diff options
author | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
---|---|---|
committer | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
commit | 808def96aa4589fba9c2d0ea55837754a3b7a4f7 (patch) | |
tree | 0ea221c59abb2474c694e7ab5bd61006be77e47e /EdkModulePkg/Bus/Pci/IdeBus/Dxe/atapi.c | |
parent | 9216450d1143056a50a5f916984a2d7faf590488 (diff) | |
download | edk2-platforms-808def96aa4589fba9c2d0ea55837754a3b7a4f7.tar.xz |
Retiring the ANT/JAVA build and removing the older EDK II packages that required ANT/JAVA.
Last Ant/Java build was r7166
Developers requiring the Java/Ant packages should checkout the branch from:
https://edk2.tianocore.org/svn/edk2/branches/AntJava
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7168 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'EdkModulePkg/Bus/Pci/IdeBus/Dxe/atapi.c')
-rw-r--r-- | EdkModulePkg/Bus/Pci/IdeBus/Dxe/atapi.c | 2140 |
1 files changed, 0 insertions, 2140 deletions
diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/atapi.c b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/atapi.c deleted file mode 100644 index 27f7f999fa..0000000000 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/atapi.c +++ /dev/null @@ -1,2140 +0,0 @@ -/** @file
- Copyright (c) 2006 - 2007, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "idebus.h"
-
-/**
- This function is used to get the current status of the media residing
- in the LS-120 drive or ZIP drive. The media status is returned in the
- Error Status.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @retval EFI_SUCCESS
- The media status is achieved successfully and the media
- can be read/written.
-
- @retval EFI_DEVICE_ERROR
- Get Media Status Command is failed.
-
- @retval EFI_NO_MEDIA
- There is no media in the drive.
-
- @retval EFI_WRITE_PROTECTED
- The media is writing protected.
-
- @note
- This function must be called after the LS120EnableMediaStatus()
- with second parameter set to TRUE
- (means enable media status notification) is called.
-
-**/
-STATIC
-EFI_STATUS
-LS120GetMediaStatus (
- IN IDE_BLK_IO_DEV *IdeDev
- )
-{
- UINT8 DeviceSelect;
- UINT8 StatusValue;
- EFI_STATUS EfiStatus;
- //
- // Poll Alternate Register for BSY clear within timeout.
- //
- EfiStatus = WaitForBSYClear2 (IdeDev, ATATIMEOUT);
- if (EFI_ERROR (EfiStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Select device via Device/Head Register.
- //
- DeviceSelect = (UINT8) ((IdeDev->Device) << 4 | 0xe0);
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, DeviceSelect);
-
- //
- // Poll Alternate Register for DRDY set within timeout.
- // After device is selected, DRDY set indicates the device is ready to
- // accept command.
- //
- EfiStatus = DRDYReady2 (IdeDev, ATATIMEOUT);
- if (EFI_ERROR (EfiStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Get Media Status Command is sent
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, 0xDA);
-
- //
- // BSY bit will clear after command is complete.
- //
- EfiStatus = WaitForBSYClear2 (IdeDev, ATATIMEOUT);
- if (EFI_ERROR (EfiStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // the media status is returned by the command in the ERROR register
- //
- StatusValue = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Error);
-
- if (StatusValue & bit1) {
- return EFI_NO_MEDIA;
- }
-
- if (StatusValue & bit6) {
- return EFI_WRITE_PROTECTED;
- } else {
- return EFI_SUCCESS;
- }
-}
-
-/**
- This function is used to send Enable Media Status Notification Command
- or Disable Media Status Notification Command.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[in] Enable
- a flag that indicates whether enable or disable media
- status notification.
-
- @retval EFI_SUCCESS
- If command completes successfully.
-
- @retval EFI_DEVICE_ERROR
- If command failed.
-
-**/
-STATIC
-EFI_STATUS
-LS120EnableMediaStatus (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN BOOLEAN Enable
- )
-{
- UINT8 DeviceSelect;
- EFI_STATUS Status;
-
- //
- // Poll Alternate Register for BSY clear within timeout.
- //
- Status = WaitForBSYClear2 (IdeDev, ATATIMEOUT);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Select device via Device/Head Register.
- //
- DeviceSelect = (UINT8) ((IdeDev->Device) << 4 | 0xe0);
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, DeviceSelect);
-
- //
- // Poll Alternate Register for DRDY set within timeout.
- // After device is selected, DRDY set indicates the device is ready to
- // accept command.
- //
- Status = DRDYReady2 (IdeDev, ATATIMEOUT);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- if (Enable) {
- //
- // 0x95: Enable media status notification
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x95);
- } else {
- //
- // 0x31: Disable media status notification
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x31);
- }
- //
- // Set Feature Command is sent
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, 0xEF);
-
- //
- // BSY bit will clear after command is complete.
- //
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is called by DiscoverIdeDevice() during its device
- identification.
-
- Its main purpose is to get enough information for the device media
- to fill in the Media data structure of the Block I/O Protocol interface.
-
- There are 5 steps to reach such objective:
-
- 1. Sends out the ATAPI Identify Command to the specified device.
- Only ATAPI device responses to this command. If the command succeeds,
- it returns the Identify data structure which filled with information
- about the device. Since the ATAPI device contains removable media,
- the only meaningful information is the device module name.
-
- 2. Sends out ATAPI Inquiry Packet Command to the specified device.
- This command will return inquiry data of the device, which contains
- the device type information.
-
- 3. Allocate sense data space for future use. We don't detect the media
- presence here to improvement boot performance, especially when CD
- media is present. The media detection will be performed just before
- each BLK_IO read/write
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @retval EFI_SUCCESS
- Identify ATAPI device successfully.
-
- @retval EFI_DEVICE_ERROR
- ATAPI Identify Device Command failed or device type
- is not supported by this IDE driver.
-
- @note
- Parameter "IdeDev" will be updated in this function.
-
- TODO: EFI_OUT_OF_RESOURCES - add return value to function comment
- TODO: EFI_OUT_OF_RESOURCES - add return value to function comment
-**/
-EFI_STATUS
-ATAPIIdentify (
- IN IDE_BLK_IO_DEV *IdeDev
- )
-{
- EFI_IDENTIFY_DATA *AtapiIdentifyPointer;
- UINT8 DeviceSelect;
- EFI_STATUS Status;
-
- //
- // device select bit
- //
- DeviceSelect = (UINT8) ((IdeDev->Device) << 4);
-
- AtapiIdentifyPointer = AllocatePool (sizeof (EFI_IDENTIFY_DATA));
- if (AtapiIdentifyPointer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
- //
- // Send ATAPI Identify Command to get IDENTIFY data.
- //
- Status = AtaPioDataIn (
- IdeDev,
- (VOID *) AtapiIdentifyPointer,
- sizeof (EFI_IDENTIFY_DATA),
- ATAPI_IDENTIFY_DEVICE_CMD,
- DeviceSelect,
- 0,
- 0,
- 0,
- 0
- );
-
- if (EFI_ERROR (Status)) {
- gBS->FreePool (AtapiIdentifyPointer);
- return EFI_DEVICE_ERROR;
- }
-
- IdeDev->pIdData = AtapiIdentifyPointer;
- PrintAtaModuleName (IdeDev);
-
- //
- // Send ATAPI Inquiry Packet Command to get INQUIRY data.
