diff options
author | Guo Mang <mang.guo@intel.com> | 2016-12-22 18:25:16 +0800 |
---|---|---|
committer | Guo Mang <mang.guo@intel.com> | 2016-12-26 19:15:00 +0800 |
commit | b09f315e8d325ba5a2a91b8a0828c9564a5a36b5 (patch) | |
tree | a607bec3c86af69fe1467bf616be9824b4ada1b9 /Omap35xxPkg/Flash | |
parent | 709a7d8e49bfd9dd1f107c18e3139fa76f23175d (diff) | |
download | edk2-platforms-b09f315e8d325ba5a2a91b8a0828c9564a5a36b5.tar.xz |
Omap35xxPkg: Remove unused Package
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>
Diffstat (limited to 'Omap35xxPkg/Flash')
-rw-r--r-- | Omap35xxPkg/Flash/Flash.c | 774 | ||||
-rw-r--r-- | Omap35xxPkg/Flash/Flash.h | 106 | ||||
-rw-r--r-- | Omap35xxPkg/Flash/Flash.inf | 48 |
3 files changed, 0 insertions, 928 deletions
diff --git a/Omap35xxPkg/Flash/Flash.c b/Omap35xxPkg/Flash/Flash.c deleted file mode 100644 index b8de109d87..0000000000 --- a/Omap35xxPkg/Flash/Flash.c +++ /dev/null @@ -1,774 +0,0 @@ -/** @file
-
- Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Flash.h"
-
-NAND_PART_INFO_TABLE gNandPartInfoTable[1] = {
- { 0x2C, 0xBA, 17, 11 }
-};
-
-NAND_FLASH_INFO *gNandFlashInfo = NULL;
-UINT8 *gEccCode;
-UINTN gNum512BytesChunks = 0;
-
-//
-
-// Device path for SemiHosting. It contains our autogened Caller ID GUID.
-
-//
-
-typedef struct {
-
- VENDOR_DEVICE_PATH Guid;
-
- EFI_DEVICE_PATH_PROTOCOL End;
-
-} FLASH_DEVICE_PATH;
-
-
-
-FLASH_DEVICE_PATH gDevicePath = {
- {
- { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, { sizeof (VENDOR_DEVICE_PATH), 0 } },
- EFI_CALLER_ID_GUID
- },
- { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0} }
-};
-
-
-
-//Actual page address = Column address + Page address + Block address.
-UINTN
-GetActualPageAddressInBytes (
- UINTN BlockIndex,
- UINTN PageIndex
-)
-{
- //BlockAddressStart = Start of the Block address in actual NAND
- //PageAddressStart = Start of the Page address in actual NAND
- return ((BlockIndex << gNandFlashInfo->BlockAddressStart) + (PageIndex << gNandFlashInfo->PageAddressStart));
-}
-
-VOID
-NandSendCommand (
- UINT8 Command
-)
-{
- MmioWrite16(GPMC_NAND_COMMAND_0, Command);
-}
-
-VOID
-NandSendAddress (
- UINT8 Address
-)
-{
- MmioWrite16(GPMC_NAND_ADDRESS_0, Address);
-}
-
-UINT16
-NandReadStatus (
- VOID
- )
-{
- //Send READ STATUS command
- NandSendCommand(READ_STATUS_CMD);
-
- //Read status.
- return MmioRead16(GPMC_NAND_DATA_0);
-}
-
-VOID
-NandSendAddressCycles (
- UINTN Address
-)
-{
- //Column address
- NandSendAddress(Address & 0xff);
- Address >>= 8;
-
- //Column address
- NandSendAddress(Address & 0x07);
- Address >>= 3;
-
- //Page and Block address
- NandSendAddress(Address & 0xff);
- Address >>= 8;
-
- //Block address
- NandSendAddress(Address & 0xff);
- Address >>= 8;
-
- //Block address
- NandSendAddress(Address & 0x01);
-}
-
-VOID
-GpmcInit (
- VOID
- )
-{
- //Enable Smart-idle mode.
- MmioWrite32 (GPMC_SYSCONFIG, SMARTIDLEMODE);
-
- //Set IRQSTATUS and IRQENABLE to the reset value
- MmioWrite32 (GPMC_IRQSTATUS, 0x0);
- MmioWrite32 (GPMC_IRQENABLE, 0x0);
-
- //Disable GPMC timeout control.
