diff options
author | Marcin Wojtas <mw@semihalf.com> | 2017-12-08 15:57:31 +0100 |
---|---|---|
committer | Ard Biesheuvel <ard.biesheuvel@linaro.org> | 2017-12-08 15:21:34 +0000 |
commit | a9ac0c46818954873134960d6bb304c743869327 (patch) | |
tree | 8b15278ad8bd631ed4f65daee577b7b36384fcde /Platform/Marvell/Drivers/SdMmc/XenonDxe/SdMmcPciHci.c | |
parent | 993deafa1fd81b260ae28fff3db851c6b0aa9d74 (diff) | |
download | edk2-platforms-a9ac0c46818954873134960d6bb304c743869327.tar.xz |
Marvell: Reorganize file structure
In edk2-platforms it is expected to provide a separation between
SoC and boards files in 'Silicon' and 'Platform' directories
accordingly.
This patch aligns Marvell code to this requirement with no functional
changes in the actual source files, unless required due to modified
paths. Change the supported board's files names to proper Armada70x0Db.
Also rename 'Armada' directory to 'Armada7k8k' in order to properly
refer to the SoC family and prevent confusion in future, when
adding new Armada machines. On the occasion add ARM copyright,
which was wrongly missing in the dsc.inc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Diffstat (limited to 'Platform/Marvell/Drivers/SdMmc/XenonDxe/SdMmcPciHci.c')
-rw-r--r-- | Platform/Marvell/Drivers/SdMmc/XenonDxe/SdMmcPciHci.c | 1928 |
1 files changed, 0 insertions, 1928 deletions
diff --git a/Platform/Marvell/Drivers/SdMmc/XenonDxe/SdMmcPciHci.c b/Platform/Marvell/Drivers/SdMmc/XenonDxe/SdMmcPciHci.c deleted file mode 100644 index 1f4abd18a6..0000000000 --- a/Platform/Marvell/Drivers/SdMmc/XenonDxe/SdMmcPciHci.c +++ /dev/null @@ -1,1928 +0,0 @@ -/** @file
- This driver is used to manage SD/MMC PCI host controllers which are compliance
- with SD Host Controller Simplified Specification version 3.00.
-
- It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use.
-
- Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "SdMmcPciHcDxe.h"
-
-/**
- Dump the content of SD/MMC host controller's Capability Register.
-
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] Capability The buffer to store the capability data.
- @param[in] BaseClkFreq The base clock frequency of host controller in MHz.
-
-**/
-VOID
-DumpCapabilityReg (
- IN UINT8 Slot,
- IN SD_MMC_HC_SLOT_CAP *Capability,
- IN UINT32 BaseClkFreq
- )
-{
- //
- // Dump Capability Data
- //
- DEBUG ((DEBUG_INFO, " == Slot [%d] Capability is 0x%x ==\n", Slot, Capability));
- DEBUG ((DEBUG_INFO, " Timeout Clk Freq %d%a\n", Capability->TimeoutFreq, (Capability->TimeoutUnit) ? "MHz" : "KHz"));
- if (Capability->BaseClkFreq != BaseClkFreq) {
- DEBUG ((DEBUG_INFO, " Controller register value overriden:\n"));
- }
- DEBUG ((DEBUG_INFO, " Base Clk Freq %dMHz\n", BaseClkFreq));
- DEBUG ((DEBUG_INFO, " Max Blk Len %dbytes\n", 512 * (1 << Capability->MaxBlkLen)));
- DEBUG ((DEBUG_INFO, " 8-bit Support %a\n", Capability->BusWidth8 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " ADMA2 Support %a\n", Capability->Adma2 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " HighSpeed Support %a\n", Capability->HighSpeed ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " SDMA Support %a\n", Capability->Sdma ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Suspend/Resume %a\n", Capability->SuspRes ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Voltage 3.3 %a\n", Capability->Voltage33 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Voltage 3.0 %a\n", Capability->Voltage30 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Voltage 1.8 %a\n", Capability->Voltage18 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " 64-bit Sys Bus %a\n", Capability->SysBus64 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Async Interrupt %a\n", Capability->AsyncInt ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " SlotType "));
- if (Capability->SlotType == 0x00) {
- DEBUG ((DEBUG_INFO, "%a\n", "Removable Slot"));
- } else if (Capability->SlotType == 0x01) {
- DEBUG ((DEBUG_INFO, "%a\n", "Embedded Slot"));
- } else if (Capability->SlotType == 0x02) {
- DEBUG ((DEBUG_INFO, "%a\n", "Shared Bus Slot"));
- } else {
- DEBUG ((DEBUG_INFO, "%a\n", "Reserved"));
- }
- DEBUG ((DEBUG_INFO, " SDR50 Support %a\n", Capability->Sdr50 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " SDR104 Support %a\n", Capability->Sdr104 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " DDR50 Support %a\n", Capability->Ddr50 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Driver Type A %a\n", Capability->DriverTypeA ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Driver Type C %a\n", Capability->DriverTypeC ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Driver Type D %a\n", Capability->DriverTypeD ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Driver Type 4 %a\n", Capability->DriverType4 ? "TRUE" : "FALSE"));
- if (Capability->TimerCount == 0) {
- DEBUG ((DEBUG_INFO, " Retuning TimerCnt Disabled\n", 2 * (Capability->TimerCount - 1)));
- } else {
- DEBUG ((DEBUG_INFO, " Retuning TimerCnt %dseconds\n", 2 * (Capability->TimerCount - 1)));
- }
- DEBUG ((DEBUG_INFO, " SDR50 Tuning %a\n", Capability->TuningSDR50 ? "TRUE" : "FALSE"));
- DEBUG ((DEBUG_INFO, " Retuning Mode Mode %d\n", Capability->RetuningMod + 1));
- DEBUG ((DEBUG_INFO, " Clock Multiplier M = %d\n", Capability->ClkMultiplier + 1));
- DEBUG ((DEBUG_INFO, " HS 400 %a\n", Capability->Hs400 ? "TRUE" : "FALSE"));
- return;
-}
-
-/**
- Read SlotInfo register from SD/MMC host controller pci config space.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[out] FirstBar The buffer to store the first BAR value.
- @param[out] SlotNum The buffer to store the supported slot number.
-
- @retval EFI_SUCCESS The operation succeeds.
- @retval Others The operation fails.
