diff options
| author | jljusten <jljusten@6f19259b-4bc3-4df7-8a09-765794883524> | 2011-06-27 23:30:55 +0000 |
|---|---|---|
| committer | jljusten <jljusten@6f19259b-4bc3-4df7-8a09-765794883524> | 2011-06-27 23:30:55 +0000 |
| commit | 4b1bf81c20d5523554a83f6604df7930396f7c21 (patch) | |
| tree | 8764ce333f14a1e5722b9d0f75ac1e09f1e0df29 | |
| parent | 366f81a016c11a59669cdfb5adb714e6f036f65f (diff) | |
| download | edk2-platforms-4b1bf81c20d5523554a83f6604df7930396f7c21.tar.xz | |
MdeModulePkg: Add PEI USB drivers and related PPIs
Signed-off-by: jljusten
Reviewed-by: mdkinney
Reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11901 6f19259b-4bc3-4df7-8a09-765794883524
36 files changed, 15879 insertions, 0 deletions
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c new file mode 100644 index 0000000000..6c179b0935 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c @@ -0,0 +1,1248 @@ +/** @file
+PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+which is used to enable recovery function from USB Drivers.
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "EhcPeim.h"
+
+//
+// Two arrays used to translate the EHCI port state (change)
+// to the UEFI protocol's port state (change).
+//
+USB_PORT_STATE_MAP mUsbPortStateMap[] = {
+ {PORTSC_CONN, USB_PORT_STAT_CONNECTION},
+ {PORTSC_ENABLED, USB_PORT_STAT_ENABLE},
+ {PORTSC_SUSPEND, USB_PORT_STAT_SUSPEND},
+ {PORTSC_OVERCUR, USB_PORT_STAT_OVERCURRENT},
+ {PORTSC_RESET, USB_PORT_STAT_RESET},
+ {PORTSC_POWER, USB_PORT_STAT_POWER},
+ {PORTSC_OWNER, USB_PORT_STAT_OWNER}
+};
+
+USB_PORT_STATE_MAP mUsbPortChangeMap[] = {
+ {PORTSC_CONN_CHANGE, USB_PORT_STAT_C_CONNECTION},
+ {PORTSC_ENABLE_CHANGE, USB_PORT_STAT_C_ENABLE},
+ {PORTSC_OVERCUR_CHANGE, USB_PORT_STAT_C_OVERCURRENT}
+};
+
+/**
+ Read Ehc Operation register.
+
+ @param Ehc The EHCI device.
+ @param Offset The operation register offset.
+
+ @retval the register content read.
+
+**/
+UINT32
+EhcReadOpReg (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset
+ )
+{
+ UINT32 Data;
+
+ ASSERT (Ehc->CapLen != 0);
+
+ Data = MmioRead32 (Ehc->UsbHostControllerBaseAddress + Ehc->CapLen + Offset);
+
+ return Data;
+}
+
+/**
+ Write the data to the EHCI operation register.
+
+ @param Ehc The EHCI device.
+ @param Offset EHCI operation register offset.
+ @param Data The data to write.
+
+**/
+VOID
+EhcWriteOpReg (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ )
+{
+
+ ASSERT (Ehc->CapLen != 0);
+
+ MmioWrite32(Ehc->UsbHostControllerBaseAddress + Ehc->CapLen + Offset, Data);
+
+}
+
+/**
+ Set one bit of the operational register while keeping other bits.
+
+ @param Ehc The EHCI device.
+ @param Offset The offset of the operational register.
+ @param Bit The bit mask of the register to set.
+
+**/
+VOID
+EhcSetOpRegBit (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset,
+ IN UINT32 Bit
+ )
+{
+ UINT32 Data;
+
+ Data = EhcReadOpReg (Ehc, Offset);
+ Data |= Bit;
+ EhcWriteOpReg (Ehc, Offset, Data);
+}
+
+/**
+ Clear one bit of the operational register while keeping other bits.
+
+ @param Ehc The EHCI device.
+ @param Offset The offset of the operational register.
+ @param Bit The bit mask of the register to clear.
+
+**/
+VOID
+EhcClearOpRegBit (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset,
+ IN UINT32 Bit
+ )
+{
+ UINT32 Data;
+
+ Data = EhcReadOpReg (Ehc, Offset);
+ Data &= ~Bit;
+ EhcWriteOpReg (Ehc, Offset, Data);
+}
+
+/**
+ Wait the operation register's bit as specified by Bit
+ to become set (or clear).
+
+ @param Ehc The EHCI device.
+ @param Offset The offset of the operational register.
+ @param Bit The bit mask of the register to wait for.
+ @param WaitToSet Wait the bit to set or clear.
+ @param Timeout The time to wait before abort (in millisecond).
+
+ @retval EFI_SUCCESS The bit successfully changed by host controller.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+EhcWaitOpRegBit (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset,
+ IN UINT32 Bit,
+ IN BOOLEAN WaitToSet,
+ IN UINT32 Timeout
+ )
+{
+ UINT32 Index;
+
+ for (Index = 0; Index < Timeout / EHC_SYNC_POLL_INTERVAL + 1; Index++) {
+ if (EHC_REG_BIT_IS_SET (Ehc, Offset, Bit) == WaitToSet) {
+ return EFI_SUCCESS;
+ }
+
+ MicroSecondDelay (EHC_SYNC_POLL_INTERVAL);
+ }
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Read EHCI capability register.
+
+ @param Ehc The EHCI device.
+ @param Offset Capability register address.
+
+ @retval the register content read.
+
+**/
+UINT32
+EhcReadCapRegister (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset
+ )
+{
+ UINT32 Data;
+
+ Data = MmioRead32(Ehc->UsbHostControllerBaseAddress + Offset);
+
+ return Data;
+}
+
+/**
+ Set door bell and wait it to be ACKed by host controller.
+ This function is used to synchronize with the hardware.
+
+ @param Ehc The EHCI device.
+ @param Timeout The time to wait before abort (in millisecond, ms).
+
+ @retval EFI_TIMEOUT Time out happened while waiting door bell to set.
+ @retval EFI_SUCCESS Synchronized with the hardware.
+
+**/
+EFI_STATUS
+EhcSetAndWaitDoorBell (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Data;
+
+ EhcSetOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_IAAD);
+
+ Status = EhcWaitOpRegBit (Ehc, EHC_USBSTS_OFFSET, USBSTS_IAA, TRUE, Timeout);
+
+ //
+ // ACK the IAA bit in USBSTS register. Make sure other
+ // interrupt bits are not ACKed. These bits are WC (Write Clean).
+ //
+ Data = EhcReadOpReg (Ehc, EHC_USBSTS_OFFSET);
+ Data &= ~USBSTS_INTACK_MASK;
+ Data |= USBSTS_IAA;
+
+ EhcWriteOpReg (Ehc, EHC_USBSTS_OFFSET, Data);
+
+ return Status;
+}
+
+/**
+ Clear all the interrutp status bits, these bits
+ are Write-Clean.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhcAckAllInterrupt (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ EhcWriteOpReg (Ehc, EHC_USBSTS_OFFSET, USBSTS_INTACK_MASK);
+}
+
+/**
+ Enable the periodic schedule then wait EHC to
+ actually enable it.
+
+ @param Ehc The EHCI device.
+ @param Timeout The time to wait before abort (in millisecond, ms).
+
+ @retval EFI_TIMEOUT Time out happened while enabling periodic schedule.
+ @retval EFI_SUCCESS The periodical schedule is enabled.
+
+**/
+EFI_STATUS
+EhcEnablePeriodSchd (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+{
+ EFI_STATUS Status;
+
+ EhcSetOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_ENABLE_PERIOD);
+
+ Status = EhcWaitOpRegBit (Ehc, EHC_USBSTS_OFFSET, USBSTS_PERIOD_ENABLED, TRUE, Timeout);
+ return Status;
+}
+
+/**
+ Enable asynchrounous schedule.
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort.
+
+ @retval EFI_SUCCESS The EHCI asynchronous schedule is enabled.
+ @retval Others Failed to enable the asynchronous scheudle.
+
+**/
+EFI_STATUS
+EhcEnableAsyncSchd (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+{
+ EFI_STATUS Status;
+
+ EhcSetOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_ENABLE_ASYNC);
+
+ Status = EhcWaitOpRegBit (Ehc, EHC_USBSTS_OFFSET, USBSTS_ASYNC_ENABLED, TRUE, Timeout);
+ return Status;
+}
+
+/**
+ Check whether Ehc is halted.
+
+ @param Ehc The EHCI device.
+
+ @retval TRUE The controller is halted.
+ @retval FALSE The controller isn't halted.
+
+**/
+BOOLEAN
+EhcIsHalt (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ return EHC_REG_BIT_IS_SET (Ehc, EHC_USBSTS_OFFSET, USBSTS_HALT);
+}
+
+/**
+ Check whether system error occurred.
+
+ @param Ehc The EHCI device.
+
+ @retval TRUE System error happened.
+ @retval FALSE No system error.
+
+**/
+BOOLEAN
+EhcIsSysError (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ return EHC_REG_BIT_IS_SET (Ehc, EHC_USBSTS_OFFSET, USBSTS_SYS_ERROR);
+}
+
+/**
+ Reset the host controller.
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort (in millisecond, ms).
+
+ @retval EFI_TIMEOUT The transfer failed due to time out.
+ @retval Others Failed to reset the host.
+
+**/
+EFI_STATUS
+EhcResetHC (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Host can only be reset when it is halt. If not so, halt it
+ //
+ if (!EHC_REG_BIT_IS_SET (Ehc, EHC_USBSTS_OFFSET, USBSTS_HALT)) {
+ Status = EhcHaltHC (Ehc, Timeout);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+
+ EhcSetOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_RESET);
+ Status = EhcWaitOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_RESET, FALSE, Timeout);
+ return Status;
+}
+
+/**
+ Halt the host controller.
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort.
+
+ @retval EFI_TIMEOUT Failed to halt the controller before Timeout.
+ @retval EFI_SUCCESS The EHCI is halt.
+
+**/
+EFI_STATUS
+EhcHaltHC (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+{
+ EFI_STATUS Status;
+
+ EhcClearOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_RUN);
+ Status = EhcWaitOpRegBit (Ehc, EHC_USBSTS_OFFSET, USBSTS_HALT, TRUE, Timeout);
+ return Status;
+}
+
+/**
+ Set the EHCI to run.
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort.
+
+ @retval EFI_SUCCESS The EHCI is running.
+ @retval Others Failed to set the EHCI to run.
+
+**/
+EFI_STATUS
+EhcRunHC (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+{
+ EFI_STATUS Status;
+
+ EhcSetOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_RUN);
+ Status = EhcWaitOpRegBit (Ehc, EHC_USBSTS_OFFSET, USBSTS_HALT, FALSE, Timeout);
+ return Status;
+}
+
+/**
+ Initialize the HC hardware.
+ EHCI spec lists the five things to do to initialize the hardware.
+ 1. Program CTRLDSSEGMENT.
+ 2. Set USBINTR to enable interrupts.
+ 3. Set periodic list base.
+ 4. Set USBCMD, interrupt threshold, frame list size etc.
+ 5. Write 1 to CONFIGFLAG to route all ports to EHCI.
+
+ @param Ehc The EHCI device.
+
+ @retval EFI_SUCCESS The EHCI has come out of halt state.
+ @retval EFI_TIMEOUT Time out happened.
+
+**/
+EFI_STATUS
+EhcInitHC (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+ UINTN PageNumber;
+
+ ASSERT (EhcIsHalt (Ehc));
+
+ //
+ // Allocate the periodic frame and associated memeory
+ // management facilities if not already done.
+ //
+ if (Ehc->PeriodFrame != NULL) {
+ EhcFreeSched (Ehc);
+ }
+ PageNumber = sizeof(PEI_URB)/PAGESIZE +1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ PageNumber,
+ &TempPtr
+ );
+ Ehc->Urb = (PEI_URB *) ((UINTN) TempPtr);
+ if (Ehc->Urb == NULL) {
+ return Status;
+ }
+
+ Status = EhcInitSched (Ehc);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // 1. Program the CTRLDSSEGMENT register with the high 32 bit addr
+ //
+ EhcWriteOpReg (Ehc, EHC_CTRLDSSEG_OFFSET, Ehc->High32bitAddr);
+
+ //
+ // 2. Clear USBINTR to disable all the interrupt. UEFI works by polling
+ //
+ EhcWriteOpReg (Ehc, EHC_USBINTR_OFFSET, 0);
+
+ //
+ // 3. Program periodic frame list, already done in EhcInitSched
+ // 4. Start the Host Controller
+ //
+ EhcSetOpRegBit (Ehc, EHC_USBCMD_OFFSET, USBCMD_RUN);
+
+ //
+ // 5. Set all ports routing to EHC
+ //
+ EhcSetOpRegBit (Ehc, EHC_CONFIG_FLAG_OFFSET, CONFIGFLAG_ROUTE_EHC);
+
+ //
+ // Wait roothub port power stable
+ //
+ MicroSecondDelay (EHC_ROOT_PORT_RECOVERY_STALL);
+
+ Status = EhcEnablePeriodSchd (Ehc, EHC_GENERIC_TIMEOUT);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = EhcEnableAsyncSchd (Ehc, EHC_GENERIC_TIMEOUT);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction in bit 7.
+ @param DeviceSpeed Device speed, Low speed device doesn't support
+ bulk transfer.
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ sending or receiving.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param DataToggle On input, the initial data toggle for the transfer;
+ On output, it is updated to to next data toggle to use of
+ the subsequent bulk transfer.
+ @param TimeOut Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+ @param Translator A pointr to the transaction translator data.
+ @param TransferResult A pointer to the detailed result information of the
+ bulk transfer.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+ PEI_URB *Urb;
+ EFI_STATUS Status;
+
+ //
+ // Validate the parameters
+ //
+ if ((DataLength == NULL) || (*DataLength == 0) ||
+ (Data == NULL) || (Data[0] == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 0) && (*DataToggle != 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((DeviceSpeed == EFI_USB_SPEED_LOW) ||
+ ((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
+ ((EFI_USB_SPEED_HIGH == DeviceSpeed) && (MaximumPacketLength > 512))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Ehc =PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(This);
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ Status = EFI_DEVICE_ERROR;
+
+ if (EhcIsHalt (Ehc) || EhcIsSysError (Ehc)) {
+ EhcAckAllInterrupt (Ehc);
+ goto ON_EXIT;
+ }
+
+ EhcAckAllInterrupt (Ehc);
+
+ //
+ // Create a new URB, insert it into the asynchronous
+ // schedule list, then poll the execution status.
+ //
+ Urb = EhcCreateUrb (
+ Ehc,
+ DeviceAddress,
+ EndPointAddress,
+ DeviceSpeed,
+ *DataToggle,
+ MaximumPacketLength,
+ Translator,
+ EHC_BULK_TRANSFER,
+ NULL,
+ Data[0],
+ *DataLength,
+ NULL,
+ NULL,
+ 1
+ );
+
+ if (Urb == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ EhcLinkQhToAsync (Ehc, Urb->Qh);
+ Status = EhcExecTransfer (Ehc, Urb, TimeOut);
+ EhcUnlinkQhFromAsync (Ehc, Urb->Qh);
+
+ *TransferResult = Urb->Result;
+ *DataLength = Urb->Completed;
+ *DataToggle = Urb->DataToggle;
+
+ if (*TransferResult == EFI_USB_NOERROR) {
+ Status = EFI_SUCCESS;
+ }
+
+ EhcAckAllInterrupt (Ehc);
+ EhcFreeUrb (Ehc, Urb);
+
+ON_EXIT:
+ return Status;
+}
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcGetRootHubPortNumber (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ )
+{
+
+ PEI_USB2_HC_DEV *EhcDev;
+ EhcDev = PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS (This);
+
+ if (PortNumber == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *PortNumber = (UINT8)(EhcDev->HcStructParams & HCSP_NPORTS);
+ return EFI_SUCCESS;
+
+}
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
+ @param PortNumber Specifies the root hub port whose feature
+ is requested to be cleared.
+ @param PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcClearRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+ UINT32 Offset;
+ UINT32 State;
+ UINT32 TotalPort;
+ EFI_STATUS Status;
+
+ Ehc = PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS (This);
+ Status = EFI_SUCCESS;
+
+ TotalPort = (Ehc->HcStructParams & HCSP_NPORTS);
+
+ if (PortNumber >= TotalPort) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Offset = EHC_PORT_STAT_OFFSET + (4 * PortNumber);
+ State = EhcReadOpReg (Ehc, Offset);
+ State &= ~PORTSC_CHANGE_MASK;
+
+ switch (PortFeature) {
+ case EfiUsbPortEnable:
+ //
+ // Clear PORT_ENABLE feature means disable port.
+ //
+ State &= ~PORTSC_ENABLED;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortSuspend:
+ //
+ // A write of zero to this bit is ignored by the host
+ // controller. The host controller will unconditionally
+ // set this bit to a zero when:
+ // 1. software sets the Forct Port Resume bit to a zero from a one.
+ // 2. software sets the Port Reset bit to a one frome a zero.
+ //
+ State &= ~PORSTSC_RESUME;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortReset:
+ //
+ // Clear PORT_RESET means clear the reset signal.
+ //
+ State &= ~PORTSC_RESET;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortOwner:
+ //
+ // Clear port owner means this port owned by EHC
+ //
+ State &= ~PORTSC_OWNER;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortConnectChange:
+ //
+ // Clear connect status change
+ //
+ State |= PORTSC_CONN_CHANGE;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortEnableChange:
+ //
+ // Clear enable status change
+ //
+ State |= PORTSC_ENABLE_CHANGE;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortOverCurrentChange:
+ //
+ // Clear PortOverCurrent change
+ //
+ State |= PORTSC_OVERCUR_CHANGE;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortPower:
+ case EfiUsbPortSuspendChange:
+ case EfiUsbPortResetChange:
+ //
+ // Not supported or not related operation
+ //
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ON_EXIT:
+ return Status;
+}
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES
+ @param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI
+ @param PortNumber Root hub port to set.
+ @param PortFeature Feature to set.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcSetRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+ UINT32 Offset;
+ UINT32 State;
+ UINT32 TotalPort;
+ EFI_STATUS Status;
+
+ Ehc = PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS (This);
+ Status = EFI_SUCCESS;
+
+ TotalPort = (Ehc->HcStructParams & HCSP_NPORTS);
+
+ if (PortNumber >= TotalPort) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Offset = (UINT32) (EHC_PORT_STAT_OFFSET + (4 * PortNumber));
+ State = EhcReadOpReg (Ehc, Offset);
+
+ //
+ // Mask off the port status change bits, these bits are
+ // write clean bit
+ //
+ State &= ~PORTSC_CHANGE_MASK;
+
+ switch (PortFeature) {
+ case EfiUsbPortEnable:
+ //
+ // Sofeware can't set this bit, Port can only be enable by
+ // EHCI as a part of the reset and enable
+ //
+ State |= PORTSC_ENABLED;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortSuspend:
+ State |= PORTSC_SUSPEND;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortReset:
+ //
+ // Make sure Host Controller not halt before reset it
+ //
+ if (EhcIsHalt (Ehc)) {
+ Status = EhcRunHC (Ehc, EHC_GENERIC_TIMEOUT);
+
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+ }
+
+ //
+ // Set one to PortReset bit must also set zero to PortEnable bit
+ //
+ State |= PORTSC_RESET;
+ State &= ~PORTSC_ENABLED;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ case EfiUsbPortPower:
+ //
+ // Not supported, ignore the operation
+ //
+ Status = EFI_SUCCESS;
+ break;
+
+ case EfiUsbPortOwner:
+ State |= PORTSC_OWNER;
+ EhcWriteOpReg (Ehc, Offset, State);
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+ON_EXIT:
+ return Status;
+}
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
+ @param PortNumber The root hub port to retrieve the state from.
+ @param PortStatus Variable to receive the port state.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified.
+ by PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcGetRootHubPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+ UINT32 Offset;
+ UINT32 State;
+ UINT32 TotalPort;
+ UINTN Index;
+ UINTN MapSize;
+ EFI_STATUS Status;
+
+ if (PortStatus == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Ehc = PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(This);
+ Status = EFI_SUCCESS;
+
+ TotalPort = (Ehc->HcStructParams & HCSP_NPORTS);
+
+ if (PortNumber >= TotalPort) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Offset = (UINT32) (EHC_PORT_STAT_OFFSET + (4 * PortNumber));
+ PortStatus->PortStatus = 0;
+ PortStatus->PortChangeStatus = 0;
+
+ State = EhcReadOpReg (Ehc, Offset);
+
+ //
+ // Identify device speed. If in K state, it is low speed.
+ // If the port is enabled after reset, the device is of
+ // high speed. The USB bus driver should retrieve the actual
+ // port speed after reset.
+ //
+ if (EHC_BIT_IS_SET (State, PORTSC_LINESTATE_K)) {
+ PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
+
+ } else if (EHC_BIT_IS_SET (State, PORTSC_ENABLED)) {
+ PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
+ }
+
+ //
+ // Convert the EHCI port/port change state to UEFI status
+ //
+ MapSize = sizeof (mUsbPortStateMap) / sizeof (USB_PORT_STATE_MAP);
+
+ for (Index = 0; Index < MapSize; Index++) {
+ if (EHC_BIT_IS_SET (State, mUsbPortStateMap[Index].HwState)) {
+ PortStatus->PortStatus = (UINT16) (PortStatus->PortStatus | mUsbPortStateMap[Index].UefiState);
+ }
+ }
+
+ MapSize = sizeof (mUsbPortChangeMap) / sizeof (USB_PORT_STATE_MAP);
+
+ for (Index = 0; Index < MapSize; Index++) {
+ if (EHC_BIT_IS_SET (State, mUsbPortChangeMap[Index].HwState)) {
+ PortStatus->PortChangeStatus = (UINT16) (PortStatus->PortChangeStatus | mUsbPortChangeMap[Index].UefiState);
+ }
+ }
+
+ON_EXIT:
+ return Status;
+}
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
+ @param DeviceAddress The target device address.
+ @param DeviceSpeed Target device speed.
+ @param MaximumPacketLength Maximum packet size the default control transfer
+ endpoint is capable of sending or receiving.
+ @param Request USB device request to send.
+ @param TransferDirection Specifies the data direction for the data stage.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+ @param TimeOut Indicates the maximum timeout, in millisecond.
+ @param Translator Transaction translator to be used by this device.
+ @param TransferResult Return the result of this control transfer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+ PEI_URB *Urb;
+ UINT8 Endpoint;
+ EFI_STATUS Status;
+
+ //
+ // Validate parameters
+ //
+ if ((Request == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection != EfiUsbDataIn) &&
+ (TransferDirection != EfiUsbDataOut) &&
+ (TransferDirection != EfiUsbNoData)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection == EfiUsbNoData) &&
+ ((Data != NULL) || (*DataLength != 0))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection != EfiUsbNoData) &&
+ ((Data == NULL) || (*DataLength == 0))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((MaximumPacketLength != 8) && (MaximumPacketLength != 16) &&
+ (MaximumPacketLength != 32) && (MaximumPacketLength != 64)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+
+ if ((DeviceSpeed == EFI_USB_SPEED_LOW) ||
+ ((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
+ ((EFI_USB_SPEED_HIGH == DeviceSpeed) && (MaximumPacketLength > 512))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Ehc = PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS (This);
+
+ Status = EFI_DEVICE_ERROR;
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+
+ if (EhcIsHalt (Ehc) || EhcIsSysError (Ehc)) {
+ EhcAckAllInterrupt (Ehc);
+ goto ON_EXIT;
+ }
+
+ EhcAckAllInterrupt (Ehc);
+
+ //
+ // Create a new URB, insert it into the asynchronous
+ // schedule list, then poll the execution status.
+ //
+ //
+ // Encode the direction in address, although default control
+ // endpoint is bidirectional. EhcCreateUrb expects this
+ // combination of Ep addr and its direction.
+ //
+ Endpoint = (UINT8) (0 | ((TransferDirection == EfiUsbDataIn) ? 0x80 : 0));
+ Urb = EhcCreateUrb (
+ Ehc,
+ DeviceAddress,
+ Endpoint,
+ DeviceSpeed,
+ 0,
+ MaximumPacketLength,
+ Translator,
+ EHC_CTRL_TRANSFER,
+ Request,
+ Data,
+ *DataLength,
+ NULL,
+ NULL,
+ 1
+ );
+
+ if (Urb == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ EhcLinkQhToAsync (Ehc, Urb->Qh);
+ Status = EhcExecTransfer (Ehc, Urb, TimeOut);
+ EhcUnlinkQhFromAsync (Ehc, Urb->Qh);
+
+ //
+ // Get the status from URB. The result is updated in EhcCheckUrbResult
+ // which is called by EhcExecTransfer
+ //
+ *TransferResult = Urb->Result;
+ *DataLength = Urb->Completed;
+
+ if (*TransferResult == EFI_USB_NOERROR) {
+ Status = EFI_SUCCESS;
+ }
+
+ EhcAckAllInterrupt (Ehc);
+ EhcFreeUrb (Ehc, Urb);
+
+ON_EXIT:
+ return Status;
+}
+
+/**
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCCESS PPI successfully installed.
+
+**/
+EFI_STATUS
+EFIAPI
+EhcPeimEntry (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ PEI_USB_CONTROLLER_PPI *ChipSetUsbControllerPpi;
+ EFI_STATUS Status;
+ UINT8 Index;
+ UINTN ControllerType;
+ UINTN BaseAddress;
+ UINTN MemPages;
+ PEI_USB2_HC_DEV *EhcDev;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+
+ //
+ // Shadow this PEIM to run from memory
+ //
+ if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
+ return EFI_SUCCESS;
+ }
+
+ Status = PeiServicesLocatePpi (
+ &gPeiUsbControllerPpiGuid,
+ 0,
+ NULL,
+ (VOID **) &ChipSetUsbControllerPpi
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Index = 0;
+ while (TRUE) {
+ Status = ChipSetUsbControllerPpi->GetUsbController (
+ (EFI_PEI_SERVICES **) PeiServices,
+ ChipSetUsbControllerPpi,
+ Index,
+ &ControllerType,
+ &BaseAddress
+ );
+ //
+ // When status is error, meant no controller is found
+ //
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ //
+ // This PEIM is for UHC type controller.
+ //
+ if (ControllerType != PEI_EHCI_CONTROLLER) {
+ Index++;
+ continue;
+ }
+
+ MemPages = sizeof (PEI_USB2_HC_DEV) / PAGESIZE + 1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ MemPages,
+ &TempPtr
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ZeroMem((VOID *)(UINTN)TempPtr, MemPages*PAGESIZE);
+ EhcDev = (PEI_USB2_HC_DEV *) ((UINTN) TempPtr);
+
+ EhcDev->Signature = USB2_HC_DEV_SIGNATURE;
+
+ EhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
+
+
+ EhcDev->HcStructParams = EhcReadCapRegister (EhcDev, EHC_HCSPARAMS_OFFSET);
+ EhcDev->HcCapParams = EhcReadCapRegister (EhcDev, EHC_HCCPARAMS_OFFSET);
+ EhcDev->CapLen = EhcReadCapRegister (EhcDev, EHC_CAPLENGTH_OFFSET) & 0x0FF;
+ //
+ // Initialize Uhc's hardware
+ //
+ Status = InitializeUsbHC (EhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ EhcDev->Usb2HostControllerPpi.ControlTransfer = EhcControlTransfer;
+ EhcDev->Usb2HostControllerPpi.BulkTransfer = EhcBulkTransfer;
+ EhcDev->Usb2HostControllerPpi.GetRootHubPortNumber = EhcGetRootHubPortNumber;
+ EhcDev->Usb2HostControllerPpi.GetRootHubPortStatus = EhcGetRootHubPortStatus;
+ EhcDev->Usb2HostControllerPpi.SetRootHubPortFeature = EhcSetRootHubPortFeature;
+ EhcDev->Usb2HostControllerPpi.ClearRootHubPortFeature = EhcClearRootHubPortFeature;
+
+ EhcDev->PpiDescriptor.Flags = (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
+ EhcDev->PpiDescriptor.Guid = &gPeiUsb2HostControllerPpiGuid;
+ EhcDev->PpiDescriptor.Ppi = &EhcDev->Usb2HostControllerPpi;
+
+ Status = PeiServicesInstallPpi (&EhcDev->PpiDescriptor);
+ if (EFI_ERROR (Status)) {
+ Index++;
+ continue;
+ }
+
+ Index++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ @param EhcDev EHCI Device.
+
+ @retval EFI_SUCCESS EHCI successfully initialized.
+ @retval EFI_ABORTED EHCI was failed to be initialized.
+
+**/
+EFI_STATUS
+InitializeUsbHC (
+ IN PEI_USB2_HC_DEV *EhcDev
+ )
+{
+ EFI_STATUS Status;
+
+
+ EhcResetHC (EhcDev, EHC_RESET_TIMEOUT);
+
+ Status = EhcInitHC (EhcDev);
+
+ if (EFI_ERROR (Status)) {
+ return EFI_ABORTED;
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h new file mode 100644 index 0000000000..fa1671bd8f --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h @@ -0,0 +1,227 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _RECOVERY_EHC_H_
+#define _RECOVERY_EHC_H_
+
+#include <PiPei.h>
+
+#include <Ppi/UsbController.h>
+#include <Ppi/Usb2HostController.h>
+
+#include <Library/DebugLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/TimerLib.h>
+#include <Library/IoLib.h>
+
+typedef struct _PEI_USB2_HC_DEV PEI_USB2_HC_DEV;
+
+#define EFI_LIST_ENTRY LIST_ENTRY
+
+#include "UsbHcMem.h"
+#include "EhciReg.h"
+#include "EhciUrb.h"
+#include "EhciSched.h"
+
+#define EFI_USB_SPEED_FULL 0x0000
+#define EFI_USB_SPEED_LOW 0x0001
+#define EFI_USB_SPEED_HIGH 0x0002
+
+#define PAGESIZE 4096
+
+#define EHC_1_MICROSECOND 1
+#define EHC_1_MILLISECOND (1000 * EHC_1_MICROSECOND)
+#define EHC_1_SECOND (1000 * EHC_1_MILLISECOND)
+
+//
+// EHCI register operation timeout, set by experience
+//
+#define EHC_RESET_TIMEOUT (1 * EHC_1_SECOND)
+#define EHC_GENERIC_TIMEOUT (10 * EHC_1_MILLISECOND)
+
+
+//
+// Wait for roothub port power stable, refers to Spec[EHCI1.0-2.3.9]
+//
+#define EHC_ROOT_PORT_RECOVERY_STALL (20 * EHC_1_MILLISECOND)
+
+//
+// Sync and Async transfer polling interval, set by experience,
+// and the unit of Async is 100us, means 50ms as interval.
+//
+#define EHC_SYNC_POLL_INTERVAL (6 * EHC_1_MILLISECOND)
+
+#define EHC_ASYNC_POLL_INTERVAL (50 * 10000U)
+
+//
+//Iterate through the doule linked list. NOT delete safe
+//
+#define EFI_LIST_FOR_EACH(Entry, ListHead) \
+ for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)
+
+//
+//Iterate through the doule linked list. This is delete-safe.
+//Don't touch NextEntry
+//
+#define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \
+ for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
+ Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)
+
+#define EFI_LIST_CONTAINER(Entry, Type, Field) BASE_CR(Entry, Type, Field)
+
+
+#define EHC_LOW_32BIT(Addr64) ((UINT32)(((UINTN)(Addr64)) & 0XFFFFFFFF))
+#define EHC_HIGH_32BIT(Addr64) ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF))
+#define EHC_BIT_IS_SET(Data, Bit) ((BOOLEAN)(((Data) & (Bit)) == (Bit)))
+
+#define EHC_REG_BIT_IS_SET(Ehc, Offset, Bit) \
+ (EHC_BIT_IS_SET(EhcReadOpReg ((Ehc), (Offset)), (Bit)))
+
+#define USB2_HC_DEV_SIGNATURE SIGNATURE_32 ('e', 'h', 'c', 'i')
+
+struct _PEI_USB2_HC_DEV {
+ UINTN Signature;
+ PEI_USB2_HOST_CONTROLLER_PPI Usb2HostControllerPpi;
+ EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
+ UINT32 UsbHostControllerBaseAddress;
+ PEI_URB *Urb;
+ USBHC_MEM_POOL *MemPool;
+
+ //
+ // Schedule data shared between asynchronous and periodic
+ // transfers:
+ // ShortReadStop, as its name indicates, is used to terminate
+ // the short read except the control transfer. EHCI follows
+ // the alternative next QTD point when a short read happens.
+ // For control transfer, even the short read happens, try the
+ // status stage.
+ //
+ PEI_EHC_QTD *ShortReadStop;
+ EFI_EVENT PollTimer;
+
+ //
+ // Asynchronous(bulk and control) transfer schedule data:
+ // ReclaimHead is used as the head of the asynchronous transfer
+ // list. It acts as the reclamation header.
+ //
+ PEI_EHC_QH *ReclaimHead;
+
+ //
+ // Peroidic (interrupt) transfer schedule data:
+ //
+ VOID *PeriodFrame; // Mapped as common buffer
+ VOID *PeriodFrameHost;
+ VOID *PeriodFrameMap;
+
+ PEI_EHC_QH *PeriodOne;
+ EFI_LIST_ENTRY AsyncIntTransfers;
+
+ //
+ // EHCI configuration data
+ //
+ UINT32 HcStructParams; // Cache of HC structure parameter, EHC_HCSPARAMS_OFFSET
+ UINT32 HcCapParams; // Cache of HC capability parameter, HCCPARAMS
+ UINT32 CapLen; // Capability length
+ UINT32 High32bitAddr;
+};
+
+#define PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(a) CR (a, PEI_USB2_HC_DEV, Usb2HostControllerPpi, USB2_HC_DEV_SIGNATURE)
+
+/**
+ @param EhcDev EHCI Device.
+
+ @retval EFI_SUCCESS EHCI successfully initialized.
+ @retval EFI_ABORTED EHCI was failed to be initialized.
+
+**/
+EFI_STATUS
+InitializeUsbHC (
+ IN PEI_USB2_HC_DEV *EhcDev
+ );
+
+/**
+ Initialize the memory management pool for the host controller.
+
+ @param Ehc The EHCI device.
+ @param Check4G Whether the host controller requires allocated memory
+ from one 4G address space.
+ @param Which4G The 4G memory area each memory allocated should be from.
+
+ @retval EFI_SUCCESS The memory pool is initialized.
+ @retval EFI_OUT_OF_RESOURCE Fail to init the memory pool.
+
+**/
+USBHC_MEM_POOL *
+UsbHcInitMemPool (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN BOOLEAN Check4G,
+ IN UINT32 Which4G
+ )
+;
+
+/**
+ Release the memory management pool.
+
+ @param Pool The USB memory pool to free.
+
+ @retval EFI_DEVICE_ERROR Fail to free the memory pool.
+ @retval EFI_SUCCESS The memory pool is freed.
+
+**/
+EFI_STATUS
+UsbHcFreeMemPool (
+ IN USBHC_MEM_POOL *Pool
+ )
+;
+
+/**
+ Allocate some memory from the host controller's memory pool
+ which can be used to communicate with host controller.
+
+ @param Ehc The EHCI device.
+ @param Pool The host controller's memory pool.
+ @param Size Size of the memory to allocate.
+
+ @return The allocated memory or NULL.
+
+**/
+VOID *
+UsbHcAllocateMem (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN USBHC_MEM_POOL *Pool,
+ IN UINTN Size
+ )
+;
+
+/**
+ Free the allocated memory back to the memory pool.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The memory to free.
+ @param Size The size of the memory to free.
+
+**/
+VOID
+UsbHcFreeMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ )
+;
+
+#endif
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf new file mode 100644 index 0000000000..f10ad49e88 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf @@ -0,0 +1,66 @@ +## @file
+# Component description file for EhcPeim PEIM to produce gPeiUsb2HostControllerPpiGuid
+# based on gPeiUsbControllerPpiGuid which is used to enable recovery function from USB Drivers.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions
+# of the BSD License which accompanies this distribution. The
+# full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = EhciPei
+ FILE_GUID = BAB4F20F-0981-4b5f-A047-6EF83BEEAB3C
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = EhcPeimEntry
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ EhcPeim.c
+ EhcPeim.h
+ EhciUrb.c
+ EhciSched.c
+ UsbHcMem.c
+ EhciReg.h
+ EhciSched.h
+ EhciUrb.h
+ UsbHcMem.h
+
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+
+[LibraryClasses]
+ IoLib
+ TimerLib
+ BaseMemoryLib
+ PeimEntryPoint
+ PeiServicesLib
+
+
+[Ppis]
+ gPeiUsb2HostControllerPpiGuid # PPI ALWAYS_PRODUCED
+ gPeiUsbControllerPpiGuid # PPI ALWAYS_CONSUMED
+
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbControllerPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid
+
+
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h new file mode 100644 index 0000000000..34c61d8a94 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h @@ -0,0 +1,310 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EFI_EHCI_REG_H_
+#define _EFI_EHCI_REG_H_
+
+
+
+//
+// Capability register offset
+//
+#define EHC_CAPLENGTH_OFFSET 0 // Capability register length offset
+#define EHC_HCSPARAMS_OFFSET 0x04 // Structural Parameters 04-07h
+#define EHC_HCCPARAMS_OFFSET 0x08 // Capability parameters offset
+
+//
+// Capability register bit definition
+//
+#define HCSP_NPORTS 0x0F // Number of root hub port
+#define HCCP_64BIT 0x01 // 64-bit addressing capability
+
+//
+// Operational register offset
+//
+#define EHC_USBCMD_OFFSET 0x0 // USB command register offset
+#define EHC_USBSTS_OFFSET 0x04 // Statue register offset
+#define EHC_USBINTR_OFFSET 0x08 // USB interrutp offset
+#define EHC_FRINDEX_OFFSET 0x0C // Frame index offset
+#define EHC_CTRLDSSEG_OFFSET 0x10 // Control data structure segment offset
+#define EHC_FRAME_BASE_OFFSET 0x14 // Frame list base address offset
+#define EHC_ASYNC_HEAD_OFFSET 0x18 // Next asynchronous list address offset
+#define EHC_CONFIG_FLAG_OFFSET 0x40 // Configure flag register offset
+#define EHC_PORT_STAT_OFFSET 0x44 // Port status/control offset
+
+#define EHC_FRAME_LEN 1024
+
+//
+// Register bit definition
+//
+#define CONFIGFLAG_ROUTE_EHC 0x01 // Route port to EHC
+
+#define USBCMD_RUN 0x01 // Run/stop
+#define USBCMD_RESET 0x02 // Start the host controller reset
+#define USBCMD_ENABLE_PERIOD 0x10 // Enable periodic schedule
+#define USBCMD_ENABLE_ASYNC 0x20 // Enable asynchronous schedule
+#define USBCMD_IAAD 0x40 // Interrupt on async advance doorbell
+
+#define USBSTS_IAA 0x20 // Interrupt on async advance
+#define USBSTS_PERIOD_ENABLED 0x4000 // Periodic schedule status
+#define USBSTS_ASYNC_ENABLED 0x8000 // Asynchronous schedule status
+#define USBSTS_HALT 0x1000 // Host controller halted
+#define USBSTS_SYS_ERROR 0x10 // Host system error
+#define USBSTS_INTACK_MASK 0x003F // Mask for the interrupt ACK, the WC
+ // (write clean) bits in USBSTS register
+
+#define PORTSC_CONN 0x01 // Current Connect Status
+#define PORTSC_CONN_CHANGE 0x02 // Connect Status Change
+#define PORTSC_ENABLED 0x04 // Port Enable / Disable
+#define PORTSC_ENABLE_CHANGE 0x08 // Port Enable / Disable Change
+#define PORTSC_OVERCUR 0x10 // Over current Active
+#define PORTSC_OVERCUR_CHANGE 0x20 // Over current Change
+#define PORSTSC_RESUME 0x40 // Force Port Resume
+#define PORTSC_SUSPEND 0x80 // Port Suspend State
+#define PORTSC_RESET 0x100 // Port Reset
+#define PORTSC_LINESTATE_K 0x400 // Line Status K-state
+#define PORTSC_LINESTATE_J 0x800 // Line Status J-state
+#define PORTSC_POWER 0x1000 // Port Power
+#define PORTSC_OWNER 0x2000 // Port Owner
+#define PORTSC_CHANGE_MASK 0x2A // Mask of the port change bits,
+ // they are WC (write clean)
+//
+// PCI Configuration Registers
+//
+#define EHC_BAR_INDEX 0 // how many bytes away from USB_BASE to 0x10
+
+#define EHC_LINK_TERMINATED(Link) (((Link) & 0x01) != 0)
+
+#define EHC_ADDR(High, QhHw32) \
+ ((VOID *) (UINTN) (LShiftU64 ((High), 32) | ((QhHw32) & 0xFFFFFFF0)))
+
+#define EHCI_IS_DATAIN(EndpointAddr) EHC_BIT_IS_SET((EndpointAddr), 0x80)
+
+//
+// Structure to map the hardware port states to the
+// UEFI's port states.
+//
+typedef struct {
+ UINT16 HwState;
+ UINT16 UefiState;
+} USB_PORT_STATE_MAP;
+
+//
+// Ehci Data and Ctrl Structures
+//
+#pragma pack(1)
+typedef struct {
+ UINT8 Pi;
+ UINT8 SubClassCode;
+ UINT8 BaseCode;
+} USB_CLASSC;
+#pragma pack()
+
+
+/**
+ Read EHCI capability register.
+
+ @param Ehc The EHCI device.
+ @param Offset Capability register address.
+
+ @retval the register content read.
+
+**/
+UINT32
+EhcReadCapRegister (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset
+ )
+;
+
+/**
+ Read Ehc Operation register.
+
+ @param Ehc The EHCI device.
+ @param Offset The operation register offset.
+
+ @retval the register content read.
+
+**/
+UINT32
+EhcReadOpReg (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset
+ )
+;
+
+/**
+ Write the data to the EHCI operation register.
+
+ @param Ehc The EHCI device.
+ @param Offset EHCI operation register offset.
+ @param Data The data to write.
+
+**/
+VOID
+EhcWriteOpReg (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ )
+;
+
+/**
+ Stop the legacy USB SMI support.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhcClearLegacySupport (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Set door bell and wait it to be ACKed by host controller.
+ This function is used to synchronize with the hardware.
+
+ @param Ehc The EHCI device.
+ @param Timeout The time to wait before abort (in millisecond, ms).
+
+ @retval EFI_TIMEOUT Time out happened while waiting door bell to set.
+ @retval EFI_SUCCESS Synchronized with the hardware.
+
+**/
+EFI_STATUS
+EhcSetAndWaitDoorBell (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+;
+
+/**
+ Clear all the interrutp status bits, these bits
+ are Write-Clean.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhcAckAllInterrupt (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Check whether Ehc is halted.
+
+ @param Ehc The EHCI device.
+
+ @retval TRUE The controller is halted.
+ @retval FALSE The controller isn't halted.
+
+**/
+BOOLEAN
+EhcIsHalt (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Check whether system error occurred.
+
+ @param Ehc The EHCI device.
+
+ @retval TRUE System error happened.
+ @retval FALSE No system error.
+
+**/
+BOOLEAN
+EhcIsSysError (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Reset the host controller.
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort (in millisecond, ms).
+
+ @retval EFI_TIMEOUT The transfer failed due to time out.
+ @retval Others Failed to reset the host.
+
+**/
+EFI_STATUS
+EhcResetHC (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+;
+
+/**
+ Halt the host controller.
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort.
+
+ @retval EFI_TIMEOUT Failed to halt the controller before Timeout.
+ @retval EFI_SUCCESS The EHCI is halt.
+
+**/
+EFI_STATUS
+EhcHaltHC (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+;
+
+/**
+ Set the EHCI to run
+
+ @param Ehc The EHCI device.
+ @param Timeout Time to wait before abort.
+
+ @retval EFI_SUCCESS The EHCI is running.
+ @retval Others Failed to set the EHCI to run.
+
+**/
+EFI_STATUS
+EhcRunHC (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT32 Timeout
+ )
+;
+
+/**
+ Initialize the HC hardware.
+ EHCI spec lists the five things to do to initialize the hardware.
+ 1. Program CTRLDSSEGMENT.
+ 2. Set USBINTR to enable interrupts.
+ 3. Set periodic list base.
+ 4. Set USBCMD, interrupt threshold, frame list size etc.
+ 5. Write 1 to CONFIGFLAG to route all ports to EHCI.
+
+ @param Ehc The EHCI device.
+
+ @retval EFI_SUCCESS The EHCI has come out of halt state.
+ @retval EFI_TIMEOUT Time out happened.
