ArmRealViewEbPkg: Delete the deprecated package 'ArmRealViewEbPkg'

ARM RealView Emulation Board is supporting by the package: ArmPlatformPkg/ArmRealViewEbPkg/



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12337 6f19259b-4bc3-4df7-8a09-765794883524

2 files changed, 0 insertions, 537 deletions

diff --git a/ArmRealViewEbPkg/InterruptDxe/InterruptDxe.c b/ArmRealViewEbPkg/InterruptDxe/InterruptDxe.c
deleted file mode 100755
index b9e8256f82..0000000000
--- a/ArmRealViewEbPkg/InterruptDxe/InterruptDxe.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*++

-

-Copyright (c) 2009, Hewlett-Packard Company. All rights reserved.<BR>

-Portions copyright (c) 2010, Apple Inc. All rights reserved.<BR>                                                         

-This program and the accompanying materials                          

-are licensed and made available under the terms and conditions of the BSD License         

-which accompanies this distribution.  The full text of the license may be found at        

-http://opensource.org/licenses/bsd-license.php                                            

-                                                                                          

-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.   

-

-Module Name:

-

-  Gic.c

-

-Abstract:

-

-  Driver implementing the GIC interrupt controller protocol

-

---*/

-

-#include <PiDxe.h>

-

-#include <Library/BaseLib.h>

-#include <Library/DebugLib.h>

-#include <Library/BaseMemoryLib.h>

-#include <Library/UefiBootServicesTableLib.h>

-#include <Library/UefiLib.h>

-#include <Library/PcdLib.h>

-#include <Library/IoLib.h>

-

-#include <Protocol/Cpu.h>

-#include <Protocol/HardwareInterrupt.h>

-

-

-//

-// EB board definitions

-//

-#define EB_GIC1_CPU_INTF_BASE   0x10040000

-#define EB_GIC1_DIST_BASE       0x10041000

-#define EB_GIC2_CPU_INTF_BASE   0x10050000

-#define EB_GIC2_DIST_BASE       0x10051000

-#define EB_GIC3_CPU_INTF_BASE   0x10060000

-#define EB_GIC3_DIST_BASE       0x10061000

-#define EB_GIC4_CPU_INTF_BASE   0x10070000

-#define EB_GIC5_DIST_BASE       0x10071000

-

-// number of interrupts sources supported by each GIC on the EB

-#define EB_NUM_GIC_INTERRUPTS   96  

-

-// number of 32-bit registers needed to represent those interrupts as a bit

-// (used for enable set, enable clear, pending set, pending clear, and active regs)

-#define EB_NUM_GIC_REG_PER_INT_BITS   (EB_NUM_GIC_INTERRUPTS / 32)

-

-// number of 32-bit registers needed to represent those interrupts as two bits

-// (used for configuration reg)

-#define EB_NUM_GIC_REG_PER_INT_CFG    (EB_NUM_GIC_INTERRUPTS / 16)

-

-// number of 32-bit registers needed to represent interrupts as 8-bit priority field

-// (used for priority regs)

-#define EB_NUM_GIC_REG_PER_INT_BYTES  (EB_NUM_GIC_INTERRUPTS / 4)

-

-#define GIC_DEFAULT_PRIORITY  0x80

-

-//

-// GIC definitions

-//

-

-// Distributor

-#define GIC_ICDDCR          0x000 // Distributor Control Register

-#define GIC_ICDICTR         0x004 // Interrupt Controller Type Register

-#define GIC_ICDIIDR         0x008 // Implementer Identification Register

-

-// each reg base below repeats for EB_NUM_GIC_REG_PER_INT_BITS (see GIC spec)

