summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authoroliviermartin <oliviermartin@6f19259b-4bc3-4df7-8a09-765794883524>2011-09-22 22:59:52 +0000
committeroliviermartin <oliviermartin@6f19259b-4bc3-4df7-8a09-765794883524>2011-09-22 22:59:52 +0000
commit55a0d64b883bf8cc4db2a7890e29528ec57a2884 (patch)
treea316cdc9c00dfc821498eaf1d8d9fa1aabc6397d
parent75e4db2d3bb063e767f94c78259760755eedbaff (diff)
downloadedk2-platforms-55a0d64b883bf8cc4db2a7890e29528ec57a2884.tar.xz
ArmPkg: Renamed library 'PL390GicLib' into 'ArmGicLib'
This library is the interface for the ARM Generic Interrupt Controller Architecture Specification. ARM Platform can use any GIC controller (not necessary PL390 GIC). git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12411 6f19259b-4bc3-4df7-8a09-765794883524
-rw-r--r--ArmPkg/ArmPkg.dsc5
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390Gic.c71
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390GicDxe.c46
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf4
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390GicLib.inf (renamed from ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf)7
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390GicNonSec.c64
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390GicSec.c95
-rw-r--r--ArmPkg/Drivers/PL390Gic/PL390GicSecLib.inf (renamed from ArmPkg/Drivers/PL390Gic/PL390GicSec.inf)7
-rw-r--r--ArmPkg/Include/Drivers/PL390Gic.h120
-rw-r--r--ArmPkg/Include/Library/ArmGicLib.h126
-rw-r--r--ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A8.dsc5
-rw-r--r--ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A9x2.dsc8
-rw-r--r--ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.dsc7
-rwxr-xr-xArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.c6
-rwxr-xr-xArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf2
-rw-r--r--ArmPlatformPkg/PrePeiCore/MainMPCore.c12
-rw-r--r--ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf2
-rw-r--r--ArmPlatformPkg/PrePi/MainMPCore.c10
-rwxr-xr-xArmPlatformPkg/PrePi/PeiMPCore.inf2
-rw-r--r--ArmPlatformPkg/Sec/Sec.c18
-rw-r--r--ArmPlatformPkg/Sec/Sec.inf2
21 files changed, 292 insertions, 327 deletions
diff --git a/ArmPkg/ArmPkg.dsc b/ArmPkg/ArmPkg.dsc
index e3c1d6f757..0193621219 100644
--- a/ArmPkg/ArmPkg.dsc
+++ b/ArmPkg/ArmPkg.dsc
@@ -120,6 +120,7 @@
ArmPkg/Drivers/CpuDxe/CpuDxe.inf
ArmPkg/Drivers/CpuPei/CpuPei.inf
ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
- ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
- ArmPkg/Drivers/PL390Gic/PL390GicSec.inf
+ ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
+ ArmPkg/Drivers/PL390Gic/PL390GicSecLib.inf
+
ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
diff --git a/ArmPkg/Drivers/PL390Gic/PL390Gic.c b/ArmPkg/Drivers/PL390Gic/PL390Gic.c
new file mode 100644
index 0000000000..9da5cc4b59
--- /dev/null
+++ b/ArmPkg/Drivers/PL390Gic/PL390Gic.c
@@ -0,0 +1,71 @@
+/** @file
+*
+* Copyright (c) 2011, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Uefi.h>
+#include <Library/IoLib.h>
+#include <Library/ArmGicLib.h>
+
+VOID
+EFIAPI
+ArmGicSendSgiTo (
+ IN INTN GicDistributorBase,
+ IN INTN TargetListFilter,
+ IN INTN CPUTargetList
+ )
+{
+ MmioWrite32 (GicDistributorBase + ARM_GIC_ICDSGIR, ((TargetListFilter & 0x3) << 24) | ((CPUTargetList & 0xFF) << 16));
+}
+
+UINT32
+EFIAPI
+ArmGicAcknowledgeSgiFrom (
+ IN INTN GicInterruptInterfaceBase,
+ IN INTN CoreId
+ )
+{
+ INTN InterruptId;
+
+ InterruptId = MmioRead32 (GicInterruptInterfaceBase + ARM_GIC_ICCIAR);
+
+ // Check if the Interrupt ID is valid, The read from Interrupt Ack register returns CPU ID and Interrupt ID
+ if (((CoreId & 0x7) << 10) == (InterruptId & 0x1C00)) {
+ // Got SGI number 0 hence signal End of Interrupt by writing to ICCEOIR
+ MmioWrite32 (GicInterruptInterfaceBase + ARM_GIC_ICCEIOR, InterruptId);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+UINT32
+EFIAPI
+ArmGicAcknowledgeSgi2From (
+ IN INTN GicInterruptInterfaceBase,
+ IN INTN CoreId,
+ IN INTN SgiId
+ )
+{
+ INTN InterruptId;
+
+ InterruptId = MmioRead32(GicInterruptInterfaceBase + ARM_GIC_ICCIAR);
+
+ // Check if the Interrupt ID is valid, The read from Interrupt Ack register returns CPU ID and Interrupt ID
+ if((((CoreId & 0x7) << 10) | (SgiId & 0x3FF)) == (InterruptId & 0x1FFF)) {
+ // Got SGI number 0 hence signal End of Interrupt by writing to ICCEOIR
+ MmioWrite32 (GicInterruptInterfaceBase + ARM_GIC_ICCEIOR, InterruptId);
+ return 1;
+ } else {
+ return 0;
+ }
+}
diff --git a/ArmPkg/Drivers/PL390Gic/PL390GicDxe.c b/ArmPkg/Drivers/PL390Gic/PL390GicDxe.c
index 02853a2f31..d352dcaee0 100644
--- a/ArmPkg/Drivers/PL390Gic/PL390GicDxe.c
+++ b/ArmPkg/Drivers/PL390Gic/PL390GicDxe.c
@@ -29,25 +29,24 @@ Abstract:
#include <Library/UefiLib.h>
#include <Library/PcdLib.h>
#include <Library/IoLib.h>
+#include <Library/ArmGicLib.h>
#include <Protocol/Cpu.h>
