diff options
author | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
---|---|---|
committer | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
commit | 808def96aa4589fba9c2d0ea55837754a3b7a4f7 (patch) | |
tree | 0ea221c59abb2474c694e7ab5bd61006be77e47e /EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/Decode.c | |
parent | 9216450d1143056a50a5f916984a2d7faf590488 (diff) | |
download | edk2-platforms-808def96aa4589fba9c2d0ea55837754a3b7a4f7.tar.xz |
Retiring the ANT/JAVA build and removing the older EDK II packages that required ANT/JAVA.
Last Ant/Java build was r7166
Developers requiring the Java/Ant packages should checkout the branch from:
https://edk2.tianocore.org/svn/edk2/branches/AntJava
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7168 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/Decode.c')
-rw-r--r-- | EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/Decode.c | 1647 |
1 files changed, 0 insertions, 1647 deletions
diff --git a/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/Decode.c b/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/Decode.c deleted file mode 100644 index cb7fa89749..0000000000 --- a/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/Decode.c +++ /dev/null @@ -1,1647 +0,0 @@ -/*++
-
-Copyright (c) 2006 - 2007, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module name:
- decode.c
-
-Abstract:
-
-Revision history:
-
---*/
-
-// TODO: fix comment to add: Module Name: DECODE.C
-#include "Undi32.h"
-
-//
-// Global variables defined in this file
-//
-UNDI_CALL_TABLE api_table[PXE_OPCODE_LAST_VALID+1] = { \
- {PXE_CPBSIZE_NOT_USED,PXE_DBSIZE_NOT_USED,0, (UINT16)(ANY_STATE),UNDI_GetState },\
- {(UINT16)(DONT_CHECK),PXE_DBSIZE_NOT_USED,0,(UINT16)(ANY_STATE),UNDI_Start },\
- {PXE_CPBSIZE_NOT_USED,PXE_DBSIZE_NOT_USED,0,MUST_BE_STARTED,UNDI_Stop },\
- {PXE_CPBSIZE_NOT_USED,sizeof(PXE_DB_GET_INIT_INFO),0,MUST_BE_STARTED, UNDI_GetInitInfo },\
- {PXE_CPBSIZE_NOT_USED,sizeof(PXE_DB_GET_CONFIG_INFO),0,MUST_BE_STARTED, UNDI_GetConfigInfo },\
- {sizeof(PXE_CPB_INITIALIZE),(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK),MUST_BE_STARTED,UNDI_Initialize },\
- {PXE_CPBSIZE_NOT_USED,PXE_DBSIZE_NOT_USED,(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED,UNDI_Reset },\
- {PXE_CPBSIZE_NOT_USED,PXE_DBSIZE_NOT_USED,0, MUST_BE_INITIALIZED,UNDI_Shutdown },\
- {PXE_CPBSIZE_NOT_USED,PXE_DBSIZE_NOT_USED,(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED,UNDI_Interrupt },\
- {(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_RecFilter },\
- {(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_StnAddr },\
- {PXE_CPBSIZE_NOT_USED, (UINT16)(DONT_CHECK), (UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_Statistics },\
- {sizeof(PXE_CPB_MCAST_IP_TO_MAC),sizeof(PXE_DB_MCAST_IP_TO_MAC), (UINT16)(DONT_CHECK),MUST_BE_INITIALIZED, UNDI_ip2mac },\
- {(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_NVData },\
- {PXE_CPBSIZE_NOT_USED,(UINT16)(DONT_CHECK),(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_Status },\
- {(UINT16)(DONT_CHECK),PXE_DBSIZE_NOT_USED,(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_FillHeader },\
- {(UINT16)(DONT_CHECK),PXE_DBSIZE_NOT_USED,(UINT16)(DONT_CHECK), MUST_BE_INITIALIZED, UNDI_Transmit },\
- {sizeof(PXE_CPB_RECEIVE),sizeof(PXE_DB_RECEIVE),0,MUST_BE_INITIALIZED, UNDI_Receive } \
-};
-
-//
-// end of global variables
-//
-
-VOID
-UNDI_GetState (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine determines the operational state of the UNDI. It updates the state flags in the
- Command Descriptor Block based on information derived from the AdapterInfo instance data.
-
- To ensure the command has completed successfully, CdbPtr->StatCode will contain the result of
- the command execution.
-
- The CdbPtr->StatFlags will contain a STOPPED, STARTED, or INITIALIZED state once the command
- has successfully completed.
-
- Keep in mind the AdapterInfo->State is the active state of the adapter (based on software
- interrogation), and the CdbPtr->StateFlags is the passed back information that is reflected
- to the caller of the UNDI API.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- CdbPtr->StatFlags = (PXE_STATFLAGS) (CdbPtr->StatFlags | AdapterInfo->State);
- return ;
-}
-
-VOID
-UNDI_Start (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to change the operational state of the UNDI from stopped to started.
- It will do this as long as the adapter's state is PXE_STATFLAGS_GET_STATE_STOPPED, otherwise
- the CdbPtr->StatFlags will reflect a command failure, and the CdbPtr->StatCode will reflect the
- UNDI as having already been started.
-
- This routine is modified to reflect the undi 1.1 specification changes. The
- changes in the spec are mainly in the callback routines, the new spec adds
- 3 more callbacks and a unique id.
- Since this UNDI supports both old and new undi specifications,
- The NIC's data structure is filled in with the callback routines (depending
- on the version) pointed to in the caller's CpbPtr. This seeds the Delay,
- Virt2Phys, Block, and Mem_IO for old and new versions and Map_Mem, UnMap_Mem
- and Sync_Mem routines and a unique id variable for the new version.
- This is the function which an external entity (SNP, O/S, etc) would call
- to provide it's I/O abstraction to the UNDI.
-
- It's final action is to change the AdapterInfo->State to PXE_STATFLAGS_GET_STATE_STARTED.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_CPB_START_30 *CpbPtr;
- PXE_CPB_START_31 *CpbPtr_31;
-
- //
- // check if it is already started.
