diff options
| author | jiaxinwu <jiaxin.wu@intel.com> | 2015-06-08 02:04:06 +0000 |
|---|---|---|
| committer | jiaxinwu <jiaxinwu@Edk2> | 2015-06-08 02:04:06 +0000 |
| commit | cff298f44cbb3d592f7673f420315f0a4499153f (patch) | |
| tree | 7801d7694115c9bfc84ccca521c0b40a16d3dce9 | |
| parent | 5d832d62165e1f27173167df74e13a2d6871815b (diff) | |
| download | edk2-platforms-cff298f44cbb3d592f7673f420315f0a4499153f.tar.xz | |
MdePkg: Add header files for DNS/HTTP/IP4Config2.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17567 6f19259b-4bc3-4df7-8a09-765794883524
| -rw-r--r-- | MdePkg/Include/Protocol/Dns4.h | 544 | ||||
| -rw-r--r-- | MdePkg/Include/Protocol/Dns6.h | 539 | ||||
| -rw-r--r-- | MdePkg/Include/Protocol/Http.h | 505 | ||||
| -rw-r--r-- | MdePkg/Include/Protocol/Ip4Config2.h | 313 | ||||
| -rw-r--r-- | MdePkg/MdePkg.dec | 21 |
5 files changed, 1922 insertions, 0 deletions
diff --git a/MdePkg/Include/Protocol/Dns4.h b/MdePkg/Include/Protocol/Dns4.h new file mode 100644 index 0000000000..3e7cdaaf2c --- /dev/null +++ b/MdePkg/Include/Protocol/Dns4.h @@ -0,0 +1,544 @@ +/** @file
+ This file defines the EFI Domain Name Service Binding Protocol interface. It is split
+ into the following two main sections:
+ DNSv4 Service Binding Protocol (DNSv4SB)
+ DNSv4 Protocol (DNSv4)
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.5
+
+**/
+
+#ifndef __EFI_DNS4_PROTOCOL_H__
+#define __EFI_DNS4_PROTOCOL_H__
+
+#define EFI_DNS4_SERVICE_BINDING_PROTOCOL_GUID \
+ { \
+ 0xb625b186, 0xe063, 0x44f7, {0x89, 0x5, 0x6a, 0x74, 0xdc, 0x6f, 0x52, 0xb4 } \
+ }
+
+#define EFI_DNS4_PROTOCOL_GUID \
+ { \
+ 0xae3d28cc, 0xe05b, 0x4fa1, {0xa0, 0x11, 0x7e, 0xb5, 0x5a, 0x3f, 0x14, 0x1 } \
+ }
+
+typedef struct _EFI_DNS4_PROTOCOL EFI_DNS4_PROTOCOL;
+
+///
+/// EFI_DNS4_CONFIG_DATA
+///
+typedef struct {
+ ///
+ /// Count of the DNS servers. When used with GetModeData(),
+ /// this field is the count of originally configured servers when
+ /// Configure() was called for this instance. When used with
+ /// Configure() this is the count of caller-supplied servers. If the
+ /// DnsServerListCount is zero, the DNS server configuration
+ /// will be retrieved from DHCP server automatically.
+ ///
+ UINTN DnsServerListCount;
+ ///
+ /// Pointer to DNS server list containing DnsServerListCount entries or NULL
+ /// if DnsServerListCountis 0. For Configure(), this will be NULL when there are
+ /// no caller supplied server addresses, and, the DNS instance will retrieve
+ /// DNS server from DHCP Server. The provided DNS server list is
+ /// recommended to be filled up in the sequence of preference. When
+ /// used with GetModeData(), the buffer containing the list will
+ /// be allocated by the driver implementing this protocol and must be
+ /// freed by the caller. When used with Configure(), the buffer
+ /// containing the list will be allocated and released by the caller.
+ ///
+ EFI_IPv4_ADDRESS *DnsServerList;
+ ///
+ /// Set to TRUE to use the default IP address/subnet mask and default routing table.
+ ///
+ BOOLEAN UseDefaultSetting;
+ ///
+ /// If TRUE, enable DNS cache function for this DNS instance. If FALSE, all DNS
+ /// query will not lookup local DNS cache.
+ ///
+ BOOLEAN EnableDnsCache;
+ ///
+ /// Use the protocol number defined in "Links to UEFI-Related
+ /// Documents"(http://uefi.org/uefi) under the heading "IANA
+ /// Protocol Numbers". Only TCP or UDP are supported, and other
+ /// protocol values are invalid. An implementation can choose to
+ /// support only UDP, or both TCP and UDP.
+ ///
+ UINT8 Protocol;
+ ///
+ /// If UseDefaultSetting is FALSE indicates the station address to use.
+ ///
+ EFI_IPv4_ADDRESS StationIp;
+ ///
+ /// If UseDefaultSetting is FALSE indicates the subnet mask to use.
+ ///
+ EFI_IPv4_ADDRESS SubnetMask;
+ ///
+ /// Local port number. Set to zero to use the automatically assigned port number.
+ ///
+ UINT16 LocalPort;
+ ///
+ /// Retry number if no response received after RetryInterval.
+ ///
+ UINT32 RetryCount;
+ ///
+ /// Minimum interval of retry is 2 second. If the retry interval is less than 2
+ /// seconds, then use the 2 seconds.
+ ///
+ UINT32 RetryInterval;
+} EFI_DNS4_CONFIG_DATA;
+
+
+///
+/// EFI_DNS4_CACHE_ENTRY
+///
+typedef struct {
+ ///
+ /// Host name.
+ ///
+ CHAR16 *HostName;
+ ///
+ /// IP address of this host.
+ ///
+ EFI_IPv4_ADDRESS *IpAddress;
+ ///
+ /// Time in second unit that this entry will remain in DNS cache. A value of zero
+ /// means that this entry is permanent. A nonzero value will override the existing
+ /// one if this entry to be added is dynamic entry. Implementations may set its
+ /// default timeout value for the dynamically created DNS cache entry after one DNS
+ /// resolve succeeds.
+ ///
+ UINT32 Timeout;
+} EFI_DNS4_CACHE_ENTRY;
+
+///
+/// EFI_DNS4_MODE_DATA
+///
+typedef struct {
+ ///
+ /// The configuration data of this instance.
+ ///
+ EFI_DNS4_CONFIG_DATA DnsConfigData;
+ ///
+ /// Number of configured DNS server. Each DNS instance has its own DNS server
+ /// configuration.
+ ///
+ UINT32 DnsServerCount;
+ ///
+ /// Pointer to common list of addresses of all configured DNS server
+ /// used by EFI_DNS4_PROTOCOL instances. List will include
+ /// DNS servers configured by this or any other EFI_DNS4_PROTOCOL instance.
+ /// The storage for this list is allocated by the driver publishing this
+ /// protocol, and must be freed by the caller.
+ ///
+ EFI_IPv4_ADDRESS *DnsServerList;
+ ///
+ /// Number of DNS Cache entries. The DNS Cache is shared among all DNS instances.
+ ///
+ UINT32 DnsCacheCount;
+ ///
+ /// Pointer to a buffer containing DnsCacheCount DNS Cache
+ /// entry structures. The storage for this list is allocated by the driver
+ /// publishing this protocol and must be freed by caller.
+ ///
+ EFI_DNS4_CACHE_ENTRY *DnsCacheList;
+} EFI_DNS4_MODE_DATA;
+
+///
+/// DNS_HOST_TO_ADDR_DATA
+///
+typedef struct {
+ ///
+ /// Number of the returned IP addresses.
+ ///
+ UINT32 IpCount;
+ ///
+ /// Pointer to the all the returned IP addresses.
+ ///
+ EFI_IPv4_ADDRESS *IpList;
+} DNS_HOST_TO_ADDR_DATA;
+
+///
+/// DNS_ADDR_TO_HOST_DATA
+///
+typedef struct {
+ ///
+ /// Pointer to the primary name for this host address. It's the caller's
+ /// responsibility to free the response memory.
+ ///
+ CHAR16 *HostName;
+} DNS_ADDR_TO_HOST_DATA;
+
+///
+/// DNS_RESOURCE_RECORD
+///
+typedef struct {
+ ///
+ /// The Owner name.
+ ///
+ CHAR8 *QName;
+ ///
+ /// The Type Code of this RR.
+ ///
+ UINT16 QType;
+ ///
+ /// The CLASS code of this RR.
+ ///
+ UINT16 QClass;
+ ///
+ /// 32 bit integer which specify the time interval that the resource record may be
+ /// cached before the source of the information should again be consulted. Zero means
+ /// this RR can not be cached.
+ ///
+ UINT32 TTL;
+ ///
+ /// 16 big integer which specify the length of RData.
+ ///
+ UINT16 DataLength;
+ ///
+ /// A string of octets that describe the resource, the format of this information
+ /// varies according to QType and QClass difference.
+ ///
+ CHAR8 *RData;
+} DNS_RESOURCE_RECORD;
+
+///
+/// DNS_GENERAL_LOOKUP_DATA
+///
+typedef struct {
+ ///
+ /// Number of returned matching RRs.
