diff options
author | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
---|---|---|
committer | lhauch <lhauch@6f19259b-4bc3-4df7-8a09-765794883524> | 2008-12-31 16:26:40 +0000 |
commit | 808def96aa4589fba9c2d0ea55837754a3b7a4f7 (patch) | |
tree | 0ea221c59abb2474c694e7ab5bd61006be77e47e /EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.h | |
parent | 9216450d1143056a50a5f916984a2d7faf590488 (diff) | |
download | edk2-platforms-808def96aa4589fba9c2d0ea55837754a3b7a4f7.tar.xz |
Retiring the ANT/JAVA build and removing the older EDK II packages that required ANT/JAVA.
Last Ant/Java build was r7166
Developers requiring the Java/Ant packages should checkout the branch from:
https://edk2.tianocore.org/svn/edk2/branches/AntJava
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7168 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.h')
-rw-r--r-- | EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.h | 668 |
1 files changed, 0 insertions, 668 deletions
diff --git a/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.h b/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.h deleted file mode 100644 index e832cb250f..0000000000 --- a/EdkModulePkg/Bus/Pci/Undi/RuntimeDxe/E100b.h +++ /dev/null @@ -1,668 +0,0 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- E100B.H
-
-Abstract:
-
-
-Revision History
-
---*/
-// pci config offsets:
-
-#define RX_BUFFER_COUNT 32
-#define TX_BUFFER_COUNT 32
-
-#define PCI_VENDOR_ID_INTEL 0x8086
-#define PCI_DEVICE_ID_INTEL_82557 0x1229
-#define D100_VENDOR_ID 0x8086
-#define D100_DEVICE_ID 0x1229
-#define D102_DEVICE_ID 0x2449
-
-#define ICH3_DEVICE_ID_1 0x1031
-#define ICH3_DEVICE_ID_2 0x1032
-#define ICH3_DEVICE_ID_3 0x1033
-#define ICH3_DEVICE_ID_4 0x1034
-#define ICH3_DEVICE_ID_5 0x1035
-#define ICH3_DEVICE_ID_6 0x1036
-#define ICH3_DEVICE_ID_7 0x1037
-#define ICH3_DEVICE_ID_8 0x1038
-
-#define SPEEDO_DEVICE_ID 0x1227
-#define SPLASH1_DEVICE_ID 0x1226
-
-
-// bit fields for the command
-#define PCI_COMMAND_MASTER 0x04 // bit 2
-#define PCI_COMMAND_IO 0x01 // bit 0
-#define PCI_COMMAND 0x04
-#define PCI_LATENCY_TIMER 0x0D
-
-#define ETHER_MAC_ADDR_LEN 6
-#ifdef AVL_XXX
-#define ETHER_HEADER_LEN 14
-// media interface type
-// #define INTERFACE_TYPE "
-
-// Hardware type values
-#define HW_ETHER_TYPE 1
-#define HW_EXPERIMENTAL_ETHER_TYPE 2
-#define HW_IEEE_TYPE 6
-#define HW_ARCNET_TYPE 7
-
-#endif // AVL_XXX
-
-#define MAX_ETHERNET_PKT_SIZE 1514 // including eth header
-#define RX_BUFFER_SIZE 1536 // including crc and padding
-#define TX_BUFFER_SIZE 64
-#define ETH_MTU 1500 // does not include ethernet header length
-
-#define SPEEDO3_TOTAL_SIZE 0x20
-
-#pragma pack(1)
-
-typedef struct eth {
- UINT8 dest_addr[PXE_HWADDR_LEN_ETHER];
- UINT8 src_addr[PXE_HWADDR_LEN_ETHER];
- UINT16 type;
-} EtherHeader;
-
-#pragma pack(1)
-typedef struct CONFIG_HEADER {
- UINT16 VendorID;
- UINT16 DeviceID;
- UINT16 Command;
- UINT16 Status;
- UINT16 RevID;
- UINT16 ClassID;
- UINT8 CacheLineSize;
- UINT8 LatencyTimer;
- UINT8 HeaderType; // must be zero to impose this structure...
