git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10288 6f19259b-4bc3-4df7-8a09-765794883524

6 files changed, 25 insertions, 25 deletions

diff --git a/MdeModulePkg/Include/Guid/LoadModuleAtFixedAddress.h b/MdeModulePkg/Include/Guid/LoadModuleAtFixedAddress.h
index d2b01cea68..68e41cd178 100644
--- a/MdeModulePkg/Include/Guid/LoadModuleAtFixedAddress.h
+++ b/MdeModulePkg/Include/Guid/LoadModuleAtFixedAddress.h
@@ -27,8 +27,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
 extern EFI_GUID gLoadFixedAddressConfigurationTableGuid;

 

 typedef struct {

-  EFI_PHYSICAL_ADDRESS    DxeCodeTopAddress;             ///< The top address below which the Dxe runtime code and below which the Dxe runtime/boot code and PEI code.

-  EFI_PHYSICAL_ADDRESS    SmramBase;                      ///< SMM RAME base. build tool will assigned an offset relative to SMRAM base for SMM driver.

+  EFI_PHYSICAL_ADDRESS    DxeCodeTopAddress;   ///< The top address below which the Dxe runtime code and below which the Dxe runtime/boot code and PEI code.

+  EFI_PHYSICAL_ADDRESS    SmramBase;           ///< SMRAM base address. The build tool assigns an offset relative to the SMRAM base for a SMM driver.

 } EFI_LOAD_FIXED_ADDRESS_CONFIGURATION_TABLE;

 

 #endif

diff --git a/MdeModulePkg/Include/Library/IpIoLib.h b/MdeModulePkg/Include/Library/IpIoLib.h
index 09ff2c122a..b1cbacb593 100644
--- a/MdeModulePkg/Include/Library/IpIoLib.h
+++ b/MdeModulePkg/Include/Library/IpIoLib.h
@@ -529,10 +529,9 @@ IpIoFindSender (
 

   @param[in]   IcmpError             IcmpError Type.

   @param[in]   IpVersion             The version of the IP protocol to use,

-                                     either IPv4 or IPv6.

-  

-  @param[out]  IsHard                Whether it is a hard error.

-  @param[out]  Notify                Whether it need to notify SockError.

+                                     either IPv4 or IPv6. 

+  @param[out]  IsHard                If TRUE, indicates that it is a hard error.

+  @param[out]  Notify                If TRUE, SockError needs to be notified.

 

   @return The ICMP Error Status, such as EFI_NETWORK_UNREACHABLE.

 

diff --git a/MdeModulePkg/Include/Library/NetLib.h b/MdeModulePkg/Include/Library/NetLib.h
index a011bf7acb..71680a42b2 100644
--- a/MdeModulePkg/Include/Library/NetLib.h
+++ b/MdeModulePkg/Include/Library/NetLib.h
@@ -507,7 +507,7 @@ NetGetUint32 (
   byte stream.

 

   @param[in, out]  Buf          The buffer in which to put the UINT32.

-  @param[in]      Data          The data to put.

+  @param[in]       Data         The data to be converted and put into the byte stream.

 

 **/

 VOID

@@ -1097,17 +1097,18 @@ NetLibGetMacString (
 

   The underlying UNDI driver may or may not support reporting media status from

   GET_STATUS command (PXE_STATFLAGS_GET_STATUS_NO_MEDIA_SUPPORTED). This routine

-  will try to invoke Snp->GetStatus() to get the media status. Iif media is already

-  present, it returns directly. If media  isnot present, it will stop SNP and then

-  restart SNP to get the latest media status.  This provides an opportunity to get 

+  will try to invoke Snp->GetStatus() to get the media status. If media is already

+  present, it returns directly. If media is not present, it will stop SNP and then

+  restart SNP to get the latest media status. This provides an opportunity to get 

   the correct media status for old UNDI driver, which doesn't support reporting 

   media status from GET_STATUS command.

