Remove the EDK build infrastructure, which was the temp solution when EDKII build tool did not support build EDK module.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4640 6f19259b-4bc3-4df7-8a09-765794883524

15 files changed, 0 insertions, 2037 deletions

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env
deleted file mode 100644
index 51ce1dd6a5..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env
+++ /dev/null
@@ -1,33 +0,0 @@
-#/*++

-#   

-#  Copyright (c) 2006 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#

-#    Config.env

-#   

-#  Abstract:

-#   

-#    This file is used to define platform build configuration.

-#    It gets included by PlatformTools.env.

-#   

-#--*/

-

-BUILD_TARGET_DIRECTORY         = Build

-EFI_DEBUG                      = NO

-EFI_DEBUG_CLEAR_MEMORY         = NO

-EFI_PEI_PERFORMANCE            = NO

-EFI_DXE_PERFORMANCE            = NO

-EFI_SYMBOLIC_DEBUG             = NO

-EFI_GENERATE_INTERMEDIATE_FILE = NO

-EFI_PEI_REPORT_STATUS_CODE     = NO

-UEFI_MODE                      = YES

-PI_MODE                        = YES

-USE_VC8                        = NO

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc
deleted file mode 100644
index 303e7a6284..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc
+++ /dev/null
@@ -1,102 +0,0 @@
-#/*++

-#

-# Copyright (c) 2004 - 2007, Intel Corporation                                                         

-# All rights reserved. This program and the accompanying materials                          

-# are licensed and made available under the terms and conditions of the BSD License         

-# which accompanies this distribution.  The full text of the license may be found at        

-# http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                           

-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-# 

-#  Module Name:

-#

-#    Ia32.dsc

-#

-#  Abstract:

-#

-#    This is the build description file containing the platform 

-#    build definitions.

-#

-#

-#  Notes:

-#    

-#    The info in this file is broken down into sections. The start of a section

-#    is designated by a "[" in the first column. So the [=====] separater ends

-#    a section.

-#    

-#--*/

-

-

-[=============================================================================]

-#

-# This section gets processed first by the utility. Define any

-# macros that you may use elsewhere in this description file. This is the

-# mechanism by which you can pass parameters and defines to the makefiles

-# generated for each component. You can define it here, and then make an

-# assignment in the [makefile.common] section. For example, if here you

-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in

-# the [makefile.common] section and it becomes MY_VAR = my_var_value in

-# the output makefiles for each component.

-#

-[Defines]

-PLATFORM                  = $(PROJECT_NAME)

-

-[=============================================================================]

-#

-# Include other common build descriptions

-#

-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"

-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"

-

-[=============================================================================]

-#

-# These control the generation of the FV files

-#

-[=============================================================================]

-[Fv.Fv.Attributes]

-

-[Fv.Fv.options]

-

-[Build.Fv.Fv]

-

-[=============================================================================]

-#

-# These are the libraries that will be built by the master makefile

-#

-[=============================================================================]

-[Libraries]

-DEFINE EDK_PREFIX=

-

-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"

-

-#

-# EdkII Glue Library

-#

-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"

-

-[=============================================================================]

-#

-# These are platform specific libraries that must be built prior to building

-# certain drivers that depend upon them.

-#

-[=============================================================================]

-[Libraries.Platform]

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf

-

-#Other\Maintained\Application\Shell\Library\EfiShellLib.inf

-

-[=============================================================================]

-#

-# These are the components that will be built by the master makefile

-#

-[=============================================================================]

-[Components]

-DEFINE PACKAGE=Default

-

-#Add EDK INF file here:

-#Other\Maintained\Application\Shell\ShellFull.inf

-

-[=============================================================================]

-

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile
deleted file mode 100644
index 8ad8646dc4..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile
+++ /dev/null
@@ -1,231 +0,0 @@
-#/*++

-#

-#  Copyright (c) 2004 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#  

-#    Makefile

-#  

-#  Abstract:

-#   

-#    This makefile is used to build the NT emulation.

-#   

-#--*/

-

-#

-# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined

-#

-!IFNDEF EDK_SOURCE

-!ERROR EDK_SOURCE environmental variable not set 

-!ENDIF

-

-!IFNDEF EDK_TOOLS_PATH

-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used

-!ENDIF

-

-#

-# Set the processor type

-#

-PROCESSOR = IA32

-

-#

-# Define a toolchain so we can pick up the basic defines from

-# the EFI tool setup file.

-#

-TOOLCHAIN = TOOLCHAIN_MSVC

-

-!INCLUDE PlatformTools.env

-

-#

-# Default target

-#

-all : customer

-

-#

-# Target to build customer config

-#

-customer : tempstamp_file build_tools makefiles builds

-

-#

-# Target to build everything quickly

-#

-fast : build_tools fast_makefiles builds

-

-#

-# Create a file to store the date and time, and used by SetStamp.exe

-#

-tempstamp_file:

-!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP)

-  @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt

-!ELSEIF EXIST(GenStamp.txt)

-  - @del GenStamp.txt

-!ENDIF

-

-#

-# Make all the EFI build tools by calling the makefile

-#

-build_tools :

-  -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)

-  -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)

-  $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)

-  $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt  

-

-#

-# Run ProcessDsc on our main description files to generate the

-# makefiles and package files. Specify -v option for more verbose output.

-# Specify "-xref filename" to generate a cross-reference file of 

-# basename-to-fileguid that can be used by VolInfo.

-#

-makefiles : 

-  $(PROCESSDSC)                                    \

-    -d EFI_SOURCE=$(EDK_SOURCE)                    \

-    -d EDK_SOURCE=$(EDK_SOURCE)                    \

-    -d PROCESSOR=$(PROCESSOR)                      \

-    -d PROJECT_NAME=$(PROJECT_NAME)                \

-    -d COMPRESS_METHOD=$(COMPRESS_METHOD)          \

-    -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT)             \

-    -d SHELL_INF=$(SHELL_INF)                      \

-    -d UEFI_PREFIX=$(UEFI_PREFIX)                  \

-    -d PI_PREFIX=$(PI_PREFIX)                      \

-    -d CAPSULE_INF=$(CAPSULE_INF)                  \

-    -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF)  \

-    -d DEVPATH_INF=$(DEVPATH_INF)                  \

-    -d GRAPHICS_INF=$(GRAPHICS_INF)                \

-    -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt        \

-    -xref FV\Guid.xref                             \

-    $(PROJECT_NAME).dsc

-    

-#

-# Build faster by not building components with FV=NULL. Override in the

-# DSC file by adding SKIP_FV_NULL=0 on the component lines you want built

-# but still have FV=NULL. For example:

-#

-# Dxe\Drivers\MyDriver\MyDriver.inf  FV=NULL  SKIP_FV_NULL=0

-#

-fast_makefiles : 

-  $(PROCESSDSC)                                    \

-    -d EFI_SOURCE=$(EDK_SOURCE)                    \

-    -d EDK_SOURCE=$(EDK_SOURCE)                    \

-    -d PROCESSOR=$(PROCESSOR)                      \

-    -d PROJECT_NAME=$(PROJECT_NAME)                \

-    -d COMPRESS_METHOD=$(COMPRESS_METHOD)          \

-    -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT)             \

-    -d SHELL_INF=$(SHELL_INF)                      \

-    -d UEFI_PREFIX=$(UEFI_PREFIX)                  \

-    -d PI_PREFIX=$(PI_PREFIX)                      \

-    -d CAPSULE_INF=$(CAPSULE_INF)                  \

-    -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF)  \

-    -d DEVPATH_INF=$(DEVPATH_INF)                  \

-    -d GRAPHICS_INF=$(GRAPHICS_INF)                \

-    -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt        \

-    -xref FV\Guid.xref                             \

-    -d SKIP_FV_NULL=1                              \

-    $(PROJECT_NAME).dsc

-

-#

-# Create the guid-to-basename cross reference file of protocols

-# used by volinfo for decoding dependency expressions.