- UINT8 BIST; // built-in self test
- UINT32 BaseAddressReg_0; // memory mapped address
- UINT32 BaseAddressReg_1; //io mapped address, Base IO address
- UINT32 BaseAddressReg_2; // option rom address
- UINT32 BaseAddressReg_3;
- UINT32 BaseAddressReg_4;
- UINT32 BaseAddressReg_5;
- UINT32 CardBusCISPtr;
- UINT16 SubVendorID;
- UINT16 SubSystemID;
- UINT32 ExpansionROMBaseAddr;
- UINT8 CapabilitiesPtr;
- UINT8 reserved1;
- UINT16 Reserved2;
- UINT32 Reserved3;
- UINT8 int_line;
- UINT8 int_pin;
- UINT8 Min_gnt;
- UINT8 Max_lat;
-} PCI_CONFIG_HEADER;
-#pragma pack()
-
-//-------------------------------------------------------------------------
-// Offsets to the various registers.
-// All accesses need not be longword aligned.
-//-------------------------------------------------------------------------
-enum speedo_offsets {
- SCBStatus = 0, SCBCmd = 2, // Rx/Command Unit command and status.
- SCBPointer = 4, // General purpose pointer.
- SCBPort = 8, // Misc. commands and operands.
- SCBflash = 12, SCBeeprom = 14, // EEPROM and flash memory control.
- SCBCtrlMDI = 16, // MDI interface control.
- SCBEarlyRx = 20, // Early receive byte count.
- SCBEarlyRxInt = 24, SCBFlowCtrlReg = 25, SCBPmdr = 27,
- // offsets for general control registers (GCRs)
- SCBGenCtrl = 28, SCBGenStatus = 29, SCBGenCtrl2 = 30, SCBRsvd = 31
-};
-
-#define GCR2_EEPROM_ACCESS_SEMAPHORE 0x80 // bit offset into the gcr2
-
-//-------------------------------------------------------------------------
-// Action commands - Commands that can be put in a command list entry.
-//-------------------------------------------------------------------------
-enum commands {
- CmdNOp = 0, CmdIASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
- CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7,
- CmdSuspend = 0x4000, /* Suspend after completion. */
- CmdIntr = 0x2000, /* Interrupt after completion. */
- CmdTxFlex = 0x0008 /* Use "Flexible mode" for CmdTx command. */
-};
-
-//-------------------------------------------------------------------------
-// port commands
-//-------------------------------------------------------------------------
-#define PORT_RESET 0
-#define PORT_SELF_TEST 1
-#define POR_SELECTIVE_RESET 2
-#define PORT_DUMP_POINTER 2
-
-//-------------------------------------------------------------------------
-// SCB Command Word bit definitions
-//-------------------------------------------------------------------------
-//- CUC fields
-#define CU_START 0x0010
-#define CU_RESUME 0x0020
-#define CU_STATSADDR 0x0040
-#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */
-#define CU_CMD_BASE 0x0060 /* Base address to add to add CU commands. */
-#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */
-
-//- RUC fields
-#define RX_START 0x0001
-#define RX_RESUME 0x0002
-#define RX_ABORT 0x0004
-#define RX_ADDR_LOAD 0x0006 /* load ru_base_reg */
-#define RX_RESUMENR 0x0007
-
-// Interrupt fields (assuming byte addressing)
-#define INT_MASK 0x0100
-#define DRVR_INT 0x0200 /* Driver generated interrupt. */
-
-//- CB Status Word
