summaryrefslogtreecommitdiff
path: root/DuetPkg/SataControllerDxe
diff options
context:
space:
mode:
authorGuo Mang <mang.guo@intel.com>2017-08-02 09:54:47 +0800
committerGuo Mang <mang.guo@intel.com>2017-09-05 19:45:08 +0800
commit6c128c65b5ec0e5b8b5a0ccb165f3afd29e485f8 (patch)
tree444372d92a0ae8991fe4d15eb3937df43690dfda /DuetPkg/SataControllerDxe
parentb207c6434d7a5a4502975d322312e07017e8a8cb (diff)
downloadedk2-platforms-6c128c65b5ec0e5b8b5a0ccb165f3afd29e485f8.tar.xz
Remove core packages since we can get them from edk2 repository
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Guo Mang <mang.guo@intel.com>
Diffstat (limited to 'DuetPkg/SataControllerDxe')
-rw-r--r--DuetPkg/SataControllerDxe/ComponentName.c176
-rw-r--r--DuetPkg/SataControllerDxe/SataController.c1007
-rw-r--r--DuetPkg/SataControllerDxe/SataController.h542
-rw-r--r--DuetPkg/SataControllerDxe/SataControllerDxe.inf49
4 files changed, 0 insertions, 1774 deletions
diff --git a/DuetPkg/SataControllerDxe/ComponentName.c b/DuetPkg/SataControllerDxe/ComponentName.c
deleted file mode 100644
index 57cd3c88d3..0000000000
--- a/DuetPkg/SataControllerDxe/ComponentName.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/** @file
- UEFI Component Name(2) protocol implementation for Sata Controller driver.
-
- Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "SataController.h"
-
-//
-/// EFI Component Name Protocol
-///
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gSataControllerComponentName = {
- SataControllerComponentNameGetDriverName,
- SataControllerComponentNameGetControllerName,
- "eng"
-};
-
-//
-/// EFI Component Name 2 Protocol
-///
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gSataControllerComponentName2 = {
- (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) SataControllerComponentNameGetDriverName,
- (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) SataControllerComponentNameGetControllerName,
- "en"
-};
-
-//
-/// Driver Name Strings
-///
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSataControllerDriverNameTable[] = {
- {
- "eng;en",
- (CHAR16 *)L"Sata Controller Init Driver"
- },
- {
- NULL,
- NULL
- }
-};
-
-///
-/// Controller Name Strings
-///
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSataControllerControllerNameTable[] = {
- {
- "eng;en",
- (CHAR16 *)L"Sata Controller"
- },
- {
- NULL,
- NULL
- }
-};
-
-/**
- Retrieves a Unicode string that is the user readable name of the UEFI Driver.
-
- @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- @param Language A pointer to a three character ISO 639-2 language identifier.
- This is the language of the driver name that that the caller
- is requesting, and it must match one of the languages specified
- in SupportedLanguages. The number of languages supported by a
- driver is up to the driver writer.
- @param DriverName A pointer to the Unicode string to return. This Unicode string
- is the name of the driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by This
- and the language specified by Language was returned
- in DriverName.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This does not support the
- language specified by Language.
-**/
-EFI_STATUS
-EFIAPI
-SataControllerComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-{
- return LookupUnicodeString2 (
- Language,
- This->SupportedLanguages,
- mSataControllerDriverNameTable,
- DriverName,
- (BOOLEAN)(This == &gSataControllerComponentName)
- );
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by an UEFI Driver.
-
- @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- @param ControllerHandle The handle of a controller that the driver specified by
- This is managing. This handle specifies the controller
- whose name is to be returned.
- @param ChildHandle OPTIONAL The handle of the child controller to retrieve the name
- of. This is an optional parameter that may be NULL. It
- will be NULL for device drivers. It will also be NULL
- for a bus drivers that wish to retrieve the name of the
- bus controller. It will not be NULL for a bus driver
- that wishes to retrieve the name of a child controller.
- @param Language A pointer to a three character ISO 639-2 language
- identifier. This is the language of the controller name
- that that the caller is requesting, and it must match one
- of the languages specified in SupportedLanguages. The
- number of languages supported by a driver is up to the
- driver writer.
- @param ControllerName A pointer to the Unicode string to return. This Unicode
- string is the name of the controller specified by
- ControllerHandle and ChildHandle in the language
- specified by Language from the point of view of the
- driver specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in the
- language specified by Language for the driver
- specified by This was returned in DriverName.
- @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
- @retval EFI_UNSUPPORTED The driver specified by This does not support the
- language specified by Language.
-**/
-EFI_STATUS
-EFIAPI
-SataControllerComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-{
- EFI_STATUS Status;
-
- //
- // Make sure this driver is currently managing ControllHandle
- //
- Status = EfiTestManagedDevice (
- ControllerHandle,
- gSataControllerDriverBinding.DriverBindingHandle,
- &gEfiPciIoProtocolGuid
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (ChildHandle != NULL) {
- return EFI_UNSUPPORTED;
- }
-
- return LookupUnicodeString2 (
- Language,
- This->SupportedLanguages,
- mSataControllerControllerNameTable,
- ControllerName,
- (BOOLEAN)(This == &gSataControllerComponentName)
- );
-}
diff --git a/DuetPkg/SataControllerDxe/SataController.c b/DuetPkg/SataControllerDxe/SataController.c
deleted file mode 100644
index 1807c88224..0000000000
--- a/DuetPkg/SataControllerDxe/SataController.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/** @file
- This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.
-
- Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "SataController.h"
-
-///
-/// EFI_DRIVER_BINDING_PROTOCOL instance
-///
-EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding = {
- SataControllerSupported,
- SataControllerStart,
- SataControllerStop,
- 0xa,
- NULL,
- NULL
-};
-
-/**
- Read AHCI Operation register.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The operation register offset.