-#

-protocols.xref : 

-  -@if not exist fv mkdir FV

-  cd $(EDK_SOURCE)

-  $(GUIDCHK) -g -u $(BUILD_TARGET_DIRECTORY) -e inf -x > $(BUILD_DIR)\Fv\protocols.xref

-  cd $(BUILD_DIR)

-

-#

-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc

-# creates the makefile.out that calls all the component makefiles.

-#

-builds :

-  $(MAKE) -f makefile.out

-

-#

-# Useful targets

-#

-

-#

-# Define a pseudo-target that skips over compiling the build tools and

-# also skips creation of the makefiles for the components. The user

-# has to be aware that any changes to INF files renders this target

-# invalid.

-#

-quick : builds

-

-#

-# Define a pseudo-target to start building with the libraries or with the 

-# components.

-#

-libraries :

-  $(MAKE) -f makefile.out libraries

-

-components :

-  $(MAKE) -f makefile.out components

-

-#

-# Make a pseudo-target to simplify running of the NT emulation. 

-#

-!IF "$(EFI_WIN_NT_FILE_SYSTEM)" == ""

-EFI_WIN_NT_FILE_SYSTEM = $(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps

-!ELSE

-EFI_WIN_NT_FILE_SYSTEM = $(EFI_WIN_NT_FILE_SYSTEM)!$(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps

-!ENDIF

-

-#

-# Make browse info file

-#

-bsc:

-  - dir /s /b *.sbr > $(PROCESSOR)\temp.rm

-  $(BSCMAKE) /n /o $(PROCESSOR)\$(PROJECT_NAME).bsc "@$(PROCESSOR)\temp.rm"

-

-#

-# Create a target to clean up all build directories

-#

-clean :

-  - @if exist vc??.* del vc??.* > NUL

-  - @if exist *.bak del *.bak > NUL

-  - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL

-  - @if exist ipf rd /s /q ipf > NUL

-  - @if exist ebc rd /s /q ebc > NUL

-  - @if exist fv rd /s /q fv > NUL

-  - @if exist Tools rd /s /q Tools > NUL

-  - @if exist makefile.out del makefile.out > NUL

-  - @if exist module.* del module.* > NUL

-  - @echo All targets cleaned

-

-#

-# Clean up all build directories except for tools.

-#

-cleanbuilds :

-  - @if exist *.bak del *.bak > NUL

-  - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL

-  - @if exist ipf rd /s /q ipf > NUL

-  - @if exist ebc rd /s /q ebc > NUL

-  - @if exist fv rd /s /q fv > NUL

-  - @if exist makefile.out del makefile.out > NUL

-  - @if exist module.* del module.* > NUL

-  - @echo All modules cleaned

-

-#

-# Clean up only the tools

-#

-cleantools :

-  - @if exist vc??.* del vc??.* > NUL

-  - @if exist Tools rd /s /q Tools > NUL

-  - @echo All tools cleaned

-

-#

-# Rebuild target, clean and build all

-#

-rebuild : clean all

-

-#

-# cleanall target to clean all build directories.

-#

-cleanall : clean

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env
deleted file mode 100644
index 224783c39c..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env
+++ /dev/null
@@ -1,68 +0,0 @@
-#/*++

-#   

-#  Copyright (c) 2004 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#

-#    PlatformTools.env

-#   

-#  Abstract:

-#   

-#    This file is used to define platform specific environment variables.

-#    It gets included by every makefile.

-#   

-#--*/

-

-!INCLUDE Config.env

-

-#

-# Set the project name

-#

-PROJECT_NAME = Ia32

-

-#

-# Set the build directory

-#

-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)

-

-!IF "$(UEFI_MODE)" == "YES"

-GRAPHICS_INF = Sample\Bus\WinNtThunk\Gop\Dxe\WinNtGop.inf

-!ELSE

-GRAPHICS_INF = Sample\Bus\WinNtThunk\Uga\Dxe\WinNtUga.inf

-!ENDIF

-

-#

-# Define compiler names

-#

-!IFNDEF EDK_TOOLS_PATH

-EFI_ASL_LOCAL           = YES

-!ELSE 

-EFI_ASSEMBLER_NAME      = Masm611

-EFI_ASL_LOCAL           = NO

-!ENDIF

-

-#

-# These flags are specific to this platform.  If a flag is not specific to this 

-# platform the flag should be placed in the CommonTools.env file.

-# Processor architecture specific and global macros can be found in 

-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.

-#

-C_PROJ_FLAGS          = /O1 /D UNICODE /D NEW_PEI_HOBS

-ASM_PROJ_FLAGS        = /Cx /Zd /Fl$*.lst

-LINK_PROJ_FLAGS       =

-LIB_PROJ_FLAGS        =

-EBC_C_PROJ_FLAGS      =

-EBC_LINK_PROJ_FLAGS   =

-EBC_LIB_PROJ_FLAGS    =

-

-#

-# Include processor architecture specific and general Tiano build flags.

-#

-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat
deleted file mode 100644
index c224c2ee74..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat
+++ /dev/null
@@ -1,304 +0,0 @@
-@rem #/*++

-@rem #  

-@rem #  Copyright (c) 2007, Intel Corporation                                                         

-@rem #  All rights reserved. This program and the accompanying materials                          

-@rem #  are licensed and made available under the terms and conditions of the BSD License         

-@rem #  which accompanies this distribution.  The full text of the license may be found at        

-@rem #  http://opensource.org/licenses/bsd-license.php                                            

-@rem #                                                                                            

-@rem #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-@rem #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-@rem #  

-@rem #  Module Name:

-@rem #  

-@rem #    build.bat

-@rem #  

-@rem #  Abstract:

-@rem #    

-@rem #    This script provides single module build, clean and find function

-@rem #    based on module name.

-@rem #    

-@rem #    The auto-generated module.list file records all module names 

-@rem #    described in the current platform.dsc.