- MmioWrite32 (GPMC_TIMEOUT_CONTROL, TIMEOUTDISABLE);
-
- //Set WRITEPROTECT bit to enable write access.
- MmioWrite32 (GPMC_CONFIG, WRITEPROTECT_HIGH);
-
- //NOTE: Following GPMC_CONFIGi_0 register settings are taken from u-boot memory dump.
- MmioWrite32 (GPMC_CONFIG1_0, DEVICETYPE_NAND | DEVICESIZE_X16);
- MmioWrite32 (GPMC_CONFIG2_0, CSRDOFFTIME | CSWROFFTIME);
- MmioWrite32 (GPMC_CONFIG3_0, ADVRDOFFTIME | ADVWROFFTIME);
- MmioWrite32 (GPMC_CONFIG4_0, OEONTIME | OEOFFTIME | WEONTIME | WEOFFTIME);
- MmioWrite32 (GPMC_CONFIG5_0, RDCYCLETIME | WRCYCLETIME | RDACCESSTIME | PAGEBURSTACCESSTIME);
- MmioWrite32 (GPMC_CONFIG6_0, WRACCESSTIME | WRDATAONADMUXBUS | CYCLE2CYCLEDELAY | CYCLE2CYCLESAMECSEN);
- MmioWrite32 (GPMC_CONFIG7_0, MASKADDRESS_128MB | CSVALID | BASEADDRESS);
-}
-
-EFI_STATUS
-NandDetectPart (
- VOID
-)
-{
- UINT8 NandInfo = 0;
- UINT8 PartInfo[5];
- UINTN Index;
- BOOLEAN Found = FALSE;
-
- //Send READ ID command
- NandSendCommand(READ_ID_CMD);
-
- //Send one address cycle.
- NandSendAddress(0);
-
- //Read 5-bytes to idenfity code programmed into the NAND flash devices.
- //BYTE 0 = Manufacture ID
- //Byte 1 = Device ID
- //Byte 2, 3, 4 = Nand part specific information (Page size, Block size etc)
- for (Index = 0; Index < sizeof(PartInfo); Index++) {
- PartInfo[Index] = MmioRead16(GPMC_NAND_DATA_0);
- }
-
- //Check if the ManufactureId and DeviceId are part of the currently supported nand parts.
- for (Index = 0; Index < sizeof(gNandPartInfoTable)/sizeof(NAND_PART_INFO_TABLE); Index++) {
- if (gNandPartInfoTable[Index].ManufactureId == PartInfo[0] && gNandPartInfoTable[Index].DeviceId == PartInfo[1]) {
- gNandFlashInfo->BlockAddressStart = gNandPartInfoTable[Index].BlockAddressStart;
- gNandFlashInfo->PageAddressStart = gNandPartInfoTable[Index].PageAddressStart;
- Found = TRUE;
- break;
- }
- }
-
- if (Found == FALSE) {
- DEBUG ((EFI_D_ERROR, "Nand part is not currently supported. Manufacture id: %x, Device id: %x\n", PartInfo[0], PartInfo[1]));
- return EFI_NOT_FOUND;
- }
-
- //Populate NAND_FLASH_INFO based on the result of READ ID command.
- gNandFlashInfo->ManufactureId = PartInfo[0];
- gNandFlashInfo->DeviceId = PartInfo[1];
- NandInfo = PartInfo[3];
-
- if (PAGE_SIZE(NandInfo) == PAGE_SIZE_2K_VAL) {
- gNandFlashInfo->PageSize = PAGE_SIZE_2K;
- } else {
- DEBUG ((EFI_D_ERROR, "Unknown Page size.\n"));
- return EFI_DEVICE_ERROR;
- }
-
- if (SPARE_AREA_SIZE(NandInfo) == SPARE_AREA_SIZE_64B_VAL) {
- gNandFlashInfo->SparePageSize = SPARE_AREA_SIZE_64B;
- } else {
- DEBUG ((EFI_D_ERROR, "Unknown Spare area size.\n"));
- return EFI_DEVICE_ERROR;
- }
-
- if (BLOCK_SIZE(NandInfo) == BLOCK_SIZE_128K_VAL) {
- gNandFlashInfo->BlockSize = BLOCK_SIZE_128K;
- } else {
- DEBUG ((EFI_D_ERROR, "Unknown Block size.\n"));
- return EFI_DEVICE_ERROR;
- }
-
- if (ORGANIZATION(NandInfo) == ORGANIZATION_X8) {
- gNandFlashInfo->Organization = 0;
- } else if (ORGANIZATION(NandInfo) == ORGANIZATION_X16) {
- gNandFlashInfo->Organization = 1;
- }
-
- //Calculate total number of blocks.