-
- @return The register content read.
-
-**/
-UINT32
-EFIAPI
-AhciReadReg (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT32 Offset
- )
-{
- UINT32 Data;
-
- ASSERT (PciIo != NULL);
-
- Data = 0;
-
- PciIo->Mem.Read (
- PciIo,
- EfiPciIoWidthUint32,
- AHCI_BAR_INDEX,
- (UINT64) Offset,
- 1,
- &Data
- );
-
- return Data;
-}
-
-/**
- Write AHCI Operation register.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The operation register offset.
- @param Data The data used to write down.
-
-**/
-VOID
-EFIAPI
-AhciWriteReg (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT32 Offset,
- IN UINT32 Data
- )
-{
- ASSERT (PciIo != NULL);
-
- PciIo->Mem.Write (
- PciIo,
- EfiPciIoWidthUint32,
- AHCI_BAR_INDEX,
- (UINT64) Offset,
- 1,
- &Data
- );
-
- return;
-}
-
-/**
- This function is used to calculate the best PIO mode supported by specific IDE device
-
- @param IdentifyData The identify data of specific IDE device.
- @param DisPioMode Disqualified PIO modes collection.
- @param SelectedMode Available PIO modes collection.
-
- @retval EFI_SUCCESS Best PIO modes are returned.
- @retval EFI_UNSUPPORTED The device doesn't support PIO mode,
- or all supported modes have been disqualified.
-**/
-EFI_STATUS
-CalculateBestPioMode (
- IN EFI_IDENTIFY_DATA *IdentifyData,
- IN UINT16 *DisPioMode OPTIONAL,
- OUT UINT16 *SelectedMode
- )
-{
- UINT16 PioMode;
- UINT16 AdvancedPioMode;
- UINT16 Temp;
- UINT16 Index;
- UINT16 MinimumPioCycleTime;
-
- Temp = 0xff;
-
- PioMode = (UINT8) (((ATA5_IDENTIFY_DATA *) (&(IdentifyData->AtaData)))->pio_cycle_timing >> 8);
-
- //
- // See whether Identify Data word 64 - 70 are valid
- //
- if ((IdentifyData->AtaData.field_validity & 0x02) == 0x02) {
-
- AdvancedPioMode = IdentifyData->AtaData.advanced_pio_modes;
- DEBUG ((EFI_D_INFO, "CalculateBestPioMode: AdvancedPioMode = %x\n", AdvancedPioMode));
-
- for (Index = 0; Index < 8; Index++) {
- if ((AdvancedPioMode & 0x01) != 0) {
- Temp = Index;
- }
-
- AdvancedPioMode >>= 1;
- }
-
- //
- // If Temp is modified, mean the advanced_pio_modes is not zero;
- // if Temp is not modified, mean there is no advanced PIO mode supported,
- // the best PIO Mode is the value in pio_cycle_timing.
- //
- if (Temp != 0xff) {
- AdvancedPioMode = (UINT16) (Temp + 3);
- } else {
- AdvancedPioMode = PioMode;
- }
-
- //
- // Limit the PIO mode to at most PIO4.
- //
- PioMode = (UINT16) MIN (AdvancedPioMode, 4);
-
- MinimumPioCycleTime = IdentifyData->AtaData.min_pio_cycle_time_with_flow_control;
-
- if (MinimumPioCycleTime <= 120) {
- PioMode = (UINT16) MIN (4, PioMode);
- } else if (MinimumPioCycleTime <= 180) {
- PioMode = (UINT16) MIN (3, PioMode);
- } else if (MinimumPioCycleTime <= 240) {
- PioMode = (UINT16) MIN (2, PioMode);
- } else {
- PioMode = 0;
- }
-
- //
- // Degrade the PIO mode if the mode has been disqualified
- //
- if (DisPioMode != NULL) {
- if (*DisPioMode < 2) {
- return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2
- }
-
- if (PioMode >= *DisPioMode) {
- PioMode = (UINT16) (*DisPioMode - 1);
- }
- }
-
- if (PioMode < 2) {
- *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;
- } else {
- *SelectedMode = PioMode; // ATA_PIO_MODE_2 to ATA_PIO_MODE_4;
- }
-
- } else {
- //
- // Identify Data word 64 - 70 are not valid
- // Degrade the PIO mode if the mode has been disqualified
- //
- if (DisPioMode != NULL) {
- if (*DisPioMode < 2) {
- return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2
- }
-
- if (PioMode == *DisPioMode) {
- PioMode--;
- }
- }
-
- if (PioMode < 2) {
- *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;
- } else {
- *SelectedMode = 2; // ATA_PIO_MODE_2;
- }
-
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is used to calculate the best UDMA mode supported by specific IDE device
-
- @param IdentifyData The identify data of specific IDE device.
- @param DisUDmaMode Disqualified UDMA modes collection.
- @param SelectedMode Available UDMA modes collection.
-
- @retval EFI_SUCCESS Best UDMA modes are returned.
- @retval EFI_UNSUPPORTED The device doesn't support UDMA mode,
- or all supported modes have been disqualified.