-@rem #    

-@rem #--*/ 

-

-@echo off

-

-setlocal

-@rem initilize local variable

-set FUNCTION=build

-set MODULE=

-set UPDATE=

-set VERBOSE=

-

-:parse

-if /I "%1"=="/c" (

-  set FUNCTION=clean

-  shift

-  goto parse

-)

-if /I "%1"=="clean" (

-  set FUNCTION=clean

-  shift

-  goto parse

-)

-if /I "%1"=="/r" (

-  set FUNCTION=rebuild

-  shift

-  goto parse

-)

-if /I "%1"=="/h" (

-  set FUNCTION=usage

-  shift

-  goto parse

-)

-if /I "%1"=="/?" (

-  set FUNCTION=usage

-  shift

-  goto parse

-)

-if /I "%1"=="/f" (

-  set FUNCTION=find

-  shift

-  goto parse

-)

-if /I "%1"=="/a" (

-  set UPDATE=TRUE

-  shift

-  goto parse

-)

-if /I "%1"=="/v" (

-  set VERBOSE=TRUE

-  shift

-  goto parse

-)

-if not "%1"=="" (

-  set MODULE=%1

-  shift

-  goto parse

-) else (

-  @rem no other paramters

-  if "%FUNCTION%"=="rebuild" goto build

-  goto %FUNCTION%

-)

-

-:build

-set StartTime=%time%

-@rem if no input, build all

-if "%MODULE%"=="" (

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile clean

-  )

-  nmake -nologo -f Makefile all

-  goto endtime

-)

-@rem then try to build special targets: all, fast, tools.

-if /I "%MODULE%"=="all" (

-  @rem build all modules and tools.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile cleanall

-  )

-  nmake -nologo -f Makefile all

-  goto endtime

-)

-if /I "%MODULE%"=="fast" (

-  @rem build fast target to skip FV=NULL modules.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile clean

-  )

-  nmake -nologo -f Makefile fast

-  goto endtime

-)

-if /I "%MODULE%"=="tools" (

-  @rem build all tools.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile cleantools

-  )

-  nmake -nologo -f Makefile build_tools

-  echo.

-  echo All tools are built.

-  goto endtime

-)

-@rem build single module, update build makefiles

-if "%FUNCTION%"=="rebuild" (

-  nmake -nologo -f module.mak %MODULE%Clean 2>NUL

-)

-nmake -nologo -f Makefile flashmap > NUL 2>&1

-nmake -nologo -f Makefile makefiles

-if errorlevel 1 goto builderror

-@rem check whether input module name is described in current dsc file. 

-findstr /I /C:" %MODULE% " module.list > NUL

-if errorlevel 1 (

-  echo.

-  echo.

-  findstr /I /C:"%MODULE%" module.list > NUL

-  if errorlevel 1 goto finderror

-  for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  echo.

-  echo Warning!!! Your specified module name can't be found. 

-  echo One of the above modules may be what you want to build.

-  goto end

-)

-@rem build this module

-nmake -nologo -f module.mak %MODULE%Build 

-echo.

-if "%FUNCTION%"=="rebuild" (

-  echo Module %MODULE% is rebuilt.

-) else (

-  echo Module %MODULE% is built.

-)

-:endtime

-@rem output build time.

-set EndTime=%time%

-echo.

-echo Start time %StartTime%

-echo End   time %EndTime%

-goto end

-

-:clean

-@rem if no input, default clean all build directories.

-if "%MODULE%"=="" (

-  nmake -nologo -f Makefile clean

-  goto end

-)

-@rem first try to clean special tasks: all, modules and tools

-if /I "%MODULE%"=="all" (

-  nmake -nologo -f Makefile cleanall

-  goto end

-)

-if /I "%MODULE%"=="modules" (

-  nmake -nologo -f Makefile cleanbuilds

-  goto end

-)

-if /I "%MODULE%"=="tools" (

-  nmake -nologo -f Makefile cleantools

-  goto end

-)

-@rem clean single module  

-@rem check whether input module name is in module.list file. 

-if not exist module.list (

-  echo Module list info doesn't exist.

-  echo Processing dsc file to generate module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-findstr /I /C:" %MODULE% " module.list > NUL

-if errorlevel 1 (

-  echo.

-  findstr /I /C:"%MODULE%" module.list > NUL

-  if errorlevel 1 goto finderror

-  for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  echo.

-  echo Warning!!! Your specified module name can't be found. 

-  echo One of the above modules may be what you want to clean. 

-  goto end

-)

-@rem clean this module 

-nmake -nologo -f module.mak %MODULE%Clean 2>NUL

-echo.

-echo Module %MODULE% is cleaned.

-goto end

-

-:find

-@rem find match module name by subname.

-if "%UPDATE%"=="TRUE" (

-  echo Processing dsc file to update module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-if not exist module.list (

-  echo Module list info doesn't exist.

-  echo Processing dsc file to generate module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-if "%MODULE%"=="" (

-  @rem display all

-  echo.

-  if "%VERBOSE%"=="TRUE" ( 

-    type module.list

-  ) else (

-    @rem only output module name without module.inf file name

-    for /F %%A in (module.list) do echo  %%A

-  )

-) else (

-  @rem display match module name

-  echo.

-  if "%VERBOSE%"=="TRUE" (

-    findstr /I /C:"%MODULE%" module.list

-    if errorlevel 1 goto notfind

-  ) else (

-    findstr /I /C:"%MODULE%" module.list > NUL

-    if errorlevel 1 goto notfind

-    for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  )

-)

-goto end

-

-:usage

-echo build or clean single module based on module name after tools are built.

-echo.

-echo build [/r] [/c] [/f] [/h] [modulename]

-echo.

-echo build [/r] [modulename]

-echo       build single module, such as build DxeMain.

-echo       If /r is specified, the target will be rebuit after cleaned first.

-echo       if no input modulename or modulename is all, then build all

-echo       Specail build targets: all, fast, tools.

-echo       These special targets may not exist in your tip main makefile.

-echo       build       - build all tools and modules

-echo       build all   - build all tools and modules

-echo       build fast  - build all without FV=NULL modules

-echo       build tools - build all tools.

-echo.

-echo build /c    [modulename]

-echo build clean [modulename]

-echo       remove the temp generated files for single module  

-echo       if no input modulename, then clean all

-echo       Specail clean targets: all, modules, tools.

-echo       These special targets may not exist in your tip main makefile.

-echo       build /c         - clean up all build directories

-echo       build /c all     - clean up all build directories and binary dirs.

-echo       build /c modules - clean up all build directories except for tools.

-echo       build /c tools   - clean up only tools directory.

-echo.

-echo build /f [/a] [/v] [subname]

-echo       find all matched modulename with the sub string of module name.

-echo       option /a re-processes dsc files to update module name list.

-echo       option /v outputs module name and module.inf file name both.

-echo.

-echo build /h

-echo build /?

-echo       display help information. 

-echo.

-goto end

-

-:notfind

-echo Warning!!! Your specified module name can't be found.

-echo Try to use /f /a options to update module name list.

-goto end

-

-:finderror

-echo Warning!!! Your specified module name can't be found.

-echo Try to use /f to find modules that you want to build.

-echo Or use /h to get the helpinfo of this script.

-goto end

-

-:builderror

-if exist error.log type error.log

-echo.

-if not exist Tools\ProcessDsc.exe (

-  echo.

-  echo Error!!! Build tools may not be ready. Try to build tools first.

-  echo.