- gNandFlashInfo->NumPagesPerBlock = DivU64x32(gNandFlashInfo->BlockSize, gNandFlashInfo->PageSize);
-
- return EFI_SUCCESS;
-}
-
-VOID
-NandConfigureEcc (
- VOID
- )
-{
- //Define ECC size 0 and size 1 to 512 bytes
- MmioWrite32 (GPMC_ECC_SIZE_CONFIG, (ECCSIZE0_512BYTES | ECCSIZE1_512BYTES));
-}
-
-VOID
-NandEnableEcc (
- VOID
- )
-{
- //Clear all the ECC result registers and select ECC result register 1
- MmioWrite32 (GPMC_ECC_CONTROL, (ECCCLEAR | ECCPOINTER_REG1));
-
- //Enable ECC engine on CS0
- MmioWrite32 (GPMC_ECC_CONFIG, (ECCENABLE | ECCCS_0 | ECC16B));
-}
-
-VOID
-NandDisableEcc (
- VOID
- )
-{
- //Turn off ECC engine.
- MmioWrite32 (GPMC_ECC_CONFIG, ECCDISABLE);
-}
-
-VOID
-NandCalculateEcc (
- VOID
- )
-{
- UINTN Index;
- UINTN EccResultRegister;
- UINTN EccResult;
-
- //Capture 32-bit ECC result for each 512-bytes chunk.
- //In our case PageSize is 2K so read ECC1-ECC4 result registers and
- //generate total of 12-bytes of ECC code for the particular page.
-
- EccResultRegister = GPMC_ECC1_RESULT;
-
- for (Index = 0; Index < gNum512BytesChunks; Index++) {
-
- EccResult = MmioRead32 (EccResultRegister);
-
- //Calculate ECC code from 32-bit ECC result value.
- //NOTE: Following calculation is not part of TRM. We got this information
- //from Beagleboard mailing list.
- gEccCode[Index * 3] = EccResult & 0xFF;
- gEccCode[(Index * 3) + 1] = (EccResult >> 16) & 0xFF;
- gEccCode[(Index * 3) + 2] = (((EccResult >> 20) & 0xF0) | ((EccResult >> 8) & 0x0F));
-
- //Point to next ECC result register.
- EccResultRegister += 4;
- }
-}
-
-EFI_STATUS
-NandReadPage (
- IN UINTN BlockIndex,
- IN UINTN PageIndex,
- OUT VOID *Buffer,
- OUT UINT8 *SpareBuffer
-)
-{
- UINTN Address;
- UINTN Index;
- UINTN NumMainAreaWords = (gNandFlashInfo->PageSize/2);
- UINTN NumSpareAreaWords = (gNandFlashInfo->SparePageSize/2);
- UINT16 *MainAreaWordBuffer = Buffer;
- UINT16 *SpareAreaWordBuffer = (UINT16 *)SpareBuffer;
- UINTN Timeout = MAX_RETRY_COUNT;
-
- //Generate device address in bytes to access specific block and page index
- Address = GetActualPageAddressInBytes(BlockIndex, PageIndex);
-
- //Send READ command
- NandSendCommand(PAGE_READ_CMD);
-
- //Send 5 Address cycles to access specific device address
- NandSendAddressCycles(Address);
-
- //Send READ CONFIRM command
- NandSendCommand(PAGE_READ_CONFIRM_CMD);
-
- //Poll till device is busy.
- while (Timeout) {
- if ((NandReadStatus() & NAND_READY) == NAND_READY) {
- break;
- }
- Timeout--;
- }
-
- if (Timeout == 0) {
- DEBUG ((EFI_D_ERROR, "Read page timed out.\n"));
- return EFI_TIMEOUT;
- }
-
- //Reissue READ command
- NandSendCommand(PAGE_READ_CMD);
-
- //Enable ECC engine.
- NandEnableEcc();
-
- //Read data into the buffer.
- for (Index = 0; Index < NumMainAreaWords; Index++) {
- *MainAreaWordBuffer++ = MmioRead16(GPMC_NAND_DATA_0);
- }
-
- //Read spare area into the buffer.