-**/
-EFI_STATUS
-CalculateBestUdmaMode (
- IN EFI_IDENTIFY_DATA *IdentifyData,
- IN UINT16 *DisUDmaMode OPTIONAL,
- OUT UINT16 *SelectedMode
- )
-{
- UINT16 TempMode;
- UINT16 DeviceUDmaMode;
-
- DeviceUDmaMode = 0;
-
- //
- // Check whether the WORD 88 (supported UltraDMA by drive) is valid
- //
- if ((IdentifyData->AtaData.field_validity & 0x04) == 0x00) {
- return EFI_UNSUPPORTED;
- }
-
- DeviceUDmaMode = IdentifyData->AtaData.ultra_dma_mode;
- DEBUG ((EFI_D_INFO, "CalculateBestUdmaMode: DeviceUDmaMode = %x\n", DeviceUDmaMode));
- DeviceUDmaMode &= 0x3f;
- TempMode = 0; // initialize it to UDMA-0
-
- while ((DeviceUDmaMode >>= 1) != 0) {
- TempMode++;
- }
-
- //
- // Degrade the UDMA mode if the mode has been disqualified
- //
- if (DisUDmaMode != NULL) {
- if (*DisUDmaMode == 0) {
- *SelectedMode = 0;
- return EFI_UNSUPPORTED; // no mode below ATA_UDMA_MODE_0
- }
-
- if (TempMode >= *DisUDmaMode) {
- TempMode = (UINT16) (*DisUDmaMode - 1);
- }
- }
-
- //
- // Possible returned mode is between ATA_UDMA_MODE_0 and ATA_UDMA_MODE_5
- //
- *SelectedMode = TempMode;
-
- return EFI_SUCCESS;
-}
-
-/**
- The Entry Point of module. It follows the standard UEFI driver model.
-
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
- @param[in] SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The entry point is executed successfully.
- @retval other Some error occurs when executing this entry point.
-
-**/
-EFI_STATUS
-EFIAPI
-InitializeSataControllerDriver (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- //
- // Install driver model protocol(s).
- //
- Status = EfiLibInstallDriverBindingComponentName2 (
- ImageHandle,
- SystemTable,
- &gSataControllerDriverBinding,
- ImageHandle,
- &gSataControllerComponentName,
- &gSataControllerComponentName2
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
-
-/**
- Supported function of Driver Binding protocol for this driver.
- Test to see if this driver supports ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to test.
- @param RemainingDevicePath A pointer to the device path.
- it should be ignored by device driver.
-
- @retval EFI_SUCCESS This driver supports this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other This driver does not support this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PCI_TYPE00 PciData;
-
- //
- // Attempt to open PCI I/O Protocol
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- (VOID **) &PciIo,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Now further check the PCI header: Base Class (offset 0x0B) and
- // Sub Class (offset 0x0A). This controller should be an SATA controller
- //
- Status = PciIo->Pci.Read (
- PciIo,
- EfiPciIoWidthUint8,
- PCI_CLASSCODE_OFFSET,
- sizeof (PciData.Hdr.ClassCode),
- PciData.Hdr.ClassCode
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
- return EFI_SUCCESS;
- }
-
- return EFI_UNSUPPORTED;
-}
-
-/**
- This routine is called right after the .Supported() called and
- Start this driver on ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to bind driver to.
- @param RemainingDevicePath A pointer to the device path.
- it should be ignored by device driver.
-
- @retval EFI_SUCCESS This driver is added to this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other Some error occurs when binding this driver to this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PCI_TYPE00 PciData;
- EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
- UINT32 Data32;
- UINTN ChannelDeviceCount;
-
- DEBUG ((EFI_D_INFO, "SataControllerStart START\n"));
-
- SataPrivateData = NULL;
-
- //
- // Now test and open PCI I/O Protocol
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- (VOID **) &PciIo,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "SataControllerStart error return status = %r\n", Status));
- return Status;
- }
-
- //
- // Allocate Sata Private Data structure
- //
- SataPrivateData = AllocateZeroPool (sizeof (EFI_SATA_CONTROLLER_PRIVATE_DATA));
- if (SataPrivateData == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Done;
- }
-
- //
- // Initialize Sata Private Data
- //
- SataPrivateData->Signature = SATA_CONTROLLER_SIGNATURE;
- SataPrivateData->PciIo = PciIo;
- SataPrivateData->IdeInit.GetChannelInfo = IdeInitGetChannelInfo;
- SataPrivateData->IdeInit.NotifyPhase = IdeInitNotifyPhase;
- SataPrivateData->IdeInit.SubmitData = IdeInitSubmitData;
- SataPrivateData->IdeInit.DisqualifyMode = IdeInitDisqualifyMode;
- SataPrivateData->IdeInit.CalculateMode = IdeInitCalculateMode;
- SataPrivateData->IdeInit.SetTiming = IdeInitSetTiming;
- SataPrivateData->IdeInit.EnumAll = SATA_ENUMER_ALL;
-
- Status = PciIo->Pci.Read (
- PciIo,
- EfiPciIoWidthUint8,
- PCI_CLASSCODE_OFFSET,
- sizeof (PciData.Hdr.ClassCode),
- PciData.Hdr.ClassCode
- );
- ASSERT_EFI_ERROR (Status);
-
- if (IS_PCI_IDE (&PciData)) {
- SataPrivateData->IdeInit.ChannelCount = IDE_MAX_CHANNEL;
- SataPrivateData->DeviceCount = IDE_MAX_DEVICES;
- } else if (IS_PCI_SATADPA (&PciData)) {
- //
- // Read Host Capability Register(CAP) to get Number of Ports(NPS) and Supports Port Multiplier(SPM)
- // NPS is 0's based value indicating the maximum number of ports supported by the HBA silicon.
- // A maximum of 32 ports can be supported. A value of '0h', indicating one port, is the minimum requirement.