- //
- Status = AtapiInquiry (IdeDev);
- if (EFI_ERROR (Status)) {
- gBS->FreePool (IdeDev->pIdData);
- //
- // Make sure the pIdData will not be freed again.
- //
- IdeDev->pIdData = NULL;
- return EFI_DEVICE_ERROR;
- }
- //
- // Get media removable info from INQUIRY data.
- //
- IdeDev->BlkIo.Media->RemovableMedia = (UINT8) ((IdeDev->pInquiryData->RMB & 0x80) == 0x80);
-
- //
- // Identify device type via INQUIRY data.
- //
- switch (IdeDev->pInquiryData->peripheral_type & 0x1f) {
-
- //
- // Magnetic Disk
- //
- case 0x00:
-
- //
- // device is LS120 or ZIP drive.
- //
- IdeDev->Type = IdeMagnetic;
-
- IdeDev->BlkIo.Media->MediaId = 0;
- //
- // Give initial value
- //
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
-
- IdeDev->BlkIo.Media->LastBlock = 0;
- IdeDev->BlkIo.Media->BlockSize = 0x200;
- break;
-
- //
- // CD-ROM
- //
- case 0x05:
-
- IdeDev->Type = IdeCdRom;
- IdeDev->BlkIo.Media->MediaId = 0;
- //
- // Give initial value
- //
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
-
- IdeDev->BlkIo.Media->LastBlock = 0;
- IdeDev->BlkIo.Media->BlockSize = 0x800;
- IdeDev->BlkIo.Media->ReadOnly = TRUE;
- break;
-
- //
- // Tape
- //
- case 0x01:
-
- //
- // WORM
- //
- case 0x04:
-
- //
- // Optical
- //
- case 0x07:
-
- default:
- IdeDev->Type = IdeUnknown;
- gBS->FreePool (IdeDev->pIdData);
- gBS->FreePool (IdeDev->pInquiryData);
- //
- // Make sure the pIdData and pInquiryData will not be freed again.
- //
- IdeDev->pIdData = NULL;
- IdeDev->pInquiryData = NULL;
- return EFI_DEVICE_ERROR;
- }
-
- //
- // original sense data numbers
- //
- IdeDev->SenseDataNumber = 20;
-
- IdeDev->SenseData = AllocatePool (IdeDev->SenseDataNumber * sizeof (REQUEST_SENSE_DATA));
- if (IdeDev->SenseData == NULL) {
- gBS->FreePool (IdeDev->pIdData);
- gBS->FreePool (IdeDev->pInquiryData);
- //
- // Make sure the pIdData and pInquiryData will not be freed again.
- //
- IdeDev->pIdData = NULL;
- IdeDev->pInquiryData = NULL;
- return EFI_OUT_OF_RESOURCES;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Sends out ATAPI Inquiry Packet Command to the specified device.
- This command will return INQUIRY data of the device.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @retval EFI_SUCCESS
- Inquiry command completes successfully.
-
- @retval EFI_DEVICE_ERROR
- Inquiry command failed.
-
- @note
- Parameter "IdeDev" will be updated in this function.
-
-**/
-EFI_STATUS
-AtapiInquiry (
- IN IDE_BLK_IO_DEV *IdeDev
- )
-{
- ATAPI_PACKET_COMMAND Packet;
- EFI_STATUS Status;
- INQUIRY_DATA *InquiryData;
-
- //
- // prepare command packet for the ATAPI Inquiry Packet Command.
- //
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Packet.Inquiry.opcode = INQUIRY;
- Packet.Inquiry.page_code = 0;
- Packet.Inquiry.allocation_length = sizeof (INQUIRY_DATA);
-
- InquiryData = AllocatePool (sizeof (INQUIRY_DATA));
- if (InquiryData == NULL) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Send command packet and get requested Inquiry data.
- //
- Status = AtapiPacketCommandIn (
- IdeDev,
- &Packet,
- (UINT16 *) InquiryData,
- sizeof (INQUIRY_DATA),
- ATAPITIMEOUT
- );
- if (EFI_ERROR (Status)) {
- gBS->FreePool (InquiryData);
- return EFI_DEVICE_ERROR;
- }
-
- IdeDev->pInquiryData = InquiryData;
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is used to send out ATAPI commands conforms to the
- Packet Command with PIO Data In Protocol.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[in] *Packet
- pointer pointing to ATAPI_PACKET_COMMAND data structure
- which contains the contents of the command.
-
- @param[in] *Buffer
- buffer contained data transferred from device to host.
-
- @param[in] ByteCount
- data size in byte unit of the buffer.
-
- @param[in] TimeOut
- this parameter is used to specify the timeout
- value for the PioReadWriteData() function.
-
- @retval EFI_SUCCESS
- send out the ATAPI packet command successfully
- and device sends data successfully.
-
- @retval EFI_DEVICE_ERROR
- the device failed to send data.
-
-**/
-EFI_STATUS
-AtapiPacketCommandIn (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN ATAPI_PACKET_COMMAND *Packet,
- IN UINT16 *Buffer,
- IN UINT32 ByteCount,
- IN UINTN TimeOut
- )
-{
- UINT16 *CommandIndex;
- EFI_STATUS Status;
- UINT32 Count;
-
- //
- // Set all the command parameters by fill related registers.
- // Before write to all the following registers, BSY and DRQ must be 0.
- //
- Status = DRQClear2 (IdeDev, ATAPITIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Select device via Device/Head Register.
- //
- IDEWritePortB (
- IdeDev->PciIo,
- IdeDev->IoPort->Head,
- (UINT8) ((IdeDev->Device << 4) | DEFAULT_CMD) // DEFAULT_CMD: 0xa0 (1010,0000)
- );
-
- //
- // No OVL; No DMA
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x00);
-
- //
- // set the transfersize to MAX_ATAPI_BYTE_COUNT to let the device
- // determine how many data should be transferred.
- //
- IDEWritePortB (
- IdeDev->PciIo,
- IdeDev->IoPort->CylinderLsb,
- (UINT8) (MAX_ATAPI_BYTE_COUNT & 0x00ff)
- );
- IDEWritePortB (
- IdeDev->PciIo,
- IdeDev->IoPort->CylinderMsb,
- (UINT8) (MAX_ATAPI_BYTE_COUNT >> 8)
- );
-
- //
- // DEFAULT_CTL:0x0a (0000,1010)
- // Disable interrupt
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DEFAULT_CTL);
-
- //
- // Send Packet command to inform device
- // that the following data bytes are command packet.
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, PACKET_CMD);
-
- Status = DRQReady (IdeDev, ATAPITIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Send out command packet
- //
- CommandIndex = Packet->Data16;
- for (Count = 0; Count < 6; Count++, CommandIndex++) {
-
- IDEWritePortW (IdeDev->PciIo, IdeDev->IoPort->Data, *CommandIndex);
- gBS->Stall (10);
- }
-
- //
- // call PioReadWriteData() function to get
- // requested transfer data form device.