- for (Index = 0; Index < NumSpareAreaWords; Index++) {
- *SpareAreaWordBuffer++ = MmioRead16(GPMC_NAND_DATA_0);
- }
-
- //Calculate ECC.
- NandCalculateEcc();
-
- //Turn off ECC engine.
- NandDisableEcc();
-
- //Perform ECC correction.
- //Need to implement..
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NandWritePage (
- IN UINTN BlockIndex,
- IN UINTN PageIndex,
- OUT VOID *Buffer,
- IN UINT8 *SpareBuffer
-)
-{
- UINTN Address;
- UINT16 *MainAreaWordBuffer = Buffer;
- UINT16 *SpareAreaWordBuffer = (UINT16 *)SpareBuffer;
- UINTN Index;
- UINTN NandStatus;
- UINTN Timeout = MAX_RETRY_COUNT;
-
- //Generate device address in bytes to access specific block and page index
- Address = GetActualPageAddressInBytes(BlockIndex, PageIndex);
-
- //Send SERIAL DATA INPUT command
- NandSendCommand(PROGRAM_PAGE_CMD);
-
- //Send 5 Address cycles to access specific device address
- NandSendAddressCycles(Address);
-
- //Enable ECC engine.
- NandEnableEcc();
-
- //Data input from Buffer
- for (Index = 0; Index < (gNandFlashInfo->PageSize/2); Index++) {
- MmioWrite16(GPMC_NAND_DATA_0, *MainAreaWordBuffer++);
-
- //After each write access, device has to wait to accept data.
- //Currently we may not be programming proper timing parameters to
- //the GPMC_CONFIGi_0 registers and we would need to figure that out.
- //Without following delay, page programming fails.
- gBS->Stall(1);
- }
-
- //Calculate ECC.
- NandCalculateEcc();
-
- //Turn off ECC engine.
- NandDisableEcc();
-
- //Prepare Spare area buffer with ECC codes.
- SetMem(SpareBuffer, gNandFlashInfo->SparePageSize, 0xFF);
- CopyMem(&SpareBuffer[ECC_POSITION], gEccCode, gNum512BytesChunks * 3);
-
- //Program spare area with calculated ECC.
- for (Index = 0; Index < (gNandFlashInfo->SparePageSize/2); Index++) {
- MmioWrite16(GPMC_NAND_DATA_0, *SpareAreaWordBuffer++);
- }
-
- //Send PROGRAM command
- NandSendCommand(PROGRAM_PAGE_CONFIRM_CMD);
-
- //Poll till device is busy.
- NandStatus = 0;
- while (Timeout) {
- NandStatus = NandReadStatus();
- if ((NandStatus & NAND_READY) == NAND_READY) {
- break;
- }
- Timeout--;
- }
-
- if (Timeout == 0) {
- DEBUG ((EFI_D_ERROR, "Program page timed out.\n"));
- return EFI_TIMEOUT;
- }
-
- //Bit0 indicates Pass/Fail status
- if (NandStatus & NAND_FAILURE) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NandEraseBlock (
- IN UINTN BlockIndex
-)
-{
- UINTN Address;
- UINTN NandStatus;
- UINTN Timeout = MAX_RETRY_COUNT;
-
- //Generate device address in bytes to access specific block and page index
- Address = GetActualPageAddressInBytes(BlockIndex, 0);
-
- //Send ERASE SETUP command
- NandSendCommand(BLOCK_ERASE_CMD);
-
- //Send 3 address cycles to device to access Page address and Block address
- Address >>= 11; //Ignore column addresses
-
- NandSendAddress(Address & 0xff);
- Address >>= 8;
-
- NandSendAddress(Address & 0xff);
- Address >>= 8;
-
- NandSendAddress(Address & 0xff);
-
- //Send ERASE CONFIRM command
- NandSendCommand(BLOCK_ERASE_CONFIRM_CMD);
-
- //Poll till device is busy.