   Note: there are two limitations for the current algorithm:

   1) For UNDI with this capability, when the cable is not attached, there will

      be an redundant Stop/Start() process.

-  2) For UNDI without this capability, when the cable is attached, the UNDI

-     initializes while unattached. Later, NetLibDetectMedia() will report

-     MediaPresent as TRUE, causing upper layer apps to wait for timeout time.

+  2) for UNDI without this capability, in case that network cable is attached when

+     Snp->Initialize() is invoked while network cable is unattached later,

+     NetLibDetectMedia() will report MediaPresent as TRUE, causing upper layer

+     apps to wait for timeout time.

 

   @param[in]   ServiceHandle    The handle where network service binding protocols are

                                 installed.

@@ -1868,8 +1869,8 @@ NetbufQueCopy (
   );

 

 /**

-  Trim Len bytes of data from the queue header and release any net buffer

-  that is trimmed wholely.

+  Trim Len bytes of data from the buffer queue and free any net buffer

+  that is completely trimmed.

 

   The trimming operation is the same as NetbufTrim but applies to the net buffer

   queue instead of the net buffer.

diff --git a/MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.c b/MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.c
index 9ed7b8ddfb..d5fddb678f 100644
--- a/MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.c
+++ b/MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.c
@@ -2012,10 +2012,9 @@ IpIoFindSender (
 

   @param[in]   IcmpError             IcmpError Type.

   @param[in]   IpVersion             The version of the IP protocol to use,

-                                     either IPv4 or IPv6.

-  

-  @param[out]  IsHard                Whether it is a hard error.

-  @param[out]  Notify                Whether it need to notify SockError.

+                                     either IPv4 or IPv6. 

+  @param[out]  IsHard                If TRUE, indicates that it is a hard error.

+  @param[out]  Notify                If TRUE, SockError needs to be notified.

 

   @return ICMP Error Status, such as EFI_NETWORK_UNREACHABLE.

 

diff --git a/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c b/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c
index 5037243b37..034031d09f 100644
--- a/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c
+++ b/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c
@@ -901,7 +901,7 @@ NetGetUint32 (
   byte stream.

 

   @param[in, out]  Buf          The buffer to put the UINT32.

-  @param[in]      Data          The data to put.

+  @param[in]       Data         The data to be converted and put into the byte stream.

 

 **/

 VOID

@@ -2158,9 +2158,10 @@ NetLibGetMacString (
   Note: there will be two limitations for current algorithm:

   1) for UNDI with this capability, in case of cable is not attached, there will

      be an redundant Stop/Start() process;

-  2) for UNDI without this capability, in case cable is attached in UNDI

-     initialize while unattached latter, NetLibDetectMedia() will report

-     MediaPresent as TRUE, this cause upper layer apps wait for timeout time.

+  2) for UNDI without this capability, in case that network cable is attached when

+     Snp->Initialize() is invoked while network cable is unattached later,

+     NetLibDetectMedia() will report MediaPresent as TRUE, causing upper layer

+     apps to wait for timeout time.

 

   @param[in]   ServiceHandle    The handle where network service binding protocols are

                                 installed on.

diff --git a/MdeModulePkg/Library/DxeNetLib/NetBuffer.c b/MdeModulePkg/Library/DxeNetLib/NetBuffer.c
index 76b6510659..139735e2cb 100644
--- a/MdeModulePkg/Library/DxeNetLib/NetBuffer.c
+++ b/MdeModulePkg/Library/DxeNetLib/NetBuffer.c
@@ -1556,8 +1556,8 @@ NetbufQueCopy (
 

 

 /**

-  Trim Len bytes of data from the queue header, release any of the net buffer

-  whom is trimmed wholely.

+  Trim Len bytes of data from the buffer queue and free any net buffer

+  that is completely trimmed.

 

   The trimming operation is the same as NetbufTrim but applies to the net buffer

   queue instead of the net buffer.