-#define CMD_STATUS_COMPLETE 0x8000
-#define RX_STATUS_COMPLETE 0x8000
-#define CMD_STATUS_MASK 0xF000
-
-//-------------------------------------------------------------------------
-//- SCB Status bits:
-// Interrupts are ACKed by writing to the upper 6 interrupt bits
-//-------------------------------------------------------------------------
-#define SCB_STATUS_MASK 0xFC00 // bits 2-7 - STATUS/ACK Mask
-#define SCB_STATUS_CX_TNO 0x8000 // BIT_15 - CX or TNO Interrupt
-#define SCB_STATUS_FR 0x4000 // BIT_14 - FR Interrupt
-#define SCB_STATUS_CNA 0x2000 // BIT_13 - CNA Interrupt
-#define SCB_STATUS_RNR 0x1000 // BIT_12 - RNR Interrupt
-#define SCB_STATUS_MDI 0x0800 // BIT_11 - MDI R/W Done Interrupt
-#define SCB_STATUS_SWI 0x0400 // BIT_10 - SWI Interrupt
-
-// CU STATUS: bits 6 & 7
-#define SCB_STATUS_CU_MASK 0x00C0 // bits 6 & 7
-#define SCB_STATUS_CU_IDLE 0x0000 // 00
-#define SCB_STATUS_CU_SUSPEND 0x0040 // 01
-#define SCB_STATUS_CU_ACTIVE 0x0080 // 10
-
-// RU STATUS: bits 2-5
-#define SCB_RUS_IDLE 0x0000
-#define SCB_RUS_SUSPENDED 0x0004 // bit 2
-#define SCB_RUS_NO_RESOURCES 0x0008 // bit 3
-#define SCB_RUS_READY 0x0010 // bit 4
-
-//-------------------------------------------------------------------------
-// Bit Mask definitions
-//-------------------------------------------------------------------------
-#define BIT_0 0x0001
-#define BIT_1 0x0002
-#define BIT_2 0x0004
-#define BIT_3 0x0008
-#define BIT_4 0x0010
-#define BIT_5 0x0020
-#define BIT_6 0x0040
-#define BIT_7 0x0080
-#define BIT_8 0x0100
-#define BIT_9 0x0200
-#define BIT_10 0x0400
-#define BIT_11 0x0800
-#define BIT_12 0x1000
-#define BIT_13 0x2000
-#define BIT_14 0x4000
-#define BIT_15 0x8000
-#define BIT_24 0x01000000
-#define BIT_28 0x10000000
-
-
-//-------------------------------------------------------------------------
-// MDI Control register bit definitions
-//-------------------------------------------------------------------------
-#define MDI_DATA_MASK BIT_0_15 // MDI Data port
-#define MDI_REG_ADDR BIT_16_20 // which MDI register to read/write
-#define MDI_PHY_ADDR BIT_21_25 // which PHY to read/write
-#define MDI_PHY_OPCODE BIT_26_27 // which PHY to read/write
-#define MDI_PHY_READY BIT_28 // PHY is ready for another MDI cycle
-#define MDI_PHY_INT_ENABLE BIT_29 // Assert INT at MDI cycle completion
-
-#define BIT_0_2 0x0007
-#define BIT_0_3 0x000F
-#define BIT_0_4 0x001F
-#define BIT_0_5 0x003F
-#define BIT_0_6 0x007F
-#define BIT_0_7 0x00FF
-#define BIT_0_8 0x01FF
-#define BIT_0_13 0x3FFF
-#define BIT_0_15 0xFFFF
-#define BIT_1_2 0x0006
-#define BIT_1_3 0x000E
-#define BIT_2_5 0x003C
-#define BIT_3_4 0x0018
-#define BIT_4_5 0x0030
-#define BIT_4_6 0x0070
-#define BIT_4_7 0x00F0
-#define BIT_5_7 0x00E0
-#define BIT_5_9 0x03E0
-#define BIT_5_12 0x1FE0
-#define BIT_5_15 0xFFE0
-#define BIT_6_7 0x00c0
-#define BIT_7_11 0x0F80
-#define BIT_8_10 0x0700
-#define BIT_9_13 0x3E00
-#define BIT_12_15 0xF000
-
-#define BIT_16_20 0x001F0000
-#define BIT_21_25 0x03E00000
-#define BIT_26_27 0x0C000000
-
-//-------------------------------------------------------------------------