- NandStatus = 0;
- while (Timeout) {
- NandStatus = NandReadStatus();
- if ((NandStatus & NAND_READY) == NAND_READY) {
- break;
- }
- Timeout--;
- gBS->Stall(1);
- }
-
- if (Timeout == 0) {
- DEBUG ((EFI_D_ERROR, "Erase block timed out for Block: %d.\n", BlockIndex));
- return EFI_TIMEOUT;
- }
-
- //Bit0 indicates Pass/Fail status
- if (NandStatus & NAND_FAILURE) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NandReadBlock (
- IN UINTN StartBlockIndex,
- IN UINTN EndBlockIndex,
- OUT VOID *Buffer,
- OUT VOID *SpareBuffer
-)
-{
- UINTN BlockIndex;
- UINTN PageIndex;
- EFI_STATUS Status = EFI_SUCCESS;
-
- for (BlockIndex = StartBlockIndex; BlockIndex <= EndBlockIndex; BlockIndex++) {
- //For each block read number of pages
- for (PageIndex = 0; PageIndex < gNandFlashInfo->NumPagesPerBlock; PageIndex++) {
- Status = NandReadPage(BlockIndex, PageIndex, Buffer, SpareBuffer);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- Buffer = ((UINT8 *)Buffer + gNandFlashInfo->PageSize);
- }
- }
-
- return Status;
-}
-
-EFI_STATUS
-NandWriteBlock (
- IN UINTN StartBlockIndex,
- IN UINTN EndBlockIndex,
- OUT VOID *Buffer,
- OUT VOID *SpareBuffer
- )
-{
- UINTN BlockIndex;
- UINTN PageIndex;
- EFI_STATUS Status = EFI_SUCCESS;
-
- for (BlockIndex = StartBlockIndex; BlockIndex <= EndBlockIndex; BlockIndex++) {
- //Page programming.
- for (PageIndex = 0; PageIndex < gNandFlashInfo->NumPagesPerBlock; PageIndex++) {
- Status = NandWritePage(BlockIndex, PageIndex, Buffer, SpareBuffer);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- Buffer = ((UINT8 *)Buffer + gNandFlashInfo->PageSize);
- }
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NandFlashReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- UINTN BusyStall = 50; // microSeconds
- UINTN ResetBusyTimeout = (1000000 / BusyStall); // 1 Second
-
- //Send RESET command to device.
- NandSendCommand(RESET_CMD);
-
- //Wait for 1ms before we check status register.
- gBS->Stall(1000);
-
- //Check BIT#5 & BIT#6 in Status register to make sure RESET is done.
- while ((NandReadStatus() & NAND_RESET_STATUS) != NAND_RESET_STATUS) {
-
- //In case of extended verification, wait for extended amount of time
- //to make sure device is reset.
- if (ExtendedVerification) {
- if (ResetBusyTimeout == 0) {
- return EFI_DEVICE_ERROR;
- }
-
- gBS->Stall(BusyStall);
- ResetBusyTimeout--;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-NandFlashReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
- UINTN NumBlocks;
- UINTN EndBlockIndex;
- EFI_STATUS Status;
- UINT8 *SpareBuffer = NULL;
-
- if (Buffer == NULL) {
- Status = EFI_INVALID_PARAMETER;
- goto exit;
- }
-
- if (Lba > LAST_BLOCK) {
- Status = EFI_INVALID_PARAMETER;
- goto exit;
- }
-
- if ((BufferSize % gNandFlashInfo->BlockSize) != 0) {
- Status = EFI_BAD_BUFFER_SIZE;
- goto exit;
- }
-
- NumBlocks = DivU64x32(BufferSize, gNandFlashInfo->BlockSize);
- EndBlockIndex = ((UINTN)Lba + NumBlocks) - 1;
-
- SpareBuffer = (UINT8 *)AllocatePool(gNandFlashInfo->SparePageSize);
- if (SpareBuffer == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto exit;
- }
-
- //Read block
- Status = NandReadBlock((UINTN)Lba, EndBlockIndex, Buffer, SpareBuffer);
- if (EFI_ERROR(Status)) {
