diff options
| author | Michael Kinney <michael.d.kinney@intel.com> | 2016-01-21 19:30:36 +0000 |
|---|---|---|
| committer | mdkinney <mdkinney@Edk2> | 2016-01-21 19:30:36 +0000 |
| commit | 957649a77da7c834750053ff479e274f1c94999b (patch) | |
| tree | 44693ff190b70f50fe443cc49877e1aaa8895e53 /QuarkPlatformPkg | |
| parent | df8652455e701710748a50b3839621a3440df353 (diff) | |
| download | edk2-platforms-957649a77da7c834750053ff479e274f1c94999b.tar.xz | |
QuarkPlatformPkg: Add Tpm12DeviceLib instance for Infineon I2C TPM
Add Tpm12DeviceLib instance for Infineon I2C TPM
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19731 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'QuarkPlatformPkg')
3 files changed, 683 insertions, 0 deletions
diff --git a/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c new file mode 100644 index 0000000000..882136540d --- /dev/null +++ b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c @@ -0,0 +1,618 @@ +/** @file
+ Basic TIS (TPM Interface Specification) functions for Infineon I2C TPM.
+
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiPei.h>
+#include <Library/Tpm12DeviceLib.h>
+#include <Library/BaseLib.h>
+#include <Library/TimerLib.h>
+#include <Library/DebugLib.h>
+#include <Library/I2cLib.h>
+
+//
+// Default TPM (Infineon SLB9645) I2C Slave Device Address on Crosshill board.
+//
+#define TPM_I2C_SLAVE_DEVICE_ADDRESS 0x20
+
+//
+// Default Infineon SLB9645 TPM I2C mapped registers (SLB9645 I2C Comm. Protocol Application Note).
+//
+#define INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT 0x0
+#define INFINEON_TPM_STS_0_ADDRESS_DEFAULT 0x01
+#define INFINEON_TPM_BURST0_COUNT_0_DEFAULT 0x02
+#define INFINEON_TPM_BURST1_COUNT_0_DEFAULT 0x03
+#define INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT 0x05
+#define INFINEON_TPM_DID_VID_0_DEFAULT 0x09
+
+//
+// Max. retry count for read transfers (as recommended by Infineon).
+//
+#define READ_RETRY 3
+
+//
+// Guard time of 250us between I2C read and next I2C write transfer (as recommended by Infineon).
+//
+#define GUARD_TIME 250
+
+//
+// Define bits of ACCESS and STATUS registers
+//
+
+///
+/// This bit is a 1 to indicate that the other bits in this register are valid.
+///
+#define TIS_PC_VALID BIT7
+///
+/// Indicate that this locality is active.
+///
+#define TIS_PC_ACC_ACTIVE BIT5
+///
+/// Set to 1 to indicate that this locality had the TPM taken away while
+/// this locality had the TIS_PC_ACC_ACTIVE bit set.
+///
+#define TIS_PC_ACC_SEIZED BIT4
+///
+/// Set to 1 to indicate that TPM MUST reset the
+/// TIS_PC_ACC_ACTIVE bit and remove ownership for localities less than the
+/// locality that is writing this bit.
+///
+#define TIS_PC_ACC_SEIZE BIT3
+///
+/// When this bit is 1, another locality is requesting usage of the TPM.
+///
+#define TIS_PC_ACC_PENDIND BIT2
+///
+/// Set to 1 to indicate that this locality is requesting to use TPM.
+///
+#define TIS_PC_ACC_RQUUSE BIT1
+///
+/// A value of 1 indicates that a T/OS has not been established on the platform
+///
+#define TIS_PC_ACC_ESTABLISH BIT0
+
+///
+/// When this bit is 1, TPM is in the Ready state,
+/// indicating it is ready to receive a new command.
+///
+#define TIS_PC_STS_READY BIT6
+///
+/// Write a 1 to this bit to cause the TPM to execute that command.
+///
+#define TIS_PC_STS_GO BIT5
+///
+/// This bit indicates that the TPM has data available as a response.
+///
+#define TIS_PC_STS_DATA BIT4
+///
+/// The TPM sets this bit to a value of 1 when it expects another byte of data for a command.
+///
+#define TIS_PC_STS_EXPECT BIT3
+///
+/// Writes a 1 to this bit to force the TPM to re-send the response.