+
+**/
+EFI_STATUS
+EhcInitHC (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+#endif
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c new file mode 100644 index 0000000000..d153aa39dc --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c @@ -0,0 +1,873 @@ +/** @file
+PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+which is used to enable recovery function from USB Drivers.
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "EhcPeim.h"
+
+/**
+ Create helper QTD/QH for the EHCI device.
+
+ @param Ehc The EHCI device.
+
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate resource for helper QTD/QH.
+ @retval EFI_SUCCESS Helper QH/QTD are created.
+
+**/
+EFI_STATUS
+EhcCreateHelpQ (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ USB_ENDPOINT Ep;
+ PEI_EHC_QH *Qh;
+ QH_HW *QhHw;
+ PEI_EHC_QTD *Qtd;
+
+ //
+ // Create an inactive Qtd to terminate the short packet read.
+ //
+ Qtd = EhcCreateQtd (Ehc, NULL, 0, QTD_PID_INPUT, 0, 64);
+
+ if (Qtd == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Qtd->QtdHw.Status = QTD_STAT_HALTED;
+ Ehc->ShortReadStop = Qtd;
+
+ //
+ // Create a QH to act as the EHC reclamation header.
+ // Set the header to loopback to itself.
+ //
+ Ep.DevAddr = 0;
+ Ep.EpAddr = 1;
+ Ep.Direction = EfiUsbDataIn;
+ Ep.DevSpeed = EFI_USB_SPEED_HIGH;
+ Ep.MaxPacket = 64;
+ Ep.HubAddr = 0;
+ Ep.HubPort = 0;
+ Ep.Toggle = 0;
+ Ep.Type = EHC_BULK_TRANSFER;
+ Ep.PollRate = 1;
+
+ Qh = EhcCreateQh (Ehc, &Ep);
+
+ if (Qh == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ QhHw = &Qh->QhHw;
+ QhHw->HorizonLink = QH_LINK (QhHw, EHC_TYPE_QH, FALSE);
+ QhHw->Status = QTD_STAT_HALTED;
+ QhHw->ReclaimHead = 1;
+ Ehc->ReclaimHead = Qh;
+
+ //
+ // Create a dummy QH to act as the terminator for periodical schedule
+ //
+ Ep.EpAddr = 2;
+ Ep.Type = EHC_INT_TRANSFER_SYNC;
+
+ Qh = EhcCreateQh (Ehc, &Ep);
+
+ if (Qh == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Qh->QhHw.Status = QTD_STAT_HALTED;
+ Ehc->PeriodOne = Qh;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize the schedule data structure such as frame list.
+
+ @param Ehc The EHCI device to init schedule data for.
+
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate resource to init schedule data.
+ @retval EFI_SUCCESS The schedule data is initialized.
+
+**/
+EFI_STATUS
+EhcInitSched (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ VOID *Map;
+ UINTN Index;
+ UINT32 *Desc;
+ EFI_STATUS Status;
+
+ //
+ // First initialize the periodical schedule data:
+ // 1. Allocate and map the memory for the frame list
+ // 2. Create the help QTD/QH
+ // 3. Initialize the frame entries
+ // 4. Set the frame list register
+ //
+ //
+ // The Frame List ocupies 4K bytes,
+ // and must be aligned on 4-Kbyte boundaries.
+ //
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ 1,
+ &PhyAddr
+ );
+
+ Map = NULL;
+ Ehc->PeriodFrameHost = (VOID *)(UINTN)PhyAddr;
+ Ehc->PeriodFrame = (VOID *)(UINTN)PhyAddr;
+ Ehc->PeriodFrameMap = Map;
+ Ehc->High32bitAddr = EHC_HIGH_32BIT (PhyAddr);
+
+ //
+ // Init memory pool management then create the helper
+ // QTD/QH. If failed, previously allocated resources
+ // will be freed by EhcFreeSched
+ //
+ Ehc->MemPool = UsbHcInitMemPool (
+ Ehc,
+ EHC_BIT_IS_SET (Ehc->HcCapParams, HCCP_64BIT),
+ Ehc->High32bitAddr
+ );
+
+ if (Ehc->MemPool == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = EhcCreateHelpQ (Ehc);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Initialize the frame list entries then set the registers
+ //
+ Desc = (UINT32 *) Ehc->PeriodFrame;
+
+ for (Index = 0; Index < EHC_FRAME_LEN; Index++) {
+ Desc[Index] = QH_LINK (Ehc->PeriodOne, EHC_TYPE_QH, FALSE);
+ }
+
+ EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT (Ehc->PeriodFrame));
+
+ //
+ // Second initialize the asynchronous schedule:
+ // Only need to set the AsynListAddr register to
+ // the reclamation header
+ //
+ EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT (Ehc->ReclaimHead));
+ return EFI_SUCCESS;
+}
+
+/**
+ Free the schedule data. It may be partially initialized.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhcFreeSched (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, 0);
+ EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, 0);
+
+ if (Ehc->PeriodOne != NULL) {
+ UsbHcFreeMem (Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
+ Ehc->PeriodOne = NULL;
+ }
+
+ if (Ehc->ReclaimHead != NULL) {
+ UsbHcFreeMem (Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
+ Ehc->ReclaimHead = NULL;
+ }
+
+ if (Ehc->ShortReadStop != NULL) {
+ UsbHcFreeMem (Ehc->MemPool, Ehc->ShortReadStop, sizeof (PEI_EHC_QTD));
+ Ehc->ShortReadStop = NULL;
+ }
+
+ if (Ehc->MemPool != NULL) {
+ UsbHcFreeMemPool (Ehc->MemPool);
+ Ehc->MemPool = NULL;
+ }
+
+ if (Ehc->PeriodFrame != NULL) {
+ Ehc->PeriodFrame = NULL;
+ }
+}
+
+/**
+ Link the queue head to the asynchronous schedule list.
+ UEFI only supports one CTRL/BULK transfer at a time
+ due to its interfaces. This simplifies the AsynList
+ management: A reclamation header is always linked to
+ the AsyncListAddr, the only active QH is appended to it.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to link.
+
+**/
+VOID
+EhcLinkQhToAsync (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+{
+ PEI_EHC_QH *Head;
+
+ //
+ // Append the queue head after the reclaim header, then
+ // fix the hardware visiable parts (EHCI R1.0 page 72).
+ // ReclaimHead is always linked to the EHCI's AsynListAddr.
+ //
+ Head = Ehc->ReclaimHead;
+
+ Qh->NextQh = Head->NextQh;
+ Head->NextQh = Qh;
+
+ Qh->QhHw.HorizonLink = QH_LINK (Head, EHC_TYPE_QH, FALSE);;
+ Head->QhHw.HorizonLink = QH_LINK (Qh, EHC_TYPE_QH, FALSE);
+}
+
+/**
+ Unlink a queue head from the asynchronous schedule list.
+ Need to synchronize with hardware.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to unlink.
+
+**/
+VOID
+EhcUnlinkQhFromAsync (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+{
+ PEI_EHC_QH *Head;
+ EFI_STATUS Status;
+
+ ASSERT (Ehc->ReclaimHead->NextQh == Qh);
+
+ //
+ // Remove the QH from reclamation head, then update the hardware
+ // visiable part: Only need to loopback the ReclaimHead. The Qh
+ // is pointing to ReclaimHead (which is staill in the list).
+ //
+ Head = Ehc->ReclaimHead;
+
+ Head->NextQh = Qh->NextQh;
+ Qh->NextQh = NULL;
+
+ Head->QhHw.HorizonLink = QH_LINK (Head, EHC_TYPE_QH, FALSE);
+
+ //
+ // Set and wait the door bell to synchronize with the hardware
+ //
+ Status = EhcSetAndWaitDoorBell (Ehc, EHC_GENERIC_TIMEOUT);
+
+ return;
+}
+
+/**
+ Link a queue head for interrupt transfer to the periodic
+ schedule frame list. This code is very much the same as
+ that in UHCI.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to link.
+
+**/
+VOID
+EhcLinkQhToPeriod (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+{
+ UINT32 *Frames;
+ UINTN Index;
+ PEI_EHC_QH *Prev;
+ PEI_EHC_QH *Next;
+
+ Frames = Ehc->PeriodFrame;
+
+ for (Index = 0; Index < EHC_FRAME_LEN; Index += Qh->Interval) {
+ //
+ // First QH can't be NULL because we always keep PeriodOne
+ // heads on the frame list
+ //
+ ASSERT (!EHC_LINK_TERMINATED (Frames[Index]));
+ Next = EHC_ADDR (Ehc->High32bitAddr, Frames[Index]);
+ Prev = NULL;
+
+ //
+ // Now, insert the queue head (Qh) into this frame:
+ // 1. Find a queue head with the same poll interval, just insert
+ // Qh after this queue head, then we are done.
+ //
+ // 2. Find the position to insert the queue head into:
+ // Previous head's interval is bigger than Qh's
+ // Next head's interval is less than Qh's
+ // Then, insert the Qh between then
+ //
+ while (Next->Interval > Qh->Interval) {
+ Prev = Next;
+ Next = Next->NextQh;
+ }
+
+ ASSERT (Next != NULL);
+
+ //
+ // The entry may have been linked into the frame by early insertation.
+ // For example: if insert a Qh with Qh.Interval == 4, and there is a Qh
+ // with Qh.Interval == 8 on the frame. If so, we are done with this frame.
+ // It isn't necessary to compare all the QH with the same interval to
+ // Qh. This is because if there is other QH with the same interval, Qh
+ // should has been inserted after that at Frames[0] and at Frames[0] it is
+ // impossible for (Next == Qh)
+ //
+ if (Next == Qh) {
+ continue;
+ }
+
+ if (Next->Interval == Qh->Interval) {
+ //
+ // If there is a QH with the same interval, it locates at
+ // Frames[0], and we can simply insert it after this QH. We
+ // are all done.
+ //
+ ASSERT ((Index == 0) && (Qh->NextQh == NULL));
+
+ Prev = Next;
+ Next = Next->NextQh;
+
+ Qh->NextQh = Next;
+ Prev->NextQh = Qh;
+
+ Qh->QhHw.HorizonLink = Prev->QhHw.HorizonLink;
+ Prev->QhHw.HorizonLink = QH_LINK (Qh, EHC_TYPE_QH, FALSE);
+ break;
+ }
+
+ //
+ // OK, find the right position, insert it in. If Qh's next
+ // link has already been set, it is in position. This is
+ // guarranted by 2^n polling interval.
+ //
+ if (Qh->NextQh == NULL) {
+ Qh->NextQh = Next;
+ Qh->QhHw.HorizonLink = QH_LINK (Next, EHC_TYPE_QH, FALSE);
+ }
+
+ if (Prev == NULL) {
+ Frames[Index] = QH_LINK (Qh, EHC_TYPE_QH, FALSE);
+ } else {
+ Prev->NextQh = Qh;
+ Prev->QhHw.HorizonLink = QH_LINK (Qh, EHC_TYPE_QH, FALSE);
+ }
+ }
+}
+
+/**
+ Unlink an interrupt queue head from the periodic
+ schedule frame list.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to unlink.
+
+**/
+VOID
+EhcUnlinkQhFromPeriod (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+{
+ UINT32 *Frames;
+ UINTN Index;
+ PEI_EHC_QH *Prev;
+ PEI_EHC_QH *This;
+
+ Frames = Ehc->PeriodFrame;
+
+ for (Index = 0; Index < EHC_FRAME_LEN; Index += Qh->Interval) {
+ //
+ // Frame link can't be NULL because we always keep PeroidOne
+ // on the frame list
+ //
+ ASSERT (!EHC_LINK_TERMINATED (Frames[Index]));
+ This = EHC_ADDR (Ehc->High32bitAddr, Frames[Index]);
+ Prev = NULL;
+
+ //
+ // Walk through the frame's QH list to find the
+ // queue head to remove
+ //
+ while ((This != NULL) && (This != Qh)) {
+ Prev = This;
+ This = This->NextQh;
+ }
+
+ //
+ // Qh may have already been unlinked from this frame
+ // by early action. See the comments in EhcLinkQhToPeriod.
+ //
+ if (This == NULL) {
+ continue;
+ }
+
+ if (Prev == NULL) {
+ //
+ // Qh is the first entry in the frame
+ //
+ Frames[Index] = Qh->QhHw.HorizonLink;
+ } else {
+ Prev->NextQh = Qh->NextQh;
+ Prev->QhHw.HorizonLink = Qh->QhHw.HorizonLink;
+ }
+ }
+}
+
+/**
+ Check the URB's execution result and update the URB's
+ result accordingly.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to check result.
+
+ @retval TRUE URB transfer is finialized.
+ @retval FALSE URB transfer is not finialized.
+
+**/
+BOOLEAN
+EhcCheckUrbResult (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb
+ )
+{
+ EFI_LIST_ENTRY *Entry;
+ PEI_EHC_QTD *Qtd;
+ QTD_HW *QtdHw;
+ UINT8 State;
+ BOOLEAN Finished;
+
+ ASSERT ((Ehc != NULL) && (Urb != NULL) && (Urb->Qh != NULL));
+
+ Finished = TRUE;
+ Urb->Completed = 0;
+
+ Urb->Result = EFI_USB_NOERROR;
+
+ if (EhcIsHalt (Ehc) || EhcIsSysError (Ehc)) {
+ Urb->Result |= EFI_USB_ERR_SYSTEM;
+ goto ON_EXIT;
+ }
+
+ EFI_LIST_FOR_EACH (Entry, &Urb->Qh->Qtds) {
+ Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
+ QtdHw = &Qtd->QtdHw;
+ State = (UINT8) QtdHw->Status;
+
+ if (EHC_BIT_IS_SET (State, QTD_STAT_HALTED)) {
+ //
+ // EHCI will halt the queue head when met some error.
+ // If it is halted, the result of URB is finialized.
+ //
+ if ((State & QTD_STAT_ERR_MASK) == 0) {
+ Urb->Result |= EFI_USB_ERR_STALL;
+ }
+
+ if (EHC_BIT_IS_SET (State, QTD_STAT_BABBLE_ERR)) {
+ Urb->Result |= EFI_USB_ERR_BABBLE;
+ }
+
+ if (EHC_BIT_IS_SET (State, QTD_STAT_BUFF_ERR)) {
+ Urb->Result |= EFI_USB_ERR_BUFFER;
+ }
+
+ if (EHC_BIT_IS_SET (State, QTD_STAT_TRANS_ERR) && (QtdHw->ErrCnt == 0)) {
+ Urb->Result |= EFI_USB_ERR_TIMEOUT;
+ }
+
+ Finished = TRUE;
+ goto ON_EXIT;
+
+ } else if (EHC_BIT_IS_SET (State, QTD_STAT_ACTIVE)) {
+ //
+ // The QTD is still active, no need to check furthur.
+ //
+ Urb->Result |= EFI_USB_ERR_NOTEXECUTE;
+
+ Finished = FALSE;
+ goto ON_EXIT;
+
+ } else {
+ //
+ // This QTD is finished OK or met short packet read. Update the
+ // transfer length if it isn't a setup.
+ //
+ if (QtdHw->Pid != QTD_PID_SETUP) {
+ Urb->Completed += Qtd->DataLen - QtdHw->TotalBytes;
+ }
+
+ if ((QtdHw->TotalBytes != 0) && (QtdHw->Pid == QTD_PID_INPUT)) {
+ //EHC_DUMP_QH ((Urb->Qh, "Short packet read", FALSE));
+
+ //
+ // Short packet read condition. If it isn't a setup transfer,
+ // no need to check furthur: the queue head will halt at the
+ // ShortReadStop. If it is a setup transfer, need to check the
+ // Status Stage of the setup transfer to get the finial result
+ //
+ if (QtdHw->AltNext == QTD_LINK (Ehc->ShortReadStop, FALSE)) {
+
+ Finished = TRUE;
+ goto ON_EXIT;
+ }
+ }
+ }
+ }
+
+ON_EXIT:
+ //
+ // Return the data toggle set by EHCI hardware, bulk and interrupt
+ // transfer will use this to initialize the next transaction. For
+ // Control transfer, it always start a new data toggle sequence for
+ // new transfer.
+ //
+ // NOTICE: don't move DT update before the loop, otherwise there is
+ // a race condition that DT is wrong.
+ //
+ Urb->DataToggle = (UINT8) Urb->Qh->QhHw.DataToggle;
+
+ return Finished;
+}
+
+/**
+ Execute the transfer by polling the URB. This is a synchronous operation.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to execute.
+ @param TimeOut The time to wait before abort, in millisecond.
+
+ @retval EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @retval EFI_TIMEOUT The transfer failed due to time out.
+ @retval EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+EhcExecTransfer (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb,
+ IN UINTN TimeOut
+ )
+{
+ EFI_STATUS Status;
+ UINTN Index;
+ UINTN Loop;
+ BOOLEAN Finished;
+
+ Status = EFI_SUCCESS;
+ Loop = (TimeOut * EHC_1_MILLISECOND / EHC_SYNC_POLL_INTERVAL) + 1;
+ Finished = FALSE;
+
+ for (Index = 0; Index < Loop; Index++) {
+ Finished = EhcCheckUrbResult (Ehc, Urb);
+
+ if (Finished) {
+ break;
+ }
+
+ MicroSecondDelay (EHC_SYNC_POLL_INTERVAL);
+ }
+
+ if (!Finished) {
+ Status = EFI_TIMEOUT;
+ } else if (Urb->Result != EFI_USB_NOERROR) {
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ return Status;
+}
+
+/**
+ Delete a single asynchronous interrupt transfer for
+ the device and endpoint.
+
+ @param Ehc The EHCI device.
+ @param DevAddr The address of the target device.
+ @param EpNum The endpoint of the target.
+ @param DataToggle Return the next data toggle to use.
+
+ @retval EFI_NOT_FOUND No transfer for the device is found.
+ @retval EFI_SUCCESS An asynchronous transfer is removed.
+
+**/
+EFI_STATUS
+EhciDelAsyncIntTransfer (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT8 DevAddr,
+ IN UINT8 EpNum,
+ OUT UINT8 *DataToggle
+ )
+{
+ EFI_LIST_ENTRY *Entry;
+ EFI_LIST_ENTRY *Next;
+ PEI_URB *Urb;
+ EFI_USB_DATA_DIRECTION Direction;
+
+ Direction = (((EpNum & 0x80) != 0) ? EfiUsbDataIn : EfiUsbDataOut);
+ EpNum &= 0x0F;
+
+ EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Ehc->AsyncIntTransfers) {
+ Urb = EFI_LIST_CONTAINER (Entry, PEI_URB, UrbList);
+
+ if ((Urb->Ep.DevAddr == DevAddr) && (Urb->Ep.EpAddr == EpNum) &&
+ (Urb->Ep.Direction == Direction)) {
+ //
+ // Check the URB status to retrieve the next data toggle
+ // from the associated queue head.
+ //
+ EhcCheckUrbResult (Ehc, Urb);
+ *DataToggle = Urb->DataToggle;
+
+ EhcUnlinkQhFromPeriod (Ehc, Urb->Qh);
+ RemoveEntryList (&Urb->UrbList);
+
+ EhcFreeUrb (Ehc, Urb);
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Remove all the asynchronous interrutp transfers.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhciDelAllAsyncIntTransfers (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+{
+ EFI_LIST_ENTRY *Entry;
+ EFI_LIST_ENTRY *Next;
+ PEI_URB *Urb;
+
+ EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Ehc->AsyncIntTransfers) {
+ Urb = EFI_LIST_CONTAINER (Entry, PEI_URB, UrbList);
+
+ EhcUnlinkQhFromPeriod (Ehc, Urb->Qh);
+ RemoveEntryList (&Urb->UrbList);
+
+ EhcFreeUrb (Ehc, Urb);
+ }
+}
+
+/**
+ Flush data from PCI controller specific address to mapped system
+ memory address.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to unmap.
+
+ @retval EFI_DEVICE_ERROR Fail to flush data to mapped system memory.
+ @retval EFI_SUCCESS Success to flush data to mapped system memory.
+
+**/
+EFI_STATUS
+EhcFlushAsyncIntMap (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb
+ )
+{
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+
+ Urb->DataMap = NULL;
+ PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Urb->Data;
+ Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
+ return EFI_SUCCESS;
+}
+
+/**
+ Update the queue head for next round of asynchronous transfer.
+
+ @param Urb The URB to update.
+
+**/
+VOID
+EhcUpdateAsyncRequest (
+ IN PEI_URB *Urb
+ )
+{
+ EFI_LIST_ENTRY *Entry;
+ PEI_EHC_QTD *FirstQtd;
+ QH_HW *QhHw;
+ PEI_EHC_QTD *Qtd;
+ QTD_HW *QtdHw;
+ UINTN Index;
+
+ Qtd = NULL;
+
+ if (Urb->Result == EFI_USB_NOERROR) {
+ FirstQtd = NULL;
+
+ EFI_LIST_FOR_EACH (Entry, &Urb->Qh->Qtds) {
+ Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
+
+ if (FirstQtd == NULL) {
+ FirstQtd = Qtd;
+ }
+
+ //
+ // Update the QTD for next round of transfer. Host control
+ // may change dt/Total Bytes to Transfer/C_Page/Cerr/Status/
+ // Current Offset. These fields need to be updated. DT isn't
+ // used by interrupt transfer. It uses DT in queue head.
+ // Current Offset is in Page[0], only need to reset Page[0]
+ // to initial data buffer.
+ //
+ QtdHw = &Qtd->QtdHw;
+ QtdHw->Status = QTD_STAT_ACTIVE;
+ QtdHw->ErrCnt = QTD_MAX_ERR;
+ QtdHw->CurPage = 0;
+ QtdHw->TotalBytes = (UINT32) Qtd->DataLen;
+ QtdHw->Page[0] = EHC_LOW_32BIT (Qtd->Data);
+ }
+
+ //
+ // Update QH for next round of transfer. Host control only
+ // touch the fields in transfer overlay area. Only need to
+ // zero out the overlay area and set NextQtd to the first
+ // QTD. DateToggle bit is left untouched.
+ //
+ QhHw = &Urb->Qh->QhHw;
+ QhHw->CurQtd = QTD_LINK (0, TRUE);
+ QhHw->AltQtd = 0;
+
+ QhHw->Status = 0;
+ QhHw->Pid = 0;
+ QhHw->ErrCnt = 0;
+ QhHw->CurPage = 0;
+ QhHw->Ioc = 0;
+ QhHw->TotalBytes = 0;
+
+ for (Index = 0; Index < 5; Index++) {
+ QhHw->Page[Index] = 0;
+ QhHw->PageHigh[Index] = 0;
+ }
+
+ QhHw->NextQtd = QTD_LINK (FirstQtd, FALSE);
+ }
+
+ return ;
+}
+
+/**
+ Remove all the asynchronous interrutp transfers.
+
+ @param Event Interrupt event.
+ @param Context Pointer to PEI_USB2_HC_DEV.
+
+**/
+VOID
+EFIAPI
+EhcMoniteAsyncRequests (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+ EFI_LIST_ENTRY *Entry;
+ EFI_LIST_ENTRY *Next;
+ BOOLEAN Finished;
+ UINT8 *ProcBuf;
+ PEI_URB *Urb;
+ EFI_STATUS Status;
+ UINTN PageNumber;
+
+ Ehc = (PEI_USB2_HC_DEV *) Context;
+
+ EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Ehc->AsyncIntTransfers) {
+ Urb = EFI_LIST_CONTAINER (Entry, PEI_URB, UrbList);
+
+ //
+ // Check the result of URB execution. If it is still
+ // active, check the next one.
+ //
+ Finished = EhcCheckUrbResult (Ehc, Urb);
+
+ if (!Finished) {
+ continue;
+ }
+
+ //
+ // Flush any PCI posted write transactions from a PCI host
+ // bridge to system memory.
+ //
+ Status = EhcFlushAsyncIntMap (Ehc, Urb);
+
+ //
+ // Allocate a buffer then copy the transferred data for user.
+ // If failed to allocate the buffer, update the URB for next
+ // round of transfer. Ignore the data of this round.
+ //
+ ProcBuf = NULL;
+
+ if (Urb->Result == EFI_USB_NOERROR) {
+ ASSERT (Urb->Completed <= Urb->DataLen);
+ PageNumber = Urb->Completed/PAGESIZE +1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ PageNumber,
+ (EFI_PHYSICAL_ADDRESS *)ProcBuf
+ );
+ if (ProcBuf == NULL) {
+ EhcUpdateAsyncRequest (Urb);
+ continue;
+ }
+
+ CopyMem (ProcBuf, Urb->Data, Urb->Completed);
+ }
+
+ EhcUpdateAsyncRequest (Urb);
+
+ //
+ // Leave error recovery to its related device driver. A
+ // common case of the error recovery is to re-submit the
+ // interrupt transfer which is linked to the head of the
+ // list. This function scans from head to tail. So the
+ // re-submitted interrupt transfer's callback function
+ // will not be called again in this round. Don't touch this
+ // URB after the callback, it may have been removed by the
+ // callback.
+ //
+ if (Urb->Callback != NULL) {
+ (Urb->Callback) (ProcBuf, Urb->Completed, Urb->Context, Urb->Result);
+ }
+
+ if (ProcBuf != NULL) {
+ }
+ }
+}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h new file mode 100644 index 0000000000..0eb90f86d1 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h @@ -0,0 +1,180 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EFI_EHCI_SCHED_H_
+#define _EFI_EHCI_SCHED_H_
+
+/**
+ Initialize the schedule data structure such as frame list.
+
+ @param Ehc The EHCI device to init schedule data for.
+
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate resource to init schedule data.
+ @retval EFI_SUCCESS The schedule data is initialized.
+
+**/
+EFI_STATUS
+EhcInitSched (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Free the schedule data. It may be partially initialized.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhcFreeSched (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Link the queue head to the asynchronous schedule list.
+ UEFI only supports one CTRL/BULK transfer at a time
+ due to its interfaces. This simplifies the AsynList
+ management: A reclamation header is always linked to
+ the AsyncListAddr, the only active QH is appended to it.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to link.
+
+**/
+VOID
+EhcLinkQhToAsync (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+;
+
+/**
+ Unlink a queue head from the asynchronous schedule list.
+ Need to synchronize with hardware.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to unlink.
+
+**/
+VOID
+EhcUnlinkQhFromAsync (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+;
+
+/**
+ Link a queue head for interrupt transfer to the periodic
+ schedule frame list. This code is very much the same as
+ that in UHCI.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to link.
+
+**/
+VOID
+EhcLinkQhToPeriod (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+;
+
+/**
+ Unlink an interrupt queue head from the periodic
+ schedule frame list.
+
+ @param Ehc The EHCI device.
+ @param Qh The queue head to unlink.
+
+**/
+VOID
+EhcUnlinkQhFromPeriod (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_EHC_QH *Qh
+ )
+;
+
+/**
+ Execute the transfer by polling the URB. This is a synchronous operation.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to execute.
+ @param TimeOut The time to wait before abort, in millisecond.
+
+ @retval EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @retval EFI_TIMEOUT The transfer failed due to time out.
+ @retval EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+EhcExecTransfer (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb,
+ IN UINTN TimeOut
+ )
+;
+
+/**
+ Delete a single asynchronous interrupt transfer for
+ the device and endpoint.
+
+ @param Ehc The EHCI device.
+ @param DevAddr The address of the target device.
+ @param EpNum The endpoint of the target.
+ @param DataToggle Return the next data toggle to use.
+
+ @retval EFI_NOT_FOUND No transfer for the device is found.
+ @retval EFI_SUCCESS An asynchronous transfer is removed.
+
+**/
+EFI_STATUS
+EhciDelAsyncIntTransfer (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT8 DevAddr,
+ IN UINT8 EpNum,
+ OUT UINT8 *DataToggle
+ )
+;
+
+/**
+ Remove all the asynchronous interrutp transfers.
+
+ @param Ehc The EHCI device.
+
+**/
+VOID
+EhciDelAllAsyncIntTransfers (
+ IN PEI_USB2_HC_DEV *Ehc
+ )
+;
+
+/**
+ Remove all the asynchronous interrutp transfers.
+
+ @param Event Interrupt event.
+ @param Context Pointer to PEI_USB2_HC_DEV.
+
+**/
+VOID
+EFIAPI
+EhcMoniteAsyncRequests (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+;
+
+#endif
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c new file mode 100644 index 0000000000..597a4947f5 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c @@ -0,0 +1,610 @@ +/** @file
+PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+which is used to enable recovery function from USB Drivers.
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "EhcPeim.h"
+
+/**
+ Delete a single asynchronous interrupt transfer for
+ the device and endpoint.
+
+ @param Ehc The EHCI device.
+ @param Data Current data not associated with a QTD.
+ @param DataLen The length of the data.
+ @param PktId Packet ID to use in the QTD.
+ @param Toggle Data toggle to use in the QTD.
+ @param MaxPacket Maximu packet length of the endpoint.
+
+ @retval the pointer to the created QTD or NULL if failed to create one.
+
+**/
+PEI_EHC_QTD *
+EhcCreateQtd (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT8 *Data,
+ IN UINTN DataLen,
+ IN UINT8 PktId,
+ IN UINT8 Toggle,
+ IN UINTN MaxPacket
+ )
+{
+ PEI_EHC_QTD *Qtd;
+ QTD_HW *QtdHw;
+ UINTN Index;
+ UINTN Len;
+ UINTN ThisBufLen;
+
+ ASSERT (Ehc != NULL);
+
+ Qtd = UsbHcAllocateMem (Ehc, Ehc->MemPool, sizeof (PEI_EHC_QTD));
+
+ if (Qtd == NULL) {
+ return NULL;
+ }
+
+ Qtd->Signature = EHC_QTD_SIG;
+ Qtd->Data = Data;
+ Qtd->DataLen = 0;
+
+ InitializeListHead (&Qtd->QtdList);
+
+ QtdHw = &Qtd->QtdHw;
+ QtdHw->NextQtd = QTD_LINK (NULL, TRUE);
+ QtdHw->AltNext = QTD_LINK (NULL, TRUE);
+ QtdHw->Status = QTD_STAT_ACTIVE;
+ QtdHw->Pid = PktId;
+ QtdHw->ErrCnt = QTD_MAX_ERR;
+ QtdHw->Ioc = 0;
+ QtdHw->TotalBytes = 0;
+ QtdHw->DataToggle = Toggle;
+
+ //
+ // Fill in the buffer points
+ //
+ if (Data != NULL) {
+ Len = 0;
+
+ for (Index = 0; Index <= QTD_MAX_BUFFER; Index++) {
+ //
+ // Set the buffer point (Check page 41 EHCI Spec 1.0). No need to
+ // compute the offset and clear Reserved fields. This is already
+ // done in the data point.
+ //
+ QtdHw->Page[Index] = EHC_LOW_32BIT (Data);
+ QtdHw->PageHigh[Index] = EHC_HIGH_32BIT (Data);
+
+ ThisBufLen = QTD_BUF_LEN - (EHC_LOW_32BIT (Data) & QTD_BUF_MASK);
+
+ if (Len + ThisBufLen >= DataLen) {
+ Len = DataLen;
+ break;
+ }
+
+ Len += ThisBufLen;
+ Data += ThisBufLen;
+ }
+
+ //
+ // Need to fix the last pointer if the Qtd can't hold all the
+ // user's data to make sure that the length is in the unit of
+ // max packets. If it can hold all the data, there is no such
+ // need.
+ //
+ if (Len < DataLen) {
+ Len = Len - Len % MaxPacket;
+ }
+
+ QtdHw->TotalBytes = (UINT32) Len;
+ Qtd->DataLen = Len;
+ }
+
+ return Qtd;
+}
+
+/**
+ Initialize the queue head for interrupt transfer,
+ that is, initialize the following three fields:
+ 1. SplitXState in the Status field.
+ 2. Microframe S-mask.
+ 3. Microframe C-mask.
+
+ @param Ep The queue head's related endpoint.
+ @param QhHw The queue head to initialize.
+
+**/
+VOID
+EhcInitIntQh (
+ IN USB_ENDPOINT *Ep,
+ IN QH_HW *QhHw
+ )
+{
+ //
+ // Because UEFI interface can't utilitize an endpoint with
+ // poll rate faster than 1ms, only need to set one bit in
+ // the queue head. simple. But it may be changed later. If
+ // sub-1ms interrupt is supported, need to update the S-Mask
+ // here
+ //
+ if (Ep->DevSpeed == EFI_USB_SPEED_HIGH) {
+ QhHw->SMask = QH_MICROFRAME_0;
+ return ;
+ }
+
+ //
+ // For low/full speed device, the transfer must go through
+ // the split transaction. Need to update three fields
+ // 1. SplitXState in the status
+ // 2. Microframe S-Mask
+ // 3. Microframe C-Mask
+ // UEFI USB doesn't exercise admission control. It simplely
+ // schedule the high speed transactions in microframe 0, and
+ // full/low speed transactions at microframe 1. This also
+ // avoid the use of FSTN.
+ //
+ QhHw->SMask = QH_MICROFRAME_1;
+ QhHw->CMask = QH_MICROFRAME_3 | QH_MICROFRAME_4 | QH_MICROFRAME_5;
+}
+
+/**
+ Allocate and initialize a EHCI queue head.
+
+ @param Ehci The EHCI device.
+ @param Ep The endpoint to create queue head for.
+
+ @retval the pointer to the created queue head or NULL if failed to create one.
+
+**/
+PEI_EHC_QH *
+EhcCreateQh (
+ IN PEI_USB2_HC_DEV *Ehci,
+ IN USB_ENDPOINT *Ep
+ )
+{
+ PEI_EHC_QH *Qh;
+ QH_HW *QhHw;
+
+ Qh = UsbHcAllocateMem (Ehci, Ehci->MemPool, sizeof (PEI_EHC_QH));
+
+ if (Qh == NULL) {
+ return NULL;
+ }
+
+ Qh->Signature = EHC_QH_SIG;
+ Qh->NextQh = NULL;
+ Qh->Interval = Ep->PollRate;
+
+ InitializeListHead (&Qh->Qtds);
+
+ QhHw = &Qh->QhHw;
+ QhHw->HorizonLink = QH_LINK (NULL, 0, TRUE);
+ QhHw->DeviceAddr = Ep->DevAddr;
+ QhHw->Inactive = 0;
+ QhHw->EpNum = Ep->EpAddr;
+ QhHw->EpSpeed = Ep->DevSpeed;
+ QhHw->DtCtrl = 0;
+ QhHw->ReclaimHead = 0;
+ QhHw->MaxPacketLen = (UINT32) Ep->MaxPacket;
+ QhHw->CtrlEp = 0;
+ QhHw->NakReload = QH_NAK_RELOAD;
+ QhHw->HubAddr = Ep->HubAddr;
+ QhHw->PortNum = Ep->HubPort;
+ QhHw->Multiplier = 1;
+ QhHw->DataToggle = Ep->Toggle;
+
+ if (Ep->DevSpeed != EFI_USB_SPEED_HIGH) {
+ QhHw->Status |= QTD_STAT_DO_SS;
+ }
+
+ switch (Ep->Type) {
+ case EHC_CTRL_TRANSFER:
+ //
+ // Special initialization for the control transfer:
+ // 1. Control transfer initialize data toggle from each QTD
+ // 2. Set the Control Endpoint Flag (C) for low/full speed endpoint.
+ //
+ QhHw->DtCtrl = 1;
+
+ if (Ep->DevSpeed != EFI_USB_SPEED_HIGH) {
+ QhHw->CtrlEp = 1;
+ }
+ break;
+
+ case EHC_INT_TRANSFER_ASYNC:
+ case EHC_INT_TRANSFER_SYNC:
+ //
+ // Special initialization for the interrupt transfer
+ // to set the S-Mask and C-Mask
+ //
+ QhHw->NakReload = 0;
+ EhcInitIntQh (Ep, QhHw);
+ break;
+
+ case EHC_BULK_TRANSFER:
+ if ((Ep->DevSpeed == EFI_USB_SPEED_HIGH) && (Ep->Direction == EfiUsbDataOut)) {
+ QhHw->Status |= QTD_STAT_DO_PING;
+ }
+
+ break;
+ }
+
+ return Qh;
+}
+
+/**
+ Convert the poll interval from application to that
+ be used by EHCI interface data structure. Only need
+ to get the max 2^n that is less than interval. UEFI
+ can't support high speed endpoint with a interval less
+ than 8 microframe because interval is specified in
+ the unit of ms (millisecond).
+
+ @param Interval The interval to convert.
+
+ @retval The converted interval.
+
+**/
+UINTN
+EhcConvertPollRate (
+ IN UINTN Interval
+ )
+{
+ UINTN BitCount;
+
+ if (Interval == 0) {
+ return 1;
+ }
+
+ //
+ // Find the index (1 based) of the highest non-zero bit
+ //
+ BitCount = 0;
+
+ while (Interval != 0) {
+ Interval >>= 1;
+ BitCount++;
+ }
+
+ return (UINTN)1 << (BitCount - 1);
+}
+
+/**
+ Free a list of QTDs.
+
+ @param Ehc The EHCI device.
+ @param Qtds The list head of the QTD.
+
+**/
+VOID
+EhcFreeQtds (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN EFI_LIST_ENTRY *Qtds
+ )
+{
+ EFI_LIST_ENTRY *Entry;
+ EFI_LIST_ENTRY *Next;
+ PEI_EHC_QTD *Qtd;
+
+ EFI_LIST_FOR_EACH_SAFE (Entry, Next, Qtds) {
+ Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
+
+ RemoveEntryList (&Qtd->QtdList);
+ UsbHcFreeMem (Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
+ }
+}
+
+/**
+ Free an allocated URB. It is possible for it to be partially inited.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to free.
+
+**/
+VOID
+EhcFreeUrb (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb
+ )
+{
+ if (Urb->Qh != NULL) {
+ //
+ // Ensure that this queue head has been unlinked from the
+ // schedule data structures. Free all the associated QTDs
+ //
+ EhcFreeQtds (Ehc, &Urb->Qh->Qtds);
+ UsbHcFreeMem (Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
+ }
+}
+
+/**
+ Create a list of QTDs for the URB.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to create QTDs for.
+
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate resource for QTD.
+ @retval EFI_SUCCESS The QTDs are allocated for the URB.
+
+**/
+EFI_STATUS
+EhcCreateQtds (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb
+ )
+{
+ USB_ENDPOINT *Ep;
+ PEI_EHC_QH *Qh;
+ PEI_EHC_QTD *Qtd;
+ PEI_EHC_QTD *StatusQtd;
+ PEI_EHC_QTD *NextQtd;
+ EFI_LIST_ENTRY *Entry;
+ UINT32 AlterNext;
+ UINT8 Toggle;
+ UINTN Len;
+ UINT8 Pid;
+
+ ASSERT ((Urb != NULL) && (Urb->Qh != NULL));
+
+ //
+ // EHCI follows the alternet next QTD pointer if it meets
+ // a short read and the AlterNext pointer is valid. UEFI
+ // EHCI driver should terminate the transfer except the
+ // control transfer.
+ //
+ Toggle = 0;
+ Qh = Urb->Qh;
+ Ep = &Urb->Ep;
+ StatusQtd = NULL;
+ AlterNext = QTD_LINK (NULL, TRUE);
+
+ if (Ep->Direction == EfiUsbDataIn) {
+ AlterNext = QTD_LINK (Ehc->ShortReadStop, FALSE);
+ }
+
+ //
+ // Build the Setup and status packets for control transfer
+ //
+ if (Urb->Ep.Type == EHC_CTRL_TRANSFER) {
+ Len = sizeof (EFI_USB_DEVICE_REQUEST);
+ Qtd = EhcCreateQtd (Ehc, Urb->RequestPhy, Len, QTD_PID_SETUP, 0, Ep->MaxPacket);
+
+ if (Qtd == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ InsertTailList (&Qh->Qtds, &Qtd->QtdList);
+
+ //
+ // Create the status packet now. Set the AlterNext to it. So, when
+ // EHCI meets a short control read, it can resume at the status stage.
+ // Use the opposite direction of the data stage, or IN if there is
+ // no data stage.
+ //
+ if (Ep->Direction == EfiUsbDataIn) {
+ Pid = QTD_PID_OUTPUT;
+ } else {
+ Pid = QTD_PID_INPUT;
+ }
+
+ StatusQtd = EhcCreateQtd (Ehc, NULL, 0, Pid, 1, Ep->MaxPacket);
+
+ if (StatusQtd == NULL) {
+ goto ON_ERROR;
+ }
+
+ if (Ep->Direction == EfiUsbDataIn) {
+ AlterNext = QTD_LINK (StatusQtd, FALSE);
+ }
+
+ Toggle = 1;
+ }
+
+ //
+ // Build the data packets for all the transfers
+ //
+ if (Ep->Direction == EfiUsbDataIn) {
+ Pid = QTD_PID_INPUT;
+ } else {
+ Pid = QTD_PID_OUTPUT;
+ }
+
+ Qtd = NULL;
+ Len = 0;
+
+ while (Len < Urb->DataLen) {
+ Qtd = EhcCreateQtd (
+ Ehc,
+ (UINT8 *) Urb->DataPhy + Len,
+ Urb->DataLen - Len,
+ Pid,
+ Toggle,
+ Ep->MaxPacket
+ );
+
+ if (Qtd == NULL) {
+ goto ON_ERROR;
+ }
+
+ Qtd->QtdHw.AltNext = AlterNext;
+ InsertTailList (&Qh->Qtds, &Qtd->QtdList);
+
+ //
+ // Switch the Toggle bit if odd number of packets are included in the QTD.
+ //
+ if (((Qtd->DataLen + Ep->MaxPacket - 1) / Ep->MaxPacket) % 2) {
+ Toggle = (UINT8) (1 - Toggle);
+ }
+
+ Len += Qtd->DataLen;
+ }
+
+ //
+ // Insert the status packet for control transfer
+ //
+ if (Ep->Type == EHC_CTRL_TRANSFER) {
+ InsertTailList (&Qh->Qtds, &StatusQtd->QtdList);
+ }
+
+ //
+ // OK, all the QTDs needed are created. Now, fix the NextQtd point
+ //
+ EFI_LIST_FOR_EACH (Entry, &Qh->Qtds) {
+ Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
+
+ //
+ // break if it is the last entry on the list
+ //
+ if (Entry->ForwardLink == &Qh->Qtds) {
+ break;
+ }
+
+ NextQtd = EFI_LIST_CONTAINER (Entry->ForwardLink, PEI_EHC_QTD, QtdList);
+ Qtd->QtdHw.NextQtd = QTD_LINK (NextQtd, FALSE);
+ }
+
+ //
+ // Link the QTDs to the queue head
+ //
+ NextQtd = EFI_LIST_CONTAINER (Qh->Qtds.ForwardLink, PEI_EHC_QTD, QtdList);
+ Qh->QhHw.NextQtd = QTD_LINK (NextQtd, FALSE);
+ return EFI_SUCCESS;
+
+ON_ERROR:
+ EhcFreeQtds (Ehc, &Qh->Qtds);
+ return EFI_OUT_OF_RESOURCES;
+}
+
+/**
+ Create a new URB and its associated QTD.
+
+ @param Ehc The EHCI device.
+ @param DevAddr The device address.
+ @param EpAddr Endpoint addrress & its direction.
+ @param DevSpeed The device speed.
+ @param Toggle Initial data toggle to use.
+ @param MaxPacket The max packet length of the endpoint.
+ @param Hub The transaction translator to use.
+ @param Type The transaction type.
+ @param Request The standard USB request for control transfer.
+ @param Data The user data to transfer.
+ @param DataLen The length of data buffer.
+ @param Callback The function to call when data is transferred.
+ @param Context The context to the callback.
+ @param Interval The interval for interrupt transfer.
+
+ @retval the pointer to the created URB or NULL.