-
-**/
-EFI_STATUS
-EFIAPI
-SdMmcHcGetSlotInfo (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- OUT UINT8 *FirstBar,
- OUT UINT8 *SlotNum
- )
-{
- EFI_STATUS Status;
- SD_MMC_HC_SLOT_INFO SlotInfo;
-
- Status = PciIo->Pci.Read (
- PciIo,
- EfiPciIoWidthUint8,
- SD_MMC_HC_SLOT_OFFSET,
- sizeof (SlotInfo),
- &SlotInfo
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- *FirstBar = SlotInfo.FirstBar;
- *SlotNum = SlotInfo.SlotNum + 1;
- ASSERT ((*FirstBar + *SlotNum) < SD_MMC_HC_MAX_SLOT);
- return EFI_SUCCESS;
-}
-
-/**
- Read/Write specified SD/MMC host controller mmio register.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] BarIndex The BAR index of the standard PCI Configuration
- header to use as the base address for the memory
- operation to perform.
- @param[in] Offset The offset within the selected BAR to start the
- memory operation.
- @param[in] Read A boolean to indicate it's read or write operation.
- @param[in] Count The width of the mmio register in bytes.
- Must be 1, 2 , 4 or 8 bytes.
- @param[in, out] Data For read operations, the destination buffer to store
- the results. For write operations, the source buffer
- to write data from. The caller is responsible for
- having ownership of the data buffer and ensuring its
- size not less than Count bytes.
-
- @retval EFI_INVALID_PARAMETER The PciIo or Data is NULL or the Count is not valid.
- @retval EFI_SUCCESS The read/write operation succeeds.
- @retval Others The read/write operation fails.
-
-**/
-EFI_STATUS
-EFIAPI
-SdMmcHcRwMmio (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 BarIndex,
- IN UINT32 Offset,
- IN BOOLEAN Read,
- IN UINT8 Count,
- IN OUT VOID *Data
- )
-{
- EFI_STATUS Status;
-
- if ((PciIo == NULL) || (Data == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((Count != 1) && (Count != 2) && (Count != 4) && (Count != 8)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Read) {
- Status = PciIo->Mem.Read (
- PciIo,
- EfiPciIoWidthUint8,
- BarIndex,
- (UINT64) Offset,
- Count,
- Data
- );
- } else {
- Status = PciIo->Mem.Write (
- PciIo,
- EfiPciIoWidthUint8,
- BarIndex,
- (UINT64) Offset,
- Count,
- Data
- );
- }
-
- return Status;
-}
-
-/**
- Do OR operation with the value of the specified SD/MMC host controller mmio register.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] BarIndex The BAR index of the standard PCI Configuration
- header to use as the base address for the memory
- operation to perform.
- @param[in] Offset The offset within the selected BAR to start the
- memory operation.
- @param[in] Count The width of the mmio register in bytes.
- Must be 1, 2 , 4 or 8 bytes.
- @param[in] OrData The pointer to the data used to do OR operation.
- The caller is responsible for having ownership of
- the data buffer and ensuring its size not less than
- Count bytes.
-
- @retval EFI_INVALID_PARAMETER The PciIo or OrData is NULL or the Count is not valid.
- @retval EFI_SUCCESS The OR operation succeeds.
- @retval Others The OR operation fails.
-
-**/
-EFI_STATUS
-EFIAPI
-SdMmcHcOrMmio (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 BarIndex,
- IN UINT32 Offset,
- IN UINT8 Count,
- IN VOID *OrData
- )
-{
- EFI_STATUS Status;
- UINT64 Data;
- UINT64 Or;
-
- Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (Count == 1) {
- Or = *(UINT8*) OrData;
- } else if (Count == 2) {
- Or = *(UINT16*) OrData;
- } else if (Count == 4) {
- Or = *(UINT32*) OrData;
- } else if (Count == 8) {
- Or = *(UINT64*) OrData;
- } else {
- return EFI_INVALID_PARAMETER;
- }
-
- Data |= Or;
- Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, FALSE, Count, &Data);
-
- return Status;
-}
-
-/**
- Do AND operation with the value of the specified SD/MMC host controller mmio register.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] BarIndex The BAR index of the standard PCI Configuration
- header to use as the base address for the memory
- operation to perform.
- @param[in] Offset The offset within the selected BAR to start the
- memory operation.
- @param[in] Count The width of the mmio register in bytes.
- Must be 1, 2 , 4 or 8 bytes.
- @param[in] AndData The pointer to the data used to do AND operation.
- The caller is responsible for having ownership of
- the data buffer and ensuring its size not less than
- Count bytes.
-
- @retval EFI_INVALID_PARAMETER The PciIo or AndData is NULL or the Count is not valid.
- @retval EFI_SUCCESS The AND operation succeeds.
- @retval Others The AND operation fails.
-
-**/
-EFI_STATUS
-EFIAPI
-SdMmcHcAndMmio (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 BarIndex,
- IN UINT32 Offset,
- IN UINT8 Count,
- IN VOID *AndData
- )
-{
- EFI_STATUS Status;
- UINT64 Data;
- UINT64 And;
-
- Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (Count == 1) {
- And = *(UINT8*) AndData;
- } else if (Count == 2) {
- And = *(UINT16*) AndData;
- } else if (Count == 4) {
- And = *(UINT32*) AndData;
- } else if (Count == 8) {
- And = *(UINT64*) AndData;
- } else {
- return EFI_INVALID_PARAMETER;
- }
-
- Data &= And;
- Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, FALSE, Count, &Data);
-
- return Status;
-}
-
-/**
- Wait for the value of the specified MMIO register set to the test value.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] BarIndex The BAR index of the standard PCI Configuration
- header to use as the base address for the memory
- operation to perform.
- @param[in] Offset The offset within the selected BAR to start the
- memory operation.
- @param[in] Count The width of the mmio register in bytes.
- Must be 1, 2, 4 or 8 bytes.
- @param[in] MaskValue The mask value of memory.
- @param[in] TestValue The test value of memory.
-
- @retval EFI_NOT_READY The MMIO register hasn't set to the expected value.
- @retval EFI_SUCCESS The MMIO register has expected value.
- @retval Others The MMIO operation fails.
-
-**/
-EFI_STATUS
-EFIAPI
-SdMmcHcCheckMmioSet (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 BarIndex,
- IN UINT32 Offset,
- IN UINT8 Count,
- IN UINT64 MaskValue,
- IN UINT64 TestValue
- )
-{
- EFI_STATUS Status;
- UINT64 Value;
-
- //
- // Access PCI MMIO space to see if the value is the tested one.
- //
- Value = 0;
- Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Value);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- return EFI_NOT_READY;
-}
-
-/**
- Wait for the value of the specified MMIO register set to the test value.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] BarIndex The BAR index of the standard PCI Configuration
- header to use as the base address for the memory
- operation to perform.
- @param[in] Offset The offset within the selected BAR to start the
- memory operation.
- @param[in] Count The width of the mmio register in bytes.
- Must be 1, 2, 4 or 8 bytes.
- @param[in] MaskValue The mask value of memory.