- //
- Data32 = AhciReadReg (PciIo, R_AHCI_CAP);
- SataPrivateData->IdeInit.ChannelCount = (UINT8) ((Data32 & B_AHCI_CAP_NPS) + 1);
- SataPrivateData->DeviceCount = AHCI_MAX_DEVICES;
- if ((Data32 & B_AHCI_CAP_SPM) == B_AHCI_CAP_SPM) {
- SataPrivateData->DeviceCount = AHCI_MULTI_MAX_DEVICES;
- }
- }
-
- ChannelDeviceCount = (UINTN) (SataPrivateData->IdeInit.ChannelCount) * (UINTN) (SataPrivateData->DeviceCount);
- SataPrivateData->DisqulifiedModes = AllocateZeroPool ((sizeof (EFI_ATA_COLLECTIVE_MODE)) * ChannelDeviceCount);
- if (SataPrivateData->DisqulifiedModes == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Done;
- }
-
- SataPrivateData->IdentifyData = AllocateZeroPool ((sizeof (EFI_IDENTIFY_DATA)) * ChannelDeviceCount);
- if (SataPrivateData->IdentifyData == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Done;
- }
-
- SataPrivateData->IdentifyValid = AllocateZeroPool ((sizeof (BOOLEAN)) * ChannelDeviceCount);
- if (SataPrivateData->IdentifyValid == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Done;
- }
-
- //
- // Install IDE Controller Init Protocol to this instance
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Controller,
- &gEfiIdeControllerInitProtocolGuid,
- &(SataPrivateData->IdeInit),
- NULL
- );
-
-Done:
- if (EFI_ERROR (Status)) {
-
- gBS->CloseProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
- if (SataPrivateData != NULL) {
- if (SataPrivateData->DisqulifiedModes != NULL) {
- FreePool (SataPrivateData->DisqulifiedModes);
- }
- if (SataPrivateData->IdentifyData != NULL) {
- FreePool (SataPrivateData->IdentifyData);
- }
- if (SataPrivateData->IdentifyValid != NULL) {
- FreePool (SataPrivateData->IdentifyValid);
- }
- FreePool (SataPrivateData);
- }
- }
-
- DEBUG ((EFI_D_INFO, "SataControllerStart END status = %r\n", Status));
-
- return Status;
-}
-
-/**
- Stop this driver on ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on.
- @param NumberOfChildren Not used.
- @param ChildHandleBuffer Not used.
-
- @retval EFI_SUCCESS This driver is removed from this device.
- @retval other Some error occurs when removing this driver from this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-{
- EFI_STATUS Status;
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
- EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
-
- //
- // Open the produced protocol
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- (VOID **) &IdeInit,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (IdeInit);
- ASSERT (SataPrivateData != NULL);
-
- //
- // Uninstall the IDE Controller Init Protocol from this instance
- //
- Status = gBS->UninstallMultipleProtocolInterfaces (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- &(SataPrivateData->IdeInit),
- NULL
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (SataPrivateData != NULL) {
- if (SataPrivateData->DisqulifiedModes != NULL) {
- FreePool (SataPrivateData->DisqulifiedModes);
- }
- if (SataPrivateData->IdentifyData != NULL) {
- FreePool (SataPrivateData->IdentifyData);
- }
- if (SataPrivateData->IdentifyValid != NULL) {
- FreePool (SataPrivateData->IdentifyValid);
- }
- FreePool (SataPrivateData);
- }
-
- //
- // Close protocols opened by Sata Controller driver
- //
- return gBS->CloseProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-}
-
-//
-// Interface functions of IDE_CONTROLLER_INIT protocol
-//
-/**
- Returns the information about the specified IDE channel.
-
- This function can be used to obtain information about a particular IDE channel.
- The driver entity uses this information during the enumeration process.
-
- If Enabled is set to FALSE, the driver entity will not scan the channel. Note
- that it will not prevent an operating system driver from scanning the channel.
-
- For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
- controllers, this value will always be 1. SATA configurations can contain SATA
- port multipliers. SATA port multipliers behave like SATA bridges and can support
- up to 16 devices on the other side. If a SATA port out of the IDE controller
- is connected to a port multiplier, MaxDevices will be set to the number of SATA
- devices that the port multiplier supports. Because today's port multipliers
- support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
- bus driver is required to scan for the presence of port multipliers behind an SATA
- controller and enumerate up to MaxDevices number of devices behind the port
- multiplier.
-
- In this context, the devices behind a port multiplier constitute a channel.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[out] Enabled TRUE if this channel is enabled. Disabled channels
- are not scanned to see if any devices are present.
- @param[out] MaxDevices The maximum number of IDE devices that the bus driver
- can expect on this channel. For the ATA/ATAPI
- specification, version 6, this number will either be
- one or two. For Serial ATA (SATA) configurations with a
- port multiplier, this number can be as large as fifteen.
-
- @retval EFI_SUCCESS Information was returned without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitGetChannelInfo (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- OUT BOOLEAN *Enabled,
- OUT UINT8 *MaxDevices
- )
-{
- EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
- SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
- ASSERT (SataPrivateData != NULL);
-
- if (Channel < This->ChannelCount) {
- *Enabled = TRUE;
- *MaxDevices = SataPrivateData->DeviceCount;
- return EFI_SUCCESS;
- }
-
- *Enabled = FALSE;
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- The notifications from the driver entity that it is about to enter a certain
- phase of the IDE channel enumeration process.
-
- This function can be used to notify the IDE controller driver to perform
- specific actions, including any chipset-specific initialization, so that the
- chipset is ready to enter the next phase. Seven notification points are defined
- at this time.
-
- More synchronization points may be added as required in the future.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Phase The phase during enumeration.
- @param[in] Channel Zero-based channel number.
-
- @retval EFI_SUCCESS The notification was accepted without any errors.
- @retval EFI_UNSUPPORTED Phase is not supported.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_NOT_READY This phase cannot be entered at this time; for
- example, an attempt was made to enter a Phase
- without having entered one or more previous
- Phase.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitNotifyPhase (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,
- IN UINT8 Channel
- )
-{
- return EFI_SUCCESS;
-}
-
-/**
- Submits the device information to the IDE controller driver.