- DEBUG((EFI_D_ERROR, "Read block fails: %x\n", Status));
- goto exit;
- }
-
-exit:
- if (SpareBuffer != NULL) {
- FreePool (SpareBuffer);
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NandFlashWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSize,
- IN VOID *Buffer
- )
-{
- UINTN BlockIndex;
- UINTN NumBlocks;
- UINTN EndBlockIndex;
- EFI_STATUS Status;
- UINT8 *SpareBuffer = NULL;
-
- if (Buffer == NULL) {
- Status = EFI_INVALID_PARAMETER;
- goto exit;
- }
-
- if (Lba > LAST_BLOCK) {
- Status = EFI_INVALID_PARAMETER;
- goto exit;
- }
-
- if ((BufferSize % gNandFlashInfo->BlockSize) != 0) {
- Status = EFI_BAD_BUFFER_SIZE;
- goto exit;
- }
-
- NumBlocks = DivU64x32(BufferSize, gNandFlashInfo->BlockSize);
- EndBlockIndex = ((UINTN)Lba + NumBlocks) - 1;
-
- SpareBuffer = (UINT8 *)AllocatePool(gNandFlashInfo->SparePageSize);
- if (SpareBuffer == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto exit;
- }
-
- // Erase block
- for (BlockIndex = (UINTN)Lba; BlockIndex <= EndBlockIndex; BlockIndex++) {
- Status = NandEraseBlock(BlockIndex);
- if (EFI_ERROR(Status)) {
- DEBUG((EFI_D_ERROR, "Erase block failed. Status: %x\n", Status));
- goto exit;
- }
- }
-
- // Program data
- Status = NandWriteBlock((UINTN)Lba, EndBlockIndex, Buffer, SpareBuffer);
- if (EFI_ERROR(Status)) {
- DEBUG((EFI_D_ERROR, "Block write fails: %x\n", Status));
- goto exit;
- }
-
-exit:
- if (SpareBuffer != NULL) {
- FreePool (SpareBuffer);
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NandFlashFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- )
-{
- return EFI_SUCCESS;
-}
-
-
-
-EFI_BLOCK_IO_MEDIA gNandFlashMedia = {
- SIGNATURE_32('n','a','n','d'), // MediaId
- FALSE, // RemovableMedia
- TRUE, // MediaPresent
- FALSE, // LogicalPartition
- FALSE, // ReadOnly
- FALSE, // WriteCaching
- 0, // BlockSize
- 2, // IoAlign
- 0, // Pad
- 0 // LastBlock
-};
-
-EFI_BLOCK_IO_PROTOCOL BlockIo =
-{
- EFI_BLOCK_IO_INTERFACE_REVISION, // Revision
- &gNandFlashMedia, // *Media
- NandFlashReset, // Reset
- NandFlashReadBlocks, // ReadBlocks
- NandFlashWriteBlocks, // WriteBlocks
- NandFlashFlushBlocks // FlushBlocks
-};
-
-EFI_STATUS
-NandFlashInitialize (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- gNandFlashInfo = (NAND_FLASH_INFO *)AllocateZeroPool (sizeof(NAND_FLASH_INFO));
-
- //Initialize GPMC module.
- GpmcInit();
-
- //Reset NAND part
- NandFlashReset(&BlockIo, FALSE);
-
- //Detect NAND part and populate gNandFlashInfo structure
- Status = NandDetectPart ();
- if (EFI_ERROR(Status)) {
- DEBUG((EFI_D_ERROR, "Nand part id detection failure: Status: %x\n", Status));
- return Status;
- }
-
- //Count total number of 512Bytes chunk based on the page size.
- if (gNandFlashInfo->PageSize == PAGE_SIZE_512B) {
- gNum512BytesChunks = 1;
- } else if (gNandFlashInfo->PageSize == PAGE_SIZE_2K) {
- gNum512BytesChunks = 4;
- } else if (gNandFlashInfo->PageSize == PAGE_SIZE_4K) {
- gNum512BytesChunks = 8;
- }
-
- gEccCode = (UINT8 *)AllocatePool(gNum512BytesChunks * 3);
- if (gEccCode == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- //Configure ECC
- NandConfigureEcc ();
-
- //Patch EFI_BLOCK_IO_MEDIA structure.
- gNandFlashMedia.BlockSize = gNandFlashInfo->BlockSize;
- gNandFlashMedia.LastBlock = LAST_BLOCK;
-
- //Publish BlockIO.