+ ///
+ UINTN RRCount;
+ ///
+ /// Pointer to the all the returned matching RRs. It's caller responsibility to free
+ /// the allocated memory to hold the returned RRs.
+ ///
+ DNS_RESOURCE_RECORD *RRList;
+} DNS_GENERAL_LOOKUP_DATA;
+
+///
+/// EFI_DNS4_COMPLETION_TOKEN
+///
+typedef struct {
+ ///
+ /// This Event will be signaled after the Status field is updated by the EFI DNS
+ /// protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL.
+ ///
+ EFI_EVENT Event;
+ ///
+ /// Will be set to one of the following values:
+ /// EFI_SUCCESS: The host name to address translation completed successfully.
+ /// EFI_NOT_FOUND: No matching Resource Record (RR) is found.
+ /// EFI_TIMEOUT: No DNS server reachable, or RetryCount was exhausted without
+ /// response from all specified DNS servers.
+ /// EFI_DEVICE_ERROR: An unexpected system or network error occurred.
+ /// EFI_NO_MEDIA: There was a media error.
+ ///
+ EFI_STATUS Status;
+ ///
+ /// Retry number if no response received after RetryInterval. If zero, use the
+ /// parameter configured through Dns.Configure() interface.
+ ///
+ UINT32 RetryCount;
+ ///
+ /// Minimum interval of retry is 2 second. If the retry interval is less than 2
+ /// seconds, then use the 2 seconds. If zero, use the parameter configured through
+ /// Dns.Configure() interface.
+ UINT32 RetryInterval;
+ ///
+ /// DNSv4 completion token data
+ ///
+ union {
+ ///
+ /// When the Token is used for host name to address translation, H2AData is a pointer
+ /// to the DNS_HOST_TO_ADDR_DATA.
+ ///
+ DNS_HOST_TO_ADDR_DATA *H2AData;
+ ///
+ /// When the Token is used for host address to host name translation, A2HData is a
+ /// pointer to the DNS_ADDR_TO_HOST_DATA.
+ ///
+ DNS_ADDR_TO_HOST_DATA *A2HData;
+ ///
+ /// When the Token is used for a general lookup function, GLookupDATA is a pointer to
+ /// the DNS_GENERAL_LOOKUP_DATA.
+ ///
+ DNS_GENERAL_LOOKUP_DATA *GLookupData;
+ } RspData;
+} EFI_DNS4_COMPLETION_TOKEN;
+
+/**
+ Retrieve mode data of this DNS instance.
+
+ This function is used to retrieve DNS mode data for this DNS instance.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[out] DnsModeData Point to the mode data.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data
+ is available because this instance has not been
+ configured.
+ @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL.
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_GET_MODE_DATA) (
+ IN EFI_DNS4_PROTOCOL *This,
+ OUT EFI_DNS4_MODE_DATA *DnsModeData
+ );
+
+/**
+ Configure this DNS instance.
+
+ This function is used to configure DNS mode data for this DNS instance.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[in] DnsConfigData Point to the Configuration data.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_UNSUPPORTED The designated protocol is not supported.
+ @retval EFI_INVALID_PARAMTER Thisis NULL.
+ The StationIp address provided in DnsConfigData is not a
+ valid unicast.
+ DnsServerList is NULL while DnsServerListCount
+ is not ZERO.
+ DnsServerListCount is ZERO while DnsServerList
+ is not NULL
+ @retval EFI_OUT_OF_RESOURCES The DNS instance data or required space could not be
+ allocated.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The
+ EFI DNSv4 Protocol instance is not configured.
+ @retval EFI_ALREADY_STARTED Second call to Configure() with DnsConfigData. To
+ reconfigure the instance the caller must call Configure()
+ with NULL first to return driver to unconfigured state.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_CONFIGURE) (
+ IN EFI_DNS4_PROTOCOL *This,
+ IN EFI_DNS4_CONFIG_DATA *DnsConfigData
+ );
+
+/**
+ Host name to host address translation.
+
+ The HostNameToIp () function is used to translate the host name to host IP address. A
+ type A query is used to get the one or more IP addresses for this host.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[in] Hostname Host name.
+ @param[in] Token Point to the completion token to translate host name
+ to host address.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token is NULL.
+ Token.Event is NULL.
+ HostName is NULL. HostName string is unsupported format.
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_NOT_STARTED This instance has not been started.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_HOST_NAME_TO_IP) (
+ IN EFI_DNS4_PROTOCOL *This,
+ IN CHAR16 *HostName,
+ IN EFI_DNS4_COMPLETION_TOKEN *Token
+ );
+
+/**
+ IPv4 address to host name translation also known as Reverse DNS lookup.
+
+ The IpToHostName() function is used to translate the host address to host name. A type PTR
+ query is used to get the primary name of the host. Support of this function is optional.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[in] IpAddress Ip Address.
+ @param[in] Token Point to the completion token to translate host
+ address to host name.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_UNSUPPORTED This function is not supported.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token is NULL.
+ Token.Event is NULL.
+ IpAddress is not valid IP address .
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.
+ @retval EFI_NOT_STARTED This instance has not been started.
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_IP_TO_HOST_NAME) (
+ IN EFI_DNS4_PROTOCOL *This,
+ IN EFI_IPv4_ADDRESS IpAddress,
+ IN EFI_DNS4_COMPLETION_TOKEN *Token
+ );
+
+/**
+ Retrieve arbitrary information from the DNS server.
+
+ This GeneralLookup() function retrieves arbitrary information from the DNS. The caller
+ supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. All
+ RR content (e.g., TTL) was returned. The caller need parse the returned RR to get
+ required information. The function is optional.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[in] QName Pointer to Query Name.
+ @param[in] QType Query Type.
+ @param[in] QClass Query Name.
+ @param[in] Token Point to the completion token to retrieve arbitrary
+ information.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_UNSUPPORTED This function is not supported. Or the requested
+ QType is not supported
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token is NULL.
+ Token.Event is NULL.
+ QName is NULL.
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_GENERAL_LOOKUP) (
+ IN EFI_DNS4_PROTOCOL *This,
+ IN CHAR8 *QName,
+ IN UINT16 QType,
+ IN UINT16 QClass,
+ IN EFI_DNS4_COMPLETION_TOKEN *Token
+ );
+
+/**
+ This function is to update the DNS Cache.
+
+ The UpdateDnsCache() function is used to add/delete/modify DNS cache entry. DNS cache
+ can be normally dynamically updated after the DNS resolve succeeds. This function
+ provided capability to manually add/delete/modify the DNS cache.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[in] DeleteFlag If FALSE, this function is to add one entry to the
+ DNS Cahce. If TRUE, this function will delete
+ matching DNS Cache entry.
+ @param[in] Override If TRUE, the maching DNS cache entry will be
+ overwritten with the supplied parameter. If FALSE,
+ EFI_ACCESS_DENIED will be returned if the entry to
+ be added is already existed.
+ @param[in] DnsCacheEntry Pointer to DNS Cache entry.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ DnsCacheEntry.HostName is NULL.
+ DnsCacheEntry.IpAddress is NULL.
+ DnsCacheEntry.Timeout is zero.
+ @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is
+ not TRUE.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_UPDATE_DNS_CACHE) (
+ IN EFI_DNS4_PROTOCOL *This,
+ IN BOOLEAN DeleteFlag,
+ IN BOOLEAN Override,
+ IN EFI_DNS4_CACHE_ENTRY DnsCacheEntry
+ );
+
+/**
+ Polls for incoming data packets and processes outgoing data packets.
+
+ The Poll() function can be used by network drivers and applications to increase the
+ rate that data packets are moved between the communications device and the transmit
+ and receive queues.
+ In some systems, the periodic timer event in the managed network driver may not poll
+ the underlying communications device fast enough to transmit and/or receive all data
+ packets without missing incoming packets or dropping outgoing packets. Drivers and
+ applications that are experiencing packet loss should try calling the Poll()
+ function more often.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.
+ @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive
+ queue. Consider increasing the polling rate.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_POLL) (
+ IN EFI_DNS4_PROTOCOL *This
+ );
+
+/**
+ Abort an asynchronous DNS operation, including translation between IP and Host, and
+ general look up behavior.
+
+ The Cancel() function is used to abort a pending resolution request. After calling
+ this function, Token.Status will be set to EFI_ABORTED and then Token.Event will be
+ signaled. If the token is not in one of the queues, which usually means that the
+ asynchronous operation has completed, this function will not signal the token and
+ EFI_NOT_FOUND is returned.
+
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.
+ @param[in] Token Pointer to a token that has been issued by
+ EFI_DNS4_PROTOCOL.HostNameToIp (),
+ EFI_DNS4_PROTOCOL.IpToHostName() or
+ EFI_DNS4_PROTOCOL.GeneralLookup().
+ If NULL, all pending tokens are aborted.
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.
+ @retval EFI_NOT_STARTED This EFI DNS4 Protocol instance has not been started.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS
+ operation was not found in the transmit queue. It
+ was either completed or was not issued by
+ HostNameToIp(), IpToHostName() or GeneralLookup().