- @param[in] TestValue The test value of memory.
- @param[in] Timeout The time out value for wait memory set, uses 1
- microsecond as a unit.
-
- @retval EFI_TIMEOUT The MMIO register hasn't expected value in timeout
- range.
- @retval EFI_SUCCESS The MMIO register has expected value.
- @retval Others The MMIO operation fails.
-
-**/
-EFI_STATUS
-EFIAPI
-SdMmcHcWaitMmioSet (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 BarIndex,
- IN UINT32 Offset,
- IN UINT8 Count,
- IN UINT64 MaskValue,
- IN UINT64 TestValue,
- IN UINT64 Timeout
- )
-{
- EFI_STATUS Status;
- BOOLEAN InfiniteWait;
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- while (InfiniteWait || (Timeout > 0)) {
- Status = SdMmcHcCheckMmioSet (
- PciIo,
- BarIndex,
- Offset,
- Count,
- MaskValue,
- TestValue
- );
- if (Status != EFI_NOT_READY) {
- return Status;
- }
-
- //
- // Stall for 1 microsecond.
- //
- gBS->Stall (1);
-
- Timeout--;
- }
-
- return EFI_TIMEOUT;
-}
-
-/**
- Software reset the specified SD/MMC host controller and enable all interrupts.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
-
- @retval EFI_SUCCESS The software reset executes successfully.
- @retval Others The software reset fails.
-
-**/
-EFI_STATUS
-SdMmcHcReset (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot
- )
-{
- EFI_STATUS Status;
- UINT8 SwReset;
-
- SwReset = 0xFF;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_SW_RST, FALSE, sizeof (SwReset), &SwReset);
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "SdMmcHcReset: write full 1 fails: %r\n", Status));
- return Status;
- }
-
- Status = SdMmcHcWaitMmioSet (
- PciIo,
- Slot,
- SD_MMC_HC_SW_RST,
- sizeof (SwReset),
- 0xFF,
- 0x00,
- SD_MMC_HC_GENERIC_TIMEOUT
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_INFO, "SdMmcHcReset: reset done with %r\n", Status));
- return Status;
- }
- //
- // Enable all interrupt after reset all.
- //
- Status = SdMmcHcEnableInterrupt (PciIo, Slot);
-
- return Status;
-}
-
-/**
- Set all interrupt status bits in Normal and Error Interrupt Status Enable
- register.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
-
- @retval EFI_SUCCESS The operation executes successfully.
- @retval Others The operation fails.
-
-**/
-EFI_STATUS
-SdMmcHcEnableInterrupt (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot
- )
-{
- EFI_STATUS Status;
- UINT16 IntStatus;
-
- //
- // Enable all bits in Error Interrupt Status Enable Register
- //
- IntStatus = 0xFFFF;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_ERR_INT_STS_EN, FALSE, sizeof (IntStatus), &IntStatus);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Enable all bits in Normal Interrupt Status Enable Register
- //
- IntStatus = 0xFFFF;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_NOR_INT_STS_EN, FALSE, sizeof (IntStatus), &IntStatus);
-
- return Status;
-}
-
-/**
- Get the capability data from the specified slot.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[out] Capability The buffer to store the capability data.
-
- @retval EFI_SUCCESS The operation executes successfully.
- @retval Others The operation fails.
-
-**/
-EFI_STATUS
-SdMmcHcGetCapability (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- OUT SD_MMC_HC_SLOT_CAP *Capability
- )
-{
- EFI_STATUS Status;
- UINT64 Cap;
-
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CAP, TRUE, sizeof (Cap), &Cap);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- CopyMem (Capability, &Cap, sizeof (Cap));
-
- return EFI_SUCCESS;
-}
-
-/**
- Get the maximum current capability data from the specified slot.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[out] MaxCurrent The buffer to store the maximum current capability data.
-
- @retval EFI_SUCCESS The operation executes successfully.
- @retval Others The operation fails.
-
-**/
-EFI_STATUS
-SdMmcHcGetMaxCurrent (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- OUT UINT64 *MaxCurrent
- )
-{
- EFI_STATUS Status;
-
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_MAX_CURRENT_CAP, TRUE, sizeof (UINT64), MaxCurrent);
-
- return Status;
-}
-
-/**
- Detect whether there is a SD/MMC card attached at the specified SD/MMC host controller
- slot.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 3.1 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[out] MediaPresent The pointer to the media present boolean value.
-
- @retval EFI_SUCCESS There is no media change happened.
- @retval EFI_MEDIA_CHANGED There is media change happened.
- @retval Others The detection fails.
-
-**/
-EFI_STATUS
-SdMmcHcCardDetect (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- OUT BOOLEAN *MediaPresent
- )
-{
- EFI_STATUS Status;
- UINT16 Data;
- UINT32 PresentState;
-
- //
- // Check Present State Register to see if there is a card presented.
- //
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE, sizeof (PresentState), &PresentState);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((PresentState & BIT16) != 0) {
- *MediaPresent = TRUE;
- } else {
- *MediaPresent = FALSE;
- }
-
- //
- // Check Normal Interrupt Status Register
- //
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_NOR_INT_STS, TRUE, sizeof (Data), &Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((Data & (BIT6 | BIT7)) != 0) {
- //
- // Clear BIT6 and BIT7 by writing 1 to these two bits if set.
- //
- Data &= BIT6 | BIT7;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_NOR_INT_STS, FALSE, sizeof (Data), &Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return EFI_MEDIA_CHANGED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Stop SD/MMC card clock.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 3.2.2 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
-
- @retval EFI_SUCCESS Succeed to stop SD/MMC clock.
- @retval Others Fail to stop SD/MMC clock.
-
-**/
-EFI_STATUS
-SdMmcHcStopClock (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot
- )
-{
- EFI_STATUS Status;
- UINT32 PresentState;
- UINT16 ClockCtrl;
-
- //
- // Ensure no SD transactions are occurring on the SD Bus by
- // waiting for Command Inhibit (DAT) and Command Inhibit (CMD)
- // in the Present State register to be 0.
- //
- Status = SdMmcHcWaitMmioSet (
- PciIo,
- Slot,
- SD_MMC_HC_PRESENT_STATE,
- sizeof (PresentState),
- BIT0 | BIT1,
- 0,
- SD_MMC_HC_GENERIC_TIMEOUT
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Set SD Clock Enable in the Clock Control register to 0
- //
- ClockCtrl = (UINT16)~BIT2;
- Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, sizeof (ClockCtrl), &ClockCtrl);
-
- return Status;
-}
-
-/**
- SD/MMC card clock supply.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 3.2.1 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] ClockFreq The max clock frequency to be set. The unit is KHz.
- @param[in] BaseClkFreq The base clock frequency of host controller in MHz.