-#define GIC_ICDISR          0x080 // Interrupt Security Registers

-#define GIC_ICDISER         0x100 // Interrupt Set-Enable Registers

-#define GIC_ICDICER         0x180 // Interrupt Clear-Enable Registers

-#define GIC_ICDSPR          0x200 // Interrupt Set-Pending Registers

-#define GIC_ICDCPR          0x280 // Interrupt Clear-Pending Registers

-#define GIC_ICDABR          0x300 // Active Bit Registers

-

-// each reg base below repeats for EB_NUM_GIC_REG_PER_INT_BYTES

-#define GIC_ICDIPR          0x400 // Interrupt Priority Registers

-

-// each reg base below repeats for EB_NUM_GIC_INTERRUPTS

-#define GIC_ICDIPTR         0x800 // Interrupt Processor Target Registers

-#define GIC_ICDICFR         0xC00 // Interrupt Configuration Registers

-

-// just one of these

-#define GIC_ICDSGIR         0xF00 // Software Generated Interrupt Register

-

-

-// Cpu interface

-#define GIC_ICCICR          0x00  // CPU Interface Controler Register

-#define GIC_ICCPMR          0x04  // Interrupt Priority Mask Register

-#define GIC_ICCBPR          0x08  // Binary Point Register

-#define GIC_ICCIAR          0x0C  // Interrupt Acknowledge Register

-#define GIC_ICCEIOR         0x10  // End Of Interrupt Register

-#define GIC_ICCRPR          0x14  // Running Priority Register

-#define GIC_ICCPIR          0x18  // Highest Pending Interrupt Register

-#define GIC_ICCABPR         0x1C  // Aliased Binary Point Register

-#define GIC_ICCIDR          0xFC  // Identification Register

-

-extern EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol;

-

-//

-// Notifications

-//

-VOID      *CpuProtocolNotificationToken = NULL;

-EFI_EVENT CpuProtocolNotificationEvent  = (EFI_EVENT)NULL;

-EFI_EVENT EfiExitBootServicesEvent      = (EFI_EVENT)NULL;

-

-

-HARDWARE_INTERRUPT_HANDLER  gRegisteredInterruptHandlers[EB_NUM_GIC_INTERRUPTS];

-

-/**

-  Register Handler for the specified interrupt source.

-

-  @param This     Instance pointer for this protocol

-  @param Source   Hardware source of the interrupt

-  @param Handler  Callback for interrupt. NULL to unregister

-

-  @retval EFI_SUCCESS Source was updated to support Handler.

-  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.

-

-**/

-EFI_STATUS

-EFIAPI

-RegisterInterruptSource (

-  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,

-  IN HARDWARE_INTERRUPT_SOURCE          Source,

-  IN HARDWARE_INTERRUPT_HANDLER         Handler

-  )

-{

-  if (Source > EB_NUM_GIC_INTERRUPTS) {

-    ASSERT(FALSE);

-    return EFI_UNSUPPORTED;

-  } 

-  

-  if ((Handler == NULL) && (gRegisteredInterruptHandlers[Source] == NULL)) {

-    return EFI_INVALID_PARAMETER;

-  }

-

-  if ((Handler != NULL) && (gRegisteredInterruptHandlers[Source] != NULL)) {

-    return EFI_ALREADY_STARTED;

-  }

-

-  gRegisteredInterruptHandlers[Source] = Handler;

-  return This->EnableInterruptSource(This, Source);

-}

-

-

-/**

-  Enable interrupt source Source.

-

-  @param This     Instance pointer for this protocol

-  @param Source   Hardware source of the interrupt

-

-  @retval EFI_SUCCESS       Source interrupt enabled.

-  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.

-

-**/

-EFI_STATUS

-EFIAPI

-EnableInterruptSource (

-  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,

-  IN HARDWARE_INTERRUPT_SOURCE          Source

-  )

-{

-  UINT32    RegOffset;

-  UINTN     RegShift;

-  

-  if (Source > EB_NUM_GIC_INTERRUPTS) {

-    ASSERT(FALSE);

-    return EFI_UNSUPPORTED;

-  }

-  

-  // calculate enable register offset and bit position

-  RegOffset = Source / 32;

-  RegShift = Source % 32;

-

-  // write set-enable register

-  MmioWrite32 (EB_GIC1_DIST_BASE+GIC_ICDISER+(4*RegOffset), 1 << RegShift);

-  

-  return EFI_SUCCESS;

-}

-

-

-/**

-  Disable interrupt source Source.