-
- This function is used by the driver entity to pass detailed information about
- a particular device to the IDE controller driver. The driver entity obtains
- this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
- is the pointer to the response data buffer. The IdentifyData buffer is owned
- by the driver entity, and the IDE controller driver must make a local copy
- of the entire buffer or parts of the buffer as needed. The original IdentifyData
- buffer pointer may not be valid when
-
- - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
- - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
-
- The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
- compute the optimum mode for the device. These fields are not limited to the
- timing information. For example, an implementation of the IDE controller driver
- may examine the vendor and type/mode field to match known bad drives.
-
- The driver entity may submit drive information in any order, as long as it
- submits information for all the devices belonging to the enumeration group
- before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
- in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- should be called with IdentifyData set to NULL. The IDE controller driver may
- not have any other mechanism to know whether a device is present or not. Therefore,
- setting IdentifyData to NULL does not constitute an error condition.
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
- given (Channel, Device) pair.
-
- @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[in] Device Zero-based device number on the Channel.
- @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.
-
- @retval EFI_SUCCESS The information was accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitSubmitData (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_IDENTIFY_DATA *IdentifyData
- )
-{
- EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
- SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
- ASSERT (SataPrivateData != NULL);
-
- if ((Channel >= This->ChannelCount) || (Device >= SataPrivateData->DeviceCount)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Make a local copy of device's IdentifyData and mark the valid flag
- //
- if (IdentifyData != NULL) {
- CopyMem (
- &(SataPrivateData->IdentifyData[Channel * Device]),
- IdentifyData,
- sizeof (EFI_IDENTIFY_DATA)
- );
-
- SataPrivateData->IdentifyValid[Channel * Device] = TRUE;
- } else {
- SataPrivateData->IdentifyValid[Channel * Device] = FALSE;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Disqualifies specific modes for an IDE device.
-
- This function allows the driver entity or other drivers (such as platform
- drivers) to reject certain timing modes and request the IDE controller driver
- to recalculate modes. This function allows the driver entity and the IDE
- controller driver to negotiate the timings on a per-device basis. This function
- is useful in the case of drives that lie about their capabilities. An example
- is when the IDE device fails to accept the timing modes that are calculated
- by the IDE controller driver based on the response to the Identify Drive command.
-
- If the driver entity does not want to limit the ATA timing modes and leave that
- decision to the IDE controller driver, it can either not call this function for
- the given device or call this function and set the Valid flag to FALSE for all
- modes that are listed in EFI_ATA_COLLECTIVE_MODE.
-
- The driver entity may disqualify modes for a device in any order and any number
- of times.
-
- This function can be called multiple times to invalidate multiple modes of the
- same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
- specification for more information on PIO modes.
-
- For Serial ATA (SATA) controllers, this member function can be used to disqualify
- a higher transfer rate mode on a given channel. For example, a platform driver
- may inform the IDE controller driver to not use second-generation (Gen2) speeds
- for a certain SATA drive.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel The zero-based channel number.
- @param[in] Device The zero-based device number on the Channel.
- @param[in] BadModes The modes that the device does not support and that
- should be disqualified.
-
- @retval EFI_SUCCESS The modes were accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_INVALID_PARAMETER IdentifyData is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitDisqualifyMode (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_COLLECTIVE_MODE *BadModes
- )
-{
- EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
- SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
- ASSERT (SataPrivateData != NULL);
-
- if ((Channel >= This->ChannelCount) || (BadModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Record the disqualified modes per channel per device. From ATA/ATAPI spec,
- // if a mode is not supported, the modes higher than it is also not supported.
- //
- CopyMem (
- &(SataPrivateData->DisqulifiedModes[Channel * Device]),
- BadModes,
- sizeof (EFI_ATA_COLLECTIVE_MODE)
- );
-
- return EFI_SUCCESS;
-}
-
-/**
- Returns the information about the optimum modes for the specified IDE device.
-
- This function is used by the driver entity to obtain the optimum ATA modes for
- a specific device. The IDE controller driver takes into account the following
- while calculating the mode:
- - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
-
- The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- for all the devices that belong to an enumeration group before calling
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
-
- The IDE controller driver will use controller- and possibly platform-specific
- algorithms to arrive at SupportedModes. The IDE controller may base its
- decision on user preferences and other considerations as well. This function
- may be called multiple times because the driver entity may renegotiate the mode
- with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
-
- The driver entity may collect timing information for various devices in any
- order. The driver entity is responsible for making sure that all the dependencies
- are satisfied. For example, the SupportedModes information for device A that
- was previously returned may become stale after a call to
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
-
- The buffer SupportedModes is allocated by the callee because the caller does
- not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
- is defined in a way that allows for future extensibility and can be of variable
- length. This memory pool should be deallocated by the caller when it is no
- longer necessary.
-
- The IDE controller driver for a Serial ATA (SATA) controller can use this
- member function to force a lower speed (first-generation [Gen1] speeds on a
- second-generation [Gen2]-capable hardware). The IDE controller driver can
- also allow the driver entity to stay with the speed that has been negotiated
- by the physical layer.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel A zero-based channel number.
- @param[in] Device A zero-based device number on the Channel.
- @param[out] SupportedModes The optimum modes for the device.
-
- @retval EFI_SUCCESS SupportedModes was returned.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_INVALID_PARAMETER SupportedModes is NULL.