+///
+#define TIS_PC_STS_RETRY BIT1
+
+//
+// Default TimeOut values in microseconds
+//
+#define TIS_TIMEOUT_A (750 * 1000) // 750ms
+#define TIS_TIMEOUT_B (2000 * 1000) // 2s
+#define TIS_TIMEOUT_C (750 * 1000) // 750ms
+#define TIS_TIMEOUT_D (750 * 1000) // 750ms
+
+//
+// Global variable to indicate if TPM I2C Read Transfer has previously occurred.
+// NOTE: Given the GUARD_TIME requirement (TpmAccess.h), if this library loaded
+// by PEI Drivers this global variable required to be resident in R/W memory
+//
+BOOLEAN mI2CPrevReadTransfer = FALSE;
+
+/**
+ Writes single byte data to TPM specified by I2C register address.
+
+ @param[in] TpmAddress The register to write.
+ @param[in] Data The data to write to the register.
+
+**/
+VOID
+TpmWriteByte (
+ IN UINTN TpmAddress,
+ IN UINT8 Data
+ )
+{
+ EFI_STATUS Status;
+ UINTN WriteLength;
+ UINT8 WriteData[2];
+ EFI_I2C_DEVICE_ADDRESS I2CDeviceAddr;
+
+ //
+ // Setup I2C Slave device address and address mode (7-bit).
+ //
+ I2CDeviceAddr.I2CDeviceAddress = TPM_I2C_SLAVE_DEVICE_ADDRESS;
+
+ //
+ // As recommended by Infineon (SLB9645 I2C Communication protocol application
+ // note revision 1.0) wait 250 microseconds between a read and a write transfer.
+ //
+ if (mI2CPrevReadTransfer) {
+ MicroSecondDelay (GUARD_TIME);
+ }
+
+ //
+ // Write to TPM register.
+ //
+ WriteLength = 2;
+ WriteData[0] = (UINT8)TpmAddress;
+ WriteData[1] = Data;
+
+ Status = I2cWriteMultipleByte (
+ I2CDeviceAddr,
+ EfiI2CSevenBitAddrMode,
+ &WriteLength,
+ &WriteData
+ );
+ if (EFI_ERROR(Status)) {
+ DEBUG ((EFI_D_ERROR, "TpmWriteByte(): I2C Write to TPM address %0x failed (%r)\n", TpmAddress, Status));
+ ASSERT (FALSE); // Writes to TPM should always succeed.
+ }
+
+ mI2CPrevReadTransfer = FALSE;
+}
+
+/**
+ Reads single byte data from TPM specified by I2C register address.
+
+ Due to stability issues when using I2C combined write/read transfers (with
+ RESTART) to TPM (specifically read from status register), a single write is
+ performed followed by single read (with STOP condition in between).
+
+ @param[in] TpmAddress Address of register to read.
+
+ @return The value register read.
+
+**/
+UINT8
+TpmReadByte (
+ IN UINTN TpmAddress
+ )
+{
+ UINT8 Data[1];
+ UINT8 ReadData;
+ UINT8 ReadCount;
+
+ EFI_I2C_DEVICE_ADDRESS I2CDeviceAddr;
+ EFI_I2C_ADDR_MODE I2CAddrMode;
+
+ EFI_STATUS Status;
+
+ Status = EFI_SUCCESS;
+ ReadData = 0xFF;
+ ReadCount = 0;
+
+ //
+ // Locate I2C protocol for TPM I2C access.
+ //
+ I2CDeviceAddr.I2CDeviceAddress = TPM_I2C_SLAVE_DEVICE_ADDRESS;
+ I2CAddrMode = EfiI2CSevenBitAddrMode;
+
+ //
+ // As recommended by Infineon (SLB9645 I2C Communication protocol application
+ // note revision 1.0) retry up to 3 times if TPM status, access or burst count
+ // registers return 0xFF.
+ //
+ while ((ReadData == 0xFF) && (ReadCount < READ_RETRY)) {
+ //
+ // As recommended by Infineon (SLB9645 I2C Communication protocol application
+ // note revision 1.0) wait 250 microseconds between a read and a write transfer.
+ //
+ if (mI2CPrevReadTransfer) {
+ MicroSecondDelay (GUARD_TIME);
+ }
+
+ //
+ // Write address to TPM.
+ //
+ Data[0] = (UINT8)TpmAddress;
+ Status = I2cWriteByte (
+ I2CDeviceAddr,
+ I2CAddrMode,
+ &Data
+ );
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((EFI_D_INFO, "TpmReadByte(): write to TPM address %0x failed (%r)\n", TpmAddress, Status));
+ }
+
+ mI2CPrevReadTransfer = FALSE;
+
+ //
+ // Read data from TPM.