- //
- return PioReadWriteData (IdeDev, Buffer, ByteCount, 1, TimeOut);
-}
-
-/**
- This function is used to send out ATAPI commands conforms to the
- Packet Command with PIO Data Out Protocol.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[in] *Packet
- pointer pointing to ATAPI_PACKET_COMMAND data structure
- which contains the contents of the command.
-
- @param[in] *Buffer
- buffer contained data transferred from host to device.
-
- @param[in] ByteCount
- data size in byte unit of the buffer.
-
- @param[in] TimeOut
- this parameter is used to specify the timeout
- value for the PioReadWriteData() function.
-
- @retval EFI_SUCCESS
- send out the ATAPI packet command successfully
- and device received data successfully.
-
- @retval EFI_DEVICE_ERROR
- the device failed to send data.
-
-**/
-EFI_STATUS
-AtapiPacketCommandOut (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN ATAPI_PACKET_COMMAND *Packet,
- IN UINT16 *Buffer,
- IN UINT32 ByteCount,
- IN UINTN TimeOut
- )
-{
- UINT16 *CommandIndex;
- EFI_STATUS Status;
- UINT32 Count;
-
- //
- // set all the command parameters
- // Before write to all the following registers, BSY and DRQ must be 0.
- //
- Status = DRQClear2 (IdeDev, ATAPITIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Select device via Device/Head Register.
- //
- IDEWritePortB (
- IdeDev->PciIo,
- IdeDev->IoPort->Head,
- (UINT8) ((IdeDev->Device << 4) | DEFAULT_CMD) // DEFAULT_CMD: 0xa0 (1010,0000)
- );
-
- //
- // No OVL; No DMA
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x00);
-
- //
- // set the transfersize to MAX_ATAPI_BYTE_COUNT to
- // let the device determine how many data should be transferred.
- //
- IDEWritePortB (
- IdeDev->PciIo,
- IdeDev->IoPort->CylinderLsb,
- (UINT8) (MAX_ATAPI_BYTE_COUNT & 0x00ff)
- );
- IDEWritePortB (
- IdeDev->PciIo,
- IdeDev->IoPort->CylinderMsb,
- (UINT8) (MAX_ATAPI_BYTE_COUNT >> 8)
- );
-
- //
- // DEFAULT_CTL:0x0a (0000,1010)
- // Disable interrupt
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DEFAULT_CTL);
-
- //
- // Send Packet command to inform device
- // that the following data bytes are command packet.
- //
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, PACKET_CMD);
-
- Status = DRQReady2 (IdeDev, ATAPITIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Send out command packet
- //
- CommandIndex = Packet->Data16;
- for (Count = 0; Count < 6; Count++, CommandIndex++) {
- IDEWritePortW (IdeDev->PciIo, IdeDev->IoPort->Data, *CommandIndex);
- gBS->Stall (10);
- }
-
- //
- // call PioReadWriteData() function to send requested transfer data to device.
- //
- return PioReadWriteData (IdeDev, Buffer, ByteCount, 0, TimeOut);
-}
-
-/**
- This function is called by either AtapiPacketCommandIn() or
- AtapiPacketCommandOut(). It is used to transfer data between
- host and device. The data direction is specified by the fourth
- parameter.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[in] *Buffer
- buffer contained data transferred between host and device.
-
- @param[in] ByteCount
- data size in byte unit of the buffer.
-
- @param[in] Read
- flag used to determine the data transfer direction.
- Read equals 1, means data transferred from device to host;
- Read equals 0, means data transferred from host to device.
-
- @param[in] TimeOut
- timeout value for wait DRQ ready before each data
- stream's transfer.
-
- @retval EFI_SUCCESS
- data is transferred successfully.
-
- @retval EFI_DEVICE_ERROR
- the device failed to transfer data.
-
-**/
-EFI_STATUS
-PioReadWriteData (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN UINT16 *Buffer,
- IN UINT32 ByteCount,
- IN BOOLEAN Read,
- IN UINTN TimeOut
- )
-{
- //
- // required transfer data in word unit.
- //
- UINT32 RequiredWordCount;
-
- //
- // actual transfer data in word unit.
- //
- UINT32 ActualWordCount;
- UINT32 WordCount;
- EFI_STATUS Status;
- UINT16 *PtrBuffer;
-
- //
- // No data transfer is premitted.
- //
- if (ByteCount == 0) {
- return EFI_SUCCESS;
- }
- //
- // for performance, we assert the ByteCount is an even number
- // which is actually a resonable assumption
- ASSERT((ByteCount%2) == 0);
-
- PtrBuffer = Buffer;
- RequiredWordCount = ByteCount / 2;
- //
- // ActuralWordCount means the word count of data really transferred.
- //
- ActualWordCount = 0;
-
- while (ActualWordCount < RequiredWordCount) {
-
- //
- // before each data transfer stream, the host should poll DRQ bit ready,
- // to see whether indicates device is ready to transfer data.
- //
- Status = DRQReady2 (IdeDev, TimeOut);
- if (EFI_ERROR (Status)) {
- return CheckErrorStatus (IdeDev);
- }
-
- //
- // read Status Register will clear interrupt
- //
- IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Status);
-
- //
- // get current data transfer size from Cylinder Registers.
- //
- WordCount = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb) << 8;
- WordCount = WordCount | IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb);
- WordCount = WordCount & 0xffff;
- WordCount /= 2;
-
- WordCount = EFI_MIN (WordCount, (RequiredWordCount - ActualWordCount));
-
- if (Read) {
- IDEReadPortWMultiple (
- IdeDev->PciIo,
- IdeDev->IoPort->Data,
- WordCount,
- PtrBuffer
- );
- } else {
- IDEWritePortWMultiple (
- IdeDev->PciIo,
- IdeDev->IoPort->Data,
- WordCount,
- PtrBuffer
- );
- }
-
- PtrBuffer += WordCount;
- ActualWordCount += WordCount;
- }
-
- if (Read) {
- //
- // In the case where the drive wants to send more data than we need to read,
- // the DRQ bit will be set and cause delays from DRQClear2().
- // We need to read data from the drive until it clears DRQ so we can move on.
- //
- AtapiReadPendingData (IdeDev);
- }
-
- //
- // After data transfer is completed, normally, DRQ bit should clear.
- //
- Status = DRQClear2 (IdeDev, ATAPITIMEOUT);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // read status register to check whether error happens.
- //
- return CheckErrorStatus (IdeDev);
-}
-
-/**
- Sends out ATAPI Test Unit Ready Packet Command to the specified device
- to find out whether device is accessible.
-
- @param[in] *IdeDev Pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
- @param[in] *SenseCount Sense count for this packet command
-
- @retval EFI_SUCCESS Device is accessible.
- @retval EFI_DEVICE_ERROR Device is not accessible.
