ArmPlatformPkg/ArmJunoPkg: Added Juno development board support

    
ARM 64bit development platform.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16249 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 321 insertions, 0 deletions

diff --git a/ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf b/ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf
new file mode 100644
index 0000000000..66d4da79c1
--- /dev/null
+++ b/ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf
@@ -0,0 +1,321 @@
+#

+#  Copyright (c) 2013-2014, ARM Limited. All rights reserved.

+#

+#  This program and the accompanying materials

+#  are licensed and made available under the terms and conditions of the BSD License

+#  which accompanies this distribution.  The full text of the license may be found at

+#  http://opensource.org/licenses/bsd-license.php

+#

+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+#

+

+################################################################################

+#

+# FD Section

+# The [FD] Section is made up of the definition statements and a

+# description of what goes into  the Flash Device Image.  Each FD section

+# defines one flash "device" image.  A flash device image may be one of

+# the following: Removable media bootable image (like a boot floppy

+# image,) an Option ROM image (that would be "flashed" into an add-in

+# card,) a System "Flash"  image (that would be burned into a system's

+# flash) or an Update ("Capsule") image that will be used to update and

+# existing system flash.

+#

+################################################################################

+

+[FD.BL33_AP_UEFI]

+BaseAddress   = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.

+Size          = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device

+ErasePolarity = 1

+

+# This one is tricky, it must be: BlockSize * NumBlocks = Size

+BlockSize     = 0x00001000

+NumBlocks     = 0xF0

+

+################################################################################

+#

+# Following are lists of FD Region layout which correspond to the locations of different

+# images within the flash device.

+#

+# Regions must be defined in ascending order and may not overlap.

+#

+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by

+# the pipe "|" character, followed by the size of the region, also in hex with the leading

+# "0x" characters. Like:

+# Offset|Size

+# PcdOffsetCName|PcdSizeCName

+# RegionType <FV, DATA, or FILE>

+#

+################################################################################

+

+0x00000000|0x000F0000

+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize

+FV = FVMAIN_COMPACT

+

+

+################################################################################

+#

+# FV Section

+#

+# [FV] section is used to define what components or modules are placed within a flash

+# device file.  This section also defines order the components and modules are positioned

+# within the image.  The [FV] section consists of define statements, set statements and

+# module statements.

+#

+################################################################################

+

+[FV.FvMain]

+BlockSize          = 0x40

+NumBlocks          = 0         # This FV gets compressed so make it just big enough

+FvAlignment        = 8         # FV alignment and FV attributes setting.

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  INF MdeModulePkg/Core/Dxe/DxeMain.inf

+

+  #

+  # PI DXE Drivers producing Architectural Protocols (EFI Services)

+  #

+  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf

+  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf

+  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf

+  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf

+  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf

+  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf

+  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf

+  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

+

+  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf

+  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf

+

+  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf

+

+  #

+  # Multiple Console IO support

+  #

+  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf

+  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf

+  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf

+  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

+  INF EmbeddedPkg/SerialDxe/SerialDxe.inf

+

+  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf

+  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf

+  INF ArmPlatformPkg/ArmJunoPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf

+

+  # NOR Flash driver

+  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf

+

+  # Versatile Express FileSystem

+  INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf

+

+  #

+  # FAT filesystem + GPT/MBR partitioning

+  #

+  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf

+  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

+  INF FatBinPkg/EnhancedFatDxe/Fat.inf

+  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

+

+  #

+  # Usb Support

+  #

+  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf

+  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf

+  INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf

+  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf

+  INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf

+

+  #

+  # Networking stack

+  #

+  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf

+  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf

+  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf

+  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf

+  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf

+  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf

+  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf

+  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf

+  INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf

+

+  #

+  # UEFI applications

+  #

+  INF ShellBinPkg/UefiShell/UefiShell.inf

+

+  #

+  # Juno platform driver

+  #

+  INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf

+

+  #

+  # Bds

+  #

+  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf

+  INF ArmPlatformPkg/Bds/Bds.inf

+

+[FV.FVMAIN_COMPACT]

+FvAlignment        = 8

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  INF ArmPlatformPkg/PrePi/PeiMPCore.inf

+

+  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {

+    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {

+      SECTION FV_IMAGE = FVMAIN

+    }

+  }

+

+

+################################################################################

+#

+# Rules are use with the [FV] section's module INF type to define

+# how an FFS file is created for a given INF file. The following Rule are the default

+# rules for the different module type. User can add the customized rules to define the

+# content of the FFS file.

+#

+################################################################################

+

+

+############################################################################

+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #

+############################################################################

+#

+#[Rule.Common.DXE_DRIVER]

+#  FILE DRIVER = $(NAMED_GUID) {

+#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+#    COMPRESS PI_STD {

+#      GUIDED {

+#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

+#        UI       STRING="$(MODULE_NAME)" Optional

+#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+#      }

+#    }

+#  }

+#

+############################################################################

+

+#

+# These SEC rules are used for ArmPlatformPkg/PrePi module.

+# ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the

+# UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint

+#

+[Rule.ARM.SEC]

+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

+    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.AARCH64.SEC]

+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

+    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+# A shim specific rule is required to ensure the alignment is 4K.

+# Otherwise BaseTools pick up the AArch32 alignment (ie: 32)

+[Rule.ARM.SEC.SHIM]

+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

+    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.Common.PEI_CORE]

+  FILE PEI_CORE = $(NAMED_GUID) {

+    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI     STRING ="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.PEIM]

+  FILE PEIM = $(NAMED_GUID) {

+     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex

+     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi

+     UI       STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.PEIM.TIANOCOMPRESSED]

+  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {

+    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex

+    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {

+      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

+      UI        STRING="$(MODULE_NAME)" Optional

+    }

+  }

+

+[Rule.Common.DXE_CORE]

+  FILE DXE_CORE = $(NAMED_GUID) {

+    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI       STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.UEFI_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.DXE_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.DXE_RUNTIME_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.UEFI_APPLICATION]

+  FILE APPLICATION = $(NAMED_GUID) {

+    UI     STRING ="$(MODULE_NAME)" Optional

+    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.Common.UEFI_DRIVER.BINARY]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX DXE_DEPEX Optional      |.depex

+    PE32      PE32                    |.efi

+    UI        STRING="$(MODULE_NAME)" Optional

+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.UEFI_APPLICATION.BINARY]

+  FILE APPLICATION = $(NAMED_GUID) {

+    PE32      PE32                    |.efi

+    UI        STRING="$(MODULE_NAME)" Optional

+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }