ b/SourceLevelDebugPkg/SourceLevelDebugPkg.dec @@ -91,5 +91,27 @@ # @Prompt Assign debug port buffer size.
gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugPortHandleBufferSize|0x0|UINT16|0x00000006
+ ## The memory BAR of xhci host controller, in which usb debug feature is enabled.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ # @Prompt Configure ehci host controller memory BAR.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciMemorySpaceBase|0xD0000000|UINT64|0x00000007
+
+ ## The pci address of xhci host controller, in which usb debug feature is enabled.
+ # The format of pci address is :<BR>
+ # -----------------------------------------------------------------------<BR>
+ # | Bits 28..31 | Bits 20..27 | Bits 15..19 | Bits 12..14 | Bits 00..11 |<BR>
+ # -----------------------------------------------------------------------<BR>
+ # | 0 | Bus | Device | Function | 0 |<BR>
+ # -----------------------------------------------------------------------<BR>
+ # For the value 0x000A0000, it means the pci address at bus 0x0, device 0x14, function 0x0.
+ # @Prompt Configure xhci host controller pci address.
+ # @Expression 0x80000001 | (gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciPciAddress & 0xF0000FFF) == 0
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciPciAddress|0x000A0000|UINT32|0x00000008
+
+ ## Per XHCI spec, software shall impose a timeout between the detection of the Debug Host
+ ## connection and the DbC Run transition to 1. This PCD specifies the timeout value in microsecond.
+ # @Prompt Configure debug device detection timeout value.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbXhciDebugDetectTimeout|3000000|UINT64|0x00000009
+
[UserExtensions.TianoCore."ExtraFiles"]
SourceLevelDebugPkgExtra.uni
diff --git a/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc b/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc index a7be9ad51c..7f17cd37c1 100644 --- a/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc +++ b/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc @@ -51,8 +51,10 @@ !ifdef $(SOURCE_DEBUG_USE_USB)
DebugCommunicationLib|SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.inf
!else
+!ifndef $(SOURCE_DEBUG_USE_USB3)
DebugCommunicationLib|SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.inf
!endif
+!endif
[LibraryClasses.common.PEIM]
PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
@@ -61,6 +63,9 @@ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
DebugAgentLib|SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgentLib.inf
+!ifdef $(SOURCE_DEBUG_USE_USB3)
+ DebugCommunicationLib|SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Pei.inf
+!endif
[LibraryClasses.common.DXE_DRIVER]
UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
@@ -71,6 +76,9 @@ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
DebugAgentLib|SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf
+!ifdef $(SOURCE_DEBUG_USE_USB3)
+ DebugCommunicationLib|SourceLevelDebugPkg/Library/DebugCommunicationLibUsb3/DebugCommunicationLibUsb3Dxe.inf
+!endif
###################################################################################################
#
|