- //
- if (AdapterInfo->State != PXE_STATFLAGS_GET_STATE_STOPPED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_ALREADY_STARTED;
- return ;
- }
-
- if (CdbPtr->CPBsize != sizeof(PXE_CPB_START_30) &&
- CdbPtr->CPBsize != sizeof(PXE_CPB_START_31)) {
-
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- CpbPtr = (PXE_CPB_START_30 *) (UINTN) (CdbPtr->CPBaddr);
- CpbPtr_31 = (PXE_CPB_START_31 *) (UINTN) (CdbPtr->CPBaddr);
-
- if (AdapterInfo->VersionFlag == 0x30) {
- AdapterInfo->Delay_30 = (bsptr_30) (UINTN) CpbPtr->Delay;
- AdapterInfo->Virt2Phys_30 = (virtphys_30) (UINTN) CpbPtr->Virt2Phys;
- AdapterInfo->Block_30 = (block_30) (UINTN) CpbPtr->Block;
- //
- // patch for old buggy 3.0 code:
- // In EFI1.0 undi used to provide the full (absolute) I/O address to the
- // i/o calls and SNP used to provide a callback that used GlobalIoFncs and
- // everything worked fine! In EFI 1.1, UNDI is not using the full
- // i/o or memory address to access the device, The base values for the i/o
- // and memory address is abstracted by the device specific PciIoFncs and
- // UNDI only uses the offset values. Since UNDI3.0 cannot provide any
- // identification to SNP, SNP cannot use nic specific PciIoFncs callback!
- //
- // To fix this and make undi3.0 work with SNP in EFI1.1 we
- // use a TmpMemIo function that is defined in init.c
- // This breaks the runtime driver feature of undi, but what to do
- // if we have to provide the 3.0 compatibility (including the 3.0 bugs)
- //
- // This TmpMemIo function also takes a UniqueId parameter
- // (as in undi3.1 design) and so initialize the UniqueId as well here
- // Note: AdapterInfo->Mem_Io_30 is just filled for consistency with other
- // parameters but never used, we only use Mem_Io field in the In/Out routines
- // inside e100b.c.
- //
- AdapterInfo->Mem_Io_30 = (mem_io_30) (UINTN) CpbPtr->Mem_IO;
- AdapterInfo->Mem_Io = (mem_io) (UINTN) TmpMemIo;
- AdapterInfo->Unique_ID = (UINT64) (UINTN) AdapterInfo;
-
- } else {
- AdapterInfo->Delay = (bsptr) (UINTN) CpbPtr_31->Delay;
- AdapterInfo->Virt2Phys = (virtphys) (UINTN) CpbPtr_31->Virt2Phys;
- AdapterInfo->Block = (block) (UINTN) CpbPtr_31->Block;
- AdapterInfo->Mem_Io = (mem_io) (UINTN) CpbPtr_31->Mem_IO;
-
- AdapterInfo->Map_Mem = (map_mem) (UINTN) CpbPtr_31->Map_Mem;
- AdapterInfo->UnMap_Mem = (unmap_mem) (UINTN) CpbPtr_31->UnMap_Mem;
- AdapterInfo->Sync_Mem = (sync_mem) (UINTN) CpbPtr_31->Sync_Mem;
- AdapterInfo->Unique_ID = CpbPtr_31->Unique_ID;
- }
-
- AdapterInfo->State = PXE_STATFLAGS_GET_STATE_STARTED;
-
- return ;
-}
-
-VOID
-UNDI_Stop (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to change the operational state of the UNDI from started to stopped.
- It will not do this if the adapter's state is PXE_STATFLAGS_GET_STATE_INITIALIZED, otherwise
- the CdbPtr->StatFlags will reflect a command failure, and the CdbPtr->StatCode will reflect the
- UNDI as having already not been shut down.
-
- The NIC's data structure will have the Delay, Virt2Phys, and Block, pointers zero'd out..
-
- It's final action is to change the AdapterInfo->State to PXE_STATFLAGS_GET_STATE_STOPPED.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- if (AdapterInfo->State == PXE_STATFLAGS_GET_STATE_INITIALIZED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_NOT_SHUTDOWN;
- return ;
- }
-
- AdapterInfo->Delay_30 = 0;
- AdapterInfo->Virt2Phys_30 = 0;
- AdapterInfo->Block_30 = 0;
-
- AdapterInfo->Delay = 0;
- AdapterInfo->Virt2Phys = 0;
- AdapterInfo->Block = 0;
-
- AdapterInfo->Map_Mem = 0;
- AdapterInfo->UnMap_Mem = 0;
- AdapterInfo->Sync_Mem = 0;
-
- AdapterInfo->State = PXE_STATFLAGS_GET_STATE_STOPPED;
-
- return ;
-}
-
-VOID
-UNDI_GetInitInfo (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to retrieve the initialization information that is needed by drivers and
- applications to initialize the UNDI. This will fill in data in the Data Block structure that is
- pointed to by the caller's CdbPtr->DBaddr. The fields filled in are as follows:
-
- MemoryRequired, FrameDataLen, LinkSpeeds[0-3], NvCount, NvWidth, MediaHeaderLen, HWaddrLen,
- MCastFilterCnt, TxBufCnt, TxBufSize, RxBufCnt, RxBufSize, IFtype, Duplex, and LoopBack.
-
- In addition, the CdbPtr->StatFlags ORs in that this NIC supports cable detection. (APRIORI knowledge)
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_DB_GET_INIT_INFO *DbPtr;
-
- DbPtr = (PXE_DB_GET_INIT_INFO *) (UINTN) (CdbPtr->DBaddr);
-
- DbPtr->MemoryRequired = MEMORY_NEEDED;
- DbPtr->FrameDataLen = PXE_MAX_TXRX_UNIT_ETHER;
- DbPtr->LinkSpeeds[0] = 10;
- DbPtr->LinkSpeeds[1] = 100;
- DbPtr->LinkSpeeds[2] = DbPtr->LinkSpeeds[3] = 0;
- DbPtr->NvCount = MAX_EEPROM_LEN;
- DbPtr->NvWidth = 4;
- DbPtr->MediaHeaderLen = PXE_MAC_HEADER_LEN_ETHER;
- DbPtr->HWaddrLen = PXE_HWADDR_LEN_ETHER;
- DbPtr->MCastFilterCnt = MAX_MCAST_ADDRESS_CNT;
-
- DbPtr->TxBufCnt = TX_BUFFER_COUNT;
- DbPtr->TxBufSize = sizeof (TxCB);
- DbPtr->RxBufCnt = RX_BUFFER_COUNT;
- DbPtr->RxBufSize = sizeof (RxFD);
-
- DbPtr->IFtype = PXE_IFTYPE_ETHERNET;
- DbPtr->SupportedDuplexModes = PXE_DUPLEX_ENABLE_FULL_SUPPORTED |
- PXE_DUPLEX_FORCE_FULL_SUPPORTED;
- DbPtr->SupportedLoopBackModes = PXE_LOOPBACK_INTERNAL_SUPPORTED |
- PXE_LOOPBACK_EXTERNAL_SUPPORTED;
-
- CdbPtr->StatFlags |= PXE_STATFLAGS_CABLE_DETECT_SUPPORTED;
- return ;
-}
-
-VOID
-UNDI_GetConfigInfo (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to retrieve the configuration information about the NIC being controlled by
- this driver. This will fill in data in the Data Block structure that is pointed to by the caller's CdbPtr->DBaddr.