-)

-del module.* > NUL 2>&1

-goto end

-

-:end

-if exist error.log del error.log

-echo on

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env
deleted file mode 100644
index d294b50c6d..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env
+++ /dev/null
@@ -1,31 +0,0 @@
-#/*++

-#   

-#  Copyright (c) 2006 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#

-#    Config.env

-#   

-#  Abstract:

-#   

-#    This file is used to define platform build configuration.

-#    It gets included by PlatformTools.env.

-#   

-#--*/

-

-BUILD_TARGET_DIRECTORY         = Build

-EFI_DEBUG                      = NO

-EFI_DEBUG_CLEAR_MEMORY         = NO

-EFI_SYMBOLIC_DEBUG             = NO

-EFI_GENERATE_INTERMEDIATE_FILE = NO

-UEFI_MODE                      = YES

-USE_VC8                        = NO

-USE_VC8_IPF                    = NO

-USE_NEWDDK                     = YES

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc
deleted file mode 100644
index d1574df403..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc
+++ /dev/null
@@ -1,102 +0,0 @@
-#/*++

-#

-# Copyright (c) 2004 - 2007, Intel Corporation                                                         

-# All rights reserved. This program and the accompanying materials                          

-# are licensed and made available under the terms and conditions of the BSD License         

-# which accompanies this distribution.  The full text of the license may be found at        

-# http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                           

-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-# 

-#  Module Name:

-#

-#    IPF.dsc

-#

-#  Abstract:

-#

-#    This is the build description file containing the platform 

-#    specific build definitions.

-#

-#

-#  Notes:

-#    

-#    The info in this file is broken down into sections. The start of a section

-#    is designated by a "[" in the first column. So the [=====] separater ends

-#    a section.

-#    

-#--*/

-

-

-[=============================================================================]

-#

-# This section gets processed first by the utility. Define any

-# macros that you may use elsewhere in this description file. This is the

-# mechanism by which you can pass parameters and defines to the makefiles

-# generated for each component. You can define it here, and then make an

-# assignment in the [makefile.common] section. For example, if here you

-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in

-# the [makefile.common] section and it becomes MY_VAR = my_var_value in

-# the output makefiles for each component.

-#

-[Defines]

-PLATFORM=$(PROJECT_NAME)

-

-

-[=============================================================================]

-#

-# Include other common build descriptions

-#

-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"

-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"

-

-

-

-[=============================================================================]

-[Fv.Fv.Attributes]

-

-[Fv.Fv.options]

-

-[build.fv.Fv]

-

-[=============================================================================]

-#

-# These are the libraries that will be built by the master makefile

-#

-[=============================================================================]

-[Libraries]

-DEFINE EDK_PREFIX=

-

-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"

-

-#

-# EdkII Glue Library

-#

-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"

-

-[=============================================================================]

-#

-# These are platform specific libraries that must be built prior to building

-# certain drivers that depend upon them.

-#

-[=============================================================================]

-[Libraries.Platform]

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsSerialStatusCode\BsSerialStatusCode.inf

-

-#Other\Maintained\Application\Shell\Library\EfiShellLib.inf

-

-[=============================================================================]

-#

-# These are the components that will be built by the master makefile

-#

-[=============================================================================]

-[Components]

-DEFINE PACKAGE=Default

-

-#Add EDK INF file here:

-#Other\Maintained\Application\Shell\Shell.inf

-

-

-[=============================================================================]

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile
deleted file mode 100644
index 7df7d84cbf..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile
+++ /dev/null
@@ -1,140 +0,0 @@
-#/*++

-#

-#  Copyright (c) 2004 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#  

-#    Makefile

-#  

-#  Abstract:

-#   

-#    This makefile is used to build the IPF build tip.

-#   

-#--*/

-

-#

-# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined

-#

-!IFNDEF EDK_SOURCE

-!ERROR EDK_SOURCE environmental variable not set 

-!ENDIF

-

-!IFNDEF EDK_TOOLS_PATH

-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used

-!ENDIF

-

-#

-# Set the processor type

-#

-PROCESSOR = IPF

-

-#

-# Define a toolchain so we can pick up the basic defines from

-# the EFI tool setup file.

-#

-TOOLCHAIN = TOOLCHAIN_MSVC

-

-!INCLUDE PlatformTools.env

-

-#

-# Target to build customer config

-#

-all : tempstamp_file build_tools makefiles builds

-

-#

-# Create a file to store the date and time, and used by SetStamp.exe

-#

-tempstamp_file:

-!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP)

-  @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt

-!ELSEIF EXIST(GenStamp.txt)

-  - @del GenStamp.txt

-!ENDIF

-

-#

-# Make all the EFI build tools by calling the makefile

-#

-build_tools :

-  -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)

-  -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)

-  $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)

-  $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt

-

-#

-# Run the utility that processes our description files and generates the

-# makefiles. Specify -v option for more verbose output.

-# Specify "-xref filename" to generate a cross-reference file of 

-# basename-to-fileguid that can be used by VolInfo.

-#

-makefiles :

-  $(PROCESSDSC)                                    \

-    -d EFI_SOURCE=$(EDK_SOURCE)                    \

-    -d EDK_SOURCE=$(EDK_SOURCE)                    \

-    -d PROCESSOR=$(PROCESSOR)                      \

-    -d PROJECT_NAME=$(PROJECT_NAME)                \

-    -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT)             \

-    -d COMPRESS_METHOD=$(COMPRESS_METHOD)          \

-    -d UEFI_PREFIX=$(UEFI_PREFIX)                  \

-    -d PI_PREFIX=$(PI_PREFIX)                      \

-    -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt        \

-    $(PROJECT_NAME).dsc

-

-

-#

-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc

-# creates the makefile.out that calls all the component makefiles.

-#

-builds :

-  $(MAKE) -f makefile.out libraries

-  $(MAKE) -f makefile.out components

-

-#

-# Create a target to clean up all build directories

-#

-clean :

-  - @if exist vc??.* del vc??.* > NUL

-  - @if exist *.bak del *.bak > NUL

-  - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL

-  - @if exist ebc rd /s /q ebc > NUL

-  - @if exist fv rd /s /q fv > NUL

-  - @if exist Tools rd /s /q Tools > NUL

-  - @if exist makefile.out del makefile.out > NUL

-  - @if exist module.* del module.* > NUL

-  - @echo All targets cleaned

-

-#

-# Clean up all build directories except for tools.

-#

-cleanbuilds :

-  - @if exist *.bak del *.bak > NUL

-  - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL

-  - @if exist ebc rd /s /q ebc > NUL

-  - @if exist fv rd /s /q fv > NUL

-  - @if exist makefile.out del makefile.out > NUL

-  - @if exist module.* del module.* > NUL

-  - @echo All modules cleaned

-

-#

-# Clean up only the tools

-#

-cleantools :

-  - @if exist vc??.* del vc??.* > NUL

-  - @if exist Tools rd /s /q Tools > NUL

-  - @echo All tools cleaned

-

-#

-# Rebuild target, clean and build all

-#

-rebuild : clean all

-

-#

-# cleanall target to clean all build directories.

-#

-cleanall : clean

diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env
deleted file mode 100644
index b12060e6d1..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env
+++ /dev/null
@@ -1,69 +0,0 @@
-#/*++

-#   

-#  Copyright (c) 2004 - 2006, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#

-#    PlatformTools.env

-#   

-#  Abstract:

-#   

-#    This file is used to define platform specific environment variables.