+ //
+ Data[0] = (UINT8)TpmAddress;
+ Status = I2cReadByte (
+ I2CDeviceAddr,
+ I2CAddrMode,
+ &Data
+ );
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((EFI_D_INFO, "TpmReadByte(): read from TPM address %0x failed (%r)\n", TpmAddress, Status));
+ ReadData = 0xFF;
+ } else {
+ ReadData = Data[0];
+ }
+
+ //
+ // Only need to retry 3 times for TPM status, access, and burst count registers.
+ // If read transfer is to TPM Data FIFO, do not retry, exit loop.
+ //
+ if (TpmAddress == INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT) {
+ ReadCount = READ_RETRY;
+ } else {
+ ReadCount++;
+ }
+
+ mI2CPrevReadTransfer = TRUE;
+ }
+
+ if (EFI_ERROR(Status)) {
+ //
+ // Only reads to access register allowed to fail.
+ //
+ if (TpmAddress != INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT) {
+ DEBUG ((EFI_D_ERROR, "TpmReadByte(): read from TPM address %0x failed\n", TpmAddress));
+ ASSERT_EFI_ERROR (Status);
+ }
+ }
+ return ReadData;
+}
+
+/**
+ Check whether the value of a TPM chip register satisfies the input BIT setting.
+
+ @param[in] Register TPM register to be checked.
+ @param[in] BitSet Check these data bits are set.
+ @param[in] BitClear Check these data bits are clear.
+ @param[in] TimeOut The max wait time (unit MicroSecond) when checking register.
+
+ @retval EFI_SUCCESS The register satisfies the check bit.
+ @retval EFI_TIMEOUT The register can't run into the expected status in time.
+**/
+EFI_STATUS
+TisPcWaitRegisterBits (
+ IN UINTN Register,
+ IN UINT8 BitSet,
+ IN UINT8 BitClear,
+ IN UINT32 TimeOut
+ )
+{
+ UINT8 RegRead;
+ UINT32 WaitTime;
+
+ for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){
+ RegRead = TpmReadByte (Register);
+ if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0)
+ return EFI_SUCCESS;
+ MicroSecondDelay (30);
+ }
+ return EFI_TIMEOUT;
+}
+
+/**
+ Get BurstCount by reading the burstCount field of a TIS register
+ in the time of default TIS_TIMEOUT_D.
+
+ @param[out] BurstCount Pointer to a buffer to store the got BurstConut.
+
+ @retval EFI_SUCCESS Get BurstCount.
+ @retval EFI_INVALID_PARAMETER BurstCount is NULL.
+ @retval EFI_TIMEOUT BurstCount can't be got in time.
+**/
+EFI_STATUS
+TisPcReadBurstCount (
+ OUT UINT16 *BurstCount
+ )
+{
+ UINT32 WaitTime;
+ UINT8 DataByte0;
+ UINT8 DataByte1;
+
+ if (BurstCount == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ WaitTime = 0;
+ do {
+ //
+ // BurstCount is UINT16, but it is not 2bytes aligned,
+ // so it needs to use TpmReadByte to read two times
+ //
+ DataByte0 = TpmReadByte (INFINEON_TPM_BURST0_COUNT_0_DEFAULT);
+ DataByte1 = TpmReadByte (INFINEON_TPM_BURST1_COUNT_0_DEFAULT);
+ *BurstCount = (UINT16)((DataByte1 << 8) + DataByte0);
+ if (*BurstCount != 0) {
+ return EFI_SUCCESS;
+ }
+ MicroSecondDelay (30);
+ WaitTime += 30;
+ } while (WaitTime < TIS_TIMEOUT_D);
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Set TPM chip to ready state by sending ready command TIS_PC_STS_READY
+ to Status Register in time.
+
+ @retval EFI_SUCCESS TPM chip enters into ready state.
+ @retval EFI_TIMEOUT TPM chip can't be set to ready state in time.
+**/
+EFI_STATUS
+TisPcPrepareCommand (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_READY);
+ Status = TisPcWaitRegisterBits (
+ INFINEON_TPM_STS_0_ADDRESS_DEFAULT,
+ TIS_PC_STS_READY,
+ 0,
+ TIS_TIMEOUT_B
+ );
+ return Status;
+}
+
+/**
+ This service requests use TPM12.