-
- @retval EFI_SUCCESS The clock is supplied successfully.
- @retval Others The clock isn't supplied successfully.
-
-**/
-EFI_STATUS
-SdMmcHcClockSupply (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN UINT64 ClockFreq,
- IN UINT32 BaseClkFreq
- )
-{
- EFI_STATUS Status;
- UINT32 SettingFreq;
- UINT32 Divisor;
- UINT32 Remainder;
- UINT16 ControllerVer;
- UINT16 ClockCtrl;
-
- //
- // Calculate a divisor for SD clock frequency
- //
- ASSERT (BaseClkFreq != 0);
-
- if (ClockFreq == 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (ClockFreq > (BaseClkFreq * 1000)) {
- ClockFreq = BaseClkFreq * 1000;
- }
-
- //
- // Calculate the divisor of base frequency.
- //
- Divisor = 0;
- SettingFreq = BaseClkFreq * 1000;
- while (ClockFreq < SettingFreq) {
- Divisor++;
-
- SettingFreq = (BaseClkFreq * 1000) / (2 * Divisor);
- Remainder = (BaseClkFreq * 1000) % (2 * Divisor);
- if ((ClockFreq == SettingFreq) && (Remainder == 0)) {
- break;
- }
- if ((ClockFreq == SettingFreq) && (Remainder != 0)) {
- SettingFreq ++;
- }
- }
-
- DEBUG ((DEBUG_INFO, "BaseClkFreq %dMHz Divisor %d ClockFreq %dKhz\n", BaseClkFreq, Divisor, ClockFreq));
-
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CTRL_VER, TRUE, sizeof (ControllerVer), &ControllerVer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Set SDCLK Frequency Select and Internal Clock Enable fields in Clock Control register.
- //
- if ((ControllerVer & 0xFF) == 2) {
- ASSERT (Divisor <= 0x3FF);
- ClockCtrl = ((Divisor & 0xFF) << 8) | ((Divisor & 0x300) >> 2);
- } else if (((ControllerVer & 0xFF) == 0) || ((ControllerVer & 0xFF) == 1)) {
- //
- // Only the most significant bit can be used as divisor.
- //
- if (((Divisor - 1) & Divisor) != 0) {
- Divisor = 1 << (HighBitSet32 (Divisor) + 1);
- }
- ASSERT (Divisor <= 0x80);
- ClockCtrl = (Divisor & 0xFF) << 8;
- } else {
- DEBUG ((DEBUG_ERROR, "Unknown SD Host Controller Spec version [0x%x]!!!\n", ControllerVer));
- return EFI_UNSUPPORTED;
- }
-
- //
- // Stop bus clock at first
- //
- Status = SdMmcHcStopClock (PciIo, Slot);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Supply clock frequency with specified divisor
- //
- ClockCtrl |= BIT0;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, FALSE, sizeof (ClockCtrl), &ClockCtrl);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Set SDCLK Frequency Select and Internal Clock Enable fields fails\n"));
- return Status;
- }
-
- //
- // Wait Internal Clock Stable in the Clock Control register to be 1
- //
- Status = SdMmcHcWaitMmioSet (
- PciIo,
- Slot,
- SD_MMC_HC_CLOCK_CTRL,
- sizeof (ClockCtrl),
- BIT1,
- BIT1,
- SD_MMC_HC_GENERIC_TIMEOUT
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Set SD Clock Enable in the Clock Control register to 1
- //
- ClockCtrl = BIT2;
- Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, sizeof (ClockCtrl), &ClockCtrl);
-
- return Status;
-}
-
-/**
- SD/MMC bus power control.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] PowerCtrl The value setting to the power control register.
-
- @retval TRUE There is a SD/MMC card attached.
- @retval FALSE There is no a SD/MMC card attached.
-
-**/
-EFI_STATUS
-SdMmcHcPowerControl (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN UINT8 PowerCtrl
- )
-{
- EFI_STATUS Status;
-
- //
- // Clr SD Bus Power
- //
- PowerCtrl &= (UINT8)~BIT0;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_POWER_CTRL, FALSE, sizeof (PowerCtrl), &PowerCtrl);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Set SD Bus Voltage Select and SD Bus Power fields in Power Control Register
- //
- PowerCtrl |= BIT0;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_POWER_CTRL, FALSE, sizeof (PowerCtrl), &PowerCtrl);
-
- return Status;
-}
-
-/**
- Set the SD/MMC bus width.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 3.4 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] BusWidth The bus width used by the SD/MMC device, it must be 1, 4 or 8.
-
- @retval EFI_SUCCESS The bus width is set successfully.
- @retval Others The bus width isn't set successfully.
-
-**/
-EFI_STATUS
-SdMmcHcSetBusWidth (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN UINT16 BusWidth
- )
-{
- EFI_STATUS Status;
- UINT8 HostCtrl1;
-
- if (BusWidth == 1) {
- HostCtrl1 = (UINT8)~(BIT5 | BIT1);
- Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
- } else if (BusWidth == 4) {
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, TRUE, sizeof (HostCtrl1), &HostCtrl1);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- HostCtrl1 |= BIT1;
- HostCtrl1 &= (UINT8)~BIT5;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, FALSE, sizeof (HostCtrl1), &HostCtrl1);
- } else if (BusWidth == 8) {
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, TRUE, sizeof (HostCtrl1), &HostCtrl1);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- HostCtrl1 &= (UINT8)~BIT1;
- HostCtrl1 |= BIT5;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, FALSE, sizeof (HostCtrl1), &HostCtrl1);
- } else {
- ASSERT (FALSE);
- return EFI_INVALID_PARAMETER;
- }
-
- return Status;
-}
-
-/**
- Supply SD/MMC card with lowest clock frequency at initialization.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] BaseClkFreq The base clock frequency of host controller in MHz.
-
- @retval EFI_SUCCESS The clock is supplied successfully.
- @retval Others The clock isn't supplied successfully.
-
-**/
-EFI_STATUS
-SdMmcHcInitClockFreq (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN UINT32 BaseClkFreq
- )
-{
- EFI_STATUS Status;
- UINT32 InitFreq;
-
- //
- // Calculate a divisor for SD clock frequency
- //
- if (BaseClkFreq == 0) {
- //
- // Don't support get Base Clock Frequency information via another method
- //
- return EFI_UNSUPPORTED;
- }
- //
- // Supply 400KHz clock frequency at initialization phase.
- //
- InitFreq = 400;
- Status = SdMmcHcClockSupply (PciIo, Slot, InitFreq, BaseClkFreq);
- return Status;
-}
-
-/**
- Supply SD/MMC card with maximum voltage at initialization.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] Capability The capability of the slot.
