1. retired NicIp4ConfigProtocolGuid

2. moved NicIp4ConfigVariableGuid to Include/Guid/NicIp4ConfigNvData.h
3. updated Ip4ConfigDxe module to publish one setup page to Get/Set network parameters. Also, Ip4ConfgiDxe installed EFI HII Config Access protocol for each network devices. 

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8309 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 0 insertions, 177 deletions

diff --git a/MdeModulePkg/Include/Protocol/NicIp4Config.h b/MdeModulePkg/Include/Protocol/NicIp4Config.h
deleted file mode 100644
index 28284febda..0000000000
--- a/MdeModulePkg/Include/Protocol/NicIp4Config.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/** @file

-  This file defines NicIp4Config Protocol.

-  EFI_NIC_IP4_CONFIG_PROTOCOL is a proprietary protocol, not defined by UEFI2.0.

-

-Copyright (c) 2006 - 2008, Intel Corporation

-All rights reserved. This program and the accompanying materials

-are licensed and made available under the terms and conditions of the BSD License

-which accompanies this distribution.  The full text of the license may be found at

-http://opensource.org/licenses/bsd-license.php

-

-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-

-**/

-

-#ifndef __NIC_IP4_CONFIG_H__

-#define __NIC_IP4_CONFIG_H__

-

-#include <Protocol/Ip4Config.h>

-

-

-#define EFI_NIC_IP4_CONFIG_PROTOCOL_GUID \

-  { \

-    0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 } \

-  }

-

-#define EFI_NIC_IP4_CONFIG_VARIABLE_GUID \

-  { \

-    0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b } \

-  }

-

-#define EFI_NIC_IP4_CONFIG_VARIABLE          L"EfiNicIp4ConfigVariable"

-

-

-typedef struct _EFI_NIC_IP4_CONFIG_PROTOCOL EFI_NIC_IP4_CONFIG_PROTOCOL;

-

-typedef enum {

-  //

-  // Config source: dhcp or static

-  //

-  IP4_CONFIG_SOURCE_DHCP     = 0,

-  IP4_CONFIG_SOURCE_STATIC,

-  IP4_CONFIG_SOURCE_MAX,

-

-  IP4_NIC_NAME_LENGTH        = 64,

-  MAX_IP4_CONFIG_IN_VARIABLE = 16

-} IP4_CONFIG_TYPE;

-

-//

-// The following structures are used by drivers/applications other

-// than EFI_IP4_PROTOCOL, such as ifconfig shell application, to

-// communicate the IP configuration information to EFI_IP4_CONFIG_PROTOCOL.

-// EFI_IP4_CONFIG_PROTOCOL in turn is used by EFI_IP4_PROTOCOL to get

-// the default IP4 configuration. ifconfig can't use the EFI_IP4_PROTOCOL

-// because it don't know how to configure the default IP address even

-// it has got the address.

-//

-

-///

-/// NIC_ADDR contains the interface's type and MAC address to identify

-/// a specific NIC.

-///

-typedef struct {

-  UINT16                    Type;       ///< Interface type

-  UINT8                     Len;        ///< Length of MAC address

-  EFI_MAC_ADDRESS           MacAddr;    ///< MAC address of interface

-} NIC_ADDR;

-

-///

-/// NIC_IP4_CONFIG_INFO contains the IP4 configure

-/// parameters for that NIC. NIC_IP4_CONFIG_INFO is

-/// of variable length.

-///

-typedef struct {

-  NIC_ADDR                  NicAddr;    ///< Link layer address to identify the NIC

-  UINT32                    Source;     ///< Static or DHCP

-  BOOLEAN                   Perment;    ///< Survive the reboot or not

-  EFI_IP4_IPCONFIG_DATA     Ip4Info;    ///< IP addresses

-} NIC_IP4_CONFIG_INFO;

-

-///

-/// IP4_CONFIG_VARIABLE is the EFI variable to

-/// save the configuration. IP4_CONFIG_VARIABLE is

-/// of variable length.