#include <Protocol/HardwareInterrupt.h>
-#include <Drivers/PL390Gic.h>
-
// number of 32-bit registers needed to represent those interrupts as a bit
// (used for enable set, enable clear, pending set, pending clear, and active regs)
-#define GIC_NUM_REG_PER_INT_BITS (PcdGet32(PcdGicNumInterrupts) / 32)
+#define ARM_GIC_NUM_REG_PER_INT_BITS (PcdGet32(PcdGicNumInterrupts) / 32)
// number of 32-bit registers needed to represent those interrupts as two bits
// (used for configuration reg)
-#define GIC_NUM_REG_PER_INT_CFG (PcdGet32(PcdGicNumInterrupts) / 16)
+#define ARM_GIC_NUM_REG_PER_INT_CFG (PcdGet32(PcdGicNumInterrupts) / 16)
// number of 32-bit registers needed to represent interrupts as 8-bit priority field
// (used for priority regs)
-#define GIC_NUM_REG_PER_INT_BYTES (PcdGet32(PcdGicNumInterrupts) / 4)
+#define ARM_GIC_NUM_REG_PER_INT_BYTES (PcdGet32(PcdGicNumInterrupts) / 4)
-#define GIC_DEFAULT_PRIORITY 0x80
+#define ARM_GIC_DEFAULT_PRIORITY 0x80
extern EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol;
@@ -130,7 +129,7 @@ EnableInterruptSource (
RegShift = Source % 32;
// write set-enable register
- MmioWrite32 (PcdGet32(PcdGicDistributorBase) + GIC_ICDISER + (4*RegOffset), 1 << RegShift);
+ MmioWrite32 (PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDISER + (4*RegOffset), 1 << RegShift);
return EFI_SUCCESS;
}
@@ -165,7 +164,7 @@ DisableInterruptSource (
RegShift = Source % 32;
// Write set-enable register
- MmioWrite32 (PcdGet32(PcdGicDistributorBase) + GIC_ICDICER + (4*RegOffset), 1 << RegShift);
+ MmioWrite32 (PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDICER + (4*RegOffset), 1 << RegShift);
return EFI_SUCCESS;
}
@@ -201,7 +200,7 @@ GetInterruptSourceState (
RegOffset = Source / 32;
RegShift = Source % 32;
- if ((MmioRead32 (PcdGet32(PcdGicDistributorBase) + GIC_ICDISER + (4*RegOffset)) & (1<<RegShift)) == 0) {
+ if ((MmioRead32 (PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDISER + (4*RegOffset)) & (1<<RegShift)) == 0) {
*InterruptState = FALSE;
} else {
*InterruptState = TRUE;
@@ -233,7 +232,7 @@ EndOfInterrupt (
return EFI_UNSUPPORTED;
}
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCEIOR, Source);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCEIOR, Source);
return EFI_SUCCESS;
}
@@ -258,9 +257,10 @@ IrqInterruptHandler (
UINT32 GicInterrupt;
HARDWARE_INTERRUPT_HANDLER InterruptHandler;
- GicInterrupt = MmioRead32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCIAR);
+ GicInterrupt = MmioRead32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCIAR);
+ //TODO: Comment me
if (GicInterrupt >= PcdGet32(PcdGicNumInterrupts)) {
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCEIOR, GicInterrupt);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCEIOR, GicInterrupt);
return;
}
@@ -323,11 +323,11 @@ ExitBootServicesEvent (
}
// Disable Gic Interface
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCICR, 0x0);
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCPMR, 0x0);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCICR, 0x0);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCPMR, 0x0);
// Disable Gic Distributor
- MmioWrite32 (PcdGet32(PcdGicDistributorBase) + GIC_ICDDCR, 0x0);
+ MmioWrite32 (PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDDCR, 0x0);
}
/**
@@ -363,28 +363,28 @@ InterruptDxeInitialize (
RegOffset = Index / 4;
RegShift = (Index % 4) * 8;
MmioAndThenOr32 (
- PcdGet32(PcdGicDistributorBase) + GIC_ICDIPR + (4*RegOffset),
+ PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDIPR + (4*RegOffset),
~(0xff << RegShift),
- GIC_DEFAULT_PRIORITY << RegShift
+ ARM_GIC_DEFAULT_PRIORITY << RegShift
);
}
// Configure interrupts for cpu 0
- for (Index = 0; Index < GIC_NUM_REG_PER_INT_BYTES; Index++) {
- MmioWrite32 (PcdGet32(PcdGicDistributorBase) + GIC_ICDIPTR + (Index*4), 0x01010101);
+ for (Index = 0; Index < ARM_GIC_NUM_REG_PER_INT_BYTES; Index++) {
+ MmioWrite32 (PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDIPTR + (Index*4), 0x01010101);
}
// Set binary point reg to 0x7 (no preemption)
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCBPR, 0x7);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCBPR, 0x7);
// Set priority mask reg to 0xff to allow all priorities through
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCPMR, 0xff);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCPMR, 0xff);
// Enable gic cpu interface
- MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + GIC_ICCICR, 0x1);
+ MmioWrite32 (PcdGet32(PcdGicInterruptInterfaceBase) + ARM_GIC_ICCICR, 0x1);
// Enable gic distributor
- MmioWrite32 (PcdGet32(PcdGicDistributorBase) + GIC_ICDDCR, 0x1);
+ MmioWrite32 (PcdGet32(PcdGicDistributorBase) + ARM_GIC_ICDDCR, 0x1);
ZeroMem (&gRegisteredInterruptHandlers, sizeof (gRegisteredInterruptHandlers));