-// MDI Control register opcode definitions
-//-------------------------------------------------------------------------
-#define MDI_WRITE 1 // Phy Write
-#define MDI_READ 2 // Phy read
-
-//-------------------------------------------------------------------------
-// PHY 100 MDI Register/Bit Definitions
-//-------------------------------------------------------------------------
-// MDI register set
-#define MDI_CONTROL_REG 0x00 // MDI control register
-#define MDI_STATUS_REG 0x01 // MDI Status regiser
-#define PHY_ID_REG_1 0x02 // Phy indentification reg (word 1)
-#define PHY_ID_REG_2 0x03 // Phy indentification reg (word 2)
-#define AUTO_NEG_ADVERTISE_REG 0x04 // Auto-negotiation advertisement
-#define AUTO_NEG_LINK_PARTNER_REG 0x05 // Auto-negotiation link partner ability
-#define AUTO_NEG_EXPANSION_REG 0x06 // Auto-negotiation expansion
-#define AUTO_NEG_NEXT_PAGE_REG 0x07 // Auto-negotiation next page transmit
-#define EXTENDED_REG_0 0x10 // Extended reg 0 (Phy 100 modes)
-#define EXTENDED_REG_1 0x14 // Extended reg 1 (Phy 100 error indications)
-#define NSC_CONG_CONTROL_REG 0x17 // National (TX) congestion control
-#define NSC_SPEED_IND_REG 0x19 // National (TX) speed indication
-
-// MDI Control register bit definitions
-#define MDI_CR_COLL_TEST_ENABLE BIT_7 // Collision test enable
-#define MDI_CR_FULL_HALF BIT_8 // FDX =1, half duplex =0
-#define MDI_CR_RESTART_AUTO_NEG BIT_9 // Restart auto negotiation
-#define MDI_CR_ISOLATE BIT_10 // Isolate PHY from MII
-#define MDI_CR_POWER_DOWN BIT_11 // Power down
-#define MDI_CR_AUTO_SELECT BIT_12 // Auto speed select enable
-#define MDI_CR_10_100 BIT_13 // 0 = 10Mbs, 1 = 100Mbs
-#define MDI_CR_LOOPBACK BIT_14 // 0 = normal, 1 = loopback
-#define MDI_CR_RESET BIT_15 // 0 = normal, 1 = PHY reset
-
-// MDI Status register bit definitions
-#define MDI_SR_EXT_REG_CAPABLE BIT_0 // Extended register capabilities
-#define MDI_SR_JABBER_DETECT BIT_1 // Jabber detected
-#define MDI_SR_LINK_STATUS BIT_2 // Link Status -- 1 = link
-#define MDI_SR_AUTO_SELECT_CAPABLE BIT_3 // Auto speed select capable
-#define MDI_SR_REMOTE_FAULT_DETECT BIT_4 // Remote fault detect
-#define MDI_SR_AUTO_NEG_COMPLETE BIT_5 // Auto negotiation complete
-#define MDI_SR_10T_HALF_DPX BIT_11 // 10BaseT Half Duplex capable
-#define MDI_SR_10T_FULL_DPX BIT_12 // 10BaseT full duplex capable
-#define MDI_SR_TX_HALF_DPX BIT_13 // TX Half Duplex capable
-#define MDI_SR_TX_FULL_DPX BIT_14 // TX full duplex capable
-#define MDI_SR_T4_CAPABLE BIT_15 // T4 capable
-
-// Auto-Negotiation advertisement register bit definitions
-#define NWAY_AD_SELCTOR_FIELD BIT_0_4 // identifies supported protocol
-#define NWAY_AD_ABILITY BIT_5_12 // technologies that are supported
-#define NWAY_AD_10T_HALF_DPX BIT_5 // 10BaseT Half Duplex capable
-#define NWAY_AD_10T_FULL_DPX BIT_6 // 10BaseT full duplex capable
-#define NWAY_AD_TX_HALF_DPX BIT_7 // TX Half Duplex capable
-#define NWAY_AD_TX_FULL_DPX BIT_8 // TX full duplex capable
-#define NWAY_AD_T4_CAPABLE BIT_9 // T4 capable