-#    It gets included by every makefile.

-#   

-#--*/

-

-!INCLUDE Config.env

-

-#

-# Set the project name

-#

-PROJECT_NAME = IPF

-

-#

-# Set the build directory

-#

-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)

-

-#

-# Define compiler names

-#

-

-!IFNDEF EDK_TOOLS_PATH

-EFI_ASL_LOCAL           = YES

-!ELSE 

-!IF "$(USE_NEWDDK)" == "YES"

-EFI_COMPILER_NAME       = DDK3790.1830

-EFI_ASSEMBLER_NAME      = DDK3790.1830

-!ELSE

-EFI_COMPILER_NAME       = DDK3790

-EFI_ASSEMBLER_NAME      = DDK3790

-!ENDIF

-EFI_ASL_LOCAL           = NO

-!ENDIF

-

-#

-# These flags are specific to this platform.  If a flag is not specific to this 

-# platform the flag should be placed in the CommonTools.env file.

-# Processor architecture specific and global macros can be found in 

-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.

-#

-C_PROJ_FLAGS          = /Os

-ASM_PROJ_FLAGS        =

-LINK_PROJ_FLAGS       = /ALIGN:32

-LIB_PROJ_FLAGS        =

-EBC_C_PROJ_FLAGS      =

-EBC_LINK_PROJ_FLAGS   =

-EBC_LIB_PROJ_FLAGS    =

-

-#

-# Include processor architecture specific and general EFI build flags.

-#

-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env
\ No newline at end of file
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat
deleted file mode 100644
index c224c2ee74..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat
+++ /dev/null
@@ -1,304 +0,0 @@
-@rem #/*++

-@rem #  

-@rem #  Copyright (c) 2007, Intel Corporation                                                         

-@rem #  All rights reserved. This program and the accompanying materials                          

-@rem #  are licensed and made available under the terms and conditions of the BSD License         

-@rem #  which accompanies this distribution.  The full text of the license may be found at        

-@rem #  http://opensource.org/licenses/bsd-license.php                                            

-@rem #                                                                                            

-@rem #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-@rem #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-@rem #  

-@rem #  Module Name:

-@rem #  

-@rem #    build.bat

-@rem #  

-@rem #  Abstract:

-@rem #    

-@rem #    This script provides single module build, clean and find function

-@rem #    based on module name.

-@rem #    

-@rem #    The auto-generated module.list file records all module names 

-@rem #    described in the current platform.dsc.

-@rem #    

-@rem #--*/ 

-

-@echo off

-

-setlocal

-@rem initilize local variable

-set FUNCTION=build

-set MODULE=

-set UPDATE=

-set VERBOSE=

-

-:parse

-if /I "%1"=="/c" (

-  set FUNCTION=clean

-  shift

-  goto parse

-)

-if /I "%1"=="clean" (

-  set FUNCTION=clean

-  shift

-  goto parse

-)

-if /I "%1"=="/r" (

-  set FUNCTION=rebuild

-  shift

-  goto parse

-)

-if /I "%1"=="/h" (

-  set FUNCTION=usage

-  shift

-  goto parse

-)

-if /I "%1"=="/?" (

-  set FUNCTION=usage

-  shift

-  goto parse

-)

-if /I "%1"=="/f" (

-  set FUNCTION=find

-  shift

-  goto parse

-)

-if /I "%1"=="/a" (

-  set UPDATE=TRUE

-  shift

-  goto parse

-)

-if /I "%1"=="/v" (

-  set VERBOSE=TRUE

-  shift

-  goto parse

-)

-if not "%1"=="" (

-  set MODULE=%1

-  shift

-  goto parse

-) else (

-  @rem no other paramters

-  if "%FUNCTION%"=="rebuild" goto build

-  goto %FUNCTION%

-)

-

-:build

-set StartTime=%time%

-@rem if no input, build all

-if "%MODULE%"=="" (

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile clean

-  )

-  nmake -nologo -f Makefile all

-  goto endtime

-)

-@rem then try to build special targets: all, fast, tools.

-if /I "%MODULE%"=="all" (

-  @rem build all modules and tools.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile cleanall

-  )

-  nmake -nologo -f Makefile all

-  goto endtime

-)

-if /I "%MODULE%"=="fast" (

-  @rem build fast target to skip FV=NULL modules.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile clean

-  )

-  nmake -nologo -f Makefile fast

-  goto endtime

-)

-if /I "%MODULE%"=="tools" (

-  @rem build all tools.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile cleantools

-  )

-  nmake -nologo -f Makefile build_tools

-  echo.

-  echo All tools are built.

-  goto endtime

-)

-@rem build single module, update build makefiles

-if "%FUNCTION%"=="rebuild" (

-  nmake -nologo -f module.mak %MODULE%Clean 2>NUL

-)

-nmake -nologo -f Makefile flashmap > NUL 2>&1

-nmake -nologo -f Makefile makefiles

-if errorlevel 1 goto builderror

-@rem check whether input module name is described in current dsc file. 

-findstr /I /C:" %MODULE% " module.list > NUL

-if errorlevel 1 (

-  echo.

-  echo.

-  findstr /I /C:"%MODULE%" module.list > NUL

-  if errorlevel 1 goto finderror

-  for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  echo.

-  echo Warning!!! Your specified module name can't be found. 

-  echo One of the above modules may be what you want to build.

-  goto end

-)

-@rem build this module

-nmake -nologo -f module.mak %MODULE%Build 

-echo.

-if "%FUNCTION%"=="rebuild" (

-  echo Module %MODULE% is rebuilt.

-) else (

-  echo Module %MODULE% is built.

-)

-:endtime

-@rem output build time.

-set EndTime=%time%

-echo.

-echo Start time %StartTime%

-echo End   time %EndTime%

-goto end

-

-:clean

-@rem if no input, default clean all build directories.

-if "%MODULE%"=="" (

-  nmake -nologo -f Makefile clean

-  goto end

-)

-@rem first try to clean special tasks: all, modules and tools

-if /I "%MODULE%"=="all" (

-  nmake -nologo -f Makefile cleanall

-  goto end

-)

-if /I "%MODULE%"=="modules" (

-  nmake -nologo -f Makefile cleanbuilds

-  goto end

-)

-if /I "%MODULE%"=="tools" (

-  nmake -nologo -f Makefile cleantools

-  goto end

-)

-@rem clean single module  

-@rem check whether input module name is in module.list file. 

-if not exist module.list (

-  echo Module list info doesn't exist.

-  echo Processing dsc file to generate module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-findstr /I /C:" %MODULE% " module.list > NUL

-if errorlevel 1 (

-  echo.

-  findstr /I /C:"%MODULE%" module.list > NUL

-  if errorlevel 1 goto finderror

-  for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  echo.

-  echo Warning!!! Your specified module name can't be found. 

-  echo One of the above modules may be what you want to clean. 

-  goto end

-)

-@rem clean this module 

-nmake -nologo -f module.mak %MODULE%Clean 2>NUL

-echo.

-echo Module %MODULE% is cleaned.