- The fields filled in are as follows:
-
- DbPtr->pci.BusType, DbPtr->pci.Bus, DbPtr->pci.Device, and DbPtr->pci.
-
- In addition, the DbPtr->pci.Config.Dword[0-63] grabs a copy of this NIC's PCI configuration space.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- UINT16 Index;
- PXE_DB_GET_CONFIG_INFO *DbPtr;
-
- DbPtr = (PXE_DB_GET_CONFIG_INFO *) (UINTN) (CdbPtr->DBaddr);
-
- DbPtr->pci.BusType = PXE_BUSTYPE_PCI;
- DbPtr->pci.Bus = AdapterInfo->Bus;
- DbPtr->pci.Device = AdapterInfo->Device;
- DbPtr->pci.Function = AdapterInfo->Function;
-
- for (Index = 0; Index < MAX_PCI_CONFIG_LEN; Index++) {
- DbPtr->pci.Config.Dword[Index] = AdapterInfo->Config[Index];
- }
-
- return ;
-}
-
-VOID
-UNDI_Initialize (
- IN PXE_CDB *CdbPtr,
- NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine resets the network adapter and initializes the UNDI using the parameters supplied in
- the CPB. This command must be issued before the network adapter can be setup to transmit and
- receive packets.
-
- Once the memory requirements of the UNDI are obtained by using the GetInitInfo command, a block
- of non-swappable memory may need to be allocated. The address of this memory must be passed to
- UNDI during the Initialize in the CPB. This memory is used primarily for transmit and receive buffers.
-
- The fields CableDetect, LinkSpeed, Duplex, LoopBack, MemoryPtr, and MemoryLength are set with information
- that was passed in the CPB and the NIC is initialized.
-
- If the NIC initialization fails, the CdbPtr->StatFlags are updated with PXE_STATFLAGS_COMMAND_FAILED
- Otherwise, AdapterInfo->State is updated with PXE_STATFLAGS_GET_STATE_INITIALIZED showing the state of
- the UNDI is now initialized.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_CPB_INITIALIZE *CpbPtr;
-
- if ((CdbPtr->OpFlags != PXE_OPFLAGS_INITIALIZE_DETECT_CABLE) &&
- (CdbPtr->OpFlags != PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE)) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- //
- // check if it is already initialized
- //
- if (AdapterInfo->State == PXE_STATFLAGS_GET_STATE_INITIALIZED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_ALREADY_INITIALIZED;
- return ;
- }
-
- CpbPtr = (PXE_CPB_INITIALIZE *) (UINTN) CdbPtr->CPBaddr;
-
- if (CpbPtr->MemoryLength < (UINT32) MEMORY_NEEDED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CPB;
- return ;
- }
-
- //
- // default behaviour is to detect the cable, if the 3rd param is 1,
- // do not do that
- //
- AdapterInfo->CableDetect = (UINT8) ((CdbPtr->OpFlags == (UINT16) PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE) ? (UINT8) 0 : (UINT8) 1);
- AdapterInfo->LinkSpeedReq = (UINT16) CpbPtr->LinkSpeed;
- AdapterInfo->DuplexReq = CpbPtr->DuplexMode;
- AdapterInfo->LoopBack = CpbPtr->LoopBackMode;
- AdapterInfo->MemoryPtr = CpbPtr->MemoryAddr;
- AdapterInfo->MemoryLength = CpbPtr->MemoryLength;
-
- CdbPtr->StatCode = (PXE_STATCODE) E100bInit (AdapterInfo);
-
- if (CdbPtr->StatCode != PXE_STATCODE_SUCCESS) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- } else {
- AdapterInfo->State = PXE_STATFLAGS_GET_STATE_INITIALIZED;
- }
-
- return ;
-}
-
-VOID
-UNDI_Reset (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine resets the network adapter and initializes the UNDI using the parameters supplied in
- the CPB. The transmit and receive queues are emptied and any pending interrupts are cleared.
-
- If the NIC reset fails, the CdbPtr->StatFlags are updated with PXE_STATFLAGS_COMMAND_FAILED
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- if (CdbPtr->OpFlags != PXE_OPFLAGS_NOT_USED &&
- CdbPtr->OpFlags != PXE_OPFLAGS_RESET_DISABLE_INTERRUPTS &&
- CdbPtr->OpFlags != PXE_OPFLAGS_RESET_DISABLE_FILTERS ) {
-
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- CdbPtr->StatCode = (UINT16) E100bReset (AdapterInfo, CdbPtr->OpFlags);
-
- if (CdbPtr->StatCode != PXE_STATCODE_SUCCESS) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- }
-}
-
-VOID
-UNDI_Shutdown (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine resets the network adapter and leaves it in a safe state for another driver to
- initialize. Any pending transmits or receives are lost. Receive filters and external
- interrupt enables are disabled. Once the UNDI has been shutdown, it can then be stopped
- or initialized again.
-
- If the NIC reset fails, the CdbPtr->StatFlags are updated with PXE_STATFLAGS_COMMAND_FAILED
-
- Otherwise, AdapterInfo->State is updated with PXE_STATFLAGS_GET_STATE_STARTED showing the state of
- the NIC as being started.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- //
- // do the shutdown stuff here
- //
- CdbPtr->StatCode = (UINT16) E100bShutdown (AdapterInfo);
-
- if (CdbPtr->StatCode != PXE_STATCODE_SUCCESS) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- } else {
- AdapterInfo->State = PXE_STATFLAGS_GET_STATE_STARTED;
- }
-
- return ;
-}
-
-VOID
-UNDI_Interrupt (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine can be used to read and/or change the current external interrupt enable
- settings. Disabling an external interrupt enable prevents and external (hardware)
- interrupt from being signaled by the network device. Internally the interrupt events
- can still be polled by using the UNDI_GetState command.