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS4_CANCEL) (
+ IN EFI_DNS4_PROTOCOL *This,
+ IN EFI_DNS4_COMPLETION_TOKEN *Token
+ );
+
+///
+/// The EFI_DNS4_Protocol provides the function to get the host name and address
+/// mapping, also provides pass through interface to retrieve arbitrary information
+/// from DNS.
+///
+struct _EFI_DNS4_PROTOCOL {
+ EFI_DNS4_GET_MODE_DATA GetModeData;
+ EFI_DNS4_CONFIGURE Configure;
+ EFI_DNS4_HOST_NAME_TO_IP HostNameToIp;
+ EFI_DNS4_IP_TO_HOST_NAME IpToHostName;
+ EFI_DNS4_GENERAL_LOOKUP GeneralLookUp;
+ EFI_DNS4_UPDATE_DNS_CACHE UpdateDnsCache;
+ EFI_DNS4_POLL Poll;
+ EFI_DNS4_CANCEL Cancel;
+};
+
+extern EFI_GUID gEfiDns4ServiceBindingProtocolGuid;
+extern EFI_GUID gEfiDns4ProtocolGuid;
+
+#endif
diff --git a/MdePkg/Include/Protocol/Dns6.h b/MdePkg/Include/Protocol/Dns6.h new file mode 100644 index 0000000000..03cdf6a514 --- /dev/null +++ b/MdePkg/Include/Protocol/Dns6.h @@ -0,0 +1,539 @@ +/** @file
+ This file defines the EFI DNSv6 (Domain Name Service version 6) Protocol. It is split
+ into the following two main sections:
+ DNSv6 Service Binding Protocol (DNSv6SB)
+ DNSv6 Protocol (DNSv6)
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.5
+
+**/
+
+#ifndef __EFI_DNS6_PROTOCOL_H__
+#define __EFI_DNS6_PROTOCOL_H__
+
+#define EFI_DNS6_SERVICE_BINDING_PROTOCOL_GUID \
+ { \
+ 0x7f1647c8, 0xb76e, 0x44b2, {0xa5, 0x65, 0xf7, 0xf, 0xf1, 0x9c, 0xd1, 0x9e } \
+ }
+
+#define EFI_DNS6_PROTOCOL_GUID \
+ { \
+ 0xca37bc1f, 0xa327, 0x4ae9, {0x82, 0x8a, 0x8c, 0x40, 0xd8, 0x50, 0x6a, 0x17 } \
+ }
+
+typedef struct _EFI_DNS6_PROTOCOL EFI_DNS6_PROTOCOL;
+
+///
+/// EFI_DNS6_CONFIG_DATA
+///
+typedef struct {
+ ///
+ /// If TRUE, enable DNS cache function for this DNS instance. If FALSE, all DNS query
+ /// will not lookup local DNS cache.
+ ///
+ BOOLEAN EnableDnsCache;
+ ///
+ /// Use the protocol number defined in
+ /// http://www.iana.org/assignments/protocol-numbers. Beside TCP/UDP, Other protocol
+ /// is invalid value. An implementation can choose to support UDP, or both TCP and UDP.
+ ///
+ UINT8 Protocol;
+ ///
+ /// The local IP address to use. Set to zero to let the underlying IPv6
+ /// driver choose a source address. If not zero it must be one of the
+ /// configured IP addresses in the underlying IPv6 driver.
+ ///
+ EFI_IPv6_ADDRESS StationIp;
+ ///
+ /// Local port number. Set to zero to use the automatically assigned port number.
+ ///
+ UINT16 LocalPort;
+ ///
+ /// Count of the DNS servers. When used with GetModeData(),
+ /// this field is the count of originally configured servers when
+ /// Configure() was called for this instance. When used with
+ /// Configure() this is the count of caller-supplied servers. If the
+ /// DnsServerListCount is zero, the DNS server configuration
+ /// will be retrieved from DHCP server automatically.
+ ///
+ UINT32 DnsServerCount;
+ ///
+ /// Pointer to DNS server list containing DnsServerListCount
+ /// entries or NULL if DnsServerListCount is 0. For Configure(),
+ /// this will be NULL when there are no caller supplied server addresses
+ /// and the DNS instance will retrieve DNS server from DHCP Server.
+ /// The provided DNS server list is recommended to be filled up in the sequence
+ /// of preference. When used with GetModeData(), the buffer containing the list
+ /// will be allocated by the driver implementing this protocol and must be
+ /// freed by the caller. When used with Configure(), the buffer
+ /// containing the list will be allocated and released by the caller.
+ ///
+ EFI_IPv6_ADDRESS *DnsServerList;
+ ///
+ /// Retry number if no response received after RetryInterval.
+ ///
+ UINT32 RetryCount;
+ ///
+ /// Minimum interval of retry is 2 second. If the retry interval is less than 2
+ /// seconds, then use the 2 seconds.
+ UINT32 RetryInterval;
+} EFI_DNS6_CONFIG_DATA;
+
+///
+/// EFI_DNS6_CACHE_ENTRY
+///
+typedef struct {
+ ///
+ /// Host name. This should be interpreted as Unicode characters.
+ ///
+ CHAR16 *HostName;
+ ///
+ /// IP address of this host.
+ ///
+ EFI_IPv6_ADDRESS *IpAddress;
+ ///
+ /// Time in second unit that this entry will remain in DNS cache. A value of zero means
+ /// that this entry is permanent. A nonzero value will override the existing one if
+ /// this entry to be added is dynamic entry. Implementations may set its default
+ /// timeout value for the dynamically created DNS cache entry after one DNS resolve
+ /// succeeds.
+ UINT32 Timeout;
+} EFI_DNS6_CACHE_ENTRY;
+
+///
+/// EFI_DNS6_MODE_DATA
+///
+typedef struct {
+ ///
+ /// The configuration data of this instance.
+ ///
+ EFI_DNS6_CONFIG_DATA DnsConfigData;
+ ///
+ /// Number of configured DNS6 servers.
+ ///
+ UINT32 DnsServerCount;
+ ///
+ /// Pointer to common list of addresses of all configured DNS server used by EFI_DNS6_PROTOCOL
+ /// instances. List will include DNS servers configured by this or any other EFI_DNS6_PROTOCOL
+ /// instance. The storage for this list is allocated by the driver publishing this protocol,
+ /// and must be freed by the caller.
+ ///
+ EFI_IPv6_ADDRESS *DnsServerList;
+ ///
+ /// Number of DNS Cache entries. The DNS Cache is shared among all DNS instances.
+ ///
+ UINT32 DnsCacheCount;
+ ///
+ /// Pointer to a buffer containing DnsCacheCount DNS Cache
+ /// entry structures. The storage for thislist is allocated by the driver
+ /// publishing this protocol and must be freed by caller.
+ ///
+ EFI_DNS6_CACHE_ENTRY *DnsCacheList;
+} EFI_DNS6_MODE_DATA;
+
+///
+/// DNS6_HOST_TO_ADDR_DATA
+///
+typedef struct {
+ ///
+ /// Number of the returned IP address.
+ ///
+ UINT32 IpCount;
+ ///
+ /// Pointer to the all the returned IP address.
+ ///
+ EFI_IPv6_ADDRESS *IpList;
+} DNS6_HOST_TO_ADDR_DATA;
+
+///
+/// DNS6_ADDR_TO_HOST_DATA
+///
+typedef struct {
+ ///
+ /// Pointer to the primary name for this host address. It's the caller's
+ /// responsibility to free the response memory.
+ ///
+ CHAR16 *HostName;
+} DNS6_ADDR_TO_HOST_DATA;
+
+///
+/// DNS6_RESOURCE_RECORD
+///
+typedef struct {
+ ///
+ /// The Owner name.
+ ///
+ CHAR8 *QName;
+ ///
+ /// The Type Code of this RR.
+ ///
+ UINT16 QType;
+ ///
+ /// The CLASS code of this RR.
+ ///
+ UINT16 QClass;
+ ///
+ /// 32 bit integer which specify the time interval that the resource record may be
+ /// cached before the source of the information should again be consulted. Zero means
+ /// this RR cannot be cached.
+ ///
+ UINT32 TTL;
+ ///
+ /// 16 big integer which specify the length of RData.
+ ///
+ UINT16 DataLength;
+ ///
+ /// A string of octets that describe the resource, the format of this information
+ /// varies according to QType and QClass difference.
+ ///
+ CHAR8 *RData;
+} DNS6_RESOURCE_RECORD;
+
+///
+/// DNS6_GENERAL_LOOKUP_DATA
+///
+typedef struct {
+ ///
+ /// Number of returned matching RRs.
+ ///
+ UINTN RRCount;
+ ///
+ /// Pointer to the all the returned matching RRs. It's caller responsibility to free
+ /// the allocated memory to hold the returned RRs.
+ ///
+ DNS6_RESOURCE_RECORD *RRList;
+} DNS6_GENERAL_LOOKUP_DATA;
+
+///
+/// EFI_DNS6_COMPLETION_TOKEN
+///
+typedef struct {
+ ///
+ /// This Event will be signaled after the Status field is updated by the EFI DNSv6
+ /// protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL.