-
-**/
-EFI_STATUS
-AtapiTestUnitReady (
- IN IDE_BLK_IO_DEV *IdeDev,
- OUT UINTN *SenseCount
- )
-{
- ATAPI_PACKET_COMMAND Packet;
- EFI_STATUS Status;
-
- *SenseCount = 0;
-
- //
- // fill command packet
- //
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Packet.TestUnitReady.opcode = TEST_UNIT_READY;
-
- //
- // send command packet
- //
- Status = AtapiPacketCommandIn (IdeDev, &Packet, NULL, 0, ATAPITIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = AtapiRequestSense (IdeDev, SenseCount);
- if (EFI_ERROR (Status)) {
- *SenseCount = 0;
- return Status;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Sends out ATAPI Request Sense Packet Command to the specified device.
- This command will return all the current Sense data in the device.
- This function will pack all the Sense data in one single buffer.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[out] **SenseBuffers
- allocated in this function, and freed by the calling function.
- This buffer is used to accommodate all the sense data returned
- by the device.
-
- @param[out] *BufUnit
- record the unit size of the sense data block in the SenseBuffers,
-
- @param[out] *BufNumbers
- record the number of units in the SenseBuffers.
-
- @retval EFI_SUCCESS
- Request Sense command completes successfully.
-
- @retval EFI_DEVICE_ERROR
- Request Sense command failed.
-
-**/
-EFI_STATUS
-AtapiRequestSense (
- IN IDE_BLK_IO_DEV *IdeDev,
- OUT UINTN *SenseCounts
- )
-{
- EFI_STATUS Status;
- REQUEST_SENSE_DATA *Sense;
- UINT16 *Ptr;
- BOOLEAN FetchSenseData;
- ATAPI_PACKET_COMMAND Packet;
-
- *SenseCounts = 0;
-
- ZeroMem (IdeDev->SenseData, sizeof (REQUEST_SENSE_DATA) * (IdeDev->SenseDataNumber));
- //
- // fill command packet for Request Sense Packet Command
- //
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Packet.RequestSence.opcode = REQUEST_SENSE;
- Packet.RequestSence.allocation_length = sizeof (REQUEST_SENSE_DATA);
-
- //
- // initialize pointer
- //
- Ptr = (UINT16 *) IdeDev->SenseData;
- //
- // request sense data from device continuously until no sense data
- // exists in the device.
- //
- for (FetchSenseData = TRUE; FetchSenseData;) {
-
- Sense = (REQUEST_SENSE_DATA *) Ptr;
-
- //
- // send out Request Sense Packet Command and get one Sense data form device
- //
- Status = AtapiPacketCommandIn (
- IdeDev,
- &Packet,
- Ptr,
- sizeof (REQUEST_SENSE_DATA),
- ATAPITIMEOUT
- );
- //
- // failed to get Sense data
- //
- if (EFI_ERROR (Status)) {
- if (*SenseCounts == 0) {
- return EFI_DEVICE_ERROR;
- } else {
- return EFI_SUCCESS;
- }
- }
-
- (*SenseCounts)++;
- //
- // We limit MAX sense data count to 20 in order to avoid dead loop. Some
- // incompatible ATAPI devices don't retrive NO_SENSE when there is no media.
- // In this case, dead loop occurs if we don't have a gatekeeper. 20 is
- // supposed to be large enough for any ATAPI device.
- //
- if ((Sense->sense_key != SK_NO_SENSE) && ((*SenseCounts) < 20)) {
- //
- // Ptr is word-based pointer
- //
- Ptr += (sizeof (REQUEST_SENSE_DATA) + 1) >> 1;
-
- } else {
- //
- // when no sense key, skip out the loop
- //
- FetchSenseData = FALSE;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Sends out ATAPI Read Capacity Packet Command to the specified device.
- This command will return the information regarding the capacity of the
- media in the device.
-
- Current device status will impact device's response to the Read Capacity
- Command. For example, if the device once reset, the Read Capacity
- Command will fail. The Sense data record the current device status, so
- if the Read Capacity Command failed, the Sense data must be requested
- and be analyzed to determine if the Read Capacity Command should retry.
-
- @param[in] *IdeDev Pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
- @param[in] SenseCount Sense count for this packet command
-
- @retval EFI_SUCCESS Read Capacity Command finally completes successfully.
- @retval EFI_DEVICE_ERROR Read Capacity Command failed because of device error.
-
- @note Parameter "IdeDev" will be updated in this function.
-
- TODO: EFI_NOT_READY - add return value to function comment
-**/
-EFI_STATUS
-AtapiReadCapacity (
- IN IDE_BLK_IO_DEV *IdeDev,
- OUT UINTN *SenseCount
- )
-{
- //
- // status returned by Read Capacity Packet Command
- //
- EFI_STATUS Status;
- EFI_STATUS SenseStatus;
- ATAPI_PACKET_COMMAND Packet;
-
- //
- // used for capacity data returned from ATAPI device
- //
- READ_CAPACITY_DATA Data;
- READ_FORMAT_CAPACITY_DATA FormatData;
-
- *SenseCount = 0;
-
- ZeroMem (&Data, sizeof (Data));
- ZeroMem (&FormatData, sizeof (FormatData));
-
- if (IdeDev->Type == IdeCdRom) {
-
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Packet.Inquiry.opcode = READ_CAPACITY;
- Status = AtapiPacketCommandIn (
- IdeDev,
- &Packet,
- (UINT16 *) &Data,
- sizeof (READ_CAPACITY_DATA),
- ATAPITIMEOUT
- );
-
- } else {
- //
- // Type == IdeMagnetic
- //
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Packet.ReadFormatCapacity.opcode = READ_FORMAT_CAPACITY;
- Packet.ReadFormatCapacity.allocation_length_lo = 12;
- Status = AtapiPacketCommandIn (
- IdeDev,
- &Packet,
- (UINT16 *) &FormatData,
- sizeof (READ_FORMAT_CAPACITY_DATA),
- ATAPITIMEOUT
- );
- }
-
- if (Status == EFI_TIMEOUT) {
- *SenseCount = 0;
- return Status;
- }
-
- SenseStatus = AtapiRequestSense (IdeDev, SenseCount);
-
- if (!EFI_ERROR (SenseStatus)) {
-
- if (!EFI_ERROR (Status)) {
-
- if (IdeDev->Type == IdeCdRom) {
-
- IdeDev->BlkIo.Media->LastBlock = (Data.LastLba3 << 24) |
- (Data.LastLba2 << 16) |
- (Data.LastLba1 << 8) |
- Data.LastLba0;
-
- if (IdeDev->BlkIo.Media->LastBlock != 0) {
-
- IdeDev->BlkIo.Media->BlockSize = (Data.BlockSize3 << 24) |
- (Data.BlockSize2 << 16) |
- (Data.BlockSize1 << 8) |
- Data.BlockSize0;
-
- IdeDev->BlkIo.Media->MediaPresent = TRUE;
- } else {
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
- return EFI_DEVICE_ERROR;
- }
-
- IdeDev->BlkIo.Media->ReadOnly = TRUE;
-
- //
- // Because the user data portion in the sector of the Data CD supported
- // is always 0x800
- //
- IdeDev->BlkIo.Media->BlockSize = 0x800;
- }
-
- if (IdeDev->Type == IdeMagnetic) {
-
- if (FormatData.DesCode == 3) {
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
- IdeDev->BlkIo.Media->LastBlock = 0;
- } else {
-
- IdeDev->BlkIo.Media->LastBlock = (FormatData.LastLba3 << 24) |
- (FormatData.LastLba2 << 16) |
- (FormatData.LastLba1 << 8) |
- FormatData.LastLba0;
- if (IdeDev->BlkIo.Media->LastBlock != 0) {
- IdeDev->BlkIo.Media->LastBlock--;
-
- IdeDev->BlkIo.Media->BlockSize = (FormatData.BlockSize2 << 16) |
- (FormatData.BlockSize1 << 8) |
- FormatData.BlockSize0;
-
- IdeDev->BlkIo.Media->MediaPresent = TRUE;
- } else {
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
- //
- // Return EFI_NOT_READY operation succeeds but returned capacity is 0
- //
- return EFI_NOT_READY;
- }
-
- IdeDev->BlkIo.Media->BlockSize = 0x200;
-
- }
- }
- }
-
- return EFI_SUCCESS;
-
- } else {
- *SenseCount = 0;
- return EFI_DEVICE_ERROR;
- }
-}
-
-/**
- Used before read/write blocks from/to ATAPI device media.