diff --git a/ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf b/ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
index 3baa902a63..48ae8ba82d 100644
--- a/ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
+++ b/ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
@@ -24,7 +24,6 @@
[Sources.common]
PL390GicDxe.c
-
[Packages]
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
@@ -39,9 +38,6 @@
UefiDriverEntryPoint
IoLib
-[Guids]
-
-
[Protocols]
gHardwareInterruptProtocolGuid
gEfiCpuArchProtocolGuid
diff --git a/ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf b/ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
index f5ffd7febb..cae5c2b24c 100644
--- a/ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
+++ b/ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
@@ -13,17 +13,16 @@
[Defines]
INF_VERSION = 0x00010005
- BASE_NAME = PL390GicNonSec
+ BASE_NAME = PL390GicLib
FILE_GUID = 03d05ee4-cdeb-458c-9dfc-993f09bdf405
MODULE_TYPE = SEC
VERSION_STRING = 1.0
- LIBRARY_CLASS = PL390GicNonSecLib
+ LIBRARY_CLASS = ArmGicLib
[Sources]
+ PL390Gic.c
PL390GicNonSec.c
[Packages]
ArmPkg/ArmPkg.dec
MdePkg/MdePkg.dec
-
-[FixedPcd]
diff --git a/ArmPkg/Drivers/PL390Gic/PL390GicNonSec.c b/ArmPkg/Drivers/PL390Gic/PL390GicNonSec.c
index c2089fe846..09ef00b85f 100644
--- a/ArmPkg/Drivers/PL390Gic/PL390GicNonSec.c
+++ b/ArmPkg/Drivers/PL390Gic/PL390GicNonSec.c
@@ -14,12 +14,12 @@
#include <Uefi.h>
#include <Library/IoLib.h>
-#include <Drivers/PL390Gic.h>
+#include <Library/ArmGicLib.h>
VOID
EFIAPI
-PL390GicEnableInterruptInterface (
+ArmGicEnableInterruptInterface (
IN INTN GicInterruptInterfaceBase
)
{
@@ -27,12 +27,12 @@ PL390GicEnableInterruptInterface (
* Enable the CPU interface in Non-Secure world
* Note: The ICCICR register is banked when Security extensions are implemented
*/
- MmioWrite32 (GicInterruptInterfaceBase + GIC_ICCICR,0x00000001);
+ MmioWrite32 (GicInterruptInterfaceBase + ARM_GIC_ICCICR,0x00000001);
}
VOID
EFIAPI
-PL390GicEnableDistributor (
+ArmGicEnableDistributor (
IN INTN GicDistributorBase
)
{
@@ -40,59 +40,5 @@ PL390GicEnableDistributor (
* Enable GIC distributor in Non-Secure world.
* Note: The ICDDCR register is banked when Security extensions are implemented
*/
- MmioWrite32 (GicDistributorBase + GIC_ICDDCR, 0x00000001);
-}
-
-VOID
-EFIAPI
-PL390GicSendSgiTo (
- IN INTN GicDistributorBase,
- IN INTN TargetListFilter,
- IN INTN CPUTargetList
- )
-{
- MmioWrite32 (GicDistributorBase + GIC_ICDSGIR, ((TargetListFilter & 0x3) << 24) | ((CPUTargetList & 0xFF) << 16));
-}
-
-UINT32
-EFIAPI
-PL390GicAcknowledgeSgiFrom (
- IN INTN GicInterruptInterfaceBase,
- IN INTN CoreId
- )
-{
- INTN InterruptId;
-
- InterruptId = MmioRead32 (GicInterruptInterfaceBase + GIC_ICCIAR);
-
- // Check if the Interrupt ID is valid, The read from Interrupt Ack register returns CPU ID and Interrupt ID
- if (((CoreId & 0x7) << 10) == (InterruptId & 0x1C00)) {
- // Got SGI number 0 hence signal End of Interrupt by writing to ICCEOIR
- MmioWrite32 (GicInterruptInterfaceBase + GIC_ICCEIOR, InterruptId);
- return 1;
- } else {
- return 0;
- }
-}
-
-UINT32
-EFIAPI
-PL390GicAcknowledgeSgi2From (
- IN INTN GicInterruptInterfaceBase,
- IN INTN CoreId,
- IN INTN SgiId
- )
-{
- INTN InterruptId;
-
- InterruptId = MmioRead32(GicInterruptInterfaceBase + GIC_ICCIAR);
-
- // Check if the Interrupt ID is valid, The read from Interrupt Ack register returns CPU ID and Interrupt ID
- if((((CoreId & 0x7) << 10) | (SgiId & 0x3FF)) == (InterruptId & 0x1FFF)) {
- // Got SGI number 0 hence signal End of Interrupt by writing to ICCEOIR
- MmioWrite32 (GicInterruptInterfaceBase + GIC_ICCEIOR, InterruptId);
- return 1;
- } else {
- return 0;
- }
+ MmioWrite32 (GicDistributorBase + ARM_GIC_ICDDCR, 0x00000001);
}
diff --git a/ArmPkg/Drivers/PL390Gic/PL390GicSec.c b/ArmPkg/Drivers/PL390Gic/PL390GicSec.c
index bf4c010b70..244f9ecf2a 100644
--- a/ArmPkg/Drivers/PL390Gic/PL390GicSec.c
+++ b/ArmPkg/Drivers/PL390Gic/PL390GicSec.c
@@ -14,7 +14,7 @@
#include <Uefi.h>
#include <Library/IoLib.h>
-#include <Drivers/PL390Gic.h>
+#include <Library/ArmGicLib.h>
/*
* This function configures the all interrupts to be Non-secure.
@@ -22,114 +22,59 @@
*/
VOID
EFIAPI
-PL390GicSetupNonSecure (
+ArmGicSetupNonSecure (
IN INTN GicDistributorBase,
IN INTN GicInterruptInterfaceBase
)
{
- UINTN CachedPriorityMask = MmioRead32(GicInterruptInterfaceBase + GIC_ICCPMR);
+ UINTN CachedPriorityMask = MmioRead32(GicInterruptInterfaceBase + ARM_GIC_ICCPMR);
// Set priority Mask so that no interrupts get through to CPU
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCPMR, 0);
+ MmioWrite32(GicInterruptInterfaceBase + ARM_GIC_ICCPMR, 0);
// Check if there are any pending interrupts
- while(0 != (MmioRead32(GicDistributorBase + GIC_ICDICPR) & 0xF)) {
+ //TODO: could be extended to take Peripheral interrupts into consideration, but at the moment only SGI's are taken into consideration.