+ ///
+ EFI_EVENT Event;
+ ///
+ /// Will be set to one of the following values:
+ /// EFI_SUCCESS: The host name to address translation completed successfully.
+ /// EFI_NOT_FOUND: No matching Resource Record (RR) is found.
+ /// EFI_TIMEOUT: No DNS server reachable, or RetryCount was exhausted without
+ /// response from all specified DNS servers.
+ /// EFI_DEVICE_ERROR: An unexpected system or network error occurred.
+ /// EFI_NO_MEDIA: There was a media error.
+ ///
+ EFI_STATUS Status;
+ ///
+ /// The parameter configured through DNSv6.Configure() interface. Retry number if no
+ /// response received after RetryInterval.
+ ///
+ UINT32 RetryCount;
+ ///
+ /// The parameter configured through DNSv6.Configure() interface. Minimum interval of
+ /// retry is 2 seconds. If the retry interval is less than 2 seconds, then use the 2
+ /// seconds.
+ ///
+ UINT32 RetryInterval;
+ ///
+ /// DNSv6 completion token data
+ ///
+ union {
+ ///
+ /// When the Token is used for host name to address translation, H2AData is a pointer
+ /// to the DNS6_HOST_TO_ADDR_DATA.
+ ///
+ DNS6_HOST_TO_ADDR_DATA *H2AData;
+ ///
+ /// When the Token is used for host address to host name translation, A2HData is a
+ /// pointer to the DNS6_ADDR_TO_HOST_DATA.
+ ///
+ DNS6_ADDR_TO_HOST_DATA *A2HData;
+ ///
+ /// When the Token is used for a general lookup function, GLookupDATA is a pointer to
+ /// the DNS6_GENERAL_LOOKUP_DATA.
+ ///
+ DNS6_GENERAL_LOOKUP_DATA *GLookupData;
+ } RspData;
+} EFI_DNS6_COMPLETION_TOKEN;
+
+/**
+ Retrieve mode data of this DNS instance.
+
+ This function is used to retrieve DNS mode data for this DNS instance.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[out] DnsModeData Pointer to the caller-allocated storage for the
+ EFI_DNS6_MODE_DATA data.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data
+ is available because this instance has not been
+ configured.
+ @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL.
+ @retval EFI_OUT_OF_RESOURCE Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_DNS6_GET_MODE_DATA)(
+ IN EFI_DNS6_PROTOCOL *This,
+ OUT EFI_DNS6_MODE_DATA *DnsModeData
+ );
+
+/**
+ Configure this DNS instance.
+
+ The Configure() function is used to set and change the configuration data for this
+ EFI DNSv6 Protocol driver instance. Reset the DNS instance if DnsConfigData is NULL.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[in] DnsConfigData Pointer to the configuration data structure. All associated
+ storage to be allocated and released by caller.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMTER This is NULL.
+ The StationIp address provided in DnsConfigData is not a valid unicast.
+ DnsServerList is NULL while DnsServerList Count is not ZERO.
+ DnsServerList Count is ZERO while DnsServerList is not NULL.
+ @retval EFI_OUT_OF_RESOURCES The DNS instance data or required space could not be allocated.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The
+ EFI DNSv6 Protocol instance is not configured.
+ @retval EFI_UNSUPPORTED The designated protocol is not supported.
+ @retval EFI_ALREADY_STARTED Second call to Configure() with DnsConfigData. To
+ reconfigure the instance the caller must call Configure() with
+ NULL first to return driver to unconfigured state.
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_DNS6_CONFIGURE)(
+ IN EFI_DNS6_PROTOCOL *This,
+ IN EFI_DNS6_CONFIG_DATA *DnsConfigData
+ );
+
+/**
+ Host name to host address translation.
+
+ The HostNameToIp () function is used to translate the host name to host IP address. A
+ type A query is used to get the one or more IPv6 addresses for this host.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[in] Hostname Host name.
+ @param[in] Token Point to the completion token to translate host name
+ to host address.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token is NULL.
+ Token.Event is NULL.
+ HostName is NULL or buffer contained unsupported characters.
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.
+ @retval EFI_NOT_STARTED This instance has not been started.
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS6_HOST_NAME_TO_IP) (
+ IN EFI_DNS6_PROTOCOL *This,
+ IN CHAR16 *HostName,
+ IN EFI_DNS6_COMPLETION_TOKEN *Token
+ );
+
+/**
+ Host address to host name translation.
+
+ The IpToHostName () function is used to translate the host address to host name. A
+ type PTR query is used to get the primary name of the host. Implementation can choose
+ to support this function or not.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[in] IpAddress Ip Address.
+ @param[in] Token Point to the completion token to translate host
+ address to host name.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_UNSUPPORTED This function is not supported.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token is NULL.
+ Token.Event is NULL.
+ IpAddress is not valid IP address.
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_NOT_STARTED This instance has not been started.
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS6_IP_TO_HOST_NAME) (
+ IN EFI_DNS6_PROTOCOL *This,
+ IN EFI_IPv6_ADDRESS IpAddress,
+ IN EFI_DNS6_COMPLETION_TOKEN *Token
+ );
+
+/**
+ This function provides capability to retrieve arbitrary information from the DNS
+ server.
+
+ This GeneralLookup() function retrieves arbitrary information from the DNS. The caller
+ supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. All
+ RR content (e.g., TTL) was returned. The caller need parse the returned RR to get
+ required information. The function is optional. Implementation can choose to support
+ it or not.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[in] QName Pointer to Query Name.
+ @param[in] QType Query Type.
+ @param[in] QClass Query Name.
+ @param[in] Token Point to the completion token to retrieve arbitrary
+ information.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_UNSUPPORTED This function is not supported. Or the requested
+ QType is not supported
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token is NULL.
+ Token.Event is NULL.
+ QName is NULL.
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_NOT_STARTED This instance has not been started.
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS6_GENERAL_LOOKUP) (
+ IN EFI_DNS6_PROTOCOL *This,
+ IN CHAR8 *QName,
+ IN UINT16 QType,
+ IN UINT16 QClass,
+ IN EFI_DNS6_COMPLETION_TOKEN *Token
+ );
+
+/**
+ This function is to update the DNS Cache.
+
+ The UpdateDnsCache() function is used to add/delete/modify DNS cache entry. DNS cache
+ can be normally dynamically updated after the DNS resolve succeeds. This function
+ provided capability to manually add/delete/modify the DNS cache.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[in] DeleteFlag If FALSE, this function is to add one entry to the
+ DNS Cahce. If TRUE, this function will delete
+ matching DNS Cache entry.
+ @param[in] Override If TRUE, the maching DNS cache entry will be
+ overwritten with the supplied parameter. If FALSE,
+ EFI_ACCESS_DENIED will be returned if the entry to
+ be added is already existed.
+ @param[in] DnsCacheEntry Pointer to DNS Cache entry.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ DnsCacheEntry.HostName is NULL.
+ DnsCacheEntry.IpAddress is NULL.
+ DnsCacheEntry.Timeout is zero.
+ @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is
+ not TRUE.
+ @retval EFI_OUT_OF_RESOURCE Failed to allocate needed resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS6_UPDATE_DNS_CACHE) (
+ IN EFI_DNS6_PROTOCOL *This,
+ IN BOOLEAN DeleteFlag,
+ IN BOOLEAN Override,
+ IN EFI_DNS6_CACHE_ENTRY DnsCacheEntry
+ );
+
+/**
+ Polls for incoming data packets and processes outgoing data packets.
+
+ The Poll() function can be used by network drivers and applications to increase the
+ rate that data packets are moved between the communications device and the transmit
+ and receive queues.
+
+ In some systems, the periodic timer event in the managed network driver may not poll
+ the underlying communications device fast enough to transmit and/or receive all data
+ packets without missing incoming packets or dropping outgoing packets. Drivers and
+ applications that are experiencing packet loss should try calling the Poll()
+ function more often.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.
+ @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_NO_MAPPING There is no source address is available for use.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive
+ queue. Consider increasing the polling rate.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS6_POLL) (
+ IN EFI_DNS6_PROTOCOL *This
+ );
+
+/**
+ Abort an asynchronous DNS operation, including translation between IP and Host, and
+ general look up behavior.
+
+ The Cancel() function is used to abort a pending resolution request. After calling
+ this function, Token.Status will be set to EFI_ABORTED and then Token.Event will be
+ signaled. If the token is not in one of the queues, which usually means that the
+ asynchronous operation has completed, this function will not signal the token and
+ EFI_NOT_FOUND is returned.
+
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.
+ @param[in] Token Pointer to a token that has been issued by
+ EFI_DNS6_PROTOCOL.HostNameToIp (),
+ EFI_DNS6_PROTOCOL.IpToHostName() or
+ EFI_DNS6_PROTOCOL.GeneralLookup().
+ If NULL, all pending tokens are aborted.
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.
+ @retval EFI_NOT_STARTED This EFI DNS6 Protocol instance has not been started.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_NO_MAPPING There's no source address is available for use.