- Since ATAPI device media is removable, it is necessary to detect
- whether media is present and get current present media's
- information, and if media has been changed, Block I/O Protocol
- need to be reinstalled.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[out] *MediaChange
- return value that indicates if the media of the device has been
- changed.
-
- @retval EFI_SUCCESS
- media found successfully.
-
- @retval EFI_DEVICE_ERROR
- any error encounters during media detection.
-
- @retval EFI_NO_MEDIA
- media not found.
-
- @note
- parameter IdeDev may be updated in this function.
-
-**/
-EFI_STATUS
-AtapiDetectMedia (
- IN IDE_BLK_IO_DEV *IdeDev,
- OUT BOOLEAN *MediaChange
- )
-{
- EFI_STATUS Status;
- EFI_STATUS CleanStateStatus;
- EFI_BLOCK_IO_MEDIA OldMediaInfo;
- UINTN RetryTimes;
- UINTN RetryNotReady;
- UINTN SenseCount;
- SENSE_RESULT SResult;
- BOOLEAN WriteProtected;
-
- CopyMem (&OldMediaInfo, IdeDev->BlkIo.Media, sizeof (EFI_BLOCK_IO_MEDIA));
- *MediaChange = FALSE;
- //
- // Retry for SenseDeviceNotReadyNeedRetry.
- // Each retry takes 1s and we limit the upper boundary to
- // 120 times about 2 min.
- //
- RetryNotReady = 120;
-
- //
- // Do Test Unit Ready
- //
- DoTUR:
- //
- // Retry 5 times
- //
- RetryTimes = 5;
- while (RetryTimes != 0) {
-
- Status = AtapiTestUnitReady (IdeDev, &SenseCount);
-
- if (EFI_ERROR (Status)) {
- //
- // Test Unit Ready error without sense data.
- // For some devices, this means there's extra data
- // that has not been read, so we read these extra
- // data out before going on.
- //
- CleanStateStatus = AtapiReadPendingData (IdeDev);
- if (EFI_ERROR (CleanStateStatus)) {
- //
- // Busy wait failed, try again
- //
- RetryTimes--;
- }
- //
- // Try again without counting down RetryTimes
- //
- continue;
- } else {
-
- ParseSenseData (IdeDev, SenseCount, &SResult);
-
- switch (SResult) {
- case SenseNoSenseKey:
- if (IdeDev->BlkIo.Media->MediaPresent) {
- goto Done;
- } else {
- //
- // Media present but the internal structure need refreshed.
- // Try Read Capacity
- //
- goto DoRC;
- }
- break;
-
- case SenseDeviceNotReadyNeedRetry:
- if (--RetryNotReady == 0) {
- return EFI_DEVICE_ERROR;
- }
- gBS->Stall (1000 * STALL_1_MILLI_SECOND);
- continue;
- break;
-
- case SenseNoMedia:
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
- IdeDev->BlkIo.Media->LastBlock = 0;
- goto Done;
- break;
-
- case SenseDeviceNotReadyNoRetry:
- case SenseMediaError:
- return EFI_DEVICE_ERROR;
-
- case SenseMediaChange:
- IdeDev->BlkIo.Media->MediaId++;
- goto DoRC;
- break;
-
- default:
- RetryTimes--;
- break;
- }
- }
- }
-
- return EFI_DEVICE_ERROR;
-
- //
- // Do Read Capacity
- //
- DoRC:
- RetryTimes = 5;
-
- while (RetryTimes != 0) {
-
- Status = AtapiReadCapacity (IdeDev, &SenseCount);
-
- if (EFI_ERROR (Status)) {
- RetryTimes--;
- continue;
- } else {
-
- ParseSenseData (IdeDev, SenseCount, &SResult);
-
- switch (SResult) {
- case SenseNoSenseKey:
- goto Done;
- break;
-
- case SenseDeviceNotReadyNeedRetry:
- //
- // We use Test Unit Ready to retry which
- // is faster.
- //
- goto DoTUR;
- break;
-
- case SenseNoMedia:
- IdeDev->BlkIo.Media->MediaPresent = FALSE;
- IdeDev->BlkIo.Media->LastBlock = 0;
- goto Done;
- break;
-
- case SenseDeviceNotReadyNoRetry:
- case SenseMediaError:
- return EFI_DEVICE_ERROR;
-
- case SenseMediaChange:
- IdeDev->BlkIo.Media->MediaId++;
- continue;
- break;
-
- default:
- RetryTimes--;
- break;
- }
- }
- }
-
- return EFI_DEVICE_ERROR;
-
- Done:
- //
- // the following code is to check the write-protected for LS120 media
- //
- if ((IdeDev->BlkIo.Media->MediaPresent) && (IdeDev->Type == IdeMagnetic)) {
-
- Status = IsLS120orZipWriteProtected (IdeDev, &WriteProtected);
- if (!EFI_ERROR (Status)) {
-
- if (WriteProtected) {
-
- IdeDev->BlkIo.Media->ReadOnly = TRUE;
- } else {
-
- IdeDev->BlkIo.Media->ReadOnly = FALSE;
- }
-
- }
- }
-
- if (IdeDev->BlkIo.Media->MediaId != OldMediaInfo.MediaId) {
- //
- // Media change information got from the device
- //
- *MediaChange = TRUE;
- }
-
- if (IdeDev->BlkIo.Media->ReadOnly != OldMediaInfo.ReadOnly) {
- *MediaChange = TRUE;
- IdeDev->BlkIo.Media->MediaId += 1;
- }
-
- if (IdeDev->BlkIo.Media->BlockSize != OldMediaInfo.BlockSize) {
- *MediaChange = TRUE;
- IdeDev->BlkIo.Media->MediaId += 1;
- }
-
- if (IdeDev->BlkIo.Media->LastBlock != OldMediaInfo.LastBlock) {
- *MediaChange = TRUE;
- IdeDev->BlkIo.Media->MediaId += 1;
- }
-
- if (IdeDev->BlkIo.Media->MediaPresent != OldMediaInfo.MediaPresent) {
- if (IdeDev->BlkIo.Media->MediaPresent) {
- //
- // when change from no media to media present, reset the MediaId to 1.
