Remove incorrect ScsiIo.h

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@3858 6f19259b-4bc3-4df7-8a09-765794883524

2 files changed, 0 insertions, 324 deletions

diff --git a/MdeModulePkg/Include/Protocol/ScsiIo.h b/MdeModulePkg/Include/Protocol/ScsiIo.h
deleted file mode 100644
index 4e3a170de0..0000000000
--- a/MdeModulePkg/Include/Protocol/ScsiIo.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*++

-

-Copyright (c) 2006, Intel Corporation

-All rights reserved. This program and the accompanying materials

-are licensed and made available under the terms and conditions of the BSD License

-which accompanies this distribution.  The full text of the license may be found at

-http://opensource.org/licenses/bsd-license.php

-

-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-

-Module Name:

-

-  ScsiIo.h

-

-Abstract:

-

-  SCSI I/O protocol.

-

---*/

-

-#ifndef __SCSI_IO_H__

-#define __SCSI_IO_H__

-

-#define EFI_SCSI_IO_PROTOCOL_GUID \

-  { 0x403cd195, 0xf233, 0x48ec, {0x84, 0x55, 0xb2, 0xe5, 0x2f, 0x1d, 0x9e, 0x2  } }

-

-//

-// Forward reference for pure ANSI compatability

-//

-typedef struct _EFI_SCSI_IO_PROTOCOL  EFI_SCSI_IO_PROTOCOL;

-

-//

-// SCSI Host Adapter Status definition

-//

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OK                     0x00

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND        0x09    // timeout when processing the command

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT                0x0b    // timeout when waiting for the command processing

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT         0x0d    // a message reject was received when processing command

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET              0x0e    // a bus reset was detected

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PARITY_ERROR           0x0f

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED   0x10    // the adapter failed in issuing request sense command

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT      0x11    // selection timeout

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN  0x12    // data overrun or data underrun

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE               0x13    // Unexepected bus free

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR            0x14    // Target bus phase sequence failure

-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OTHER                  0x7f

-

-

-//

-// SCSI Target Status definition

-//

-#define EFI_SCSI_IO_STATUS_TARGET_GOOD                         0x00

-#define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION              0x02    // check condition

-#define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET                0x04    // condition met

-#define EFI_SCSI_IO_STATUS_TARGET_BUSY                         0x08    // busy

-#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE                 0x10    // intermediate

-#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET   0x14    // intermediate-condition met

-#define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT         0x18    // reservation conflict

-#define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED           0x22    // command terminated

-#define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL                   0x28    // queue full

-

-typedef struct {

-  UINT64      Timeout;

-  VOID        *DataBuffer;

-  VOID        *SenseData;

-  VOID        *Cdb;

-  UINT32      TransferLength;

-  UINT8       CdbLength;

-  UINT8       DataDirection;

-  UINT8       HostAdapterStatus;

-  UINT8       TargetStatus;

-  UINT8       SenseDataLength;

-}EFI_SCSI_IO_SCSI_REQUEST_PACKET;

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE) (

-  IN EFI_SCSI_IO_PROTOCOL     *This,

-  OUT UINT8                           *DeviceType

-  )

-/*++

-

-  Routine Description:

-    Retrieves the device type information of the SCSI Controller.

-

-  Arguments:

-    This                  - Protocol instance pointer.

-    DeviceType            - A pointer to the device type information

-                            retrieved from the SCSI Controller.

-

-  Returns:

-    EFI_SUCCESS            - Retrieves the device type information successfully.

-    EFI_INVALID_PARAMETER  - The DeviceType is NULL.

---*/

-;

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION) (

-  IN EFI_SCSI_IO_PROTOCOL   *This,

-  OUT UINT32                        *Target,

-  OUT UINT64                        *Lun

-  )

-/*++

-  Routine Description:

-    Retrieves the device location in the SCSI channel.

-

-  Arguments:

-    This                  - Protocol instance pointer.

-    Target                - A pointer to the Target ID of a SCSI device

-                            on the SCSI channel.