+ @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS
+ operation was not found in the transmit queue. It
+ was either completed or was not issued by
+ HostNameToIp(), IpToHostName() or GeneralLookup().
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_DNS6_CANCEL) (
+ IN EFI_DNS6_PROTOCOL *This,
+ IN EFI_DNS6_COMPLETION_TOKEN *Token
+ );
+
+///
+/// The EFI_DNS6_PROTOCOL provides the function to get the host name and address
+/// mapping, also provide pass through interface to retrieve arbitrary information from
+/// DNSv6.
+///
+struct _EFI_DNS6_PROTOCOL {
+ EFI_DNS6_GET_MODE_DATA GetModeData;
+ EFI_DNS6_CONFIGURE Configure;
+ EFI_DNS6_HOST_NAME_TO_IP HostNameToIp;
+ EFI_DNS6_IP_TO_HOST_NAME IpToHostName;
+ EFI_DNS6_GENERAL_LOOKUP GeneralLookUp;
+ EFI_DNS6_UPDATE_DNS_CACHE UpdateDnsCache;
+ EFI_DNS6_POLL Poll;
+ EFI_DNS6_CANCEL Cancel;
+};
+
+extern EFI_GUID gEfiDns6ServiceBindingProtocolGuid;
+extern EFI_GUID gEfiDns6ProtocolGuid;
+
+#endif
diff --git a/MdePkg/Include/Protocol/Http.h b/MdePkg/Include/Protocol/Http.h new file mode 100644 index 0000000000..b1f8c51341 --- /dev/null +++ b/MdePkg/Include/Protocol/Http.h @@ -0,0 +1,505 @@ +/** @file
+ This file defines the EFI HTTP Protocol interface. It is split into
+ the following two main sections:
+ HTTP Service Binding Protocol (HTTPSB)
+ HTTP Protocol (HTTP)
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.5
+
+**/
+
+#ifndef __EFI_HTTP_PROTOCOL_H__
+#define __EFI_HTTP_PROTOCOL_H__
+
+#define EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID \
+ { \
+ 0xbdc8e6af, 0xd9bc, 0x4379, {0xa7, 0x2a, 0xe0, 0xc4, 0xe7, 0x5d, 0xae, 0x1c } \
+ }
+
+#define EFI_HTTP_PROTOCOL_GUID \
+ { \
+ 0x7a59b29b, 0x910b, 0x4171, {0x82, 0x42, 0xa8, 0x5a, 0x0d, 0xf2, 0x5b, 0x5b } \
+ }
+
+typedef struct _EFI_HTTP_PROTOCOL EFI_HTTP_PROTOCOL;
+
+///
+/// EFI_HTTP_VERSION
+///
+typedef enum {
+ HttpVersion10,
+ HttpVersion11,
+ HttpVersionUnsupported
+} EFI_HTTP_VERSION;
+
+///
+/// EFI_HTTP_METHOD
+///
+typedef enum {
+ HttpMethodGet,
+ HttpMethodPost,
+ HttpMethodPatch,
+ HttpMethodOptions,
+ HttpMethodConnect,
+ HttpMethodHead,
+ HttpMethodPut,
+ HttpMethodDelete,
+ HttpMethodTrace
+} EFI_HTTP_METHOD;
+
+///
+/// EFI_HTTP_STATUS_CODE
+///
+typedef enum {
+ HTTP_STATUS_UNSUPPORTED_STATUS = 0,
+ HTTP_STATUS_100_CONTINUE,
+ HTTP_STATUS_101_SWITCHING_PROTOCOLS,
+ HTTP_STATUS_200_OK,
+ HTTP_STATUS_201_CREATED,
+ HTTP_STATUS_202_ACCEPTED,
+ HTTP_STATUS_203_NON_AUTHORITATIVE_INFORMATION,
+ HTTP_STATUS_204_NO_CONTENT,
+ HTTP_STATUS_205_RESET_CONTENT,
+ HTTP_STATUS_206_PARTIAL_CONTENT,
+ HTTP_STATUS_300_MULTIPLE_CHIOCES,
+ HTTP_STATUS_301_MOVED_PERMANENTLY,
+ HTTP_STATUS_302_FOUND,
+ HTTP_STATUS_303_SEE_OTHER,
+ HTTP_STATUS_304_NOT_MODIFIED,
+ HTTP_STATUS_305_USE_PROXY,
+ HTTP_STATUS_307_TEMPORARY_REDIRECT,
+ HTTP_STATUS_400_BAD_REQUEST,
+ HTTP_STATUS_401_UNAUTHORIZED,
+ HTTP_STATUS_402_PAYMENT_REQUIRED,
+ HTTP_STATUS_403_FORBIDDEN,
+ HTTP_STATUS_404_NOT_FOUND,
+ HTTP_STATUS_405_METHOD_NOT_ALLOWED,
+ HTTP_STATUS_406_NOT_ACCEPTABLE,
+ HTTP_STATUS_407_PROXY_AUTHENTICATION_REQUIRED,
+ HTTP_STATUS_408_REQUEST_TIME_OUT,
+ HTTP_STATUS_409_CONFLICT,
+ HTTP_STATUS_410_GONE,
+ HTTP_STATUS_411_LENGTH_REQUIRED,
+ HTTP_STATUS_412_PRECONDITION_FAILED,
+ HTTP_STATUS_413_REQUEST_ENTITY_TOO_LARGE,
+ HTTP_STATUS_414_REQUEST_URI_TOO_LARGE,
+ HTTP_STATUS_415_UNSUPPORETD_MEDIA_TYPE,
+ HTTP_STATUS_416_REQUESTED_RANGE_NOT_SATISFIED,
+ HTTP_STATUS_417_EXPECTATION_FAILED,
+ HTTP_STATUS_500_INTERNAL_SERVER_ERROR,
+ HTTP_STATUS_501_NOT_IMIPLEMENTED,
+ HTTP_STATUS_502_BAD_GATEWAY,
+ HTTP_STATUS_503_SERVICE_UNAVAILABLE,
+ HTTP_STATUS_504_GATEWAY_TIME_OUT,
+ HTTP_STATUS_505_HTTP_VERSION_NOT_SUPPORTED
+} EFI_HTTP_STATUS_CODE;
+
+///
+/// EFI_HTTPv4_ACCESS_POINT
+///
+typedef struct {
+ ///
+ /// Set to TRUE to instruct the EFI HTTP instance to use the default address
+ /// information in every TCP connection made by this instance. In addition, when set
+ /// to TRUE, LocalAddress, LocalSubnet, and LocalPort are ignored.
+ ///
+ BOOLEAN UseDefaultAddress;
+ ///
+ /// If UseDefaultAddress is set to FALSE, this defines the local IP address to be
+ /// used in every TCP connection opened by this instance.
+ ///
+ EFI_IPv4_ADDRESS LocalAddress;
+ ///
+ /// If UseDefaultAddress is set to FALSE, this defines the local subnet to be used
+ /// in every TCP connection opened by this instance.
+ ///
+ EFI_IPv4_ADDRESS LocalSubnet;
+ ///
+ /// If UseDefaultAddress is set to FALSE, this defines the local port to be used in
+ /// every TCP connection opened by this instance.
+ ///
+ UINT16 LocalPort;
+} EFI_HTTPv4_ACCESS_POINT;
+
+///
+/// EFI_HTTPv6_ACCESS_POINT
+///
+typedef struct {
+ ///
+ /// Local IP address to be used in every TCP connection opened by this instance.
+ ///
+ EFI_IPv6_ADDRESS LocalAddress;
+ ///
+ /// Local port to be used in every TCP connection opened by this instance.
+ ///
+ UINT16 LocalPort;
+} EFI_HTTPv6_ACCESS_POINT;
+
+///
+/// EFI_HTTP_CONFIG_DATA_ACCESS_POINT
+///
+
+
+typedef struct {
+ ///
+ /// HTTP version that this instance will support.
+ ///
+ EFI_HTTP_VERSION HttpVersion;
+ ///
+ /// Time out (in milliseconds) when blocking for requests.
+ ///
+ UINT32 TimeOutMillisec;
+ ///
+ /// Defines behavior of EFI DNS and TCP protocols consumed by this instance. If
+ /// FALSE, this instance will use EFI_DNS4_PROTOCOL and EFI_TCP4_PROTOCOL. If TRUE,
+ /// this instance will use EFI_DNS6_PROTOCOL and EFI_TCP6_PROTOCOL.
+ ///
+ BOOLEAN LocalAddressIsIPv6;
+
+ union {
+ ///
+ /// When LocalAddressIsIPv6 is FALSE, this points to the local address, subnet, and
+ /// port used by the underlying TCP protocol.
+ ///
+ EFI_HTTPv4_ACCESS_POINT *IPv4Node;
+ ///
+ /// When LocalAddressIsIPv6 is TRUE, this points to the local IPv6 address and port
+ /// used by the underlying TCP protocol.
