diff options
author | Gabriel Somlo <somlo@cmu.edu> | 2015-03-26 19:06:07 +0000 |
---|---|---|
committer | lersek <lersek@Edk2> | 2015-03-26 19:06:07 +0000 |
commit | e2ab3f819f4e8165c24bd6f4fdc24ef17bdf458b (patch) | |
tree | 64b054e1b6990e7dd23a8a0112a8b7a93bb0bcf0 /OvmfPkg/PlatformPei | |
parent | 903d1fa9918844cfc25b24f4892e779bb77fa4c0 (diff) | |
download | edk2-platforms-e2ab3f819f4e8165c24bd6f4fdc24ef17bdf458b.tar.xz |
OvmfPkg: Q35: Use correct ACPI PM control register:bit
On PIIX4, function 3, the PMREGMISC register at offset 0x80, with
default value 0x00 has its bit 0 (PMIOSE) indicate whether the PM
IO space given in the PMBA register (offset 0x40) is enabled.
PMBA must be configured *before* setting this bit.
On Q35/ICH9+, function 0x1f, the equivalent role is fulfilled by
bit 7 (ACPI_EN) in the ACPI Control Register (ACPI_CNTL) at offset
0x44, also with a default value of 0x00.
Currently, OVMF hangs when Q35 reboots, because while PMBA is reset
by QEMU, the register at offset 0x80 (matching PMREGMISC on PIIX4)
is not reset, since it has a completely different meaning on LPC.
As such, the power management initialization logic in OVMF finds
the "PMIOSE" bit enabled after a reboot and decides to skip setting
PMBA. This causes the ACPI timer tick routine to read a constant
value from the wrong register, which in turn causes the ACPI delay
loop to hang indefinitely.
This patch modifies the Base[Rom]AcpiTimerLib constructors and the
PlatformPei ACPI PM init routines to use ACPI_CNTL:ACPI_EN instead
of PMREGMISC:PMIOSE when running on Q35.
Reported-by: Reza Jelveh <reza.jelveh@tuhh.de>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17076 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'OvmfPkg/PlatformPei')
-rw-r--r-- | OvmfPkg/PlatformPei/Platform.c | 31 |
1 files changed, 17 insertions, 14 deletions
diff --git a/OvmfPkg/PlatformPei/Platform.c b/OvmfPkg/PlatformPei/Platform.c index 1940e01640..5ce0a9099a 100644 --- a/OvmfPkg/PlatformPei/Platform.c +++ b/OvmfPkg/PlatformPei/Platform.c @@ -232,7 +232,8 @@ MiscInitialization ( UINT16 HostBridgeDevId;
UINTN PmCmd;
UINTN Pmba;
- UINTN PmRegMisc;
+ UINTN AcpiCtlReg;
+ UINT8 AcpiEnBit;
//
// Disable A20 Mask
@@ -250,14 +251,16 @@ MiscInitialization ( HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
- PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
- Pmba = POWER_MGMT_REGISTER_PIIX4 (0x40);
- PmRegMisc = POWER_MGMT_REGISTER_PIIX4 (0x80);
+ PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
+ Pmba = POWER_MGMT_REGISTER_PIIX4 (0x40);
+ AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (0x80); // PMREGMISC
+ AcpiEnBit = BIT0; // PIIX4_PMIOSE
break;
case INTEL_Q35_MCH_DEVICE_ID:
- PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
- Pmba = POWER_MGMT_REGISTER_Q35 (0x40);
- PmRegMisc = POWER_MGMT_REGISTER_Q35 (0x80);
+ PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
+ Pmba = POWER_MGMT_REGISTER_Q35 (0x40);
+ AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (0x44); // ACPI_CNTL
+ AcpiEnBit = BIT7; // Q35_ACPI_EN
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
@@ -268,13 +271,13 @@ MiscInitialization ( PcdSet16 (PcdOvmfHostBridgePciDevId, HostBridgeDevId);
//
- // If PMREGMISC/PMIOSE is set, assume the ACPI PMBA has been configured (for
- // example by Xen) and skip the setup here. This matches the logic in
- // AcpiTimerLibConstructor ().
+ // If the appropriate IOspace enable bit is set, assume the ACPI PMBA
+ // has been configured (e.g., by Xen) and skip the setup here.
+ // This matches the logic in AcpiTimerLibConstructor ().
//
- if ((PciRead8 (PmRegMisc) & 0x01) == 0) {
+ if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
- // The PEI phase should be exited with fully accessibe PIIX4 IO space:
+ // The PEI phase should be exited with fully accessibe ACPI PM IO space:
// 1. set PMBA
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
@@ -285,9 +288,9 @@ MiscInitialization ( PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);
//
- // 3. set PMREGMISC/PMIOSE
+ // 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
//
- PciOr8 (PmRegMisc, 0x01);
+ PciOr8 (AcpiCtlReg, AcpiEnBit);
}
}
|