+ while(0 != (MmioRead32(GicDistributorBase + ARM_GIC_ICDICPR) & 0xF)) {
// Some of the SGI's are still pending, read Ack register and send End of Interrupt Signal
- UINTN InterruptId = MmioRead32(GicInterruptInterfaceBase + GIC_ICCIAR);
+ UINTN InterruptId = MmioRead32(GicInterruptInterfaceBase + ARM_GIC_ICCIAR);
// Write to End of interrupt signal
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCEIOR, InterruptId);
+ MmioWrite32(GicInterruptInterfaceBase + ARM_GIC_ICCEIOR, InterruptId);
}
// Ensure all GIC interrupts are Non-Secure
- MmioWrite32(GicDistributorBase + GIC_ICDISR, 0xffffffff); // IRQs 0-31 are Non-Secure : Private Peripheral Interrupt[31:16] & Software Generated Interrupt[15:0]
- MmioWrite32(GicDistributorBase + GIC_ICDISR + 4, 0xffffffff); // IRQs 32-63 are Non-Secure : Shared Peripheral Interrupt
- MmioWrite32(GicDistributorBase + GIC_ICDISR + 8, 0xffffffff); // And another 32 in case we're on the testchip : Shared Peripheral Interrupt (2)
+ MmioWrite32(GicDistributorBase + ARM_GIC_ICDISR, 0xffffffff); // IRQs 0-31 are Non-Secure : Private Peripheral Interrupt[31:16] & Software Generated Interrupt[15:0]
+ MmioWrite32(GicDistributorBase + ARM_GIC_ICDISR + 4, 0xffffffff); // IRQs 32-63 are Non-Secure : Shared Peripheral Interrupt
+ MmioWrite32(GicDistributorBase + ARM_GIC_ICDISR + 8, 0xffffffff); // And another 32 in case we're on the testchip : Shared Peripheral Interrupt (2)
// Ensure all interrupts can get through the priority mask
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCPMR, CachedPriorityMask);
+ MmioWrite32(GicInterruptInterfaceBase + ARM_GIC_ICCPMR, CachedPriorityMask);
}
VOID
EFIAPI
-PL390GicEnableInterruptInterface (
+ArmGicEnableInterruptInterface (
IN INTN GicInterruptInterfaceBase
)
{
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCPMR, 0x000000FF); /* Set Priority Mask to allow interrupts */
+ MmioWrite32(GicInterruptInterfaceBase + ARM_GIC_ICCPMR, 0x000000FF); /* Set Priority Mask to allow interrupts */
/*
* Enable CPU interface in Secure world
* Enable CPU inteface in Non-secure World
* Signal Secure Interrupts to CPU using FIQ line *
*/
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCICR,
- GIC_ICCICR_ENABLE_SECURE(1) |
- GIC_ICCICR_ENABLE_NS(1) |
- GIC_ICCICR_ACK_CTL(0) |
- GIC_ICCICR_SIGNAL_SECURE_TO_FIQ(1) |
- GIC_ICCICR_USE_SBPR(0));
+ MmioWrite32(GicInterruptInterfaceBase + ARM_GIC_ICCICR,
+ ARM_GIC_ICCICR_ENABLE_SECURE |
+ ARM_GIC_ICCICR_ENABLE_NS |
+ ARM_GIC_ICCICR_SIGNAL_SECURE_TO_FIQ);
}
VOID
EFIAPI
-PL390GicEnableDistributor (
+ArmGicEnableDistributor (
IN INTN GicDistributorBase
)
{
- MmioWrite32(GicDistributorBase + GIC_ICDDCR, 1); // turn on the GIC distributor
-}
-
-VOID
-EFIAPI
-PL390GicSendSgiTo (
- IN INTN GicDistributorBase,
- IN INTN TargetListFilter,
- IN INTN CPUTargetList
- )
-{
- MmioWrite32(GicDistributorBase + GIC_ICDSGIR, ((TargetListFilter & 0x3) << 24) | ((CPUTargetList & 0xFF) << 16));
-}
-
-UINT32
-EFIAPI
-PL390GicAcknowledgeSgiFrom (
- IN INTN GicInterruptInterfaceBase,
- IN INTN CoreId
- )
-{
- INTN InterruptId;
-
- InterruptId = MmioRead32(GicInterruptInterfaceBase + GIC_ICCIAR);
-
- // Check if the Interrupt ID is valid, The read from Interrupt Ack register returns CPU ID and Interrupt ID
- if (((CoreId & 0x7) << 10) == (InterruptId & 0x1C00)) {
- // Got SGI number 0 hence signal End of Interrupt by writing to ICCEOIR
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCEIOR, InterruptId);
- return 1;
- } else {
- return 0;
- }
-}
-
-UINT32
-EFIAPI
-PL390GicAcknowledgeSgi2From (
- IN INTN GicInterruptInterfaceBase,
- IN INTN CoreId,
- IN INTN SgiId
- )
-{
- INTN InterruptId;
-
- InterruptId = MmioRead32(GicInterruptInterfaceBase + GIC_ICCIAR);
-
- // Check if the Interrupt ID is valid, The read from Interrupt Ack register returns CPU ID and Interrupt ID
- if((((CoreId & 0x7) << 10) | (SgiId & 0x3FF)) == (InterruptId & 0x1FFF)) {
- // Got SGI number 0 hence signal End of Interrupt by writing to ICCEOIR
- MmioWrite32(GicInterruptInterfaceBase + GIC_ICCEIOR, InterruptId);
- return 1;
- } else {
- return 0;
- }
+ MmioWrite32(GicDistributorBase + ARM_GIC_ICDDCR, 1); // turn on the GIC distributor
}
diff --git a/ArmPkg/Drivers/PL390Gic/PL390GicSec.inf b/ArmPkg/Drivers/PL390Gic/PL390GicSecLib.inf
index 9cbdb6e8b3..fdec5c68d3 100644
--- a/ArmPkg/Drivers/PL390Gic/PL390GicSec.inf
+++ b/ArmPkg/Drivers/PL390Gic/PL390GicSecLib.inf
@@ -13,17 +13,16 @@
[Defines]
INF_VERSION = 0x00010005
- BASE_NAME = PL390GicSec
+ BASE_NAME = PL390GicSecLib
FILE_GUID = 85f3cf80-b5f4-11df-9855-0002a5d5c51b
MODULE_TYPE = SEC
VERSION_STRING = 1.0
- LIBRARY_CLASS = PL390GicSecLib
+ LIBRARY_CLASS = ArmGicSecLib
[Sources]
+ PL390Gic.c
PL390GicSec.c
[Packages]
ArmPkg/ArmPkg.dec
MdePkg/MdePkg.dec
-
-[FixedPcd]
diff --git a/ArmPkg/Include/Drivers/PL390Gic.h b/ArmPkg/Include/Drivers/PL390Gic.h
deleted file mode 100644
index 823e6c0200..0000000000
--- a/ArmPkg/Include/Drivers/PL390Gic.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/** @file
-*
-* Copyright (c) 2011, ARM Limited. All rights reserved.
