diff options
| author | Ard Biesheuvel <ard.biesheuvel@linaro.org> | 2015-06-09 09:28:06 +0000 |
|---|---|---|
| committer | abiesheuvel <abiesheuvel@Edk2> | 2015-06-09 09:28:06 +0000 |
| commit | eadbec01094cddc4052e73ea06743d5c6761e9f7 (patch) | |
| tree | 30a38f7e67559d7f37a3251f65243e7249f239e8 /ArmPkg/Drivers/ArmGic | |
| parent | fd0618c1f27e07edb0f2f5e3d8b134a4e11ff334 (diff) | |
| download | edk2-platforms-eadbec01094cddc4052e73ea06743d5c6761e9f7.tar.xz | |
ArmPkg: reduce sysreg access count in GIC revision probe
Accesses to system registers are disproportionately heavy-weight
when executed under virtualization, since each one involves two
world switches (from guest to host and back again).
So change the sequence that enables the GIC SRE interface so that
it performs only a single sysreg read to test whether the SRE
interface is enabled already, and only performs a write and an
additional read if that turns out not to be the case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17596 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'ArmPkg/Drivers/ArmGic')
| -rw-r--r-- | ArmPkg/Drivers/ArmGic/AArch64/ArmGicArchLib.c | 10 | ||||
| -rw-r--r-- | ArmPkg/Drivers/ArmGic/Arm/ArmGicArchLib.c | 10 |
2 files changed, 16 insertions, 4 deletions
diff --git a/ArmPkg/Drivers/ArmGic/AArch64/ArmGicArchLib.c b/ArmPkg/Drivers/ArmGic/AArch64/ArmGicArchLib.c index 9da69b2131..88fa4621e6 100644 --- a/ArmPkg/Drivers/ArmGic/AArch64/ArmGicArchLib.c +++ b/ArmPkg/Drivers/ArmGic/AArch64/ArmGicArchLib.c @@ -23,6 +23,8 @@ ArmGicGetSupportedArchRevision ( VOID
)
{
+ UINT32 IccSre;
+
// Ideally we would like to use the GICC IIDR Architecture version here, but
// this does not seem to be very reliable as the implementation could easily
// get it wrong. It is more reliable to check if the GICv3 System Register
@@ -37,8 +39,12 @@ ArmGicGetSupportedArchRevision ( // Note: We do not need to set ICC_SRE_EL2.Enable because the OS is started
// at the same exception level.
// It is the OS responsibility to set this bit.
- ArmGicV3SetControlSystemRegisterEnable (ArmGicV3GetControlSystemRegisterEnable () | ICC_SRE_EL2_SRE);
- if (ArmGicV3GetControlSystemRegisterEnable () & ICC_SRE_EL2_SRE) {
+ IccSre = ArmGicV3GetControlSystemRegisterEnable ();
+ if (!(IccSre & ICC_SRE_EL2_SRE)) {
+ ArmGicV3SetControlSystemRegisterEnable (IccSre | ICC_SRE_EL2_SRE);
+ IccSre = ArmGicV3GetControlSystemRegisterEnable ();
+ }
+ if (IccSre & ICC_SRE_EL2_SRE) {
return ARM_GIC_ARCH_REVISION_3;
}
}
diff --git a/ArmPkg/Drivers/ArmGic/Arm/ArmGicArchLib.c b/ArmPkg/Drivers/ArmGic/Arm/ArmGicArchLib.c index f360a40583..9ef56efeaa 100644 --- a/ArmPkg/Drivers/ArmGic/Arm/ArmGicArchLib.c +++ b/ArmPkg/Drivers/ArmGic/Arm/ArmGicArchLib.c @@ -23,6 +23,8 @@ ArmGicGetSupportedArchRevision ( VOID
)
{
+ UINT32 IccSre;
+
// Ideally we would like to use the GICC IIDR Architecture version here, but
// this does not seem to be very reliable as the implementation could easily
// get it wrong. It is more reliable to check if the GICv3 System Register
@@ -37,8 +39,12 @@ ArmGicGetSupportedArchRevision ( // Note: We do not need to set ICC_SRE_EL2.Enable because the OS is started
// at the same exception level.
// It is the OS responsibility to set this bit.
- ArmGicV3SetControlSystemRegisterEnable (ArmGicV3GetControlSystemRegisterEnable () | ICC_SRE_EL2_SRE);
- if (ArmGicV3GetControlSystemRegisterEnable () & ICC_SRE_EL2_SRE) {
+ IccSre = ArmGicV3GetControlSystemRegisterEnable ();
+ if (!(IccSre & ICC_SRE_EL2_SRE)) {
+ ArmGicV3SetControlSystemRegisterEnable (IccSre| ICC_SRE_EL2_SRE);
+ IccSre = ArmGicV3GetControlSystemRegisterEnable ();
+ }
+ if (IccSre & ICC_SRE_EL2_SRE) {
return ARM_GIC_ARCH_REVISION_3;
}
}
|