-

-  @param This     Instance pointer for this protocol

-  @param Source   Hardware source of the interrupt

-

-  @retval EFI_SUCCESS       Source interrupt disabled.

-  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.

-

-**/

-EFI_STATUS

-EFIAPI

-DisableInterruptSource (

-  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,

-  IN HARDWARE_INTERRUPT_SOURCE          Source

-  )

-{

-  UINT32    RegOffset;

-  UINTN     RegShift;

-  

-  if (Source > EB_NUM_GIC_INTERRUPTS) {

-    ASSERT(FALSE);

-    return EFI_UNSUPPORTED;

-  }

-  

-  // calculate enable register offset and bit position

-  RegOffset = Source / 32;

-  RegShift = Source % 32;

-

-  // write set-enable register

-  MmioWrite32 (EB_GIC1_DIST_BASE+GIC_ICDICER+(4*RegOffset), 1 << RegShift);

-  

-  return EFI_SUCCESS;

-}

-

-

-

-/**

-  Return current state of interrupt source Source.

-

-  @param This     Instance pointer for this protocol

-  @param Source   Hardware source of the interrupt

-  @param InterruptState  TRUE: source enabled, FALSE: source disabled.

-

-  @retval EFI_SUCCESS       InterruptState is valid

-  @retval EFI_DEVICE_ERROR  InterruptState is not valid

-

-**/

-EFI_STATUS

-EFIAPI

-GetInterruptSourceState (

-  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,

-  IN HARDWARE_INTERRUPT_SOURCE          Source,

-  IN BOOLEAN                            *InterruptState

-  )

-{

-  UINT32    RegOffset;

-  UINTN     RegShift;

-  

-  if (Source > EB_NUM_GIC_INTERRUPTS) {

-    ASSERT(FALSE);

-    return EFI_UNSUPPORTED;

-  }

-  

-  // calculate enable register offset and bit position

-  RegOffset = Source / 32;

-  RegShift = Source % 32;

-    

-  if ((MmioRead32 (EB_GIC1_DIST_BASE+GIC_ICDISER+(4*RegOffset)) & (1<<RegShift)) == 0) {

-    *InterruptState = FALSE;

-  } else {

-    *InterruptState = TRUE;

-  }

-  

-  return EFI_SUCCESS;

-}

-

-/**

-  Signal to the hardware that the End Of Intrrupt state 

-  has been reached.

-

-  @param This     Instance pointer for this protocol

-  @param Source   Hardware source of the interrupt

-

-  @retval EFI_SUCCESS       Source interrupt EOI'ed.

-  @retval EFI_DEVICE_ERROR  Hardware could not be programmed.

-

-**/

-EFI_STATUS

-EFIAPI

-EndOfInterrupt (

-  IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,

-  IN HARDWARE_INTERRUPT_SOURCE          Source

-  )

-{

-  if (Source > EB_NUM_GIC_INTERRUPTS) {

-    ASSERT(FALSE);

-    return EFI_UNSUPPORTED;

-  }

-

-  MmioWrite32 (EB_GIC1_CPU_INTF_BASE+GIC_ICCEIOR, Source);

-  return EFI_SUCCESS;

-}

-

-

-/**

-  EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.

-

-  @param  InterruptType    Defines the type of interrupt or exception that

-                           occurred on the processor.This parameter is processor architecture specific.

-  @param  SystemContext    A pointer to the processor context when

-                           the interrupt occurred on the processor.

-

-  @return None

-

-**/

-VOID

-EFIAPI

-IrqInterruptHandler (

-  IN EFI_EXCEPTION_TYPE           InterruptType,

-  IN EFI_SYSTEM_CONTEXT           SystemContext

-  )

-{

-  UINT32                      GicInterrupt;

-  HARDWARE_INTERRUPT_HANDLER  InterruptHandler;

-

-  GicInterrupt = MmioRead32 (EB_GIC1_CPU_INTF_BASE + GIC_ICCIAR);

-  if (GicInterrupt >= EB_NUM_GIC_INTERRUPTS) {

-    MmioWrite32 (EB_GIC1_CPU_INTF_BASE+GIC_ICCEIOR, GicInterrupt);

-  }

-  

-  InterruptHandler = gRegisteredInterruptHandlers[GicInterrupt];

-  if (InterruptHandler != NULL) {

-    // Call the registered interrupt handler.