+
+**/
+PEI_URB *
+EhcCreateUrb (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT8 DevAddr,
+ IN UINT8 EpAddr,
+ IN UINT8 DevSpeed,
+ IN UINT8 Toggle,
+ IN UINTN MaxPacket,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Hub,
+ IN UINTN Type,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN VOID *Data,
+ IN UINTN DataLen,
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK Callback,
+ IN VOID *Context,
+ IN UINTN Interval
+ )
+{
+ USB_ENDPOINT *Ep;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ EFI_STATUS Status;
+ UINTN Len;
+ PEI_URB *Urb;
+ VOID *Map;
+
+
+ Map = NULL;
+
+ Urb = Ehc->Urb;
+ Urb->Signature = EHC_URB_SIG;
+ InitializeListHead (&Urb->UrbList);
+
+ Ep = &Urb->Ep;
+ Ep->DevAddr = DevAddr;
+ Ep->EpAddr = (UINT8) (EpAddr & 0x0F);
+ Ep->Direction = (((EpAddr & 0x80) != 0) ? EfiUsbDataIn : EfiUsbDataOut);
+ Ep->DevSpeed = DevSpeed;
+ Ep->MaxPacket = MaxPacket;
+
+ Ep->HubAddr = 0;
+ Ep->HubPort = 0;
+
+ if (DevSpeed != EFI_USB_SPEED_HIGH) {
+ ASSERT (Hub != NULL);
+
+ Ep->HubAddr = Hub->TranslatorHubAddress;
+ Ep->HubPort = Hub->TranslatorPortNumber;
+ }
+
+ Ep->Toggle = Toggle;
+ Ep->Type = Type;
+ Ep->PollRate = EhcConvertPollRate (Interval);
+
+ Urb->Request = Request;
+ Urb->Data = Data;
+ Urb->DataLen = DataLen;
+ Urb->Callback = Callback;
+ Urb->Context = Context;
+ Urb->Qh = EhcCreateQh (Ehc, &Urb->Ep);
+
+ if (Urb->Qh == NULL) {
+ goto ON_ERROR;
+ }
+
+ //
+ // Map the request and user data
+ //
+ if (Request != NULL) {
+ Len = sizeof (EFI_USB_DEVICE_REQUEST);
+ PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Request ;
+ if ( (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
+ goto ON_ERROR;
+ }
+
+ Urb->RequestPhy = (VOID *) ((UINTN) PhyAddr);
+ Urb->RequestMap = Map;
+ }
+
+ if (Data != NULL) {
+ Len = DataLen;
+ PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Data ;
+ if ( (Len != DataLen)) {
+ goto ON_ERROR;
+ }
+
+ Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
+ Urb->DataMap = Map;
+ }
+
+ Status = EhcCreateQtds (Ehc, Urb);
+
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ return Urb;
+
+ON_ERROR:
+ EhcFreeUrb (Ehc, Urb);
+ return NULL;
+}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h new file mode 100644 index 0000000000..3fe93fb294 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h @@ -0,0 +1,331 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EFI_EHCI_URB_H_
+#define _EFI_EHCI_URB_H_
+
+typedef struct _PEI_EHC_QTD PEI_EHC_QTD;
+typedef struct _PEI_EHC_QH PEI_EHC_QH;
+typedef struct _PEI_URB PEI_URB;
+
+#define EHC_CTRL_TRANSFER 0x01
+#define EHC_BULK_TRANSFER 0x02
+#define EHC_INT_TRANSFER_SYNC 0x04
+#define EHC_INT_TRANSFER_ASYNC 0x08
+
+#define EHC_QTD_SIG SIGNATURE_32 ('U', 'S', 'B', 'T')
+#define EHC_QH_SIG SIGNATURE_32 ('U', 'S', 'B', 'H')
+#define EHC_URB_SIG SIGNATURE_32 ('U', 'S', 'B', 'R')
+
+//
+// Hardware related bit definitions
+//
+#define EHC_TYPE_ITD 0x00
+#define EHC_TYPE_QH 0x02
+#define EHC_TYPE_SITD 0x04
+#define EHC_TYPE_FSTN 0x06
+
+#define QH_NAK_RELOAD 3
+#define QH_HSHBW_MULTI 1
+
+#define QTD_MAX_ERR 3
+#define QTD_PID_OUTPUT 0x00
+#define QTD_PID_INPUT 0x01
+#define QTD_PID_SETUP 0x02
+
+#define QTD_STAT_DO_OUT 0
+#define QTD_STAT_DO_SS 0
+#define QTD_STAT_DO_PING 0x01
+#define QTD_STAT_DO_CS 0x02
+#define QTD_STAT_TRANS_ERR 0x08
+#define QTD_STAT_BABBLE_ERR 0x10
+#define QTD_STAT_BUFF_ERR 0x20
+#define QTD_STAT_HALTED 0x40
+#define QTD_STAT_ACTIVE 0x80
+#define QTD_STAT_ERR_MASK (QTD_STAT_TRANS_ERR | QTD_STAT_BABBLE_ERR | QTD_STAT_BUFF_ERR)
+
+#define QTD_MAX_BUFFER 4
+#define QTD_BUF_LEN 4096
+#define QTD_BUF_MASK 0x0FFF
+
+#define QH_MICROFRAME_0 0x01
+#define QH_MICROFRAME_1 0x02
+#define QH_MICROFRAME_2 0x04
+#define QH_MICROFRAME_3 0x08
+#define QH_MICROFRAME_4 0x10
+#define QH_MICROFRAME_5 0x20
+#define QH_MICROFRAME_6 0x40
+#define QH_MICROFRAME_7 0x80
+
+#define USB_ERR_SHORT_PACKET 0x200
+
+//
+// Fill in the hardware link point: pass in a EHC_QH/QH_HW
+// pointer to QH_LINK; A EHC_QTD/QTD_HW pointer to QTD_LINK
+//
+#define QH_LINK(Addr, Type, Term) \
+ ((UINT32) ((EHC_LOW_32BIT (Addr) & 0xFFFFFFE0) | (Type) | ((Term) ? 1 : 0)))
+
+#define QTD_LINK(Addr, Term) QH_LINK((Addr), 0, (Term))
+
+//
+// The defination of EHCI hardware used data structure for
+// little endian architecture. The QTD and QH structures
+// are required to be 32 bytes aligned. Don't add members
+// to the head of the associated software strucuture.
+//
+#pragma pack(1)
+typedef struct {
+ UINT32 NextQtd;
+ UINT32 AltNext;
+
+ UINT32 Status : 8;
+ UINT32 Pid : 2;
+ UINT32 ErrCnt : 2;
+ UINT32 CurPage : 3;
+ UINT32 Ioc : 1;
+ UINT32 TotalBytes : 15;
+ UINT32 DataToggle : 1;
+
+ UINT32 Page[5];
+ UINT32 PageHigh[5];
+} QTD_HW;
+
+typedef struct {
+ UINT32 HorizonLink;
+ //
+ // Endpoint capabilities/Characteristics DWord 1 and DWord 2
+ //
+ UINT32 DeviceAddr : 7;
+ UINT32 Inactive : 1;
+ UINT32 EpNum : 4;
+ UINT32 EpSpeed : 2;
+ UINT32 DtCtrl : 1;
+ UINT32 ReclaimHead : 1;
+ UINT32 MaxPacketLen : 11;
+ UINT32 CtrlEp : 1;
+ UINT32 NakReload : 4;
+
+ UINT32 SMask : 8;
+ UINT32 CMask : 8;
+ UINT32 HubAddr : 7;
+ UINT32 PortNum : 7;
+ UINT32 Multiplier : 2;
+
+ //
+ // Transaction execution overlay area
+ //
+ UINT32 CurQtd;
+ UINT32 NextQtd;
+ UINT32 AltQtd;
+
+ UINT32 Status : 8;
+ UINT32 Pid : 2;
+ UINT32 ErrCnt : 2;
+ UINT32 CurPage : 3;
+ UINT32 Ioc : 1;
+ UINT32 TotalBytes : 15;
+ UINT32 DataToggle : 1;
+
+ UINT32 Page[5];
+ UINT32 PageHigh[5];
+} QH_HW;
+#pragma pack()
+
+
+//
+// Endpoint address and its capabilities
+//
+typedef struct _USB_ENDPOINT {
+ UINT8 DevAddr;
+ UINT8 EpAddr; // Endpoint address, no direction encoded in
+ EFI_USB_DATA_DIRECTION Direction;
+ UINT8 DevSpeed;
+ UINTN MaxPacket;
+ UINT8 HubAddr;
+ UINT8 HubPort;
+ UINT8 Toggle; // Data toggle, not used for control transfer
+ UINTN Type;
+ UINTN PollRate; // Polling interval used by EHCI
+} USB_ENDPOINT;
+
+//
+// Software QTD strcture, this is used to manage all the
+// QTD generated from a URB. Don't add fields before QtdHw.
+//
+struct _PEI_EHC_QTD {
+ QTD_HW QtdHw;
+ UINT32 Signature;
+ EFI_LIST_ENTRY QtdList; // The list of QTDs to one end point
+ UINT8 *Data; // Buffer of the original data
+ UINTN DataLen; // Original amount of data in this QTD
+};
+
+
+
+//
+// Software QH structure. All three different transaction types
+// supported by UEFI USB, that is the control/bulk/interrupt
+// transfers use the queue head and queue token strcuture.
+//
+// Interrupt QHs are linked to periodic frame list in the reversed
+// 2^N tree. Each interrupt QH is linked to the list starting at
+// frame 0. There is a dummy interrupt QH linked to each frame as
+// a sentinental whose polling interval is 1. Synchronous interrupt
+// transfer is linked after this dummy QH.
+//
+// For control/bulk transfer, only synchronous (in the sense of UEFI)
+// transfer is supported. A dummy QH is linked to EHCI AsyncListAddr
+// as the reclamation header. New transfer is inserted after this QH.
+//
+struct _PEI_EHC_QH {
+ QH_HW QhHw;
+ UINT32 Signature;
+ PEI_EHC_QH *NextQh; // The queue head pointed to by horizontal link
+ EFI_LIST_ENTRY Qtds; // The list of QTDs to this queue head
+ UINTN Interval;
+};
+
+//
+// URB (Usb Request Block) contains information for all kinds of
+// usb requests.
+//
+struct _PEI_URB {
+ UINT32 Signature;
+ EFI_LIST_ENTRY UrbList;
+
+ //
+ // Transaction information
+ //
+ USB_ENDPOINT Ep;
+ EFI_USB_DEVICE_REQUEST *Request; // Control transfer only
+ VOID *RequestPhy; // Address of the mapped request
+ VOID *RequestMap;
+ VOID *Data;
+ UINTN DataLen;
+ VOID *DataPhy; // Address of the mapped user data
+ VOID *DataMap;
+ EFI_ASYNC_USB_TRANSFER_CALLBACK Callback;
+ VOID *Context;
+
+ //
+ // Schedule data
+ //
+ PEI_EHC_QH *Qh;
+
+ //
+ // Transaction result
+ //
+ UINT32 Result;
+ UINTN Completed; // completed data length
+ UINT8 DataToggle;
+};
+
+/**
+ Delete a single asynchronous interrupt transfer for
+ the device and endpoint.
+
+ @param Ehc The EHCI device.
+ @param Data Current data not associated with a QTD.
+ @param DataLen The length of the data.
+ @param PktId Packet ID to use in the QTD.
+ @param Toggle Data toggle to use in the QTD.
+ @param MaxPacket Maximu packet length of the endpoint.
+
+ @retval the pointer to the created QTD or NULL if failed to create one.
+
+**/
+PEI_EHC_QTD *
+EhcCreateQtd (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT8 *Data,
+ IN UINTN DataLen,
+ IN UINT8 PktId,
+ IN UINT8 Toggle,
+ IN UINTN MaxPacket
+ )
+;
+
+/**
+ Allocate and initialize a EHCI queue head.
+
+ @param Ehci The EHCI device.
+ @param Ep The endpoint to create queue head for.
+
+ @retval the pointer to the created queue head or NULL if failed to create one.
+
+**/
+PEI_EHC_QH *
+EhcCreateQh (
+ IN PEI_USB2_HC_DEV *Ehci,
+ IN USB_ENDPOINT *Ep
+ )
+;
+
+/**
+ Free an allocated URB. It is possible for it to be partially inited.
+
+ @param Ehc The EHCI device.
+ @param Urb The URB to free.
+
+**/
+VOID
+EhcFreeUrb (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN PEI_URB *Urb
+ )
+;
+
+/**
+ Create a new URB and its associated QTD.
+
+ @param Ehc The EHCI device.
+ @param DevAddr The device address.
+ @param EpAddr Endpoint addrress & its direction.
+ @param DevSpeed The device speed.
+ @param Toggle Initial data toggle to use.
+ @param MaxPacket The max packet length of the endpoint.
+ @param Hub The transaction translator to use.
+ @param Type The transaction type.
+ @param Request The standard USB request for control transfer.
+ @param Data The user data to transfer.
+ @param DataLen The length of data buffer.
+ @param Callback The function to call when data is transferred.
+ @param Context The context to the callback.
+ @param Interval The interval for interrupt transfer.
+
+ @retval the pointer to the created URB or NULL.
+
+**/
+PEI_URB *
+EhcCreateUrb (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN UINT8 DevAddr,
+ IN UINT8 EpAddr,
+ IN UINT8 DevSpeed,
+ IN UINT8 Toggle,
+ IN UINTN MaxPacket,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Hub,
+ IN UINTN Type,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN VOID *Data,
+ IN UINTN DataLen,
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK Callback,
+ IN VOID *Context,
+ IN UINTN Interval
+ )
+;
+#endif
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c new file mode 100644 index 0000000000..6b3755852b --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c @@ -0,0 +1,493 @@ +/** @file
+PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+which is used to enable recovery function from USB Drivers.
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "EhcPeim.h"
+
+/**
+ Allocate a block of memory to be used by the buffer pool.
+
+ @param Ehc The EHCI device.
+ @param Pool The buffer pool to allocate memory for.
+ @param Pages How many pages to allocate.
+
+ @return The allocated memory block or NULL if failed.
+
+**/
+USBHC_MEM_BLOCK *
+UsbHcAllocMemBlock (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN USBHC_MEM_POOL *Pool,
+ IN UINTN Pages
+ )
+{
+ USBHC_MEM_BLOCK *Block;
+ VOID *BufHost;
+ VOID *Mapping;
+ EFI_PHYSICAL_ADDRESS MappedAddr;
+ EFI_STATUS Status;
+ UINTN PageNumber;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+
+ Mapping = NULL;
+ PageNumber = sizeof(USBHC_MEM_BLOCK)/PAGESIZE +1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ PageNumber,
+ &TempPtr
+ );
+
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
+
+ //
+ // each bit in the bit array represents USBHC_MEM_UNIT
+ // bytes of memory in the memory block.
+ //
+ ASSERT (USBHC_MEM_UNIT * 8 <= EFI_PAGE_SIZE);
+
+ Block = (USBHC_MEM_BLOCK*)(UINTN)TempPtr;
+ Block->BufLen = EFI_PAGES_TO_SIZE (Pages);
+ Block->BitsLen = Block->BufLen / (USBHC_MEM_UNIT * 8);
+
+ PageNumber = (Block->BitsLen)/PAGESIZE +1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ PageNumber,
+ &TempPtr
+ );
+
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
+
+ Block->Bits = (UINT8 *)(UINTN)TempPtr;
+
+
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ Pages,
+ &TempPtr
+ );
+ ZeroMem ((VOID *)(UINTN)TempPtr, Pages*EFI_PAGE_SIZE);
+
+ BufHost = (VOID *)(UINTN)TempPtr;
+ MappedAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) BufHost;
+ //
+ // Check whether the data structure used by the host controller
+ // should be restricted into the same 4G
+ //
+ if (Pool->Check4G && (Pool->Which4G != USB_HC_HIGH_32BIT (MappedAddr))) {
+ return NULL;
+ }
+
+ Block->BufHost = BufHost;
+ Block->Buf = (UINT8 *) ((UINTN) MappedAddr);
+ Block->Mapping = Mapping;
+ Block->Next = NULL;
+
+ return Block;
+
+}
+
+/**
+ Free the memory block from the memory pool.
+
+ @param Pool The memory pool to free the block from.
+ @param Block The memory block to free.
+
+**/
+VOID
+UsbHcFreeMemBlock (
+ IN USBHC_MEM_POOL *Pool,
+ IN USBHC_MEM_BLOCK *Block
+ )
+{
+ ASSERT ((Pool != NULL) && (Block != NULL));
+}
+
+/**
+ Alloc some memory from the block.
+
+ @param Block The memory block to allocate memory from.
+ @param Units Number of memory units to allocate.
+
+ @return The pointer to the allocated memory. If couldn't allocate the needed memory,
+ the return value is NULL.
+
+**/
+VOID *
+UsbHcAllocMemFromBlock (
+ IN USBHC_MEM_BLOCK *Block,
+ IN UINTN Units
+ )
+{
+ UINTN Byte;
+ UINT8 Bit;
+ UINTN StartByte;
+ UINT8 StartBit;
+ UINTN Available;
+ UINTN Count;
+
+ ASSERT ((Block != 0) && (Units != 0));
+
+ StartByte = 0;
+ StartBit = 0;
+ Available = 0;
+
+ for (Byte = 0, Bit = 0; Byte < Block->BitsLen;) {
+ //
+ // If current bit is zero, the corresponding memory unit is
+ // available, otherwise we need to restart our searching.
+ // Available counts the consective number of zero bit.
+ //
+ if (!USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit)) {
+ Available++;
+
+ if (Available >= Units) {
+ break;
+ }
+
+ NEXT_BIT (Byte, Bit);
+
+ } else {
+ NEXT_BIT (Byte, Bit);
+
+ Available = 0;
+ StartByte = Byte;
+ StartBit = Bit;
+ }
+ }
+
+ if (Available < Units) {
+ return NULL;
+ }
+
+ //
+ // Mark the memory as allocated
+ //
+ Byte = StartByte;
+ Bit = StartBit;
+
+ for (Count = 0; Count < Units; Count++) {
+ ASSERT (!USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));
+
+ Block->Bits[Byte] = (UINT8) (Block->Bits[Byte] | (UINT8) USB_HC_BIT (Bit));
+ NEXT_BIT (Byte, Bit);
+ }
+
+ return Block->Buf + (StartByte * 8 + StartBit) * USBHC_MEM_UNIT;
+}
+
+/**
+ Insert the memory block to the pool's list of the blocks.
+
+ @param Head The head of the memory pool's block list.
+ @param Block The memory block to insert.
+
+**/
+VOID
+UsbHcInsertMemBlockToPool (
+ IN USBHC_MEM_BLOCK *Head,
+ IN USBHC_MEM_BLOCK *Block
+ )
+{
+ ASSERT ((Head != NULL) && (Block != NULL));
+ Block->Next = Head->Next;
+ Head->Next = Block;
+}
+
+/**
+ Is the memory block empty?
+
+ @param Block The memory block to check.
+
+ @retval TRUE The memory block is empty.
+ @retval FALSE The memory block isn't empty.
+
+**/
+BOOLEAN
+UsbHcIsMemBlockEmpty (
+ IN USBHC_MEM_BLOCK *Block
+ )
+{
+ UINTN Index;
+
+
+ for (Index = 0; Index < Block->BitsLen; Index++) {
+ if (Block->Bits[Index] != 0) {
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
+
+/**
+ Unlink the memory block from the pool's list.
+
+ @param Head The block list head of the memory's pool.
+ @param BlockToUnlink The memory block to unlink.
+
+**/
+VOID
+UsbHcUnlinkMemBlock (
+ IN USBHC_MEM_BLOCK *Head,
+ IN USBHC_MEM_BLOCK *BlockToUnlink
+ )
+{
+ USBHC_MEM_BLOCK *Block;
+
+ ASSERT ((Head != NULL) && (BlockToUnlink != NULL));
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ if (Block->Next == BlockToUnlink) {
+ Block->Next = BlockToUnlink->Next;
+ BlockToUnlink->Next = NULL;
+ break;
+ }
+ }
+}
+
+/**
+ Initialize the memory management pool for the host controller.
+
+ @param Ehc The EHCI device.
+ @param Check4G Whether the host controller requires allocated memory.
+ from one 4G address space.
+ @param Which4G The 4G memory area each memory allocated should be from.
+
+ @retval EFI_SUCCESS The memory pool is initialized.
+ @retval EFI_OUT_OF_RESOURCE Fail to init the memory pool.
+
+**/
+USBHC_MEM_POOL *
+UsbHcInitMemPool (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN BOOLEAN Check4G,
+ IN UINT32 Which4G
+ )
+{
+ USBHC_MEM_POOL *Pool;
+ UINTN PageNumber;
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+
+ PageNumber = sizeof(USBHC_MEM_POOL)/PAGESIZE +1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ PageNumber,
+ &TempPtr
+ );
+
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
+
+ Pool = (USBHC_MEM_POOL *) ((UINTN) TempPtr);
+
+ Pool->Check4G = Check4G;
+ Pool->Which4G = Which4G;
+ Pool->Head = UsbHcAllocMemBlock (Ehc, Pool, USBHC_MEM_DEFAULT_PAGES);
+
+ if (Pool->Head == NULL) {
+ Pool = NULL;
+ }
+
+ return Pool;
+}
+
+/**
+ Release the memory management pool.
+
+ @param Pool The USB memory pool to free.
+
+ @retval EFI_DEVICE_ERROR Fail to free the memory pool.
+ @retval EFI_SUCCESS The memory pool is freed.
+
+**/
+EFI_STATUS
+UsbHcFreeMemPool (
+ IN USBHC_MEM_POOL *Pool
+ )
+{
+ USBHC_MEM_BLOCK *Block;
+
+ ASSERT (Pool->Head != NULL);
+
+ //
+ // Unlink all the memory blocks from the pool, then free them.
+ // UsbHcUnlinkMemBlock can't be used to unlink and free the
+ // first block.
+ //
+ for (Block = Pool->Head->Next; Block != NULL; Block = Pool->Head->Next) {
+ UsbHcFreeMemBlock (Pool, Block);
+ }
+
+ UsbHcFreeMemBlock (Pool, Pool->Head);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Allocate some memory from the host controller's memory pool
+ which can be used to communicate with host controller.
+
+ @param Ehc The EHCI device.
+ @param Pool The host controller's memory pool.
+ @param Size Size of the memory to allocate.
+
+ @return The allocated memory or NULL.
+
+**/
+VOID *
+UsbHcAllocateMem (
+ IN PEI_USB2_HC_DEV *Ehc,
+ IN USBHC_MEM_POOL *Pool,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ USBHC_MEM_BLOCK *NewBlock;
+ VOID *Mem;
+ UINTN AllocSize;
+ UINTN Pages;
+
+ Mem = NULL;
+ AllocSize = USBHC_MEM_ROUND (Size);
+ Head = Pool->Head;
+ ASSERT (Head != NULL);
+
+ //
+ // First check whether current memory blocks can satisfy the allocation.
+ //
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ Mem = UsbHcAllocMemFromBlock (Block, AllocSize / USBHC_MEM_UNIT);
+
+ if (Mem != NULL) {
+ ZeroMem (Mem, Size);
+ break;
+ }
+ }
+
+ if (Mem != NULL) {
+ return Mem;
+ }
+
+ //
+ // Create a new memory block if there is not enough memory
+ // in the pool. If the allocation size is larger than the
+ // default page number, just allocate a large enough memory
+ // block. Otherwise allocate default pages.
+ //
+ if (AllocSize > EFI_PAGES_TO_SIZE (USBHC_MEM_DEFAULT_PAGES)) {
+ Pages = EFI_SIZE_TO_PAGES (AllocSize) + 1;
+ } else {
+ Pages = USBHC_MEM_DEFAULT_PAGES;
+ }
+ NewBlock = UsbHcAllocMemBlock (Ehc,Pool, Pages);
+
+ if (NewBlock == NULL) {
+ return NULL;
+ }
+
+ //
+ // Add the new memory block to the pool, then allocate memory from it
+ //
+ UsbHcInsertMemBlockToPool (Head, NewBlock);
+ Mem = UsbHcAllocMemFromBlock (NewBlock, AllocSize / USBHC_MEM_UNIT);
+
+ if (Mem != NULL) {
+ ZeroMem (Mem, Size);
+ }
+
+ return Mem;
+}
+
+/**
+ Free the allocated memory back to the memory pool.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The memory to free.
+ @param Size The size of the memory to free.
+
+**/
+VOID
+UsbHcFreeMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ UINT8 *ToFree;
+ UINTN AllocSize;
+ UINTN Byte;
+ UINTN Bit;
+ UINTN Count;
+
+ Head = Pool->Head;
+ AllocSize = USBHC_MEM_ROUND (Size);
+ ToFree = (UINT8 *) Mem;
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ //
+ // scan the memory block list for the memory block that
+ // completely contains the memory to free.
+ //
+ if ((Block->Buf <= ToFree) && ((ToFree + AllocSize) <= (Block->Buf + Block->BufLen))) {
+ //
+ // compute the start byte and bit in the bit array
+ //
+ Byte = ((ToFree - Block->Buf) / USBHC_MEM_UNIT) / 8;
+ Bit = ((ToFree - Block->Buf) / USBHC_MEM_UNIT) % 8;
+
+ //
+ // reset associated bits in bit arry
+ //
+ for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {
+ ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));
+
+ Block->Bits[Byte] = (UINT8) (Block->Bits[Byte] ^ USB_HC_BIT (Bit));
+ NEXT_BIT (Byte, Bit);
+ }
+
+ break;
+ }
+ }
+
+ //
+ // If Block == NULL, it means that the current memory isn't
+ // in the host controller's pool. This is critical because
+ // the caller has passed in a wrong memory point
+ //
+ ASSERT (Block != NULL);
+
+ //
+ // Release the current memory block if it is empty and not the head
+ //
+ if ((Block != Head) && UsbHcIsMemBlockEmpty (Block)) {
+ UsbHcFreeMemBlock (Pool, Block);
+ }
+
+ return ;
+}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h new file mode 100644 index 0000000000..586d12af96 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h @@ -0,0 +1,77 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EFI_EHCI_MEM_H_
+#define _EFI_EHCI_MEM_H_
+
+#include <Uefi.h>
+#include <IndustryStandard/Pci22.h>
+
+#define USB_HC_BIT(a) ((UINTN)(1 << (a)))
+
+#define USB_HC_BIT_IS_SET(Data, Bit) \
+ ((BOOLEAN)(((Data) & USB_HC_BIT(Bit)) == USB_HC_BIT(Bit)))
+
+#define USB_HC_HIGH_32BIT(Addr64) \
+ ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF))
+
+typedef struct _USBHC_MEM_BLOCK USBHC_MEM_BLOCK;
+
+struct _USBHC_MEM_BLOCK {
+ UINT8 *Bits; // Bit array to record which unit is allocated
+ UINTN BitsLen;
+ UINT8 *Buf;
+ UINT8 *BufHost;
+ UINTN BufLen; // Memory size in bytes
+ VOID *Mapping;
+ USBHC_MEM_BLOCK *Next;
+};
+
+//
+// USBHC_MEM_POOL is used to manage the memory used by USB
+// host controller. EHCI requires the control memory and transfer
+// data to be on the same 4G memory.
+//
+typedef struct _USBHC_MEM_POOL {
+ BOOLEAN Check4G;
+ UINT32 Which4G;
+ USBHC_MEM_BLOCK *Head;
+} USBHC_MEM_POOL;
+
+//
+// Memory allocation unit, must be 2^n, n>4
+//
+#define USBHC_MEM_UNIT 64
+
+#define USBHC_MEM_UNIT_MASK (USBHC_MEM_UNIT - 1)
+#define USBHC_MEM_DEFAULT_PAGES 16
+
+#define USBHC_MEM_ROUND(Len) (((Len) + USBHC_MEM_UNIT_MASK) & (~USBHC_MEM_UNIT_MASK))
+
+//
+// Advance the byte and bit to the next bit, adjust byte accordingly.
+//
+#define NEXT_BIT(Byte, Bit) \
+ do { \
+ (Bit)++; \
+ if ((Bit) > 7) { \
+ (Byte)++; \
+ (Bit) = 0; \
+ } \
+ } while (0)
+
+
+#endif
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c new file mode 100644 index 0000000000..f58b6943f2 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c @@ -0,0 +1,3196 @@ +/** @file
+PEIM to produce gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+which is used to enable recovery function from USB Drivers.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UhcPeim.h"
+
+/**
+ Initializes Usb Host Controller.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCCESS PPI successfully installed.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcPeimEntry (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ PEI_USB_CONTROLLER_PPI *ChipSetUsbControllerPpi;
+ EFI_STATUS Status;
+ UINT8 Index;
+ UINTN ControllerType;
+ UINTN BaseAddress;
+ UINTN MemPages;
+ USB_UHC_DEV *UhcDev;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+
+ //
+ // Shadow this PEIM to run from memory
+ //
+ if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
+ return EFI_SUCCESS;
+ }
+
+ Status = PeiServicesLocatePpi (
+ &gPeiUsbControllerPpiGuid,
+ 0,
+ NULL,
+ (VOID **) &ChipSetUsbControllerPpi
+ );
+ //
+ // If failed to locate, it is a bug in dispather as depex has gPeiUsbControllerPpiGuid.
+ //
+ ASSERT_EFI_ERROR (Status);
+
+ Index = 0;
+ while (TRUE) {
+ Status = ChipSetUsbControllerPpi->GetUsbController (
+ (EFI_PEI_SERVICES **) PeiServices,
+ ChipSetUsbControllerPpi,
+ Index,
+ &ControllerType,
+ &BaseAddress
+ );
+ //
+ // When status is error, meant no controller is found
+ //
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ //
+ // This PEIM is for UHC type controller.
+ //
+ if (ControllerType != PEI_UHCI_CONTROLLER) {
+ Index++;
+ continue;
+ }
+
+ MemPages = sizeof (USB_UHC_DEV) / EFI_PAGE_SIZE + 1;
+
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ MemPages,
+ &TempPtr
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ UhcDev = (USB_UHC_DEV *) ((UINTN) TempPtr);
+ UhcDev->Signature = USB_UHC_DEV_SIGNATURE;
+ UhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
+
+ //
+ // Init local memory management service
+ //
+ Status = InitializeMemoryManagement (UhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Initialize Uhc's hardware
+ //
+ Status = InitializeUsbHC (UhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ UhcDev->UsbHostControllerPpi.ControlTransfer = UhcControlTransfer;
+ UhcDev->UsbHostControllerPpi.BulkTransfer = UhcBulkTransfer;
+ UhcDev->UsbHostControllerPpi.GetRootHubPortNumber = UhcGetRootHubPortNumber;
+ UhcDev->UsbHostControllerPpi.GetRootHubPortStatus = UhcGetRootHubPortStatus;
+ UhcDev->UsbHostControllerPpi.SetRootHubPortFeature = UhcSetRootHubPortFeature;
+ UhcDev->UsbHostControllerPpi.ClearRootHubPortFeature = UhcClearRootHubPortFeature;
+
+ UhcDev->PpiDescriptor.Flags = (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
+ UhcDev->PpiDescriptor.Guid = &gPeiUsbHostControllerPpiGuid;
+ UhcDev->PpiDescriptor.Ppi = &UhcDev->UsbHostControllerPpi;
+
+ Status = PeiServicesInstallPpi (&UhcDev->PpiDescriptor);
+ if (EFI_ERROR (Status)) {
+ Index++;
+ continue;
+ }
+
+ Index++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress The target device address.
+ @param DeviceSpeed Target device speed.
+ @param MaximumPacketLength Maximum packet size the default control transfer
+ endpoint is capable of sending or receiving.
+ @param Request USB device request to send.
+ @param TransferDirection Specifies the data direction for the data stage.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+ @param TimeOut Indicates the maximum timeout, in millisecond.
+ @param TransferResult Return the result of this control transfer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data OPTIONAL,
+ IN OUT UINTN *DataLength OPTIONAL,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 StatusReg;
+ UINT8 PktID;
+ QH_STRUCT *PtrQH;
+ TD_STRUCT *PtrTD;
+ TD_STRUCT *PtrPreTD;
+ TD_STRUCT *PtrSetupTD;
+ TD_STRUCT *PtrStatusTD;
+ EFI_STATUS Status;
+ UINT32 DataLen;
+ UINT8 *PtrDataSource;
+ UINT8 *Ptr;
+ UINT8 DataToggle;
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+
+ StatusReg = UhcDev->UsbHostControllerBaseAddress + USBSTS;
+
+ PktID = INPUT_PACKET_ID;
+
+ if (Request == NULL || TransferResult == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // if errors exist that cause host controller halt,
+ // then return EFI_DEVICE_ERROR.
+ //
+
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ //
+ // generate Setup Stage TD
+ //
+
+ PtrQH = UhcDev->ConfigQH;
+
+ GenSetupStageTD (
+ UhcDev,
+ DeviceAddress,
+ 0,
+ DeviceSpeed,
+ (UINT8 *) Request,
+ (UINT8) sizeof (EFI_USB_DEVICE_REQUEST),
+ &PtrSetupTD
+ );
+
+ //
+ // link setup TD structures to QH structure
+ //
+ LinkTDToQH (PtrQH, PtrSetupTD);
+
+ PtrPreTD = PtrSetupTD;
+
+ //
+ // Data Stage of Control Transfer
+ //
+ switch (TransferDirection) {
+
+ case EfiUsbDataIn:
+ PktID = INPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ case EfiUsbDataOut:
+ PktID = OUTPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ //
+ // no data stage
+ //
+ case EfiUsbNoData:
+ if (*DataLength != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ PktID = OUTPUT_PACKET_ID;
+ PtrDataSource = NULL;
+ DataLen = 0;
+ Ptr = NULL;
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DataToggle = 1;
+
+ PtrTD = PtrSetupTD;
+ while (DataLen > 0) {
+ //
+ // create TD structures and link together
+ //
+ UINT8 PacketSize;
+
+ //
+ // PacketSize is the data load size of each TD carries.
+ //
+ PacketSize = (UINT8) DataLen;
+ if (DataLen > MaximumPacketLength) {
+ PacketSize = MaximumPacketLength;
+ }
+
+ GenDataTD (
+ UhcDev,
+ DeviceAddress,
+ 0,
+ Ptr,
+ PacketSize,
+ PktID,
+ DataToggle,
+ DeviceSpeed,
+ &PtrTD
+ );
+
+ //
+ // Link two TDs in vertical depth
+ //
+ LinkTDToTD (PtrPreTD, PtrTD);
+ PtrPreTD = PtrTD;
+
+ DataToggle ^= 1;
+ Ptr += PacketSize;
+ DataLen -= PacketSize;
+ }
+
+ //
+ // PtrPreTD points to the last TD before the Setup-Stage TD.
+ //
+ PtrPreTD = PtrTD;
+
+ //
+ // Status Stage of Control Transfer
+ //
+ if (PktID == OUTPUT_PACKET_ID) {
+ PktID = INPUT_PACKET_ID;
+ } else {
+ PktID = OUTPUT_PACKET_ID;
+ }
+ //
+ // create Status Stage TD structure
+ //
+ CreateStatusTD (
+ UhcDev,
+ DeviceAddress,
+ 0,
+ PktID,
+ DeviceSpeed,
+ &PtrStatusTD
+ );
+
+ LinkTDToTD (PtrPreTD, PtrStatusTD);
+
+ //
+ // Poll QH-TDs execution and get result.
+ // detail status is returned
+ //
+ Status = ExecuteControlTransfer (
+ UhcDev,
+ PtrSetupTD,
+ DataLength,
+ TimeOut,
+ TransferResult
+ );
+
+ //
+ // TRUE means must search other framelistindex
+ //
+ SetQHVerticalValidorInvalid(PtrQH, FALSE);
+ DeleteQueuedTDs (UhcDev, PtrSetupTD);
+
+ //
+ // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
+ //
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult |= EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ return Status;
+}
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction in bit 7.
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ sending or receiving.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param DataToggle On input, the initial data toggle for the transfer;
+ On output, it is updated to to next data toggle to use of
+ the subsequent bulk transfer.
+ @param TimeOut Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+ @param TransferResult A pointer to the detailed result information of the
+ bulk transfer.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 StatusReg;
+
+ UINT32 DataLen;
+
+ QH_STRUCT *PtrQH;
+ TD_STRUCT *PtrFirstTD;
+ TD_STRUCT *PtrTD;
+ TD_STRUCT *PtrPreTD;
+
+ UINT8 PktID;
+ UINT8 *PtrDataSource;
+ UINT8 *Ptr;
+
+ BOOLEAN IsFirstTD;
+
+ EFI_STATUS Status;
+
+ EFI_USB_DATA_DIRECTION TransferDirection;
+
+ BOOLEAN ShortPacketEnable;
+
+ UINT16 CommandContent;
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+
+ //
+ // Enable the maximum packet size (64bytes)
+ // that can be used for full speed bandwidth reclamation
+ // at the end of a frame.
+ //
+ CommandContent = USBReadPortW (UhcDev, UhcDev->UsbHostControllerBaseAddress + USBCMD);
+ if ((CommandContent & USBCMD_MAXP) != USBCMD_MAXP) {
+ CommandContent |= USBCMD_MAXP;
+ USBWritePortW (UhcDev, UhcDev->UsbHostControllerBaseAddress + USBCMD, CommandContent);
+ }
+
+ StatusReg = UhcDev->UsbHostControllerBaseAddress + USBSTS;
+
+ //
+ // these code lines are added here per complier's strict demand
+ //
+ PktID = INPUT_PACKET_ID;
+ PtrTD = NULL;
+ PtrFirstTD = NULL;
+ PtrPreTD = NULL;
+ DataLen = 0;
+ Ptr = NULL;
+
+ ShortPacketEnable = FALSE;
+
+ if ((DataLength == 0) || (Data == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 1) && (*DataToggle != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (MaximumPacketLength != 8 && MaximumPacketLength != 16
+ && MaximumPacketLength != 32 && MaximumPacketLength != 64) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
+ //
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ if ((EndPointAddress & 0x80) != 0) {
+ TransferDirection = EfiUsbDataIn;
+ } else {
+ TransferDirection = EfiUsbDataOut;
+ }
+
+ switch (TransferDirection) {
+
+ case EfiUsbDataIn:
+ ShortPacketEnable = TRUE;
+ PktID = INPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ case EfiUsbDataOut:
+ PktID = OUTPUT_PACKET_ID;
+ PtrDataSource = Data;
+ DataLen = (UINT32) *DataLength;
+ Ptr = PtrDataSource;
+ break;
+
+ default:
+ break;
+ }
+
+ PtrQH = UhcDev->BulkQH;
+
+ IsFirstTD = TRUE;
+ while (DataLen > 0) {
+ //
+ // create TD structures and link together
+ //
+ UINT8 PacketSize;
+
+ PacketSize = (UINT8) DataLen;
+ if (DataLen > MaximumPacketLength) {
+ PacketSize = MaximumPacketLength;
+ }
+
+ GenDataTD (
+ UhcDev,
+ DeviceAddress,
+ EndPointAddress,
+ Ptr,
+ PacketSize,
+ PktID,
+ *DataToggle,
+ USB_FULL_SPEED_DEVICE,
+ &PtrTD
+ );
+
+ //
+ // Enable short packet detection.
+ // (default action is disabling short packet detection)
+ //
+ if (ShortPacketEnable) {
+ EnableorDisableTDShortPacket (PtrTD, TRUE);
+ }
+
+ if (IsFirstTD) {
+ PtrFirstTD = PtrTD;
+ PtrFirstTD->PtrNextTD = NULL;
+ IsFirstTD = FALSE;
+ } else {
+ //
+ // Link two TDs in vertical depth
+ //
+ LinkTDToTD (PtrPreTD, PtrTD);
+ }
+
+ PtrPreTD = PtrTD;
+
+ *DataToggle ^= 1;
+ Ptr += PacketSize;
+ DataLen -= PacketSize;
+ }
+ //
+ // link TD structures to QH structure
+ //
+ LinkTDToQH (PtrQH, PtrFirstTD);
+
+ //
+ // Execute QH-TD and get result
+ //
+ //
+ // detail status is put into the Result field in the pIRP
+ // the Data Toggle value is also re-updated to the value
+ // of the last successful TD
+ //
+ Status = ExecBulkTransfer (
+ UhcDev,
+ PtrFirstTD,
+ DataLength,
+ DataToggle,
+ TimeOut,
+ TransferResult
+ );
+
+ //
+ // Delete Bulk transfer TD structure
+ //
+ DeleteQueuedTDs (UhcDev, PtrFirstTD);
+
+ //
+ // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
+ //
+ if (!IsStatusOK (UhcDev, StatusReg)) {
+
+ ClearStatusReg (UhcDev, StatusReg);
+ *TransferResult |= EFI_USB_ERR_SYSTEM;
+ return EFI_DEVICE_ERROR;
+ }
+
+ ClearStatusReg (UhcDev, StatusReg);
+
+ return Status;
+}
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortNumber (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT16 RHPortControl;
+ UINT32 Index;
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+
+ if (PortNumber == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *PortNumber = 0;
+
+ for (Index = 0; Index < 2; Index++) {
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + Index * 2;
+ RHPortControl = USBReadPortW (UhcDev, PSAddr);
+ //
+ // Port Register content is valid
+ //
+ if (RHPortControl != 0xff) {
+ (*PortNumber)++;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber The root hub port to retrieve the state from.
+ @param PortStatus Variable to receive the port state.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified.
+ by PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT16 RHPortStatus;
+ UINT8 TotalPortNumber;
+
+ if (PortStatus == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcGetRootHubPortNumber (PeiServices, This, &TotalPortNumber);
+ if (PortNumber > TotalPortNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + PortNumber * 2;
+
+ PortStatus->PortStatus = 0;
+ PortStatus->PortChangeStatus = 0;
+
+ RHPortStatus = USBReadPortW (UhcDev, PSAddr);
+
+ //
+ // Current Connect Status
+ //
+ if ((RHPortStatus & USBPORTSC_CCS) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_CONNECTION;
+ }
+ //
+ // Port Enabled/Disabled
+ //
+ if ((RHPortStatus & USBPORTSC_PED) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_ENABLE;
+ }
+ //
+ // Port Suspend
+ //
+ if ((RHPortStatus & USBPORTSC_SUSP) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;
+ }
+ //
+ // Port Reset
+ //
+ if ((RHPortStatus & USBPORTSC_PR) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_RESET;
+ }
+ //
+ // Low Speed Device Attached
+ //
+ if ((RHPortStatus & USBPORTSC_LSDA) != 0) {
+ PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
+ }
+ //
+ // Fill Port Status Change bits
+ //
+ //
+ // Connect Status Change
+ //
+ if ((RHPortStatus & USBPORTSC_CSC) != 0) {
+ PortStatus->PortChangeStatus |= USB_PORT_STAT_C_CONNECTION;
+ }
+ //
+ // Port Enabled/Disabled Change
+ //
+ if ((RHPortStatus & USBPORTSC_PEDC) != 0) {
+ PortStatus->PortChangeStatus |= USB_PORT_STAT_C_ENABLE;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI
+ @param PortNumber Root hub port to set.
+ @param PortFeature Feature to set.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcSetRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT32 CommandRegAddr;
+ UINT16 RHPortControl;
+ UINT8 TotalPortNumber;
+
+ UhcGetRootHubPortNumber (PeiServices, This, &TotalPortNumber);
+ if (PortNumber > TotalPortNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + PortNumber * 2;
+ CommandRegAddr = UhcDev->UsbHostControllerBaseAddress + USBCMD;
+
+ RHPortControl = USBReadPortW (UhcDev, PSAddr);
+
+ switch (PortFeature) {
+
+ case EfiUsbPortSuspend:
+ if ((USBReadPortW (UhcDev, CommandRegAddr) & USBCMD_EGSM) == 0) {
+ //
+ // if global suspend is not active, can set port suspend
+ //
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_SUSP;
+ }
+ break;
+
+ case EfiUsbPortReset:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_PR;
+ //
+ // Set the reset bit
+ //
+ break;
+
+ case EfiUsbPortPower:
+ break;
+
+ case EfiUsbPortEnable:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_PED;
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ USBWritePortW (UhcDev, PSAddr, RHPortControl);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber Specifies the root hub port whose feature
+ is requested to be cleared.
+ @param PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcClearRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ USB_UHC_DEV *UhcDev;
+ UINT32 PSAddr;
+ UINT16 RHPortControl;
+ UINT8 TotalPortNumber;
+
+ UhcGetRootHubPortNumber (PeiServices, This, &TotalPortNumber);
+
+ if (PortNumber > TotalPortNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
+ PSAddr = UhcDev->UsbHostControllerBaseAddress + USBPORTSC1 + PortNumber * 2;
+
+ RHPortControl = USBReadPortW (UhcDev, PSAddr);
+
+ switch (PortFeature) {
+ //
+ // clear PORT_ENABLE feature means disable port.
+ //
+ case EfiUsbPortEnable:
+ RHPortControl &= 0xfff5;
+ RHPortControl &= ~USBPORTSC_PED;
+ break;
+
+ //
+ // clear PORT_SUSPEND feature means resume the port.
+ // (cause a resume on the specified port if in suspend mode)
+ //
+ case EfiUsbPortSuspend:
+ RHPortControl &= 0xfff5;
+ RHPortControl &= ~USBPORTSC_SUSP;
+ break;
+
+ //
+ // no operation
+ //
+ case EfiUsbPortPower:
+ break;
+
+ //
+ // clear PORT_RESET means clear the reset signal.
+ //
+ case EfiUsbPortReset:
+ RHPortControl &= 0xfff5;
+ RHPortControl &= ~USBPORTSC_PR;
+ break;
+
+ //
+ // clear connect status change
+ //
+ case EfiUsbPortConnectChange:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_CSC;
+ break;
+
+ //
+ // clear enable/disable status change
+ //
+ case EfiUsbPortEnableChange:
+ RHPortControl &= 0xfff5;
+ RHPortControl |= USBPORTSC_PEDC;
+ break;
+
+ //
+ // root hub does not support this request
+ //
+ case EfiUsbPortSuspendChange:
+ break;
+
+ //
+ // root hub does not support this request
+ //
+ case EfiUsbPortOverCurrentChange:
+ break;
+
+ //
+ // root hub does not support this request
+ //
+ case EfiUsbPortResetChange:
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ USBWritePortW (UhcDev, PSAddr, RHPortControl);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize UHCI.