- @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
- data. This error may happen if
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
- were not called for at least one drive in the
- same enumeration group.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitCalculateMode (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes
- )
-{
- EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
- EFI_IDENTIFY_DATA *IdentifyData;
- BOOLEAN IdentifyValid;
- EFI_ATA_COLLECTIVE_MODE *DisqulifiedModes;
- UINT16 SelectedMode;
- EFI_STATUS Status;
-
- SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
- ASSERT (SataPrivateData != NULL);
-
- if ((Channel >= This->ChannelCount) || (SupportedModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {
- return EFI_INVALID_PARAMETER;
- }
-
- *SupportedModes = AllocateZeroPool (sizeof (EFI_ATA_COLLECTIVE_MODE));
- if (*SupportedModes == NULL) {
- ASSERT (*SupportedModes != NULL);
- return EFI_OUT_OF_RESOURCES;
- }
-
- IdentifyData = &(SataPrivateData->IdentifyData[Channel * Device]);
- IdentifyValid = SataPrivateData->IdentifyValid[Channel * Device];
- DisqulifiedModes = &(SataPrivateData->DisqulifiedModes[Channel * Device]);
-
- //
- // Make sure we've got the valid identify data of the device from SubmitData()
- //
- if (!IdentifyValid) {
- FreePool (*SupportedModes);
- return EFI_NOT_READY;
- }
-
- Status = CalculateBestPioMode (
- IdentifyData,
- (DisqulifiedModes->PioMode.Valid ? ((UINT16 *) &(DisqulifiedModes->PioMode.Mode)) : NULL),
- &SelectedMode
- );
- if (!EFI_ERROR (Status)) {
- (*SupportedModes)->PioMode.Valid = TRUE;
- (*SupportedModes)->PioMode.Mode = SelectedMode;
-
- } else {
- (*SupportedModes)->PioMode.Valid = FALSE;
- }
- DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: PioMode = %x\n", (*SupportedModes)->PioMode.Mode));
-
- Status = CalculateBestUdmaMode (
- IdentifyData,
- (DisqulifiedModes->UdmaMode.Valid ? ((UINT16 *) &(DisqulifiedModes->UdmaMode.Mode)) : NULL),
- &SelectedMode
- );
-
- if (!EFI_ERROR (Status)) {
- (*SupportedModes)->UdmaMode.Valid = TRUE;
- (*SupportedModes)->UdmaMode.Mode = SelectedMode;
-
- } else {
- (*SupportedModes)->UdmaMode.Valid = FALSE;
- }
- DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: UdmaMode = %x\n", (*SupportedModes)->UdmaMode.Mode));
-
- //
- // The modes other than PIO and UDMA are not supported
- //
- return EFI_SUCCESS;
-}
-
-/**
- Commands the IDE controller driver to program the IDE controller hardware
- so that the specified device can operate at the specified mode.
-
- This function is used by the driver entity to instruct the IDE controller
- driver to program the IDE controller hardware to the specified modes. This
- function can be called only once for a particular device. For a Serial ATA
- (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
- specific programming may be required.
-
- @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[in] Device Zero-based device number on the Channel.
- @param[in] Modes The modes to set.
-
- @retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.
- @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.
- The driver entity should not use this device.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitSetTiming (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_COLLECTIVE_MODE *Modes
- )
-{
- return EFI_SUCCESS;
-}
diff --git a/DuetPkg/SataControllerDxe/SataController.h b/DuetPkg/SataControllerDxe/SataController.h
deleted file mode 100644
index d2a929f3b4..0000000000
--- a/DuetPkg/SataControllerDxe/SataController.h
+++ /dev/null
@@ -1,542 +0,0 @@
-/** @file
- Header file for Sata Controller driver.
-
- Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _SATA_CONTROLLER_H_
-#define _SATA_CONTROLLER_H_
-
-#include <Uefi.h>
-#include <Protocol/ComponentName.h>
-#include <Protocol/DriverBinding.h>
-#include <Protocol/PciIo.h>
-#include <Protocol/IdeControllerInit.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <IndustryStandard/Pci.h>
-
-//
-// Global Variables definitions
-//
-extern EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding;
-extern EFI_COMPONENT_NAME_PROTOCOL gSataControllerComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gSataControllerComponentName2;
-
-#define AHCI_BAR_INDEX 0x05
-#define R_AHCI_CAP 0x0
-#define B_AHCI_CAP_NPS (BIT4 | BIT3 | BIT2 | BIT1 | BIT0) // Number of Ports
-#define B_AHCI_CAP_SPM BIT17 // Supports Port Multiplier
-
-///
-/// AHCI each channel can have up to 1 device
-///
-#define AHCI_MAX_DEVICES 0x01
-
-///
-/// AHCI each channel can have 15 devices in the presence of a multiplier
-///
-#define AHCI_MULTI_MAX_DEVICES 0x0F
-
-///
-/// IDE supports 2 channel max
-///
-#define IDE_MAX_CHANNEL 0x02
-
-///
-/// IDE supports 2 devices max
-///
-#define IDE_MAX_DEVICES 0x02
-
-#define SATA_ENUMER_ALL FALSE
-
-//
-// Sata Controller driver private data structure
-//
-
-#define SATA_CONTROLLER_SIGNATURE SIGNATURE_32('S','A','T','A')
-
-typedef struct _EFI_SATA_CONTROLLER_PRIVATE_DATA {
- //
- // Standard signature used to identify Sata Controller private data
- //
- UINT32 Signature;
-
- //
- // Protocol instance of IDE_CONTROLLER_INIT produced by this driver
- //
- EFI_IDE_CONTROLLER_INIT_PROTOCOL IdeInit;
-
- //
- // Copy of protocol pointers used by this driver
- //
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- //
- // The number of devices that are supported by this channel
- //
- UINT8 DeviceCount;
-
- //
- // The highest disqulified mode for each attached device,
- // From ATA/ATAPI spec, if a mode is not supported,
- // the modes higher than it is also not supported
- //
- EFI_ATA_COLLECTIVE_MODE *DisqulifiedModes;
-
- //
- // A copy of EFI_IDENTIFY_DATA data for each attached SATA device and its flag
- //
- EFI_IDENTIFY_DATA *IdentifyData;
- BOOLEAN *IdentifyValid;
-} EFI_SATA_CONTROLLER_PRIVATE_DATA;
-
-#define SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS(a) CR(a, EFI_SATA_CONTROLLER_PRIVATE_DATA, IdeInit, SATA_CONTROLLER_SIGNATURE)
-
-//
-// Driver binding functions declaration
-//
-/**
- Supported function of Driver Binding protocol for this driver.