- //
- IdeDev->BlkIo.Media->MediaId = 1;
- } else {
- //
- // when no media, reset the MediaId to zero.
- //
- IdeDev->BlkIo.Media->MediaId = 0;
- }
-
- *MediaChange = TRUE;
- }
-
- //
- // if any change on current existing media,
- // the Block I/O protocol need to be reinstalled.
- //
- if (*MediaChange) {
- gBS->ReinstallProtocolInterface (
- IdeDev->Handle,
- &gEfiBlockIoProtocolGuid,
- &IdeDev->BlkIo,
- &IdeDev->BlkIo
- );
- }
-
- if (IdeDev->BlkIo.Media->MediaPresent) {
- return EFI_SUCCESS;
- } else {
- return EFI_NO_MEDIA;
- }
-}
-
-/**
- This function is called by the AtapiBlkIoReadBlocks() to perform
- read from media in block unit.
-
- The main command used to access media here is READ(10) Command.
- READ(10) Command requests that the ATAPI device media transfer
- specified data to the host. Data is transferred in block(sector)
- unit. The maximum number of blocks that can be transferred once is
- 65536. This is the main difference between READ(10) and READ(12)
- Command. The maximum number of blocks in READ(12) is 2 power 32.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[in] *Buffer
- A pointer to the destination buffer for the data.
-
- @param[in] Lba
- The starting logical block address to read from
- on the device media.
-
- @param[in] NumberOfBlocks
- The number of transfer data blocks.
-
- @return status is fully dependent on the return status
- of AtapiPacketCommandIn() function.
-
-**/
-EFI_STATUS
-AtapiReadSectors (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN VOID *Buffer,
- IN EFI_LBA Lba,
- IN UINTN NumberOfBlocks
- )
-{
-
- ATAPI_PACKET_COMMAND Packet;
- READ10_CMD *Read10Packet;
- EFI_STATUS Status;
- UINTN BlocksRemaining;
- UINT32 Lba32;
- UINT32 BlockSize;
- UINT32 ByteCount;
- UINT16 SectorCount;
- VOID *PtrBuffer;
- UINT16 MaxBlock;
- UINTN TimeOut;
-
- //
- // fill command packet for Read(10) command
- //
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Read10Packet = &Packet.Read10;
- Lba32 = (UINT32) Lba;
- PtrBuffer = Buffer;
-
- BlockSize = IdeDev->BlkIo.Media->BlockSize;
-
- //
- // limit the data bytes that can be transferred by one Read(10) Command
- //
- MaxBlock = 65535;
-
- BlocksRemaining = NumberOfBlocks;
-
- Status = EFI_SUCCESS;
- while (BlocksRemaining > 0) {
-
- if (BlocksRemaining <= MaxBlock) {
-
- SectorCount = (UINT16) BlocksRemaining;
- } else {
-
- SectorCount = MaxBlock;
- }
-
- //
- // fill the Packet data structure
- //
-
- Read10Packet->opcode = READ_10;
-
- //
- // Lba0 ~ Lba3 specify the start logical block address of the data transfer.
- // Lba0 is MSB, Lba3 is LSB
- //
- Read10Packet->Lba3 = (UINT8) (Lba32 & 0xff);
- Read10Packet->Lba2 = (UINT8) (Lba32 >> 8);
- Read10Packet->Lba1 = (UINT8) (Lba32 >> 16);
- Read10Packet->Lba0 = (UINT8) (Lba32 >> 24);
-
- //
- // TranLen0 ~ TranLen1 specify the transfer length in block unit.
- // TranLen0 is MSB, TranLen is LSB
- //
- Read10Packet->TranLen1 = (UINT8) (SectorCount & 0xff);
- Read10Packet->TranLen0 = (UINT8) (SectorCount >> 8);
-
- ByteCount = SectorCount * BlockSize;
-
- if (IdeDev->Type == IdeCdRom) {
- TimeOut = CDROMLONGTIMEOUT;
- } else {
- TimeOut = ATAPILONGTIMEOUT;
- }
-
- Status = AtapiPacketCommandIn (
- IdeDev,
- &Packet,
- (UINT16 *) PtrBuffer,
- ByteCount,
- TimeOut
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Lba32 += SectorCount;
- PtrBuffer = (UINT8 *) PtrBuffer + SectorCount * BlockSize;
- BlocksRemaining -= SectorCount;
- }
-
- return Status;
-}
-
-/**
- This function is called by the AtapiBlkIoWriteBlocks() to perform
- write onto media in block unit.
- The main command used to access media here is Write(10) Command.
- Write(10) Command requests that the ATAPI device media transfer
- specified data to the host. Data is transferred in block (sector)
- unit. The maximum number of blocks that can be transferred once is
- 65536.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @param[in] *Buffer
- A pointer to the source buffer for the data.
-
- @param[in] Lba
- The starting logical block address to write onto
- the device media.
-
- @param[in] NumberOfBlocks
- The number of transfer data blocks.
-
- @return status is fully dependent on the return status
- of AtapiPacketCommandOut() function.
-
-**/
-EFI_STATUS
-AtapiWriteSectors (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN VOID *Buffer,
- IN EFI_LBA Lba,
- IN UINTN NumberOfBlocks
- )
-{
-
- ATAPI_PACKET_COMMAND Packet;
- READ10_CMD *Read10Packet;
-
- EFI_STATUS Status;
- UINTN BlocksRemaining;
- UINT32 Lba32;
- UINT32 BlockSize;
- UINT32 ByteCount;
- UINT16 SectorCount;
- VOID *PtrBuffer;
- UINT16 MaxBlock;
-
- //
- // fill command packet for Write(10) command
- // Write(10) command packet has the same data structure as
- // Read(10) command packet,
- // so here use the Read10Packet data structure
- // for the Write(10) command packet.
- //
- ZeroMem (&Packet, sizeof (ATAPI_PACKET_COMMAND));
- Read10Packet = &Packet.Read10;
-
- Lba32 = (UINT32) Lba;
- PtrBuffer = Buffer;
-
- BlockSize = IdeDev->BlkIo.Media->BlockSize;
-
- //
- // limit the data bytes that can be transferred by one Read(10) Command
- //
- MaxBlock = (UINT16) (65536 / BlockSize);
-
- BlocksRemaining = NumberOfBlocks;
-
- Status = EFI_SUCCESS;
- while (BlocksRemaining > 0) {
-
- if (BlocksRemaining >= MaxBlock) {
- SectorCount = MaxBlock;
- } else {
- SectorCount = (UINT16) BlocksRemaining;
- }
-
- //
- // Command code is WRITE_10.
- //
- Read10Packet->opcode = WRITE_10;
-
- //
- // Lba0 ~ Lba3 specify the start logical block address of the data transfer.