-
- The resulting information on the interrupt state will be passed back in the CdbPtr->StatFlags.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- UINT8 IntMask;
-
- IntMask = (UINT8)(UINTN)(CdbPtr->OpFlags & (PXE_OPFLAGS_INTERRUPT_RECEIVE |
- PXE_OPFLAGS_INTERRUPT_TRANSMIT |
- PXE_OPFLAGS_INTERRUPT_COMMAND |
- PXE_OPFLAGS_INTERRUPT_SOFTWARE));
-
- switch (CdbPtr->OpFlags & PXE_OPFLAGS_INTERRUPT_OPMASK) {
- case PXE_OPFLAGS_INTERRUPT_READ:
- break;
-
- case PXE_OPFLAGS_INTERRUPT_ENABLE:
- if (IntMask == 0) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- AdapterInfo->int_mask = IntMask;
- E100bSetInterruptState (AdapterInfo);
- break;
-
- case PXE_OPFLAGS_INTERRUPT_DISABLE:
- if (IntMask != 0) {
- AdapterInfo->int_mask = (UINT16) (AdapterInfo->int_mask & ~(IntMask));
- E100bSetInterruptState (AdapterInfo);
- break;
- }
-
- //
- // else fall thru.
- //
- default:
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- if ((AdapterInfo->int_mask & PXE_OPFLAGS_INTERRUPT_RECEIVE) != 0) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_INTERRUPT_RECEIVE;
-
- }
-
- if ((AdapterInfo->int_mask & PXE_OPFLAGS_INTERRUPT_TRANSMIT) != 0) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_INTERRUPT_TRANSMIT;
-
- }
-
- if ((AdapterInfo->int_mask & PXE_OPFLAGS_INTERRUPT_COMMAND) != 0) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_INTERRUPT_COMMAND;
-
- }
-
- return ;
-}
-
-VOID
-UNDI_RecFilter (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to read and change receive filters and, if supported, read
- and change multicast MAC address filter list.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- UINT16 NewFilter;
- UINT16 OpFlags;
- PXE_DB_RECEIVE_FILTERS *DbPtr;
- UINT8 *MacAddr;
- UINTN MacCount;
- UINT16 Index;
- UINT16 copy_len;
- UINT8 *ptr1;
- UINT8 *ptr2;
- OpFlags = CdbPtr->OpFlags;
- NewFilter = (UINT16) (OpFlags & 0x1F);
-
- switch (OpFlags & PXE_OPFLAGS_RECEIVE_FILTER_OPMASK) {
- case PXE_OPFLAGS_RECEIVE_FILTER_READ:
-
- //
- // not expecting a cpb, not expecting any filter bits
- //
- if ((NewFilter != 0) || (CdbPtr->CPBsize != 0)) {
- goto BadCdb;
-
- }
-
- if ((NewFilter & PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST) == 0) {
- goto JustRead;
-
- }
-
- NewFilter = (UINT16) (NewFilter | AdapterInfo->Rx_Filter);
- //
- // all other flags are ignored except mcast_reset
- //
- break;
-
- case PXE_OPFLAGS_RECEIVE_FILTER_ENABLE:
- //
- // there should be atleast one other filter bit set.
- //
- if (NewFilter == 0) {
- //
- // nothing to enable
- //
- goto BadCdb;
- }
-
- if (CdbPtr->CPBsize != 0) {
- //
- // this must be a multicast address list!
- // don't accept the list unless selective_mcast is set
- // don't accept confusing mcast settings with this
- //
- if (((NewFilter & PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST) == 0) ||
- ((NewFilter & PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST) != 0) ||
- ((NewFilter & PXE_OPFLAGS_RECEIVE_FILTER_ALL_MULTICAST) != 0) ||
- ((CdbPtr->CPBsize % sizeof (PXE_MAC_ADDR)) != 0) ) {
- goto BadCdb;
- }
-
- MacAddr = (UINT8 *) ((UINTN) (CdbPtr->CPBaddr));
- MacCount = CdbPtr->CPBsize / sizeof (PXE_MAC_ADDR);
-
- for (; MacCount-- != 0; MacAddr += sizeof (PXE_MAC_ADDR)) {
- if (MacAddr[0] != 0x01 || MacAddr[1] != 0x00 || MacAddr[2] != 0x5E || (MacAddr[3] & 0x80) != 0) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CPB;
- return ;
- }
- }
- }
-
- //
- // check selective mcast case enable case
- //
- if ((OpFlags & PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST) != 0) {
- if (((OpFlags & PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST) != 0) ||
- ((OpFlags & PXE_OPFLAGS_RECEIVE_FILTER_ALL_MULTICAST) != 0) ) {
- goto BadCdb;
-
- }
- //
- // if no cpb, make sure we have an old list
- //
- if ((CdbPtr->CPBsize == 0) && (AdapterInfo->mcast_list.list_len == 0)) {
- goto BadCdb;
- }
- }
- //
- // if you want to enable anything, you got to have unicast
- // and you have what you already enabled!
- //
- NewFilter = (UINT16) (NewFilter | (PXE_OPFLAGS_RECEIVE_FILTER_UNICAST | AdapterInfo->Rx_Filter));
-
- break;
-
- case PXE_OPFLAGS_RECEIVE_FILTER_DISABLE:
-
- //
- // mcast list not expected, i.e. no cpb here!
- //
- if (CdbPtr->CPBsize != PXE_CPBSIZE_NOT_USED) {
- goto BadCdb;
- }
-
- NewFilter = (UINT16) ((~(CdbPtr->OpFlags & 0x1F)) & AdapterInfo->Rx_Filter);
-
- break;
-
- default:
- goto BadCdb;
- }
-
- if ((OpFlags & PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST) != 0) {
- AdapterInfo->mcast_list.list_len = 0;
- NewFilter &= (~PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST);
- }
-
- E100bSetfilter (AdapterInfo, NewFilter, CdbPtr->CPBaddr, CdbPtr->CPBsize);
-
-JustRead:
- //
- // give the current mcast list
- //
- if ((CdbPtr->DBsize != 0) && (AdapterInfo->mcast_list.list_len != 0)) {
- //
- // copy the mc list to db
- //
-
- DbPtr = (PXE_DB_RECEIVE_FILTERS *) (UINTN) CdbPtr->DBaddr;
- ptr1 = (UINT8 *) (&DbPtr->MCastList[0]);
-
- //
- // DbPtr->mc_count = AdapterInfo->mcast_list.list_len;
- //
- copy_len = (UINT16) (AdapterInfo->mcast_list.list_len * PXE_MAC_LENGTH);
-
- if (copy_len > CdbPtr->DBsize) {
- copy_len = CdbPtr->DBsize;
-
- }
-
- ptr2 = (UINT8 *) (&AdapterInfo->mcast_list.mc_list[0]);
- for (Index = 0; Index < copy_len; Index++) {
- ptr1[Index] = ptr2[Index];
- }
- }
- //
- // give the stat flags here
- //
- if (AdapterInfo->Receive_Started) {
- CdbPtr->StatFlags = (PXE_STATFLAGS) (CdbPtr->StatFlags | AdapterInfo->Rx_Filter);
-
- }
-
- return ;
-
-BadCdb:
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
-}
-
-VOID
-UNDI_StnAddr (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to get the current station and broadcast MAC addresses, and to change the
- current station MAC address.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_CPB_STATION_ADDRESS *CpbPtr;
- PXE_DB_STATION_ADDRESS *DbPtr;
- UINT16 Index;
-
- if (CdbPtr->OpFlags == PXE_OPFLAGS_STATION_ADDRESS_RESET) {
- //
- // configure the permanent address.