- Test to see if this driver supports ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to test.
- @param RemainingDevicePath A pointer to the device path. Should be ignored by
- device driver.
-
- @retval EFI_SUCCESS This driver supports this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other This driver does not support this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-;
-
-/**
- This routine is called right after the .Supported() called and
- Start this driver on ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to bind driver to.
- @param RemainingDevicePath A pointer to the device path. Should be ignored by
- device driver.
-
- @retval EFI_SUCCESS This driver is added to this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other Some error occurs when binding this driver to this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-;
-
-/**
- Stop this driver on ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on.
- @param NumberOfChildren Not used.
- @param ChildHandleBuffer Not used.
-
- @retval EFI_SUCCESS This driver is removed from this device.
- @retval other Some error occurs when removing this driver from this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-;
-
-//
-// IDE controller init functions declaration
-//
-/**
- Returns the information about the specified IDE channel.
-
- This function can be used to obtain information about a particular IDE channel.
- The driver entity uses this information during the enumeration process.
-
- If Enabled is set to FALSE, the driver entity will not scan the channel. Note
- that it will not prevent an operating system driver from scanning the channel.
-
- For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
- controllers, this value will always be 1. SATA configurations can contain SATA
- port multipliers. SATA port multipliers behave like SATA bridges and can support
- up to 16 devices on the other side. If a SATA port out of the IDE controller
- is connected to a port multiplier, MaxDevices will be set to the number of SATA
- devices that the port multiplier supports. Because today's port multipliers
- support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
- bus driver is required to scan for the presence of port multipliers behind an SATA
- controller and enumerate up to MaxDevices number of devices behind the port
- multiplier.
-
- In this context, the devices behind a port multiplier constitute a channel.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[out] Enabled TRUE if this channel is enabled. Disabled channels
- are not scanned to see if any devices are present.
- @param[out] MaxDevices The maximum number of IDE devices that the bus driver
- can expect on this channel. For the ATA/ATAPI
- specification, version 6, this number will either be
- one or two. For Serial ATA (SATA) configurations with a
- port multiplier, this number can be as large as fifteen.
-
- @retval EFI_SUCCESS Information was returned without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitGetChannelInfo (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- OUT BOOLEAN *Enabled,
- OUT UINT8 *MaxDevices
- )
-;
-
-/**
- The notifications from the driver entity that it is about to enter a certain
- phase of the IDE channel enumeration process.
-
- This function can be used to notify the IDE controller driver to perform
- specific actions, including any chipset-specific initialization, so that the
- chipset is ready to enter the next phase. Seven notification points are defined
- at this time.
-
- More synchronization points may be added as required in the future.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Phase The phase during enumeration.
- @param[in] Channel Zero-based channel number.
-
- @retval EFI_SUCCESS The notification was accepted without any errors.
- @retval EFI_UNSUPPORTED Phase is not supported.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_NOT_READY This phase cannot be entered at this time; for
- example, an attempt was made to enter a Phase
- without having entered one or more previous
- Phase.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitNotifyPhase (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,
- IN UINT8 Channel
- )
-;
-
-/**
- Submits the device information to the IDE controller driver.
-
- This function is used by the driver entity to pass detailed information about
- a particular device to the IDE controller driver. The driver entity obtains
- this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
- is the pointer to the response data buffer. The IdentifyData buffer is owned
- by the driver entity, and the IDE controller driver must make a local copy
- of the entire buffer or parts of the buffer as needed. The original IdentifyData
- buffer pointer may not be valid when
-
- - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
- - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
-
- The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
- compute the optimum mode for the device. These fields are not limited to the
- timing information. For example, an implementation of the IDE controller driver
- may examine the vendor and type/mode field to match known bad drives.
-
- The driver entity may submit drive information in any order, as long as it
- submits information for all the devices belonging to the enumeration group
- before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
- in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- should be called with IdentifyData set to NULL. The IDE controller driver may
- not have any other mechanism to know whether a device is present or not. Therefore,
- setting IdentifyData to NULL does not constitute an error condition.
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
- given (Channel, Device) pair.
-
- @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[in] Device Zero-based device number on the Channel.
- @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.
-
- @retval EFI_SUCCESS The information was accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitSubmitData (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_IDENTIFY_DATA *IdentifyData
- )
-;
-
-/**
- Disqualifies specific modes for an IDE device.
-
- This function allows the driver entity or other drivers (such as platform
- drivers) to reject certain timing modes and request the IDE controller driver
- to recalculate modes. This function allows the driver entity and the IDE
- controller driver to negotiate the timings on a per-device basis. This function
- is useful in the case of drives that lie about their capabilities. An example
- is when the IDE device fails to accept the timing modes that are calculated
- by the IDE controller driver based on the response to the Identify Drive command.
-
- If the driver entity does not want to limit the ATA timing modes and leave that
- decision to the IDE controller driver, it can either not call this function for
- the given device or call this function and set the Valid flag to FALSE for all
- modes that are listed in EFI_ATA_COLLECTIVE_MODE.
-
- The driver entity may disqualify modes for a device in any order and any number
- of times.
-
- This function can be called multiple times to invalidate multiple modes of the
- same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
- specification for more information on PIO modes.