+
+ @param UhcDev UHCI Device.
+
+ @retval EFI_SUCCESS UHCI successfully initialized.
+ @retval EFI_OUT_OF_RESOURCES Resource can not be allocated.
+
+**/
+EFI_STATUS
+InitializeUsbHC (
+ IN USB_UHC_DEV *UhcDev
+ )
+{
+ EFI_STATUS Status;
+ UINT32 FrameListBaseAddrReg;
+ UINT32 CommandReg;
+ UINT16 Command;
+
+ //
+ // Create and Initialize Frame List For the Host Controller.
+ //
+ Status = CreateFrameList (UhcDev);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ FrameListBaseAddrReg = UhcDev->UsbHostControllerBaseAddress + USBFLBASEADD;
+ CommandReg = UhcDev->UsbHostControllerBaseAddress + USBCMD;
+
+ //
+ // Set Frame List Base Address to the specific register to inform the hardware.
+ //
+ SetFrameListBaseAddress (UhcDev, FrameListBaseAddrReg, (UINT32) (UINTN) (UhcDev->FrameListEntry));
+
+ Command = USBReadPortW (UhcDev, CommandReg);
+ Command |= USBCMD_GRESET;
+ USBWritePortW (UhcDev, CommandReg, Command);
+
+ MicroSecondDelay (50 * 1000);
+
+
+ Command &= ~USBCMD_GRESET;
+
+ USBWritePortW (UhcDev, CommandReg, Command);
+
+ //
+ //UHCI spec page120 reset recovery time
+ //
+ MicroSecondDelay (20 * 1000);
+
+ //
+ // Set Run/Stop bit to 1.
+ //
+ Command = USBReadPortW (UhcDev, CommandReg);
+ Command |= USBCMD_RS | USBCMD_MAXP;
+ USBWritePortW (UhcDev, CommandReg, Command);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Create Frame List Structure.
+
+ @param UhcDev UHCI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateFrameList (
+ USB_UHC_DEV *UhcDev
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS FrameListBaseAddr;
+ FRAMELIST_ENTRY *FrameListPtr;
+ UINTN Index;
+
+ //
+ // The Frame List ocupies 4K bytes,
+ // and must be aligned on 4-Kbyte boundaries.
+ //
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ 1,
+ &FrameListBaseAddr
+ );
+
+ if (Status != EFI_SUCCESS) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ //Create Control QH and Bulk QH and link them into Framelist Entry
+ //
+ Status = CreateQH(UhcDev, &UhcDev->ConfigQH);
+ if (Status != EFI_SUCCESS) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = CreateQH(UhcDev, &UhcDev->BulkQH);
+ if (Status != EFI_SUCCESS) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ //Set the corresponding QH pointer
+ //
+ SetQHHorizontalLinkPtr(UhcDev->ConfigQH, UhcDev->BulkQH);
+ SetQHHorizontalQHorTDSelect (UhcDev->ConfigQH, TRUE);
+ SetQHHorizontalValidorInvalid (UhcDev->ConfigQH, TRUE);
+
+ UhcDev->FrameListEntry = (FRAMELIST_ENTRY *) ((UINTN) FrameListBaseAddr);
+
+ FrameListPtr = UhcDev->FrameListEntry;
+
+ for (Index = 0; Index < 1024; Index++) {
+ FrameListPtr->FrameListPtrTerminate = 0;
+ FrameListPtr->FrameListPtr = (UINT32)(UINTN)UhcDev->ConfigQH >> 4;
+ FrameListPtr->FrameListPtrQSelect = 1;
+ FrameListPtr->FrameListRsvd = 0;
+ FrameListPtr ++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Read a 16bit width data from Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+
+ @retval the register content read.
+
+**/
+UINT16
+USBReadPortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port
+ )
+{
+ return IoRead16 (Port);
+}
+
+/**
+ Write a 16bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT16 Data
+ )
+{
+ IoWrite16 (Port, Data);
+}
+
+/**
+ Write a 32bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortDW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT32 Data
+ )
+{
+ IoWrite32 (Port, Data);
+}
+
+/**
+ Clear the content of UHCI's Status Register.
+
+ @param UhcDev The UHCI device.
+ @param StatusAddr The IO space address of the register.
+
+**/
+VOID
+ClearStatusReg (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusAddr
+ )
+{
+ //
+ // Clear the content of UHCI's Status Register
+ //
+ USBWritePortW (UhcDev, StatusAddr, 0x003F);
+}
+
+/**
+ Check whether the host controller operates well.
+
+ @param UhcDev The UHCI device.
+ @param StatusRegAddr The io address of status register.
+
+ @retval TRUE Host controller is working.
+ @retval FALSE Host controller is halted or system error.
+
+**/
+BOOLEAN
+IsStatusOK (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusRegAddr
+ )
+{
+ UINT16 StatusValue;
+
+ StatusValue = USBReadPortW (UhcDev, StatusRegAddr);
+
+ if ((StatusValue & (USBSTS_HCPE | USBSTS_HSE | USBSTS_HCH)) != 0) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+}
+
+/**
+ Get Current Frame Number.
+
+ @param UhcDev The UHCI device.
+ @param FrameNumberAddr The address of frame list register.
+
+ @retval The content of the frame list register.
+
+**/
+UINT16
+GetCurrentFrameNumber (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameNumberAddr
+ )
+{
+ //
+ // Gets value in the USB frame number register.
+ //
+ return (UINT16) (USBReadPortW (UhcDev, FrameNumberAddr) & 0x03FF);
+}
+
+/**
+ Set Frame List Base Address.
+
+ @param UhcDev The UHCI device.
+ @param FrameListRegAddr The address of frame list register.
+ @param Addr The address of frame list table.
+
+**/
+VOID
+SetFrameListBaseAddress (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameListRegAddr,
+ IN UINT32 Addr
+ )
+{
+ //
+ // Sets value in the USB Frame List Base Address register.
+ //
+ USBWritePortDW (UhcDev, FrameListRegAddr, (UINT32) (Addr & 0xFFFFF000));
+}
+
+/**
+ Create QH and initialize.
+
+ @param UhcDev The UHCI device.
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateQH (
+ IN USB_UHC_DEV *UhcDev,
+ OUT QH_STRUCT **PtrQH
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // allocate align memory for QH_STRUCT
+ //
+ Status = AllocateTDorQHStruct (UhcDev, sizeof(QH_STRUCT), (void **)PtrQH);
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // init each field of the QH_STRUCT
+ //
+ SetQHHorizontalValidorInvalid (*PtrQH, FALSE);
+ SetQHVerticalValidorInvalid (*PtrQH, FALSE);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Set the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ )
+{
+ //
+ // Since the QH_STRUCT is aligned on 16-byte boundaries,
+ // Only the highest 28bit of the address is valid
+ // (take 32bit address as an example).
+ //
+ PtrQH->QueueHead.QHHorizontalPtr = (UINT32) (UINTN) PtrNext >> 4;
+}
+
+/**
+ Get the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The horizontal link pointer in QH.
+
+**/
+VOID *
+GetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH
+ )
+{
+ //
+ // Restore the 28bit address to 32bit address
+ // (take 32bit address as an example)
+ //
+ return (VOID *) (UINTN) ((PtrQH->QueueHead.QHHorizontalPtr) << 4);
+}
+
+/**
+ Set a QH or TD horizontally to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHHorizontalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ )
+{
+ //
+ // if QH is connected, the specified bit is set,
+ // if TD is connected, the specified bit is cleared.
+ //
+ PtrQH->QueueHead.QHHorizontalQSelect = IsQH ? 1 : 0;
+}
+
+/**
+ Set the horizontal validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the horizontal linker is valid or not.
+
+**/
+VOID
+SetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ )
+{
+ //
+ // Valid means the horizontal link pointer is valid,
+ // else, it's invalid.
+ //
+ PtrQH->QueueHead.QHHorizontalTerminate = IsValid ? 0 : 1;
+}
+
+/**
+ Set the vertical link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHVerticalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ )
+{
+ //
+ // Since the QH_STRUCT is aligned on 16-byte boundaries,
+ // Only the highest 28bit of the address is valid
+ // (take 32bit address as an example).
+ //
+ PtrQH->QueueHead.QHVerticalPtr = (UINT32) (UINTN) PtrNext >> 4;
+}
+
+/**
+ Set a QH or TD vertically to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHVerticalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ )
+{
+ //
+ // Set the specified bit if the Vertical Link Pointer pointing to a QH,
+ // Clear the specified bit if the Vertical Link Pointer pointing to a TD.
+ //
+ PtrQH->QueueHead.QHVerticalQSelect = IsQH ? 1 : 0;
+}
+
+/**
+ Set the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the vertical linker is valid or not.
+
+**/
+VOID
+SetQHVerticalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ )
+{
+ //
+ // If TRUE, meaning the Vertical Link Pointer field is valid,
+ // else, the field is invalid.
+ //
+ PtrQH->QueueHead.QHVerticalTerminate = IsValid ? 0 : 1;
+}
+
+/**
+ Get the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The vertical linker is valid or not.
+
+**/
+BOOLEAN
+GetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH
+ )
+{
+ //
+ // If TRUE, meaning the Horizontal Link Pointer field is valid,
+ // else, the field is invalid.
+ //
+ return (BOOLEAN) (!(PtrQH->QueueHead.QHHorizontalTerminate));
+}
+
+/**
+ Allocate TD or QH Struct.
+
+ @param UhcDev The UHCI device.
+ @param Size The size of allocation.
+ @param PtrStruct Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+AllocateTDorQHStruct (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Size,
+ OUT VOID **PtrStruct
+ )
+{
+ EFI_STATUS Status;
+
+ Status = EFI_SUCCESS;
+ *PtrStruct = NULL;
+
+ Status = UhcAllocatePool (
+ UhcDev,
+ (UINT8 **) PtrStruct,
+ Size
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ ZeroMem (*PtrStruct, Size);
+
+ return Status;
+}
+
+/**
+ Create a TD Struct.
+
+ @param UhcDev The UHCI device.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateTD (
+ IN USB_UHC_DEV *UhcDev,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ EFI_STATUS Status;
+ //
+ // create memory for TD_STRUCT, and align the memory.
+ //
+ Status = AllocateTDorQHStruct (UhcDev, sizeof(TD_STRUCT), (void **)PtrTD);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Make TD ready.
+ //
+ SetTDLinkPtrValidorInvalid (*PtrTD, FALSE);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Generate Setup Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param DeviceSpeed Device Speed.
+ @param DevRequest Device reuquest.
+ @param RequestLen Request length.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate setup stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenSetupStageTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 *DevRequest,
+ IN UINT8 RequestLen,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ TD_STRUCT *TdStruct;
+ EFI_STATUS Status;
+
+ Status = CreateTD (UhcDev, &TdStruct);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SetTDLinkPtr (TdStruct, NULL);
+
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (TdStruct, TRUE);
+
+ //
+ // initialize as the last TD in the QH context,
+ // this field will be updated in the TD linkage process.
+ //
+ SetTDLinkPtrValidorInvalid (TdStruct, FALSE);
+
+ //
+ // Disable Short Packet Detection by default
+ //
+ EnableorDisableTDShortPacket (TdStruct, FALSE);
+
+ //
+ // Max error counter is 3, retry 3 times when error encountered.
+ //
+ SetTDControlErrorCounter (TdStruct, 3);
+
+ //
+ // set device speed attribute
+ // (TRUE - Slow Device; FALSE - Full Speed Device)
+ //
+ switch (DeviceSpeed) {
+ case USB_SLOW_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, TRUE);
+ break;
+
+ case USB_FULL_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, FALSE);
+ break;
+ }
+ //
+ // Non isochronous transfer TD
+ //
+ SetTDControlIsochronousorNot (TdStruct, FALSE);
+
+ //
+ // Interrupt On Complete bit be set to zero,
+ // Disable IOC interrupt.
+ //
+ SetorClearTDControlIOC (TdStruct, FALSE);
+
+ //
+ // Set TD Active bit
+ //
+ SetTDStatusActiveorInactive (TdStruct, TRUE);
+
+ SetTDTokenMaxLength (TdStruct, RequestLen);
+
+ SetTDTokenDataToggle0 (TdStruct);
+
+ SetTDTokenEndPoint (TdStruct, Endpoint);
+
+ SetTDTokenDeviceAddress (TdStruct, DevAddr);
+
+ SetTDTokenPacketID (TdStruct, SETUP_PACKET_ID);
+
+ TdStruct->PtrTDBuffer = (UINT8 *) DevRequest;
+ TdStruct->TDBufferLength = RequestLen;
+ SetTDDataBuffer (TdStruct);
+
+ *PtrTD = TdStruct;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Generate Data Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PtrData Data buffer.
+ @param Len Data length.
+ @param PktID PacketID.
+ @param Toggle Data toggle value.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate data stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenDataTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 *PtrData,
+ IN UINT8 Len,
+ IN UINT8 PktID,
+ IN UINT8 Toggle,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ TD_STRUCT *TdStruct;
+ EFI_STATUS Status;
+
+ Status = CreateTD (UhcDev, &TdStruct);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SetTDLinkPtr (TdStruct, NULL);
+
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (TdStruct, TRUE);
+
+ //
+ // Link pointer pointing to TD struct
+ //
+ SetTDLinkPtrQHorTDSelect (TdStruct, FALSE);
+
+ //
+ // initialize as the last TD in the QH context,
+ // this field will be updated in the TD linkage process.
+ //
+ SetTDLinkPtrValidorInvalid (TdStruct, FALSE);
+
+ //
+ // Disable short packet detect
+ //
+ EnableorDisableTDShortPacket (TdStruct, FALSE);
+ //
+ // Max error counter is 3
+ //
+ SetTDControlErrorCounter (TdStruct, 3);
+
+ //
+ // set device speed attribute
+ // (TRUE - Slow Device; FALSE - Full Speed Device)
+ //
+ switch (DeviceSpeed) {
+ case USB_SLOW_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, TRUE);
+ break;
+
+ case USB_FULL_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (TdStruct, FALSE);
+ break;
+ }
+ //
+ // Non isochronous transfer TD
+ //
+ SetTDControlIsochronousorNot (TdStruct, FALSE);
+
+ //
+ // Disable Interrupt On Complete
+ // Disable IOC interrupt.
+ //
+ SetorClearTDControlIOC (TdStruct, FALSE);
+
+ //
+ // Set Active bit
+ //
+ SetTDStatusActiveorInactive (TdStruct, TRUE);
+
+ SetTDTokenMaxLength (TdStruct, Len);
+
+ if (Toggle != 0) {
+ SetTDTokenDataToggle1 (TdStruct);
+ } else {
+ SetTDTokenDataToggle0 (TdStruct);
+ }
+
+ SetTDTokenEndPoint (TdStruct, Endpoint);
+
+ SetTDTokenDeviceAddress (TdStruct, DevAddr);
+
+ SetTDTokenPacketID (TdStruct, PktID);
+
+ TdStruct->PtrTDBuffer = (UINT8 *) PtrData;
+ TdStruct->TDBufferLength = Len;
+ SetTDDataBuffer (TdStruct);
+
+ *PtrTD = TdStruct;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Generate Status Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PktID PacketID.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate status stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateStatusTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 PktID,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ )
+{
+ TD_STRUCT *PtrTDStruct;
+ EFI_STATUS Status;
+
+ Status = CreateTD (UhcDev, &PtrTDStruct);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SetTDLinkPtr (PtrTDStruct, NULL);
+
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (PtrTDStruct, TRUE);
+
+ //
+ // initialize as the last TD in the QH context,
+ // this field will be updated in the TD linkage process.
+ //
+ SetTDLinkPtrValidorInvalid (PtrTDStruct, FALSE);
+
+ //
+ // Disable short packet detect
+ //
+ EnableorDisableTDShortPacket (PtrTDStruct, FALSE);
+
+ //
+ // Max error counter is 3
+ //
+ SetTDControlErrorCounter (PtrTDStruct, 3);
+
+ //
+ // set device speed attribute
+ // (TRUE - Slow Device; FALSE - Full Speed Device)
+ //
+ switch (DeviceSpeed) {
+ case USB_SLOW_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (PtrTDStruct, TRUE);
+ break;
+
+ case USB_FULL_SPEED_DEVICE:
+ SetTDLoworFullSpeedDevice (PtrTDStruct, FALSE);
+ break;
+ }
+ //
+ // Non isochronous transfer TD
+ //
+ SetTDControlIsochronousorNot (PtrTDStruct, FALSE);
+
+ //
+ // Disable Interrupt On Complete
+ // Disable IOC interrupt.
+ //
+ SetorClearTDControlIOC (PtrTDStruct, FALSE);
+
+ //
+ // Set TD Active bit
+ //
+ SetTDStatusActiveorInactive (PtrTDStruct, TRUE);
+
+ SetTDTokenMaxLength (PtrTDStruct, 0);
+
+ SetTDTokenDataToggle1 (PtrTDStruct);
+
+ SetTDTokenEndPoint (PtrTDStruct, Endpoint);
+
+ SetTDTokenDeviceAddress (PtrTDStruct, DevAddr);
+
+ SetTDTokenPacketID (PtrTDStruct, PktID);
+
+ PtrTDStruct->PtrTDBuffer = NULL;
+ PtrTDStruct->TDBufferLength = 0;
+ SetTDDataBuffer (PtrTDStruct);
+
+ *PtrTD = PtrTDStruct;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Set the link pointer validor bit in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsValid Specify the linker pointer is valid or not.
+
+**/
+VOID
+SetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsValid
+ )
+{
+ //
+ // Valid means the link pointer is valid,
+ // else, it's invalid.
+ //
+ PtrTDStruct->TDData.TDLinkPtrTerminate = (IsValid ? 0 : 1);
+}
+
+/**
+ Set the Link Pointer pointing to a QH or TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetTDLinkPtrQHorTDSelect (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsQH
+ )
+{
+ //
+ // Indicate whether the Link Pointer pointing to a QH or TD
+ //
+ PtrTDStruct->TDData.TDLinkPtrQSelect = (IsQH ? 1 : 0);
+}
+
+/**
+ Set the traverse is depth-first or breadth-first.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsDepth Specify the traverse is depth-first or breadth-first.
+
+**/
+VOID
+SetTDLinkPtrDepthorBreadth (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsDepth
+ )
+{
+ //
+ // If TRUE, indicating the host controller should process in depth first fashion,
+ // else, the host controller should process in breadth first fashion
+ //
+ PtrTDStruct->TDData.TDLinkPtrDepthSelect = (IsDepth ? 1 : 0);
+}
+
+/**
+ Set TD Link Pointer in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PtrNext Place to the next TD_STRUCT.
+
+**/
+VOID
+SetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct,
+ IN VOID *PtrNext
+ )
+{
+ //
+ // Set TD Link Pointer. Since QH,TD align on 16-byte boundaries,
+ // only the highest 28 bits are valid. (if take 32bit address as an example)
+ //
+ PtrTDStruct->TDData.TDLinkPtr = (UINT32) (UINTN) PtrNext >> 4;
+}
+
+/**
+ Get TD Link Pointer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval Get TD Link Pointer in TD.
+
+**/
+VOID *
+GetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Get TD Link Pointer. Restore it back to 32bit
+ // (if take 32bit address as an example)
+ //
+ return (VOID *) (UINTN) ((PtrTDStruct->TDData.TDLinkPtr) << 4);
+}
+
+/**
+ Get the information about whether the Link Pointer field pointing to
+ a QH or a TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval whether the Link Pointer field pointing to a QH or a TD.
+
+**/
+BOOLEAN
+IsTDLinkPtrQHOrTD (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Get the information about whether the Link Pointer field pointing to
+ // a QH or a TD.
+ //
+ return (BOOLEAN) (PtrTDStruct->TDData.TDLinkPtrQSelect);
+}
+
+/**
+ Enable/Disable short packet detection mechanism.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsEnable Enable or disable short packet detection mechanism.
+
+**/
+VOID
+EnableorDisableTDShortPacket (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsEnable
+ )
+{
+ //
+ // TRUE means enable short packet detection mechanism.
+ //
+ PtrTDStruct->TDData.TDStatusSPD = (IsEnable ? 1 : 0);
+}
+
+/**
+ Set the max error counter in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxErrors The number of allowable error.
+
+**/
+VOID
+SetTDControlErrorCounter (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 MaxErrors
+ )
+{
+ //
+ // valid value of MaxErrors is 0,1,2,3
+ //
+ if (MaxErrors > 3) {
+ MaxErrors = 3;
+ }
+
+ PtrTDStruct->TDData.TDStatusErr = MaxErrors;
+}
+
+/**
+ Set the TD is targeting a low-speed device or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsLowSpeedDevice Whether The device is low-speed.
+
+**/
+VOID
+SetTDLoworFullSpeedDevice (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsLowSpeedDevice
+ )
+{
+ //
+ // TRUE means the TD is targeting at a Low-speed device
+ //
+ PtrTDStruct->TDData.TDStatusLS = (IsLowSpeedDevice ? 1 : 0);
+}
+
+/**
+ Set the TD is isochronous transfer type or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsIsochronous Whether the transaction isochronous transfer type.
+
+**/
+VOID
+SetTDControlIsochronousorNot (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsIsochronous
+ )
+{
+ //
+ // TRUE means the TD belongs to Isochronous transfer type.
+ //
+ PtrTDStruct->TDData.TDStatusIOS = (IsIsochronous ? 1 : 0);
+}
+
+/**
+ Set if UCHI should issue an interrupt on completion of the frame
+ in which this TD is executed
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsSet Whether HC should issue an interrupt on completion.
+
+**/
+VOID
+SetorClearTDControlIOC (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsSet
+ )
+{
+ //
+ // If this bit is set, it indicates that the host controller should issue
+ // an interrupt on completion of the frame in which this TD is executed.
+ //
+ PtrTDStruct->TDData.TDStatusIOC = IsSet ? 1 : 0;
+}
+
+/**
+ Set if the TD is active and can be executed.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsActive Whether the TD is active and can be executed.
+
+**/
+VOID
+SetTDStatusActiveorInactive (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsActive
+ )
+{
+ //
+ // If this bit is set, it indicates that the TD is active and can be
+ // executed.
+ //
+ if (IsActive) {
+ PtrTDStruct->TDData.TDStatus |= 0x80;
+ } else {
+ PtrTDStruct->TDData.TDStatus &= 0x7F;
+ }
+}
+
+/**
+ Specifies the maximum number of data bytes allowed for the transfer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxLen The maximum number of data bytes allowed.
+
+ @retval The allowed maximum number of data.
+**/
+UINT16
+SetTDTokenMaxLength (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT16 MaxLen
+ )
+{
+ //
+ // Specifies the maximum number of data bytes allowed for the transfer.
+ // the legal value extent is 0 ~ 0x500.
+ //
+ if (MaxLen > 0x500) {
+ MaxLen = 0x500;
+ }
+
+ PtrTDStruct->TDData.TDTokenMaxLen = MaxLen - 1;
+
+ return MaxLen;
+}
+
+/**
+ Set the data toggle bit to DATA1.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle1 (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Set the data toggle bit to DATA1
+ //
+ PtrTDStruct->TDData.TDTokenDataToggle = 1;
+}
+
+/**
+ Set the data toggle bit to DATA0.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle0 (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Set the data toggle bit to DATA0
+ //
+ PtrTDStruct->TDData.TDTokenDataToggle = 0;
+}
+
+/**
+ Set EndPoint Number the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param EndPoint The Endport number of the target.
+
+**/
+VOID
+SetTDTokenEndPoint (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN EndPoint
+ )
+{
+ //
+ // Set EndPoint Number the TD is targeting at.
+ //
+ PtrTDStruct->TDData.TDTokenEndPt = (UINT8) EndPoint;
+}
+
+/**
+ Set Device Address the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param DevAddr The Device Address of the target.
+
+**/
+VOID
+SetTDTokenDeviceAddress (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN DevAddr
+ )
+{
+ //
+ // Set Device Address the TD is targeting at.
+ //
+ PtrTDStruct->TDData.TDTokenDevAddr = (UINT8) DevAddr;
+}
+
+/**
+ Set Packet Identification the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PacketID The Packet Identification of the target.
+
+**/
+VOID
+SetTDTokenPacketID (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 PacketID
+ )
+{
+ //
+ // Set the Packet Identification to be used for this transaction.
+ //
+ PtrTDStruct->TDData.TDTokenPID = PacketID;
+}
+
+/**
+ Set the beginning address of the data buffer that will be used
+ during the transaction.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDDataBuffer (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Set the beginning address of the data buffer that will be used
+ // during the transaction.
+ //
+ PtrTDStruct->TDData.TDBufferPtr = (UINT32) (UINTN) (PtrTDStruct->PtrTDBuffer);
+}
+
+/**
+ Detect whether the TD is active.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is active or not.
+
+**/
+BOOLEAN
+IsTDStatusActive (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether the TD is active.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x80);
+}
+
+/**
+ Detect whether the TD is stalled.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is stalled or not.
+
+**/
+BOOLEAN
+IsTDStatusStalled (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether the device/endpoint addressed by this TD is stalled.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x40);
+}
+
+/**
+ Detect whether Data Buffer Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Data Buffer Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBufferError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether Data Buffer Error is happened.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x20);
+}
+
+/**
+ Detect whether Babble Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Babble Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBabbleError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether Babble Error is happened.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x10);
+}
+
+/**
+ Detect whether NAK is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The NAK is received or not.
+
+**/
+BOOLEAN
+IsTDStatusNAKReceived (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether NAK is received.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x08);
+}
+
+/**
+ Detect whether CRC/Time Out Error is encountered.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The CRC/Time Out Error is encountered or not.
+
+**/
+BOOLEAN
+IsTDStatusCRCTimeOutError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether CRC/Time Out Error is encountered.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x04);
+}
+
+/**
+ Detect whether Bitstuff Error is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Bitstuff Error is received or not.
+
+**/
+BOOLEAN
+IsTDStatusBitStuffError (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ UINT8 TDStatus;
+
+ //
+ // Detect whether Bitstuff Error is received.
+ //
+ TDStatus = (UINT8) (PtrTDStruct->TDData.TDStatus);
+ return (BOOLEAN) (TDStatus & 0x02);
+}
+
+/**
+ Retrieve the actual number of bytes that were tansferred.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The actual number of bytes that were tansferred.
+
+**/
+UINT16
+GetTDStatusActualLength (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Retrieve the actual number of bytes that were tansferred.
+ // the value is encoded as n-1. so return the decoded value.
+ //
+ return (UINT16) ((PtrTDStruct->TDData.TDStatusActualLength) + 1);
+}
+
+/**
+ Retrieve the information of whether the Link Pointer field is valid or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The linker pointer field is valid or not.
+
+**/
+BOOLEAN
+GetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct
+ )
+{
+ //
+ // Retrieve the information of whether the Link Pointer field
+ // is valid or not.
+ //
+ if ((PtrTDStruct->TDData.TDLinkPtrTerminate & BIT0) != 0) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+
+}
+
+/**
+ Count TD Number from PtrFirstTD.
+
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+ @retval The queued TDs number.
+
+**/
+UINTN
+CountTDsNumber (
+ IN TD_STRUCT *PtrFirstTD
+ )
+{
+ UINTN Number;
+ TD_STRUCT *Ptr;
+
+ //
+ // Count the queued TDs number.
+ //
+ Number = 0;
+ Ptr = PtrFirstTD;
+ while (Ptr != 0) {
+ Ptr = (TD_STRUCT *) Ptr->PtrNextTD;
+ Number++;
+ }
+
+ return Number;
+}
+
+/**
+ Link TD To QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToQH (
+ IN QH_STRUCT *PtrQH,
+ IN TD_STRUCT *PtrTD
+ )
+{
+ if (PtrQH == NULL || PtrTD == NULL) {
+ return ;
+ }
+ //
+ // Validate QH Vertical Ptr field
+ //
+ SetQHVerticalValidorInvalid (PtrQH, TRUE);
+
+ //
+ // Vertical Ptr pointing to TD structure
+ //
+ SetQHVerticalQHorTDSelect (PtrQH, FALSE);
+
+ SetQHVerticalLinkPtr (PtrQH, (VOID *) PtrTD);
+
+ PtrQH->PtrDown = (VOID *) PtrTD;
+}
+
+/**
+ Link TD To TD.
+
+ @param PtrPreTD Place to store TD_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToTD (
+ IN TD_STRUCT *PtrPreTD,
+ IN TD_STRUCT *PtrTD
+ )
+{
+ if (PtrPreTD == NULL || PtrTD == NULL) {
+ return ;
+ }
+ //
+ // Depth first fashion
+ //
+ SetTDLinkPtrDepthorBreadth (PtrPreTD, TRUE);
+
+ //
+ // Link pointer pointing to TD struct
+ //
+ SetTDLinkPtrQHorTDSelect (PtrPreTD, FALSE);
+
+ //
+ // Validate the link pointer valid bit
+ //
+ SetTDLinkPtrValidorInvalid (PtrPreTD, TRUE);
+
+ SetTDLinkPtr (PtrPreTD, PtrTD);
+
+ PtrPreTD->PtrNextTD = (VOID *) PtrTD;
+
+ PtrTD->PtrNextTD = NULL;
+}
+
+/**
+ Execute Control Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecuteControlTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ OUT UINTN *ActualLen,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ UINTN ErrTDPos;
+ UINTN Delay;
+
+ ErrTDPos = 0;
+ *TransferResult = EFI_USB_NOERROR;
+ *ActualLen = 0;
+
+ Delay = (TimeOut * STALL_1_MILLI_SECOND / 200) + 1;
+
+ do {
+
+ CheckTDsResults (PtrTD, TransferResult, &ErrTDPos, ActualLen);
+
+ //
+ // TD is inactive, means the control transfer is end.
+ //
+ if ((*TransferResult & EFI_USB_ERR_NOTEXECUTE) != EFI_USB_ERR_NOTEXECUTE) {
+ break;
+ }
+ MicroSecondDelay (200);
+ Delay--;
+
+ } while (Delay != 0);
+
+
+ if (*TransferResult != EFI_USB_NOERROR) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Execute Bulk Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param DataToggle DataToggle value.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecBulkTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ IN OUT UINTN *ActualLen,
+ IN UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ )
+{
+ UINTN ErrTDPos;
+ UINTN ScrollNum;
+ UINTN Delay;
+
+ ErrTDPos = 0;
+ *TransferResult = EFI_USB_NOERROR;
+ *ActualLen = 0;
+
+ Delay = (TimeOut * STALL_1_MILLI_SECOND / 200) + 1;
+
+ do {
+
+ CheckTDsResults (PtrTD, TransferResult, &ErrTDPos, ActualLen);
+ //
+ // TD is inactive, thus meaning bulk transfer's end.
+ //
+ if ((*TransferResult & EFI_USB_ERR_NOTEXECUTE) != EFI_USB_ERR_NOTEXECUTE) {
+ break;
+ }
+ MicroSecondDelay (200);
+ Delay--;
+
+ } while (Delay != 0);
+
+ //
+ // has error
+ //
+ if (*TransferResult != EFI_USB_NOERROR) {
+ //
+ // scroll the Data Toggle back to the last success TD
+ //
+ ScrollNum = CountTDsNumber (PtrTD) - ErrTDPos;
+ if ((ScrollNum % 2) != 0) {
+ *DataToggle ^= 1;
+ }
+
+ //
+ // If error, wait 100ms to retry by upper layer
+ //
+ MicroSecondDelay (100 * 1000);
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Delete Queued TDs.
+
+ @param UhcDev The UCHI device.
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+DeleteQueuedTDs (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrFirstTD
+ )
+{
+ TD_STRUCT *Tptr1;
+
+ TD_STRUCT *Tptr2;
+
+ Tptr1 = PtrFirstTD;
+ //
+ // Delete all the TDs in a queue.
+ //
+ while (Tptr1 != NULL) {
+
+ Tptr2 = Tptr1;
+
+ if (!GetTDLinkPtrValidorInvalid (Tptr2)) {
+ Tptr1 = NULL;
+ } else {
+ //
+ // has more than one TD in the queue.
+ //
+ Tptr1 = GetTDLinkPtr (Tptr2);
+ }
+
+ UhcFreePool (UhcDev, (UINT8 *) Tptr2, sizeof (TD_STRUCT));
+ }
+
+ return ;
+}
+
+/**
+ Check TDs Results.
+
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param Result The result to return.
+ @param ErrTDPos The Error TD position.
+ @param ActualTransferSize Actual transfer size.
+
+ @retval The TD is executed successfully or not.
+
+**/
+BOOLEAN
+CheckTDsResults (
+ IN TD_STRUCT *PtrTD,
+ OUT UINT32 *Result,
+ OUT UINTN *ErrTDPos,
+ OUT UINTN *ActualTransferSize
+ )
+{
+ UINTN Len;
+
+ *Result = EFI_USB_NOERROR;
+ *ErrTDPos = 0;
+
+ //
+ // Init to zero.
+ //
+ *ActualTransferSize = 0;
+
+ while (PtrTD != NULL) {
+
+ if (IsTDStatusActive (PtrTD)) {
+ *Result |= EFI_USB_ERR_NOTEXECUTE;
+ }
+
+ if (IsTDStatusStalled (PtrTD)) {
+ *Result |= EFI_USB_ERR_STALL;
+ }
+
+ if (IsTDStatusBufferError (PtrTD)) {
+ *Result |= EFI_USB_ERR_BUFFER;
+ }
+
+ if (IsTDStatusBabbleError (PtrTD)) {
+ *Result |= EFI_USB_ERR_BABBLE;
+ }
+
+ if (IsTDStatusNAKReceived (PtrTD)) {
+ *Result |= EFI_USB_ERR_NAK;
+ }
+
+ if (IsTDStatusCRCTimeOutError (PtrTD)) {
+ *Result |= EFI_USB_ERR_TIMEOUT;
+ }
+
+ if (IsTDStatusBitStuffError (PtrTD)) {
+ *Result |= EFI_USB_ERR_BITSTUFF;
+ }
+ //
+ // Accumulate actual transferred data length in each TD.
+ //
+ Len = GetTDStatusActualLength (PtrTD) & 0x7FF;
+ *ActualTransferSize += Len;
+
+ //
+ // if any error encountered, stop processing the left TDs.
+ //
+ if ((*Result) != 0) {
+ return FALSE;
+ }
+
+ PtrTD = (TD_STRUCT *) (PtrTD->PtrNextTD);
+ //
+ // Record the first Error TD's position in the queue,
+ // this value is zero-based.
+ //
+ (*ErrTDPos)++;
+ }
+
+ return TRUE;
+}
+
+/**
+ Create Memory Block.
+
+ @param UhcDev The UCHI device.
+ @param MemoryHeader The Pointer to allocated memory block.
+ @param MemoryBlockSizeInPages The page size of memory block to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateMemoryBlock (
+ IN USB_UHC_DEV *UhcDev,
+ OUT MEMORY_MANAGE_HEADER **MemoryHeader,
+ IN UINTN MemoryBlockSizeInPages
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS TempPtr;
+ UINTN MemPages;
+ UINT8 *Ptr;
+
+ //
+ // Memory Block uses MemoryBlockSizeInPages pages,
+ // memory management header and bit array use 1 page
+ //
+ MemPages = MemoryBlockSizeInPages + 1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ MemPages,
+ &TempPtr
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Ptr = (UINT8 *) ((UINTN) TempPtr);
+
+ ZeroMem (Ptr, MemPages * EFI_PAGE_SIZE);
+
+ *MemoryHeader = (MEMORY_MANAGE_HEADER *) Ptr;
+ //
+ // adjust Ptr pointer to the next empty memory
+ //
+ Ptr += sizeof (MEMORY_MANAGE_HEADER);
+ //
+ // Set Bit Array initial address
+ //
+ (*MemoryHeader)->BitArrayPtr = Ptr;
+
+ (*MemoryHeader)->Next = NULL;
+
+ //
+ // Memory block initial address
+ //
+ Ptr = (UINT8 *) ((UINTN) TempPtr);
+ Ptr += EFI_PAGE_SIZE;
+ (*MemoryHeader)->MemoryBlockPtr = Ptr;
+ //
+ // set Memory block size
+ //
+ (*MemoryHeader)->MemoryBlockSizeInBytes = MemoryBlockSizeInPages * EFI_PAGE_SIZE;
+ //
+ // each bit in Bit Array will manage 32byte memory in memory block
+ //
+ (*MemoryHeader)->BitArraySizeInBytes = ((*MemoryHeader)->MemoryBlockSizeInBytes / 32) / 8;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+InitializeMemoryManagement (
+ IN USB_UHC_DEV *UhcDev
+ )
+{
+ MEMORY_MANAGE_HEADER *MemoryHeader;
+ EFI_STATUS Status;
+ UINTN MemPages;
+
+ MemPages = NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES;
+ Status = CreateMemoryBlock (UhcDev, &MemoryHeader, MemPages);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ UhcDev->Header1 = MemoryHeader;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param AllocSize The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+UhcAllocatePool (
+ IN USB_UHC_DEV *UhcDev,
+ OUT UINT8 **Pool,
+ IN UINTN AllocSize
+ )
+{
+ MEMORY_MANAGE_HEADER *MemoryHeader;
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+ MEMORY_MANAGE_HEADER *NewMemoryHeader;
+ UINTN RealAllocSize;
+ UINTN MemoryBlockSizeInPages;
+ EFI_STATUS Status;
+
+ *Pool = NULL;
+
+ MemoryHeader = UhcDev->Header1;
+
+ //
+ // allocate unit is 32 byte (align on 32 byte)
+ //
+ if ((AllocSize & 0x1F) != 0) {
+ RealAllocSize = (AllocSize / 32 + 1) * 32;
+ } else {
+ RealAllocSize = AllocSize;
+ }
+
+ Status = EFI_NOT_FOUND;
+ for (TempHeaderPtr = MemoryHeader; TempHeaderPtr != NULL; TempHeaderPtr = TempHeaderPtr->Next) {
+
+ Status = AllocMemInMemoryBlock (
+ TempHeaderPtr,
+ (VOID **) Pool,
+ RealAllocSize / 32
+ );
+ if (!EFI_ERROR (Status)) {
+ return EFI_SUCCESS;
+ }
+ }
+ //
+ // There is no enough memory,
+ // Create a new Memory Block
+ //
+ //
+ // if pool size is larger than NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES,
+ // just allocate a large enough memory block.
+ //
+ if (RealAllocSize > (NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES * EFI_PAGE_SIZE)) {
+ MemoryBlockSizeInPages = RealAllocSize / EFI_PAGE_SIZE + 1;
+ } else {
+ MemoryBlockSizeInPages = NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES;
+ }
+
+ Status = CreateMemoryBlock (UhcDev, &NewMemoryHeader, MemoryBlockSizeInPages);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Link the new Memory Block to the Memory Header list
+ //
+ InsertMemoryHeaderToList (MemoryHeader, NewMemoryHeader);
+
+ Status = AllocMemInMemoryBlock (
+ NewMemoryHeader,
+ (VOID **) Pool,
+ RealAllocSize / 32
+ );
+ return Status;
+}
+
+/**
+ Alloc Memory In MemoryBlock.
+
+ @param MemoryHeader The pointer to memory manage header.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param NumberOfMemoryUnit The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+AllocMemInMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ OUT VOID **Pool,
+ IN UINTN NumberOfMemoryUnit
+ )
+{
+ UINTN TempBytePos;
+ UINTN FoundBytePos;
+ UINT8 Index;
+ UINT8 FoundBitPos;
+ UINT8 ByteValue;
+ UINT8 BitValue;
+ UINTN NumberOfZeros;
+ UINTN Count;
+
+ FoundBytePos = 0;
+ FoundBitPos = 0;
+
+ ByteValue = MemoryHeader->BitArrayPtr[0];
+ NumberOfZeros = 0;
+ Index = 0;
+ for (TempBytePos = 0; TempBytePos < MemoryHeader->BitArraySizeInBytes;) {
+ //
+ // Pop out BitValue from a byte in TempBytePos.
+ //
+ BitValue = (UINT8)(ByteValue & 0x1);
+
+ if (BitValue == 0) {
+ //
+ // Found a free bit, the NumberOfZeros only record the number of those consecutive zeros
+ //
+ NumberOfZeros++;
+ //
+ // Found enough consecutive free space, break the loop
+ //
+ if (NumberOfZeros >= NumberOfMemoryUnit) {
+ break;
+ }
+ } else {
+ //
+ // Encountering a '1', meant the bit is ocupied.
+ //
+ if (NumberOfZeros >= NumberOfMemoryUnit) {
+ //
+ // Found enough consecutive free space,break the loop
+ //
+ break;
+ } else {
+ //
+ // the NumberOfZeros only record the number of those consecutive zeros,
+ // so reset the NumberOfZeros to 0 when encountering '1' before finding
+ // enough consecutive '0's
+ //
+ NumberOfZeros = 0;
+ //
+ // reset the (FoundBytePos,FoundBitPos) to the position of '1'
+ //
+ FoundBytePos = TempBytePos;
+ FoundBitPos = Index;
+ }
+ }
+ //
+ // right shift the byte
+ //
+ ByteValue /= 2;
+
+ //
+ // step forward a bit
+ //
+ Index++;
+ if (Index == 8) {
+ //
+ // step forward a byte, getting the byte value,
+ // and reset the bit pos.
+ //
+ TempBytePos += 1;
+ ByteValue = MemoryHeader->BitArrayPtr[TempBytePos];
+ Index = 0;
+ }
+ }
+
+ if (NumberOfZeros < NumberOfMemoryUnit) {
+ return EFI_NOT_FOUND;
+ }
+ //
+ // Found enough free space.
+ //
+ //
+ // The values recorded in (FoundBytePos,FoundBitPos) have two conditions:
+ // 1)(FoundBytePos,FoundBitPos) record the position
+ // of the last '1' before the consecutive '0's, it must
+ // be adjusted to the start position of the consecutive '0's.
+ // 2)the start address of the consecutive '0's is just the start of
+ // the bitarray. so no need to adjust the values of (FoundBytePos,FoundBitPos).
+ //
+ if ((MemoryHeader->BitArrayPtr[0] & BIT0) != 0) {
+ FoundBitPos += 1;
+ }
+ //
+ // Have the (FoundBytePos,FoundBitPos) make sense.
+ //
+ if (FoundBitPos > 7) {
+ FoundBytePos += 1;
+ FoundBitPos -= 8;
+ }
+ //
+ // Set the memory as allocated
+ //
+ for (TempBytePos = FoundBytePos, Index = FoundBitPos, Count = 0; Count < NumberOfMemoryUnit; Count++) {
+
+ MemoryHeader->BitArrayPtr[TempBytePos] = (UINT8) (MemoryHeader->BitArrayPtr[TempBytePos] | (1 << Index));
+ Index++;
+ if (Index == 8) {
+ TempBytePos += 1;
+ Index = 0;
+ }
+ }
+
+ *Pool = MemoryHeader->MemoryBlockPtr + (FoundBytePos * 8 + FoundBitPos) * 32;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Uhci Free Pool.
+
+ @param UhcDev The UHCI device.
+ @param Pool A pointer to store the buffer address.
+ @param AllocSize The size of the pool to be freed.
+
+**/
+VOID
+UhcFreePool (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 *Pool,
+ IN UINTN AllocSize
+ )
+{
+ MEMORY_MANAGE_HEADER *MemoryHeader;
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+ UINTN StartBytePos;
+ UINTN Index;
+ UINT8 StartBitPos;
+ UINT8 Index2;
+ UINTN Count;
+ UINTN RealAllocSize;
+
+ MemoryHeader = UhcDev->Header1;
+
+ //
+ // allocate unit is 32 byte (align on 32 byte)
+ //
+ if ((AllocSize & 0x1F) != 0) {
+ RealAllocSize = (AllocSize / 32 + 1) * 32;
+ } else {
+ RealAllocSize = AllocSize;
+ }
+
+ for (TempHeaderPtr = MemoryHeader; TempHeaderPtr != NULL;
+ TempHeaderPtr = TempHeaderPtr->Next) {
+
+ if ((Pool >= TempHeaderPtr->MemoryBlockPtr) &&
+ ((Pool + RealAllocSize) <= (TempHeaderPtr->MemoryBlockPtr +
+ TempHeaderPtr->MemoryBlockSizeInBytes))) {
+
+ //
+ // Pool is in the Memory Block area,
+ // find the start byte and bit in the bit array
+ //
+ StartBytePos = ((Pool - TempHeaderPtr->MemoryBlockPtr) / 32) / 8;
+ StartBitPos = (UINT8) (((Pool - TempHeaderPtr->MemoryBlockPtr) / 32) % 8);
+
+ //
+ // reset associated bits in bit arry
+ //
+ for (Index = StartBytePos, Index2 = StartBitPos, Count = 0; Count < (RealAllocSize / 32); Count++) {
+
+ TempHeaderPtr->BitArrayPtr[Index] = (UINT8) (TempHeaderPtr->BitArrayPtr[Index] ^ (1 << Index2));
+ Index2++;
+ if (Index2 == 8) {
+ Index += 1;
+ Index2 = 0;
+ }
+ }
+ //
+ // break the loop
+ //
+ break;
+ }
+ }
+
+}
+
+/**
+ Insert a new memory header into list.