- // change the AdapterInfo->CurrentNodeAddress field.
- //
- if (CompareMem (
- &AdapterInfo->CurrentNodeAddress[0],
- &AdapterInfo->PermNodeAddress[0],
- PXE_MAC_LENGTH
- ) != 0) {
- for (Index = 0; Index < PXE_MAC_LENGTH; Index++) {
- AdapterInfo->CurrentNodeAddress[Index] = AdapterInfo->PermNodeAddress[Index];
- }
-
- E100bSetupIAAddr (AdapterInfo);
- }
- }
-
- if (CdbPtr->CPBaddr != (UINT64) 0) {
- CpbPtr = (PXE_CPB_STATION_ADDRESS *) (UINTN) (CdbPtr->CPBaddr);
- //
- // configure the new address
- //
- for (Index = 0; Index < PXE_MAC_LENGTH; Index++) {
- AdapterInfo->CurrentNodeAddress[Index] = CpbPtr->StationAddr[Index];
- }
-
- E100bSetupIAAddr (AdapterInfo);
- }
-
- if (CdbPtr->DBaddr != (UINT64) 0) {
- DbPtr = (PXE_DB_STATION_ADDRESS *) (UINTN) (CdbPtr->DBaddr);
- //
- // fill it with the new values
- //
- for (Index = 0; Index < PXE_MAC_LENGTH; Index++) {
- DbPtr->StationAddr[Index] = AdapterInfo->CurrentNodeAddress[Index];
- DbPtr->BroadcastAddr[Index] = AdapterInfo->BroadcastNodeAddress[Index];
- DbPtr->PermanentAddr[Index] = AdapterInfo->PermNodeAddress[Index];
- }
- }
-
- return ;
-}
-
-VOID
-UNDI_Statistics (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to read and clear the NIC traffic statistics. This command is supported only
- if the !PXE structure's Implementation flags say so.
-
- Results will be parsed out in the following manner:
- CdbPtr->DBaddr.Data[0] R Total Frames (Including frames with errors and dropped frames)
- CdbPtr->DBaddr.Data[1] R Good Frames (All frames copied into receive buffer)
- CdbPtr->DBaddr.Data[2] R Undersize Frames (Frames below minimum length for media <64 for ethernet)
- CdbPtr->DBaddr.Data[4] R Dropped Frames (Frames that were dropped because receive buffers were full)
- CdbPtr->DBaddr.Data[8] R CRC Error Frames (Frames with alignment or CRC errors)
- CdbPtr->DBaddr.Data[A] T Total Frames (Including frames with errors and dropped frames)
- CdbPtr->DBaddr.Data[B] T Good Frames (All frames copied into transmit buffer)
- CdbPtr->DBaddr.Data[C] T Undersize Frames (Frames below minimum length for media <64 for ethernet)
- CdbPtr->DBaddr.Data[E] T Dropped Frames (Frames that were dropped because of collisions)
- CdbPtr->DBaddr.Data[14] T Total Collision Frames (Total collisions on this subnet)
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- if ((CdbPtr->OpFlags &~(PXE_OPFLAGS_STATISTICS_RESET)) != 0) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- if ((CdbPtr->OpFlags & PXE_OPFLAGS_STATISTICS_RESET) != 0) {
- //
- // Reset the statistics
- //
- CdbPtr->StatCode = (UINT16) E100bStatistics (AdapterInfo, 0, 0);
- } else {
- CdbPtr->StatCode = (UINT16) E100bStatistics (AdapterInfo, CdbPtr->DBaddr, CdbPtr->DBsize);
- }
-
- return ;
-}
-
-VOID
-UNDI_ip2mac (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to translate a multicast IP address to a multicast MAC address.
-
- This results in a MAC address composed of 25 bits of fixed data with the upper 23 bits of the IP
- address being appended to it. Results passed back in the equivalent of CdbPtr->DBaddr->MAC[0-5].
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_CPB_MCAST_IP_TO_MAC *CpbPtr;
- PXE_DB_MCAST_IP_TO_MAC *DbPtr;
- UINT8 *TmpPtr;
-
- CpbPtr = (PXE_CPB_MCAST_IP_TO_MAC *) (UINTN) CdbPtr->CPBaddr;
- DbPtr = (PXE_DB_MCAST_IP_TO_MAC *) (UINTN) CdbPtr->DBaddr;
-
- if ((CdbPtr->OpFlags & PXE_OPFLAGS_MCAST_IPV6_TO_MAC) != 0) {
- //
- // for now this is not supported
- //
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_UNSUPPORTED;
- return ;
- }
-
- TmpPtr = (UINT8 *) (&CpbPtr->IP.IPv4);
- //
- // check if the ip given is a mcast IP
- //
- if ((TmpPtr[0] & 0xF0) != 0xE0) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CPB;
- }
- //
- // take the last 23 bits in IP.
- // be very careful. accessing word on a non-word boundary will hang motherboard codenamed Big Sur
- // casting the mac array (in the middle) to a UINT32 pointer and accessing
- // the UINT32 content hung the system...
- //
- DbPtr->MAC[0] = 0x01;
- DbPtr->MAC[1] = 0x00;
- DbPtr->MAC[2] = 0x5e;
- DbPtr->MAC[3] = (UINT8) (TmpPtr[1] & 0x7f);
- DbPtr->MAC[4] = (UINT8) TmpPtr[2];
- DbPtr->MAC[5] = (UINT8) TmpPtr[3];
-
- return ;
-}
-
-VOID
-UNDI_NVData (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to read and write non-volatile storage on the NIC (if supported). The NVRAM
- could be EEPROM, FLASH, or battery backed RAM.
-
- This is an optional function according to the UNDI specification (or will be......)