-
- For Serial ATA (SATA) controllers, this member function can be used to disqualify
- a higher transfer rate mode on a given channel. For example, a platform driver
- may inform the IDE controller driver to not use second-generation (Gen2) speeds
- for a certain SATA drive.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel The zero-based channel number.
- @param[in] Device The zero-based device number on the Channel.
- @param[in] BadModes The modes that the device does not support and that
- should be disqualified.
-
- @retval EFI_SUCCESS The modes were accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_INVALID_PARAMETER IdentifyData is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitDisqualifyMode (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_COLLECTIVE_MODE *BadModes
- )
-;
-
-/**
- Returns the information about the optimum modes for the specified IDE device.
-
- This function is used by the driver entity to obtain the optimum ATA modes for
- a specific device. The IDE controller driver takes into account the following
- while calculating the mode:
- - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
-
- The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- for all the devices that belong to an enumeration group before calling
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
-
- The IDE controller driver will use controller- and possibly platform-specific
- algorithms to arrive at SupportedModes. The IDE controller may base its
- decision on user preferences and other considerations as well. This function
- may be called multiple times because the driver entity may renegotiate the mode
- with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
-
- The driver entity may collect timing information for various devices in any
- order. The driver entity is responsible for making sure that all the dependencies
- are satisfied. For example, the SupportedModes information for device A that
- was previously returned may become stale after a call to
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
-
- The buffer SupportedModes is allocated by the callee because the caller does
- not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
- is defined in a way that allows for future extensibility and can be of variable
- length. This memory pool should be deallocated by the caller when it is no
- longer necessary.
-
- The IDE controller driver for a Serial ATA (SATA) controller can use this
- member function to force a lower speed (first-generation [Gen1] speeds on a
- second-generation [Gen2]-capable hardware). The IDE controller driver can
- also allow the driver entity to stay with the speed that has been negotiated
- by the physical layer.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel A zero-based channel number.
- @param[in] Device A zero-based device number on the Channel.
- @param[out] SupportedModes The optimum modes for the device.
-
- @retval EFI_SUCCESS SupportedModes was returned.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_INVALID_PARAMETER SupportedModes is NULL.
- @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
- data. This error may happen if
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
- were not called for at least one drive in the
- same enumeration group.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitCalculateMode (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes
- )
-;
-
-/**
- Commands the IDE controller driver to program the IDE controller hardware
- so that the specified device can operate at the specified mode.
-
- This function is used by the driver entity to instruct the IDE controller
- driver to program the IDE controller hardware to the specified modes. This
- function can be called only once for a particular device. For a Serial ATA
- (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
- specific programming may be required.
-
- @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[in] Device Zero-based device number on the Channel.
- @param[in] Modes The modes to set.
-
- @retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.
- @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.
- The driver entity should not use this device.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitSetTiming (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_COLLECTIVE_MODE *Modes
- )
-;
-
-//
-// Forward reference declaration
-//
-/**
- Retrieves a Unicode string that is the user readable name of the UEFI Driver.
-
- @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- @param Language A pointer to a three character ISO 639-2 language identifier.
- This is the language of the driver name that that the caller
- is requesting, and it must match one of the languages specified
- in SupportedLanguages. The number of languages supported by a
- driver is up to the driver writer.
- @param DriverName A pointer to the Unicode string to return. This Unicode string
- is the name of the driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by This
- and the language specified by Language was returned
- in DriverName.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This does not support the
- language specified by Language.
-**/
-EFI_STATUS
-EFIAPI
-SataControllerComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-;
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by an UEFI Driver.
-
- @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- @param ControllerHandle The handle of a controller that the driver specified by
- This is managing. This handle specifies the controller
- whose name is to be returned.
- @param OPTIONAL ChildHandle The handle of the child controller to retrieve the name
- of. This is an optional parameter that may be NULL. It
- will be NULL for device drivers. It will also be NULL
- for a bus drivers that wish to retrieve the name of the
- bus controller. It will not be NULL for a bus driver
- that wishes to retrieve the name of a child controller.
- @param Language A pointer to a three character ISO 639-2 language
- identifier. This is the language of the controller name
- that that the caller is requesting, and it must match one
- of the languages specified in SupportedLanguages. The
- number of languages supported by a driver is up to the
- driver writer.
- @param ControllerName A pointer to the Unicode string to return. This Unicode
- string is the name of the controller specified by
- ControllerHandle and ChildHandle in the language
- specified by Language from the point of view of the
- driver specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in the
- language specified by Language for the driver
- specified by This was returned in DriverName.
- @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
- @retval EFI_UNSUPPORTED The driver specified by This does not support the
- language specified by Language.
-**/
-EFI_STATUS
-EFIAPI
-SataControllerComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-;
-
-#endif
diff --git a/DuetPkg/SataControllerDxe/SataControllerDxe.inf b/DuetPkg/SataControllerDxe/SataControllerDxe.inf
deleted file mode 100644
index b3b37ddd0e..0000000000
--- a/DuetPkg/SataControllerDxe/SataControllerDxe.inf
+++ /dev/null
@@ -1,49 +0,0 @@
-## @file
-#
-# Component description file for the Sata Controller driver.
-#
-# Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = SataController
- FILE_GUID = 8F4CD826-A5A0-4e93-9522-CFB0AB72926C
- MODULE_TYPE = UEFI_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = InitializeSataControllerDriver
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources]
- ComponentName.c
- SataController.c
- SataController.h
-
-[Packages]
- MdePkg/MdePkg.dec
-
-[LibraryClasses]
- UefiDriverEntryPoint
- DebugLib
- UefiLib
- BaseLib
- BaseMemoryLib
- MemoryAllocationLib
- UefiBootServicesTableLib
-
-[Protocols]
- gEfiPciIoProtocolGuid
- gEfiIdeControllerInitProtocolGuid