diff options
| author | Hao Wu <hao.a.wu@intel.com> | 2015-12-11 07:33:24 +0000 |
|---|---|---|
| committer | vanjeff <vanjeff@Edk2> | 2015-12-11 07:33:24 +0000 |
| commit | 540afa672ba3f0236835f8ef7e2030d61e56039e (patch) | |
| tree | d156c61949868ece3efae5e8130c50f7257c814f /MdePkg/Include | |
| parent | 754840385799645d6be1b589d8e3933471f7cb8a (diff) | |
| download | edk2-platforms-540afa672ba3f0236835f8ef7e2030d61e56039e.tar.xz | |
MdePkg UefiScsiLib: Add non-blocking support for SCSI Read/Write command
Four new functions are added to UefiScsiLib:
ScsiRead10CommandEx
ScsiWrite10CommandEx
ScsiRead16CommandEx
ScsiWrite16CommandEx
They support both blocking and non-blocking SCSI Read/Write operation
depending on the optional parameter 'Event' passed to those APIs.
When 'Event' is NULL, these four functions will call the non-EX version
couterparts to execute blocking SCSI I/O. When 'Event' is not NULL,
non-blocking I/O operation is executed.
(Sync patch r19214 from main trunk.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@19221 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'MdePkg/Include')
| -rw-r--r-- | MdePkg/Include/Library/UefiScsiLib.h | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/MdePkg/Include/Library/UefiScsiLib.h b/MdePkg/Include/Library/UefiScsiLib.h index 26e4aa4e0f..067acfdb43 100644 --- a/MdePkg/Include/Library/UefiScsiLib.h +++ b/MdePkg/Include/Library/UefiScsiLib.h @@ -818,4 +818,364 @@ ScsiWrite16Command ( IN UINT32 SectorSize
);
+
+/**
+ Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI
+ target.
+
+ Executes the SCSI Read(10) command on the SCSI target specified by ScsiIo.
+ When Event is NULL, blocking command will be executed. Otherwise non-blocking
+ command will be executed.
+ For blocking I/O, if Timeout is zero, this function will wait indefinitely
+ for the command to complete. If Timeout is greater than zero, then the
+ command is executed and will timeout after Timeout 100 ns units.
+ For non-blocking I/O, if Timeout is zero, Event will be signaled only after
+ the command to completes. If Timeout is greater than zero, Event will also be
+ signaled after Timeout 100 ns units.
+ The StartLba and SectorSize parameters are used to construct the CDB for this
+ SCSI command.
+
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If DataLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ @param[in] ScsiIo A pointer to SCSI IO protocol.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in, out] DataBuffer Read 16 command data.
+ @param[in, out] DataLength The length of data buffer.
+ @param[in] StartLba The start address of LBA.
+ @param[in] SectorSize The number of contiguous logical blocks
+ of data that shall be transferred.
+ @param[in] Event If the SCSI target does not support
+ non-blocking I/O, then Event is ignored,
+ and blocking I/O is performed. If Event
+ is NULL, then blocking I/O is performed.
+ If Event is not NULL and non-blocking
+ I/O is supported, then non-blocking I/O
+ is performed, and Event will be signaled
+ when the SCSI Read(10) command
+ completes.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be
+ transferred. The actual number of bytes
+ transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be
+ sent because there are too many SCSI
+ Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting
+ to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI
+ Request Packet is not supported by the
+ SCSI initiator(i.e., SCSI Host
+ Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the
+ SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet
+ are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due
+ to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiRead10CommandEx (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ IN OUT UINT32 *DataLength,
+ IN UINT32 StartLba,
+ IN UINT32 SectorSize,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+
+/**
+ Execute blocking/non-blocking Write(10) SCSI command on a specific SCSI
+ target.
+
+ Executes the SCSI Write(10) command on the SCSI target specified by ScsiIo.
+ When Event is NULL, blocking command will be executed. Otherwise non-blocking
+ command will be executed.
+ For blocking I/O, if Timeout is zero, this function will wait indefinitely
+ for the command to complete. If Timeout is greater than zero, then the
+ command is executed and will timeout after Timeout 100 ns units.
+ For non-blocking I/O, if Timeout is zero, Event will be signaled only after
+ the command to completes. If Timeout is greater than zero, Event will also be
+ signaled after Timeout 100 ns units.
+ The StartLba and SectorSize parameters are used to construct the CDB for this
+ SCSI command.
+
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If DataLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+ @param[in, out] DataLength The length of data buffer.
+ @param[in] StartLba The start address of LBA.
+ @param[in] SectorSize The number of contiguous logical blocks
+ of data that shall be transferred.