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_DB_NVDATA *DbPtr;
- UINT16 Index;
-
- if ((CdbPtr->OpFlags == PXE_OPFLAGS_NVDATA_READ) != 0) {
-
- if ((CdbPtr->DBsize == PXE_DBSIZE_NOT_USED) != 0) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- DbPtr = (PXE_DB_NVDATA *) (UINTN) CdbPtr->DBaddr;
-
- for (Index = 0; Index < MAX_PCI_CONFIG_LEN; Index++) {
- DbPtr->Data.Dword[Index] = AdapterInfo->NVData[Index];
-
- }
-
- } else {
- //
- // no write for now
- //
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_UNSUPPORTED;
- }
-
- return ;
-}
-
-VOID
-UNDI_Status (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine returns the current interrupt status and/or the transmitted buffer addresses.
- If the current interrupt status is returned, pending interrupts will be acknowledged by this
- command. Transmitted buffer addresses that are written to the DB are removed from the transmit
- buffer queue.
-
- Normally, this command would be polled with interrupts disabled.
-
- The transmit buffers are returned in CdbPtr->DBaddr->TxBufer[0 - NumEntries].
- The interrupt status is returned in CdbPtr->StatFlags.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_DB_GET_STATUS *DbPtr;
- PXE_DB_GET_STATUS TmpGetStatus;
- UINT16 Index;
- UINT16 Status;
- UINT16 NumEntries;
- RxFD *RxPtr;
-
- //
- // Fill in temporary GetStatus storage.
- //
- RxPtr = &AdapterInfo->rx_ring[AdapterInfo->cur_rx_ind];
-
- if ((RxPtr->cb_header.status & RX_COMPLETE) != 0) {
- TmpGetStatus.RxFrameLen = RxPtr->ActualCount & 0x3fff;
- } else {
- TmpGetStatus.RxFrameLen = 0;
- }
-
- TmpGetStatus.reserved = 0;
-
- //
- // Fill in size of next available receive packet and
- // reserved field in caller's DB storage.
- //
- DbPtr = (PXE_DB_GET_STATUS *) (UINTN) CdbPtr->DBaddr;
-
- if (CdbPtr->DBsize > 0 && CdbPtr->DBsize < sizeof (UINT32) * 2) {
- CopyMem (DbPtr, &TmpGetStatus, CdbPtr->DBsize);
- } else {
- CopyMem (DbPtr, &TmpGetStatus, sizeof (UINT32) * 2);
- }
-
- //
- //
- //
- if ((CdbPtr->OpFlags & PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS) != 0) {
- //
- // DBsize of zero is invalid if Tx buffers are requested.
- //
- if (CdbPtr->DBsize == 0) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- //
- // remember this b4 we overwrite
- //
- NumEntries = (UINT16) (CdbPtr->DBsize - sizeof (UINT64));
-
- //
- // We already filled in 2 UINT32s.
- //
- CdbPtr->DBsize = sizeof (UINT32) * 2;
-
- //
- // will claim any hanging free CBs
- //
- CheckCBList (AdapterInfo);
-
- if (AdapterInfo->xmit_done_head == AdapterInfo->xmit_done_tail) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_GET_STATUS_TXBUF_QUEUE_EMPTY;
- } else {
- for (Index = 0; NumEntries >= sizeof (UINT64); Index++, NumEntries -= sizeof (UINT64)) {
- if (AdapterInfo->xmit_done_head != AdapterInfo->xmit_done_tail) {
- DbPtr->TxBuffer[Index] = AdapterInfo->xmit_done[AdapterInfo->xmit_done_head];
- AdapterInfo->xmit_done_head = next (AdapterInfo->xmit_done_head);
- CdbPtr->DBsize += sizeof (UINT64);
- } else {
- break;
- }
- }
- }
-
- if (AdapterInfo->xmit_done_head != AdapterInfo->xmit_done_tail) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_DB_WRITE_TRUNCATED;
-
- }
- //
- // check for a receive buffer and give it's size in db
- //
- }
- //
- //
- //
- if ((CdbPtr->OpFlags & PXE_OPFLAGS_GET_INTERRUPT_STATUS) != 0) {
-
- Status = InWord (AdapterInfo, AdapterInfo->ioaddr + SCBStatus);
- AdapterInfo->Int_Status = (UINT16) (AdapterInfo->Int_Status | Status);
-
- //
- // acknoledge the interrupts
- //
- OutWord (AdapterInfo, (UINT16) (Status & 0xfc00), (UINT32) (AdapterInfo->ioaddr + SCBStatus));
-
- //
- // report all the outstanding interrupts
- //
- Status = AdapterInfo->Int_Status;
- if ((Status & SCB_STATUS_FR) != 0) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_GET_STATUS_RECEIVE;
- }
-
- if ((Status & SCB_STATUS_SWI) != 0) {
- CdbPtr->StatFlags |= PXE_STATFLAGS_GET_STATUS_SOFTWARE;
- }
- }
-
- return ;
-}
-
-VOID
-UNDI_FillHeader (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to fill media header(s) in transmit packet(s).
- Copies the MAC address into the media header whether it is dealing
- with fragmented or non-fragmented packets.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
- PXE_CPB_FILL_HEADER *Cpb;
- PXE_CPB_FILL_HEADER_FRAGMENTED *Cpbf;
- EtherHeader *MacHeader;
- UINTN Index;
-
- if (CdbPtr->CPBsize == PXE_CPBSIZE_NOT_USED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- if ((CdbPtr->OpFlags & PXE_OPFLAGS_FILL_HEADER_FRAGMENTED) != 0) {
- Cpbf = (PXE_CPB_FILL_HEADER_FRAGMENTED *) (UINTN) CdbPtr->CPBaddr;
-
- //
- // assume 1st fragment is big enough for the mac header
- //
- if ((Cpbf->FragCnt == 0) || (Cpbf->FragDesc[0].FragLen < PXE_MAC_HEADER_LEN_ETHER)) {
- //
- // no buffers given
- //
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- MacHeader = (EtherHeader *) (UINTN) Cpbf->FragDesc[0].FragAddr;
- //
- // we don't swap the protocol bytes
- //
- MacHeader->type = Cpbf->Protocol;
-
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- MacHeader->dest_addr[Index] = Cpbf->DestAddr[Index];
- MacHeader->src_addr[Index] = Cpbf->SrcAddr[Index];
- }
- } else {
- Cpb = (PXE_CPB_FILL_HEADER *) (UINTN) CdbPtr->CPBaddr;
-
- MacHeader = (EtherHeader *) (UINTN) Cpb->MediaHeader;
- //
- // we don't swap the protocol bytes
- //
- MacHeader->type = Cpb->Protocol;
-
- for (Index = 0; Index < PXE_HWADDR_LEN_ETHER; Index++) {
- MacHeader->dest_addr[Index] = Cpb->DestAddr[Index];
- MacHeader->src_addr[Index] = Cpb->SrcAddr[Index];
- }
- }
-
- return ;
-}
-
-VOID
-UNDI_Transmit (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- This routine is used to place a packet into the transmit queue. The data buffers given to
- this command are to be considered locked and the application or network driver loses
- ownership of these buffers and must not free or relocate them until the ownership returns.
