EmbeddedPkg: Introduced 'SerialPortExtLib.h'

EmbeddedPkg/SerialDxe was not allowing to set/get the control of the
Serial connection because the needed functions were not exposed in
SerialPortLib.h.
This commit introduces an additional library to extend the SerialPort
features.

Signed-off-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13773 6f19259b-4bc3-4df7-8a09-765794883524

2 files changed, 83 insertions, 1 deletions

diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
index 2395ffd6c8..7ccd09bd48 100644
--- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
+++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
@@ -19,11 +19,12 @@
 #include <Library/IoLib.h>
 #include <Library/PcdLib.h>
 #include <Library/SerialPortLib.h>
+#include <Library/SerialPortExtLib.h>
 
 #include <Drivers/PL011Uart.h>
 
 
-/*
+/**
 
   Programmed hardware of Serial port.
 
@@ -101,3 +102,83 @@ SerialPortPoll (
 {
   return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase));
 }
+
+/**
+  Set new attributes to PL011.
+
+  @param  BaudRate                The baud rate of the serial device. If the baud rate is not supported,
+                                  the speed will be reduced down to the nearest supported one and the
+                                  variable's value will be updated accordingly.
+  @param  ReceiveFifoDepth        The number of characters the device will buffer on input. If the specified
+                                  value is not supported, the variable's value will be reduced down to the
+                                  nearest supported one.
+  @param  Timeout                 If applicable, the number of microseconds the device will wait
+                                  before timing out a Read or a Write operation.
+  @param  Parity                  If applicable, this is the EFI_PARITY_TYPE that is computer or checked
+                                  as each character is transmitted or received. If the device does not
+                                  support parity, the value is the default parity value.
+  @param  DataBits                The number of data bits in each character
+  @param  StopBits                If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character.
+                                  If the device does not support stop bits, the value is the default stop
+                                  bit value.
+
+  @retval EFI_SUCCESS             All attributes were set correctly on the serial device.
+  @retval EFI_INVALID_PARAMETERS  One or more of the attributes has an unsupported value.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+  IN UINT64              BaudRate,
+  IN UINT32              ReceiveFifoDepth,
+  IN UINT32              Timeout,
+  IN EFI_PARITY_TYPE     Parity,
+  IN UINT8               DataBits,
+  IN EFI_STOP_BITS_TYPE  StopBits
+  )
+{
+  return PL011UartInitializePort (
+        (UINTN)PcdGet64 (PcdSerialRegisterBase),
+        BaudRate,
+        ReceiveFifoDepth,
+        Parity,
+        DataBits,
+        StopBits);
+}
+
+/**
+  Set the serial device control bits.
+
+  @param  Control                 Control bits which are to be set on the serial device.
+
+  @retval EFI_SUCCESS             The new control bits were set on the serial device.
+  @retval EFI_UNSUPPORTED         The serial device does not support this operation.
+  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+  IN UINT32                  Control
+  )
+{
+  return PL011UartSetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
+}
+
+/**
+  Get the serial device control bits.
+
+  @param  Control                 Control signals read from the serial device.
+
+  @retval EFI_SUCCESS             The control bits were read from the serial device.
+  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+  OUT UINT32                  *Control
+  )
+{
+  return PL011UartGetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
+}
diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
index f3c7285af5..13168dfc4c 100644
--- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
+++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
@@ -30,6 +30,7 @@
   PcdLib

 

 [Packages]

+  EmbeddedPkg/EmbeddedPkg.dec

   MdePkg/MdePkg.dec

   MdeModulePkg/MdeModulePkg.dec

   ArmPlatformPkg/ArmPlatformPkg.dec