+
+ @retval EFI_SUCCESS Get the control of TPM12 chip.
+ @retval EFI_NOT_FOUND TPM12 not found.
+ @retval EFI_DEVICE_ERROR Unexpected device behavior.
+**/
+EFI_STATUS
+EFIAPI
+Tpm12RequestUseTpm (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Check to see if TPM exists
+ //
+ if (TpmReadByte (INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT) == 0xFF) {
+ return EFI_NOT_FOUND;
+ }
+
+ TpmWriteByte (INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT, TIS_PC_ACC_RQUUSE);
+
+ //
+ // No locality set before, ACCESS_X.activeLocality MUST be valid within TIMEOUT_A
+ //
+ Status = TisPcWaitRegisterBits (
+ INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT,
+ (UINT8)(TIS_PC_ACC_ACTIVE |TIS_PC_VALID),
+ 0,
+ TIS_TIMEOUT_A
+ );
+ return Status;
+}
+
+/**
+ Send command to TPM for execution.
+
+ @param[in] TpmBuffer Buffer for TPM command data.
+ @param[in] DataLength TPM command data length.
+
+ @retval EFI_SUCCESS Operation completed successfully.
+ @retval EFI_TIMEOUT The register can't run into the expected status in time.
+
+**/
+EFI_STATUS
+TisPcSend (
+ IN UINT8 *TpmBuffer,
+ IN UINT32 DataLength
+ )
+{
+ UINT16 BurstCount;
+ UINT32 Index;
+ EFI_STATUS Status;
+
+ Status = TisPcPrepareCommand ();
+ if (EFI_ERROR (Status)){
+ DEBUG ((DEBUG_ERROR, "The TPM is not ready!\n"));
+ goto Done;
+ }
+ Index = 0;
+ while (Index < DataLength) {
+ Status = TisPcReadBurstCount (&BurstCount);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_TIMEOUT;
+ goto Done;
+ }
+ for (; BurstCount > 0 && Index < DataLength; BurstCount--) {
+ TpmWriteByte (INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT, *(TpmBuffer + Index));
+ Index++;
+ }
+ }
+ //
+ // Ensure the TPM status STS_EXPECT change from 1 to 0
+ //
+ Status = TisPcWaitRegisterBits (
+ INFINEON_TPM_STS_0_ADDRESS_DEFAULT,
+ (UINT8) TIS_PC_VALID,
+ TIS_PC_STS_EXPECT,
+ TIS_TIMEOUT_C
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ //
+ // Start the command
+ //
+ TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_GO);
+
+Done:
+ if (EFI_ERROR (Status)) {
+ //
+ // Ensure the TPM state change from "Reception" to "Idle/Ready"
+ //
+ TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_READY);
+ }
+
+ return Status;
+}
+
+/**
+ Receive response data of last command from TPM.
+
+ @param[out] TpmBuffer Buffer for response data.
+ @param[out] RespSize Response data length.
+
+ @retval EFI_SUCCESS Operation completed successfully.
+ @retval EFI_TIMEOUT The register can't run into the expected status in time.
+ @retval EFI_DEVICE_ERROR Unexpected device status.
+ @retval EFI_BUFFER_TOO_SMALL Response data is too long.