+
+ @param MemoryHeader A pointer to the memory header list.
+ @param NewMemoryHeader A new memory header to be inserted into the list.
+
+**/
+VOID
+InsertMemoryHeaderToList (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ IN MEMORY_MANAGE_HEADER *NewMemoryHeader
+ )
+{
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+
+ for (TempHeaderPtr = MemoryHeader; TempHeaderPtr != NULL; TempHeaderPtr = TempHeaderPtr->Next) {
+ if (TempHeaderPtr->Next == NULL) {
+ TempHeaderPtr->Next = NewMemoryHeader;
+ break;
+ }
+ }
+}
+
+/**
+ Judge the memory block in the memory header is empty or not.
+
+ @param MemoryHeaderPtr A pointer to the memory header list.
+
+ @retval Whether the memory block in the memory header is empty or not.
+
+**/
+BOOLEAN
+IsMemoryBlockEmptied (
+ IN MEMORY_MANAGE_HEADER *MemoryHeaderPtr
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < MemoryHeaderPtr->BitArraySizeInBytes; Index++) {
+ if (MemoryHeaderPtr->BitArrayPtr[Index] != 0) {
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
+
+/**
+ remove a memory header from list.
+
+ @param FirstMemoryHeader A pointer to the memory header list.
+ @param FreeMemoryHeader A memory header to be removed into the list.
+
+**/
+VOID
+DelinkMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *FirstMemoryHeader,
+ IN MEMORY_MANAGE_HEADER *FreeMemoryHeader
+ )
+{
+ MEMORY_MANAGE_HEADER *TempHeaderPtr;
+
+ if ((FirstMemoryHeader == NULL) || (FreeMemoryHeader == NULL)) {
+ return ;
+ }
+
+ for (TempHeaderPtr = FirstMemoryHeader; TempHeaderPtr != NULL; TempHeaderPtr = TempHeaderPtr->Next) {
+
+ if (TempHeaderPtr->Next == FreeMemoryHeader) {
+ //
+ // Link the before and after
+ //
+ TempHeaderPtr->Next = FreeMemoryHeader->Next;
+ break;
+ }
+ }
+}
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h new file mode 100644 index 0000000000..dc697ce105 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h @@ -0,0 +1,1332 @@ +/** @file
+Private Header file for Usb Host Controller PEIM
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _RECOVERY_UHC_H_
+#define _RECOVERY_UHC_H_
+
+
+#include <PiPei.h>
+
+#include <Ppi/UsbController.h>
+#include <Ppi/UsbHostController.h>
+
+#include <Library/DebugLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/TimerLib.h>
+#include <Library/IoLib.h>
+#include <Library/PeiServicesLib.h>
+
+#define USB_SLOW_SPEED_DEVICE 0x01
+#define USB_FULL_SPEED_DEVICE 0x02
+
+//
+// One memory block uses 16 page
+//
+#define NORMAL_MEMORY_BLOCK_UNIT_IN_PAGES 16
+
+#define USBCMD 0 /* Command Register Offset 00-01h */
+#define USBCMD_RS BIT0 /* Run/Stop */
+#define USBCMD_HCRESET BIT1 /* Host reset */
+#define USBCMD_GRESET BIT2 /* Global reset */
+#define USBCMD_EGSM BIT3 /* Global Suspend Mode */
+#define USBCMD_FGR BIT4 /* Force Global Resume */
+#define USBCMD_SWDBG BIT5 /* SW Debug mode */
+#define USBCMD_CF BIT6 /* Config Flag (sw only) */
+#define USBCMD_MAXP BIT7 /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS 2 /* Status Register Offset 02-03h */
+#define USBSTS_USBINT BIT0 /* Interrupt due to IOC */
+#define USBSTS_ERROR BIT1 /* Interrupt due to error */
+#define USBSTS_RD BIT2 /* Resume Detect */
+#define USBSTS_HSE BIT3 /* Host System Error - basically PCI problems */
+#define USBSTS_HCPE BIT4 /* Host Controller Process Error - the scripts were buggy */
+#define USBSTS_HCH BIT5 /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR 4 /* Interrupt Enable Register 04-05h */
+#define USBINTR_TIMEOUT BIT0 /* Timeout/CRC error enable */
+#define USBINTR_RESUME BIT1 /* Resume interrupt enable */
+#define USBINTR_IOC BIT2 /* Interrupt On Complete enable */
+#define USBINTR_SP BIT3 /* Short packet interrupt enable */
+
+/* Frame Number Register Offset 06-08h */
+#define USBFRNUM 6
+
+/* Frame List Base Address Register Offset 08-0Bh */
+#define USBFLBASEADD 8
+
+/* Start of Frame Modify Register Offset 0Ch */
+#define USBSOF 0x0c
+
+/* USB port status and control registers */
+#define USBPORTSC1 0x10 /*Port 1 offset 10-11h */
+#define USBPORTSC2 0x12 /*Port 2 offset 12-13h */
+
+#define USBPORTSC_CCS BIT0 /* Current Connect Status ("device present") */
+#define USBPORTSC_CSC BIT1 /* Connect Status Change */
+#define USBPORTSC_PED BIT2 /* Port Enable / Disable */
+#define USBPORTSC_PEDC BIT3 /* Port Enable / Disable Change */
+#define USBPORTSC_LSL BIT4 /* Line Status Low bit*/
+#define USBPORTSC_LSH BIT5 /* Line Status High bit*/
+#define USBPORTSC_RD BIT6 /* Resume Detect */
+#define USBPORTSC_LSDA BIT8 /* Low Speed Device Attached */
+#define USBPORTSC_PR BIT9 /* Port Reset */
+#define USBPORTSC_SUSP BIT12 /* Suspend */
+
+#define SETUP_PACKET_ID 0x2D
+#define INPUT_PACKET_ID 0x69
+#define OUTPUT_PACKET_ID 0xE1
+#define ERROR_PACKET_ID 0x55
+
+#define STALL_1_MILLI_SECOND 1000
+
+
+#pragma pack(1)
+
+typedef struct {
+ UINT32 FrameListPtrTerminate : 1;
+ UINT32 FrameListPtrQSelect : 1;
+ UINT32 FrameListRsvd : 2;
+ UINT32 FrameListPtr : 28;
+} FRAMELIST_ENTRY;
+
+typedef struct {
+ UINT32 QHHorizontalTerminate : 1;
+ UINT32 QHHorizontalQSelect : 1;
+ UINT32 QHHorizontalRsvd : 2;
+ UINT32 QHHorizontalPtr : 28;
+ UINT32 QHVerticalTerminate : 1;
+ UINT32 QHVerticalQSelect : 1;
+ UINT32 QHVerticalRsvd : 2;
+ UINT32 QHVerticalPtr : 28;
+} QUEUE_HEAD;
+
+typedef struct {
+ QUEUE_HEAD QueueHead;
+ UINT32 Reserved1;
+ UINT32 Reserved2;
+ VOID *PtrNext;
+ VOID *PtrDown;
+ VOID *Reserved3;
+ UINT32 Reserved4;
+} QH_STRUCT;
+
+typedef struct {
+ UINT32 TDLinkPtrTerminate : 1;
+ UINT32 TDLinkPtrQSelect : 1;
+ UINT32 TDLinkPtrDepthSelect : 1;
+ UINT32 TDLinkPtrRsvd : 1;
+ UINT32 TDLinkPtr : 28;
+ UINT32 TDStatusActualLength : 11;
+ UINT32 TDStatusRsvd : 5;
+ UINT32 TDStatus : 8;
+ UINT32 TDStatusIOC : 1;
+ UINT32 TDStatusIOS : 1;
+ UINT32 TDStatusLS : 1;
+ UINT32 TDStatusErr : 2;
+ UINT32 TDStatusSPD : 1;
+ UINT32 TDStatusRsvd2 : 2;
+ UINT32 TDTokenPID : 8;
+ UINT32 TDTokenDevAddr : 7;
+ UINT32 TDTokenEndPt : 4;
+ UINT32 TDTokenDataToggle : 1;
+ UINT32 TDTokenRsvd : 1;
+ UINT32 TDTokenMaxLen : 11;
+ UINT32 TDBufferPtr;
+} TD;
+
+typedef struct {
+ TD TDData;
+ UINT8 *PtrTDBuffer;
+ VOID *PtrNextTD;
+ VOID *PtrNextQH;
+ UINT16 TDBufferLength;
+ UINT16 Reserved;
+} TD_STRUCT;
+
+#pragma pack()
+
+typedef struct _MEMORY_MANAGE_HEADER MEMORY_MANAGE_HEADER;
+
+struct _MEMORY_MANAGE_HEADER {
+ UINT8 *BitArrayPtr;
+ UINTN BitArraySizeInBytes;
+ UINT8 *MemoryBlockPtr;
+ UINTN MemoryBlockSizeInBytes;
+ MEMORY_MANAGE_HEADER *Next;
+};
+
+#define USB_UHC_DEV_SIGNATURE SIGNATURE_32 ('p', 'u', 'h', 'c')
+typedef struct {
+ UINTN Signature;
+ PEI_USB_HOST_CONTROLLER_PPI UsbHostControllerPpi;
+ EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
+
+ UINT32 UsbHostControllerBaseAddress;
+ FRAMELIST_ENTRY *FrameListEntry;
+ QH_STRUCT *ConfigQH;
+ QH_STRUCT *BulkQH;
+ //
+ // Header1 used for QH,TD memory blocks management
+ //
+ MEMORY_MANAGE_HEADER *Header1;
+
+} USB_UHC_DEV;
+
+#define PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS(a) CR (a, USB_UHC_DEV, UsbHostControllerPpi, USB_UHC_DEV_SIGNATURE)
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress The target device address.
+ @param DeviceSpeed Target device speed.
+ @param MaximumPacketLength Maximum packet size the default control transfer
+ endpoint is capable of sending or receiving.
+ @param Request USB device request to send.
+ @param TransferDirection Specifies the data direction for the data stage.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+ @param TimeOut Indicates the maximum timeout, in millisecond.
+ @param TransferResult Return the result of this control transfer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI * This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST * Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data OPTIONAL,
+ IN OUT UINTN *DataLength OPTIONAL,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction in bit 7.
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ sending or receiving.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param DataToggle On input, the initial data toggle for the transfer;
+ On output, it is updated to to next data toggle to use of
+ the subsequent bulk transfer.
+ @param TimeOut Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+ @param TransferResult A pointer to the detailed result information of the
+ bulk transfer.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortNumber (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ );
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber The root hub port to retrieve the state from.
+ @param PortStatus Variable to receive the port state.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified.
+ by PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcGetRootHubPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ );
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI
+ @param PortNumber Root hub port to set.
+ @param PortFeature Feature to set.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_TIMEOUT The time out occurred.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcSetRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
+ @param PortNumber Specifies the root hub port whose feature
+ is requested to be cleared.
+ @param PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+UhcClearRootHubPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+/**
+ Initialize UHCI.
+
+ @param UhcDev UHCI Device.
+
+ @retval EFI_SUCCESS UHCI successfully initialized.
+ @retval EFI_OUT_OF_RESOURCES Resource can not be allocated.
+
+**/
+EFI_STATUS
+InitializeUsbHC (
+ IN USB_UHC_DEV *UhcDev
+ );
+
+/**
+ Create Frame List Structure.
+
+ @param UhcDev UHCI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateFrameList (
+ USB_UHC_DEV *UhcDev
+ );
+
+/**
+ Read a 16bit width data from Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+
+ @retval the register content read.
+
+**/
+UINT16
+USBReadPortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port
+ );
+
+/**
+ Write a 16bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT16 Data
+ );
+
+/**
+ Write a 32bit width data into Uhc HC IO space register.
+
+ @param UhcDev The UHCI device.
+ @param Port The IO space address of the register.
+ @param Data The data written into the register.
+
+**/
+VOID
+USBWritePortDW (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Port,
+ IN UINT32 Data
+ );
+
+/**
+ Clear the content of UHCI's Status Register.
+
+ @param UhcDev The UHCI device.
+ @param StatusAddr The IO space address of the register.
+
+**/
+VOID
+ClearStatusReg (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusAddr
+ );
+
+/**
+ Check whether the host controller operates well.
+
+ @param UhcDev The UHCI device.
+ @param StatusRegAddr The io address of status register.
+
+ @retval TRUE Host controller is working.
+ @retval FALSE Host controller is halted or system error.
+
+**/
+BOOLEAN
+IsStatusOK (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 StatusRegAddr
+ );
+
+/**
+ Get Current Frame Number.
+
+ @param UhcDev The UHCI device.
+ @param FrameNumberAddr The address of frame list register.
+
+ @retval The content of the frame list register.
+
+**/
+UINT16
+GetCurrentFrameNumber (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameNumberAddr
+ );
+
+/**
+ Set Frame List Base Address.
+
+ @param UhcDev The UHCI device.
+ @param FrameListRegAddr The address of frame list register.
+ @param Addr The address of frame list table.
+
+**/
+VOID
+SetFrameListBaseAddress (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 FrameListRegAddr,
+ IN UINT32 Addr
+ );
+
+/**
+ Create QH and initialize.
+
+ @param UhcDev The UHCI device.
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateQH (
+ IN USB_UHC_DEV *UhcDev,
+ OUT QH_STRUCT **PtrQH
+ );
+
+/**
+ Set the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ );
+
+/**
+ Get the horizontal link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The horizontal link pointer in QH.
+
+**/
+VOID *
+GetQHHorizontalLinkPtr (
+ IN QH_STRUCT *PtrQH
+ );
+
+/**
+ Set a QH or TD horizontally to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHHorizontalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ );
+
+/**
+ Set the horizontal validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the horizontal linker is valid or not.
+
+**/
+VOID
+SetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ );
+
+/**
+ Set the vertical link pointer in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrNext Place to the next QH_STRUCT.
+
+**/
+VOID
+SetQHVerticalLinkPtr (
+ IN QH_STRUCT *PtrQH,
+ IN VOID *PtrNext
+ );
+
+/**
+ Set a QH or TD vertically to be connected with a specific QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetQHVerticalQHorTDSelect (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsQH
+ );
+
+/**
+ Set the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param IsValid Specify the vertical linker is valid or not.
+
+**/
+VOID
+SetQHVerticalValidorInvalid (
+ IN QH_STRUCT *PtrQH,
+ IN BOOLEAN IsValid
+ );
+
+/**
+ Get the vertical validor bit in QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+
+ @retval The vertical linker is valid or not.
+
+**/
+BOOLEAN
+GetQHHorizontalValidorInvalid (
+ IN QH_STRUCT *PtrQH
+ );
+
+/**
+ Allocate TD or QH Struct.
+
+ @param UhcDev The UHCI device.
+ @param Size The size of allocation.
+ @param PtrStruct Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+AllocateTDorQHStruct (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT32 Size,
+ OUT VOID **PtrStruct
+ );
+
+/**
+ Create a TD Struct.
+
+ @param UhcDev The UHCI device.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+ @return EFI_SUCCESS Allocate successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateTD (
+ IN USB_UHC_DEV *UhcDev,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Generate Setup Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param DeviceSpeed Device Speed.
+ @param DevRequest Device reuquest.
+ @param RequestLen Request length.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate setup stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenSetupStageTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 *DevRequest,
+ IN UINT8 RequestLen,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Generate Data Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PtrData Data buffer.
+ @param Len Data length.
+ @param PktID PacketID.
+ @param Toggle Data toggle value.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate data stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+GenDataTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 *PtrData,
+ IN UINT8 Len,
+ IN UINT8 PktID,
+ IN UINT8 Toggle,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Generate Status Stage TD.
+
+ @param UhcDev The UHCI device.
+ @param DevAddr Device address.
+ @param Endpoint Endpoint number.
+ @param PktID PacketID.
+ @param DeviceSpeed Device Speed.
+ @param PtrTD TD_STRUCT generated.
+
+ @return EFI_SUCCESS Generate status stage TD successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+
+**/
+EFI_STATUS
+CreateStatusTD (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 PktID,
+ IN UINT8 DeviceSpeed,
+ OUT TD_STRUCT **PtrTD
+ );
+
+/**
+ Set the link pointer validor bit in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsValid Specify the linker pointer is valid or not.
+
+**/
+VOID
+SetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsValid
+ );
+
+/**
+ Set the Link Pointer pointing to a QH or TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsQH Specify QH or TD is connected.
+
+**/
+VOID
+SetTDLinkPtrQHorTDSelect (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsQH
+ );
+
+/**
+ Set the traverse is depth-first or breadth-first.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsDepth Specify the traverse is depth-first or breadth-first.
+
+**/
+VOID
+SetTDLinkPtrDepthorBreadth (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsDepth
+ );
+
+/**
+ Set TD Link Pointer in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PtrNext Place to the next TD_STRUCT.
+
+**/
+VOID
+SetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct,
+ IN VOID *PtrNext
+ );
+
+/**
+ Get TD Link Pointer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval Get TD Link Pointer in TD.
+
+**/
+VOID*
+GetTDLinkPtr (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Get the information about whether the Link Pointer field pointing to
+ a QH or a TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval whether the Link Pointer field pointing to a QH or a TD.
+
+**/
+BOOLEAN
+IsTDLinkPtrQHOrTD (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Enable/Disable short packet detection mechanism.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsEnable Enable or disable short packet detection mechanism.
+
+**/
+VOID
+EnableorDisableTDShortPacket (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsEnable
+ );
+
+/**
+ Set the max error counter in TD.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxErrors The number of allowable error.
+
+**/
+VOID
+SetTDControlErrorCounter (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 MaxErrors
+ );
+
+/**
+ Set the TD is targeting a low-speed device or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsLowSpeedDevice Whether The device is low-speed.
+
+**/
+VOID
+SetTDLoworFullSpeedDevice (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsLowSpeedDevice
+ );
+
+/**
+ Set the TD is isochronous transfer type or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsIsochronous Whether the transaction isochronous transfer type.
+
+**/
+VOID
+SetTDControlIsochronousorNot (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsIsochronous
+ );
+
+/**
+ Set if UCHI should issue an interrupt on completion of the frame
+ in which this TD is executed
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsSet Whether HC should issue an interrupt on completion.
+
+**/
+VOID
+SetorClearTDControlIOC (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsSet
+ );
+
+/**
+ Set if the TD is active and can be executed.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param IsActive Whether the TD is active and can be executed.
+
+**/
+VOID
+SetTDStatusActiveorInactive (
+ IN TD_STRUCT *PtrTDStruct,
+ IN BOOLEAN IsActive
+ );
+
+/**
+ Specifies the maximum number of data bytes allowed for the transfer.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param MaxLen The maximum number of data bytes allowed.
+
+ @retval The allowed maximum number of data.
+**/
+UINT16
+SetTDTokenMaxLength (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT16 MaxLen
+ );
+
+/**
+ Set the data toggle bit to DATA1.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle1 (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Set the data toggle bit to DATA0.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDTokenDataToggle0 (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Set EndPoint Number the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param EndPoint The Endport number of the target.
+
+**/
+VOID
+SetTDTokenEndPoint (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN EndPoint
+ );
+
+/**
+ Set Device Address the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param DevAddr The Device Address of the target.
+
+**/
+VOID
+SetTDTokenDeviceAddress (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINTN DevAddr
+ );
+
+/**
+ Set Packet Identification the TD is targeting at.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+ @param PacketID The Packet Identification of the target.
+
+**/
+VOID
+SetTDTokenPacketID (
+ IN TD_STRUCT *PtrTDStruct,
+ IN UINT8 PacketID
+ );
+
+/**
+ Set the beginning address of the data buffer that will be used
+ during the transaction.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+**/
+VOID
+SetTDDataBuffer (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether the TD is active.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is active or not.
+
+**/
+BOOLEAN
+IsTDStatusActive (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether the TD is stalled.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The TD is stalled or not.
+
+**/
+BOOLEAN
+IsTDStatusStalled (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether Data Buffer Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Data Buffer Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBufferError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether Babble Error is happened.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Babble Error is happened or not.
+
+**/
+BOOLEAN
+IsTDStatusBabbleError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether NAK is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The NAK is received or not.
+
+**/
+BOOLEAN
+IsTDStatusNAKReceived (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether CRC/Time Out Error is encountered.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The CRC/Time Out Error is encountered or not.
+
+**/
+BOOLEAN
+IsTDStatusCRCTimeOutError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Detect whether Bitstuff Error is received.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The Bitstuff Error is received or not.
+
+**/
+BOOLEAN
+IsTDStatusBitStuffError (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Retrieve the actual number of bytes that were tansferred.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The actual number of bytes that were tansferred.
+
+**/
+UINT16
+GetTDStatusActualLength (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Retrieve the information of whether the Link Pointer field is valid or not.
+
+ @param PtrTDStruct Place to store TD_STRUCT pointer.
+
+ @retval The linker pointer field is valid or not.
+
+**/
+BOOLEAN
+GetTDLinkPtrValidorInvalid (
+ IN TD_STRUCT *PtrTDStruct
+ );
+
+/**
+ Count TD Number from PtrFirstTD.
+
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+ @retval The queued TDs number.
+
+**/
+UINTN
+CountTDsNumber (
+ IN TD_STRUCT *PtrFirstTD
+ );
+
+/**
+ Link TD To QH.
+
+ @param PtrQH Place to store QH_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToQH (
+ IN QH_STRUCT *PtrQH,
+ IN TD_STRUCT *PtrTD
+ );
+
+/**
+ Link TD To TD.
+
+ @param PtrPreTD Place to store TD_STRUCT pointer.
+ @param PtrTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+LinkTDToTD (
+ IN TD_STRUCT *PtrPreTD,
+ IN TD_STRUCT *PtrTD
+ );
+
+/**
+ Execute Control Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecuteControlTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ OUT UINTN *ActualLen,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Execute Bulk Transfer.
+
+ @param UhcDev The UCHI device.
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param ActualLen Actual transfer Length.
+ @param DataToggle DataToggle value.
+ @param TimeOut TimeOut value.
+ @param TransferResult Transfer Result.
+
+ @return EFI_DEVICE_ERROR The transfer failed due to transfer error.
+ @return EFI_TIMEOUT The transfer failed due to time out.
+ @return EFI_SUCCESS The transfer finished OK.
+
+**/
+EFI_STATUS
+ExecBulkTransfer (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrTD,
+ IN OUT UINTN *ActualLen,
+ IN UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Delete Queued TDs.
+
+ @param UhcDev The UCHI device.
+ @param PtrFirstTD Place to store TD_STRUCT pointer.
+
+**/
+VOID
+DeleteQueuedTDs (
+ IN USB_UHC_DEV *UhcDev,
+ IN TD_STRUCT *PtrFirstTD
+ );
+
+/**
+ Check TDs Results.
+
+ @param PtrTD A pointer to TD_STRUCT data.
+ @param Result The result to return.
+ @param ErrTDPos The Error TD position.
+ @param ActualTransferSize Actual transfer size.
+
+ @retval The TD is executed successfully or not.
+
+**/
+BOOLEAN
+CheckTDsResults (
+ IN TD_STRUCT *PtrTD,
+ OUT UINT32 *Result,
+ OUT UINTN *ErrTDPos,
+ OUT UINTN *ActualTransferSize
+ );
+
+/**
+ Create Memory Block.
+
+ @param UhcDev The UCHI device.
+ @param MemoryHeader The Pointer to allocated memory block.
+ @param MemoryBlockSizeInPages The page size of memory block to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+CreateMemoryBlock (
+ IN USB_UHC_DEV *UhcDev,
+ OUT MEMORY_MANAGE_HEADER **MemoryHeader,
+ IN UINTN MemoryBlockSizeInPages
+ );
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+InitializeMemoryManagement (
+ IN USB_UHC_DEV *UhcDev
+ );
+
+/**
+ Initialize UHCI memory management.
+
+ @param UhcDev The UCHI device.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param AllocSize The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+UhcAllocatePool (
+ IN USB_UHC_DEV *UhcDev,
+ OUT UINT8 **Pool,
+ IN UINTN AllocSize
+ );
+
+/**
+ Alloc Memory In MemoryBlock.
+
+ @param MemoryHeader The pointer to memory manage header.
+ @param Pool Buffer pointer to store the buffer pointer.
+ @param NumberOfMemoryUnit The size of the pool to be allocated.
+
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.
+ @retval EFI_SUCCESS Success.
+
+**/
+EFI_STATUS
+AllocMemInMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ OUT VOID **Pool,
+ IN UINTN NumberOfMemoryUnit
+ );
+
+/**
+ Uhci Free Pool.
+
+ @param UhcDev The UHCI device.
+ @param Pool A pointer to store the buffer address.
+ @param AllocSize The size of the pool to be freed.
+
+**/
+VOID
+UhcFreePool (
+ IN USB_UHC_DEV *UhcDev,
+ IN UINT8 *Pool,
+ IN UINTN AllocSize
+ );
+
+/**
+ Insert a new memory header into list.
+
+ @param MemoryHeader A pointer to the memory header list.
+ @param NewMemoryHeader A new memory header to be inserted into the list.
+
+**/
+VOID
+InsertMemoryHeaderToList (
+ IN MEMORY_MANAGE_HEADER *MemoryHeader,
+ IN MEMORY_MANAGE_HEADER *NewMemoryHeader
+ );
+
+/**
+ Judge the memory block in the memory header is empty or not.
+
+ @param MemoryHeaderPtr A pointer to the memory header list.
+
+ @retval Whether the memory block in the memory header is empty or not.
+
+**/
+BOOLEAN
+IsMemoryBlockEmptied (
+ IN MEMORY_MANAGE_HEADER *MemoryHeaderPtr
+ );
+
+/**
+ remove a memory header from list.
+
+ @param FirstMemoryHeader A pointer to the memory header list.
+ @param FreeMemoryHeader A memory header to be removed into the list.
+
+**/
+VOID
+DelinkMemoryBlock (
+ IN MEMORY_MANAGE_HEADER *FirstMemoryHeader,
+ IN MEMORY_MANAGE_HEADER *FreeMemoryHeader
+ );
+
+#endif
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf b/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf new file mode 100644 index 0000000000..cf91ebcac6 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf @@ -0,0 +1,62 @@ +## @file
+# Component description file for UhcPeim PEIM to produce gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid
+# which is used to enable recovery function from USB Drivers.
+
+#
+# Usb Host Controller PEIM to support recovery from USB device.
+# Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions
+# of the BSD License which accompanies this distribution. The
+# full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = UhciPei
+ FILE_GUID = C463CEAC-FC57-4f36-88B7-356C750C3BCA
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = UhcPeimEntry
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ UhcPeim.c
+ UhcPeim.h
+
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+
+[LibraryClasses]
+ IoLib
+ TimerLib
+ BaseMemoryLib
+ PeiServicesLib
+ PeimEntryPoint
+ DebugLib
+
+
+[Ppis]
+ gPeiUsbHostControllerPpiGuid # PPI ALWAYS_PRODUCED
+ gPeiUsbControllerPpiGuid # PPI ALWAYS_CONSUMED
+
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbControllerPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid
+
+
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c new file mode 100644 index 0000000000..55c4a537fa --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c @@ -0,0 +1,401 @@ +/** @file
+BOT Transportation implementation.
+
+Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbBotPeim.h"
+#include "BotPeim.h"
+#include "PeiUsbLib.h"
+
+/**
+ Reset the given usb device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDev The instance to PEI_BOT_DEVICE.
+
+ @retval EFI_INVALID_PARAMETER Can not get usb io ppi.
+ @retval EFI_SUCCESS Failed to reset the given usb device.
+
+**/
+EFI_STATUS
+BotRecoveryReset (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+ UINT32 Timeout;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ UINT8 EndpointAddr;
+ EFI_STATUS Status;
+
+ UsbIoPpi = PeiBotDev->UsbIoPpi;
+
+ if (UsbIoPpi == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (&DevReq, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ DevReq.RequestType = 0x21;
+ DevReq.Request = 0xFF;
+ DevReq.Value = 0;
+ DevReq.Index = 0;
+ DevReq.Length = 0;
+
+ Timeout = 3000;
+
+ Status = UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ Timeout,
+ NULL,
+ 0
+ );
+
+ //
+ // clear bulk in endpoint stall feature
+ //
+ EndpointAddr = (PeiBotDev->BulkInEndpoint)->EndpointAddress;
+ PeiUsbClearEndpointHalt (PeiServices, UsbIoPpi, EndpointAddr);
+
+ //
+ // clear bulk out endpoint stall feature
+ //
+ EndpointAddr = (PeiBotDev->BulkOutEndpoint)->EndpointAddress;
+ PeiUsbClearEndpointHalt (PeiServices, UsbIoPpi, EndpointAddr);
+
+ return Status;
+}
+
+/**
+ Send the command to the device using Bulk-Out endpoint.
+
+ This function sends the command to the device using Bulk-Out endpoint.
+ BOT transfer is composed of three phases: Command, Data, and Status.
+ This is the Command phase.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDev The instance to PEI_BOT_DEVICE.
+ @param Command The command to transfer to device.
+ @param CommandSize The length of the command.
+ @param DataTransferLength The expected length of the data.
+ @param Direction The direction of the data.
+ @param Timeout Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_DEVICE_ERROR Successful to send the command to device.
+ @retval EFI_SUCCESS Failed to send the command to device.
+
+**/
+EFI_STATUS
+BotCommandPhase (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev,
+ IN VOID *Command,
+ IN UINT8 CommandSize,
+ IN UINT32 DataTransferLength,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT16 Timeout
+ )
+{
+ CBW Cbw;
+ EFI_STATUS Status;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ UINTN DataSize;
+
+ UsbIoPpi = PeiBotDev->UsbIoPpi;
+
+ ZeroMem (&Cbw, sizeof (CBW));
+
+ //
+ // Fill the command block, detailed see BOT spec
+ //
+ Cbw.Signature = CBWSIG;
+ Cbw.Tag = 0x01;
+ Cbw.DataTransferLength = DataTransferLength;
+ Cbw.Flags = (UINT8) ((Direction == EfiUsbDataIn) ? 0x80 : 0);
+ Cbw.Lun = 0;
+ Cbw.CmdLen = CommandSize;
+
+ CopyMem (Cbw.CmdBlock, Command, CommandSize);
+
+ DataSize = sizeof (CBW);
+
+ Status = UsbIoPpi->UsbBulkTransfer (
+ PeiServices,
+ UsbIoPpi,
+ (PeiBotDev->BulkOutEndpoint)->EndpointAddress,
+ (UINT8 *) &Cbw,
+ &DataSize,
+ Timeout
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // Command phase fail, we need to recovery reset this device
+ //
+ BotRecoveryReset (PeiServices, PeiBotDev);
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Transfer the data between the device and host.
+
+ This function transfers the data between the device and host.
+ BOT transfer is composed of three phases: Command, Data, and Status.
+ This is the Data phase.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDev The instance to PEI_BOT_DEVICE.
+ @param DataSize The length of the data.
+ @param DataBuffer The pointer to the data.
+ @param Direction The direction of the data.
+ @param Timeout Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_DEVICE_ERROR Successful to send the data to device.
+ @retval EFI_SUCCESS Failed to send the data to device.
+
+**/
+EFI_STATUS
+BotDataPhase (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev,
+ IN UINT32 *DataSize,
+ IN OUT VOID *DataBuffer,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT16 Timeout
+ )
+{
+ EFI_STATUS Status;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ UINT8 EndpointAddr;
+ UINTN Remain;
+ UINTN Increment;
+ UINT32 MaxPacketLen;
+ UINT8 *BufferPtr;
+ UINTN TransferredSize;
+
+ UsbIoPpi = PeiBotDev->UsbIoPpi;
+
+ Remain = *DataSize;
+ BufferPtr = (UINT8 *) DataBuffer;
+ TransferredSize = 0;
+
+ //
+ // retrieve the the max packet length of the given endpoint
+ //
+ if (Direction == EfiUsbDataIn) {
+ MaxPacketLen = (PeiBotDev->BulkInEndpoint)->MaxPacketSize;
+ EndpointAddr = (PeiBotDev->BulkInEndpoint)->EndpointAddress;
+ } else {
+ MaxPacketLen = (PeiBotDev->BulkOutEndpoint)->MaxPacketSize;
+ EndpointAddr = (PeiBotDev->BulkOutEndpoint)->EndpointAddress;
+ }
+
+ while (Remain > 0) {
+ //
+ // Using 15 packets to avoid Bitstuff error
+ //
+ if (Remain > 16 * MaxPacketLen) {
+ Increment = 16 * MaxPacketLen;
+ } else {
+ Increment = Remain;
+ }
+
+ Status = UsbIoPpi->UsbBulkTransfer (
+ PeiServices,
+ UsbIoPpi,
+ EndpointAddr,
+ BufferPtr,
+ &Increment,
+ Timeout
+ );
+
+ TransferredSize += Increment;
+
+ if (EFI_ERROR (Status)) {
+ PeiUsbClearEndpointHalt (PeiServices, UsbIoPpi, EndpointAddr);
+ return Status;
+ }
+
+ BufferPtr += Increment;
+ Remain -= Increment;
+ }
+
+ *DataSize = (UINT32) TransferredSize;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Get the command execution status from device.
+
+ This function gets the command execution status from device.
+ BOT transfer is composed of three phases: Command, Data, and Status.
+ This is the Status phase.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDev The instance to PEI_BOT_DEVICE.
+ @param TransferStatus The status of the transaction.
+ @param Timeout Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_DEVICE_ERROR Successful to get the status of device.
+ @retval EFI_SUCCESS Failed to get the status of device.
+
+**/
+EFI_STATUS
+BotStatusPhase (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev,
+ OUT UINT8 *TransferStatus,
+ IN UINT16 Timeout
+ )
+{
+ CSW Csw;
+ EFI_STATUS Status;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ UINT8 EndpointAddr;
+ UINTN DataSize;
+
+ UsbIoPpi = PeiBotDev->UsbIoPpi;
+
+ ZeroMem (&Csw, sizeof (CSW));
+
+ EndpointAddr = (PeiBotDev->BulkInEndpoint)->EndpointAddress;
+
+ DataSize = sizeof (CSW);
+
+ //
+ // Get the status field from bulk transfer
+ //
+ Status = UsbIoPpi->UsbBulkTransfer (
+ PeiServices,
+ UsbIoPpi,
+ EndpointAddr,
+ &Csw,
+ &DataSize,
+ Timeout
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Csw.Signature == CSWSIG) {
+ *TransferStatus = Csw.Status;
+ } else {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Send ATAPI command using BOT protocol.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDev The instance to PEI_BOT_DEVICE.
+ @param Command The command to be sent to ATAPI device.
+ @param CommandSize The length of the data to be sent.
+ @param DataBuffer The pointer to the data.
+ @param BufferLength The length of the data.
+ @param Direction The direction of the data.
+ @param TimeOutInMilliSeconds Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_DEVICE_ERROR Successful to get the status of device.
+ @retval EFI_SUCCESS Failed to get the status of device.
+
+**/
+EFI_STATUS
+PeiAtapiCommand (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev,
+ IN VOID *Command,
+ IN UINT8 CommandSize,
+ IN VOID *DataBuffer,
+ IN UINT32 BufferLength,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT16 TimeOutInMilliSeconds
+ )
+{
+ EFI_STATUS Status;
+ EFI_STATUS BotDataStatus;
+ UINT8 TransferStatus;
+ UINT32 BufferSize;
+
+ BotDataStatus = EFI_SUCCESS;
+ //
+ // First send ATAPI command through Bot
+ //
+ Status = BotCommandPhase (
+ PeiServices,
+ PeiBotDev,
+ Command,
+ CommandSize,
+ BufferLength,
+ Direction,
+ TimeOutInMilliSeconds
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+ //
+ // Send/Get Data if there is a Data Stage
+ //
+ switch (Direction) {
+ case EfiUsbDataIn:
+ case EfiUsbDataOut:
+ BufferSize = BufferLength;
+
+ BotDataStatus = BotDataPhase (
+ PeiServices,
+ PeiBotDev,
+ &BufferSize,
+ DataBuffer,
+ Direction,
+ TimeOutInMilliSeconds
+ );
+ break;
+
+ case EfiUsbNoData:
+ break;
+ }
+ //
+ // Status Phase
+ //
+ Status = BotStatusPhase (
+ PeiServices,
+ PeiBotDev,
+ &TransferStatus,
+ TimeOutInMilliSeconds
+ );
+ if (EFI_ERROR (Status)) {
+ BotRecoveryReset (PeiServices, PeiBotDev);
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (TransferStatus == 0x01) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return BotDataStatus;
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h new file mode 100644 index 0000000000..07235c397b --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h @@ -0,0 +1,224 @@ +/** @file
+BOT Transportation implementation.
+
+Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_BOT_PEIM_H_
+#define _PEI_BOT_PEIM_H_
+
+
+#include <PiPei.h>
+
+#include <Ppi/UsbIo.h>
+#include <Ppi/UsbHostController.h>
+#include <Ppi/BlockIo.h>
+
+//#include <Library/DebugLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/BaseMemoryLib.h>
+
+#include <IndustryStandard/Atapi.h>
+
+#pragma pack(1)
+//
+// Bulk Only device protocol
+//
+typedef struct {
+ UINT32 Signature;
+ UINT32 Tag;
+ UINT32 DataTransferLength;
+ UINT8 Flags;
+ UINT8 Lun;
+ UINT8 CmdLen;
+ UINT8 CmdBlock[16];
+} CBW;
+
+typedef struct {
+ UINT32 Signature;
+ UINT32 Tag;
+ UINT32 DataResidue;
+ UINT8 Status;
+} CSW;
+
+#pragma pack()
+//
+// Status code, see Usb Bot device spec
+//
+#define CSWSIG 0x53425355
+#define CBWSIG 0x43425355
+
+/**
+ Sends out ATAPI Inquiry Packet Command to the specified device. This command will
+ return INQUIRY data of the device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS Inquiry command completes successfully.
+ @retval EFI_DEVICE_ERROR Inquiry command failed.
+
+**/
+EFI_STATUS
+PeiUsbInquiry (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ );
+
+/**
+ Sends out ATAPI Test Unit Ready Packet Command to the specified device
+ to find out whether device is accessible.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS TestUnit command executed successfully.
+ @retval EFI_DEVICE_ERROR Device cannot be executed TestUnit command successfully.
+
+**/
+EFI_STATUS
+PeiUsbTestUnitReady (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ );
+
+/**
+ Sends out ATAPI Request Sense Packet Command to the specified device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+ @param SenseCounts Length of sense buffer.
+ @param SenseKeyBuffer Pointer to sense buffer.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbRequestSense (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice,
+ OUT UINTN *SenseCounts,
+ IN UINT8 *SenseKeyBuffer
+ );
+
+/**
+ Sends out ATAPI Read Capacity Packet Command to the specified device.
+ This command will return the information regarding the capacity of the
+ media in the device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbReadCapacity (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ );
+
+/**
+ Sends out ATAPI Read Format Capacity Data Command to the specified device.
+ This command will return the information regarding the capacity of the
+ media in the device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbReadFormattedCapacity (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ );
+
+/**
+ Execute Read(10) ATAPI command on a specific SCSI target.
+
+ Executes the ATAPI Read(10) command on the ATAPI target specified by PeiBotDevice.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+ @param Buffer The pointer to data buffer.
+ @param Lba The start logic block address of reading.
+ @param NumberOfBlocks The block number of reading.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbRead10 (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice,
+ IN VOID *Buffer,
+ IN EFI_PEI_LBA Lba,
+ IN UINTN NumberOfBlocks
+ );
+
+/**
+ Check if there is media according to sense data.
+
+ @param SenseData Pointer to sense data.
+ @param SenseCounts Count of sense data.
+
+ @retval TRUE No media
+ @retval FALSE Media exists
+
+**/
+BOOLEAN
+IsNoMedia (
+ IN ATAPI_REQUEST_SENSE_DATA *SenseData,
+ IN UINTN SenseCounts
+ );
+
+/**
+ Check if there is media error according to sense data.
+
+ @param SenseData Pointer to sense data.
+ @param SenseCounts Count of sense data.
+
+ @retval TRUE Media error
+ @retval FALSE No media error
+
+**/
+BOOLEAN
+IsMediaError (
+ IN ATAPI_REQUEST_SENSE_DATA *SenseData,
+ IN UINTN SenseCounts
+ );
+
+/**
+ Check if media is changed according to sense data.
+
+ @param SenseData Pointer to sense data.
+ @param SenseCounts Count of sense data.
+
+ @retval TRUE There is media change event.
+ @retval FALSE media is NOT changed.
+
+**/
+BOOLEAN
+IsMediaChange (
+ IN ATAPI_REQUEST_SENSE_DATA *SenseData,
+ IN UINTN SenseCounts
+ );
+
+#endif
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c new file mode 100644 index 0000000000..28574d07e1 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c @@ -0,0 +1,630 @@ +/** @file
+Pei USB ATATPI command implementations.
+
+Copyright (c) 1999 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbBotPeim.h"
+#include "BotPeim.h"
+
+#define MAXSENSEKEY 5
+
+/**
+ Sends out ATAPI Inquiry Packet Command to the specified device. This command will
+ return INQUIRY data of the device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS Inquiry command completes successfully.
+ @retval EFI_DEVICE_ERROR Inquiry command failed.
+
+**/
+EFI_STATUS
+PeiUsbInquiry (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ )
+{
+ ATAPI_PACKET_COMMAND Packet;
+ EFI_STATUS Status;
+ ATAPI_INQUIRY_DATA Idata;
+
+ //
+ // fill command packet
+ //
+ ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
+ ZeroMem (&Idata, sizeof (ATAPI_INQUIRY_DATA));
+
+ Packet.Inquiry.opcode = ATA_CMD_INQUIRY;
+ Packet.Inquiry.page_code = 0;
+ Packet.Inquiry.allocation_length = 36;
+
+ //
+ // Send scsi INQUIRY command packet.
+ // According to SCSI Primary Commands-2 spec, host only needs to
+ // retrieve the first 36 bytes for standard INQUIRY data.
+ //
+ Status = PeiAtapiCommand (
+ PeiServices,
+ PeiBotDevice,
+ &Packet,
+ (UINT8) sizeof (ATAPI_PACKET_COMMAND),
+ &Idata,
+ 36,
+ EfiUsbDataIn,
+ 2000
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((Idata.peripheral_type & 0x1f) == 0x05) {
+ PeiBotDevice->DeviceType = USBCDROM;
+ PeiBotDevice->Media.BlockSize = 0x800;
+ } else {
+ PeiBotDevice->DeviceType = USBFLOPPY;
+ PeiBotDevice->Media.BlockSize = 0x200;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sends out ATAPI Test Unit Ready Packet Command to the specified device
+ to find out whether device is accessible.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS TestUnit command executed successfully.
+ @retval EFI_DEVICE_ERROR Device cannot be executed TestUnit command successfully.
+
+**/
+EFI_STATUS
+PeiUsbTestUnitReady (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ )
+{
+ ATAPI_PACKET_COMMAND Packet;
+ EFI_STATUS Status;
+
+ //
+ // fill command packet
+ //
+ ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
+ Packet.TestUnitReady.opcode = ATA_CMD_TEST_UNIT_READY;
+
+ //
+ // send command packet
+ //
+ Status = PeiAtapiCommand (
+ PeiServices,
+ PeiBotDevice,
+ &Packet,
+ (UINT8) sizeof (ATAPI_PACKET_COMMAND),
+ NULL,
+ 0,
+ EfiUsbNoData,
+ 2000
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sends out ATAPI Request Sense Packet Command to the specified device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+ @param SenseCounts Length of sense buffer.
+ @param SenseKeyBuffer Pointer to sense buffer.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbRequestSense (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice,
+ OUT UINTN *SenseCounts,
+ IN UINT8 *SenseKeyBuffer
+ )
+{
+ EFI_STATUS Status;
+ ATAPI_PACKET_COMMAND Packet;
+ UINT8 *Ptr;
+ BOOLEAN SenseReq;
+ ATAPI_REQUEST_SENSE_DATA *Sense;
+
+ *SenseCounts = 0;
+
+ //
+ // fill command packet for Request Sense Packet Command
+ //
+ ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
+ Packet.RequestSence.opcode = ATA_CMD_REQUEST_SENSE;
+ Packet.RequestSence.allocation_length = (UINT8) sizeof (ATAPI_REQUEST_SENSE_DATA);
+
+ Ptr = SenseKeyBuffer;
+
+ SenseReq = TRUE;
+
+ //
+ // request sense data from device continuously
+ // until no sense data exists in the device.