-*
-* This program and the accompanying materials
-* are licensed and made available under the terms and conditions of the BSD License
-* which accompanies this distribution. The full text of the license may be found at
-* http://opensource.org/licenses/bsd-license.php
-*
-* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/
-
-#ifndef __PL390GIC_H
-#define __PL390GIC_H
-
-//
-// GIC definitions
-//
-
-// Distributor
-#define GIC_ICDDCR 0x000 // Distributor Control Register
-#define GIC_ICDICTR 0x004 // Interrupt Controller Type Register
-#define GIC_ICDIIDR 0x008 // Implementer Identification Register
-
-// each reg base below repeats for VE_NUM_GIC_REG_PER_INT_BITS (see GIC spec)
-#define GIC_ICDISR 0x080 // Interrupt Security Registers
-#define GIC_ICDISER 0x100 // Interrupt Set-Enable Registers
-#define GIC_ICDICER 0x180 // Interrupt Clear-Enable Registers
-#define GIC_ICDSPR 0x200 // Interrupt Set-Pending Registers
-#define GIC_ICDICPR 0x280 // Interrupt Clear-Pending Registers
-#define GIC_ICDABR 0x300 // Active Bit Registers
-
-// each reg base below repeats for VE_NUM_GIC_REG_PER_INT_BYTES
-#define GIC_ICDIPR 0x400 // Interrupt Priority Registers
-
-// each reg base below repeats for VE_NUM_GIC_INTERRUPTS
-#define GIC_ICDIPTR 0x800 // Interrupt Processor Target Registers
-#define GIC_ICDICFR 0xC00 // Interrupt Configuration Registers
-
-// just one of these
-#define GIC_ICDSGIR 0xF00 // Software Generated Interrupt Register
-
-// Cpu interface
-#define GIC_ICCICR 0x00 // CPU Interface Control Register
-#define GIC_ICCPMR 0x04 // Interrupt Priority Mask Register
-#define GIC_ICCBPR 0x08 // Binary Point Register
-#define GIC_ICCIAR 0x0C // Interrupt Acknowledge Register
-#define GIC_ICCEIOR 0x10 // End Of Interrupt Register
-#define GIC_ICCRPR 0x14 // Running Priority Register
-#define GIC_ICCPIR 0x18 // Highest Pending Interrupt Register
-#define GIC_ICCABPR 0x1C // Aliased Binary Point Register
-#define GIC_ICCIDR 0xFC // Identification Register
-
-#define GIC_ICDSGIR_FILTER_TARGETLIST 0x0
-#define GIC_ICDSGIR_FILTER_EVERYONEELSE 0x1
-#define GIC_ICDSGIR_FILTER_ITSELF 0x2
-
-//Bit-masks to configure the CPU Interface Control register
-#define GIC_ICCICR_ENABLE_SECURE(a) ((a << 0) & 0x01)
-#define GIC_ICCICR_ENABLE_NS(a) ((a << 1) & 0x02)
-#define GIC_ICCICR_ACK_CTL(a) ((a << 2) & 0x04)
-#define GIC_ICCICR_SIGNAL_SECURE_TO_FIQ(a)((a << 3) & 0x08)
-#define GIC_ICCICR_USE_SBPR(a) ((a << 4) & 0x10)
-
-
-//
-// GIC SEC interfaces
-//
-VOID
-EFIAPI
-PL390GicSetupNonSecure (
- IN INTN GicDistributorBase,
- IN INTN GicInterruptInterfaceBase
- );
-
-VOID
-EFIAPI
-PL390GicEnableInterruptInterface (
- IN INTN GicInterruptInterfaceBase
- );
-
-VOID
-EFIAPI
-PL390GicEnableDistributor (
- IN INTN GicDistributorBase
- );
-
-VOID
-EFIAPI
-PL390GicSendSgiTo (
- IN INTN GicDistributorBase,
- IN INTN TargetListFilter,
- IN INTN CPUTargetList
- );
-
-UINT32
-EFIAPI
-PL390GicAcknowledgeSgiFrom (
- IN INTN GicInterruptInterfaceBase,
- IN INTN CoreId
- );
-
-UINT32
-EFIAPI
-PL390GicAcknowledgeSgi2From (
- IN INTN GicInterruptInterfaceBase,
- IN INTN CoreId,
- IN INTN SgiId
- );
-
-UINTN
-EFIAPI
-PL390GicSetPriorityMask (
- IN INTN GicInterruptInterfaceBase,
- IN INTN PriorityMask
- );
-
-#endif
diff --git a/ArmPkg/Include/Library/ArmGicLib.h b/ArmPkg/Include/Library/ArmGicLib.h
new file mode 100644
index 0000000000..78bba23ba7
--- /dev/null
+++ b/ArmPkg/Include/Library/ArmGicLib.h
@@ -0,0 +1,126 @@
+/** @file
+*
+* Copyright (c) 2011, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __PL390GIC_H
+#define __PL390GIC_H
+
+//
+// GIC definitions
+//
+
+//
+// GIC Distributor
+//
+#define ARM_GIC_ICDDCR 0x000 // Distributor Control Register
+#define ARM_GIC_ICDICTR 0x004 // Interrupt Controller Type Register
+#define ARM_GIC_ICDIIDR 0x008 // Implementer Identification Register
+
+// Each reg base below repeats for VE_NUM_ARM_GIC_REG_PER_INT_BITS (see GIC spec)
+#define ARM_GIC_ICDISR 0x080 // Interrupt Security Registers
+#define ARM_GIC_ICDISER 0x100 // Interrupt Set-Enable Registers
+#define ARM_GIC_ICDICER 0x180 // Interrupt Clear-Enable Registers
+#define ARM_GIC_ICDSPR 0x200 // Interrupt Set-Pending Registers
+#define ARM_GIC_ICDICPR 0x280 // Interrupt Clear-Pending Registers
+#define ARM_GIC_ICDABR 0x300 // Active Bit Registers
+