-
- @retval EFI_SUCCESS The voltage is supplied successfully.
- @retval Others The voltage isn't supplied successfully.
-
-**/
-EFI_STATUS
-SdMmcHcInitPowerVoltage (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN SD_MMC_HC_SLOT_CAP Capability
- )
-{
- EFI_STATUS Status;
- UINT8 MaxVoltage;
- UINT8 HostCtrl2;
-
- //
- // Calculate supported maximum voltage according to SD Bus Voltage Select
- //
- if (Capability.Voltage33 != 0) {
- //
- // Support 3.3V
- //
- MaxVoltage = 0x0E;
- } else if (Capability.Voltage30 != 0) {
- //
- // Support 3.0V
- //
- MaxVoltage = 0x0C;
- } else if (Capability.Voltage18 != 0) {
- //
- // Support 1.8V
- //
- MaxVoltage = 0x0A;
- HostCtrl2 = BIT3;
- Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
- gBS->Stall (5000);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- } else {
- ASSERT (FALSE);
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Set SD Bus Voltage Select and SD Bus Power fields in Power Control Register
- //
- Status = SdMmcHcPowerControl (PciIo, Slot, MaxVoltage);
-
- return Status;
-}
-
-/**
- Initialize the Timeout Control register with most conservative value at initialization.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 2.2.15 for details.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
-
- @retval EFI_SUCCESS The timeout control register is configured successfully.
- @retval Others The timeout control register isn't configured successfully.
-
-**/
-EFI_STATUS
-SdMmcHcInitTimeoutCtrl (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot
- )
-{
- EFI_STATUS Status;
- UINT8 Timeout;
-
- Timeout = 0x0E;
- Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_TIMEOUT_CTRL, FALSE, sizeof (Timeout), &Timeout);
-
- return Status;
-}
-
-/**
- Initial SD/MMC host controller with lowest clock frequency, max power and max timeout value
- at initialization.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] Capability The capability of the slot.
- @param[in] BaseClkFreq The base clock frequency of host controller in MHz.
-
- @retval EFI_SUCCESS The host controller is initialized successfully.
- @retval Others The host controller isn't initialized successfully.
-
-**/
-EFI_STATUS
-SdMmcHcInitHost (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN SD_MMC_HC_SLOT_CAP Capability,
- IN UINT32 BaseClkFreq
- )
-{
- EFI_STATUS Status;
-
- Status = SdMmcHcInitClockFreq (PciIo, Slot, BaseClkFreq);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = SdMmcHcInitPowerVoltage (PciIo, Slot, Capability);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = SdMmcHcInitTimeoutCtrl (PciIo, Slot);
- return Status;
-}
-
-/**
- Turn on/off LED.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] On The boolean to turn on/off LED.
-
- @retval EFI_SUCCESS The LED is turned on/off successfully.
- @retval Others The LED isn't turned on/off successfully.
-
-**/
-EFI_STATUS
-SdMmcHcLedOnOff (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Slot,
- IN BOOLEAN On
- )
-{
- EFI_STATUS Status;
- UINT8 HostCtrl1;
-
- if (On) {
- HostCtrl1 = BIT0;
- Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
- } else {
- HostCtrl1 = (UINT8)~BIT0;
- Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
- }
-
- return Status;
-}
-
-/**
- Build ADMA descriptor table for transfer.
-
- Refer to SD Host Controller Simplified spec 3.0 Section 1.13 for details.
-
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
- @retval EFI_SUCCESS The ADMA descriptor table is created successfully.
- @retval Others The ADMA descriptor table isn't created successfully.
-
-**/
-EFI_STATUS
-BuildAdmaDescTable (
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_PHYSICAL_ADDRESS Data;
- UINT64 DataLen;
- UINT64 Entries;
- UINT32 Index;
- UINT64 Remaining;
- UINT32 Address;
- UINTN TableSize;
- EFI_PCI_IO_PROTOCOL *PciIo;
- EFI_STATUS Status;
- UINTN Bytes;
-
- Data = Trb->DataPhy;
- DataLen = Trb->DataLen;
- PciIo = Trb->Private->PciIo;
- //
- // Only support 32bit ADMA Descriptor Table
- //
- if ((Data >= 0x100000000ul) || ((Data + DataLen) > 0x100000000ul)) {
- return EFI_INVALID_PARAMETER;
- }
- //
- // Address field shall be set on 32-bit boundary (Lower 2-bit is always set to 0)
- // for 32-bit address descriptor table.
- //
- if ((Data & (BIT0 | BIT1)) != 0) {
- DEBUG ((DEBUG_INFO, "The buffer [0x%x] to construct ADMA desc is not aligned to 4 bytes boundary!\n", Data));
- }
-
- Entries = DivU64x32 ((DataLen + ADMA_MAX_DATA_PER_LINE - 1), ADMA_MAX_DATA_PER_LINE);
- TableSize = (UINTN)MultU64x32 (Entries, sizeof (SD_MMC_HC_ADMA_DESC_LINE));
- Trb->AdmaPages = (UINT32)EFI_SIZE_TO_PAGES (TableSize);
- Status = PciIo->AllocateBuffer (
- PciIo,
- AllocateAnyPages,
- EfiBootServicesData,
- EFI_SIZE_TO_PAGES (TableSize),
- (VOID **)&Trb->AdmaDesc,
- 0
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
- ZeroMem (Trb->AdmaDesc, TableSize);
- Bytes = TableSize;
- Status = PciIo->Map (
- PciIo,
- EfiPciIoOperationBusMasterCommonBuffer,
- Trb->AdmaDesc,
- &Bytes,
- &Trb->AdmaDescPhy,
- &Trb->AdmaMap
- );
-
- if (EFI_ERROR (Status) || (Bytes != TableSize)) {
- //
- // Map error or unable to map the whole RFis buffer into a contiguous region.
- //
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES (TableSize),
- Trb->AdmaDesc
- );
- return EFI_OUT_OF_RESOURCES;
- }
-
- if ((UINT64)(UINTN)Trb->AdmaDescPhy > 0x100000000ul) {
- //
- // The ADMA doesn't support 64bit addressing.
