ArmPlatformPkg: Remove unused Package

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>

1 files changed, 0 insertions, 320 deletions

diff --git a/ArmPlatformPkg/ArmPlatformPkg.fdf b/ArmPlatformPkg/ArmPlatformPkg.fdf
deleted file mode 100644
index 0dd98498f1..0000000000
--- a/ArmPlatformPkg/ArmPlatformPkg.fdf
+++ /dev/null
@@ -1,320 +0,0 @@
-#

-#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.

-#

-#  This program and the accompanying materials

-#  are licensed and made available under the terms and conditions of the BSD License

-#  which accompanies this distribution.  The full text of the license may be found at

-#  http://opensource.org/licenses/bsd-license.php

-#

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-#

-

-################################################################################

-#

-# FD Section

-# The [FD] Section is made up of the definition statements and a

-# description of what goes into  the Flash Device Image.  Each FD section

-# defines one flash "device" image.  A flash device image may be one of

-# the following: Removable media bootable image (like a boot floppy

-# image,) an Option ROM image (that would be "flashed" into an add-in

-# card,) a System "Flash"  image (that would be burned into a system's

-# flash) or an Update ("Capsule") image that will be used to update and

-# existing system flash.

-#

-################################################################################

-

-[FD.Sec_ArmPlatform_EFI]

-BaseAddress   = 0xEC000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.

-Size          = 0x00020000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device

-ErasePolarity = 1

-BlockSize     = 0x00002000

-NumBlocks     = 0x10

-

-################################################################################

-#

-# Following are lists of FD Region layout which correspond to the locations of different

-# images within the flash device.

-#

-# Regions must be defined in ascending order and may not overlap.

-#

-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by

-# the pipe "|" character, followed by the size of the region, also in hex with the leading

-# "0x" characters. Like:

-# Offset|Size

-# PcdOffsetCName|PcdSizeCName

-# RegionType <FV, DATA, or FILE>

-#

-################################################################################

-

-0x00000000|0x00020000

-gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize

-FV = FVMAIN_SEC

-

-

-[FD.ArmPlatform_EFI]

-BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.

-Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device

-ErasePolarity = 1

-

-# This one is tricky, it must be: BlockSize * NumBlocks = Size

-BlockSize     = 0x00001000

-NumBlocks     = 0x200

-

-################################################################################

-#

-# Following are lists of FD Region layout which correspond to the locations of different

-# images within the flash device.

-#

-# Regions must be defined in ascending order and may not overlap.

-#

-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by

-# the pipe "|" character, followed by the size of the region, also in hex with the leading

-# "0x" characters. Like:

-# Offset|Size

-# PcdOffsetCName|PcdSizeCName

-# RegionType <FV, DATA, or FILE>

-#

-################################################################################

-

-0x00000000|0x00200000

-gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize

-FV = FVMAIN_COMPACT

-

-

-################################################################################

-#

-# FV Section

-#

-# [FV] section is used to define what components or modules are placed within a flash

-# device file.  This section also defines order the components and modules are positioned

-# within the image.  The [FV] section consists of define statements, set statements and

-# module statements.

-#

-################################################################################

-

-[FV.FVMAIN_SEC]

-FvAlignment        = 8

-ERASE_POLARITY     = 1

-MEMORY_MAPPED      = TRUE

-STICKY_WRITE       = TRUE

-LOCK_CAP           = TRUE

-LOCK_STATUS        = TRUE

-WRITE_DISABLED_CAP = TRUE

-WRITE_ENABLED_CAP  = TRUE

-WRITE_STATUS       = TRUE

-WRITE_LOCK_CAP     = TRUE

-WRITE_LOCK_STATUS  = TRUE

-READ_DISABLED_CAP  = TRUE

-READ_ENABLED_CAP   = TRUE

-READ_STATUS        = TRUE

-READ_LOCK_CAP      = TRUE

-READ_LOCK_STATUS   = TRUE

-

-  INF ArmPlatformPkg/Sec/Sec.inf

-

-

-[FV.FvMain]

-BlockSize          = 0x40

-NumBlocks          = 0         # This FV gets compressed so make it just big enough

-FvAlignment        = 8         # FV alignment and FV attributes setting.

-ERASE_POLARITY     = 1

-MEMORY_MAPPED      = TRUE

-STICKY_WRITE       = TRUE

-LOCK_CAP           = TRUE

-LOCK_STATUS        = TRUE

-WRITE_DISABLED_CAP = TRUE

-WRITE_ENABLED_CAP  = TRUE

-WRITE_STATUS       = TRUE

-WRITE_LOCK_CAP     = TRUE

-WRITE_LOCK_STATUS  = TRUE

-READ_DISABLED_CAP  = TRUE

-READ_ENABLED_CAP   = TRUE

-READ_STATUS        = TRUE

-READ_LOCK_CAP      = TRUE

-READ_LOCK_STATUS   = TRUE

-FvNameGuid         = 8fa66cd0-f773-4f26-8f9f-5e54d0804c68

-

-  INF MdeModulePkg/Core/Dxe/DxeMain.inf

-

-  #

-  # PI DXE Drivers producing Architectural Protocols (EFI Services)