+// Each reg base below repeats for VE_NUM_ARM_GIC_REG_PER_INT_BYTES
+#define ARM_GIC_ICDIPR 0x400 // Interrupt Priority Registers
+
+// Each reg base below repeats for VE_NUM_ARM_GIC_INTERRUPTS
+#define ARM_GIC_ICDIPTR 0x800 // Interrupt Processor Target Registers
+#define ARM_GIC_ICDICFR 0xC00 // Interrupt Configuration Registers
+
+#define ARM_GIC_ICDPPISR 0xD00 // PPI Status register
+
+// just one of these
+#define ARM_GIC_ICDSGIR 0xF00 // Software Generated Interrupt Register
+
+//
+// GIC Cpu interface
+//
+#define ARM_GIC_ICCICR 0x00 // CPU Interface Control Register
+#define ARM_GIC_ICCPMR 0x04 // Interrupt Priority Mask Register
+#define ARM_GIC_ICCBPR 0x08 // Binary Point Register
+#define ARM_GIC_ICCIAR 0x0C // Interrupt Acknowledge Register
+#define ARM_GIC_ICCEIOR 0x10 // End Of Interrupt Register
+#define ARM_GIC_ICCRPR 0x14 // Running Priority Register
+#define ARM_GIC_ICCPIR 0x18 // Highest Pending Interrupt Register
+#define ARM_GIC_ICCABPR 0x1C // Aliased Binary Point Register
+#define ARM_GIC_ICCIDR 0xFC // Identification Register
+
+#define ARM_GIC_ICDSGIR_FILTER_TARGETLIST 0x0
+#define ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE 0x1
+#define ARM_GIC_ICDSGIR_FILTER_ITSELF 0x2
+
+// Bit-masks to configure the CPU Interface Control register
+#define ARM_GIC_ICCICR_ENABLE_SECURE 0x01
+#define ARM_GIC_ICCICR_ENABLE_NS 0x02
+#define ARM_GIC_ICCICR_ACK_CTL 0x04
+#define ARM_GIC_ICCICR_SIGNAL_SECURE_TO_FIQ 0x08
+#define ARM_GIC_ICCICR_USE_SBPR 0x10
+
+
+//
+// GIC SEC interfaces
+//
+VOID
+EFIAPI
+ArmGicSetupNonSecure (
+ IN INTN GicDistributorBase,
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicEnableInterruptInterface (
+ IN INTN GicInterruptInterfaceBase
+ );
+
+VOID
+EFIAPI
+ArmGicEnableDistributor (
+ IN INTN GicDistributorBase
+ );
+
+VOID
+EFIAPI
+ArmGicSendSgiTo (
+ IN INTN GicDistributorBase,
+ IN INTN TargetListFilter,
+ IN INTN CPUTargetList
+ );
+
+UINT32
+EFIAPI
+ArmGicAcknowledgeSgiFrom (
+ IN INTN GicInterruptInterfaceBase,
+ IN INTN CoreId
+ );
+
+UINT32
+EFIAPI
+ArmGicAcknowledgeSgi2From (
+ IN INTN GicInterruptInterfaceBase,
+ IN INTN CoreId,
+ IN INTN SgiId
+ );
+
+UINTN
+EFIAPI
+ArmGicSetPriorityMask (
+ IN INTN GicInterruptInterfaceBase,
+ IN INTN PriorityMask
+ );
+
+#endif
diff --git a/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A8.dsc b/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A8.dsc
index a82e13f4a9..12f2cbb11c 100644
--- a/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A8.dsc
+++ b/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A8.dsc
@@ -136,7 +136,7 @@
# L2 Cache Driver
L2X0CacheLib|ArmPlatformPkg/Library/L2X0CacheLibNull/L2X0CacheLibNull.inf
# ARM PL390 General Interrupt Driver in Secure and Non-secure
- PL390GicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicSec.inf
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicSec.inf
!if $(EDK2_SKIP_PEICORE) == 1
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
@@ -441,13 +441,14 @@
!if $(EDK2_SKIP_PEICORE) == 1
ArmPlatformPkg/PrePi/PeiUniCore.inf {
<LibraryClasses>
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7Lib.inf
ArmPlatformLib|ArmPlatformPkg/ArmRealViewEbPkg/Library/ArmRealViewEbLibRTSM/ArmRealViewEbLib.inf
}
!else
ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf {
<LibraryClasses>
- PL390GicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
}
MdeModulePkg/Core/Pei/PeiMain.inf
MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
diff --git a/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A9x2.dsc b/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A9x2.dsc
index 5283b45164..1852552cd4 100644
--- a/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A9x2.dsc
+++ b/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-A9x2.dsc
@@ -115,7 +115,8 @@
# ARM PL011 UART Driver
PL011UartLib|ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf
# ARM PL390 General Interrupt Driver in Secure and Non-secure
- PL390GicNonSecLib|ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicSecLib.inf
+ ArmGicLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf
@@ -138,8 +139,6 @@
# L2 Cache Driver
L2X0CacheLib|ArmPlatformPkg/Library/L2X0CacheLibNull/L2X0CacheLibNull.inf
- # ARM PL390 General Interrupt Driver in Secure
- PL390GicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicSec.inf