+ ///
+ EFI_HTTPv6_ACCESS_POINT *IPv6Node;
+ } AccessPoint;
+} EFI_HTTP_CONFIG_DATA;
+
+///
+/// EFI_HTTP_REQUEST_DATA
+///
+typedef struct {
+ ///
+ /// The HTTP method (e.g. GET, POST) for this HTTP Request.
+ ///
+ EFI_HTTP_METHOD Method;
+ ///
+ /// The URI of a remote host. From the information in this field, the HTTP instance
+ /// will be able to determine whether to use HTTP or HTTPS and will also be able to
+ /// determine the port number to use. If no port number is specified, port 80 (HTTP)
+ /// is assumed. See RFC 3986 for more details on URI syntax.
+ ///
+ CHAR16 *Url;
+} EFI_HTTP_REQUEST_DATA;
+
+///
+/// EFI_HTTP_RESPONSE_DATA
+///
+typedef struct {
+ ///
+ /// Response status code returned by the remote host.
+ ///
+ EFI_HTTP_STATUS_CODE StatusCode;
+} EFI_HTTP_RESPONSE_DATA;
+
+///
+/// EFI_HTTP_HEADER
+///
+typedef struct {
+ ///
+ /// Null terminated string which describes a field name. See RFC 2616 Section 14 for
+ /// detailed information about field names.
+ ///
+ CHAR8 *FieldName;
+ ///
+ /// Null terminated string which describes the corresponding field value. See RFC 2616
+ /// Section 14 for detailed information about field values.
+ ///
+ CHAR8 *FieldValue;
+} EFI_HTTP_HEADER;
+
+///
+/// EFI_HTTP_MESSAGE
+///
+typedef struct {
+ ///
+ /// HTTP message data.
+ ///
+ union {
+ ///
+ /// When the token is used to send a HTTP request, Request is a pointer to storage that
+ /// contains such data as URL and HTTP method.
+ ///
+ EFI_HTTP_REQUEST_DATA *Request;
+ ///
+ /// When used to await a response, Response points to storage containing HTTP response
+ /// status code.
+ ///
+ EFI_HTTP_RESPONSE_DATA *Response;
+ } Data;
+ ///
+ /// Number of HTTP header structures in Headers list. On request, this count is
+ /// provided by the caller. On response, this count is provided by the HTTP driver.
+ ///
+ UINTN HeaderCount;
+ ///
+ /// Array containing list of HTTP headers. On request, this array is populated by the
+ /// caller. On response, this array is allocated and populated by the HTTP driver. It
+ /// is the responsibility of the caller to free this memory on both request and
+ /// response.
+ ///
+ EFI_HTTP_HEADER *Headers;
+ ///
+ /// Length in bytes of the HTTP body. This can be zero depending on the HttpMethod type.
+ ///
+ UINTN BodyLength;
+ ///
+ /// Body associated with the HTTP request or response. This can be NULL depending on
+ /// the HttpMethod type.
+ ///
+ VOID *Body;
+} EFI_HTTP_MESSAGE;
+
+
+///
+/// EFI_HTTP_TOKEN
+///
+typedef struct {
+ ///
+ /// This Event will be signaled after the Status field is updated by the EFI HTTP
+ /// Protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL. The Task Priority
+ /// Level (TPL) of Event must be lower than or equal to TPL_CALLBACK.
+ ///
+ EFI_EVENT Event;
+ ///
+ /// Status will be set to one of the following value if the HTTP request is
+ /// successfully sent or if an unexpected error occurs:
+ /// EFI_SUCCESS: The HTTP request was successfully sent to the remote host.
+ /// EFI_ABORTED: The HTTP request was cancelled by the caller and removed from
+ /// the transmit queue.
+ /// EFI_TIMEOUT: The HTTP request timed out before reaching the remote host.
+ /// EFI_DEVICE_ERROR: An unexpected system or network error occurred.
+ ///
+ EFI_STATUS Status;
+ ///
+ /// Pointer to storage containing HTTP message data.
+ ///
+ EFI_HTTP_MESSAGE *Message;
+} EFI_HTTP_TOKEN;
+
+/**
+ Returns the operational parameters for the current HTTP child instance.
+
+ The GetModeData() function is used to read the current mode data (operational
+ parameters) for this HTTP protocol instance.
+
+ @param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
+ @param[out] HttpConfigData Point to buffer for operational parameters of this
+ HTTP instance.
+
+ @retval EFI_SUCCESS Operation succeeded.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_HTTP_GET_MODE_DATA)(
+ IN EFI_HTTP_PROTOCOL *This,
+ OUT EFI_HTTP_CONFIG_DATA *HttpConfigData
+ );
+
+/**
+ Initialize or brutally reset the operational parameters for this EFI HTTP instance.
+
+ The Configure() function does the following:
+ When HttpConfigData is not NULL Initialize this EFI HTTP instance by configuring
+ timeout, local address, port, etc.
+ When HttpConfigData is NULL, reset this EFI HTTP instance by closing all active
+ connections with remote hosts, canceling all asynchronous tokens, and flush request
+ and response buffers without informing the appropriate hosts.
+
+ Except for GetModeData() and Configure(), No other EFI HTTP function can be executed
+ by this instance until the Configure() function is executed and returns successfully.
+
+ @param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
+ @param[in] HttpConfigData Pointer to the configure data to configure the instance.
+
+ @retval EFI_SUCCESS Operation succeeded.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ HttpConfigData->LocalAddressIsIPv6 is FALSE and
+ HttpConfigData->IPv4Node is NULL.
+ HttpConfigData->LocalAddressIsIPv6 is TRUE and
+ HttpConfigData->IPv6Node is NULL.
+ @retval EFI_ALREADY_STARTED Reinitialize this HTTP instance without calling
+ Configure() with NULL to reset it.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when
+ executing Configure().
+ @retval EFI_UNSUPPORTED One or more options in ConfigData are not supported
+ in the implementation.
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_HTTP_CONFIGURE)(
+ IN EFI_HTTP_PROTOCOL *This,
+ IN EFI_HTTP_CONFIG_DATA *HttpConfigData
+ );
+
+/**
+ The Request() function queues an HTTP request to this HTTP instance,
+ similar to Transmit() function in the EFI TCP driver. When the HTTP request is sent
+ successfully, or if there is an error, Status in token will be updated and Event will
+ be signaled.
+
+ @param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
+ @param[in] Token Pointer to storage containing HTTP request token.
+
+ @retval EFI_SUCCESS Outgoing data was processed.
+ @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started.
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
+ @retval EFI_TIMEOUT Data was dropped out of the transmit or receive queue.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token->Message is NULL.
+ Token->Message->Body is not NULL,
+ Token->Message->BodyLength is non-zero, and
+ Token->Message->Data is NULL, but a previous call to
+ Request()has not been completed successfully.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HTTP_REQUEST) (
+ IN EFI_HTTP_PROTOCOL *This,
+ IN EFI_HTTP_TOKEN *Token
+ );
+
+/**
+ Abort an asynchronous HTTP request or response token.
+
+ The Cancel() function aborts a pending HTTP request or response transaction. If
+ Token is not NULL and the token is in transmit or receive queues when it is being
+ cancelled, its Token->Status will be set to EFI_ABORTED and then Token->Event will
+ be signaled. If the token is not in one of the queues, which usually means that the
+ asynchronous operation has completed, EFI_NOT_FOUND is returned. If Token is NULL,
+ all asynchronous tokens issued by Request() or Response() will be aborted.
+
+ @param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
+ @param[in] Token Point to storage containing HTTP request or response
+ token.
+
+ @retval EFI_SUCCESS Request and Response queues are successfully flushed.
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_NOT_STARTED This instance hasn't been configured.
+ @retval EFI_NO_MAPPING When using the default address, configuration (DHCP,
+ BOOTP, RARP, etc.) hasn't finished yet.
+ @retval EFI_NOT_FOUND The asynchronous request or response token is not
+ found.
+ @retval EFI_UNSUPPORTED The implementation does not support this function.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HTTP_CANCEL)(
+ IN EFI_HTTP_PROTOCOL *This,
+ IN EFI_HTTP_TOKEN *Token
+ );
+
+/**
+ The Response() function queues an HTTP response to this HTTP instance, similar to
+ Receive() function in the EFI TCP driver. When the HTTP request is sent successfully,
+ or if there is an error, Status in token will be updated and Event will be signaled.
+
+ The HTTP driver will queue a receive token to the underlying TCP instance. When data
+ is received in the underlying TCP instance, the data will be parsed and Token will
+ be populated with the response data. If the data received from the remote host
+ contains an incomplete or invalid HTTP header, the HTTP driver will continue waiting
+ (asynchronously) for more data to be sent from the remote host before signaling
+ Event in Token.
+
+ It is the responsibility of the caller to allocate a buffer for Body and specify the
+ size in BodyLength. If the remote host provides a response that contains a content
+ body, up to BodyLength bytes will be copied from the receive buffer into Body and
+ BodyLength will be updated with the amount of bytes received and copied to Body. This
+ allows the client to download a large file in chunks instead of into one contiguous
+ block of memory. Similar to HTTP request, if Body is not NULL and BodyLength is
+ non-zero and all other fields are NULL or 0, the HTTP driver will queue a receive
+ token to underlying TCP instance. If data arrives in the receive buffer, up to
+ BodyLength bytes of data will be copied to Body. The HTTP driver will then update
+ BodyLength with the amount of bytes received and copied to Body.