-  #

-  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf

-  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf

-  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf

-  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf

-  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf

-  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf

-  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf

-  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf

-  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf

-  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

-

-  # Simple TextIn/TextOut for UEFI Terminal

-  INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf

-

-  #

-  # Semi-hosting filesystem (Required the Hardware Debugger to be connected)

-  #

-  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf

-

-  #

-  # FAT filesystem + GPT/MBR partitioning

-  #

-  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf

-  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

-  INF FatBinPkg/EnhancedFatDxe/Fat.inf

-  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

-

-  #

-  # UEFI application (Shell Embedded Boot Loader)

-  #

-  INF EmbeddedPkg/Ebl/Ebl.inf

-

-  #

-  # Bds

-  #

-  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf

-  INF ArmPlatformPkg/Bds/Bds.inf

-

-  # Legacy Linux Loader

-  INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf

-

-[FV.FVMAIN_COMPACT]

-FvAlignment        = 8

-ERASE_POLARITY     = 1

-MEMORY_MAPPED      = TRUE

-STICKY_WRITE       = TRUE

-LOCK_CAP           = TRUE

-LOCK_STATUS        = TRUE

-WRITE_DISABLED_CAP = TRUE

-WRITE_ENABLED_CAP  = TRUE

-WRITE_STATUS       = TRUE

-WRITE_LOCK_CAP     = TRUE

-WRITE_LOCK_STATUS  = TRUE

-READ_DISABLED_CAP  = TRUE

-READ_ENABLED_CAP   = TRUE

-READ_STATUS        = TRUE

-READ_LOCK_CAP      = TRUE

-READ_LOCK_STATUS   = TRUE

-

-  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf

-  INF MdeModulePkg/Core/Pei/PeiMain.inf

-  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf

-  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf

-  INF ArmPkg/Drivers/CpuPei/CpuPei.inf

-  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf

-  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf

-  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf

-  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

-

-  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {

-    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {

-      SECTION FV_IMAGE = FVMAIN

-    }

-  }

-

-

-################################################################################

-#

-# Rules are use with the [FV] section's module INF type to define

-# how an FFS file is created for a given INF file. The following Rule are the default

-# rules for the different module type. User can add the customized rules to define the

-# content of the FFS file.

-#

-################################################################################

-

-

-############################################################################

-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #

-############################################################################

-#

-#[Rule.Common.DXE_DRIVER]

-#  FILE DRIVER = $(NAMED_GUID) {

-#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

-#    COMPRESS PI_STD {

-#      GUIDED {

-#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

-#        UI       STRING="$(MODULE_NAME)" Optional

-#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

-#      }

-#    }

-#  }

-#

-############################################################################

-

-[Rule.ARM.SEC]

-  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

-    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi

-  }

-

-# The AArch64 Vector Table requires a 2K alignment that is not supported by the FDF specification.

-# It is the reason 4K is used instead of 2K for the module alignment.

-[Rule.AARCH64.SEC]

-  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

-    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi

-  }

-

-[Rule.Common.PEI_CORE]

-  FILE PEI_CORE = $(NAMED_GUID) {

-    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi

-    UI     STRING ="$(MODULE_NAME)" Optional

-  }

-

-[Rule.Common.PEIM]

-  FILE PEIM = $(NAMED_GUID) {

-     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex

-     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi

-     UI       STRING="$(MODULE_NAME)" Optional

-  }

-

-[Rule.Common.PEIM.TIANOCOMPRESSED]

-  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {

-    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex

-    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {

-      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

-      UI        STRING="$(MODULE_NAME)" Optional

-    }

-  }

-

-[Rule.Common.DXE_CORE]

-  FILE DXE_CORE = $(NAMED_GUID) {

-    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi

-    UI       STRING="$(MODULE_NAME)" Optional

-  }

-

-[Rule.Common.UEFI_DRIVER]

-  FILE DRIVER = $(NAMED_GUID) {

-    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

-    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

-    UI           STRING="$(MODULE_NAME)" Optional

-  }

-

-[Rule.Common.UEFI_DRIVER.BINARY]

-  FILE DRIVER = $(NAMED_GUID) {

-    DXE_DEPEX DXE_DEPEX Optional      |.depex

-    PE32      PE32                    |.efi

-    UI        STRING="$(MODULE_NAME)" Optional

-    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

-  }

-

-[Rule.Common.DXE_DRIVER]

-  FILE DRIVER = $(NAMED_GUID) {

-    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

-    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

-    UI           STRING="$(MODULE_NAME)" Optional

-  }

-

-[Rule.Common.DXE_RUNTIME_DRIVER]

-  FILE DRIVER = $(NAMED_GUID) {

-    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

-    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

-    UI           STRING="$(MODULE_NAME)" Optional

-  }

-

-[Rule.Common.UEFI_APPLICATION]

-  FILE APPLICATION = $(NAMED_GUID) {

-    UI     STRING ="$(MODULE_NAME)" Optional

-    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi

-  }