-#define NWAY_AD_REMOTE_FAULT BIT_13 // indicates local remote fault
-#define NWAY_AD_RESERVED BIT_14 // reserved
-#define NWAY_AD_NEXT_PAGE BIT_15 // Next page (not supported)
-
-// Auto-Negotiation link partner ability register bit definitions
-#define NWAY_LP_SELCTOR_FIELD BIT_0_4 // identifies supported protocol
-#define NWAY_LP_ABILITY BIT_5_9 // technologies that are supported
-#define NWAY_LP_REMOTE_FAULT BIT_13 // indicates partner remote fault
-#define NWAY_LP_ACKNOWLEDGE BIT_14 // acknowledge
-#define NWAY_LP_NEXT_PAGE BIT_15 // Next page (not supported)
-
-// Auto-Negotiation expansion register bit definitions
-#define NWAY_EX_LP_NWAY BIT_0 // link partner is NWAY
-#define NWAY_EX_PAGE_RECEIVED BIT_1 // link code word received
-#define NWAY_EX_NEXT_PAGE_ABLE BIT_2 // local is next page able
-#define NWAY_EX_LP_NEXT_PAGE_ABLE BIT_3 // partner is next page able
-#define NWAY_EX_PARALLEL_DET_FLT BIT_4 // parallel detection fault
-#define NWAY_EX_RESERVED BIT_5_15 // reserved
-
-
-// PHY 100 Extended Register 0 bit definitions
-#define PHY_100_ER0_FDX_INDIC BIT_0 // 1 = FDX, 0 = half duplex
-#define PHY_100_ER0_SPEED_INDIC BIT_1 // 1 = 100mbs, 0= 10mbs
-#define PHY_100_ER0_WAKE_UP BIT_2 // Wake up DAC
-#define PHY_100_ER0_RESERVED BIT_3_4 // Reserved
-#define PHY_100_ER0_REV_CNTRL BIT_5_7 // Revsion control (A step = 000)
-#define PHY_100_ER0_FORCE_FAIL BIT_8 // Force Fail is enabled
-#define PHY_100_ER0_TEST BIT_9_13 // Revsion control (A step = 000)
-#define PHY_100_ER0_LINKDIS BIT_14 // Link integrity test is disabled
-#define PHY_100_ER0_JABDIS BIT_15 // Jabber function is disabled
-
-
-// PHY 100 Extended Register 1 bit definitions
-#define PHY_100_ER1_RESERVED BIT_0_8 // Reserved
-#define PHY_100_ER1_CH2_DET_ERR BIT_9 // Channel 2 EOF detection error
-#define PHY_100_ER1_MANCH_CODE_ERR BIT_10 // Manchester code error
-#define PHY_100_ER1_EOP_ERR BIT_11 // EOP error
-#define PHY_100_ER1_BAD_CODE_ERR BIT_12 // bad code error
-#define PHY_100_ER1_INV_CODE_ERR BIT_13 // invalid code error
-#define PHY_100_ER1_DC_BAL_ERR BIT_14 // DC balance error
-#define PHY_100_ER1_PAIR_SKEW_ERR BIT_15 // Pair skew error
-
-// National Semiconductor TX phy congestion control register bit definitions
-#define NSC_TX_CONG_TXREADY BIT_10 // Makes TxReady an input
-#define NSC_TX_CONG_ENABLE BIT_8 // Enables congestion control
-#define NSC_TX_CONG_F_CONNECT BIT_5 // Enables congestion control
-
-// National Semiconductor TX phy speed indication register bit definitions
-#define NSC_TX_SPD_INDC_SPEED BIT_6 // 0 = 100mb, 1=10mb
-
-//-------------------------------------------------------------------------
-// Phy related constants
-//-------------------------------------------------------------------------
-#define PHY_503 0
-#define PHY_100_A 0x000003E0
-#define PHY_100_C 0x035002A8
-#define PHY_TX_ID 0x015002A8
-#define PHY_NSC_TX 0x5c002000
-#define PHY_OTHER 0xFFFF
-
-#define PHY_MODEL_REV_ID_MASK 0xFFF0FFFF
-#define PARALLEL_DETECT 0
-#define N_WAY 1
-
-#define RENEGOTIATE_TIME 35 // (3.5 Seconds)
-
-#define CONNECTOR_AUTO 0