-goto end

-

-:find

-@rem find match module name by subname.

-if "%UPDATE%"=="TRUE" (

-  echo Processing dsc file to update module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-if not exist module.list (

-  echo Module list info doesn't exist.

-  echo Processing dsc file to generate module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-if "%MODULE%"=="" (

-  @rem display all

-  echo.

-  if "%VERBOSE%"=="TRUE" ( 

-    type module.list

-  ) else (

-    @rem only output module name without module.inf file name

-    for /F %%A in (module.list) do echo  %%A

-  )

-) else (

-  @rem display match module name

-  echo.

-  if "%VERBOSE%"=="TRUE" (

-    findstr /I /C:"%MODULE%" module.list

-    if errorlevel 1 goto notfind

-  ) else (

-    findstr /I /C:"%MODULE%" module.list > NUL

-    if errorlevel 1 goto notfind

-    for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  )

-)

-goto end

-

-:usage

-echo build or clean single module based on module name after tools are built.

-echo.

-echo build [/r] [/c] [/f] [/h] [modulename]

-echo.

-echo build [/r] [modulename]

-echo       build single module, such as build DxeMain.

-echo       If /r is specified, the target will be rebuit after cleaned first.

-echo       if no input modulename or modulename is all, then build all

-echo       Specail build targets: all, fast, tools.

-echo       These special targets may not exist in your tip main makefile.

-echo       build       - build all tools and modules

-echo       build all   - build all tools and modules

-echo       build fast  - build all without FV=NULL modules

-echo       build tools - build all tools.

-echo.

-echo build /c    [modulename]

-echo build clean [modulename]

-echo       remove the temp generated files for single module  

-echo       if no input modulename, then clean all

-echo       Specail clean targets: all, modules, tools.

-echo       These special targets may not exist in your tip main makefile.

-echo       build /c         - clean up all build directories

-echo       build /c all     - clean up all build directories and binary dirs.

-echo       build /c modules - clean up all build directories except for tools.

-echo       build /c tools   - clean up only tools directory.

-echo.

-echo build /f [/a] [/v] [subname]

-echo       find all matched modulename with the sub string of module name.

-echo       option /a re-processes dsc files to update module name list.

-echo       option /v outputs module name and module.inf file name both.

-echo.

-echo build /h

-echo build /?

-echo       display help information. 

-echo.

-goto end

-

-:notfind

-echo Warning!!! Your specified module name can't be found.

-echo Try to use /f /a options to update module name list.

-goto end

-

-:finderror

-echo Warning!!! Your specified module name can't be found.

-echo Try to use /f to find modules that you want to build.

-echo Or use /h to get the helpinfo of this script.

-goto end

-

-:builderror

-if exist error.log type error.log

-echo.

-if not exist Tools\ProcessDsc.exe (

-  echo.

-  echo Error!!! Build tools may not be ready. Try to build tools first.

-  echo.

-)

-del module.* > NUL 2>&1

-goto end

-

-:end

-if exist error.log del error.log

-echo on

diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env
deleted file mode 100644
index b846afe277..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env
+++ /dev/null
@@ -1,33 +0,0 @@
-#/*++

-#   

-#  Copyright (c) 2006 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#

-#    Config.env

-#   

-#  Abstract:

-#   

-#    This file is used to define platform build configuration.

-#    It gets included by PlatformTools.env.

-#   

-#--*/

-

-BUILD_TARGET_DIRECTORY         = Build

-EFI_DEBUG                      = NO

-EFI_DEBUG_CLEAR_MEMORY         = NO

-EFI_PEI_PERFORMANCE            = NO

-EFI_DXE_PERFORMANCE            = NO

-EFI_SYMBOLIC_DEBUG             = NO

-EFI_GENERATE_INTERMEDIATE_FILE = NO

-UEFI_MODE                      = YES

-USE_VC8                        = NO

-USE_VC8_X64                    = NO

-USE_NEWDDK                     = YES

diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile
deleted file mode 100644
index bbb1ad36ca..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile
+++ /dev/null
@@ -1,147 +0,0 @@
-#/*++

-#

-#  Copyright (c) 2006 - 2007, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:  

-#    Makefile

-#  

-#  Abstract:

-#    Makefile for this build tip

-#   

-#--*/

-

-#

-# Everything depends on EDK_SOURCE being set. 

-#

-!IFNDEF EDK_SOURCE

-!ERROR EDK_SOURCE environmental variable not set 

-!ENDIF

-

-!IFNDEF EDK_TOOLS_PATH

-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used

-!ENDIF

-

-#

-# Set the processor type

-#

-PROCESSOR = IA32

-

-#

-# Define a toolchain so we can pick up the basic defines from

-# the EFI tool setup file.

-#

-TOOLCHAIN = TOOLCHAIN_MSVC

-

-#

-# Include the platform-specific settings file

-#

-!INCLUDE PlatformTools.env

-

-#

-# Default target to create the makefiles and then build the drivers

-#

-all : build_tools makefiles builds

-

-#

-# Make all the build tools by calling the makefile

-#

-build_tools :

-  -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)

-  -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)

-  $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)

-  $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt

-

-PROCESSOR=X64

-

-#

-# Run ProcessDsc on our main description files to generate the

-# makefiles and package files. Specify -v option for more verbose output.

-# Specify "-xref filename" to generate a cross-reference file of 

-# basename-to-fileguid that can be used by VolInfo.

-#

-makefiles : 

-  $(PROCESSDSC)                             \

-    -d EFI_SOURCE=$(EDK_SOURCE)             \

-    -d EDK_SOURCE=$(EDK_SOURCE)             \

-    -d PROCESSOR=$(PROCESSOR)               \

-    -d PROJECT_NAME=$(PROJECT_NAME)         \

-    -d PROJECT_FAMILY=$(PROJECT_FAMILY)     \

-    -d UEFI_PREFIX=$(UEFI_PREFIX)           \

-    -d PI_PREFIX=$(PI_PREFIX)               \

-    -d COMPRESS_METHOD=$(COMPRESS_METHOD)   \

-    -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT)      \

-    -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \

-    $(PROJECT_NAME).dsc

-

-#

-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc

-# creates the makefile.out that calls all the component makefiles.

-#

-builds :

-  $(MAKE) -f makefile.out libraries

-  $(MAKE) -f makefile.out components

-

-#

-# Define a pseudo-target to start building with the libraries or with the 

-# components.

-#

-libraries :

-  $(MAKE) -f makefile.out libraries 

-

-components :

-  $(MAKE) -f makefile.out components 

-

-#

-# Create a target to clean up all build directories

-#

-clean :

-  - @if exist vc??.* del vc??.* > NUL

-  - @if exist *.bak del *.bak > NUL

-  - @if exist ia32 rd /s/q ia32 > NUL

-  - @if exist ipf rd /s /q ipf > NUL

-  - @if exist ebc rd /s /q ebc > NUL

-  - @if exist x64 rd /s /q x64 > NUL

-  - @if exist fv rd /s /q fv > NUL

-  - @if exist Tools rd /s /q Tools > NUL

-  - @if exist makefile.out del makefile.out > NUL

-  - @if exist module.* del module.* > NUL

-  - @echo All targets cleaned

-

-#

-# Clean up all build directories except for tools.