+
+ If the HTTP driver does not have an open underlying TCP connection with the host
+ specified in the response URL, Request() will return EFI_ACCESS_DENIED. This is
+ consistent with RFC 2616 recommendation that HTTP clients should attempt to maintain
+ an open TCP connection between client and host.
+
+ @param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
+ @param[in] Token Pointer to storage containing HTTP response token.
+
+ @retval EFI_SUCCESS Allocation succeeded.
+ @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been
+ initialized.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Token->Message->Headers is NULL.
+ Token->Message is NULL.
+ Token->Message->Body is not NULL,
+ Token->Message->BodyLength is non-zero, and
+ Token->Message->Data is NULL, but a previous call to
+ Response() has not been completed successfully.
+ @retval EFI_ACCESS_DENIED An open TCP connection is not present with the host
+ specified by response URL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HTTP_RESPONSE) (
+ IN EFI_HTTP_PROTOCOL *This,
+ IN EFI_HTTP_TOKEN *Token
+ );
+
+/**
+ The Poll() function can be used by network drivers and applications to increase the
+ rate that data packets are moved between the communication devices and the transmit
+ and receive queues.
+
+ In some systems, the periodic timer event in the managed network driver may not poll
+ the underlying communications device fast enough to transmit and/or receive all data
+ packets without missing incoming packets or dropping outgoing packets. Drivers and
+ applications that are experiencing packet loss should try calling the Poll() function
+ more often.
+
+ @param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Incoming or outgoing data was processed..
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred
+ @retval EFI_INVALID_PARAMETER This is NULL.
+ @retval EFI_NOT_READY No incoming or outgoing data is processed.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HTTP_POLL) (
+ IN EFI_HTTP_PROTOCOL *This
+ );
+
+///
+/// The EFI HTTP protocol is designed to be used by EFI drivers and applications to
+/// create and transmit HTTP Requests, as well as handle HTTP responses that are
+/// returned by a remote host. This EFI protocol uses and relies on an underlying EFI
+/// TCP protocol.
+///
+struct _EFI_HTTP_PROTOCOL {
+ EFI_HTTP_GET_MODE_DATA GetModeData;
+ EFI_HTTP_CONFIGURE Configure;
+ EFI_HTTP_REQUEST Request;
+ EFI_HTTP_CANCEL Cancel;
+ EFI_HTTP_RESPONSE Response;
+ EFI_HTTP_POLL Poll;
+};
+
+extern EFI_GUID gEfiHttpServiceBindingProtocolGuid;
+extern EFI_GUID gEfiHttpProtocolGuid;
+
+#endif
diff --git a/MdePkg/Include/Protocol/Ip4Config2.h b/MdePkg/Include/Protocol/Ip4Config2.h new file mode 100644 index 0000000000..383da8a4e0 --- /dev/null +++ b/MdePkg/Include/Protocol/Ip4Config2.h @@ -0,0 +1,313 @@ +/** @file
+ This file provides a definition of the EFI IPv4 Configuration II
+ Protocol.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at<BR>
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+@par Revision Reference:
+This Protocol is introduced in UEFI Specification 2.5
+
+**/
+#ifndef __EFI_IP4CONFIG2_PROTOCOL_H__
+#define __EFI_IP4CONFIG2_PROTOCOL_H__
+
+#include <Protocol/Ip4.h>
+
+#define EFI_IP4_CONFIG2_PROTOCOL_GUID \
+ { \
+ 0x5b446ed1, 0xe30b, 0x4faa, {0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80 } \
+ }
+
+typedef struct _EFI_IP4_CONFIG2_PROTOCOL EFI_IP4_CONFIG2_PROTOCOL;
+
+
+///
+/// EFI_IP4_CONFIG2_DATA_TYPE
+///
+typedef enum {
+ ///
+ /// The interface information of the communication device this EFI
+ /// IPv4 Configuration II Protocol instance manages. This type of
+ /// data is read only. The corresponding Data is of type
+ /// EFI_IP4_CONFIG2_INTERFACE_INFO.
+ ///
+ Ip4Config2DataTypeInterfaceInfo,
+ ///
+ /// The general configuration policy for the EFI IPv4 network stack
+ /// running on the communication device this EFI IPv4
+ /// Configuration II Protocol instance manages. The policy will
+ /// affect other configuration settings. The corresponding Data is of
+ /// type EFI_IP4_CONFIG2_POLICY.
+ ///
+ Ip4Config2DataTypePolicy,
+ ///
+ /// The station addresses set manually for the EFI IPv4 network
+ /// stack. It is only configurable when the policy is
+ /// Ip4Config2PolicyStatic. The corresponding Data is of
+ /// type EFI_IP4_CONFIG2_MANUAL_ADDRESS.
+ ///
+ Ip4Config2DataTypeManualAddress,
+ ///
+ /// The gateway addresses set manually for the EFI IPv4 network
+ /// stack running on the communication device this EFI IPv4
+ /// Configuration II Protocol manages. It is not configurable when
+ /// the policy is Ip4Config2PolicyDhcp. The gateway
+ /// addresses must be unicast IPv4 addresses. The corresponding
+ /// Data is a pointer to an array of EFI_IPv4_ADDRESS instances.
+ ///
+ Ip4Config2DataTypeGateway,
+ ///
+ /// The DNS server list for the EFI IPv4 network stack running on
+ /// the communication device this EFI IPv4 Configuration II
+ /// Protocol manages. It is not configurable when the policy is
+ /// Ip4Config2PolicyDhcp. The DNS server addresses must be
+ /// unicast IPv4 addresses. The corresponding Data is a pointer to
+ /// an array of EFI_IPv4_ADDRESS instances.
+ ///
+ Ip4Config2DataTypeDnsServer,
+ Ip4Config2DataTypeMaximum
+} EFI_IP4_CONFIG2_DATA_TYPE;
+
+///
+/// EFI_IP4_CONFIG2_INTERFACE_INFO
+///
+typedef struct {
+ ///
+ /// The name of the interface. It is a NULL-terminated Unicode string.
+ ///
+ CHAR16 Name[32];
+ ///
+ /// The interface type of the network interface. See RFC 1700,
+ /// section "Number Hardware Type".
+ ///
+ UINT8 IfType;
+ ///
+ /// The size, in bytes, of the network interface's hardware address.
+ ///
+ UINT32 HwAddressSize;
+ ///
+ /// The hardware address for the network interface.
+ ///
+ EFI_MAC_ADDRESS HwAddress;
+ ///
+ /// The station IPv4 address of this EFI IPv4 network stack.
+ ///
+ EFI_IPv4_ADDRESS StationAddress;
+ ///
+ /// The subnet address mask that is associated with the station address.
+ ///
+ EFI_IPv4_ADDRESS SubnetMask;
+ ///
+ /// Size of the following RouteTable, in bytes. May be zero.
+ ///
+ UINT32 RouteTableSize;
+ ///
+ /// The route table of the IPv4 network stack runs on this interface.
+ /// Set to NULL if RouteTableSize is zero. Type EFI_IP4_ROUTE_TABLE is defined in
+ /// EFI_IP4_PROTOCOL.GetModeData().
+ ///
+ EFI_IP4_ROUTE_TABLE *RouteTable OPTIONAL;
+} EFI_IP4_CONFIG2_INTERFACE_INFO;
+
+///
+/// EFI_IP4_CONFIG2_POLICY
+///
+typedef enum {
+ ///
+ /// Under this policy, the Ip4Config2DataTypeManualAddress,
+ /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration
+ /// data are required to be set manually. The EFI IPv4 Protocol will get all
+ /// required configuration such as IPv4 address, subnet mask and
+ /// gateway settings from the EFI IPv4 Configuration II protocol.
+ ///
+ Ip4Config2PolicyStatic,
+ ///
+ /// Under this policy, the Ip4Config2DataTypeManualAddress,
+ /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration data are
+ /// not allowed to set via SetData(). All of these configurations are retrieved from DHCP
+ /// server or other auto-configuration mechanism.
+ ///
+ Ip4Config2PolicyDhcp,
+ Ip4Config2PolicyMax
+} EFI_IP4_CONFIG2_POLICY;
+
+///
+/// EFI_IP4_CONFIG2_MANUAL_ADDRESS
+///
+typedef struct {
+ ///
+ /// The IPv4 unicast address.
+ ///
+ EFI_IPv4_ADDRESS Address;
+ ///
+ /// The subnet mask.
+ ///
+ EFI_IPv4_ADDRESS SubnetMask;
+} EFI_IP4_CONFIG2_MANUAL_ADDRESS;
+
+/**
+ Set the configuration for the EFI IPv4 network stack running on the communication device this EFI
+ IPv4 Configuration II Protocol instance manages.
+
+ This function is used to set the configuration data of type DataType for the EFI IPv4 network stack
+ running on the communication device this EFI IPv4 Configuration II Protocol instance manages.