-
- When the packets are transmitted, a transmit complete interrupt is generated (if interrupts
- are disabled, the transmit interrupt status is still set and can be checked using the UNDI_Status
- command.
-
- Some implementations and adapters support transmitting multiple packets with one transmit
- command. If this feature is supported, the transmit CPBs can be linked in one transmit
- command.
-
- All UNDIs support fragmented frames, now all network devices or protocols do. If a fragmented
- frame CPB is given to UNDI and the network device does not support fragmented frames
- (see !PXE.Implementation flag), the UNDI will have to copy the fragments into a local buffer
- before transmitting.
-
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
-
- if (CdbPtr->CPBsize == PXE_CPBSIZE_NOT_USED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- CdbPtr->StatCode = (PXE_STATCODE) E100bTransmit (AdapterInfo, CdbPtr->CPBaddr, CdbPtr->OpFlags);
-
- if (CdbPtr->StatCode != PXE_STATCODE_SUCCESS) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- }
-
- return ;
-}
-
-VOID
-UNDI_Receive (
- IN PXE_CDB *CdbPtr,
- IN NIC_DATA_INSTANCE *AdapterInfo
- )
-/*++
-
-Routine Description:
- When the network adapter has received a frame, this command is used to copy the frame
- into the driver/application storage location. Once a frame has been copied, it is
- removed from the receive queue.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-{
-
- //
- // check if RU has started...
- //
- if (!AdapterInfo->Receive_Started) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_NOT_INITIALIZED;
- return ;
- }
-
-
- CdbPtr->StatCode = (UINT16) E100bReceive (AdapterInfo, CdbPtr->CPBaddr, CdbPtr->DBaddr);
- if (CdbPtr->StatCode != PXE_STATCODE_SUCCESS) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
-
- }
-
- return ;
-}
-
-VOID
-UNDI_APIEntry_old (
- IN UINT64 cdb
- )
-/*++
-
-Routine Description:
- This is the main SW UNDI API entry using the older nii protocol.
- The parameter passed in is a 64 bit flat model virtual
- address of the cdb. We then jump into the common routine for both old and
- new nii protocol entries.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-// TODO: cdb - add argument and description to function comment
-{
- PXE_CDB *CdbPtr;
- NIC_DATA_INSTANCE *AdapterInfo;
-
- if (cdb == (UINT64) 0) {
- return ;
-
- }
-
- CdbPtr = (PXE_CDB *) (UINTN) cdb;
-
- if (CdbPtr->IFnum >= pxe->IFcnt) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- AdapterInfo = &(UNDI32DeviceList[CdbPtr->IFnum]->NicInfo);
-
- //
- // entering from older entry point
- //
- AdapterInfo->VersionFlag = 0x30;
- UNDI_APIEntry_Common (cdb);
-}
-
-VOID
-UNDI_APIEntry_new (
- IN UINT64 cdb
- )
-/*++
-
-Routine Description:
- This is the main SW UNDI API entry using the newer nii protocol.
- The parameter passed in is a 64 bit flat model virtual
- address of the cdb. We then jump into the common routine for both old and
- new nii protocol entries.
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-// TODO: cdb - add argument and description to function comment
-{
- PXE_CDB *CdbPtr;
- NIC_DATA_INSTANCE *AdapterInfo;
-
- if (cdb == (UINT64) 0) {
- return ;
-
- }
-
- CdbPtr = (PXE_CDB *) (UINTN) cdb;
-
- if (CdbPtr->IFnum >= pxe_31->IFcnt) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
- }
-
- AdapterInfo = &(UNDI32DeviceList[CdbPtr->IFnum]->NicInfo);
- //
- // entering from older entry point
- //
- AdapterInfo->VersionFlag = 0x31;
- UNDI_APIEntry_Common (cdb);
-}
-
-VOID
-UNDI_APIEntry_Common (
- IN UINT64 cdb
- )
-/*++
-
-Routine Description:
- This is the common routine for both old and new entry point procedures.
- The parameter passed in is a 64 bit flat model virtual
- address of the cdb. We then jump into the service routine pointed to by the
- Api_Table[OpCode].
-
-Arguments:
- CdbPtr - Pointer to the command descriptor block.
- AdapterInfo - Pointer to the NIC data structure information which the UNDI driver is layering on..