-    InterruptHandler (GicInterrupt, SystemContext);

-  } else {

-    DEBUG ((EFI_D_ERROR, "Spurious GIC interrupt: %x\n", GicInterrupt));

-  }

-

-  EndOfInterrupt (&gHardwareInterruptProtocol, GicInterrupt);

-}

-

-

-//

-// Making this global saves a few bytes in image size

-//

-EFI_HANDLE  gHardwareInterruptHandle = NULL;

-

-//

-// The protocol instance produced by this driver

-//

-EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol = {

-  RegisterInterruptSource,

-  EnableInterruptSource,

-  DisableInterruptSource,

-  GetInterruptSourceState,

-  EndOfInterrupt

-};

-

-

-/**

-  Shutdown our hardware

-  

-  DXE Core will disable interrupts and turn off the timer and disable interrupts

-  after all the event handlers have run.

-

-  @param[in]  Event   The Event that is being processed

-  @param[in]  Context Event Context

-**/

-VOID

-EFIAPI

-ExitBootServicesEvent (

-  IN EFI_EVENT  Event,

-  IN VOID       *Context

-  )

-{

-  UINTN    i;

-  

-  for (i = 0; i < EB_NUM_GIC_INTERRUPTS; i++) {

-    DisableInterruptSource (&gHardwareInterruptProtocol, i);

-  }

-}

-

-

-//

-// Notification routines

-//

-VOID

-CpuProtocolInstalledNotification (

-  IN EFI_EVENT   Event,

-  IN VOID        *Context

-  )

-{

-  EFI_STATUS              Status;

-  EFI_CPU_ARCH_PROTOCOL   *Cpu;

-  

-  //

-  // Get the cpu protocol that this driver requires.

-  //

-  Status = gBS->LocateProtocol(&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);

-  ASSERT_EFI_ERROR(Status);

-

-  //

-  // Unregister the default exception handler.

-  //

-  Status = Cpu->RegisterInterruptHandler(Cpu, EXCEPT_ARM_IRQ, NULL);

-  ASSERT_EFI_ERROR(Status);

-

-  //

-  // Register to receive interrupts

-  //

-  Status = Cpu->RegisterInterruptHandler(Cpu, EXCEPT_ARM_IRQ, IrqInterruptHandler);

-  ASSERT_EFI_ERROR(Status);

-}

-

-/**

-  Initialize the state information for the CPU Architectural Protocol

-

-  @param  ImageHandle   of the loaded driver

-  @param  SystemTable   Pointer to the System Table

-

-  @retval EFI_SUCCESS           Protocol registered

-  @retval EFI_OUT_OF_RESOURCES  Cannot allocate protocol data structure

-  @retval EFI_DEVICE_ERROR      Hardware problems

-

-**/

-EFI_STATUS

-InterruptDxeInitialize (

-  IN EFI_HANDLE         ImageHandle,

-  IN EFI_SYSTEM_TABLE   *SystemTable

-  )

-{

-  EFI_STATUS  Status;

-  UINTN      i;

-  UINT32      RegOffset;

-  UINTN       RegShift;

-

-  

-  // Make sure the Interrupt Controller Protocol is not already installed in the system.