!if $(EDK2_SKIP_PEICORE) == 1
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
@@ -451,13 +450,14 @@
!if $(EDK2_SKIP_PEICORE) == 1
ArmPlatformPkg/PrePi/PeiMPCore.inf {
<LibraryClasses>
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7MPCoreLib.inf
ArmPlatformLib|ArmPlatformPkg/ArmRealViewEbPkg/Library/ArmRealViewEbLibRTSM/ArmRealViewEbLib.inf
}
!else
ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf {
<LibraryClasses>
- PL390GicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
}
MdeModulePkg/Core/Pei/PeiMain.inf
MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
diff --git a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.dsc b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.dsc
index ed1c616e22..d4be10b022 100644
--- a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.dsc
+++ b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.dsc
@@ -147,8 +147,8 @@
#DebugAgentLib|EmbeddedPkg/Library/GdbDebugAgent/GdbDebugAgent.inf
# ARM PL390 General Interrupt Driver in Secure and Non-secure
- PL390GicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicSec.inf
- PL390GicNonSecLib|ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicSecLib.inf
+ ArmGicLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
!if $(EDK2_SKIP_PEICORE) == 1
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
@@ -496,13 +496,14 @@
!if $(EDK2_SKIP_PEICORE) == 1
ArmPlatformPkg/PrePi/PeiMPCore.inf {
<LibraryClasses>
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7MPCoreLib.inf
ArmPlatformLib|ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/ArmVExpressLib.inf
}
!else
ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf {
<LibraryClasses>
- PL390GicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicNonSec.inf
+ ArmGicSecLib|ArmPkg/Drivers/PL390Gic/PL390GicLib.inf
}
MdeModulePkg/Core/Pei/PeiMain.inf
MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
diff --git a/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.c b/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.c
index 469a545c0e..b9812142ed 100755
--- a/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.c
+++ b/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.c
@@ -14,12 +14,12 @@
#include <PiPei.h>
+#include <Library/ArmGicLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/PrintLib.h>
#include <Library/SerialPortLib.h>
#include <Chipset/ArmV7.h>
-#include <Drivers/PL390Gic.h>
#define ARM_PRIMARY_CORE 0
@@ -38,7 +38,7 @@ NonSecureWaitForFirmware (
ArmCallWFI();
// Acknowledge the interrupt and send End of Interrupt signal.
- PL390GicAcknowledgeSgiFrom (PcdGet32(PcdGicInterruptInterfaceBase), ARM_PRIMARY_CORE);
+ ArmGicAcknowledgeSgiFrom (PcdGet32(PcdGicInterruptInterfaceBase), ARM_PRIMARY_CORE);
// Jump to secondary core entry point.
secondary_start ();
@@ -87,7 +87,7 @@ ArmPlatformSecExtraAction (
} else if (FeaturePcdGet (PcdSystemMemoryInitializeInSec)) {
if (CoreId == ARM_PRIMARY_CORE) {
// Signal the secondary cores they can jump to PEI phase
- PL390GicSendSgiTo (PcdGet32(PcdGicDistributorBase), GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
+ ArmGicSendSgiTo (PcdGet32(PcdGicDistributorBase), ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
// To enter into Non Secure state, we need to make a return from exception
*JumpAddress = PcdGet32(PcdNormalFvBaseAddress);
diff --git a/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf b/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf
index 4b5df2887c..2a09063a54 100755
--- a/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf
+++ b/ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf
@@ -36,7 +36,7 @@
[LibraryClasses]
DebugLib
PcdLib
- PL390GicSecLib
+ ArmGicSecLib
PrintLib
SerialPortLib
diff --git a/ArmPlatformPkg/PrePeiCore/MainMPCore.c b/ArmPlatformPkg/PrePeiCore/MainMPCore.c
index 35c41540f4..a369c6e49c 100644
--- a/ArmPlatformPkg/PrePeiCore/MainMPCore.c
+++ b/ArmPlatformPkg/PrePeiCore/MainMPCore.c
@@ -12,9 +12,9 @@
*
**/
+#include <Library/ArmGicLib.h>
#include <Library/ArmMPCoreMailBoxLib.h>
#include <Chipset/ArmV7.h>
-#include <Drivers/PL390Gic.h>
#include "PrePeiCore.h"
@@ -45,7 +45,7 @@ SecondaryMain (
while (secondary_entry_addr = ArmGetMPCoreMailbox(), secondary_entry_addr == 0) {
ArmCallWFI();
// Acknowledge the interrupt and send End of Interrupt signal.