+ @param[in] Event If the SCSI target does not support
+ non-blocking I/O, then Event is ignored,
+ and blocking I/O is performed. If Event
+ is NULL, then blocking I/O is performed.
+ If Event is not NULL and non-blocking
+ I/O is supported, then non-blocking I/O
+ is performed, and Event will be signaled
+ when the SCSI Write(10) command
+ completes.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be
+ transferred. The actual number of bytes
+ transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be
+ sent because there are too many SCSI
+ Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting
+ to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI
+ Request Packet is not supported by the
+ SCSI initiator(i.e., SCSI Host
+ Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the
+ SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet
+ are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due
+ to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiWrite10CommandEx (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ IN OUT UINT32 *DataLength,
+ IN UINT32 StartLba,
+ IN UINT32 SectorSize,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+
+/**
+ Execute blocking/non-blocking Read(16) SCSI command on a specific SCSI
+ target.
+
+ Executes the SCSI Read(16) command on the SCSI target specified by ScsiIo.
+ When Event is NULL, blocking command will be executed. Otherwise non-blocking
+ command will be executed.
+ For blocking I/O, if Timeout is zero, this function will wait indefinitely
+ for the command to complete. If Timeout is greater than zero, then the
+ command is executed and will timeout after Timeout 100 ns units.
+ For non-blocking I/O, if Timeout is zero, Event will be signaled only after
+ the command to completes. If Timeout is greater than zero, Event will also be
+ signaled after Timeout 100 ns units.
+ The StartLba and SectorSize parameters are used to construct the CDB for this
+ SCSI command.
+
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If DataLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ @param[in] ScsiIo A pointer to SCSI IO protocol.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in, out] DataBuffer Read 16 command data.
+ @param[in, out] DataLength The length of data buffer.
+ @param[in] StartLba The start address of LBA.
+ @param[in] SectorSize The number of contiguous logical blocks
+ of data that shall be transferred.
+ @param[in] Event If the SCSI target does not support
+ non-blocking I/O, then Event is ignored,
+ and blocking I/O is performed. If Event
+ is NULL, then blocking I/O is performed.
+ If Event is not NULL and non-blocking
+ I/O is supported, then non-blocking I/O
+ is performed, and Event will be signaled
+ when the SCSI Read(16) command
+ completes.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be
+ transferred. The actual number of bytes
+ transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be
+ sent because there are too many SCSI
+ Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting
+ to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI
+ Request Packet is not supported by the
+ SCSI initiator(i.e., SCSI Host
+ Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the
+ SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet
+ are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due
+ to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiRead16CommandEx (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ IN OUT UINT32 *DataLength,
+ IN UINT64 StartLba,
+ IN UINT32 SectorSize,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+
+/**
+ Execute blocking/non-blocking Write(16) SCSI command on a specific SCSI
+ target.
+
+ Executes the SCSI Write(16) command on the SCSI target specified by ScsiIo.
+ When Event is NULL, blocking command will be executed. Otherwise non-blocking
+ command will be executed.
+ For blocking I/O, if Timeout is zero, this function will wait indefinitely
+ for the command to complete. If Timeout is greater than zero, then the
+ command is executed and will timeout after Timeout 100 ns units.
+ For non-blocking I/O, if Timeout is zero, Event will be signaled only after
+ the command to completes. If Timeout is greater than zero, Event will also be
+ signaled after Timeout 100 ns units.
+ The StartLba and SectorSize parameters are used to construct the CDB for this
+ SCSI command.
+
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If DataLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet
+ buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
+ EFI_INVALID_PARAMETER gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+ @param[in, out] DataLength The length of data buffer.
+ @param[in] StartLba The start address of LBA.
+ @param[in] SectorSize The number of contiguous logical blocks
+ of data that shall be transferred.
+ @param[in] Event If the SCSI target does not support
+ non-blocking I/O, then Event is ignored,
+ and blocking I/O is performed. If Event
+ is NULL, then blocking I/O is performed.
+ If Event is not NULL and non-blocking
+ I/O is supported, then non-blocking I/O
+ is performed, and Event will be signaled
+ when the SCSI Write(16) command
+ completes.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be
+ transferred. The actual number of bytes
+ transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be
+ sent because there are too many SCSI
+ Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting
+ to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI
+ Request Packet is not supported by the
+ SCSI initiator(i.e., SCSI Host
+ Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the
+ SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet
+ are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due
+ to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiWrite16CommandEx (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ IN OUT UINT32 *DataLength,
+ IN UINT64 StartLba,
+ IN UINT32 SectorSize,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
#endif
|