-#

-cleanbuilds :

-  - @if exist *.bak del *.bak > NUL

-  - @if exist ia32 rd /s/q ia32 > NUL

-  - @if exist ipf rd /s /q ipf > NUL

-  - @if exist ebc rd /s /q ebc > NUL

-  - @if exist x64 rd /s /q x64 > NUL

-  - @if exist fv rd /s /q fv > NUL

-  - @if exist makefile.out del makefile.out > NUL

-  - @if exist module.* del module.* > NUL

-  - @echo All modules cleaned

-

-#

-# Clean up only the tools

-#

-cleantools :

-  - @if exist vc??.* del vc??.* > NUL

-  - @if exist Tools rd /s /q Tools > NUL

-  - @echo All tools cleaned

-

-#

-# Rebuild target, clean and build all

-#

-rebuild : clean all

-

-#

-# cleanall target to clean all build directories.

-#

-cleanall : clean

diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env
deleted file mode 100644
index 79882f3b89..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env
+++ /dev/null
@@ -1,65 +0,0 @@
-#/*++

-#   

-#  Copyright (c) 2006, Intel Corporation                                                         

-#  All rights reserved. This program and the accompanying materials                          

-#  are licensed and made available under the terms and conditions of the BSD License         

-#  which accompanies this distribution.  The full text of the license may be found at        

-#  http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                            

-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-#  

-#  Module Name:

-#

-#    PlatformTools.env

-#   

-#  Abstract: 

-#    This file is used to define platform specific environment variables.

-#    It gets included by every makefile.

-#   

-#--*/

-

-!INCLUDE Config.env

-

-#

-# Set the project name

-#

-PROJECT_NAME = X64

-

-#

-# Set the build directory

-#

-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)

-

-#

-# Define compiler names

-#

-!IFNDEF EDK_TOOLS_PATH

-EFI_ASL_LOCAL           = YES

-!ELSE

-EFI_ASSEMBLER_NAME      = Masm611

-EFI_COMPILER_X64_NAME   = AMD64

-EFI_ASL_LOCAL           = NO

-!ENDIF

-

-#

-# These flags are specific to this platform.  If a flag is not specific to this 

-# platform the flag should be placed in the CommonTools.env file.

-# Processor architecture specific and global macros can be found in 

-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.

-#

-C_PROJ_FLAGS          = /O1

-ASM_PROJ_FLAGS        =

-LINK_PROJ_FLAGS       = /ALIGN:32

-LIB_PROJ_FLAGS        =

-EBC_C_PROJ_FLAGS      =

-EBC_LINK_PROJ_FLAGS   =

-EBC_LIB_PROJ_FLAGS    =

-

-#

-# Include processor architecture specific and general Tiano build flags.

-#

-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env

-

-

-

diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc b/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc
deleted file mode 100644
index 2893d8794c..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc
+++ /dev/null
@@ -1,104 +0,0 @@
-#/*++

-#

-# Copyright (c) 2006 - 2007, Intel Corporation                                                         

-# All rights reserved. This program and the accompanying materials                          

-# are licensed and made available under the terms and conditions of the BSD License         

-# which accompanies this distribution.  The full text of the license may be found at        

-# http://opensource.org/licenses/bsd-license.php                                            

-#                                                                                           

-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-# 

-#  Module Name:

-#

-#    X64.dsc

-#

-#  Abstract:

-#

-#    This is the build description file containing the platform 

-#    build definitions.

-#

-#

-#  Notes:

-#    

-#    The info in this file is broken down into sections. The start of a section

-#    is designated by a "[" in the first column. So the [=====] separater ends

-#    a section.

-#    

-#--*/

-

-

-[=============================================================================]

-#

-# This section gets processed first by the utility. Define any

-# macros that you may use elsewhere in this description file. This is the

-# mechanism by which you can pass parameters and defines to the makefiles

-# generated for each component. You can define it here, and then make an

-# assignment in the [makefile.common] section. For example, if here you

-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in

-# the [makefile.common] section and it becomes MY_VAR = my_var_value in

-# the output makefiles for each component.

-#

-[Defines]

-PLATFORM                  = $(PROJECT_NAME)

-

-[=============================================================================]

-#

-# Include other common build descriptions

-#

-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"

-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"

-

-[=============================================================================]

-[Fv.Fv.Attributes]

-

-[Fv.Fv.options]

-

-[Build.Fv.Fv]

-

-[=============================================================================]

-#

-# These are the libraries that will be built by the master makefile

-#

-[=============================================================================]

-[Libraries]

-DEFINE EDK_PREFIX=

-

-DEFINE PROCESSOR=IA32

-

-!include "$(EDK_SOURCE)\Sample\Platform\EdkLib32.dsc"

-

-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLib32.dsc"

-

-DEFINE PROCESSOR=X64

-

-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"

-

-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"

-

-[=============================================================================]

-#

-# These are platform specific libraries that must be built prior to building

-# certain drivers that depend upon them.

-#

-[=============================================================================]

-[Libraries.Platform]

-

-DEFINE PROCESSOR=X64

-

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf

-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf

-

-[=============================================================================]

-#

-# These are the components that will be built by the master makefile

-#

-[=============================================================================]

-[Components]

-DEFINE PACKAGE=Default

-

-#Add EDK INF file here:

-#Other\Maintained\Application\Shell\ShellFull.inf

-

-

-[=============================================================================]
\ No newline at end of file
diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat
deleted file mode 100644
index c224c2ee74..0000000000
--- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat
+++ /dev/null
@@ -1,304 +0,0 @@
-@rem #/*++

-@rem #  

-@rem #  Copyright (c) 2007, Intel Corporation                                                         

-@rem #  All rights reserved. This program and the accompanying materials                          

-@rem #  are licensed and made available under the terms and conditions of the BSD License         

-@rem #  which accompanies this distribution.  The full text of the license may be found at        

-@rem #  http://opensource.org/licenses/bsd-license.php                                            

-@rem #                                                                                            

-@rem #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

-@rem #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

-@rem #  

-@rem #  Module Name:

-@rem #  

-@rem #    build.bat

-@rem #  

-@rem #  Abstract:

-@rem #    

-@rem #    This script provides single module build, clean and find function

-@rem #    based on module name.

-@rem #    

-@rem #    The auto-generated module.list file records all module names 

-@rem #    described in the current platform.dsc.