+ //
+ while (SenseReq) {
+ Sense = (ATAPI_REQUEST_SENSE_DATA *) Ptr;
+
+ //
+ // send out Request Sense Packet Command and get one Sense
+ // data form device.
+ //
+ Status = PeiAtapiCommand (
+ PeiServices,
+ PeiBotDevice,
+ &Packet,
+ (UINT8) sizeof (ATAPI_PACKET_COMMAND),
+ (VOID *) Ptr,
+ sizeof (ATAPI_REQUEST_SENSE_DATA),
+ EfiUsbDataIn,
+ 2000
+ );
+
+ //
+ // failed to get Sense data
+ //
+ if (EFI_ERROR (Status)) {
+ if (*SenseCounts == 0) {
+ return EFI_DEVICE_ERROR;
+ } else {
+ return EFI_SUCCESS;
+ }
+ }
+
+ if (Sense->sense_key != ATA_SK_NO_SENSE) {
+
+ Ptr += sizeof (ATAPI_REQUEST_SENSE_DATA);
+ //
+ // Ptr is byte based pointer
+ //
+ (*SenseCounts)++;
+
+ if (*SenseCounts == MAXSENSEKEY) {
+ break;
+ }
+
+ } else {
+ //
+ // when no sense key, skip out the loop
+ //
+ SenseReq = FALSE;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sends out ATAPI Read Capacity Packet Command to the specified device.
+ This command will return the information regarding the capacity of the
+ media in the device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbReadCapacity (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ )
+{
+ EFI_STATUS Status;
+ ATAPI_PACKET_COMMAND Packet;
+ ATAPI_READ_CAPACITY_DATA Data;
+
+ ZeroMem (&Data, sizeof (ATAPI_READ_CAPACITY_DATA));
+ ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
+
+ Packet.Inquiry.opcode = ATA_CMD_READ_CAPACITY;
+
+ //
+ // send command packet
+ //
+ Status = PeiAtapiCommand (
+ PeiServices,
+ PeiBotDevice,
+ &Packet,
+ (UINT8) sizeof (ATAPI_PACKET_COMMAND),
+ (VOID *) &Data,
+ sizeof (ATAPI_READ_CAPACITY_DATA),
+ EfiUsbDataIn,
+ 2000
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ PeiBotDevice->Media.LastBlock = (Data.LastLba3 << 24) | (Data.LastLba2 << 16) | (Data.LastLba1 << 8) | Data.LastLba0;
+
+ PeiBotDevice->Media.MediaPresent = TRUE;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sends out ATAPI Read Format Capacity Data Command to the specified device.
+ This command will return the information regarding the capacity of the
+ media in the device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbReadFormattedCapacity (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice
+ )
+{
+ EFI_STATUS Status;
+ ATAPI_PACKET_COMMAND Packet;
+ ATAPI_READ_FORMAT_CAPACITY_DATA FormatData;
+
+ ZeroMem (&FormatData, sizeof (ATAPI_READ_FORMAT_CAPACITY_DATA));
+ ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
+
+ Packet.ReadFormatCapacity.opcode = ATA_CMD_READ_FORMAT_CAPACITY;
+ Packet.ReadFormatCapacity.allocation_length_lo = 12;
+
+ //
+ // send command packet
+ //
+ Status = PeiAtapiCommand (
+ PeiServices,
+ PeiBotDevice,
+ &Packet,
+ (UINT8) sizeof (ATAPI_PACKET_COMMAND),
+ (VOID *) &FormatData,
+ sizeof (ATAPI_READ_FORMAT_CAPACITY_DATA),
+ EfiUsbDataIn,
+ 2000
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (FormatData.DesCode == 3) {
+ //
+ // Media is not present
+ //
+ PeiBotDevice->Media.MediaPresent = FALSE;
+ PeiBotDevice->Media.LastBlock = 0;
+
+ } else {
+
+ PeiBotDevice->Media.LastBlock = (FormatData.LastLba3 << 24) | (FormatData.LastLba2 << 16) | (FormatData.LastLba1 << 8) | FormatData.LastLba0;
+
+ PeiBotDevice->Media.LastBlock--;
+
+ PeiBotDevice->Media.MediaPresent = TRUE;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Execute Read(10) ATAPI command on a specific SCSI target.
+
+ Executes the ATAPI Read(10) command on the ATAPI target specified by PeiBotDevice.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDevice The pointer to PEI_BOT_DEVICE instance.
+ @param Buffer The pointer to data buffer.
+ @param Lba The start logic block address of reading.
+ @param NumberOfBlocks The block number of reading.
+
+ @retval EFI_SUCCESS Command executed successfully.
+ @retval EFI_DEVICE_ERROR Some device errors happen.
+
+**/
+EFI_STATUS
+PeiUsbRead10 (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDevice,
+ IN VOID *Buffer,
+ IN EFI_PEI_LBA Lba,
+ IN UINTN NumberOfBlocks
+ )
+{
+ ATAPI_PACKET_COMMAND Packet;
+ ATAPI_READ10_CMD *Read10Packet;
+ UINT16 MaxBlock;
+ UINT16 BlocksRemaining;
+ UINT16 SectorCount;
+ UINT32 Lba32;
+ UINT32 BlockSize;
+ UINT32 ByteCount;
+ VOID *PtrBuffer;
+ EFI_STATUS Status;
+ UINT16 TimeOut;
+
+ //
+ // prepare command packet for the Inquiry Packet Command.
+ //
+ ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
+ Read10Packet = &Packet.Read10;
+ Lba32 = (UINT32) Lba;
+ PtrBuffer = Buffer;
+
+ BlockSize = (UINT32) PeiBotDevice->Media.BlockSize;
+
+ MaxBlock = (UINT16) (65535 / BlockSize);
+ BlocksRemaining = (UINT16) NumberOfBlocks;
+
+ Status = EFI_SUCCESS;
+ while (BlocksRemaining > 0) {
+
+ if (BlocksRemaining <= MaxBlock) {
+
+ SectorCount = BlocksRemaining;
+
+ } else {
+
+ SectorCount = MaxBlock;
+ }
+ //
+ // fill the Packet data structure
+ //
+ Read10Packet->opcode = ATA_CMD_READ_10;
+
+ //
+ // Lba0 ~ Lba3 specify the start logical block address of the data transfer.
+ // Lba0 is MSB, Lba3 is LSB
+ //
+ Read10Packet->Lba3 = (UINT8) (Lba32 & 0xff);
+ Read10Packet->Lba2 = (UINT8) (Lba32 >> 8);
+ Read10Packet->Lba1 = (UINT8) (Lba32 >> 16);
+ Read10Packet->Lba0 = (UINT8) (Lba32 >> 24);
+
+ //
+ // TranLen0 ~ TranLen1 specify the transfer length in block unit.
+ // TranLen0 is MSB, TranLen is LSB
+ //
+ Read10Packet->TranLen1 = (UINT8) (SectorCount & 0xff);
+ Read10Packet->TranLen0 = (UINT8) (SectorCount >> 8);
+
+ ByteCount = SectorCount * BlockSize;
+
+ TimeOut = (UINT16) (SectorCount * 2000);
+
+ //
+ // send command packet
+ //
+ Status = PeiAtapiCommand (
+ PeiServices,
+ PeiBotDevice,
+ &Packet,
+ (UINT8) sizeof (ATAPI_PACKET_COMMAND),
+ (VOID *) PtrBuffer,
+ ByteCount,
+ EfiUsbDataIn,
+ TimeOut
+ );
+
+ if (Status != EFI_SUCCESS) {
+ return Status;
+ }
+
+ Lba32 += SectorCount;
+ PtrBuffer = (UINT8 *) PtrBuffer + SectorCount * BlockSize;
+ BlocksRemaining = (UINT16) (BlocksRemaining - SectorCount);
+ }
+
+ return Status;
+}
+
+/**
+ Check if there is media according to sense data.
+
+ @param SenseData Pointer to sense data.
+ @param SenseCounts Count of sense data.
+
+ @retval TRUE No media
+ @retval FALSE Media exists
+
+**/
+BOOLEAN
+IsNoMedia (
+ IN ATAPI_REQUEST_SENSE_DATA *SenseData,
+ IN UINTN SenseCounts
+ )
+{
+ ATAPI_REQUEST_SENSE_DATA *SensePtr;
+ UINTN Index;
+ BOOLEAN NoMedia;
+
+ NoMedia = FALSE;
+ SensePtr = SenseData;
+
+ for (Index = 0; Index < SenseCounts; Index++) {
+
+ switch (SensePtr->sense_key) {
+
+ case ATA_SK_NOT_READY:
+ switch (SensePtr->addnl_sense_code) {
+ //
+ // if no media, fill IdeDev parameter with specific info.
+ //
+ case ATA_ASC_NO_MEDIA:
+ NoMedia = TRUE;
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ SensePtr++;
+ }
+
+ return NoMedia;
+}
+
+/**
+ Check if there is media error according to sense data.
+
+ @param SenseData Pointer to sense data.
+ @param SenseCounts Count of sense data.
+
+ @retval TRUE Media error
+ @retval FALSE No media error
+
+**/
+BOOLEAN
+IsMediaError (
+ IN ATAPI_REQUEST_SENSE_DATA *SenseData,
+ IN UINTN SenseCounts
+ )
+{
+ ATAPI_REQUEST_SENSE_DATA *SensePtr;
+ UINTN Index;
+ BOOLEAN Error;
+
+ SensePtr = SenseData;
+ Error = FALSE;
+
+ for (Index = 0; Index < SenseCounts; Index++) {
+
+ switch (SensePtr->sense_key) {
+ //
+ // Medium error case
+ //
+ case ATA_SK_MEDIUM_ERROR:
+ switch (SensePtr->addnl_sense_code) {
+ case ATA_ASC_MEDIA_ERR1:
+ //
+ // fall through
+ //
+ case ATA_ASC_MEDIA_ERR2:
+ //
+ // fall through
+ //
+ case ATA_ASC_MEDIA_ERR3:
+ //
+ // fall through
+ //
+ case ATA_ASC_MEDIA_ERR4:
+ Error = TRUE;
+ break;
+
+ default:
+ break;
+ }
+
+ break;
+
+ //
+ // Medium upside-down case
+ //
+ case ATA_SK_NOT_READY:
+ switch (SensePtr->addnl_sense_code) {
+ case ATA_ASC_MEDIA_UPSIDE_DOWN:
+ Error = TRUE;
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ SensePtr++;
+ }
+
+ return Error;
+}
+
+/**
+ Check if media is changed according to sense data.
+
+ @param SenseData Pointer to sense data.
+ @param SenseCounts Count of sense data.
+
+ @retval TRUE There is media change event.
+ @retval FALSE media is NOT changed.
+
+**/
+BOOLEAN
+IsMediaChange (
+ IN ATAPI_REQUEST_SENSE_DATA *SenseData,
+ IN UINTN SenseCounts
+ )
+{
+ ATAPI_REQUEST_SENSE_DATA *SensePtr;
+ UINTN Index;
+ BOOLEAN MediaChange;
+
+ MediaChange = FALSE;
+
+ SensePtr = SenseData;
+
+ for (Index = 0; Index < SenseCounts; Index++) {
+ //
+ // catch media change sense key and addition sense data
+ //
+ switch (SensePtr->sense_key) {
+ case ATA_SK_UNIT_ATTENTION:
+ switch (SensePtr->addnl_sense_code) {
+ case ATA_ASC_MEDIA_CHANGE:
+ MediaChange = TRUE;
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ SensePtr++;
+ }
+
+ return MediaChange;
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c new file mode 100644 index 0000000000..2a8fde07ff --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c @@ -0,0 +1,331 @@ +/** @file
+Common Libarary for PEI USB.
+
+Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbPeim.h"
+#include "PeiUsbLib.h"
+
+/**
+ Get a given usb descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value Request Value.
+ @param Index Request Index.
+ @param DescriptorLength Request descriptor Length.
+ @param Descriptor Request descriptor.
+
+
+ @retval EFI_SUCCESS Usb descriptor is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the usb descriptor due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbGetDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 Value,
+ IN UINT16 Index,
+ IN UINT16 DescriptorLength,
+ OUT VOID *Descriptor
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+
+ ASSERT (UsbIoPpi != NULL);
+
+ DevReq.RequestType = USB_DEV_GET_DESCRIPTOR_REQ_TYPE;
+ DevReq.Request = USB_DEV_GET_DESCRIPTOR;
+ DevReq.Value = Value;
+ DevReq.Index = Index;
+ DevReq.Length = DescriptorLength;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbDataIn,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ Descriptor,
+ DescriptorLength
+ );
+}
+
+/**
+ Set a usb device with a specified address.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param AddressValue The address to assign.
+
+ @retval EFI_SUCCESS Usb device address is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb address due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetDeviceAddress (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 AddressValue
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+
+ ASSERT (UsbIoPpi != NULL);
+
+ DevReq.RequestType = USB_DEV_SET_ADDRESS_REQ_TYPE;
+ DevReq.Request = USB_DEV_SET_ADDRESS;
+ DevReq.Value = AddressValue;
+ DevReq.Index = 0;
+ DevReq.Length = 0;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Clear a given usb feature.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Recipient The recipient of ClearFeature Request, should be one of Device/Interface/Endpoint.
+ @param Value Request Value.
+ @param Target Request Index.
+
+ @retval EFI_SUCCESS Usb feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the usb feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearDeviceFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN EFI_USB_RECIPIENT Recipient,
+ IN UINT16 Value,
+ IN UINT16 Target
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+
+ ASSERT (UsbIoPpi != NULL);
+
+ switch (Recipient) {
+ case EfiUsbDevice:
+ DevReq.RequestType = USB_DEV_CLEAR_FEATURE_REQ_TYPE_D;
+ break;
+
+ case EfiUsbInterface:
+ DevReq.RequestType = USB_DEV_CLEAR_FEATURE_REQ_TYPE_I;
+ break;
+
+ case EfiUsbEndpoint:
+ DevReq.RequestType = USB_DEV_CLEAR_FEATURE_REQ_TYPE_E;
+ break;
+ }
+
+ DevReq.Request = USB_DEV_CLEAR_FEATURE;
+ DevReq.Value = Value;
+ DevReq.Index = Target;
+ DevReq.Length = 0;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Configure a usb device to Configuration 1.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is set to use Configuration 1 successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb device due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetConfiguration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+ ZeroMem (&DevReq, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ DevReq.RequestType = USB_DEV_SET_CONFIGURATION_REQ_TYPE;
+ DevReq.Request = USB_DEV_SET_CONFIGURATION;
+ DevReq.Value = 1;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Clear Endpoint Halt.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointAddress The endpoint address.
+
+ @retval EFI_SUCCESS Endpoint halt is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the endpoint halt status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearEndpointHalt (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 EndpointAddress
+ )
+{
+ EFI_STATUS Status;
+ PEI_USB_DEVICE *PeiUsbDev;
+ EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDescriptor;
+ UINT8 EndpointIndex;
+
+ EndpointIndex = 0;
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (UsbIoPpi);
+
+ while (EndpointIndex < MAX_ENDPOINT) {
+ Status = UsbIoPpi->UsbGetEndpointDescriptor (PeiServices, UsbIoPpi, EndpointIndex, &EndpointDescriptor);
+ if (EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (EndpointDescriptor->EndpointAddress == EndpointAddress) {
+ break;
+ }
+
+ EndpointIndex++;
+ }
+
+ if (EndpointIndex == MAX_ENDPOINT) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = PeiUsbClearDeviceFeature (
+ PeiServices,
+ UsbIoPpi,
+ EfiUsbEndpoint,
+ EfiUsbEndpointHalt,
+ EndpointAddress
+ );
+
+ //
+ // set data toggle to zero.
+ //
+ if ((PeiUsbDev->DataToggle & (1 << EndpointIndex)) != 0) {
+ PeiUsbDev->DataToggle = (UINT8) (PeiUsbDev->DataToggle ^ (1 << EndpointIndex));
+ }
+
+ return Status;
+}
+
+/**
+ Judge if the port is connected with a usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A usb device is connected with the port.
+ @retval FALSE No usb device is connected with the port.
+
+**/
+BOOLEAN
+IsPortConnect (
+ IN UINT16 PortStatus
+ )
+{
+ //
+ // return the bit 0 value of PortStatus
+ //
+ if ((PortStatus & USB_PORT_STAT_CONNECTION) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Judge if the port is connected with a low-speed usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A low-speed usb device is connected with the port.
+ @retval FALSE No low-speed usb device is connected with the port.
+
+**/
+BOOLEAN
+IsPortLowSpeedDeviceAttached (
+ IN UINT16 PortStatus
+ )
+{
+ //
+ // return the bit 9 value of PortStatus
+ //
+ if ((PortStatus & USB_PORT_STAT_LOW_SPEED) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Judge if the port is in "connection change" status or not.
+
+ @param PortChangeStatus The usb port change status gotten.
+
+ @retval TRUE The port is in "connection change" status.
+ @retval FALSE The port is NOT in "connection change" status.
+
+**/
+BOOLEAN
+IsPortConnectChange (
+ IN UINT16 PortChangeStatus
+ )
+{
+ //
+ // return the bit 0 value of PortChangeStatus
+ //
+ if ((PortChangeStatus & USB_PORT_STAT_C_CONNECTION) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h new file mode 100644 index 0000000000..eafccfdbf8 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h @@ -0,0 +1,248 @@ +/** @file
+Common Libarary for PEI USB.
+
+Copyright (c) 1999 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_LIB_H_
+#define _PEI_USB_LIB_H_
+//
+// Standard device request and request type
+// By [Spec-USB20/Chapter-9.4]
+//
+#define USB_DEV_GET_STATUS 0x00
+#define USB_DEV_GET_STATUS_REQ_TYPE_D 0x80 // Receiver : Device
+#define USB_DEV_GET_STATUS_REQ_TYPE_I 0x81 // Receiver : Interface
+#define USB_DEV_GET_STATUS_REQ_TYPE_E 0x82 // Receiver : Endpoint
+
+#define USB_DEV_CLEAR_FEATURE 0x01
+#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device
+#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface
+#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint
+
+#define USB_DEV_SET_FEATURE 0x03
+#define USB_DEV_SET_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device
+#define USB_DEV_SET_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface
+#define USB_DEV_SET_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint
+
+#define USB_DEV_SET_ADDRESS 0x05
+#define USB_DEV_SET_ADDRESS_REQ_TYPE 0x00
+
+#define USB_DEV_GET_DESCRIPTOR 0x06
+#define USB_DEV_GET_DESCRIPTOR_REQ_TYPE 0x80
+
+#define USB_DEV_SET_DESCRIPTOR 0x07
+#define USB_DEV_SET_DESCRIPTOR_REQ_TYPE 0x00
+
+#define USB_DEV_GET_CONFIGURATION 0x08
+#define USB_DEV_GET_CONFIGURATION_REQ_TYPE 0x80
+
+#define USB_DEV_SET_CONFIGURATION 0x09
+#define USB_DEV_SET_CONFIGURATION_REQ_TYPE 0x00
+
+#define USB_DEV_GET_INTERFACE 0x0A
+#define USB_DEV_GET_INTERFACE_REQ_TYPE 0x81
+
+#define USB_DEV_SET_INTERFACE 0x0B
+#define USB_DEV_SET_INTERFACE_REQ_TYPE 0x01
+
+#define USB_DEV_SYNCH_FRAME 0x0C
+#define USB_DEV_SYNCH_FRAME_REQ_TYPE 0x82
+
+//
+// USB Descriptor types
+//
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_HUB 0x29
+#define USB_DT_HID 0x21
+
+//
+// USB request type
+//
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+//
+// USB request targer device
+//
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+
+typedef enum {
+ EfiUsbEndpointHalt,
+ EfiUsbDeviceRemoteWakeup
+} EFI_USB_STANDARD_FEATURE_SELECTOR;
+
+//
+// Usb Data recipient type
+//
+typedef enum {
+ EfiUsbDevice,
+ EfiUsbInterface,
+ EfiUsbEndpoint
+} EFI_USB_RECIPIENT;
+
+/**
+ Get a given usb descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value Request Value.
+ @param Index Request Index.
+ @param DescriptorLength Request descriptor Length.
+ @param Descriptor Request descriptor.
+
+
+ @retval EFI_SUCCESS Usb descriptor is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the usb descriptor due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbGetDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 Value,
+ IN UINT16 Index,
+ IN UINT16 DescriptorLength,
+ OUT VOID *Descriptor
+ );
+
+/**
+ Set a usb device with a specified address.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param AddressValue The address to assign.
+
+ @retval EFI_SUCCESS Usb device address is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb address due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetDeviceAddress (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 AddressValue
+ );
+
+/**
+ Clear a given usb feature.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Recipient The recipient of ClearFeature Request, should be one of Device/Interface/Endpoint.
+ @param Value Request Value.
+ @param Target Request Index.
+
+ @retval EFI_SUCCESS Usb feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the usb feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearDeviceFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN EFI_USB_RECIPIENT Recipient,
+ IN UINT16 Value,
+ IN UINT16 Target
+ );
+
+/**
+ Configure a usb device to Configuration 1.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is set to use Configuration 1 successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb device due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetConfiguration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi
+ );
+
+/**
+ Clear Endpoint Halt.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointAddress The endpoint address.
+
+ @retval EFI_SUCCESS Endpoint halt is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the endpoint halt status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearEndpointHalt (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 EndpointAddress
+ );
+
+/**
+ Judge if the port is connected with a usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A usb device is connected with the port.
+ @retval FALSE No usb device is connected with the port.
+
+**/
+BOOLEAN
+IsPortConnect (
+ IN UINT16 PortStatus
+ );
+
+/**
+ Judge if the port is connected with a low-speed usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A low-speed usb device is connected with the port.
+ @retval FALSE No low-speed usb device is connected with the port.
+
+**/
+BOOLEAN
+IsPortLowSpeedDeviceAttached (
+ IN UINT16 PortStatus
+ );
+
+/**
+ Judge if the port is in "connection change" status or not.
+
+ @param PortChangeStatus The usb port change status gotten.
+
+ @retval TRUE The port is in "connection change" status.
+ @retval FALSE The port is NOT in "connection change" status.
+
+**/
+BOOLEAN
+IsPortConnectChange (
+ IN UINT16 PortChangeStatus
+ );
+#endif
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf new file mode 100644 index 0000000000..a2442c112e --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf @@ -0,0 +1,65 @@ +## @file
+# Component description file for UsbBotPei module.
+#
+# Usb mass storage device Peim driver to support recovery from USB device.
+# Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions
+# of the BSD License which accompanies this distribution. The
+# full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = UsbBotPei
+ FILE_GUID = 8401A046-6F70-4505-8471-7015B40355E3
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = PeimInitializeUsbBot
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ PeiUsbLib.c
+ PeiAtapi.c
+ BotPeim.c
+ UsbBotPeim.c
+ UsbPeim.h
+ UsbBotPeim.h
+ PeiUsbLib.h
+ BotPeim.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+
+[LibraryClasses]
+ BaseMemoryLib
+ PeiServicesLib
+ PeimEntryPoint
+ DebugLib
+ PcdLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUsbTransferTimeoutValue
+
+[Ppis]
+ gEfiPeiVirtualBlockIoPpiGuid # PPI ALWAYS_PRODUCED
+ gPeiUsbIoPpiGuid # PPI ALWAYS_CONSUMED
+
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbIoPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid
+
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c new file mode 100644 index 0000000000..b04bd42cff --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c @@ -0,0 +1,720 @@ +/** @file
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbBotPeim.h"
+#include "BotPeim.h"
+
+//
+// Global function
+//
+EFI_PEI_NOTIFY_DESCRIPTOR mNotifyList = {
+ EFI_PEI_PPI_DESCRIPTOR_NOTIFY_DISPATCH | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
+ &gPeiUsbIoPpiGuid,
+ NotifyOnUsbIoPpi
+};
+
+EFI_PEI_RECOVERY_BLOCK_IO_PPI mRecoveryBlkIoPpi = {
+ BotGetNumberOfBlockDevices,
+ BotGetMediaInfo,
+ BotReadBlocks
+};
+
+EFI_PEI_PPI_DESCRIPTOR mPpiList = {
+ EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
+ &gEfiPeiVirtualBlockIoPpiGuid,
+ NULL
+};
+
+/**
+ Detect whether the removable media is present and whether it has changed.
+
+ @param[in] PeiServices General-purpose services that are available to every
+ PEIM.
+ @param[in] PeiBotDev Indicates the PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS The media status is successfully checked.
+ @retval Other Failed to detect media.
+
+**/
+EFI_STATUS
+PeiBotDetectMedia (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev
+ );
+
+/**
+ Initializes the Usb Bot.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCCESS Usb bot driver is successfully initialized.
+ @retval EFI_OUT_OF_RESOURCES Can't initialize the driver.
+
+**/
+EFI_STATUS
+EFIAPI
+PeimInitializeUsbBot (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+ UINTN UsbIoPpiInstance;
+ EFI_PEI_PPI_DESCRIPTOR *TempPpiDescriptor;
+ PEI_USB_IO_PPI *UsbIoPpi;
+
+ //
+ // Shadow this PEIM to run from memory
+ //
+ if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // locate all usb io PPIs
+ //
+ for (UsbIoPpiInstance = 0; UsbIoPpiInstance < PEI_FAT_MAX_USB_IO_PPI; UsbIoPpiInstance++) {
+
+ Status = PeiServicesLocatePpi (
+ &gPeiUsbIoPpiGuid,
+ UsbIoPpiInstance,
+ &TempPpiDescriptor,
+ (VOID **) &UsbIoPpi
+ );
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+ }
+ //
+ // Register a notify function
+ //
+ return PeiServicesNotifyPpi (&mNotifyList);
+}
+
+/**
+ UsbIo installation notification function.
+
+ This function finds out all the current USB IO PPIs in the system and add them
+ into private data.
+
+ @param PeiServices Indirect reference to the PEI Services Table.
+ @param NotifyDesc Address of the notification descriptor data structure.
+ @param InvokePpi Address of the PPI that was invoked.
+
+ @retval EFI_SUCCESS The function completes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+NotifyOnUsbIoPpi (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
+ IN VOID *InvokePpi
+ )
+{
+ PEI_USB_IO_PPI *UsbIoPpi;
+
+ UsbIoPpi = (PEI_USB_IO_PPI *) InvokePpi;
+
+ InitUsbBot (PeiServices, UsbIoPpi);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize the usb bot device.
+
+ @param[in] PeiServices General-purpose services that are available to every
+ PEIM.
+ @param[in] UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS The usb bot device is initialized successfully.
+ @retval Other Failed to initialize media.
+
+**/
+EFI_STATUS
+InitUsbBot (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi
+ )
+{
+ PEI_BOT_DEVICE *PeiBotDevice;
+ EFI_STATUS Status;
+ EFI_USB_INTERFACE_DESCRIPTOR *InterfaceDesc;
+ UINTN MemPages;
+ EFI_PHYSICAL_ADDRESS AllocateAddress;
+ EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDesc;
+ UINT8 Index;
+
+ //
+ // Check its interface
+ //
+ Status = UsbIoPpi->UsbGetInterfaceDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ &InterfaceDesc
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Check if it is the BOT device we support
+ //
+ if ((InterfaceDesc->InterfaceClass != 0x08) || (InterfaceDesc->InterfaceProtocol != 0x50)) {
+
+ return EFI_NOT_FOUND;
+ }
+
+ MemPages = sizeof (PEI_BOT_DEVICE) / EFI_PAGE_SIZE + 1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ MemPages,
+ &AllocateAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PeiBotDevice = (PEI_BOT_DEVICE *) ((UINTN) AllocateAddress);
+
+ PeiBotDevice->Signature = PEI_BOT_DEVICE_SIGNATURE;
+ PeiBotDevice->UsbIoPpi = UsbIoPpi;
+ PeiBotDevice->AllocateAddress = (UINTN) AllocateAddress;
+ PeiBotDevice->BotInterface = InterfaceDesc;
+
+ //
+ // Default value
+ //
+ PeiBotDevice->Media.DeviceType = UsbMassStorage;
+ PeiBotDevice->Media.BlockSize = 0x200;
+
+ //
+ // Check its Bulk-in/Bulk-out endpoint
+ //
+ for (Index = 0; Index < 2; Index++) {
+ Status = UsbIoPpi->UsbGetEndpointDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ Index,
+ &EndpointDesc
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if ((EndpointDesc->EndpointAddress & 0x80) != 0) {
+ PeiBotDevice->BulkInEndpoint = EndpointDesc;
+ } else {
+ PeiBotDevice->BulkOutEndpoint = EndpointDesc;
+ }
+ }
+
+ CopyMem (
+ &(PeiBotDevice->BlkIoPpi),
+ &mRecoveryBlkIoPpi,
+ sizeof (EFI_PEI_RECOVERY_BLOCK_IO_PPI)
+ );
+ CopyMem (
+ &(PeiBotDevice->BlkIoPpiList),
+ &mPpiList,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ PeiBotDevice->BlkIoPpiList.Ppi = &PeiBotDevice->BlkIoPpi;
+
+ Status = PeiUsbInquiry (PeiServices, PeiBotDevice);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ 1,
+ &AllocateAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PeiBotDevice->SensePtr = (ATAPI_REQUEST_SENSE_DATA *) ((UINTN) AllocateAddress);
+
+ Status = PeiServicesInstallPpi (&PeiBotDevice->BlkIoPpiList);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Gets the count of block I/O devices that one specific block driver detects.
+
+ This function is used for getting the count of block I/O devices that one
+ specific block driver detects. To the PEI ATAPI driver, it returns the number
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
+ to every PEIM.
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ instance.
+ @param[out] NumberBlockDevices The number of block I/O devices discovered.
+
+ @retval EFI_SUCCESS Operation performed successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+BotGetNumberOfBlockDevices (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
+ OUT UINTN *NumberBlockDevices
+ )
+{
+ //
+ // For Usb devices, this value should be always 1
+ //
+ *NumberBlockDevices = 1;
+ return EFI_SUCCESS;
+}
+
+/**
+ Gets a block device's media information.
+
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
+ information accordingly.
+
+ @param[in] PeiServices General-purpose services that are available to every
+ PEIM
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
+ device index that was assigned during the enumeration
+ process. This index is a number from one to
+ NumberBlockDevices.
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
+ data structure.
+
+ @retval EFI_SUCCESS Media information about the specified block device
+ was obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ error.
+
+**/
+EFI_STATUS
+EFIAPI
+BotGetMediaInfo (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
+ IN UINTN DeviceIndex,
+ OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo
+ )
+{
+ PEI_BOT_DEVICE *PeiBotDev;
+ EFI_STATUS Status;
+
+ PeiBotDev = PEI_BOT_DEVICE_FROM_THIS (This);
+
+ //
+ // First test unit ready
+ //
+ PeiUsbTestUnitReady (
+ PeiServices,
+ PeiBotDev
+ );
+
+ Status = PeiBotDetectMedia (
+ PeiServices,
+ PeiBotDev
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ CopyMem (
+ MediaInfo,
+ &(PeiBotDev->Media),
+ sizeof (EFI_PEI_BLOCK_IO_MEDIA)
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads the requested number of blocks from the specified block device.
+
+ The function reads the requested number of blocks from the device. All the
+ blocks are read, or an error is returned. If there is no media in the device,
+ the function returns EFI_NO_MEDIA.
+
+ @param[in] PeiServices General-purpose services that are available to
+ every PEIM.
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
+ This index is a number from one to NumberBlockDevices.
+ @param[in] StartLBA The starting logical block address (LBA) to read from
+ on the device
+ @param[in] BufferSize The size of the Buffer in bytes. This number must be
+ a multiple of the intrinsic block size of the device.
+ @param[out] Buffer A pointer to the destination buffer for the data.
+ The caller is responsible for the ownership of the
+ buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ to perform the read operation.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ valid, or the buffer is not properly aligned.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
+ the intrinsic block size of the device.
+
+**/
+EFI_STATUS
+EFIAPI
+BotReadBlocks (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
+ IN UINTN DeviceIndex,
+ IN EFI_PEI_LBA StartLBA,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ PEI_BOT_DEVICE *PeiBotDev;
+ EFI_STATUS Status;
+ UINTN BlockSize;
+ UINTN NumberOfBlocks;
+
+ Status = EFI_SUCCESS;
+ PeiBotDev = PEI_BOT_DEVICE_FROM_THIS (This);
+
+ //
+ // Check parameters
+ //
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (BufferSize == 0) {
+ return EFI_SUCCESS;
+ }
+
+ if (!PeiBotDev->Media.MediaPresent) {
+ return EFI_NO_MEDIA;
+ }
+
+ BlockSize = PeiBotDev->Media.BlockSize;
+
+ if (BufferSize % BlockSize != 0) {
+ Status = EFI_BAD_BUFFER_SIZE;
+ }
+
+ if (StartLBA > PeiBotDev->Media.LastBlock) {
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+ NumberOfBlocks = BufferSize / (PeiBotDev->Media.BlockSize);
+
+ if (Status == EFI_SUCCESS) {
+
+ Status = PeiUsbTestUnitReady (
+ PeiServices,
+ PeiBotDev
+ );
+ if (Status == EFI_SUCCESS) {
+ Status = PeiUsbRead10 (
+ PeiServices,
+ PeiBotDev,
+ Buffer,
+ StartLBA,
+ 1
+ );
+ }
+ } else {
+ //
+ // To generate sense data for DetectMedia use.
+ //
+ PeiUsbTestUnitReady (
+ PeiServices,
+ PeiBotDev
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ //
+ // if any error encountered, detect what happened to the media and
+ // update the media info accordingly.
+ //
+ Status = PeiBotDetectMedia (
+ PeiServices,
+ PeiBotDev
+ );
+ if (Status != EFI_SUCCESS) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ NumberOfBlocks = BufferSize / PeiBotDev->Media.BlockSize;
+
+ if (!(PeiBotDev->Media.MediaPresent)) {
+ return EFI_NO_MEDIA;
+ }
+
+ if (BufferSize % (PeiBotDev->Media.BlockSize) != 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ if (StartLBA > PeiBotDev->Media.LastBlock) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((StartLBA + NumberOfBlocks - 1) > PeiBotDev->Media.LastBlock) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = PeiUsbRead10 (
+ PeiServices,
+ PeiBotDev,
+ Buffer,
+ StartLBA,
+ NumberOfBlocks
+ );
+
+ switch (Status) {
+
+ case EFI_SUCCESS:
+ return EFI_SUCCESS;
+
+ default:
+ return EFI_DEVICE_ERROR;
+ }
+ } else {
+ StartLBA += 1;
+ NumberOfBlocks -= 1;
+ Buffer = (UINT8 *) Buffer + PeiBotDev->Media.BlockSize;
+
+ if (NumberOfBlocks == 0) {
+ return EFI_SUCCESS;
+ }
+
+ Status = PeiUsbRead10 (
+ PeiServices,
+ PeiBotDev,
+ Buffer,
+ StartLBA,
+ NumberOfBlocks
+ );
+ switch (Status) {
+
+ case EFI_SUCCESS:
+ return EFI_SUCCESS;
+
+ default:
+ return EFI_DEVICE_ERROR;
+
+ }
+ }
+}
+
+/**
+ Detect whether the removable media is present and whether it has changed.
+
+ @param[in] PeiServices General-purpose services that are available to every
+ PEIM.
+ @param[in] PeiBotDev Indicates the PEI_BOT_DEVICE instance.
+
+ @retval EFI_SUCCESS The media status is successfully checked.
+ @retval Other Failed to detect media.
+
+**/
+EFI_STATUS
+PeiBotDetectMedia (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev
+ )
+{
+ EFI_STATUS Status;
+ EFI_STATUS FloppyStatus;
+ UINTN SenseCounts;
+ BOOLEAN NeedReadCapacity;
+ EFI_PHYSICAL_ADDRESS AllocateAddress;
+ ATAPI_REQUEST_SENSE_DATA *SensePtr;
+ UINTN Retry;
+
+ //
+ // if there is no media present,or media not changed,
+ // the request sense command will detect faster than read capacity command.
+ // read capacity command can be bypassed, thus improve performance.
+ //
+ SenseCounts = 0;
+ NeedReadCapacity = TRUE;
+
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ 1,
+ &AllocateAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SensePtr = PeiBotDev->SensePtr;
+ ZeroMem (SensePtr, EFI_PAGE_SIZE);
+
+ Status = PeiUsbRequestSense (
+ PeiServices,
+ PeiBotDev,
+ &SenseCounts,
+ (UINT8 *) SensePtr
+ );
+
+ if (Status == EFI_SUCCESS) {
+ //
+ // No Media
+ //
+ if (IsNoMedia (SensePtr, SenseCounts)) {
+ NeedReadCapacity = FALSE;
+ PeiBotDev->Media.MediaPresent = FALSE;
+ PeiBotDev->Media.LastBlock = 0;
+ } else {
+ //
+ // Media Changed
+ //
+ if (IsMediaChange (SensePtr, SenseCounts)) {
+ PeiBotDev->Media.MediaPresent = TRUE;
+ }
+ //
+ // Media Error
+ //
+ if (IsMediaError (SensePtr, SenseCounts)) {
+ //
+ // if media error encountered, make it look like no media present.
+ //
+ PeiBotDev->Media.MediaPresent = FALSE;
+ PeiBotDev->Media.LastBlock = 0;
+ }
+
+ }
+
+ }
+
+ if (NeedReadCapacity) {
+ //
+ // Retry at most 4 times to detect media info
+ //
+ for (Retry = 0; Retry < 4; Retry++) {
+ switch (PeiBotDev->DeviceType) {
+ case USBCDROM:
+ Status = PeiUsbReadCapacity (
+ PeiServices,
+ PeiBotDev
+ );
+ break;
+
+ case USBFLOPPY2:
+ Status = PeiUsbReadFormattedCapacity (
+ PeiServices,
+ PeiBotDev
+ );
+ if (EFI_ERROR(Status)||
+ !PeiBotDev->Media.MediaPresent) {
+ //
+ // retry the ReadCapacity command
+ //
+ PeiBotDev->DeviceType = USBFLOPPY;
+ Status = EFI_DEVICE_ERROR;
+ }
+ break;
+
+ case USBFLOPPY:
+ Status = PeiUsbReadCapacity (
+ PeiServices,
+ PeiBotDev
+ );
+ //
+ // retry the ReadFormatCapacity command
+ //
+ PeiBotDev->DeviceType = USBFLOPPY2;
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ SenseCounts = 0;
+ ZeroMem (SensePtr, EFI_PAGE_SIZE);
+
+ if (Status == EFI_SUCCESS) {
+ break;
+ }
+
+ FloppyStatus = PeiUsbRequestSense (
+ PeiServices,
+ PeiBotDev,
+ &SenseCounts,
+ (UINT8 *) SensePtr
+ );
+
+ //
+ // If Request Sense data failed,retry.
+ //
+ if (EFI_ERROR (FloppyStatus)) {
+ continue;
+ }
+ //
+ // No Media
+ //
+ if (IsNoMedia (SensePtr, SenseCounts)) {
+ PeiBotDev->Media.MediaPresent = FALSE;
+ PeiBotDev->Media.LastBlock = 0;
+ break;
+ }
+
+ if (IsMediaError (SensePtr, SenseCounts)) {
+ //
+ // if media error encountered, make it look like no media present.
+ //
+ PeiBotDev->Media.MediaPresent = FALSE;
+ PeiBotDev->Media.LastBlock = 0;
+ break;
+ }
+ }
+ //
+ // ENDFOR
+ //
+ // tell whether the readcapacity process is successful or not
+ // ("Status" variable record the latest status returned
+ // by ReadCapacity )
+ //
+ if (Status != EFI_SUCCESS) {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h new file mode 100644 index 0000000000..26d08dfd56 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h @@ -0,0 +1,233 @@ +/** @file
+Usb BOT Peim definition.
+
+Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_BOT_PEIM_H_
+#define _PEI_USB_BOT_PEIM_H_
+
+#include <PiPei.h>
+
+#include <Ppi/UsbIo.h>
+#include <Ppi/UsbHostController.h>
+#include <Ppi/BlockIo.h>
+
+#include <Library/DebugLib.h>
+
+#include <IndustryStandard/Usb.h>
+#include <IndustryStandard/Atapi.h>
+
+#define PEI_FAT_MAX_USB_IO_PPI 127
+
+/**
+ Gets the count of block I/O devices that one specific block driver detects.
+
+ This function is used for getting the count of block I/O devices that one
+ specific block driver detects. To the PEI ATAPI driver, it returns the number
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
+ to every PEIM.
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ instance.
+ @param[out] NumberBlockDevices The number of block I/O devices discovered.
+
+ @retval EFI_SUCCESS Operation performed successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+BotGetNumberOfBlockDevices (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
+ OUT UINTN *NumberBlockDevices
+ );
+
+/**
+ Gets a block device's media information.
+
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
+ information accordingly.
+
+ @param[in] PeiServices General-purpose services that are available to every
+ PEIM
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
+ device index that was assigned during the enumeration
+ process. This index is a number from one to
+ NumberBlockDevices.
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
+ data structure.
+
+ @retval EFI_SUCCESS Media information about the specified block device
+ was obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ error.
+
+**/
+EFI_STATUS
+EFIAPI
+BotGetMediaInfo (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
+ IN UINTN DeviceIndex,
+ OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo
+ );
+
+/**
+ Reads the requested number of blocks from the specified block device.
+
+ The function reads the requested number of blocks from the device. All the
+ blocks are read, or an error is returned. If there is no media in the device,
+ the function returns EFI_NO_MEDIA.
+
+ @param[in] PeiServices General-purpose services that are available to
+ every PEIM.
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
+ This index is a number from one to NumberBlockDevices.
+ @param[in] StartLBA The starting logical block address (LBA) to read from
+ on the device
+ @param[in] BufferSize The size of the Buffer in bytes. This number must be
+ a multiple of the intrinsic block size of the device.
+ @param[out] Buffer A pointer to the destination buffer for the data.
+ The caller is responsible for the ownership of the
+ buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ to perform the read operation.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ valid, or the buffer is not properly aligned.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
+ the intrinsic block size of the device.
+
+**/
+EFI_STATUS
+EFIAPI
+BotReadBlocks (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
+ IN UINTN DeviceIndex,
+ IN EFI_PEI_LBA StartLBA,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ );
+
+/**
+ UsbIo installation notification function.
+
+ This function finds out all the current USB IO PPIs in the system and add them
+ into private data.
+
+ @param PeiServices Indirect reference to the PEI Services Table.
+ @param NotifyDesc Address of the notification descriptor data structure.
+ @param InvokePpi Address of the PPI that was invoked.
+
+ @retval EFI_SUCCESS The function completes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+NotifyOnUsbIoPpi (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
+ IN VOID *InvokePpi
+ );
+
+/**
+ Initialize the usb bot device.
+
+ @param[in] PeiServices General-purpose services that are available to every
+ PEIM.
+ @param[in] UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS The usb bot device is initialized successfully.
+ @retval Other Failed to initialize media.
+
+**/
+EFI_STATUS
+InitUsbBot (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi
+ );
+
+#define USBCDROM 1 // let the device type value equal to USBCDROM, which is defined by PI spec.
+ // Therefore the CdExpressPei module can do recovery on UsbCdrom.
+#define USBFLOPPY 2 // for those that use ReadCapacity(0x25) command to retrieve media capacity
+#define USBFLOPPY2 3 // for those that use ReadFormatCapacity(0x23) command to retrieve media capacity
+
+//
+// Bot device structure
+//
+#define PEI_BOT_DEVICE_SIGNATURE SIGNATURE_32 ('U', 'B', 'O', 'T')
+typedef struct {
+ UINTN Signature;
+ EFI_PEI_RECOVERY_BLOCK_IO_PPI BlkIoPpi;
+ EFI_PEI_PPI_DESCRIPTOR BlkIoPpiList;
+ EFI_PEI_BLOCK_IO_MEDIA Media;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ EFI_USB_INTERFACE_DESCRIPTOR *BotInterface;
+ EFI_USB_ENDPOINT_DESCRIPTOR *BulkInEndpoint;
+ EFI_USB_ENDPOINT_DESCRIPTOR *BulkOutEndpoint;
+ UINTN AllocateAddress;
+ UINTN DeviceType;
+ ATAPI_REQUEST_SENSE_DATA *SensePtr;
+} PEI_BOT_DEVICE;
+
+#define PEI_BOT_DEVICE_FROM_THIS(a) CR (a, PEI_BOT_DEVICE, BlkIoPpi, PEI_BOT_DEVICE_SIGNATURE)
+
+/**
+ Send ATAPI command using BOT protocol.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param PeiBotDev The instance to PEI_BOT_DEVICE.