- // Lba0 is MSB, Lba3 is LSB
- //
- Read10Packet->Lba3 = (UINT8) (Lba32 & 0xff);
- Read10Packet->Lba2 = (UINT8) (Lba32 >> 8);
- Read10Packet->Lba1 = (UINT8) (Lba32 >> 16);
- Read10Packet->Lba0 = (UINT8) (Lba32 >> 24);
-
- //
- // TranLen0 ~ TranLen1 specify the transfer length in block unit.
- // TranLen0 is MSB, TranLen is LSB
- //
- Read10Packet->TranLen1 = (UINT8) (SectorCount & 0xff);
- Read10Packet->TranLen0 = (UINT8) (SectorCount >> 8);
-
- ByteCount = SectorCount * BlockSize;
-
- Status = AtapiPacketCommandOut (
- IdeDev,
- &Packet,
- (UINT16 *) PtrBuffer,
- ByteCount,
- ATAPILONGTIMEOUT
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Lba32 += SectorCount;
- PtrBuffer = ((UINT8 *) PtrBuffer + SectorCount * BlockSize);
- BlocksRemaining -= SectorCount;
- }
-
- return Status;
-}
-
-/**
- This function is used to implement the Soft Reset on the specified
- ATAPI device. Different from the AtaSoftReset(), here reset is a ATA
- Soft Reset Command special for ATAPI device, and it only take effects
- on the specified ATAPI device, not on the whole IDE bus.
- Since the ATAPI soft reset is needed when device is in exceptional
- condition (such as BSY bit is always set ), I think the Soft Reset
- command should be sent without waiting for the BSY clear and DRDY
- set.
- This function is called by IdeBlkIoReset(),
- a interface function of Block I/O protocol.
-
- @param[in] *IdeDev
- pointer pointing to IDE_BLK_IO_DEV data structure, used
- to record all the information of the IDE device.
-
- @retval EFI_SUCCESS
- Soft reset completes successfully.
-
- @retval EFI_DEVICE_ERROR
- Any step during the reset process is failed.
-
-**/
-EFI_STATUS
-AtapiSoftReset (
- IN IDE_BLK_IO_DEV *IdeDev
- )
-{
- UINT8 Command;
- UINT8 DeviceSelect;
- EFI_STATUS Status;
-
- //
- // for ATAPI device, no need to wait DRDY ready after device selecting.
- // (bit7 and bit5 are both set to 1 for backward compatibility)
- //
- DeviceSelect = (UINT8) (((bit7 | bit5) | (IdeDev->Device << 4)));
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, DeviceSelect);
-
- Command = ATAPI_SOFT_RESET_CMD;
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, Command);
-
- //
- // BSY cleared is the only status return to the host by the device
- // when reset is completed.
- // slave device needs at most 31s to clear BSY
- //
- Status = WaitForBSYClear (IdeDev, 31000);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // stall 5 seconds to make the device status stable
- //
- gBS->Stall (5000000);
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is the ATAPI implementation for ReadBlocks in the
- Block I/O Protocol interface.
-
- @param[in] *IdeBlkIoDev
- Indicates the calling context.
-
- @param[in] MediaId
- The media id that the read request is for.
-
- @param[in] LBA
- The starting logical block address to read from
- on the device.
-
- @param[in] BufferSize
- The size of the Buffer in bytes. This must be a
- multiple of the intrinsic block size of the device.
-
- @param[out] *Buffer
- A pointer to the destination buffer for the data.
- The caller is responsible for either having implicit
- or explicit ownership of the memory that data is read into.
-
- @retval EFI_SUCCESS
- Read Blocks successfully.
-
- @retval EFI_DEVICE_ERROR
- Read Blocks failed.
-
- @retval EFI_NO_MEDIA
- There is no media in the device.
-
- @retval EFI_MEDIA_CHANGED
- The MediaId is not for the current media.
-
- @retval EFI_BAD_BUFFER_SIZE
- The BufferSize parameter is not a multiple of the
- intrinsic block size of the device.
-
- @retval EFI_INVALID_PARAMETER
- The read request contains LBAs that are not valid,
- or the data buffer is not valid.
-
-**/
-EFI_STATUS
-AtapiBlkIoReadBlocks (
- IN IDE_BLK_IO_DEV *IdeBlkIoDevice,
- IN UINT32 MediaId,
- IN EFI_LBA LBA,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
- EFI_BLOCK_IO_MEDIA *Media;
- UINTN BlockSize;
- UINTN NumberOfBlocks;
- EFI_STATUS Status;
-
- BOOLEAN MediaChange;
-
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (BufferSize == 0) {
- return EFI_SUCCESS;
- }
-
- //
- // ATAPI device media is removable, so it is a must
- // to detect media first before read operation
- //
- MediaChange = FALSE;
- Status = AtapiDetectMedia (IdeBlkIoDevice, &MediaChange);
- if (EFI_ERROR (Status)) {
-
- if (IdeBlkIoDevice->Cache != NULL) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
-
- return Status;
- }
- //
- // Get the intrinsic block size
- //
- Media = IdeBlkIoDevice->BlkIo.Media;
- BlockSize = Media->BlockSize;
-
- NumberOfBlocks = BufferSize / BlockSize;
-
- if (!(Media->MediaPresent)) {
-
- if (IdeBlkIoDevice->Cache != NULL) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
- return EFI_NO_MEDIA;
-
- }
-
- if ((MediaId != Media->MediaId) || MediaChange) {
-
- if (IdeBlkIoDevice->Cache != NULL) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
- return EFI_MEDIA_CHANGED;
- }
-
- if (BufferSize % BlockSize != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- if (LBA > Media->LastBlock) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((Media->IoAlign > 1) && (((UINTN) Buffer & (Media->IoAlign - 1)) != 0)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // if all the parameters are valid, then perform read sectors command
- // to transfer data from device to host.
- //
- Status = AtapiReadSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Read blocks succeeded
- //
-
- //
- // save the first block to the cache for performance
- //
- if (LBA == 0 && !IdeBlkIoDevice->Cache) {
- IdeBlkIoDevice->Cache = AllocatePool (BlockSize);
- if (IdeBlkIoDevice != NULL) {
- CopyMem ((UINT8 *) IdeBlkIoDevice->Cache, (UINT8 *) Buffer, BlockSize);
- }
- }
-
- return EFI_SUCCESS;
-
-}
-
-/**
- This function is the ATAPI implementation for WriteBlocks in the
- Block I/O Protocol interface.
-
- @param[in] *This
- Indicates the calling context.
-
- @param[in] MediaId
- The media id that the write request is for.
-
- @param[in] LBA
- The starting logical block address to write onto
- the device.
-
- @param[in] BufferSize
- The size of the Buffer in bytes. This must be a
- multiple of the intrinsic block size of the device.
-
- @param[out] *Buffer
- A pointer to the source buffer for the data.
- The caller is responsible for either having implicit
- or explicit ownership of the memory that data is
- written from.
-
- @retval EFI_SUCCESS
- Write Blocks successfully.
-
- @retval EFI_DEVICE_ERROR
- Write Blocks failed.