+ The successfully configured data is valid after system reset or power-off.
+ The DataSize is used to calculate the count of structure instances in the Data for some
+ DataType that multiple structure instances are allowed.
+ This function is always non-blocking. When setting some typeof configuration data, an
+ asynchronous process is invoked to check the correctness of the data, such as doing address conflict
+ detection on the manually set local IPv4 address. EFI_NOT_READY is returned immediately to
+ indicate that such an asynchronous process is invoked and the process is not finished yet. The caller
+ willing to get the result of the asynchronous process is required to call RegisterDataNotify()
+ to register an event on the specified configuration data. Once the event is signaled, the caller can call
+ GetData()to get back the configuration data in order to know the result. For other types of
+ configuration data that do not require an asynchronous configuration process, the result of the
+ operation is immediately returned.
+
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
+ @param[in] DataType The type of data to set.
+ @param[in] DataSize Size of the buffer pointed to by Data in bytes.
+ @param[in] Data The data buffer to set. The type ofthe data buffer is associated
+ with the DataType.
+
+ @retval EFI_SUCCESS The specified configuration data for the EFI IPv4 network stack is set
+ successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
+ This is NULL.
+ Data is NULL.
+ One or more fields in Data do not match the requirement of the data type
+ indicated by DataType.
+ @retval EFI_WRITE_PROTECTED The specified configuration data is read-only or the specified configuration
+ data can not be set under the current policy.
+ @retval EFI_ACCESS_DENIED Another set operation on the specified configuration data is already in process.
+ @retval EFI_NOT_READY An asynchronous process is invoked to set the specified configuration data and
+ the process is not finished yet.
+ @retval EFI_BAD_BUFFER_SIZE The DataSize does not match the size of the type indicated by DataType.
+ @retval EFI_UNSUPPORTED This DataType is not supported.
+ @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
+ @retval EFI_DEVICE_ERROR An unexpected system error or network error occurred.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_IP4_CONFIG2_SET_DATA) (
+ IN EFI_IP4_CONFIG2_PROTOCOL *This,
+ IN EFI_IP4_CONFIG2_DATA_TYPE DataType,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
+
+/**
+ Get the configuration data for the EFI IPv4 network stack running on the communication device this
+ EFI IPv4 Configuration II Protocol instance manages.
+
+ This function returns the configuration data of type DataType for the EFI IPv4 network stack
+ running on the communication device this EFI IPv4 Configuration II Protocol instance manages.
+ The caller is responsible for allocating the buffer usedto return the specified configuration data and
+ the required size will be returned to the caller if the size of the buffer is too small.
+ EFI_NOT_READY is returned if the specified configuration data is not ready due to an already in
+ progress asynchronous configuration process. The caller can call RegisterDataNotify() to
+ register an event on the specified configuration data. Once the asynchronous configuration process is
+ finished, the event will be signaled and a subsequent GetData() call will return the specified
+ configuration data.
+
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
+ @param[in] DataType The type of data to get.
+ @param[out] DataSize On input, in bytes, the size of Data. On output, in bytes, the size
+ of buffer required to store the specified configuration data.
+ @param[in] Data The data buffer in which the configuration data is returned. The
+ type of the data buffer is associated with the DataType. Ignored
+ if DataSize is 0.
+
+ @retval EFI_SUCCESS The specified configuration data is got successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:
+ This is NULL.
+ DataSize is NULL.
+ Data is NULL if *DataSizeis not zero.
+ @retval EFI_BUFFER_TOO_SMALL The size of Data is too small for the specified configuration data
+ and the required size is returned in DataSize.
+ @retval EFI_NOT_READY The specified configuration data is not ready due to an already in
+ progress asynchronous configuration process.
+ @retval EFI_NOT_FOUND The specified configuration data is not found.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_IP4_CONFIG2_GET_DATA) (
+ IN EFI_IP4_CONFIG2_PROTOCOL *This,
+ IN EFI_IP4_CONFIG2_DATA_TYPE DataType,
+ IN OUT UINTN *DataSize,
+ IN VOID *Data OPTIONAL
+ );
+
+/**
+ Register an event that is to be signaled whenever a configuration process on the specified
+ configuration data is done.
+
+ This function registers an event that is to be signaled whenever a configuration process on the
+ specified configuration data is done. An event can be registered for different DataType
+ simultaneously and the caller is responsible for determining which type of configuration data causes
+ the signaling of the event in such case.
+
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
+ @param[in] DataType The type of data to unregister the event for.
+ @param[in] Event The event to register.
+
+ @retval EFI_SUCCESS The notification event for the specified configuration data is
+ registered.
+ @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
+ @retval EFI_UNSUPPORTED The configuration data type specified by DataType is not supported.
+ @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
+ @retval EFI_ACCESS_DENIED The Event is already registered for the DataType.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_IP4_CONFIG2_REGISTER_NOTIFY) (
+ IN EFI_IP4_CONFIG2_PROTOCOL *This,
+ IN EFI_IP4_CONFIG2_DATA_TYPE DataType,
+ IN EFI_EVENT Event
+ );
+
+/**
+ Remove a previously registered event for the specified configuration data.
+
+ This function removes a previously registeredevent for the specified configuration data.
+
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
+ @param[in] DataType The type of data to remove the previously registered event for.
+ @param[in] Event The event to unregister.
+
+ @retval EFI_SUCCESS The event registered for the specified configuration data is removed.
+ @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
+ @retval EFI_NOT_FOUND The Eventhas not been registered for the specified DataType.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_IP4_CONFIG2_UNREGISTER_NOTIFY) (
+ IN EFI_IP4_CONFIG2_PROTOCOL *This,
+ IN EFI_IP4_CONFIG2_DATA_TYPE DataType,
+ IN EFI_EVENT Event
+ );
+
+///
+/// The EFI_IP4_CONFIG2_PROTOCOL is designed to be the central repository for the common
+/// configurations and the administrator configurable settings for the EFI IPv4 network stack.
+/// An EFI IPv4 Configuration II Protocol instance will be installed on each communication device that
+/// the EFI IPv4 network stack runs on.
+///
+struct _EFI_IP4_CONFIG2_PROTOCOL {
+ EFI_IP4_CONFIG2_SET_DATA SetData;
+ EFI_IP4_CONFIG2_GET_DATA GetData;
+ EFI_IP4_CONFIG2_REGISTER_NOTIFY RegisterDataNotify;
+ EFI_IP4_CONFIG2_UNREGISTER_NOTIFY UnregisterDataNotify;
+};
+
+extern EFI_GUID gEfiIp4Config2ProtocolGuid;
+
+#endif
+
diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index ff5908b3c4..f052730d63 100644 --- a/MdePkg/MdePkg.dec +++ b/MdePkg/MdePkg.dec @@ -1536,6 +1536,27 @@ ## Include/Protocol/Pkcs7Verify.h
gEfiPkcs7VerifyProtocolGuid = { 0x47889fb2, 0xd671, 0x4fab, { 0xa0, 0xca, 0xdf, 0x0e, 0x44, 0xdf, 0x70, 0xd6 }}
+
+ ## Include/Protocol/Ip4Config2.h
+ gEfiIp4Config2ProtocolGuid = { 0x5b446ed1, 0xe30b, 0x4faa, {0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80 }}
+
+ ## Include/Protocol/Dns4.h
+ gEfiDns4ServiceBindingProtocolGuid = { 0xb625b186, 0xe063, 0x44f7, { 0x89, 0x5, 0x6a, 0x74, 0xdc, 0x6f, 0x52, 0xb4 }}
+
+ ## Include/Protocol/Dns4.h
+ gEfiDns4ProtocolGuid = { 0xae3d28cc, 0xe05b, 0x4fa1, { 0xa0, 0x11, 0x7e, 0xb5, 0x5a, 0x3f, 0x14, 0x1 }}
+
+ ## Include/Protocol/Dns6.h
+ gEfiDns6ServiceBindingProtocolGuid = { 0x7f1647c8, 0xb76e, 0x44b2, { 0xa5, 0x65, 0xf7, 0xf, 0xf1, 0x9c, 0xd1, 0x9e }}
+
+ ## Include/Protocol/Dns6.h
+ gEfiDns6ProtocolGuid = { 0xca37bc1f, 0xa327, 0x4ae9, { 0x82, 0x8a, 0x8c, 0x40, 0xd8, 0x50, 0x6a, 0x17 }}
+
+ ## Include/Protocol/Http.h
+ gEfiHttpServiceBindingProtocolGuid = { 0xbdc8e6af, 0xd9bc, 0x4379, {0xa7, 0x2a, 0xe0, 0xc4, 0xe7, 0x5d, 0xae, 0x1c }}
+
+ ## Include/Protocol/Http.h
+ gEfiHttpProtocolGuid = { 0x7a59b29b, 0x910b, 0x4171, {0x82, 0x42, 0xa8, 0x5a, 0x0d, 0xf2, 0x5b, 0x5b }}
#
# [Error.gEfiMdePkgTokenSpaceGuid]
|