-
-Returns:
- None
-
---*/
-// TODO: cdb - add argument and description to function comment
-{
- PXE_CDB *CdbPtr;
- NIC_DATA_INSTANCE *AdapterInfo;
- UNDI_CALL_TABLE *tab_ptr;
-
- CdbPtr = (PXE_CDB *) (UINTN) cdb;
-
- //
- // check the OPCODE range
- //
- if ((CdbPtr->OpCode > PXE_OPCODE_LAST_VALID) ||
- (CdbPtr->StatCode != PXE_STATCODE_INITIALIZE) ||
- (CdbPtr->StatFlags != PXE_STATFLAGS_INITIALIZE) ||
- (CdbPtr->IFnum >= pxe_31->IFcnt) ) {
- goto badcdb;
-
- }
-
- if (CdbPtr->CPBsize == PXE_CPBSIZE_NOT_USED) {
- if (CdbPtr->CPBaddr != PXE_CPBADDR_NOT_USED) {
- goto badcdb;
- }
- } else if (CdbPtr->CPBaddr == PXE_CPBADDR_NOT_USED) {
- goto badcdb;
- }
-
- if (CdbPtr->DBsize == PXE_DBSIZE_NOT_USED) {
- if (CdbPtr->DBaddr != PXE_DBADDR_NOT_USED) {
- goto badcdb;
- }
- } else if (CdbPtr->DBaddr == PXE_DBADDR_NOT_USED) {
- goto badcdb;
- }
-
- //
- // check if cpbsize and dbsize are as needed
- // check if opflags are as expected
- //
- tab_ptr = &api_table[CdbPtr->OpCode];
-
- if (tab_ptr->cpbsize != (UINT16) (DONT_CHECK) && tab_ptr->cpbsize != CdbPtr->CPBsize) {
- goto badcdb;
- }
-
- if (tab_ptr->dbsize != (UINT16) (DONT_CHECK) && tab_ptr->dbsize != CdbPtr->DBsize) {
- goto badcdb;
- }
-
- if (tab_ptr->opflags != (UINT16) (DONT_CHECK) && tab_ptr->opflags != CdbPtr->OpFlags) {
- goto badcdb;
-
- }
-
- AdapterInfo = &(UNDI32DeviceList[CdbPtr->IFnum]->NicInfo);
-
- //
- // check if UNDI_State is valid for this call
- //
- if (tab_ptr->state != (UINT16) (-1)) {
- //
- // should atleast be started
- //
- if (AdapterInfo->State == PXE_STATFLAGS_GET_STATE_STOPPED) {
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_NOT_STARTED;
- return ;
- }
- //
- // check if it should be initialized
- //
- if (tab_ptr->state == 2) {
- if (AdapterInfo->State != PXE_STATFLAGS_GET_STATE_INITIALIZED) {
- CdbPtr->StatCode = PXE_STATCODE_NOT_INITIALIZED;
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- return ;
- }
- }
- }
- //
- // set the return variable for success case here
- //
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_COMPLETE;
- CdbPtr->StatCode = PXE_STATCODE_SUCCESS;
-
- tab_ptr->api_ptr (CdbPtr, AdapterInfo);
- return ;
- //
- // %% AVL - check for command linking
- //
-badcdb:
- CdbPtr->StatFlags = PXE_STATFLAGS_COMMAND_FAILED;
- CdbPtr->StatCode = PXE_STATCODE_INVALID_CDB;
- return ;
-}
-
-STATIC
-UINT8
-ChkSum (
- IN VOID *Buffer,
- IN UINT16 Len
- )
-/*++
-
-Routine Description:
- This does an 8 bit check sum of the passed in buffer for Len bytes.
- This is primarily used to update the check sum in the SW UNDI header.
-
-Arguments:
- Buffer - Pointer to the passed in buffer to check sum
- Len - Length of buffer to be check summed in bytes.
-
-Returns:
- None
-
---*/
-{
- UINT8 Chksum;
- INT8 *Bp;
-
- Chksum = 0;
- if ((Bp = Buffer) != NULL) {
- while (Len--) {
- Chksum = (UINT8) (Chksum +*Bp++);
-
- }
-
- }
-
- return Chksum;
-}
-
-VOID
-PxeUpdate (
- IN NIC_DATA_INSTANCE *NicPtr,
- IN PXE_SW_UNDI *PxePtr
- )
-/*++
-
-Routine Description:
- When called with a null NicPtr, this routine decrements the number of NICs
- this UNDI is supporting and removes the NIC_DATA_POINTER from the array.
- Otherwise, it increments the number of NICs this UNDI is supported and
- updates the pxe.Fudge to ensure a proper check sum results.
-
-Arguments:
- NicPtr - Pointer to the NIC data structure.
-
-Returns:
- None
-
---*/
-// TODO: PxePtr - add argument and description to function comment
-{
- if (NicPtr == NULL) {
- if (PxePtr->IFcnt > 0) {
- //
- // number of NICs this undi supports
- //
- PxePtr->IFcnt--;
- }
-
- PxePtr->Fudge = (UINT8) (PxePtr->Fudge - ChkSum ((VOID *) PxePtr, PxePtr->Len));
- return ;
- }
-
- //
- // number of NICs this undi supports
- //
- PxePtr->IFcnt++;
- PxePtr->Fudge = (UINT8) (PxePtr->Fudge - ChkSum ((VOID *) PxePtr, PxePtr->Len));
-
- return ;
-}
-
-VOID
-PxeStructInit (
- IN PXE_SW_UNDI *PxePtr,
- IN UINTN VersionFlag
- )
-/*++
-
-Routine Description:
- Initialize the !PXE structure
-
-Arguments:
- RemainingDevicePath - Not used, always produce all possible children.
-
-Returns:
- EFI_SUCCESS - This driver is added to Controller.
- other - This driver does not support this device.
-
---*/
-// TODO: PxePtr - add argument and description to function comment
-// TODO: VersionFlag - add argument and description to function comment
-{
- //
- // Initialize the !PXE structure
- //
- PxePtr->Signature = PXE_ROMID_SIGNATURE;
- PxePtr->Len = sizeof (PXE_SW_UNDI);
- //
- // cksum
- //
- PxePtr->Fudge = 0;
- //
- // number of NICs this undi supports
- //
- PxePtr->IFcnt = 0;
- PxePtr->Rev = PXE_ROMID_REV;
- PxePtr->MajorVer = PXE_ROMID_MAJORVER;
- PxePtr->MinorVer = PXE_ROMID_MINORVER;
- PxePtr->reserved1 = 0;
-
- PxePtr->Implementation = PXE_ROMID_IMP_SW_VIRT_ADDR |
- PXE_ROMID_IMP_FRAG_SUPPORTED |
- PXE_ROMID_IMP_CMD_LINK_SUPPORTED |
- PXE_ROMID_IMP_NVDATA_READ_ONLY |
- PXE_ROMID_IMP_STATION_ADDR_SETTABLE |
- PXE_ROMID_IMP_PROMISCUOUS_MULTICAST_RX_SUPPORTED |
- PXE_ROMID_IMP_PROMISCUOUS_RX_SUPPORTED |
- PXE_ROMID_IMP_BROADCAST_RX_SUPPORTED |
- PXE_ROMID_IMP_FILTERED_MULTICAST_RX_SUPPORTED |
- PXE_ROMID_IMP_SOFTWARE_INT_SUPPORTED |
- PXE_ROMID_IMP_PACKET_RX_INT_SUPPORTED;
-
- if (VersionFlag == 0x30) {
- PxePtr->EntryPoint = (UINT64) UNDI_APIEntry_old;
- } else {
- PxePtr->EntryPoint = (UINT64) UNDI_APIEntry_new;
- PxePtr->MinorVer = PXE_ROMID_MINORVER_31;
- }
-
- PxePtr->reserved2[0] = 0;
- PxePtr->reserved2[1] = 0;
- PxePtr->reserved2[2] = 0;
- PxePtr->BusCnt = 1;
- PxePtr->BusType[0] = PXE_BUSTYPE_PCI;
-
- PxePtr->Fudge = (UINT8) (PxePtr->Fudge - ChkSum ((VOID *) PxePtr, PxePtr->Len));
-}
-
|