- Status = gBS->InstallMultipleProtocolInterfaces (
- &ImageHandle,
- &gEfiBlockIoProtocolGuid, &BlockIo,
- &gEfiDevicePathProtocolGuid, &gDevicePath,
- NULL
- );
- return Status;
-}
-
diff --git a/Omap35xxPkg/Flash/Flash.h b/Omap35xxPkg/Flash/Flash.h deleted file mode 100644 index 46ec4db9e1..0000000000 --- a/Omap35xxPkg/Flash/Flash.h +++ /dev/null @@ -1,106 +0,0 @@ -/** @file
-
- Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef FLASH_H
-#define FLASH_H
-
-#include <Uefi.h>
-
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/IoLib.h>
-
-#include <Protocol/BlockIo.h>
-#include <Protocol/Cpu.h>
-#include <Omap3530/Omap3530.h>
-
-#define PAGE_SIZE(x) ((x) & 0x01)
-#define PAGE_SIZE_2K_VAL (0x01UL)
-
-#define SPARE_AREA_SIZE(x) (((x) >> 2) & 0x01)
-#define SPARE_AREA_SIZE_64B_VAL (0x1UL)
-
-#define BLOCK_SIZE(x) (((x) >> 4) & 0x01)
-#define BLOCK_SIZE_128K_VAL (0x01UL)
-
-#define ORGANIZATION(x) (((x) >> 6) & 0x01)
-#define ORGANIZATION_X8 (0x0UL)
-#define ORGANIZATION_X16 (0x1UL)
-
-#define PAGE_SIZE_512B (512)
-#define PAGE_SIZE_2K (2048)
-#define PAGE_SIZE_4K (4096)
-#define SPARE_AREA_SIZE_16B (16)
-#define SPARE_AREA_SIZE_64B (64)
-
-#define BLOCK_SIZE_16K (16*1024)
-#define BLOCK_SIZE_128K (128*1024)
-
-#define BLOCK_COUNT (2048)
-#define LAST_BLOCK (BLOCK_COUNT - 1)
-
-#define ECC_POSITION 2
-
-//List of commands.
-#define RESET_CMD 0xFF
-#define READ_ID_CMD 0x90
-
-#define READ_STATUS_CMD 0x70
-
-#define PAGE_READ_CMD 0x00
-#define PAGE_READ_CONFIRM_CMD 0x30
-
-#define BLOCK_ERASE_CMD 0x60
-#define BLOCK_ERASE_CONFIRM_CMD 0xD0
-
-#define PROGRAM_PAGE_CMD 0x80
-#define PROGRAM_PAGE_CONFIRM_CMD 0x10
-
-//Nand status register bit definition
-#define NAND_SUCCESS (0x0UL << 0)
-#define NAND_FAILURE BIT0
-
-#define NAND_BUSY (0x0UL << 6)
-#define NAND_READY BIT6
-
-#define NAND_RESET_STATUS (0x60UL << 0)
-
-#define MAX_RETRY_COUNT 1500
-
-
-typedef struct {
- UINT8 ManufactureId;
- UINT8 DeviceId;
- UINT8 BlockAddressStart; //Start of the Block address in actual NAND
- UINT8 PageAddressStart; //Start of the Page address in actual NAND
-} NAND_PART_INFO_TABLE;
-
-typedef struct {
- UINT8 ManufactureId;
- UINT8 DeviceId;
- UINT8 Organization; //x8 or x16
- UINT32 PageSize;
- UINT32 SparePageSize;
- UINT32 BlockSize;
- UINT32 NumPagesPerBlock;
- UINT8 BlockAddressStart; //Start of the Block address in actual NAND
- UINT8 PageAddressStart; //Start of the Page address in actual NAND
-} NAND_FLASH_INFO;
-
-#endif //FLASH_H
diff --git a/Omap35xxPkg/Flash/Flash.inf b/Omap35xxPkg/Flash/Flash.inf deleted file mode 100644 index 36e6fe45eb..0000000000 --- a/Omap35xxPkg/Flash/Flash.inf +++ /dev/null @@ -1,48 +0,0 @@ -#/** @file
-#
-# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = NandFlash
- FILE_GUID = 4d00ef14-c4e0-426b-81b7-30a00a14aad6
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
-
- ENTRY_POINT = NandFlashInitialize
-
-
-[Sources.common]
- Flash.c
-
-[Packages]
- MdePkg/MdePkg.dec
- Omap35xxPkg/Omap35xxPkg.dec
-
-[LibraryClasses]
- PcdLib
- UefiLib
- UefiDriverEntryPoint
- MemoryAllocationLib
- IoLib
-
-[Guids]
-
-[Protocols]
- gEfiBlockIoProtocolGuid
- gEfiCpuArchProtocolGuid
-
-[Pcd]
- gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset
-
-[depex]
- TRUE
|