- PL390GicAcknowledgeSgiFrom(PcdGet32(PcdGicInterruptInterfaceBase),0/*CoreId*/);
+ ArmGicAcknowledgeSgiFrom(PcdGet32(PcdGicInterruptInterfaceBase),0/*CoreId*/);
}
secondary_start = (VOID (*)())secondary_entry_addr;
@@ -65,13 +65,13 @@ PrimaryMain (
{
EFI_SEC_PEI_HAND_OFF SecCoreData;
- //Enable the GIC Distributor
- PL390GicEnableDistributor(PcdGet32(PcdGicDistributorBase));
+ // Enable the GIC Distributor
+ ArmGicEnableDistributor(PcdGet32(PcdGicDistributorBase));
// If ArmVe has not been built as Standalone then we need to wake up the secondary cores
- if (FeaturePcdGet(PcdSendSgiToBringUpSecondaryCores)) {
+ if (FeaturePcdGet (PcdSendSgiToBringUpSecondaryCores)) {
// Sending SGI to all the Secondary CPU interfaces
- PL390GicSendSgiTo (PcdGet32(PcdGicDistributorBase), GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
+ ArmGicSendSgiTo (PcdGet32(PcdGicDistributorBase), ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
}
//
diff --git a/ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf b/ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
index 8c255443af..c2506ab542 100644
--- a/ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
+++ b/ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
@@ -44,7 +44,7 @@
DebugLib
DebugAgentLib
IoLib
- PL390GicNonSecLib
+ ArmGicLib
PrintLib
SerialPortLib
diff --git a/ArmPlatformPkg/PrePi/MainMPCore.c b/ArmPlatformPkg/PrePi/MainMPCore.c
index 165e7cfcb0..82d31905fe 100644
--- a/ArmPlatformPkg/PrePi/MainMPCore.c
+++ b/ArmPlatformPkg/PrePi/MainMPCore.c
@@ -14,9 +14,9 @@
#include "PrePi.h"
+#include <Library/ArmGicLib.h>
#include <Library/ArmMPCoreMailBoxLib.h>
#include <Chipset/ArmV7.h>
-#include <Drivers/PL390Gic.h>
VOID
PrimaryMain (
@@ -24,13 +24,13 @@ PrimaryMain (
IN UINT64 StartTimeStamp
)
{
- //Enable the GIC Distributor
- PL390GicEnableDistributor(PcdGet32(PcdGicDistributorBase));
+ // Enable the GIC Distributor
+ ArmGicEnableDistributor(PcdGet32(PcdGicDistributorBase));
// In some cases, the secondary cores are waiting for an SGI from the next stage boot loader toresume their initialization
if (!FixedPcdGet32(PcdSendSgiToBringUpSecondaryCores)) {
// Sending SGI to all the Secondary CPU interfaces
- PL390GicSendSgiTo (PcdGet32(PcdGicDistributorBase), GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
+ ArmGicSendSgiTo (PcdGet32(PcdGicDistributorBase), ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
}
PrePiMain (UefiMemoryBase, StartTimeStamp);
@@ -54,7 +54,7 @@ SecondaryMain (
while (secondary_entry_addr = ArmGetMPCoreMailbox(), secondary_entry_addr == 0) {
ArmCallWFI();
// Acknowledge the interrupt and send End of Interrupt signal.
- PL390GicAcknowledgeSgiFrom(PcdGet32(PcdGicInterruptInterfaceBase),0/*CoreId*/);
+ ArmGicAcknowledgeSgiFrom(PcdGet32(PcdGicInterruptInterfaceBase),0/*CoreId*/);
}
secondary_start = (VOID (*)())secondary_entry_addr;
diff --git a/ArmPlatformPkg/PrePi/PeiMPCore.inf b/ArmPlatformPkg/PrePi/PeiMPCore.inf
index 39781181fa..c8af14d19a 100755
--- a/ArmPlatformPkg/PrePi/PeiMPCore.inf
+++ b/ArmPlatformPkg/PrePi/PeiMPCore.inf
@@ -40,7 +40,7 @@
DebugAgentLib
ArmLib
ArmMPCoreMailBoxLib
- PL390GicNonSecLib
+ ArmGicLib
IoLib
TimerLib
SerialPortLib
diff --git a/ArmPlatformPkg/Sec/Sec.c b/ArmPlatformPkg/Sec/Sec.c
index 42df66ea20..5610168df1 100644
--- a/ArmPlatformPkg/Sec/Sec.c
+++ b/ArmPlatformPkg/Sec/Sec.c
@@ -24,7 +24,7 @@
#include <Library/ArmPlatformLib.h>
#include <Chipset/ArmV7.h>
-#include <Drivers/PL390Gic.h>
+#include <Library/ArmGicLib.h>
#define ARM_PRIMARY_CORE 0
@@ -160,27 +160,27 @@ CEntryPoint (
// 3: As all the cores are in secure state, use secure SGI's
//
- PL390GicEnableDistributor (PcdGet32(PcdGicDistributorBase));
- PL390GicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
+ ArmGicEnableDistributor (PcdGet32(PcdGicDistributorBase));
+ ArmGicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
// Send SGI to all Secondary core to wake them up from WFI state.
- PL390GicSendSgiTo (PcdGet32(PcdGicDistributorBase), GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
+ ArmGicSendSgiTo (PcdGet32(PcdGicDistributorBase), ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE, 0x0E);
} else {
// The secondary cores need to wait until the Trustzone chipsets configuration is done
// before switching to Non Secure World
// Enabled GIC CPU Interface
- PL390GicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
+ ArmGicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
// Waiting for the SGI from the primary core
ArmCallWFI();
// Acknowledge the interrupt and send End of Interrupt signal.
- PL390GicAcknowledgeSgiFrom (PcdGet32(PcdGicInterruptInterfaceBase), ARM_PRIMARY_CORE);
+ ArmGicAcknowledgeSgiFrom (PcdGet32(PcdGicInterruptInterfaceBase), PRIMARY_CORE_ID);
}
// Transfer the interrupt to Non-secure World
- PL390GicSetupNonSecure (PcdGet32(PcdGicDistributorBase),PcdGet32(PcdGicInterruptInterfaceBase));
+ ArmGicSetupNonSecure (PcdGet32(PcdGicDistributorBase),PcdGet32(PcdGicInterruptInterfaceBase));
// Write to CP15 Non-secure Access Control Register :
// - Enable CP10 and CP11 accesses in NS World
@@ -199,9 +199,9 @@ CEntryPoint (
// Trustzone is not enabled, just enable the Distributor and CPU interface
if (CoreId == ARM_PRIMARY_CORE) {
- PL390GicEnableDistributor (PcdGet32(PcdGicDistributorBase));
+ ArmGicEnableDistributor (PcdGet32(PcdGicDistributorBase));
}
- PL390GicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
+ ArmGicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
// With Trustzone support the transition from Sec to Normal world is done by return_from_exception().
// If we want to keep this function call we need to ensure the SVC's SPSR point to the same Program
diff --git a/ArmPlatformPkg/Sec/Sec.inf b/ArmPlatformPkg/Sec/Sec.inf
index 23dee117d3..bffa9b6795 100644
--- a/ArmPlatformPkg/Sec/Sec.inf
+++ b/ArmPlatformPkg/Sec/Sec.inf
@@ -42,7 +42,7 @@
DebugLib
DebugAgentLib
IoLib
- PL390GicSecLib
+ ArmGicSecLib
PrintLib
SerialPortLib