+ @param Command The command to be sent to ATAPI device.
+ @param CommandSize The length of the data to be sent.
+ @param DataBuffer The pointer to the data.
+ @param BufferLength The length of the data.
+ @param Direction The direction of the data.
+ @param TimeOutInMilliSeconds Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_DEVICE_ERROR Successful to get the status of device.
+ @retval EFI_SUCCESS Failed to get the status of device.
+
+**/
+EFI_STATUS
+PeiAtapiCommand (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_BOT_DEVICE *PeiBotDev,
+ IN VOID *Command,
+ IN UINT8 CommandSize,
+ IN VOID *DataBuffer,
+ IN UINT32 BufferLength,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT16 TimeOutInMilliSeconds
+ );
+
+#endif
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h new file mode 100644 index 0000000000..4f3f57f0bc --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h @@ -0,0 +1,179 @@ +/** @file
+Usb Peim definition.
+
+Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_PEIM_H_
+#define _PEI_USB_PEIM_H_
+
+
+#include <PiPei.h>
+
+#include <Ppi/UsbIo.h>
+#include <Ppi/UsbHostController.h>
+#include <Ppi/BlockIo.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/PcdLib.h>
+
+#include <IndustryStandard/Usb.h>
+
+#define MAX_ROOT_PORT 2
+#define MAX_ENDPOINT 16
+
+#define USB_SLOW_SPEED_DEVICE 0x01
+#define USB_FULL_SPEED_DEVICE 0x02
+
+#define PEI_USB_DEVICE_SIGNATURE SIGNATURE_32 ('U', 's', 'b', 'D')
+typedef struct {
+ UINTN Signature;
+ PEI_USB_IO_PPI UsbIoPpi;
+ EFI_PEI_PPI_DESCRIPTOR UsbIoPpiList;
+ UINT8 DeviceAddress;
+ UINT8 MaxPacketSize0;
+ UINT8 DeviceSpeed;
+ UINT8 DataToggle;
+ UINT8 IsHub;
+ UINT8 DownStreamPortNo;
+ UINT8 Reserved[2]; // Padding for IPF
+ UINTN AllocateAddress;
+ PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi;
+ UINT8 ConfigurationData[1024];
+ EFI_USB_CONFIG_DESCRIPTOR *ConfigDesc;
+ EFI_USB_INTERFACE_DESCRIPTOR *InterfaceDesc;
+ EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDesc[MAX_ENDPOINT];
+} PEI_USB_DEVICE;
+
+#define PEI_USB_DEVICE_FROM_THIS(a) CR (a, PEI_USB_DEVICE, UsbIoPpi, PEI_USB_DEVICE_SIGNATURE)
+
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_IO_PPI.
+ @param Request USB device request to send.
+ @param Direction Specifies the data direction for the data stage.
+ @param Timeout Indicates the maximum timeout, in millisecond.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT32 Timeout,
+ IN OUT VOID *Data, OPTIONAL
+ IN UINTN DataLength OPTIONAL
+ );
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_IO_PPI.
+ @param DeviceEndpoint Endpoint number and its direction in bit 7.
+ @param Data A pointer to the buffer of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param Timeout Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 DeviceEndpoint,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout
+ );
+
+/**
+ Get the usb interface descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+ @param InterfaceDescriptor Request interface descriptor.
+
+
+ @retval EFI_SUCCESS Usb interface descriptor is obtained successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbGetInterfaceDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ OUT EFI_USB_INTERFACE_DESCRIPTOR **InterfaceDescriptor
+ );
+
+/**
+ Get the usb endpoint descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointIndex The valid index of the specified endpoint.
+ @param EndpointDescriptor Request endpoint descriptor.
+
+ @retval EFI_SUCCESS Usb endpoint descriptor is obtained successfully.
+ @retval EFI_NOT_FOUND Usb endpoint descriptor is NOT found.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbGetEndpointDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 EndpointIndex,
+ OUT EFI_USB_ENDPOINT_DESCRIPTOR **EndpointDescriptor
+ );
+
+/**
+ Reset the port and re-configure the usb device.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is reset and configured successfully.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbPortReset (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This
+ );
+
+#endif
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c new file mode 100644 index 0000000000..5b7ebfad90 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c @@ -0,0 +1,537 @@ +/** @file
+Usb Hub Request Support In PEI Phase
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbPeim.h"
+#include "HubPeim.h"
+#include "PeiUsbLib.h"
+
+/**
+ Get a given hub port status.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Port Usb hub port number (starting from 1).
+ @param PortStatus Current Hub port status and change status.
+
+ @retval EFI_SUCCESS Port status is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the port status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubGetPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Port,
+ OUT UINT32 *PortStatus
+ )
+{
+ EFI_USB_DEVICE_REQUEST DeviceRequest;
+
+ ZeroMem (&DeviceRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DeviceRequest.RequestType = USB_HUB_GET_PORT_STATUS_REQ_TYPE;
+ DeviceRequest.Request = USB_HUB_GET_PORT_STATUS;
+ DeviceRequest.Index = Port;
+ DeviceRequest.Length = (UINT16) sizeof (UINT32);
+
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DeviceRequest,
+ EfiUsbDataIn,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ PortStatus,
+ sizeof (UINT32)
+ );
+
+}
+
+/**
+ Set specified feature to a given hub port.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Port Usb hub port number (starting from 1).
+ @param Value New feature value.
+
+ @retval EFI_SUCCESS Port feature is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the port feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubSetPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Port,
+ IN UINT8 Value
+ )
+{
+ EFI_USB_DEVICE_REQUEST DeviceRequest;
+
+ ZeroMem (&DeviceRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DeviceRequest.RequestType = USB_HUB_SET_PORT_FEATURE_REQ_TYPE;
+ DeviceRequest.Request = USB_HUB_SET_PORT_FEATURE;
+ DeviceRequest.Value = Value;
+ DeviceRequest.Index = Port;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DeviceRequest,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Clear specified feature on a given hub port.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Port Usb hub port number (starting from 1).
+ @param Value Feature value that will be cleared from the hub port.
+
+ @retval EFI_SUCCESS Port feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the port feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubClearPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Port,
+ IN UINT8 Value
+ )
+{
+ EFI_USB_DEVICE_REQUEST DeviceRequest;
+
+ ZeroMem (&DeviceRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DeviceRequest.RequestType = USB_HUB_CLEAR_FEATURE_PORT_REQ_TYPE;
+ DeviceRequest.Request = USB_HUB_CLEAR_FEATURE_PORT;
+ DeviceRequest.Value = Value;
+ DeviceRequest.Index = Port;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DeviceRequest,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Get a given hub status.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param HubStatus Current Hub status and change status.
+
+ @retval EFI_SUCCESS Hub status is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the hub status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubGetHubStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ OUT UINT32 *HubStatus
+ )
+{
+ EFI_USB_DEVICE_REQUEST DeviceRequest;
+
+ ZeroMem (&DeviceRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DeviceRequest.RequestType = USB_HUB_GET_HUB_STATUS_REQ_TYPE;
+ DeviceRequest.Request = USB_HUB_GET_HUB_STATUS;
+ DeviceRequest.Length = (UINT16) sizeof (UINT32);
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DeviceRequest,
+ EfiUsbDataIn,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ HubStatus,
+ sizeof (UINT32)
+ );
+}
+
+/**
+ Set specified feature to a given hub.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value New feature value.
+
+ @retval EFI_SUCCESS Port feature is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the port feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubSetHubFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Value
+ )
+{
+ EFI_USB_DEVICE_REQUEST DeviceRequest;
+
+ ZeroMem (&DeviceRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DeviceRequest.RequestType = USB_HUB_SET_HUB_FEATURE_REQ_TYPE;
+ DeviceRequest.Request = USB_HUB_SET_HUB_FEATURE;
+ DeviceRequest.Value = Value;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DeviceRequest,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Clear specified feature on a given hub.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value Feature value that will be cleared from the hub port.
+
+ @retval EFI_SUCCESS Hub feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the hub feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubClearHubFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Value
+ )
+{
+ EFI_USB_DEVICE_REQUEST DeviceRequest;
+
+ ZeroMem (&DeviceRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DeviceRequest.RequestType = USB_HUB_CLEAR_FEATURE_REQ_TYPE;
+ DeviceRequest.Request = USB_HUB_CLEAR_FEATURE;
+ DeviceRequest.Value = Value;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DeviceRequest,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Get a given hub descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param DescriptorSize The length of Hub Descriptor buffer.
+ @param HubDescriptor Caller allocated buffer to store the hub descriptor if
+ successfully returned.
+
+ @retval EFI_SUCCESS Hub descriptor is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the hub descriptor due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiGetHubDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINTN DescriptorSize,
+ OUT EFI_USB_HUB_DESCRIPTOR *HubDescriptor
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+ ZeroMem (&DevReq, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ //
+ // Fill Device request packet
+ //
+ DevReq.RequestType = USB_RT_HUB | 0x80;
+ DevReq.Request = USB_HUB_GET_DESCRIPTOR;
+ DevReq.Value = USB_DT_HUB << 8;
+ DevReq.Length = (UINT16)DescriptorSize;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbDataIn,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ HubDescriptor,
+ (UINT16)DescriptorSize
+ );
+}
+
+/**
+ Configure a given hub.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param PeiUsbDevice Indicating the hub controller device that will be configured
+
+ @retval EFI_SUCCESS Hub configuration is done successfully.
+ @retval EFI_DEVICE_ERROR Cannot configure the hub due to a hardware error.
+
+**/
+EFI_STATUS
+PeiDoHubConfig (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice
+ )
+{
+ EFI_USB_HUB_DESCRIPTOR HubDescriptor;
+ EFI_STATUS Status;
+ EFI_USB_HUB_STATUS HubStatus;
+ UINTN Index;
+ UINT32 PortStatus;
+ PEI_USB_IO_PPI *UsbIoPpi;
+
+ ZeroMem (&HubDescriptor, sizeof (HubDescriptor));
+ UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
+
+ //
+ // First get the hub descriptor length
+ //
+ Status = PeiGetHubDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ 2,
+ &HubDescriptor
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+ //
+ // First get the whole descriptor, then
+ // get the number of hub ports
+ //
+ Status = PeiGetHubDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ HubDescriptor.Length,
+ &HubDescriptor
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ PeiUsbDevice->DownStreamPortNo = HubDescriptor.NbrPorts;
+
+ Status = PeiHubGetHubStatus (
+ PeiServices,
+ UsbIoPpi,
+ (UINT32 *) &HubStatus
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+ //
+ // Get all hub ports status
+ //
+ for (Index = 0; Index < PeiUsbDevice->DownStreamPortNo; Index++) {
+
+ Status = PeiHubGetPortStatus (
+ PeiServices,
+ UsbIoPpi,
+ (UINT8) (Index + 1),
+ &PortStatus
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ }
+ //
+ // Power all the hub ports
+ //
+ for (Index = 0; Index < PeiUsbDevice->DownStreamPortNo; Index++) {
+ Status = PeiHubSetPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ (UINT8) (Index + 1),
+ EfiUsbPortPower
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ }
+ //
+ // Clear Hub Status Change
+ //
+ Status = PeiHubGetHubStatus (
+ PeiServices,
+ UsbIoPpi,
+ (UINT32 *) &HubStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ } else {
+ //
+ // Hub power supply change happens
+ //
+ if ((HubStatus.HubChangeStatus & HUB_CHANGE_LOCAL_POWER) != 0) {
+ PeiHubClearHubFeature (
+ PeiServices,
+ UsbIoPpi,
+ C_HUB_LOCAL_POWER
+ );
+ }
+ //
+ // Hub change overcurrent happens
+ //
+ if ((HubStatus.HubChangeStatus & HUB_CHANGE_OVERCURRENT) != 0) {
+ PeiHubClearHubFeature (
+ PeiServices,
+ UsbIoPpi,
+ C_HUB_OVER_CURRENT
+ );
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Send reset signal over the given root hub port.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param PortNum Usb hub port number (starting from 1).
+
+**/
+VOID
+PeiResetHubPort (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 PortNum
+ )
+{
+ UINT8 Try;
+ EFI_USB_PORT_STATUS HubPortStatus;
+
+
+ MicroSecondDelay (100 * 1000);
+
+ //
+ // reset root port
+ //
+ PeiHubSetPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ PortNum,
+ EfiUsbPortReset
+ );
+
+ Try = 10;
+ do {
+ PeiHubGetPortStatus (
+ PeiServices,
+ UsbIoPpi,
+ PortNum,
+ (UINT32 *) &HubPortStatus
+ );
+
+ MicroSecondDelay (2 * 1000);
+ Try -= 1;
+ } while ((HubPortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0 && Try > 0);
+
+ //
+ // clear reset root port
+ //
+ PeiHubClearPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ PortNum,
+ EfiUsbPortReset
+ );
+
+ MicroSecondDelay (1 * 1000);
+
+ PeiHubClearPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ PortNum,
+ EfiUsbPortConnectChange
+ );
+
+ //
+ // Set port enable
+ //
+ PeiHubSetPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ PortNum,
+ EfiUsbPortEnable
+ );
+
+ //
+ // Clear any change status
+ //
+
+ PeiHubClearPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ PortNum,
+ EfiUsbPortEnableChange
+ );
+
+ MicroSecondDelay (10 * 1000);
+
+ return;
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h new file mode 100644 index 0000000000..273a26c1ae --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h @@ -0,0 +1,279 @@ +/** @file
+Constants definitions for Usb Hub Peim
+
+Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_HUB_PEIM_H_
+#define _PEI_HUB_PEIM_H_
+
+
+//
+// Hub feature numbers
+//
+#define C_HUB_LOCAL_POWER 0
+#define C_HUB_OVER_CURRENT 1
+
+//
+// Hub class code & sub class code
+//
+#define CLASS_CODE_HUB 0x09
+#define SUB_CLASS_CODE_HUB 0
+
+//
+// Hub Status & Hub Change bit masks
+//
+#define HUB_STATUS_LOCAL_POWER 0x0001
+#define HUB_STATUS_OVERCURRENT 0x0002
+
+#define HUB_CHANGE_LOCAL_POWER 0x0001
+#define HUB_CHANGE_OVERCURRENT 0x0002
+
+//
+// Hub Characteristics
+//
+#define HUB_CHAR_LPSM 0x0003
+#define HUB_CHAR_COMPOUND 0x0004
+#define HUB_CHAR_OCPM 0x0018
+
+//
+// Standard hub request and request type
+// By [Spec-USB20/Chapter-11.24]
+//
+#define USB_HUB_CLEAR_FEATURE 0x01
+#define USB_HUB_CLEAR_FEATURE_REQ_TYPE 0x20
+
+#define USB_HUB_CLEAR_FEATURE_PORT 0x01
+#define USB_HUB_CLEAR_FEATURE_PORT_REQ_TYPE 0x23
+
+#define USB_HUB_GET_BUS_STATE 0x02
+#define USB_HUB_GET_BUS_STATE_REQ_TYPE 0xA3
+
+#define USB_HUB_GET_DESCRIPTOR 0x06
+#define USB_HUB_GET_DESCRIPTOR_REQ_TYPE 0xA0
+
+#define USB_HUB_GET_HUB_STATUS 0x00
+#define USB_HUB_GET_HUB_STATUS_REQ_TYPE 0xA0
+
+#define USB_HUB_GET_PORT_STATUS 0x00
+#define USB_HUB_GET_PORT_STATUS_REQ_TYPE 0xA3
+
+#define USB_HUB_SET_DESCRIPTOR 0x07
+#define USB_HUB_SET_DESCRIPTOR_REQ_TYPE 0x20
+
+#define USB_HUB_SET_HUB_FEATURE 0x03
+#define USB_HUB_SET_HUB_FEATURE_REQ_TYPE 0x20
+
+#define USB_HUB_SET_PORT_FEATURE 0x03
+#define USB_HUB_SET_PORT_FEATURE_REQ_TYPE 0x23
+
+#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
+#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
+
+#define MAXBYTES 8
+#pragma pack(1)
+//
+// Hub descriptor, the last two fields are of variable lenght.
+//
+typedef struct {
+ UINT8 Length;
+ UINT8 DescriptorType;
+ UINT8 NbrPorts;
+ UINT8 HubCharacteristics[2];
+ UINT8 PwrOn2PwrGood;
+ UINT8 HubContrCurrent;
+ UINT8 Filler[MAXBYTES];
+} EFI_USB_HUB_DESCRIPTOR;
+
+typedef struct {
+ UINT16 HubStatus;
+ UINT16 HubChangeStatus;
+} EFI_USB_HUB_STATUS;
+
+#pragma pack()
+/**
+ Get a given hub port status.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Port Usb hub port number (starting from 1).
+ @param PortStatus Current Hub port status and change status.
+
+ @retval EFI_SUCCESS Port status is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the port status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubGetPortStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Port,
+ OUT UINT32 *PortStatus
+ );
+
+/**
+ Set specified feature to a given hub port.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Port Usb hub port number (starting from 1).
+ @param Value New feature value.
+
+ @retval EFI_SUCCESS Port feature is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the port feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubSetPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Port,
+ IN UINT8 Value
+ );
+
+/**
+ Set specified feature to a given hub.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value New feature value.
+
+ @retval EFI_SUCCESS Port feature is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the port feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubSetHubFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Value
+ );
+
+/**
+ Get a given hub status.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param HubStatus Current Hub status and change status.
+
+ @retval EFI_SUCCESS Hub status is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the hub status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubGetHubStatus (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ OUT UINT32 *HubStatus
+ );
+
+/**
+ Clear specified feature on a given hub port.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Port Usb hub port number (starting from 1).
+ @param Value Feature value that will be cleared from the hub port.
+
+ @retval EFI_SUCCESS Port feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the port feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubClearPortFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Port,
+ IN UINT8 Value
+ );
+
+/**
+ Clear specified feature on a given hub.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value Feature value that will be cleared from the hub port.
+
+ @retval EFI_SUCCESS Hub feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the hub feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubClearHubFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 Value
+ );
+
+/**
+ Get a given hub descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param DescriptorSize The length of Hub Descriptor buffer.
+ @param HubDescriptor Caller allocated buffer to store the hub descriptor if
+ successfully returned.
+
+ @retval EFI_SUCCESS Hub descriptor is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the hub descriptor due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiGetHubDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINTN DescriptorSize,
+ OUT EFI_USB_HUB_DESCRIPTOR *HubDescriptor
+ );
+
+/**
+ Configure a given hub.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param PeiUsbDevice Indicating the hub controller device that will be configured
+
+ @retval EFI_SUCCESS Hub configuration is done successfully.
+ @retval EFI_DEVICE_ERROR Cannot configure the hub due to a hardware error.
+
+**/
+EFI_STATUS
+PeiDoHubConfig (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice
+ );
+
+/**
+ Send reset signal over the given root hub port.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param PortNum Usb hub port number (starting from 1).
+
+**/
+VOID
+PeiResetHubPort (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 PortNum
+ );
+
+#endif
+
+
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c new file mode 100644 index 0000000000..2ac8d7bae3 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c @@ -0,0 +1,333 @@ +/** @file
+Common Libarary for PEI USB
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbPeim.h"
+#include "PeiUsbLib.h"
+
+/**
+ Get a given usb descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value Request Value.
+ @param Index Request Index.
+ @param DescriptorLength Request descriptor Length.
+ @param Descriptor Request descriptor.
+
+
+ @retval EFI_SUCCESS Usb descriptor is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the usb descriptor due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbGetDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 Value,
+ IN UINT16 Index,
+ IN UINT16 DescriptorLength,
+ OUT VOID *Descriptor
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+
+ ASSERT (UsbIoPpi != NULL);
+
+ DevReq.RequestType = USB_DEV_GET_DESCRIPTOR_REQ_TYPE;
+ DevReq.Request = USB_DEV_GET_DESCRIPTOR;
+ DevReq.Value = Value;
+ DevReq.Index = Index;
+ DevReq.Length = DescriptorLength;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbDataIn,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ Descriptor,
+ DescriptorLength
+ );
+}
+
+/**
+ Set a usb device with a specified address.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param AddressValue The address to assign.
+
+ @retval EFI_SUCCESS Usb device address is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb address due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetDeviceAddress (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 AddressValue
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+
+ ASSERT (UsbIoPpi != NULL);
+
+ DevReq.RequestType = USB_DEV_SET_ADDRESS_REQ_TYPE;
+ DevReq.Request = USB_DEV_SET_ADDRESS;
+ DevReq.Value = AddressValue;
+ DevReq.Index = 0;
+ DevReq.Length = 0;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Clear a given usb feature.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Recipient The recipient of ClearFeature Request, should be one of Device/Interface/Endpoint.
+ @param Value Request Value.
+ @param Target Request Index.
+
+ @retval EFI_SUCCESS Usb feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the usb feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearDeviceFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN EFI_USB_RECIPIENT Recipient,
+ IN UINT16 Value,
+ IN UINT16 Target
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+
+ ASSERT (UsbIoPpi != NULL);
+
+ switch (Recipient) {
+ case EfiUsbDevice:
+ DevReq.RequestType = USB_DEV_CLEAR_FEATURE_REQ_TYPE_D;
+ break;
+
+ case EfiUsbInterface:
+ DevReq.RequestType = USB_DEV_CLEAR_FEATURE_REQ_TYPE_I;
+ break;
+
+ case EfiUsbEndpoint:
+ DevReq.RequestType = USB_DEV_CLEAR_FEATURE_REQ_TYPE_E;
+ break;
+ }
+
+ DevReq.Request = USB_DEV_CLEAR_FEATURE;
+ DevReq.Value = Value;
+ DevReq.Index = Target;
+ DevReq.Length = 0;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Configure a usb device to Configuration 1.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is set to use Configuration 1 successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb device due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetConfiguration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi
+ )
+{
+ EFI_USB_DEVICE_REQUEST DevReq;
+ ZeroMem (&DevReq, sizeof (EFI_USB_DEVICE_REQUEST));
+
+ DevReq.RequestType = USB_DEV_SET_CONFIGURATION_REQ_TYPE;
+ DevReq.Request = USB_DEV_SET_CONFIGURATION;
+ DevReq.Value = 1;
+
+ return UsbIoPpi->UsbControlTransfer (
+ PeiServices,
+ UsbIoPpi,
+ &DevReq,
+ EfiUsbNoData,
+ PcdGet32 (PcdUsbTransferTimeoutValue),
+ NULL,
+ 0
+ );
+}
+
+/**
+ Clear Endpoint Halt.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointAddress The endpoint address.
+
+ @retval EFI_SUCCESS Endpoint halt is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the endpoint halt status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearEndpointHalt (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 EndpointAddress
+ )
+{
+ EFI_STATUS Status;
+ PEI_USB_DEVICE *PeiUsbDev;
+ EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDescriptor;
+ UINT8 EndpointIndex;
+
+ EndpointIndex = 0;
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (UsbIoPpi);
+
+ while (EndpointIndex < MAX_ENDPOINT) {
+ Status = UsbIoPpi->UsbGetEndpointDescriptor (PeiServices, UsbIoPpi, EndpointIndex, &EndpointDescriptor);
+ if (EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (EndpointDescriptor->EndpointAddress == EndpointAddress) {
+ break;
+ }
+
+ EndpointIndex++;
+ }
+
+ if (EndpointIndex == MAX_ENDPOINT) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = PeiUsbClearDeviceFeature (
+ PeiServices,
+ UsbIoPpi,
+ EfiUsbEndpoint,
+ EfiUsbEndpointHalt,
+ EndpointAddress
+ );
+
+ //
+ // set data toggle to zero.
+ //
+ if ((PeiUsbDev->DataToggle & (1 << EndpointIndex)) != 0) {
+ PeiUsbDev->DataToggle = (UINT8) (PeiUsbDev->DataToggle ^ (1 << EndpointIndex));
+ }
+
+ return Status;
+}
+
+/**
+ Judge if the port is connected with a usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A usb device is connected with the port.
+ @retval FALSE No usb device is connected with the port.
+
+**/
+BOOLEAN
+IsPortConnect (
+ IN UINT16 PortStatus
+ )
+{
+ //
+ // return the bit 0 value of PortStatus
+ //
+ if ((PortStatus & USB_PORT_STAT_CONNECTION) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Judge if the port is connected with a low-speed usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A low-speed usb device is connected with the port.
+ @retval FALSE No low-speed usb device is connected with the port.
+
+**/
+UINTN
+IsPortLowSpeedDeviceAttached (
+ IN UINT16 PortStatus
+ )
+{
+ //
+ // return the bit 9 value of PortStatus
+ //
+ if ((PortStatus & USB_PORT_STAT_LOW_SPEED) != 0) {
+ return EFI_USB_SPEED_LOW;
+ } else if ((PortStatus & USB_PORT_STAT_HIGH_SPEED) != 0){
+ return EFI_USB_SPEED_HIGH;
+ } else {
+ return EFI_USB_SPEED_FULL;
+ }
+}
+
+/**
+ Judge if the port is in "connection change" status or not.
+
+ @param PortChangeStatus The usb port change status gotten.
+
+ @retval TRUE The port is in "connection change" status.
+ @retval FALSE The port is NOT in "connection change" status.
+
+**/
+BOOLEAN
+IsPortConnectChange (
+ IN UINT16 PortChangeStatus
+ )
+{
+ //
+ // return the bit 0 value of PortChangeStatus
+ //
+ if ((PortChangeStatus & USB_PORT_STAT_C_CONNECTION) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h new file mode 100644 index 0000000000..dd4ce1befc --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h @@ -0,0 +1,250 @@ +/** @file
+Common Libarary for PEI USB
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_LIB_H_
+#define _PEI_USB_LIB_H_
+
+
+//
+// Standard device request and request type
+// By [Spec-USB20/Chapter-9.4]
+//
+#define USB_DEV_GET_STATUS 0x00
+#define USB_DEV_GET_STATUS_REQ_TYPE_D 0x80 // Receiver : Device
+#define USB_DEV_GET_STATUS_REQ_TYPE_I 0x81 // Receiver : Interface
+#define USB_DEV_GET_STATUS_REQ_TYPE_E 0x82 // Receiver : Endpoint
+
+#define USB_DEV_CLEAR_FEATURE 0x01
+#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device
+#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface
+#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint
+
+#define USB_DEV_SET_FEATURE 0x03
+#define USB_DEV_SET_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device
+#define USB_DEV_SET_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface
+#define USB_DEV_SET_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint
+
+#define USB_DEV_SET_ADDRESS 0x05
+#define USB_DEV_SET_ADDRESS_REQ_TYPE 0x00
+
+#define USB_DEV_GET_DESCRIPTOR 0x06
+#define USB_DEV_GET_DESCRIPTOR_REQ_TYPE 0x80
+
+#define USB_DEV_SET_DESCRIPTOR 0x07
+#define USB_DEV_SET_DESCRIPTOR_REQ_TYPE 0x00
+
+#define USB_DEV_GET_CONFIGURATION 0x08
+#define USB_DEV_GET_CONFIGURATION_REQ_TYPE 0x80
+
+#define USB_DEV_SET_CONFIGURATION 0x09
+#define USB_DEV_SET_CONFIGURATION_REQ_TYPE 0x00
+
+#define USB_DEV_GET_INTERFACE 0x0A
+#define USB_DEV_GET_INTERFACE_REQ_TYPE 0x81
+
+#define USB_DEV_SET_INTERFACE 0x0B
+#define USB_DEV_SET_INTERFACE_REQ_TYPE 0x01
+
+#define USB_DEV_SYNCH_FRAME 0x0C
+#define USB_DEV_SYNCH_FRAME_REQ_TYPE 0x82
+
+//
+// USB Descriptor types
+//
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_HUB 0x29
+#define USB_DT_HID 0x21
+
+//
+// USB request type
+//
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+//
+// USB request targer device
+//
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+
+typedef enum {
+ EfiUsbEndpointHalt,
+ EfiUsbDeviceRemoteWakeup
+} EFI_USB_STANDARD_FEATURE_SELECTOR;
+
+//
+// Usb Data recipient type
+//
+typedef enum {
+ EfiUsbDevice,
+ EfiUsbInterface,
+ EfiUsbEndpoint
+} EFI_USB_RECIPIENT;
+
+/**
+ Get a given usb descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Value Request Value.
+ @param Index Request Index.
+ @param DescriptorLength Request descriptor Length.
+ @param Descriptor Request descriptor.
+
+
+ @retval EFI_SUCCESS Usb descriptor is obtained successfully.
+ @retval EFI_DEVICE_ERROR Cannot get the usb descriptor due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbGetDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 Value,
+ IN UINT16 Index,
+ IN UINT16 DescriptorLength,
+ OUT VOID *Descriptor
+ );
+
+/**
+ Set a usb device with a specified address.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param AddressValue The address to assign.
+
+ @retval EFI_SUCCESS Usb device address is set successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb address due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetDeviceAddress (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT16 AddressValue
+ );
+
+/**
+ Clear a given usb feature.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param Recipient The recipient of ClearFeature Request, should be one of Device/Interface/Endpoint.
+ @param Value Request Value.
+ @param Target Request Index.
+
+ @retval EFI_SUCCESS Usb feature is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the usb feature due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearDeviceFeature (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN EFI_USB_RECIPIENT Recipient,
+ IN UINT16 Value,
+ IN UINT16 Target
+ );
+
+/**
+ Configure a usb device to Configuration 1.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is set to use Configuration 1 successfully.
+ @retval EFI_DEVICE_ERROR Cannot set the usb device due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbSetConfiguration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi
+ );
+
+/**
+ Clear Endpoint Halt.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointAddress The endpoint address.
+
+ @retval EFI_SUCCESS Endpoint halt is cleared successfully.
+ @retval EFI_DEVICE_ERROR Cannot clear the endpoint halt status due to a hardware error.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbClearEndpointHalt (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *UsbIoPpi,
+ IN UINT8 EndpointAddress
+ );
+
+/**
+ Judge if the port is connected with a usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A usb device is connected with the port.
+ @retval FALSE No usb device is connected with the port.
+
+**/
+BOOLEAN
+IsPortConnect (
+ IN UINT16 PortStatus
+ );
+
+/**
+ Judge if the port is connected with a low-speed usb device or not.
+
+ @param PortStatus The usb port status gotten.
+
+ @retval TRUE A low-speed usb device is connected with the port.
+ @retval FALSE No low-speed usb device is connected with the port.
+
+**/
+UINTN
+IsPortLowSpeedDeviceAttached (
+ IN UINT16 PortStatus
+ );
+
+/**
+ Judge if the port is in "connection change" status or not.
+
+ @param PortChangeStatus The usb port change status gotten.
+
+ @retval TRUE The port is in "connection change" status.
+ @retval FALSE The port is NOT in "connection change" status.
+
+**/
+BOOLEAN
+IsPortConnectChange (
+ IN UINT16 PortChangeStatus
+ );
+#endif
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf new file mode 100644 index 0000000000..e4a2cb449a --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf @@ -0,0 +1,66 @@ +## @file
+# Component description file for UsbPeim module.
+#
+# Usb Bus Peim driver to support recovery from usb device.
+# Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions
+# of the BSD License which accompanies this distribution. The
+# full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = UsbBusPei
+ FILE_GUID = 8401A045-6F70-4505-8471-7015B40355E3
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = PeimInitializeUsb
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ PeiUsbLib.c
+ HubPeim.c
+ UsbIoPeim.c
+ UsbPeim.c
+ UsbPeim.h
+ PeiUsbLib.h
+ HubPeim.h
+
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ TimerLib
+ BaseMemoryLib
+ PeiServicesLib
+ PeimEntryPoint
+ DebugLib
+ PcdLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUsbTransferTimeoutValue
+
+[Ppis]
+ gPeiUsbIoPpiGuid # PPI ALWAYS_PRODUCED
+ gPeiUsbHostControllerPpiGuid # PPI ALWAYS_CONSUMED
+ gPeiUsb2HostControllerPpiGuid # PPI ALWAYS_CONSUMED
+
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid AND gPeiUsb2HostControllerPpiGuid OR gPeiUsbHostControllerPpiGuid
+
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c new file mode 100644 index 0000000000..897b22896a --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c @@ -0,0 +1,325 @@ +/** @file
+The module is used to implement Usb Io PPI interfaces.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbPeim.h"
+#include "PeiUsbLib.h"
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_IO_PPI.
+ @param Request USB device request to send.
+ @param Direction Specifies the data direction for the data stage.
+ @param Timeout Indicates the maximum timeout, in millisecond.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT32 Timeout,
+ IN OUT VOID *Data, OPTIONAL
+ IN UINTN DataLength OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ PEI_USB_DEVICE *PeiUsbDev;
+ UINT32 TransferResult;
+
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (This);
+
+ if (PeiUsbDev->Usb2HcPpi != NULL) {
+ Status = PeiUsbDev->Usb2HcPpi->ControlTransfer (
+ PeiServices,
+ PeiUsbDev->Usb2HcPpi,
+ PeiUsbDev->DeviceAddress,
+ PeiUsbDev->DeviceSpeed,
+ PeiUsbDev->MaxPacketSize0,
+ Request,
+ Direction,
+ Data,
+ &DataLength,
+ Timeout,
+ &(PeiUsbDev->Translator),
+ &TransferResult
+ );
+ } else {
+ Status = PeiUsbDev->UsbHcPpi->ControlTransfer (
+ PeiServices,
+ PeiUsbDev->UsbHcPpi,
+ PeiUsbDev->DeviceAddress,
+ PeiUsbDev->DeviceSpeed,
+ PeiUsbDev->MaxPacketSize0,
+ Request,
+ Direction,
+ Data,
+ &DataLength,
+ Timeout,
+ &TransferResult
+ );
+ }
+ return Status;
+}
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_IO_PPI.
+ @param DeviceEndpoint Endpoint number and its direction in bit 7.
+ @param Data A pointer to the buffer of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param Timeout Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 DeviceEndpoint,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout
+ )
+{
+ EFI_STATUS Status;
+ PEI_USB_DEVICE *PeiUsbDev;
+ UINT32 TransferResult;
+ UINTN MaxPacketLength;
+ UINT8 DataToggle;
+ UINT8 OldToggle;
+ EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDescriptor;
+ UINT8 EndpointIndex;
+ VOID *Data2[EFI_USB_MAX_BULK_BUFFER_NUM];
+
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (This);
+
+ EndpointDescriptor = NULL;
+ EndpointIndex = 0;
+ Data2[0] = Data;
+ Data2[1] = NULL;
+
+ while (EndpointIndex < MAX_ENDPOINT) {
+ Status = PeiUsbGetEndpointDescriptor (PeiServices, This, EndpointIndex, &EndpointDescriptor);
+ if (EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (EndpointDescriptor->EndpointAddress == DeviceEndpoint) {
+ break;
+ }
+
+ EndpointIndex++;
+ }
+
+ if (EndpointIndex == MAX_ENDPOINT) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ MaxPacketLength = PeiUsbDev->EndpointDesc[EndpointIndex]->MaxPacketSize;
+ if ((PeiUsbDev->DataToggle & (1 << EndpointIndex)) != 0) {
+ DataToggle = 1;
+ } else {
+ DataToggle = 0;
+ }
+
+ OldToggle = DataToggle;
+
+ if (PeiUsbDev->Usb2HcPpi != NULL) {
+ Status = PeiUsbDev->Usb2HcPpi->BulkTransfer (
+ PeiServices,
+ PeiUsbDev->Usb2HcPpi,
+ PeiUsbDev->DeviceAddress,
+ DeviceEndpoint,
+ PeiUsbDev->DeviceSpeed,
+ MaxPacketLength,
+ Data2,
+ DataLength,
+ &DataToggle,
+ Timeout,
+ &(PeiUsbDev->Translator),
+ &TransferResult
+ );
+ } else {
+ Status = PeiUsbDev->UsbHcPpi->BulkTransfer (
+ PeiServices,
+ PeiUsbDev->UsbHcPpi,
+ PeiUsbDev->DeviceAddress,
+ DeviceEndpoint,
+ (UINT8) MaxPacketLength,
+ Data,
+ DataLength,
+ &DataToggle,
+ Timeout,
+ &TransferResult
+ );
+ }
+
+ if (OldToggle != DataToggle) {
+ PeiUsbDev->DataToggle = (UINT8) (PeiUsbDev->DataToggle ^ (1 << EndpointIndex));
+ }
+
+ return Status;
+}
+
+/**
+ Get the usb interface descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+ @param InterfaceDescriptor Request interface descriptor.
+
+
+ @retval EFI_SUCCESS Usb interface descriptor is obtained successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbGetInterfaceDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ OUT EFI_USB_INTERFACE_DESCRIPTOR **InterfaceDescriptor
+ )
+{
+ PEI_USB_DEVICE *PeiUsbDev;
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (This);
+ *InterfaceDescriptor = PeiUsbDev->InterfaceDesc;
+ return EFI_SUCCESS;
+}
+
+/**
+ Get the usb endpoint descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointIndex The valid index of the specified endpoint.
+ @param EndpointDescriptor Request endpoint descriptor.
+
+ @retval EFI_SUCCESS Usb endpoint descriptor is obtained successfully.
+ @retval EFI_NOT_FOUND Usb endpoint descriptor is NOT found.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbGetEndpointDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 EndpointIndex,
+ OUT EFI_USB_ENDPOINT_DESCRIPTOR **EndpointDescriptor
+ )
+{
+ PEI_USB_DEVICE *PeiUsbDev;
+
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (This);
+
+ ASSERT (EndpointDescriptor != NULL);
+
+ //
+ // The valid range of EndpointIndex is 0..15
+ // If EndpointIndex is lesser than 15 but larger than the number of interfaces,
+ // a EFI_NOT_FOUND should be returned
+ //
+ ASSERT (EndpointIndex <= 15);
+
+ if (EndpointIndex >= PeiUsbDev->InterfaceDesc->NumEndpoints) {
+ return EFI_NOT_FOUND;
+ }
+
+ *EndpointDescriptor = PeiUsbDev->EndpointDesc[EndpointIndex];
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reset the port and re-configure the usb device.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is reset and configured successfully.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbPortReset (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This
+ )
+{
+ PEI_USB_DEVICE *PeiUsbDev;
+ EFI_STATUS Status;
+ UINT8 Address;
+
+ PeiUsbDev = PEI_USB_DEVICE_FROM_THIS (This);
+
+ ResetRootPort (
+ PeiServices,
+ PeiUsbDev->UsbHcPpi,
+ PeiUsbDev->Usb2HcPpi,
+ PeiUsbDev->DeviceAddress,
+ 0
+ );
+
+ //
+ // Set address
+ //
+ Address = PeiUsbDev->DeviceAddress;
+ PeiUsbDev->DeviceAddress = 0;
+
+ Status = PeiUsbSetDeviceAddress (
+ PeiServices,
+ This,
+ Address
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PeiUsbDev->DeviceAddress = Address;
+
+ //
+ // Set default configuration
+ //
+ Status = PeiUsbSetConfiguration (
+ PeiServices,
+ This
+ );
+
+ return Status;
+}
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c new file mode 100644 index 0000000000..4a5d8e8bc4 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c @@ -0,0 +1,1041 @@ +/** @file
+The module to produce Usb Bus PPI.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UsbPeim.h"
+#include "HubPeim.h"
+#include "PeiUsbLib.h"
+
+//
+// UsbIo PPI interface function
+//
+PEI_USB_IO_PPI mUsbIoPpi = {
+ PeiUsbControlTransfer,
+ PeiUsbBulkTransfer,
+ PeiUsbGetInterfaceDescriptor,
+ PeiUsbGetEndpointDescriptor,
+ PeiUsbPortReset
+};
+
+EFI_PEI_PPI_DESCRIPTOR mUsbIoPpiList = {
+ (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gPeiUsbIoPpiGuid,
+ NULL
+};
+
+/**
+ The enumeration routine to detect device change.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
+ @param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
+
+ @retval EFI_SUCCESS The usb is enumerated successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbEnumeration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi
+ );
+
+/**
+ Configure new detected usb device.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
+ @param Port The port to be configured.
+ @param DeviceAddress The device address to be configured.
+
+ @retval EFI_SUCCESS The new detected usb device is configured successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiConfigureUsbDevice (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice,
+ IN UINT8 Port,
+ IN OUT UINT8 *DeviceAddress
+ );
+
+/**
+ Get all configurations from a detected usb device.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
+
+ @retval EFI_SUCCESS The new detected usb device is configured successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbGetAllConfiguration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice
+ );
+
+/**
+ Get the start position of next wanted descriptor.
+
+ @param Buffer Buffer containing data to parse.
+ @param Length Buffer length.
+ @param DescType Descriptor type.
+ @param DescLength Descriptor length.
+ @param ParsedBytes Bytes has been parsed.
+
+ @retval EFI_SUCCESS Get wanted descriptor successfully.
+ @retval EFI_DEVICE_ERROR Error occurred.
+
+**/
+EFI_STATUS
+GetExpectedDescriptor (
+ IN UINT8 *Buffer,
+ IN UINTN Length,
+ IN UINT8 DescType,
+ IN UINT8 DescLength,
+ OUT UINTN *ParsedBytes
+ );
+
+/**
+ The entrypoint of the module, it will enumerate all HCs.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCCESS Usb initialization is done successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval EFI_UNSUPPORTED Can't find required PPI.
+
+**/
+EFI_STATUS
+EFIAPI
+PeimInitializeUsb (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+ UINTN Index;
+ PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi;
+ PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi;
+
+ if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // gPeiUsbHostControllerPpiGuid and gPeiUsb2HostControllerPpiGuid should not
+ // be produced at the same time
+ //
+ Index = 0;
+ while (TRUE) {
+ //
+ // Get UsbHcPpi at first.
+ //
+ Status = PeiServicesLocatePpi (
+ &gPeiUsbHostControllerPpiGuid,
+ Index,
+ NULL,
+ (VOID **) &UsbHcPpi
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // No more host controller, break out
+ //
+ break;
+ }
+ PeiUsbEnumeration ((EFI_PEI_SERVICES **) PeiServices, UsbHcPpi, NULL);
+ Index++;
+ }
+
+ if (Index == 0) {
+ //
+ // Then try to get Usb2HcPpi.
+ //
+ while (TRUE) {
+ Status = PeiServicesLocatePpi (
+ &gPeiUsb2HostControllerPpiGuid,
+ Index,
+ NULL,
+ (VOID **) &Usb2HcPpi
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // No more host controller, break out
+ //
+ break;
+ }
+ PeiUsbEnumeration ((EFI_PEI_SERVICES **) PeiServices, NULL, Usb2HcPpi);
+ Index++;
+ }
+ }
+
+ if (Index == 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ The Hub Enumeration just scans the hub ports one time. It also
+ doesn't support hot-plug.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
+ @param CurrentAddress The DeviceAddress of usb device.