-#define CONNECTOR_TPE 1
-#define CONNECTOR_MII 2
-
-//-------------------------------------------------------------------------
-
-/* The Speedo3 Rx and Tx frame/buffer descriptors. */
-#pragma pack(1)
-struct CB_Header { /* A generic descriptor. */
- UINT16 status; /* Offset 0. */
- UINT16 command; /* Offset 2. */
- UINT32 link; /* struct descriptor * */
-};
-
-/* transmit command block structure */
-#pragma pack(1)
-typedef struct s_TxCB {
- struct CB_Header cb_header;
- UINT32 PhysTBDArrayAddres; /* address of an array that contains
- physical TBD pointers */
- UINT16 ByteCount; /* immediate data count = 0 always */
- UINT8 Threshold;
- UINT8 TBDCount;
- UINT8 ImmediateData[TX_BUFFER_SIZE];
- /* following fields are not seen by the 82557 */
- struct TBD {
- UINT32 phys_buf_addr;
- UINT32 buf_len;
- } TBDArray[MAX_XMIT_FRAGMENTS];
- UINT32 PhysArrayAddr; /* in case the one in the header is lost */
- UINT32 PhysTCBAddress; /* for this TCB */
- struct s_TxCB *NextTCBVirtualLinkPtr;
- struct s_TxCB *PrevTCBVirtualLinkPtr;
- UINT64 free_data_ptr; // to be given to the upper layer when this xmit completes1
-}TxCB;
-
-/* The Speedo3 Rx and Tx buffer descriptors. */
-#pragma pack(1)
-typedef struct s_RxFD { /* Receive frame descriptor. */
- struct CB_Header cb_header;
- UINT32 rx_buf_addr; /* VOID * */
- UINT16 ActualCount;
- UINT16 RFDSize;
- UINT8 RFDBuffer[RX_BUFFER_SIZE];
- UINT8 forwarded;
- UINT8 junk[3];
-}RxFD;
-
-/* Elements of the RxFD.status word. */
-#define RX_COMPLETE 0x8000
-#define RX_FRAME_OK 0x2000
-
-/* Elements of the dump_statistics block. This block must be lword aligned. */
-#pragma pack(1)
-struct speedo_stats {
- UINT32 tx_good_frames;
- UINT32 tx_coll16_errs;
- UINT32 tx_late_colls;
- UINT32 tx_underruns;
- UINT32 tx_lost_carrier;
- UINT32 tx_deferred;
- UINT32 tx_one_colls;
- UINT32 tx_multi_colls;
- UINT32 tx_total_colls;
- UINT32 rx_good_frames;
- UINT32 rx_crc_errs;
- UINT32 rx_align_errs;
- UINT32 rx_resource_errs;
- UINT32 rx_overrun_errs;
- UINT32 rx_colls_errs;
- UINT32 rx_runt_errs;
- UINT32 done_marker;
-};
-#pragma pack()
-
-
-struct Krn_Mem{
- RxFD rx_ring[RX_BUFFER_COUNT];
- TxCB tx_ring[TX_BUFFER_COUNT];
- struct speedo_stats statistics;
-};
-#define MEMORY_NEEDED sizeof(struct Krn_Mem)
-
-/* The parameters for a CmdConfigure operation.
- There are so many options that it would be difficult to document each bit.
- We mostly use the default or recommended settings.
-*/
-
-/*
- *--------------------------------------------------------------------------
- * Configuration CB Parameter Bit Definitions
- *--------------------------------------------------------------------------
- */
-// - Byte 0 (Default Value = 16h)
-#define CFIG_BYTE_COUNT 0x16 // 22 Configuration Bytes
-
-//- Byte 1 (Default Value = 88h)
-#define CFIG_TXRX_FIFO_LIMIT 0x88
-
-//- Byte 2 (Default Value = 0)
-#define CFIG_ADAPTIVE_IFS 0
-
-//- Byte 3 (Default Value = 0, ALWAYS. This byte is RESERVED)
-#define CFIG_RESERVED 0
-
-//- Byte 4 (Default Value = 0. Default implies that Rx DMA cannot be
-//- preempted).