-    Lun                    - A pointer to the LUN of the SCSI device on

-                            the SCSI channel.

-

-  Returns:

-    EFI_SUCCESS            - Retrieves the device location successfully.

-    EFI_INVALID_PARAMETER  - The Target or Lun is NULL.

---*/

-;

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_BUS) (

-  IN EFI_SCSI_IO_PROTOCOL     *This

-  )

-/*++

-

-  Routine Description:

-    Resets the SCSI Bus that the SCSI Controller is attached to.

-

-  Arguments:

-    This                  - Protocol instance pointer.

-

-  Returns:

-    EFI_SUCCESS            - The SCSI bus is reset successfully.

-    EFI_DEVICE_ERROR      - Errors encountered when resetting the SCSI bus.

-    EFI_UNSUPPORTED        - The bus reset operation is not supported by the

-                            SCSI Host Controller.

-    EFI_TIMEOUT            - A timeout occurred while attempting to reset

-                            the SCSI bus.

---*/

-;

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_DEVICE) (

-  IN EFI_SCSI_IO_PROTOCOL     *This

-  )

-/*++

-

-  Routine Description:

-    Resets the SCSI Controller that the device handle specifies.

-

-  Arguments:

-    This                  - Protocol instance pointer.

-

-

-  Returns:

-    EFI_SUCCESS            - Reset the SCSI controller successfully.

-    EFI_DEVICE_ERROR      - Errors are encountered when resetting the

-                            SCSI Controller.

-    EFI_UNSUPPORTED        - The SCSI bus does not support a device

-                            reset operation.

-    EFI_TIMEOUT            - A timeout occurred while attempting to

-                            reset the SCSI Controller.

---*/

-;

-

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD) (

-  IN EFI_SCSI_IO_PROTOCOL           *This,

-  IN OUT  EFI_SCSI_IO_SCSI_REQUEST_PACKET   *Packet,

-  IN EFI_EVENT                              Event  OPTIONAL

-  )

-/*++

-

-  Routine Description:

-    Sends a SCSI Request Packet to the SCSI Controller for execution.

-

-  Arguments:

-    This                  - Protocol instance pointer.

-    Packet                - The SCSI request packet to send to the SCSI

-                            Controller specified by the device handle.

-    Event                  - If the SCSI bus where the SCSI device is attached

-                            does not support non-blocking I/O, then Event is

-                            ignored, and blocking I/O is performed.

-                            If Event is NULL, then blocking I/O is performed.

-                            If Event is not NULL and non-blocking I/O is

-                            supported, then non-blocking I/O is performed,

-                            and Event will be signaled when the SCSI Request

-                            Packet completes.

-  Returns:

-    EFI_SUCCESS            - The SCSI Request Packet was sent by the host

-                            successfully, and TransferLength bytes were

-                            transferred to/from DataBuffer.See

-                            HostAdapterStatus, TargetStatus,

-                            SenseDataLength, and SenseData in that order

-                            for additional status information.

-    EFI_WARN_BUFFER_TOO_SMALL  - The SCSI Request Packet was executed,

-                            but the entire DataBuffer could not be transferred.

-                            The actual number of bytes transferred is returned

-                            in TransferLength. See HostAdapterStatus,

-                            TargetStatus, SenseDataLength, and SenseData in

-                            that order for additional status information.

-    EFI_NOT_READY          - The SCSI Request Packet could not be sent because

-                            there are too many SCSI Command Packets already

-                            queued.The caller may retry again later.

-    EFI_DEVICE_ERROR      - A device error occurred while attempting to send

-                            the SCSI Request Packet. See HostAdapterStatus,

-                            TargetStatus, SenseDataLength, and SenseData in

-                            that order for additional status information.

-    EFI_INVALID_PARAMETER  - The contents of CommandPacket are invalid.

-                            The SCSI Request Packet was not sent, so no

-                            additional status information is available.

-    EFI_UNSUPPORTED        - The command described by the SCSI Request Packet

-                            is not supported by the SCSI initiator(i.e., SCSI

-                            Host Controller). The SCSI Request Packet was not

-                            sent, so no additional status information is

-                            available.