-  ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);

-

-  for (i = 0; i < EB_NUM_GIC_INTERRUPTS; i++) {

-    DisableInterruptSource (&gHardwareInterruptProtocol, i);

-    

-    // Set Priority 

-    RegOffset = i / 4;

-    RegShift = (i % 4) * 8;

-    MmioAndThenOr32 (

-      EB_GIC1_DIST_BASE+GIC_ICDIPR+(4*RegOffset), 

-      ~(0xff << RegShift), 

-      GIC_DEFAULT_PRIORITY << RegShift

-      );

-  }

-

-  // configure interrupts for cpu 0

-  for (i = 0; i < EB_NUM_GIC_REG_PER_INT_BYTES; i++) {

-    MmioWrite32 (EB_GIC1_DIST_BASE + GIC_ICDIPTR + (i*4), 0x01010101);

-  }

-

-  // set binary point reg to 0x7 (no preemption)

-  MmioWrite32 (EB_GIC1_CPU_INTF_BASE + GIC_ICCBPR, 0x7);

-

-  // set priority mask reg to 0xff to allow all priorities through

-  MmioWrite32 (EB_GIC1_CPU_INTF_BASE + GIC_ICCPMR, 0xff);

-  

-  // enable gic cpu interface

-  MmioWrite32 (EB_GIC1_CPU_INTF_BASE + GIC_ICCICR, 0x1);

-

-  // enable gic distributor

-  MmioWrite32 (EB_GIC1_DIST_BASE + GIC_ICCICR, 0x1);

-

-  

-  ZeroMem (&gRegisteredInterruptHandlers, sizeof (gRegisteredInterruptHandlers));

-  

-  Status = gBS->InstallMultipleProtocolInterfaces (

-                  &gHardwareInterruptHandle,

-                  &gHardwareInterruptProtocolGuid,   &gHardwareInterruptProtocol,

-                  NULL

-                  );

-  ASSERT_EFI_ERROR (Status);

-  

-  // Set up to be notified when the Cpu protocol is installed.

-  Status = gBS->CreateEvent (EVT_NOTIFY_SIGNAL, TPL_CALLBACK, CpuProtocolInstalledNotification, NULL, &CpuProtocolNotificationEvent);    

-  ASSERT_EFI_ERROR (Status);

-

-  Status = gBS->RegisterProtocolNotify (&gEfiCpuArchProtocolGuid, CpuProtocolNotificationEvent, (VOID *)&CpuProtocolNotificationToken);

-  ASSERT_EFI_ERROR (Status);

-

-  // Register for an ExitBootServicesEvent

-  Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent);

-  ASSERT_EFI_ERROR (Status);

-

-  return Status;

-}

-

diff --git a/ArmRealViewEbPkg/InterruptDxe/InterruptDxe.inf b/ArmRealViewEbPkg/InterruptDxe/InterruptDxe.inf
deleted file mode 100755
index 7479e95997..0000000000
--- a/ArmRealViewEbPkg/InterruptDxe/InterruptDxe.inf
+++ /dev/null
@@ -1,53 +0,0 @@
-#/** @file

-#  

-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

-#  This program and the accompanying materials

-#  are licensed and made available under the terms and conditions of the BSD License

-#  which accompanies this distribution.  The full text of the license may be found at

-#  http://opensource.org/licenses/bsd-license.php

-#  

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-#  

-#**/

-

-[Defines]

-  INF_VERSION                    = 0x00010005

-  BASE_NAME                      = GicInterruptDxe

-  FILE_GUID                      = A7496828-946E-43BF-97D6-AA0272001899

-  MODULE_TYPE                    = DXE_DRIVER

-  VERSION_STRING                 = 1.0

-

-  ENTRY_POINT                    = InterruptDxeInitialize

-

-

-[Sources.common]

-  InterruptDxe.c

-

-

-[Packages]

-  MdePkg/MdePkg.dec

-  EmbeddedPkg/EmbeddedPkg.dec

-  ArmRealViewEbPkg/ArmRealViewEbPkg.dec

-

-[LibraryClasses]

-  BaseLib

-  UefiLib

-  UefiBootServicesTableLib

-  DebugLib

-  PrintLib

-  UefiDriverEntryPoint

-  IoLib

-

-[Guids]

-  

-

-[Protocols]

-  gHardwareInterruptProtocolGuid

-  gEfiCpuArchProtocolGuid

-  

-[FixedPcd.common]

-  gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress

-

-[depex]

-  TRUE