-///

-typedef struct {

-  UINT32                    Len;        ///< Total length of the variable

-  UINT16                    CheckSum;   ///< CheckSum, the same as IP4 head checksum

-  UINT32                    Count;      ///< Number of NIC_IP4_CONFIG_INFO follows

-  NIC_IP4_CONFIG_INFO       ConfigInfo;

-} IP4_CONFIG_VARIABLE;

-

-/**

-  Get the configure parameter for this NIC.

-

-  @param  This                   The NIC IP4 CONFIG protocol.

-  @param  Len                    The length of the NicConfig buffer.

-  @param  NicConfig              The buffer to receive the NIC's configure

-                                 parameter.

-

-  @retval EFI_SUCCESS            The configure parameter for this NIC was 

-                                 obtained successfully .

-  @retval EFI_INVALID_PARAMETER  This or ConfigLen is NULL.

-  @retval EFI_NOT_FOUND          There is no configure parameter for the NIC in

-                                 NVRam.

-  @retval EFI_BUFFER_TOO_SMALL   The ConfigLen is too small or the NicConfig is 

-                                 NULL.

-

-**/

-typedef

-EFI_STATUS

-(EFIAPI *EFI_NIC_IP4_CONFIG_GET_INFO)(

-  IN EFI_NIC_IP4_CONFIG_PROTOCOL  *This,

-  IN OUT UINTN                    *Len,

-  OUT NIC_IP4_CONFIG_INFO         *NicConfig     OPTIONAL

-  );

-

-/**

-  Set the IP configure parameters for this NIC. 

-

-  If Reconfig is TRUE, the IP driver will be informed to discard current 

-  auto configure parameter and restart the auto configuration process. 

-  If current there is a pending auto configuration, EFI_ALREADY_STARTED is

-  returned. You can only change the configure setting when either

-  the configure has finished or not started yet. If NicConfig, the

-  NIC's configure parameter is removed from the variable.

-

-  @param  This                   The NIC IP4 CONFIG protocol

-  @param  NicConfig              The new NIC IP4 configure parameter

-  @param  Reconfig               Inform the IP4 driver to restart the auto

-                                 configuration

-                                 

-  @retval EFI_SUCCESS            The configure parameter for this NIC was 

-                                 set successfully .

-  @retval EFI_INVALID_PARAMETER  This is NULL or the configure parameter is

-                                 invalid.

-  @retval EFI_ALREADY_STARTED    There is a pending auto configuration.

-  @retval EFI_NOT_FOUND          No auto configure parameter is found

-

-**/

-typedef

-EFI_STATUS

-(EFIAPI *EFI_NIC_IP4_CONFIG_SET_INFO)(

-  IN EFI_NIC_IP4_CONFIG_PROTOCOL  *This,

-  IN NIC_IP4_CONFIG_INFO          *NicConfig     OPTIONAL,

-  IN BOOLEAN                      ReConfig

-  );

-

-/**

-  Return the name and MAC address for the NIC. The Name, if not NULL,

-  has at least IP4_NIC_NAME_LENGTH bytes.

-

-  @param  This                   The NIC IP4 CONFIG protocol

-  @param  Name                   The buffer to return the name

-  @param  NicAddr                The buffer to return the MAC addr

-

-  @retval EFI_INVALID_PARAMETER  This is NULL

-  @retval EFI_SUCCESS            The name or address of the NIC are returned.

-

-**/

-typedef

-EFI_STATUS

-(EFIAPI *EFI_NIC_IP4_CONFIG_GET_NAME)(

-  IN  EFI_NIC_IP4_CONFIG_PROTOCOL *This,

-  OUT  UINT16                     *Name          OPTIONAL,

-  OUT  NIC_ADDR                   *NicAddr       OPTIONAL

-  );

-

-struct _EFI_NIC_IP4_CONFIG_PROTOCOL {

-  EFI_NIC_IP4_CONFIG_GET_NAME     GetName;

-  EFI_NIC_IP4_CONFIG_GET_INFO     GetInfo;

-  EFI_NIC_IP4_CONFIG_SET_INFO     SetInfo;

-};

-

-extern EFI_GUID gEfiNicIp4ConfigVariableGuid;

-extern EFI_GUID gEfiNicIp4ConfigProtocolGuid;

-#endif