-
- @retval EFI_NO_MEDIA
- There is no media in the device.
-
- @retval EFI_MEDIA_CHANGE
- The MediaId is not for the current media.
-
- @retval EFI_BAD_BUFFER_SIZE
- The BufferSize parameter is not a multiple of the
- intrinsic block size of the device.
-
- @retval EFI_INVALID_PARAMETER
- The write request contains LBAs that are not valid,
- or the data buffer is not valid.
-
- TODO: EFI_MEDIA_CHANGED - add return value to function comment
- TODO: EFI_WRITE_PROTECTED - add return value to function comment
-**/
-EFI_STATUS
-AtapiBlkIoWriteBlocks (
- IN IDE_BLK_IO_DEV *IdeBlkIoDevice,
- IN UINT32 MediaId,
- IN EFI_LBA LBA,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
-
- EFI_BLOCK_IO_MEDIA *Media;
- UINTN BlockSize;
- UINTN NumberOfBlocks;
- EFI_STATUS Status;
- BOOLEAN MediaChange;
-
- if (LBA == 0 && IdeBlkIoDevice->Cache) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
-
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (BufferSize == 0) {
- return EFI_SUCCESS;
- }
-
- //
- // ATAPI device media is removable,
- // so it is a must to detect media first before write operation
- //
- MediaChange = FALSE;
- Status = AtapiDetectMedia (IdeBlkIoDevice, &MediaChange);
- if (EFI_ERROR (Status)) {
-
- if (LBA == 0 && IdeBlkIoDevice->Cache) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
- return Status;
- }
-
- //
- // Get the intrinsic block size
- //
- Media = IdeBlkIoDevice->BlkIo.Media;
- BlockSize = Media->BlockSize;
- NumberOfBlocks = BufferSize / BlockSize;
-
- if (!(Media->MediaPresent)) {
-
- if (LBA == 0 && IdeBlkIoDevice->Cache) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
- return EFI_NO_MEDIA;
- }
-
- if ((MediaId != Media->MediaId) || MediaChange) {
-
- if (LBA == 0 && IdeBlkIoDevice->Cache) {
- gBS->FreePool (IdeBlkIoDevice->Cache);
- IdeBlkIoDevice->Cache = NULL;
- }
- return EFI_MEDIA_CHANGED;
- }
-
- if (Media->ReadOnly) {
- return EFI_WRITE_PROTECTED;
- }
-
- if (BufferSize % BlockSize != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- if (LBA > Media->LastBlock) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((Media->IoAlign > 1) && (((UINTN) Buffer & (Media->IoAlign - 1)) != 0)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // if all the parameters are valid,
- // then perform write sectors command to transfer data from host to device.
- //
- Status = AtapiWriteSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-
-}
-
-/**
- This function is used to parse sense data. Only the first
- sense data is honoured.
-
- @param[in] IdeDev Indicates the calling context.
- @param[in] SenseCount Count of sense data.
- @param[out] Result The parsed result.
-
- @retval EFI_SUCCESS Successfully parsed.
- @retval EFI_INVALID_PARAMETER Count of sense data is zero.
-
-**/
-EFI_STATUS
-ParseSenseData (
- IN IDE_BLK_IO_DEV *IdeDev,
- IN UINTN SenseCount,
- OUT SENSE_RESULT *Result
- )
-{
- REQUEST_SENSE_DATA *SenseData;
-
- if (SenseCount == 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Only use the first sense data
- //
- SenseData = IdeDev->SenseData;
- *Result = SenseOtherSense;
-
- switch (SenseData->sense_key) {
- case SK_NO_SENSE:
- *Result = SenseNoSenseKey;
- break;
- case SK_NOT_READY:
- switch (SenseData->addnl_sense_code) {
- case ASC_NO_MEDIA:
- *Result = SenseNoMedia;
- break;
- case ASC_MEDIA_UPSIDE_DOWN:
- *Result = SenseMediaError;
- break;
- case ASC_NOT_READY:
- if (SenseData->addnl_sense_code_qualifier == ASCQ_IN_PROGRESS) {
- *Result = SenseDeviceNotReadyNeedRetry;
- } else {
- *Result = SenseDeviceNotReadyNoRetry;
- }
- break;
- }
- break;
- case SK_UNIT_ATTENTION:
- if (SenseData->addnl_sense_code == ASC_MEDIA_CHANGE) {
- *Result = SenseMediaChange;
- }
- break;
- case SK_MEDIUM_ERROR:
- switch (SenseData->addnl_sense_code) {
- case ASC_MEDIA_ERR1:
- case ASC_MEDIA_ERR2:
- case ASC_MEDIA_ERR3:
- case ASC_MEDIA_ERR4:
- *Result = SenseMediaError;
- break;
- }
- break;
- default:
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- This function reads the pending data in the device.
-
- @param[in] IdeDev Indicates the calling context.
-
- @retval EFI_SUCCESS Successfully read.
- @retval EFI_NOT_READY The BSY is set avoiding reading.
-
-**/
-EFI_STATUS
-AtapiReadPendingData (
- IN IDE_BLK_IO_DEV *IdeDev
- )
-{
- UINT8 AltRegister;
- UINT16 TempWordBuffer;
-
- AltRegister = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Alt.AltStatus);
- if ((AltRegister & BSY) == BSY) {
- return EFI_NOT_READY;
- }
- if ((AltRegister & (BSY | DRQ)) == DRQ) {
- TempWordBuffer = IDEReadPortB (IdeDev->PciIo,IdeDev->IoPort->Alt.AltStatus);
- while ((TempWordBuffer & (BSY | DRQ)) == DRQ) {
- IDEReadPortWMultiple (
- IdeDev->PciIo,
- IdeDev->IoPort->Data,
- 1,
- &TempWordBuffer
- );
- TempWordBuffer = IDEReadPortB (IdeDev->PciIo,IdeDev->IoPort->Alt.AltStatus);
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- TODO: Add function description
-
- @param IdeDev TODO: add argument description
- @param WriteProtected TODO: add argument description
-
- @retval EFI_DEVICE_ERROR TODO: Add description for return value
- @retval EFI_DEVICE_ERROR TODO: Add description for return value
- @retval EFI_SUCCESS TODO: Add description for return value
-
-**/
-EFI_STATUS
-IsLS120orZipWriteProtected (
- IN IDE_BLK_IO_DEV *IdeDev,
- OUT BOOLEAN *WriteProtected
- )
-{
- EFI_STATUS Status;
-
- *WriteProtected = FALSE;
-
- Status = LS120EnableMediaStatus (IdeDev, TRUE);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // the Get Media Status Command is only valid
- // if a Set Features/Enable Media Status Command has been priviously issued.
- //
- if (LS120GetMediaStatus (IdeDev) == EFI_WRITE_PROTECTED) {
-
- *WriteProtected = TRUE;
- } else {
-
- *WriteProtected = FALSE;
- }
-
- //
- // After Get Media Status Command completes,
- // Set Features/Disable Media Command should be sent.
- //
- Status = LS120EnableMediaStatus (IdeDev, FALSE);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
|