- //
- PciIo->Unmap (
- PciIo,
- Trb->AdmaMap
- );
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES (TableSize),
- Trb->AdmaDesc
- );
- return EFI_DEVICE_ERROR;
- }
-
- Remaining = DataLen;
- Address = (UINT32)Data;
- for (Index = 0; Index < Entries; Index++) {
- if (Remaining <= ADMA_MAX_DATA_PER_LINE) {
- Trb->AdmaDesc[Index].Valid = 1;
- Trb->AdmaDesc[Index].Act = 2;
- Trb->AdmaDesc[Index].Length = (UINT16)Remaining;
- Trb->AdmaDesc[Index].Address = Address;
- break;
- } else {
- Trb->AdmaDesc[Index].Valid = 1;
- Trb->AdmaDesc[Index].Act = 2;
- Trb->AdmaDesc[Index].Length = 0;
- Trb->AdmaDesc[Index].Address = Address;
- }
-
- Remaining -= ADMA_MAX_DATA_PER_LINE;
- Address += ADMA_MAX_DATA_PER_LINE;
- }
-
- //
- // Set the last descriptor line as end of descriptor table
- //
- Trb->AdmaDesc[Index].End = 1;
- return EFI_SUCCESS;
-}
-
-/**
- Create a new TRB for the SD/MMC cmd request.
-
- @param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
- @param[in] Slot The slot number of the SD card to send the command to.
- @param[in] Packet A pointer to the SD command data structure.
- @param[in] Event If Event is NULL, blocking I/O is performed. If Event is
- not NULL, then nonblocking I/O is performed, and Event
- will be signaled when the Packet completes.
-
- @return Created Trb or NULL.
-
-**/
-SD_MMC_HC_TRB *
-SdMmcCreateTrb (
- IN SD_MMC_HC_PRIVATE_DATA *Private,
- IN UINT8 Slot,
- IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
- IN EFI_EVENT Event
- )
-{
- SD_MMC_HC_TRB *Trb;
- EFI_STATUS Status;
- EFI_TPL OldTpl;
- EFI_PCI_IO_PROTOCOL_OPERATION Flag;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINTN MapLength;
-
- Trb = AllocateZeroPool (sizeof (SD_MMC_HC_TRB));
- if (Trb == NULL) {
- return NULL;
- }
-
- Trb->Signature = SD_MMC_HC_TRB_SIG;
- Trb->Slot = Slot;
- Trb->BlockSize = 0x200;
- Trb->Packet = Packet;
- Trb->Event = Event;
- Trb->Started = FALSE;
- Trb->Timeout = Packet->Timeout;
- Trb->Private = Private;
-
- if ((Packet->InTransferLength != 0) && (Packet->InDataBuffer != NULL)) {
- Trb->Data = Packet->InDataBuffer;
- Trb->DataLen = Packet->InTransferLength;
- Trb->Read = TRUE;
- } else if ((Packet->OutTransferLength != 0) && (Packet->OutDataBuffer != NULL)) {
- Trb->Data = Packet->OutDataBuffer;
- Trb->DataLen = Packet->OutTransferLength;
- Trb->Read = FALSE;
- } else if ((Packet->InTransferLength == 0) && (Packet->OutTransferLength == 0)) {
- Trb->Data = NULL;
- Trb->DataLen = 0;
- } else {
- goto Error;
- }
-
- if (Trb->DataLen < Trb->BlockSize) {
- Trb->BlockSize = (UINT16)Trb->DataLen;
- }
-
- if (((Private->Slot[Trb->Slot].CardType == EmmcCardType) &&
- (Packet->SdMmcCmdBlk->CommandIndex == EMMC_SEND_TUNING_BLOCK)) ||
- ((Private->Slot[Trb->Slot].CardType == SdCardType) &&
- (Packet->SdMmcCmdBlk->CommandIndex == SD_SEND_TUNING_BLOCK))) {
- Trb->Mode = SdMmcPioMode;
- } else {
- if (Trb->Read) {
- Flag = EfiPciIoOperationBusMasterWrite;
- } else {
- Flag = EfiPciIoOperationBusMasterRead;
- }
-
- PciIo = Private->PciIo;
- if (Trb->DataLen != 0) {
- MapLength = Trb->DataLen;
- Status = PciIo->Map (
- PciIo,
- Flag,
- Trb->Data,
- &MapLength,
- &Trb->DataPhy,
- &Trb->DataMap
- );
- if (EFI_ERROR (Status) || (Trb->DataLen != MapLength)) {
- Status = EFI_BAD_BUFFER_SIZE;
- goto Error;
- }
- }
-
- if (Trb->DataLen == 0) {
- Trb->Mode = SdMmcNoData;
- } else if (Private->Capability[Slot].Adma2 != 0) {
- Trb->Mode = SdMmcAdmaMode;
- Status = BuildAdmaDescTable (Trb);
- if (EFI_ERROR (Status)) {
- PciIo->Unmap (PciIo, Trb->DataMap);
- goto Error;
- }
- } else if (Private->Capability[Slot].Sdma != 0) {
- Trb->Mode = SdMmcSdmaMode;
- } else {
- Trb->Mode = SdMmcPioMode;
- }
- }
-
- if (Event != NULL) {
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- InsertTailList (&Private->Queue, &Trb->TrbList);
- gBS->RestoreTPL (OldTpl);
- }
-
- return Trb;
-
-Error:
- SdMmcFreeTrb (Trb);
- return NULL;
-}
-
-/**
- Free the resource used by the TRB.
-
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
-**/
-VOID
-SdMmcFreeTrb (
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- PciIo = Trb->Private->PciIo;
-
- if (Trb->AdmaMap != NULL) {
- PciIo->Unmap (
- PciIo,
- Trb->AdmaMap
- );
- }
- if (Trb->AdmaDesc != NULL) {
- PciIo->FreeBuffer (
- PciIo,
- Trb->AdmaPages,
- Trb->AdmaDesc
- );
- }
- if (Trb->DataMap != NULL) {
- PciIo->Unmap (
- PciIo,
- Trb->DataMap
- );
- }
- FreePool (Trb);
- return;
-}
-
-/**
- Check if the env is ready for execute specified TRB.
-
- @param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
- @retval EFI_SUCCESS The env is ready for TRB execution.
- @retval EFI_NOT_READY The env is not ready for TRB execution.
- @retval Others Some erros happen.
-
-**/
-EFI_STATUS
-SdMmcCheckTrbEnv (
- IN SD_MMC_HC_PRIVATE_DATA *Private,
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_STATUS Status;
- EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT32 PresentState;
-
- Packet = Trb->Packet;
-
- if ((Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAdtc) ||
- (Packet->SdMmcCmdBlk->ResponseType == SdMmcResponseTypeR1b) ||
- (Packet->SdMmcCmdBlk->ResponseType == SdMmcResponseTypeR5b)) {
- //
- // Wait Command Inhibit (CMD) and Command Inhibit (DAT) in
- // the Present State register to be 0
- //
- PresentState = BIT0 | BIT1;
- } else {
- //
- // Wait Command Inhibit (CMD) in the Present State register
- // to be 0
- //
- PresentState = BIT0;
- }
-
- PciIo = Private->PciIo;
- Status = SdMmcHcCheckMmioSet (
- PciIo,
- Trb->Slot,
- SD_MMC_HC_PRESENT_STATE,
- sizeof (PresentState),
- PresentState,
- 0
- );
-
- return Status;
-}
-
-/**
- Wait for the env to be ready for execute specified TRB.