-@rem #    

-@rem #--*/ 

-

-@echo off

-

-setlocal

-@rem initilize local variable

-set FUNCTION=build

-set MODULE=

-set UPDATE=

-set VERBOSE=

-

-:parse

-if /I "%1"=="/c" (

-  set FUNCTION=clean

-  shift

-  goto parse

-)

-if /I "%1"=="clean" (

-  set FUNCTION=clean

-  shift

-  goto parse

-)

-if /I "%1"=="/r" (

-  set FUNCTION=rebuild

-  shift

-  goto parse

-)

-if /I "%1"=="/h" (

-  set FUNCTION=usage

-  shift

-  goto parse

-)

-if /I "%1"=="/?" (

-  set FUNCTION=usage

-  shift

-  goto parse

-)

-if /I "%1"=="/f" (

-  set FUNCTION=find

-  shift

-  goto parse

-)

-if /I "%1"=="/a" (

-  set UPDATE=TRUE

-  shift

-  goto parse

-)

-if /I "%1"=="/v" (

-  set VERBOSE=TRUE

-  shift

-  goto parse

-)

-if not "%1"=="" (

-  set MODULE=%1

-  shift

-  goto parse

-) else (

-  @rem no other paramters

-  if "%FUNCTION%"=="rebuild" goto build

-  goto %FUNCTION%

-)

-

-:build

-set StartTime=%time%

-@rem if no input, build all

-if "%MODULE%"=="" (

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile clean

-  )

-  nmake -nologo -f Makefile all

-  goto endtime

-)

-@rem then try to build special targets: all, fast, tools.

-if /I "%MODULE%"=="all" (

-  @rem build all modules and tools.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile cleanall

-  )

-  nmake -nologo -f Makefile all

-  goto endtime

-)

-if /I "%MODULE%"=="fast" (

-  @rem build fast target to skip FV=NULL modules.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile clean

-  )

-  nmake -nologo -f Makefile fast

-  goto endtime

-)

-if /I "%MODULE%"=="tools" (

-  @rem build all tools.

-  if "%FUNCTION%"=="rebuild" (

-    nmake -nologo -f Makefile cleantools

-  )

-  nmake -nologo -f Makefile build_tools

-  echo.

-  echo All tools are built.

-  goto endtime

-)

-@rem build single module, update build makefiles

-if "%FUNCTION%"=="rebuild" (

-  nmake -nologo -f module.mak %MODULE%Clean 2>NUL

-)

-nmake -nologo -f Makefile flashmap > NUL 2>&1

-nmake -nologo -f Makefile makefiles

-if errorlevel 1 goto builderror

-@rem check whether input module name is described in current dsc file. 

-findstr /I /C:" %MODULE% " module.list > NUL

-if errorlevel 1 (

-  echo.

-  echo.

-  findstr /I /C:"%MODULE%" module.list > NUL

-  if errorlevel 1 goto finderror

-  for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  echo.

-  echo Warning!!! Your specified module name can't be found. 

-  echo One of the above modules may be what you want to build.

-  goto end

-)

-@rem build this module

-nmake -nologo -f module.mak %MODULE%Build 

-echo.

-if "%FUNCTION%"=="rebuild" (

-  echo Module %MODULE% is rebuilt.

-) else (

-  echo Module %MODULE% is built.

-)

-:endtime

-@rem output build time.

-set EndTime=%time%

-echo.

-echo Start time %StartTime%

-echo End   time %EndTime%

-goto end

-

-:clean

-@rem if no input, default clean all build directories.

-if "%MODULE%"=="" (

-  nmake -nologo -f Makefile clean

-  goto end

-)

-@rem first try to clean special tasks: all, modules and tools

-if /I "%MODULE%"=="all" (

-  nmake -nologo -f Makefile cleanall

-  goto end

-)

-if /I "%MODULE%"=="modules" (

-  nmake -nologo -f Makefile cleanbuilds

-  goto end

-)

-if /I "%MODULE%"=="tools" (

-  nmake -nologo -f Makefile cleantools

-  goto end

-)

-@rem clean single module  

-@rem check whether input module name is in module.list file. 

-if not exist module.list (

-  echo Module list info doesn't exist.

-  echo Processing dsc file to generate module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-findstr /I /C:" %MODULE% " module.list > NUL

-if errorlevel 1 (

-  echo.

-  findstr /I /C:"%MODULE%" module.list > NUL

-  if errorlevel 1 goto finderror

-  for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  echo.

-  echo Warning!!! Your specified module name can't be found. 

-  echo One of the above modules may be what you want to clean. 

-  goto end

-)

-@rem clean this module 

-nmake -nologo -f module.mak %MODULE%Clean 2>NUL

-echo.

-echo Module %MODULE% is cleaned.

-goto end

-

-:find

-@rem find match module name by subname.

-if "%UPDATE%"=="TRUE" (

-  echo Processing dsc file to update module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-if not exist module.list (

-  echo Module list info doesn't exist.

-  echo Processing dsc file to generate module list info.

-  nmake -nologo -f Makefile flashmap > NUL 2>&1

-  nmake -nologo -f Makefile makefiles > error.log 2>&1

-  if errorlevel 1 goto builderror

-)

-if "%MODULE%"=="" (

-  @rem display all

-  echo.

-  if "%VERBOSE%"=="TRUE" ( 

-    type module.list

-  ) else (

-    @rem only output module name without module.inf file name

-    for /F %%A in (module.list) do echo  %%A

-  )

-) else (

-  @rem display match module name

-  echo.

-  if "%VERBOSE%"=="TRUE" (

-    findstr /I /C:"%MODULE%" module.list

-    if errorlevel 1 goto notfind

-  ) else (

-    findstr /I /C:"%MODULE%" module.list > NUL

-    if errorlevel 1 goto notfind

-    for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo  %%A

-  )

-)

-goto end

-

-:usage

-echo build or clean single module based on module name after tools are built.

-echo.

-echo build [/r] [/c] [/f] [/h] [modulename]

-echo.

-echo build [/r] [modulename]

-echo       build single module, such as build DxeMain.

-echo       If /r is specified, the target will be rebuit after cleaned first.

-echo       if no input modulename or modulename is all, then build all

-echo       Specail build targets: all, fast, tools.

-echo       These special targets may not exist in your tip main makefile.

-echo       build       - build all tools and modules

-echo       build all   - build all tools and modules

-echo       build fast  - build all without FV=NULL modules

-echo       build tools - build all tools.

-echo.

-echo build /c    [modulename]

-echo build clean [modulename]

-echo       remove the temp generated files for single module  

-echo       if no input modulename, then clean all

-echo       Specail clean targets: all, modules, tools.

-echo       These special targets may not exist in your tip main makefile.

-echo       build /c         - clean up all build directories

-echo       build /c all     - clean up all build directories and binary dirs.

-echo       build /c modules - clean up all build directories except for tools.

-echo       build /c tools   - clean up only tools directory.

-echo.

-echo build /f [/a] [/v] [subname]

-echo       find all matched modulename with the sub string of module name.

-echo       option /a re-processes dsc files to update module name list.

-echo       option /v outputs module name and module.inf file name both.

-echo.

-echo build /h

-echo build /?

-echo       display help information. 

-echo.

-goto end

-

-:notfind

-echo Warning!!! Your specified module name can't be found.

-echo Try to use /f /a options to update module name list.

-goto end

-

-:finderror

-echo Warning!!! Your specified module name can't be found.

-echo Try to use /f to find modules that you want to build.

-echo Or use /h to get the helpinfo of this script.

-goto end

-

-:builderror

-if exist error.log type error.log

-echo.

-if not exist Tools\ProcessDsc.exe (

-  echo.

-  echo Error!!! Build tools may not be ready. Try to build tools first.

-  echo.

-)

-del module.* > NUL 2>&1

-goto end

-

-:end

-if exist error.log del error.log

-echo on