-#define CFIG_RXDMA_BYTE_COUNT 0
-
-//- Byte 5 (Default Value = 80h. Default implies that Tx DMA cannot be
-//- preempted. However, setting these counters is enabled.)
-#define CFIG_DMBC_ENABLE 0x80
-
-//- Byte 6 (Default Value = 33h. Late SCB enabled, No TNO interrupts,
-//- CNA interrupts and do not save bad frames.)
-#define CFIG_LATE_SCB 1 // BIT 0
-#define CFIG_TNO_INTERRUPT 0x4 // BIT 2
-#define CFIG_CI_INTERRUPT 0x8 // BIT 3
-#define CFIG_SAVE_BAD_FRAMES 0x80 // BIT_7
-
-//- Byte 7 (Default Value = 7h. Discard short frames automatically and
-//- attempt upto 3 retries on transmit.)
-#define CFIG_DISCARD_SHORTRX 0x00001
-#define CFIG_URUN_RETRY BIT_1 OR BIT_2
-
-//- Byte 8 (Default Value = 1. Enable MII mode.)
-#define CFIG_503_MII BIT_0
-
-//- Byte 9 (Default Value = 0, ALWAYS)
-
-//- Byte 10 (Default Value = 2Eh)
-#define CFIG_NSAI BIT_3
-#define CFIG_PREAMBLE_LENGTH BIT_5 ;- Bit 5-4 = 1-0
-#define CFIG_NO_LOOPBACK 0
-#define CFIG_INTERNAL_LOOPBACK BIT_6
-#define CFIG_EXT_LOOPBACK BIT_7
-#define CFIG_EXT_PIN_LOOPBACK BIT_6 OR BIT_7
-
-//- Byte 11 (Default Value = 0)
-#define CFIG_LINEAR_PRIORITY 0
-
-//- Byte 12 (Default Value = 60h)
-#define CFIG_LPRIORITY_MODE 0
-#define CFIG_IFS 6 ;- 6 * 16 = 96
-
-//- Byte 13 (Default Value = 0, ALWAYS)
-
-//- Byte 14 (Default Value = 0F2h, ALWAYS)
-
-//- Byte 15 (Default Value = E8h)
-#define CFIG_PROMISCUOUS_MODE BIT_0
-#define CFIG_BROADCAST_DISABLE BIT_1
-#define CFIG_CRS_CDT BIT_7
-
-//- Byte 16 (Default Value = 0, ALWAYS)
-
-//- Byte 17 (Default Value = 40h, ALWAYS)
-
-//- Byte 18 (Default Value = F2h)
-#define CFIG_STRIPPING BIT_0
-#define CFIG_PADDING BIT_1
-#define CFIG_RX_CRC_TRANSFER BIT_2
-
-//- Byte 19 (Default Value = 80h)
-#define CFIG_FORCE_FDX BIT_6
-#define CFIG_FDX_PIN_ENABLE BIT_7
-
-//- Byte 20 (Default Value = 3Fh)
-#define CFIG_MULTI_IA BIT_6
-
-//- Byte 21 (Default Value = 05)
-#define CFIG_MC_ALL BIT_3
-
-/*-----------------------------------------------------------------------*/
-#define D102_REVID 0x0b
-
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-typedef struct s_data_instance {
-
- UINT16 State; // stopped, started or initialized
- UINT16 Bus;
- UINT8 Device;
- UINT8 Function;
- UINT16 VendorID;
- UINT16 DeviceID;
- UINT16 RevID;
- UINT16 SubVendorID;
- UINT16 SubSystemID;
-
- UINT8 PermNodeAddress[PXE_MAC_LENGTH];
- UINT8 CurrentNodeAddress[PXE_MAC_LENGTH];
- UINT8 BroadcastNodeAddress[PXE_MAC_LENGTH];
- UINT32 Config[MAX_PCI_CONFIG_LEN];
- UINT32 NVData[MAX_EEPROM_LEN];
-
- UINT32 ioaddr;
- UINT32 flash_addr;
-
- UINT16 LinkSpeed; // actual link speed setting
- UINT16 LinkSpeedReq; // requested (forced) link speed