-
- @param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
- @retval EFI_SUCCESS The env is ready for TRB execution.
- @retval EFI_TIMEOUT The env is not ready for TRB execution in time.
- @retval Others Some erros happen.
-
-**/
-EFI_STATUS
-SdMmcWaitTrbEnv (
- IN SD_MMC_HC_PRIVATE_DATA *Private,
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_STATUS Status;
- EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
- UINT64 Timeout;
- BOOLEAN InfiniteWait;
-
- //
- // Wait Command Complete Interrupt Status bit in Normal Interrupt Status Register
- //
- Packet = Trb->Packet;
- Timeout = Packet->Timeout;
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- while (InfiniteWait || (Timeout > 0)) {
- //
- // Check Trb execution result by reading Normal Interrupt Status register.
- //
- Status = SdMmcCheckTrbEnv (Private, Trb);
- if (Status != EFI_NOT_READY) {
- return Status;
- }
- //
- // Stall for 1 microsecond.
- //
- gBS->Stall (1);
-
- Timeout--;
- }
-
- return EFI_TIMEOUT;
-}
-
-/**
- Execute the specified TRB.
-
- @param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
- @retval EFI_SUCCESS The TRB is sent to host controller successfully.
- @retval Others Some erros happen when sending this request to the host controller.
-
-**/
-EFI_STATUS
-SdMmcExecTrb (
- IN SD_MMC_HC_PRIVATE_DATA *Private,
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_STATUS Status;
- EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT16 Cmd;
- UINT16 IntStatus;
- UINT32 Argument;
- UINT16 BlkCount;
- UINT16 BlkSize;
- UINT16 TransMode;
- UINT8 HostCtrl1;
- UINT32 SdmaAddr;
- UINT64 AdmaAddr;
-
- Packet = Trb->Packet;
- PciIo = Trb->Private->PciIo;
- //
- // Clear all bits in Error Interrupt Status Register
- //
- IntStatus = 0xFFFF;
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_ERR_INT_STS, FALSE, sizeof (IntStatus), &IntStatus);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Clear all bits in Normal Interrupt Status Register excepts for Card Removal & Card Insertion bits.
- //
- IntStatus = 0xFF3F;
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_NOR_INT_STS, FALSE, sizeof (IntStatus), &IntStatus);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Set Host Control 1 register DMA Select field
- //
- if (Trb->Mode == SdMmcAdmaMode) {
- HostCtrl1 = BIT4;
- Status = SdMmcHcOrMmio (PciIo, Trb->Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- SdMmcHcLedOnOff (PciIo, Trb->Slot, TRUE);
-
- if (Trb->Mode == SdMmcSdmaMode) {
- if ((UINT64)(UINTN)Trb->DataPhy >= 0x100000000ul) {
- return EFI_INVALID_PARAMETER;
- }
-
- SdmaAddr = (UINT32)(UINTN)Trb->DataPhy;
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_SDMA_ADDR, FALSE, sizeof (SdmaAddr), &SdmaAddr);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- } else if (Trb->Mode == SdMmcAdmaMode) {
- AdmaAddr = (UINT64)(UINTN)Trb->AdmaDescPhy;
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_ADMA_SYS_ADDR, FALSE, sizeof (AdmaAddr), &AdmaAddr);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- BlkSize = Trb->BlockSize;
- if (Trb->Mode == SdMmcSdmaMode) {
- //
- // Set SDMA boundary to be 512K bytes.
- //
- BlkSize |= 0x7000;
- }
-
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_BLK_SIZE, FALSE, sizeof (BlkSize), &BlkSize);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- BlkCount = 0;
- if (Trb->Mode != SdMmcNoData) {
- //
- // Calcuate Block Count.
- //
- BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
- }
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_BLK_COUNT, FALSE, sizeof (BlkCount), &BlkCount);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Argument = Packet->SdMmcCmdBlk->CommandArgument;
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_ARG1, FALSE, sizeof (Argument), &Argument);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- TransMode = 0;
- if (Trb->Mode != SdMmcNoData) {
- if (Trb->Mode != SdMmcPioMode) {
- TransMode |= BIT0;
- }
- if (Trb->Read) {
- TransMode |= BIT4;
- }
- if (BlkCount > 1) {
- TransMode |= BIT5 | BIT1;
- }
- //
- // Only SD memory card needs to use AUTO CMD12 feature.
- //
- if (Private->Slot[Trb->Slot].CardType == SdCardType) {
- if (BlkCount > 1) {
- TransMode |= BIT2;
- }
- }
- }
-
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_TRANS_MOD, FALSE, sizeof (TransMode), &TransMode);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Cmd = (UINT16)LShiftU64(Packet->SdMmcCmdBlk->CommandIndex, 8);
- if (Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAdtc) {
- Cmd |= BIT5;
- }
- //
- // Convert ResponseType to value
- //
- if (Packet->SdMmcCmdBlk->CommandType != SdMmcCommandTypeBc) {
- switch (Packet->SdMmcCmdBlk->ResponseType) {
- case SdMmcResponseTypeR1:
- case SdMmcResponseTypeR5:
- case SdMmcResponseTypeR6:
- case SdMmcResponseTypeR7:
- Cmd |= (BIT1 | BIT3 | BIT4);
- break;
- case SdMmcResponseTypeR2:
- Cmd |= (BIT0 | BIT3);
- break;
- case SdMmcResponseTypeR3:
- case SdMmcResponseTypeR4:
- Cmd |= BIT1;
- break;
- case SdMmcResponseTypeR1b:
- case SdMmcResponseTypeR5b:
- Cmd |= (BIT0 | BIT1 | BIT3 | BIT4);
- break;
- default:
- ASSERT (FALSE);
- break;
- }
- }
- //
- // Execute cmd
- //
- Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_COMMAND, FALSE, sizeof (Cmd), &Cmd);
- return Status;
-}
-
-/**
- Check the TRB execution result.
-
- @param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
- @retval EFI_SUCCESS The TRB is executed successfully.
- @retval EFI_NOT_READY The TRB is not completed for execution.
- @retval Others Some erros happen when executing this request.
-
-**/
-EFI_STATUS
-SdMmcCheckTrbResult (
- IN SD_MMC_HC_PRIVATE_DATA *Private,
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_STATUS Status;
- EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
- UINT16 IntStatus;
- UINT32 Response[4];
- UINT32 SdmaAddr;
- UINT8 Index;
- UINT8 SwReset;
- UINT32 PioLength;
-
- SwReset = 0;
- Packet = Trb->Packet;
- //
- // Check Trb execution result by reading Normal Interrupt Status register.