-    EFI_TIMEOUT            - A timeout occurred while waiting for the SCSI

-                            Request Packet to execute. See HostAdapterStatus,

-                            TargetStatus, SenseDataLength, and SenseData in

-                            that order for additional status information.

---*/

-;

-

-struct _EFI_SCSI_IO_PROTOCOL {

-    EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE      GetDeviceType;

-    EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION  GetDeviceLocation;

-    EFI_SCSI_IO_PROTOCOL_RESET_BUS            ResetBus;

-    EFI_SCSI_IO_PROTOCOL_RESET_DEVICE         ResetDevice;

-    EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_CMD        ExecuteSCSICommand;

-};

-

-extern EFI_GUID gEfiScsiIoProtocolGuid;

-

-#endif

-

diff --git a/MdeModulePkg/Include/Protocol/usbatapi_rename.h b/MdeModulePkg/Include/Protocol/usbatapi_rename.h
deleted file mode 100644
index daa05293be..0000000000
--- a/MdeModulePkg/Include/Protocol/usbatapi_rename.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*++

-

-Copyright (c) 2006 - 2007, Intel Corporation

-All rights reserved. This program and the accompanying materials

-are licensed and made available under the terms and conditions of the BSD License

-which accompanies this distribution.  The full text of the license may be found at

-http://opensource.org/licenses/bsd-license.php

-

-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

-

-Module Name:

-

-    UsbAtapi.h

-

-Abstract:

-

-    EFI Atapi Protocol definition.

-

-Revision History

-

---*/

-

-#ifndef __EFI_USB_ATAPI_H__

-#define __EFI_USB_ATAPI_H__

-

-//

-// Transfer protocol types

-//

-#define BOT    0x50

-#define CBI0  0x00

-#define CBI1  0x01

-

-//

-// SubClass Code (defines command set)

-//

-#define EFI_USB_SUBCLASS_RBC            0x01

-#define EFI_USB_SUBCLASS_ATAPI          0x02

-#define EFI_USB_SUBCLASS_QIC_157        0x03

-#define EFI_USB_SUBCLASS_UFI            0x04

-#define EFI_USB_SUBCLASS_SFF_8070i      0x05

-#define EFI_USB_SUBCLASS_SCSI           0x06

-#define EFI_USB_SUBCLASS_RESERVED_LOW   0x07

-#define EFI_USB_SUBCLASS_RESERVED_HIGH  0xff

-//

-// Global GUID for transfer protocol interface

-//

-#define EFI_USB_ATAPI_PROTOCOL_GUID \

-    { 0x2B2F68DA, 0x0CD2, 0x44cf, {0x8E, 0x8B, 0xBB, 0xA2, 0x0B, 0x1B, 0x5B, 0x75 } }

-

-typedef struct _EFI_USB_ATAPI_PROTOCOL EFI_USB_ATAPI_PROTOCOL;

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_USB_ATAPI_PACKET_CMD) (

-  IN EFI_USB_ATAPI_PROTOCOL  *This,

-  IN  VOID                            *Command,

-  IN  UINT8                            CommandSize,

-  IN  VOID                            *DataBuffer,

-  IN  UINT32                          BufferLength,

-  IN  EFI_USB_DATA_DIRECTION          Direction,

-  IN  UINT16                          TimeOutInMilliSeconds

-);

-

-typedef

-EFI_STATUS

-(EFIAPI *EFI_USB_MASS_STORAGE_RESET) (

-  IN EFI_USB_ATAPI_PROTOCOL  *This,

-  IN  BOOLEAN                         ExtendedVerification

-);

-

-//

-//  Protocol Interface Structure

-//

-struct _EFI_USB_ATAPI_PROTOCOL {

-  EFI_USB_ATAPI_PACKET_CMD        UsbAtapiPacketCmd;

-  EFI_USB_MASS_STORAGE_RESET      UsbAtapiReset;

-  UINT32                          CommandProtocol;

-};

-

-extern EFI_GUID gEfiUsbAtapiProtocolGuid;

-

-#endif