+
+**/
+EFI_STATUS
+TisPcReceive (
+ OUT UINT8 *TpmBuffer,
+ OUT UINT32 *RespSize
+ )
+{
+ EFI_STATUS Status;
+ UINT16 BurstCount;
+ UINT32 Index;
+ UINT32 ResponseSize;
+ TPM_RSP_COMMAND_HDR *ResponseHeader;
+
+ //
+ // Wait for the command completion
+ //
+ Status = TisPcWaitRegisterBits (
+ INFINEON_TPM_STS_0_ADDRESS_DEFAULT,
+ (UINT8) (TIS_PC_VALID | TIS_PC_STS_DATA),
+ 0,
+ TIS_TIMEOUT_B
+ );
+ if (EFI_ERROR (Status)) {
+ Status = EFI_TIMEOUT;
+ goto Done;
+ }
+ //
+ // Read the response data header and check it
+ //
+ Index = 0;
+ BurstCount = 0;
+ while (Index < sizeof (TPM_RSP_COMMAND_HDR)) {
+ Status = TisPcReadBurstCount (&BurstCount);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_TIMEOUT;
+ goto Done;
+ }
+ for (; BurstCount > 0 ; BurstCount--) {
+ *(TpmBuffer + Index) = TpmReadByte (INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT);
+ Index++;
+ if (Index == sizeof (TPM_RSP_COMMAND_HDR))
+ break;
+ }
+ }
+
+ //
+ // Check the response data header (tag, parasize and returncode)
+ //
+ ResponseHeader = (TPM_RSP_COMMAND_HDR *)TpmBuffer;
+ if (SwapBytes16 (ReadUnaligned16 (&ResponseHeader->tag)) != TPM_TAG_RSP_COMMAND) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ ResponseSize = SwapBytes32 (ReadUnaligned32 (&ResponseHeader->paramSize));
+ if (ResponseSize == sizeof (TPM_RSP_COMMAND_HDR)) {
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+ if (ResponseSize < sizeof (TPM_RSP_COMMAND_HDR)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+ if (*RespSize < ResponseSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ goto Done;
+ }
+ *RespSize = ResponseSize;
+
+ //
+ // Continue reading the remaining data
+ //
+ while (Index < ResponseSize) {
+ for (; BurstCount > 0 ; BurstCount--) {
+ *(TpmBuffer + Index) = TpmReadByte (INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT);
+ Index++;
+ if (Index == ResponseSize) {
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+ }
+ Status = TisPcReadBurstCount (&BurstCount);
+ if (EFI_ERROR (Status) && (Index < ResponseSize)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+ }
+
+Done:
+ //
+ // Ensure the TPM state change from "Execution" or "Completion" to "Idle/Ready"
+ //
+ TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_READY);
+
+ return Status;
+}
+
+/**
+ This service enables the sending of commands to the TPM12.
+
+ @param[in] InputParameterBlockSize Size of the TPM12 input parameter block.
+ @param[in] InputParameterBlock Pointer to the TPM12 input parameter block.
+ @param[in,out] OutputParameterBlockSize Size of the TPM12 output parameter block.
+ @param[in] OutputParameterBlock Pointer to the TPM12 output parameter block.
+
+ @retval EFI_SUCCESS The command byte stream was successfully sent to
+ the device and a response was successfully received.
+ @retval EFI_DEVICE_ERROR The command was not successfully sent to the
+ device or a response was not successfully received
+ from the device.
+ @retval EFI_BUFFER_TOO_SMALL The output parameter block is too small.
+**/
+EFI_STATUS
+EFIAPI
+Tpm12SubmitCommand (
+ IN UINT32 InputParameterBlockSize,
+ IN UINT8 *InputParameterBlock,
+ IN OUT UINT32 *OutputParameterBlockSize,
+ IN UINT8 *OutputParameterBlock
+ )
+{
+ EFI_STATUS Status;
+
+ Status = TisPcSend (InputParameterBlock, InputParameterBlockSize);
+ if (!EFI_ERROR (Status)) {
+ Status = TisPcReceive (OutputParameterBlock, OutputParameterBlockSize);
+ }
+ return Status;
+}
diff --git a/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf new file mode 100644 index 0000000000..62b620fc57 --- /dev/null +++ b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf @@ -0,0 +1,44 @@ +## @file
+# Provides some common functions for the TCG feature for Infineon I2C TPM.
+#
+# This instance provides basic TPM Interface Specification (TIS) functions
+# for Infineon I2C TPM.
+#
+# Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = Tpm12DeviceLibInfineonI2c
+ MODULE_UNI_FILE = Tpm12DeviceLibInfineonI2c.uni
+ FILE_GUID = DBE37563-AFEF-4B41-BDCE-B01B6D1E8690
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = Tpm12DeviceLib|PEIM DXE_DRIVER DXE_SMM_DRIVER UEFI_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF
+#
+
+[Sources]
+ TisPc.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ SecurityPkg/SecurityPkg.dec
+ QuarkSocPkg/QuarkSocPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ TimerLib
+ DebugLib
+ I2cLib
diff --git a/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni new file mode 100644 index 0000000000..601f467486 --- /dev/null +++ b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni @@ -0,0 +1,21 @@ +// /** @file
+// Provides some common functions for the TCG feature for Infineon I2C TPM.
+//
+// This instance provides basic TPM Interface Specification (TIS) functions
+// for Infineon I2C TPM.
+//
+// Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "Provides some common functions for the TCG feature for Infineon I2C TPM"
+
+#string STR_MODULE_DESCRIPTION #language en-US "This instance provides basic TPM Interface Specification (TIS) functions for Infineon I2C TPM."
+
|