- //
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_NOR_INT_STS,
- TRUE,
- sizeof (IntStatus),
- &IntStatus
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
- //
- // Check Transfer Complete bit is set or not.
- //
- if ((IntStatus & BIT1) == BIT1) {
- if ((IntStatus & BIT15) == BIT15) {
- //
- // Read Error Interrupt Status register to check if the error is
- // Data Timeout Error.
- // If yes, treat it as success as Transfer Complete has higher
- // priority than Data Timeout Error.
- //
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_ERR_INT_STS,
- TRUE,
- sizeof (IntStatus),
- &IntStatus
- );
- if (!EFI_ERROR (Status)) {
- if ((IntStatus & BIT4) == BIT4) {
- Status = EFI_SUCCESS;
- } else {
- Status = EFI_DEVICE_ERROR;
- }
- }
- }
-
- goto Done;
- }
- //
- // Check if there is a error happened during cmd execution.
- // If yes, then do error recovery procedure to follow SD Host Controller
- // Simplified Spec 3.0 section 3.10.1.
- //
- if ((IntStatus & BIT15) == BIT15) {
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_ERR_INT_STS,
- TRUE,
- sizeof (IntStatus),
- &IntStatus
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
- if ((IntStatus & 0x0F) != 0) {
- SwReset |= BIT1;
- }
- if ((IntStatus & 0xF0) != 0) {
- SwReset |= BIT2;
- }
-
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_SW_RST,
- FALSE,
- sizeof (SwReset),
- &SwReset
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
- Status = SdMmcHcWaitMmioSet (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_SW_RST,
- sizeof (SwReset),
- 0xFF,
- 0,
- SD_MMC_HC_GENERIC_TIMEOUT
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- Status = EFI_DEVICE_ERROR;
- goto Done;
- }
- //
- // Check if DMA interrupt is signalled for the SDMA transfer.
- //
- if ((Trb->Mode == SdMmcSdmaMode) && ((IntStatus & BIT3) == BIT3)) {
- //
- // Clear DMA interrupt bit.
- //
- IntStatus = BIT3;
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_NOR_INT_STS,
- FALSE,
- sizeof (IntStatus),
- &IntStatus
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
- //
- // Update SDMA Address register.
- //
- SdmaAddr = SD_MMC_SDMA_ROUND_UP ((UINT32)(UINTN)Trb->DataPhy, SD_MMC_SDMA_BOUNDARY);
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_SDMA_ADDR,
- FALSE,
- sizeof (UINT32),
- &SdmaAddr
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
- Trb->DataPhy = (UINT32)(UINTN)SdmaAddr;
- }
-
- if ((Packet->SdMmcCmdBlk->CommandType != SdMmcCommandTypeAdtc) &&
- (Packet->SdMmcCmdBlk->ResponseType != SdMmcResponseTypeR1b) &&
- (Packet->SdMmcCmdBlk->ResponseType != SdMmcResponseTypeR5b)) {
- if ((IntStatus & BIT0) == BIT0) {
- Status = EFI_SUCCESS;
- goto Done;
- }
- }
-
- if (((Private->Slot[Trb->Slot].CardType == EmmcCardType) &&
- (Packet->SdMmcCmdBlk->CommandIndex == EMMC_SEND_TUNING_BLOCK)) ||
- ((Private->Slot[Trb->Slot].CardType == SdCardType) &&
- (Packet->SdMmcCmdBlk->CommandIndex == SD_SEND_TUNING_BLOCK))) {
- //
- // When performing tuning procedure (Execute Tuning is set to 1) through PIO mode,
- // wait Buffer Read Ready bit of Normal Interrupt Status Register to be 1.
- // Refer to SD Host Controller Simplified Specification 3.0 figure 2-29 for details.
- //
- if ((IntStatus & BIT5) == BIT5) {
- //
- // Clear Buffer Read Ready interrupt at first.
- //
- IntStatus = BIT5;
- SdMmcHcRwMmio (Private->PciIo, Trb->Slot, SD_MMC_HC_NOR_INT_STS, FALSE, sizeof (IntStatus), &IntStatus);
- //
- // Read data out from Buffer Port register
- //
- for (PioLength = 0; PioLength < Trb->DataLen; PioLength += 4) {
- SdMmcHcRwMmio (Private->PciIo, Trb->Slot, SD_MMC_HC_BUF_DAT_PORT, TRUE, 4, (UINT8*)Trb->Data + PioLength);
- }
- Status = EFI_SUCCESS;
- goto Done;
- }
- }
-
- Status = EFI_NOT_READY;
-Done:
- //
- // Get response data when the cmd is executed successfully.
- //
- if (!EFI_ERROR (Status)) {
- if (Packet->SdMmcCmdBlk->CommandType != SdMmcCommandTypeBc) {
- for (Index = 0; Index < 4; Index++) {
- Status = SdMmcHcRwMmio (
- Private->PciIo,
- Trb->Slot,
- SD_MMC_HC_RESPONSE + Index * 4,
- TRUE,
- sizeof (UINT32),
- &Response[Index]
- );
- if (EFI_ERROR (Status)) {
- SdMmcHcLedOnOff (Private->PciIo, Trb->Slot, FALSE);
- return Status;
- }
- }
- CopyMem (Packet->SdMmcStatusBlk, Response, sizeof (Response));
- }
- }
-
- if (Status != EFI_NOT_READY) {
- SdMmcHcLedOnOff (Private->PciIo, Trb->Slot, FALSE);
- }
-
- return Status;
-}
-
-/**
- Wait for the TRB execution result.
-
- @param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
- @param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
-
- @retval EFI_SUCCESS The TRB is executed successfully.
- @retval Others Some erros happen when executing this request.
-
-**/
-EFI_STATUS
-SdMmcWaitTrbResult (
- IN SD_MMC_HC_PRIVATE_DATA *Private,
- IN SD_MMC_HC_TRB *Trb
- )
-{
- EFI_STATUS Status;
- EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
- UINT64 Timeout;
- BOOLEAN InfiniteWait;
-
- Packet = Trb->Packet;
- //
- // Wait Command Complete Interrupt Status bit in Normal Interrupt Status Register
- //
- Timeout = Packet->Timeout;
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- while (InfiniteWait || (Timeout > 0)) {
- //
- // Check Trb execution result by reading Normal Interrupt Status register.
- //
- Status = SdMmcCheckTrbResult (Private, Trb);
- if (Status != EFI_NOT_READY) {
- return Status;
- }
- //
- // Stall for 1 microsecond.
- //
- gBS->Stall (1);
-
- Timeout--;
- }
-
- return EFI_TIMEOUT;
-}
-
|