- UINT8 DuplexReq; // requested duplex
- UINT8 Duplex; // Duplex set
- UINT8 CableDetect; // 1 to detect and 0 not to detect the cable
- UINT8 LoopBack;
-
- UINT16 TxBufCnt;
- UINT16 TxBufSize;
- UINT16 RxBufCnt;
- UINT16 RxBufSize;
- UINT32 RxTotals;
- UINT32 TxTotals;
-
- UINT16 int_mask;
- UINT16 Int_Status;
- UINT16 PhyRecord[2]; // primary and secondary PHY record registers from eeprom
- UINT8 PhyAddress;
- UINT8 int_num;
- UINT16 NVData_Len;
- UINT32 MemoryLength;
-
- RxFD *rx_ring; // array of rx buffers
- TxCB *tx_ring; // array of tx buffers
- struct speedo_stats *statistics;
- TxCB *FreeTxHeadPtr;
- TxCB *FreeTxTailPtr;
- RxFD *RFDTailPtr;
-
- UINT64 rx_phy_addr; // physical addresses
- UINT64 tx_phy_addr;
- UINT64 stat_phy_addr;
- UINT64 MemoryPtr;
- UINT64 Mapped_MemoryPtr;
-
- UINT64 xmit_done[TX_BUFFER_COUNT << 1]; // circular buffer
- UINT16 xmit_done_head; // index into the xmit_done array
- UINT16 xmit_done_tail; // where are we filling now (index into xmit_done)
- UINT16 cur_rx_ind; // current RX Q head index
- UINT16 FreeCBCount;
-
- BOOLEAN in_interrupt;
- BOOLEAN in_transmit;
- BOOLEAN Receive_Started;
- UINT8 Rx_Filter;
- UINT8 VersionFlag; // UNDI30 or UNDI31??
- UINT8 rsvd[3];
-
- struct mc{
- UINT16 reserved [3]; // padding for this structure to make it 8 byte aligned
- UINT16 list_len;
- UINT8 mc_list[MAX_MCAST_ADDRESS_CNT][PXE_MAC_LENGTH]; // 8*32 is the size
- } mcast_list;
-
- UINT64 Unique_ID;
-
- EFI_PCI_IO_PROTOCOL *Io_Function;
-
- VOID (*Delay_30)(UINTN); // call back routine
- VOID (*Virt2Phys_30)(UINT64 virtual_addr, UINT64 physical_ptr); // call back routine
- VOID (*Block_30)(UINT32 enable); // call back routine
- VOID (*Mem_Io_30)(UINT8 read_write, UINT8 len, UINT64 port, UINT64 buf_addr);
- VOID (*Delay)(UINT64, UINTN); // call back routine
- VOID (*Virt2Phys)(UINT64 unq_id, UINT64 virtual_addr, UINT64 physical_ptr); // call back routine
- VOID (*Block)(UINT64 unq_id, UINT32 enable); // call back routine
- VOID (*Mem_Io)(UINT64 unq_id, UINT8 read_write, UINT8 len, UINT64 port,
- UINT64 buf_addr);
- VOID (*Map_Mem)(UINT64 unq_id, UINT64 virtual_addr, UINT32 size,
- UINT32 Direction, UINT64 mapped_addr);
- VOID (*UnMap_Mem)(UINT64 unq_id, UINT64 virtual_addr, UINT32 size,
- UINT32 Direction, UINT64 mapped_addr);
- VOID (*Sync_Mem)(UINT64 unq_id, UINT64 virtual_addr,
- UINT32 size, UINT32 Direction, UINT64 mapped_addr);
-} NIC_DATA_INSTANCE;
-
-#pragma pack(1)
-struct MC_CB_STRUCT{
- UINT16 count;
- UINT8 m_list[MAX_MCAST_ADDRESS_CNT][ETHER_MAC_ADDR_LEN];
-};
-#pragma pack()
-
-#define FOUR_GIGABYTE (UINT64)0x100000000ULL
|