diff options
| author | Ronald Cron <ronald.cron@arm.com> | 2014-10-27 15:37:37 +0000 |
|---|---|---|
| committer | oliviermartin <oliviermartin@Edk2> | 2014-10-27 15:37:37 +0000 |
| commit | ab716191081e676179c5d386c706e05e2d940db5 (patch) | |
| tree | a6f9a5068ae395939f949e94e6a549b2980a32d2 /ArmPlatformPkg/Include | |
| parent | 5f81a62094a12a435e677a1b6e5fbedc76a6a978 (diff) | |
| download | edk2-platforms-ab716191081e676179c5d386c706e05e2d940db5.tar.xz | |
EmbeddedPkg: Clarify the declaration of SerialPortSetControl()
Rework of PL011UartSetControl() as a consequence as well as update of
function header comment blocks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16251 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'ArmPlatformPkg/Include')
| -rw-r--r-- | ArmPlatformPkg/Include/Drivers/PL011Uart.h | 36 |
1 files changed, 26 insertions, 10 deletions
diff --git a/ArmPlatformPkg/Include/Drivers/PL011Uart.h b/ArmPlatformPkg/Include/Drivers/PL011Uart.h index a36347e529..f8e4a083aa 100644 --- a/ArmPlatformPkg/Include/Drivers/PL011Uart.h +++ b/ArmPlatformPkg/Include/Drivers/PL011Uart.h @@ -1,6 +1,6 @@ /** @file
*
-* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2014, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
@@ -100,21 +100,37 @@ PL011UartInitializePort ( );
/**
- Set the serial device control bits.
- @param UartBase The base address of the PL011 UART.
- @param Control Control bits which are to be set on the serial device.
-
- @retval EFI_SUCCESS The new control bits were set on the serial device.
- @retval EFI_UNSUPPORTED The serial device does not support this operation.
- @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+ Assert or deassert the control signals on a serial port.
+ The following control signals are set according their bit settings :
+ . Request to Send
+ . Data Terminal Ready
+
+ @param[in] UartBase UART registers base address
+ @param[in] Control The following bits are taken into account :
+ . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
+ "Request To Send" control signal if this bit is
+ equal to one/zero.
+ . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
+ the "Data Terminal Ready" control signal if this
+ bit is equal to one/zero.
+ . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
+ the hardware loopback if this bit is equal to
+ one/zero.
+ . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
+ . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
+ disable the hardware flow control based on CTS (Clear
+ To Send) and RTS (Ready To Send) control signals.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
**/
RETURN_STATUS
EFIAPI
PL011UartSetControl (
- IN UINTN UartBase,
- IN UINT32 Control
+ IN UINTN UartBase,
+ IN UINT32 Control
);
/**
|