+
+ @retval EFI_SUCCESS The usb hub is enumerated successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiHubEnumeration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice,
+ IN UINT8 *CurrentAddress
+ )
+{
+ UINTN Index;
+ EFI_STATUS Status;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ EFI_USB_PORT_STATUS PortStatus;
+ UINTN MemPages;
+ EFI_PHYSICAL_ADDRESS AllocateAddress;
+ PEI_USB_DEVICE *NewPeiUsbDevice;
+
+
+ UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
+
+ for (Index = 0; Index < PeiUsbDevice->DownStreamPortNo; Index++) {
+
+ Status = PeiHubGetPortStatus (
+ PeiServices,
+ UsbIoPpi,
+ (UINT8) (Index + 1),
+ (UINT32 *) &PortStatus
+ );
+
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ if (IsPortConnectChange (PortStatus.PortChangeStatus)) {
+ PeiHubClearPortFeature (
+ PeiServices,
+ UsbIoPpi,
+ (UINT8) (Index + 1),
+ EfiUsbPortConnectChange
+ );
+
+ MicroSecondDelay (100 * 1000);
+
+ if (IsPortConnect (PortStatus.PortStatus)) {
+
+ PeiHubGetPortStatus (
+ PeiServices,
+ UsbIoPpi,
+ (UINT8) (Index + 1),
+ (UINT32 *) &PortStatus
+ );
+
+ //
+ // Begin to deal with the new device
+ //
+ MemPages = sizeof (PEI_USB_DEVICE) / EFI_PAGE_SIZE + 1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ MemPages,
+ &AllocateAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ NewPeiUsbDevice = (PEI_USB_DEVICE *) ((UINTN) AllocateAddress);
+ ZeroMem (NewPeiUsbDevice, sizeof (PEI_USB_DEVICE));
+
+ NewPeiUsbDevice->Signature = PEI_USB_DEVICE_SIGNATURE;
+ NewPeiUsbDevice->DeviceAddress = 0;
+ NewPeiUsbDevice->MaxPacketSize0 = 8;
+ NewPeiUsbDevice->DataToggle = 0;
+ CopyMem (
+ &(NewPeiUsbDevice->UsbIoPpi),
+ &mUsbIoPpi,
+ sizeof (PEI_USB_IO_PPI)
+ );
+ CopyMem (
+ &(NewPeiUsbDevice->UsbIoPpiList),
+ &mUsbIoPpiList,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ NewPeiUsbDevice->UsbIoPpiList.Ppi = &NewPeiUsbDevice->UsbIoPpi;
+ NewPeiUsbDevice->AllocateAddress = (UINTN) AllocateAddress;
+ NewPeiUsbDevice->UsbHcPpi = PeiUsbDevice->UsbHcPpi;
+ NewPeiUsbDevice->Usb2HcPpi = PeiUsbDevice->Usb2HcPpi;
+ NewPeiUsbDevice->IsHub = 0x0;
+ NewPeiUsbDevice->DownStreamPortNo = 0x0;
+
+ PeiResetHubPort (PeiServices, UsbIoPpi, (UINT8)(Index + 1));
+
+ PeiHubGetPortStatus (
+ PeiServices,
+ UsbIoPpi,
+ (UINT8) (Index + 1),
+ (UINT32 *) &PortStatus
+ );
+
+ NewPeiUsbDevice->DeviceSpeed = (UINT8)IsPortLowSpeedDeviceAttached (PortStatus.PortStatus);
+
+ if(NewPeiUsbDevice->DeviceSpeed != EFI_USB_SPEED_HIGH) {
+ if (PeiUsbDevice->DeviceSpeed == EFI_USB_SPEED_HIGH) {
+ NewPeiUsbDevice->Translator.TranslatorPortNumber = (UINT8)Index;
+ NewPeiUsbDevice->Translator.TranslatorHubAddress = *CurrentAddress;
+ } else {
+ CopyMem(&(NewPeiUsbDevice->Translator), &(PeiUsbDevice->Translator), sizeof(EFI_USB2_HC_TRANSACTION_TRANSLATOR));
+ }
+ }
+
+ //
+ // Configure that Usb Device
+ //
+ Status = PeiConfigureUsbDevice (
+ PeiServices,
+ NewPeiUsbDevice,
+ (UINT8) (Index + 1),
+ CurrentAddress
+ );
+
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ Status = PeiServicesInstallPpi (&NewPeiUsbDevice->UsbIoPpiList);
+
+ if (NewPeiUsbDevice->InterfaceDesc->InterfaceClass == 0x09) {
+ NewPeiUsbDevice->IsHub = 0x1;
+
+ Status = PeiDoHubConfig (PeiServices, NewPeiUsbDevice);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PeiHubEnumeration (PeiServices, NewPeiUsbDevice, CurrentAddress);
+ }
+ }
+
+ }
+ }
+
+
+ return EFI_SUCCESS;
+}
+
+/**
+ The enumeration routine to detect device change.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
+ @param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
+
+ @retval EFI_SUCCESS The usb is enumerated successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbEnumeration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi
+ )
+{
+ UINT8 NumOfRootPort;
+ EFI_STATUS Status;
+ UINT8 Index;
+ EFI_USB_PORT_STATUS PortStatus;
+ PEI_USB_DEVICE *PeiUsbDevice;
+ UINTN MemPages;
+ EFI_PHYSICAL_ADDRESS AllocateAddress;
+ UINT8 CurrentAddress;
+
+
+ CurrentAddress = 0;
+ if (Usb2HcPpi != NULL){
+ Usb2HcPpi->GetRootHubPortNumber (
+ PeiServices,
+ Usb2HcPpi,
+ (UINT8 *) &NumOfRootPort
+ );
+ } else {
+ UsbHcPpi->GetRootHubPortNumber (
+ PeiServices,
+ UsbHcPpi,
+ (UINT8 *) &NumOfRootPort
+ );
+ }
+
+ for (Index = 0; Index < NumOfRootPort; Index++) {
+ //
+ // First get root port status to detect changes happen
+ //
+ if (Usb2HcPpi != NULL) {
+ Usb2HcPpi->GetRootHubPortStatus (
+ PeiServices,
+ Usb2HcPpi,
+ (UINT8) Index,
+ &PortStatus
+ );
+ } else {
+ UsbHcPpi->GetRootHubPortStatus (
+ PeiServices,
+ UsbHcPpi,
+ (UINT8) Index,
+ &PortStatus
+ );
+ }
+ DEBUG ((EFI_D_INFO, "USB Status --- ConnectChange[%04x] Status[%04x]\n", PortStatus.PortChangeStatus, PortStatus.PortStatus));
+ if (IsPortConnectChange (PortStatus.PortChangeStatus)) {
+ //
+ // Changes happen, first clear this change status
+ //
+ if (Usb2HcPpi != NULL) {
+ Usb2HcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ Usb2HcPpi,
+ (UINT8) Index,
+ EfiUsbPortConnectChange
+ );
+ } else {
+ UsbHcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ UsbHcPpi,
+ (UINT8) Index,
+ EfiUsbPortConnectChange
+ );
+ }
+ MicroSecondDelay (100 * 1000);
+
+ if (IsPortConnect (PortStatus.PortStatus)) {
+ if (Usb2HcPpi != NULL) {
+ Usb2HcPpi->GetRootHubPortStatus (
+ PeiServices,
+ Usb2HcPpi,
+ (UINT8) Index,
+ &PortStatus
+ );
+ } else {
+ UsbHcPpi->GetRootHubPortStatus (
+ PeiServices,
+ UsbHcPpi,
+ (UINT8) Index,
+ &PortStatus
+ );
+ }
+
+ //
+ // Connect change happen
+ //
+ MemPages = sizeof (PEI_USB_DEVICE) / EFI_PAGE_SIZE + 1;
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ MemPages,
+ &AllocateAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PeiUsbDevice = (PEI_USB_DEVICE *) ((UINTN) AllocateAddress);
+ ZeroMem (PeiUsbDevice, sizeof (PEI_USB_DEVICE));
+
+ PeiUsbDevice->Signature = PEI_USB_DEVICE_SIGNATURE;
+ PeiUsbDevice->DeviceAddress = 0;
+ PeiUsbDevice->MaxPacketSize0 = 8;
+ PeiUsbDevice->DataToggle = 0;
+ CopyMem (
+ &(PeiUsbDevice->UsbIoPpi),
+ &mUsbIoPpi,
+ sizeof (PEI_USB_IO_PPI)
+ );
+ CopyMem (
+ &(PeiUsbDevice->UsbIoPpiList),
+ &mUsbIoPpiList,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ PeiUsbDevice->UsbIoPpiList.Ppi = &PeiUsbDevice->UsbIoPpi;
+ PeiUsbDevice->AllocateAddress = (UINTN) AllocateAddress;
+ PeiUsbDevice->UsbHcPpi = UsbHcPpi;
+ PeiUsbDevice->Usb2HcPpi = Usb2HcPpi;
+ PeiUsbDevice->IsHub = 0x0;
+ PeiUsbDevice->DownStreamPortNo = 0x0;
+
+ ResetRootPort (
+ PeiServices,
+ PeiUsbDevice->UsbHcPpi,
+ PeiUsbDevice->Usb2HcPpi,
+ Index,
+ 0
+ );
+
+ if (Usb2HcPpi != NULL) {
+ Usb2HcPpi->GetRootHubPortStatus (
+ PeiServices,
+ Usb2HcPpi,
+ (UINT8) Index,
+ &PortStatus
+ );
+ } else {
+ UsbHcPpi->GetRootHubPortStatus (
+ PeiServices,
+ UsbHcPpi,
+ (UINT8) Index,
+ &PortStatus
+ );
+ }
+
+ PeiUsbDevice->DeviceSpeed = (UINT8)IsPortLowSpeedDeviceAttached (PortStatus.PortStatus);
+ DEBUG ((EFI_D_INFO, "Device Speed =%d\n", PeiUsbDevice->DeviceSpeed));
+
+ //
+ // Configure that Usb Device
+ //
+ Status = PeiConfigureUsbDevice (
+ PeiServices,
+ PeiUsbDevice,
+ Index,
+ &CurrentAddress
+ );
+
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ DEBUG ((EFI_D_INFO, "PeiConfigureUsbDevice Success\n"));
+
+ Status = PeiServicesInstallPpi (&PeiUsbDevice->UsbIoPpiList);
+
+ if (PeiUsbDevice->InterfaceDesc->InterfaceClass == 0x09) {
+ PeiUsbDevice->IsHub = 0x1;
+
+ Status = PeiDoHubConfig (PeiServices, PeiUsbDevice);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PeiHubEnumeration (PeiServices, PeiUsbDevice, &CurrentAddress);
+ }
+ } else {
+ //
+ // Disconnect change happen, currently we don't support
+ //
+ }
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Configure new detected usb device.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
+ @param Port The port to be configured.
+ @param DeviceAddress The device address to be configured.
+
+ @retval EFI_SUCCESS The new detected usb device is configured successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiConfigureUsbDevice (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice,
+ IN UINT8 Port,
+ IN OUT UINT8 *DeviceAddress
+ )
+{
+ EFI_USB_DEVICE_DESCRIPTOR DeviceDescriptor;
+ EFI_STATUS Status;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ UINT8 Retry;
+
+ UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
+ Status = EFI_SUCCESS;
+ ZeroMem (&DeviceDescriptor, sizeof (EFI_USB_DEVICE_DESCRIPTOR));
+ //
+ // Get USB device descriptor
+ //
+
+ for (Retry = 0; Retry < 3; Retry ++) {
+
+ PeiUsbDevice->MaxPacketSize0 = 8;
+
+ Status = PeiUsbGetDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ (USB_DT_DEVICE << 8),
+ 0,
+ 8,
+ &DeviceDescriptor
+ );
+
+ if (!EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_INFO, "PeiUsbGet Device Descriptor the %d time Sucess\n", Retry));
+ break;
+ }
+ }
+
+ if (Retry == 3) {
+ DEBUG ((EFI_D_ERROR, "PeiUsbGet Device Descriptor fail\n", Retry));
+ return Status;
+ }
+
+ PeiUsbDevice->MaxPacketSize0 = DeviceDescriptor.MaxPacketSize0;
+
+ (*DeviceAddress) ++;
+
+ Status = PeiUsbSetDeviceAddress (
+ PeiServices,
+ UsbIoPpi,
+ *DeviceAddress
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "PeiUsbSetDeviceAddress Failed\n"));
+ return Status;
+ }
+
+ PeiUsbDevice->DeviceAddress = *DeviceAddress;
+
+ //
+ // Get whole USB device descriptor
+ //
+ Status = PeiUsbGetDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ (USB_DT_DEVICE << 8),
+ 0,
+ (UINT16) sizeof (EFI_USB_DEVICE_DESCRIPTOR),
+ &DeviceDescriptor
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "PeiUsbGetDescriptor First Failed\n"));
+ return Status;
+ }
+ //
+ // Get its default configuration and its first interface
+ //
+ Status = PeiUsbGetAllConfiguration (
+ PeiServices,
+ PeiUsbDevice
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = PeiUsbSetConfiguration (
+ PeiServices,
+ UsbIoPpi
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Get all configurations from a detected usb device.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
+
+ @retval EFI_SUCCESS The new detected usb device is configured successfully.
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+PeiUsbGetAllConfiguration (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_DEVICE *PeiUsbDevice
+ )
+{
+ EFI_STATUS Status;
+ EFI_USB_CONFIG_DESCRIPTOR *ConfigDesc;
+ PEI_USB_IO_PPI *UsbIoPpi;
+ UINT16 ConfigDescLength;
+ UINT8 *Ptr;
+ UINTN SkipBytes;
+ UINTN LengthLeft;
+ UINTN Index;
+ UINTN NumOfEndpoint;
+
+ UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
+
+ //
+ // First get its 4-byte configuration descriptor
+ //
+ Status = PeiUsbGetDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ (USB_DT_CONFIG << 8), // Value
+ 0, // Index
+ 4, // Length
+ PeiUsbDevice->ConfigurationData
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "PeiUsbGet Config Descriptor First Failed\n"));
+ return Status;
+ }
+
+ ConfigDesc = (EFI_USB_CONFIG_DESCRIPTOR *) PeiUsbDevice->ConfigurationData;
+ ConfigDescLength = ConfigDesc->TotalLength;
+
+ //
+ // Then we get the total descriptors for this configuration
+ //
+ Status = PeiUsbGetDescriptor (
+ PeiServices,
+ UsbIoPpi,
+ (USB_DT_CONFIG << 8),
+ 0,
+ ConfigDescLength,
+ PeiUsbDevice->ConfigurationData
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "PeiUsbGet Config Descriptor all Failed\n"));
+ return Status;
+ }
+ //
+ // Parse this configuration descriptor
+ // First get the current config descriptor;
+ //
+ Status = GetExpectedDescriptor (
+ PeiUsbDevice->ConfigurationData,
+ ConfigDescLength,
+ USB_DT_CONFIG,
+ (UINT8) sizeof (EFI_USB_CONFIG_DESCRIPTOR),
+ &SkipBytes
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Ptr = PeiUsbDevice->ConfigurationData + SkipBytes;
+ PeiUsbDevice->ConfigDesc = (EFI_USB_CONFIG_DESCRIPTOR *) Ptr;
+
+ Ptr += sizeof (EFI_USB_CONFIG_DESCRIPTOR);
+ LengthLeft = ConfigDescLength - SkipBytes - sizeof (EFI_USB_CONFIG_DESCRIPTOR);
+
+ //
+ // Get the first interface descriptor
+ //
+ Status = GetExpectedDescriptor (
+ Ptr,
+ LengthLeft,
+ USB_DT_INTERFACE,
+ (UINT8) sizeof (EFI_USB_INTERFACE_DESCRIPTOR),
+ &SkipBytes
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Ptr += SkipBytes;
+ PeiUsbDevice->InterfaceDesc = (EFI_USB_INTERFACE_DESCRIPTOR *) Ptr;
+
+ Ptr += sizeof (EFI_USB_INTERFACE_DESCRIPTOR);
+ LengthLeft -= SkipBytes;
+ LengthLeft -= sizeof (EFI_USB_INTERFACE_DESCRIPTOR);
+
+ //
+ // Parse all the endpoint descriptor within this interface
+ //
+ NumOfEndpoint = PeiUsbDevice->InterfaceDesc->NumEndpoints;
+ ASSERT (NumOfEndpoint <= MAX_ENDPOINT);
+
+ for (Index = 0; Index < NumOfEndpoint; Index++) {
+ //
+ // Get the endpoint descriptor
+ //
+ Status = GetExpectedDescriptor (
+ Ptr,
+ LengthLeft,
+ USB_DT_ENDPOINT,
+ (UINT8) sizeof (EFI_USB_ENDPOINT_DESCRIPTOR),
+ &SkipBytes
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Ptr += SkipBytes;
+ PeiUsbDevice->EndpointDesc[Index] = (EFI_USB_ENDPOINT_DESCRIPTOR *) Ptr;
+
+ Ptr += sizeof (EFI_USB_ENDPOINT_DESCRIPTOR);
+ LengthLeft -= SkipBytes;
+ LengthLeft -= sizeof (EFI_USB_ENDPOINT_DESCRIPTOR);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Get the start position of next wanted descriptor.
+
+ @param Buffer Buffer containing data to parse.
+ @param Length Buffer length.
+ @param DescType Descriptor type.
+ @param DescLength Descriptor length.
+ @param ParsedBytes Bytes has been parsed.
+
+ @retval EFI_SUCCESS Get wanted descriptor successfully.
+ @retval EFI_DEVICE_ERROR Error occurred.
+
+**/
+EFI_STATUS
+GetExpectedDescriptor (
+ IN UINT8 *Buffer,
+ IN UINTN Length,
+ IN UINT8 DescType,
+ IN UINT8 DescLength,
+ OUT UINTN *ParsedBytes
+ )
+{
+ UINT16 DescriptorHeader;
+ UINT8 Len;
+ UINT8 *Ptr;
+ UINTN Parsed;
+
+ Parsed = 0;
+ Ptr = Buffer;
+
+ while (TRUE) {
+ //
+ // Buffer length should not less than Desc length
+ //
+ if (Length < DescLength) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ DescriptorHeader = (UINT16) (*Ptr + ((*(Ptr + 1)) << 8));
+
+ Len = Buffer[0];
+
+ //
+ // Check to see if it is a start of expected descriptor
+ //
+ if (DescriptorHeader == ((DescType << 8) | DescLength)) {
+ break;
+ }
+
+ if ((UINT8) (DescriptorHeader >> 8) == DescType) {
+ if (Len > DescLength) {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+ //
+ // Descriptor length should be at least 2
+ // and should not exceed the buffer length
+ //
+ if (Len < 2) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (Len > Length) {
+ return EFI_DEVICE_ERROR;
+ }
+ //
+ // Skip this mismatch descriptor
+ //
+ Length -= Len;
+ Ptr += Len;
+ Parsed += Len;
+ }
+
+ *ParsedBytes = Parsed;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Send reset signal over the given root hub port.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
+ @param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
+ @param PortNum The port to be reset.
+ @param RetryIndex The retry times.
+
+**/
+VOID
+ResetRootPort (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi,
+ IN UINT8 PortNum,
+ IN UINT8 RetryIndex
+ )
+{
+ EFI_STATUS Status;
+
+
+ if (Usb2HcPpi != NULL) {
+ MicroSecondDelay (200 * 1000);
+
+ //
+ // reset root port
+ //
+ Status = Usb2HcPpi->SetRootHubPortFeature (
+ PeiServices,
+ Usb2HcPpi,
+ PortNum,
+ EfiUsbPortReset
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "SetRootHubPortFeature EfiUsbPortReset Failed\n"));
+ return;
+ }
+
+ MicroSecondDelay (200 * 1000);
+
+ //
+ // clear reset root port
+ //
+ Status = Usb2HcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ Usb2HcPpi,
+ PortNum,
+ EfiUsbPortReset
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "ClearRootHubPortFeature EfiUsbPortReset Failed\n"));
+ return;
+ }
+
+ MicroSecondDelay (1 * 1000);
+
+ Usb2HcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ Usb2HcPpi,
+ PortNum,
+ EfiUsbPortConnectChange
+ );
+
+ //
+ // Set port enable
+ //
+ Usb2HcPpi->SetRootHubPortFeature(
+ PeiServices,
+ Usb2HcPpi,
+ PortNum,
+ EfiUsbPortEnable
+ );
+
+ Usb2HcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ Usb2HcPpi,
+ PortNum,
+ EfiUsbPortEnableChange
+ );
+
+ MicroSecondDelay ((RetryIndex + 1) * 50 * 1000);
+ } else {
+ MicroSecondDelay (200 * 1000);
+
+ //
+ // reset root port
+ //
+ Status = UsbHcPpi->SetRootHubPortFeature (
+ PeiServices,
+ UsbHcPpi,
+ PortNum,
+ EfiUsbPortReset
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "SetRootHubPortFeature EfiUsbPortReset Failed\n"));
+ return;
+ }
+
+ MicroSecondDelay (200 * 1000);
+
+ //
+ // clear reset root port
+ //
+ Status = UsbHcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ UsbHcPpi,
+ PortNum,
+ EfiUsbPortReset
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "ClearRootHubPortFeature EfiUsbPortReset Failed\n"));
+ return;
+ }
+
+ MicroSecondDelay (1 * 1000);
+
+ UsbHcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ UsbHcPpi,
+ PortNum,
+ EfiUsbPortConnectChange
+ );
+
+ //
+ // Set port enable
+ //
+ UsbHcPpi->SetRootHubPortFeature(
+ PeiServices,
+ UsbHcPpi,
+ PortNum,
+ EfiUsbPortEnable
+ );
+
+ UsbHcPpi->ClearRootHubPortFeature (
+ PeiServices,
+ UsbHcPpi,
+ PortNum,
+ EfiUsbPortEnableChange
+ );
+
+ MicroSecondDelay ((RetryIndex + 1) * 50 * 1000);
+ }
+ return;
+}
+
+
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h new file mode 100644 index 0000000000..c9e75bad53 --- /dev/null +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h @@ -0,0 +1,203 @@ +/** @file
+Usb Peim definition.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_PEIM_H_
+#define _PEI_USB_PEIM_H_
+
+
+#include <PiPei.h>
+
+#include <Ppi/UsbHostController.h>
+#include <Ppi/Usb2HostController.h>
+#include <Ppi/UsbIo.h>
+
+#include <Library/DebugLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/TimerLib.h>
+#include <Library/PcdLib.h>
+
+#include <IndustryStandard/Usb.h>
+
+#define MAX_ROOT_PORT 2
+#define MAX_ENDPOINT 16
+
+#define USB_SLOW_SPEED_DEVICE 0x01
+#define USB_FULL_SPEED_DEVICE 0x02
+
+#define PEI_USB_DEVICE_SIGNATURE SIGNATURE_32 ('U', 's', 'b', 'D')
+typedef struct {
+ UINTN Signature;
+ PEI_USB_IO_PPI UsbIoPpi;
+ EFI_PEI_PPI_DESCRIPTOR UsbIoPpiList;
+ UINT8 DeviceAddress;
+ UINT8 MaxPacketSize0;
+ UINT8 DeviceSpeed;
+ UINT8 DataToggle;
+ UINT8 IsHub;
+ UINT8 DownStreamPortNo;
+ UINT8 Reserved[2]; // Padding for IPF
+ UINTN AllocateAddress;
+ PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi;
+ PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi;
+ UINT8 ConfigurationData[1024];
+ EFI_USB_CONFIG_DESCRIPTOR *ConfigDesc;
+ EFI_USB_INTERFACE_DESCRIPTOR *InterfaceDesc;
+ EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDesc[MAX_ENDPOINT];
+ EFI_USB2_HC_TRANSACTION_TRANSLATOR Translator;
+} PEI_USB_DEVICE;
+
+#define PEI_USB_DEVICE_FROM_THIS(a) CR (a, PEI_USB_DEVICE, UsbIoPpi, PEI_USB_DEVICE_SIGNATURE)
+
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_IO_PPI.
+ @param Request USB device request to send.
+ @param Direction Specifies the data direction for the data stage.
+ @param Timeout Indicates the maximum timeout, in millisecond.
+ @param Data Data buffer to be transmitted or received from USB device.
+ @param DataLength The size (in bytes) of the data buffer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbControlTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT32 Timeout,
+ IN OUT VOID *Data, OPTIONAL
+ IN UINTN DataLength OPTIONAL
+ );
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param PeiServices The pointer of EFI_PEI_SERVICES.
+ @param This The pointer of PEI_USB_IO_PPI.
+ @param DeviceEndpoint Endpoint number and its direction in bit 7.
+ @param Data A pointer to the buffer of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param Timeout Indicates the maximum time, in millisecond, which the
+ transfer is allowed to complete.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbBulkTransfer (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 DeviceEndpoint,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout
+ );
+
+/**
+ Get the usb interface descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+ @param InterfaceDescriptor Request interface descriptor.
+
+
+ @retval EFI_SUCCESS Usb interface descriptor is obtained successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbGetInterfaceDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ OUT EFI_USB_INTERFACE_DESCRIPTOR **InterfaceDescriptor
+ );
+
+/**
+ Get the usb endpoint descriptor.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+ @param EndpointIndex The valid index of the specified endpoint.
+ @param EndpointDescriptor Request endpoint descriptor.
+
+ @retval EFI_SUCCESS Usb endpoint descriptor is obtained successfully.
+ @retval EFI_NOT_FOUND Usb endpoint descriptor is NOT found.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbGetEndpointDescriptor (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 EndpointIndex,
+ OUT EFI_USB_ENDPOINT_DESCRIPTOR **EndpointDescriptor
+ );
+
+/**
+ Reset the port and re-configure the usb device.
+
+ @param PeiServices General-purpose services that are available to every PEIM.
+ @param This Indicates the PEI_USB_IO_PPI instance.
+
+ @retval EFI_SUCCESS Usb device is reset and configured successfully.
+ @retval Others Other failure occurs.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiUsbPortReset (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This
+ );
+
+/**
+ Send reset signal over the given root hub port.
+
+ @param PeiServices Describes the list of possible PEI Services.
+ @param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
+ @param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
+ @param PortNum The port to be reset.
+ @param RetryIndex The retry times.
+
+**/
+VOID
+ResetRootPort (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi,
+ IN UINT8 PortNum,
+ IN UINT8 RetryIndex
+ );
+
+#endif
diff --git a/MdeModulePkg/Include/Ppi/Usb2HostController.h b/MdeModulePkg/Include/Ppi/Usb2HostController.h new file mode 100644 index 0000000000..e6d00ee92e --- /dev/null +++ b/MdeModulePkg/Include/Ppi/Usb2HostController.h @@ -0,0 +1,263 @@ +/** @file
+ Defines the USB Host Controller PPI that provides I/O services for a USB Host
+ Controller that may be used to access recovery devices. These interfaces are
+ modeled on the UEFI 2.3 specification EFI_USB2_HOST_CONTROLLER_PROTOCOL.
+ Refer to section 16.1 of the UEFI 2.3 Specification for more information on
+ these interfaces.
+
+Copyright (c) 2010, Intel Corporation. All rights reserved. <BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB2_HOST_CONTROLLER_PPI_H_
+#define _PEI_USB2_HOST_CONTROLLER_PPI_H_
+
+#include <Protocol/Usb2HostController.h>
+
+///
+/// Global ID for the PEI_USB2_HOST_CONTROLLER_PPI.
+///
+#define PEI_USB2_HOST_CONTROLLER_PPI_GUID \
+ { \
+ 0xa7d09fe1, 0x74d4, 0x4ba5, { 0x84, 0x7c, 0x12, 0xed, 0x5b, 0x19, 0xad, 0xe4 } \
+ }
+
+///
+/// Forward declaration for the PEI_USB2_HOST_CONTROLLER_PPI.
+///
+typedef struct _PEI_USB2_HOST_CONTROLLER_PPI PEI_USB2_HOST_CONTROLLER_PPI;
+
+/**
+ Initiate a USB control transfer using a specific USB Host controller on the USB bus.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[in] DeviceAddress Represents the address of the target device
+ on the USB.
+ @param[in] DeviceSpeed Indicates device speed.
+ @param[in] MaximumPacketLength Indicates the maximum packet size that the
+ default control transfer
+ endpoint is capable of sending or receiving.
+ @param[in] Request A pointer to the USB device request that
+ will be sent to the USB device.
+ @param[in] TransferDirection Specifies the data direction for the transfer.
+ There are three values available:
+ EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
+ @param[in,out] Data A pointer to the buffer of data that will
+ be transmitted to USB device or
+ received from USB device.
+ @param[in,out] DataLength On input, indicates the size, in bytes, of
+ the data buffer specified by Data.
+ On output, indicates the amount of data
+ actually transferred.
+ @param[in] TimeOut Indicates the maximum time, in milliseconds,
+ that the transfer is allowed to complete.
+ @param[in] Translator A pointer to the transaction translator data.
+ @param[out] TransferResult A pointer to the detailed result information
+ generated by this control transfer.
+
+ @retval EFI_SUCCESS The control transfer was completed successfully.
+ @retval EFI_DEVICE_ERROR The control transfer failed due to host controller
+ or device error.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.
+ @retval EFI_TIMEOUT The control transfer failed due to timeout.
+
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB2_HOST_CONTROLLER_CONTROL_TRANSFER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data OPTIONAL,
+ IN OUT UINTN *DataLength OPTIONAL,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Initiate a USB bulk transfer using a specific USB Host controller on the USB bus.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[in] DeviceAddress Represents the address of the target device
+ on the USB.
+ @param[in] EndPointAddress The combination of an endpoint number and
+ an endpoint direction of the target USB device.
+ @param[in] DeviceSpeed Indicates device speed.
+ @param[in] MaximumPacketLength Indicates the maximum packet size the target
+ endpoint is capable of sending or receiving.
+ @param[in,out] Data Array of pointers to the buffers of data
+ that will be transmitted to USB device or
+ received from USB device.
+ @param[in,out] DataLength When input, indicates the size, in bytes, of
+ the data buffers specified by Data. When output,
+ indicates the data size actually transferred.
+ @param[in,out] DataToggle A pointer to the data toggle value.
+ @param[in] TimeOut Indicates the maximum time, in milliseconds,
+ in which the transfer is allowed to complete.
+ @param[in] Translator A pointer to the transaction translator data.
+ @param[out] TransferResult A pointer to the detailed result information
+ of the bulk transfer.
+
+ @retval EFI_SUCCESS The bulk transfer was completed successfully.
+ @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
+ Caller should check TransferResult for detailed error information.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The bulk transfer could not be submitted due to a lack of resources.
+ @retval EFI_TIMEOUT The bulk transfer failed due to timeout.
+
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB2_HOST_CONTROLLER_BULK_TRANSFER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ );
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[in] PortNumber Specifies the root hub port from which the status is
+ to be retrieved.
+ This value is zero based.
+ @param[out] PortStatus A pointer to the current port status bits and port
+ status change bits.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified by
+ PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ );
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[in] PortNumber Specifies the root hub port whose feature is requested
+ to be set. This value is zero based.
+ @param[in] PortFeature Indicates the feature selector associated with the feature
+ set request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set for
+ the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid
+ for this function.
+ @retval EFI_TIMEOUT The time out occurred
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB2_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB2_HOST_CONTROLLER_PPI.
+ @param[in] PortNumber Specifies the root hub port whose feature is
+ requested to be cleared.
+ @param[in] PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @return EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @return EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB2_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB2_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+///
+/// This PPI contains a set of services to interact with the USB host controller.
+/// These interfaces are modeled on the UEFI 2.3 specification protocol
+/// EFI_USB2_HOST_CONTROLLER_PROTOCOL. Refer to section 16.1 of the UEFI 2.3
+/// Specification for more information on these interfaces.
+///
+struct _PEI_USB2_HOST_CONTROLLER_PPI {
+ PEI_USB2_HOST_CONTROLLER_CONTROL_TRANSFER ControlTransfer;
+ PEI_USB2_HOST_CONTROLLER_BULK_TRANSFER BulkTransfer;
+ PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber;
+ PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;
+ PEI_USB2_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;
+ PEI_USB2_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;
+};
+
+extern EFI_GUID gPeiUsb2HostControllerPpiGuid;
+
+#endif
+
diff --git a/MdeModulePkg/Include/Ppi/UsbController.h b/MdeModulePkg/Include/Ppi/UsbController.h new file mode 100644 index 0000000000..10e025df55 --- /dev/null +++ b/MdeModulePkg/Include/Ppi/UsbController.h @@ -0,0 +1,88 @@ +/** @file
+ Define APIs to retrieve USB Host Controller Info such as controller type and
+ I/O Port Base Address.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_CONTROLLER_PPI_H_
+#define _PEI_USB_CONTROLLER_PPI_H_
+
+///
+/// Global ID for the PEI_USB_CONTROLLER_PPI.
+///
+#define PEI_USB_CONTROLLER_PPI_GUID \
+ { \
+ 0x3bc1f6de, 0x693e, 0x4547,{ 0xa3, 0x0, 0x21, 0x82, 0x3c, 0xa4, 0x20, 0xb2} \
+ }
+
+///
+/// Forward declaration for the PEI_USB_CONTROLLER_PPI.
+///
+typedef struct _PEI_USB_CONTROLLER_PPI PEI_USB_CONTROLLER_PPI;
+
+///
+/// This bit is used in the ControllerType return parameter of GetUsbController()
+/// to identify the USB Host Controller type as UHCI
+///
+#define PEI_UHCI_CONTROLLER 0x01
+
+///
+/// This bit is used in the ControllerType return parameter of GetUsbController()
+/// to identify the USB Host Controller type as OHCI
+///
+#define PEI_OHCI_CONTROLLER 0x02
+
+///
+/// This bit is used in the ControllerType return parameter of GetUsbController()
+/// to identify the USB Host Controller type as EHCI
+///
+#define PEI_EHCI_CONTROLLER 0x03
+
+/**
+ Retrieve USB Host Controller Info such as controller type and I/O Base Address.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the PEI_USB_CONTROLLER_PPI.
+ @param[in] ControllerId The ID of the USB controller.
+ @param[out] ControllerType On output, returns the type of the USB controller.
+ @param[out] BaseAddress On output, returns the base address of UHCI's I/O ports
+ if UHCI is enabled or the base address of EHCI's MMIO
+ if EHCI is enabled.
+
+ @retval EFI_SUCCESS USB controller attributes were returned successfully.
+ @retval EFI_INVALID_PARAMETER ControllerId is greater than the maximum number
+ of USB controller supported by this platform.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_GET_USB_CONTROLLER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_CONTROLLER_PPI *This,
+ IN UINT8 UsbControllerId,
+ OUT UINTN *ControllerType,
+ OUT UINTN *BaseAddress
+ );
+
+///
+/// This PPI contains a single service to retrieve the USB Host Controller type
+/// and the base address of the I/O ports used to access the USB Host Controller.
+///
+struct _PEI_USB_CONTROLLER_PPI {
+ PEI_GET_USB_CONTROLLER GetUsbController;
+};
+
+extern EFI_GUID gPeiUsbControllerPpiGuid;
+
+#endif
diff --git a/MdeModulePkg/Include/Ppi/UsbHostController.h b/MdeModulePkg/Include/Ppi/UsbHostController.h new file mode 100644 index 0000000000..107b7997d2 --- /dev/null +++ b/MdeModulePkg/Include/Ppi/UsbHostController.h @@ -0,0 +1,251 @@ +/** @file
+ Defines the USB Host Controller PPI that provides I/O services for a USB Host
+ Controller that may be used to access recovery devices. These interfaces are
+ modeled on the UEFI 2.3 specification EFI_USB2_HOST_CONTROLLER_PROTOCOL.
+ Refer to section 16.1 of the UEFI 2.3 Specification for more information on
+ these interfaces.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_HOST_CONTROLLER_PPI_H_
+#define _PEI_USB_HOST_CONTROLLER_PPI_H_
+
+#include <Protocol/Usb2HostController.h>
+
+///
+/// Global ID for the PEI_USB_HOST_CONTROLLER_PPI.
+///
+#define PEI_USB_HOST_CONTROLLER_PPI_GUID \
+ { \
+ 0x652b38a9, 0x77f4, 0x453f, { 0x89, 0xd5, 0xe7, 0xbd, 0xc3, 0x52, 0xfc, 0x53} \
+ }
+
+///
+/// Forward declaration for the PEI_USB_HOST_CONTROLLER_PPI.
+///
+typedef struct _PEI_USB_HOST_CONTROLLER_PPI PEI_USB_HOST_CONTROLLER_PPI;
+
+/**
+ Initiate a USB control transfer using a specific USB Host controller on the USB bus.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[in] DeviceAddress Represents the address of the target device
+ on the USB.
+ @param[in] DeviceSpeed Indicates device speed.
+ @param[in] MaximumPacketLength Indicates the maximum packet size that the
+ default control transfer
+ endpoint is capable of sending or receiving.
+ @param[in] Request A pointer to the USB device request that
+ will be sent to the USB device.
+ @param[in] TransferDirection Specifies the data direction for the transfer.
+ There are three values available:
+ EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
+ @param[in,out] Data A pointer to the buffer of data that will
+ be transmitted to USB device or
+ received from USB device.
+ @param[in,out] DataLength On input, indicates the size, in bytes, of
+ the data buffer specified by Data.
+ On output, indicates the amount of data
+ actually transferred.
+ @param[in] TimeOut Indicates the maximum time, in milliseconds,
+ that the transfer is allowed to complete.
+ @param[out] TransferResult A pointer to the detailed result information
+ generated by this control transfer.
+
+ @retval EFI_DEVICE_ERROR The control transfer failed due to host controller
+ or device error.
+ @retval EFI_SUCCESS The control transfer was completed successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_HOST_CONTROLLER_CONTROL_TRANSFER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 MaximumPacketLength,
+ IN USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data OPTIONAL,
+ IN OUT UINTN *DataLength OPTIONAL,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Initiate a USB bulk transfer using a specific USB Host controller on the USB bus.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[in] DeviceAddress Represents the address of the target device
+ on the USB.
+ @param[in] EndPointAddress The combination of an endpoint number and
+ an endpoint direction of the target USB device.
+ @param[in] MaximumPacketLength Indicates the maximum packet size the target
+ endpoint is capable of sending or receiving.
+ @param[in,out] Data Array of pointers to the buffers of data
+ that will be transmitted to USB device or
+ received from USB device.
+ @param[in,out] DataLength When input, indicates the size, in bytes, of
+ the data buffers specified by Data. When output,
+ indicates the data size actually transferred.
+ @param[in,out] DataToggle A pointer to the data toggle value.
+ @param[in] TimeOut Indicates the maximum time, in milliseconds,
+ in which the transfer is allowed to complete.
+ @param[out] TransferResult A pointer to the detailed result information
+ of the bulk transfer.
+
+ @retval EFI_SUCCESS The bulk transfer was completed successfully.
+ @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
+ Caller should check TransferResult for detailed error information.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_HOST_CONTROLLER_BULK_TRANSFER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ OUT UINT32 *TransferResult
+ );
+
+/**
+ Retrieves the number of root hub ports.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
+ @retval EFI_SUCCESS The port number was retrieved successfully.
+ @retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve
+ the port number.
+ @retval EFI_INVALID_PARAMETER PortNumber is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ OUT UINT8 *PortNumber
+ );
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[in] PortNumber Specifies the root hub port from which the status is
+ to be retrieved.
+ This value is zero based.
+ @param[out] PortStatus A pointer to the current port status bits and port
+ status change bits.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified by
+ PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ );
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[in] PortNumber Specifies the root hub port whose feature is requested
+ to be set. This value is zero based.
+ @param[in] PortFeature Indicates the feature selector associated with the feature
+ set request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set for
+ the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid
+ for this function.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the
+ PEI_USB_HOST_CONTROLLER_PPI.
+ @param[in] PortNumber Specifies the root hub port whose feature is
+ requested to be cleared.
+ @param[in] PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @return EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @return EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @return EFI_DEVICE_ERROR Can't read the register.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_HOST_CONTROLLER_PPI *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ );
+
+///
+/// This PPI contains a set of services to interact with the USB host controller.
+/// These interfaces are modeled on the UEFI 2.3 specification protocol
+/// EFI_USB2_HOST_CONTROLLER_PROTOCOL. Refer to section 16.1 of the UEFI 2.3
+/// Specification for more information on these interfaces.
+///
+struct _PEI_USB_HOST_CONTROLLER_PPI {
+ PEI_USB_HOST_CONTROLLER_CONTROL_TRANSFER ControlTransfer;
+ PEI_USB_HOST_CONTROLLER_BULK_TRANSFER BulkTransfer;
+ PEI_USB_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber;
+ PEI_USB_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;
+ PEI_USB_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;
+ PEI_USB_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;
+};
+
+extern EFI_GUID gPeiUsbHostControllerPpiGuid;
+
+#endif
+
diff --git a/MdeModulePkg/Include/Ppi/UsbIo.h b/MdeModulePkg/Include/Ppi/UsbIo.h new file mode 100644 index 0000000000..16660f88ae --- /dev/null +++ b/MdeModulePkg/Include/Ppi/UsbIo.h @@ -0,0 +1,190 @@ +/** @file
+ Defines the PEI_USB_IO_PPI that the USB-related PEIM can use for I/O operations
+ on the USB BUS. This interface enables recovery from a
+ USB-class storage device, such as USB CD/DVD, USB hard drive, or USB FLASH
+ drive. These interfaces are modeled on the UEFI 2.3 specification EFI_USB_IO_PROTOCOL.
+ Refer to section 16.2.4 of the UEFI 2.3 Specification for more information on
+ these interfaces.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _PEI_USB_IO_PPI_H_
+#define _PEI_USB_IO_PPI_H_
+
+#include <Protocol/Usb2HostController.h>
+
+///
+/// Global ID for the PEI_USB_IO_PPI.
+///
+#define PEI_USB_IO_PPI_GUID \
+ { \
+ 0x7c29785c, 0x66b9, 0x49fc, { 0xb7, 0x97, 0x1c, 0xa5, 0x55, 0xe, 0xf2, 0x83} \
+ }
+
+///
+/// Forward declaration for the PEI_USB_IO_PPI.
+///
+typedef struct _PEI_USB_IO_PPI PEI_USB_IO_PPI;
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
+ @param[in] Request A pointer to the USB device request that will be
+ sent to the USB device.
+ @param[in] Direction Specifies the data direction for the transfer. There
+ are three values available:
+ EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
+ @param[in] TimeOut Indicates the maximum time, in milliseconds, that
+ the transfer is allowed to complete.
+ @param[in,out] Data A pointer to the buffer of data that will be
+ transmitted to or received from the USB device.
+ @param[in] DataLength On input, indicates the size, in bytes, of the data
+ buffer specified by Data.
+
+ @retval EFI_SUCCESS The control transfer was completed successfully.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due
+ to a lack of resources.
+ @retval EFI_TIMEOUT The control transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The control transfer failed due to host controller
+ or device error.
+ Caller should check TransferResult for detailed
+ error information.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_CONTROL_TRANSFER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN UINT32 Timeout,
+ IN OUT VOID *Data OPTIONAL,
+ IN UINTN DataLength OPTIONAL
+ );
+
+/**
+ Submits bulk transfer to a target USB device.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
+ @param[in] EndPointAddress The endpoint address.
+ @param[in] Data The data buffer to be transfered.
+ @param[in] DataLength The length of data buffer.
+ @param[in] TimeOut The timeout for the transfer, in milliseconds.
+
+ @retval EFI_SUCCESS The bulk transfer completed successfully.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The bulk transfer could not be completed due to
+ a lack of resources.
+ @retval EFI_TIMEOUT The bulk transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller
+ or device error.
+ Caller should check TransferResult for detailed
+ error information.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_BULK_TRANSFER)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 DeviceEndpoint,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout
+ );
+
+/**
+ Get interface descriptor from a USB device.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
+ @param[in] InterfaceDescriptor The interface descriptor.
+
+ @retval EFI_SUCCESS The interface descriptor was returned.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_DEVICE_ERROR A device error occurred, the function failed to
+ get the interface descriptor.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_GET_INTERFACE_DESCRIPTOR)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN EFI_USB_INTERFACE_DESCRIPTOR **InterfaceDescriptor
+ );
+
+/**
+ Get endpoint descriptor from a USB device.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
+ @param[in] EndPointIndex The index of the end point.
+ @param[in] EndpointDescriptor The endpoint descriptor.
+
+ @retval EFI_SUCCESS The endpoint descriptor was returned.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_DEVICE_ERROR A device error occurred, the function failed to
+ get the endpoint descriptor.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_GET_ENDPOINT_DESCRIPTOR)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This,
+ IN UINT8 EndpointIndex,
+ IN EFI_USB_ENDPOINT_DESCRIPTOR **EndpointDescriptor
+ );
+
+/**
+ Issue a port reset to the device.
+
+ @param[in] PeiServices The pointer to the PEI Services Table.
+ @param[in] This The pointer to this instance of the PEI_USB_IO_PPI.
+
+ @retval EFI_SUCCESS The port reset was issued successfully.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_DEVICE_ERROR Device error occurred.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PEI_USB_PORT_RESET)(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_USB_IO_PPI *This
+ );
+
+///
+/// This PPI contains a set of services to interact with the USB host controller.
+/// These interfaces are modeled on the UEFI 2.3 specification EFI_USB_IO_PROTOCOL.
+/// Refer to section 16.2.4 of the UEFI 2.3 Specification for more information on
+/// these interfaces.
+///
+struct _PEI_USB_IO_PPI {
+ PEI_USB_CONTROL_TRANSFER UsbControlTransfer;
+ PEI_USB_BULK_TRANSFER UsbBulkTransfer;
+ PEI_USB_GET_INTERFACE_DESCRIPTOR UsbGetInterfaceDescriptor;
+ PEI_USB_GET_ENDPOINT_DESCRIPTOR UsbGetEndpointDescriptor;
+ PEI_USB_PORT_RESET UsbPortReset;
+};
+
+extern EFI_GUID gPeiUsbIoPpiGuid;
+
+#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index f2dbb71556..0987b7955d 100644 --- a/MdeModulePkg/MdeModulePkg.dec +++ b/MdeModulePkg/MdeModulePkg.dec @@ -173,6 +173,19 @@ # Include/Guid/EventIdle.h
gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
+[Ppis]
+ ## Include/Ppi/UsbHostController.h
+ gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
+
+ ## Include/Ppi/Usb2HostController.h
+ gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
+
+ ## Include/Ppi/UsbController.h
+ gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
+
+ ## Include/Ppi/UsbIo.h
+ gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
diff --git a/MdeModulePkg/MdeModulePkg.dsc b/MdeModulePkg/MdeModulePkg.dsc index 5fd84ee5fb..a81e4d8f7a 100644 --- a/MdeModulePkg/MdeModulePkg.dsc +++ b/MdeModulePkg/MdeModulePkg.dsc @@ -185,6 +185,10 @@ MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf
MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
+ MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf
+ MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
+ MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf
+ MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf
MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
|