diff options
| author | Guo Mang <mang.guo@intel.com> | 2017-04-27 11:41:08 +0800 |
|---|---|---|
| committer | Guo Mang <mang.guo@intel.com> | 2017-04-27 13:02:50 +0800 |
| commit | 1c580b726b1094ecc10b153c4f72ce4d1022fe6b (patch) | |
| tree | d7181b2bb0386fa3d0cfb76edf37532d6a3045bf /Vlv2TbltDevicePkg/Include/Protocol | |
| parent | ab0f312088aeea325560ce9b3058f05db0974fd5 (diff) | |
| download | edk2-platforms-1c580b726b1094ecc10b153c4f72ce4d1022fe6b.tar.xz | |
Vlv2TbltDevicePkg: Remove unused Package
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>
Diffstat (limited to 'Vlv2TbltDevicePkg/Include/Protocol')
23 files changed, 0 insertions, 3470 deletions
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/CK505ClockPlatformInfo.h b/Vlv2TbltDevicePkg/Include/Protocol/CK505ClockPlatformInfo.h deleted file mode 100644 index 87c1c37686..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/CK505ClockPlatformInfo.h +++ /dev/null @@ -1,131 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-Module Name:
-
- CK505ClockPlatformInfo.h
-
-Abstract:
-
- Protocol to communicate product clock routing information.
-
-GUID Info:
- {3C485EA4-449A-46ce-BB08-2A336EA96B4E}
- 0x3c485ea4, 0x449a, 0x46ce, 0xbb, 0x8, 0x2a, 0x33, 0x6e, 0xa9, 0x6b, 0x4e);
-
-**/
-
-#ifndef _CLOCK_PLATFORM_INFO_H_
-#define _CLOCK_PLATFORM_INFO_H_
-
-
-#define EFI_CK505_CLOCK_PLATFORM_INFO_GUID \
- {0x3c485ea4, 0x449a, 0x46ce, 0xbb, 0x8, 0x2a, 0x33, 0x6e, 0xa9, 0x6b, 0x4e}
-
-//
-// Structure to hold register modifications
-//
-typedef enum {
- None = 0x00000000,
- nICS9LP505_1 = 0x00000001,
- nICS9LP505_2 = 0x00000002,
- nIDTCV163 = 0x00000004,
- nIDTCV174 = 0x00000008,
- nSLG505YC56 = 0x00000010,
- nSLG505YC64 = 0x00000020,
- nCY28505 = 0x00000040,
- nCY28505_2 = 0x00000080,
- nCY28505LF = 0x00000100,
- nPI6C505_OLD = 0x00000200,
- nPI6C505_RevD = 0x00000400,
- nGENERIC_505 = 0x00000800,
- nSLG505YC264 = 0x00001000,
- nIDTCV183 = 0x00002000,
- nSLG505YC256 = 0x00004000,
- nIDTCV184 = 0x00008000,
- nIDTCV190 = 0x00010000,
- All = 0xFFFFFFFF
-} EFI_CLOCKS_SUPPORTED;
-
-typedef enum {
- Disabled,
- Enabled,
- EnabledWithoutSwitch,
- EnabledWithSwitch
-} EFI_SIGNAL_STATE;
-
-typedef enum {
- SrcClk11,
- SrcClk10,
- SrcClk9,
- SrcClk8,
- SrcClk7,
- SrcClk6,
- SrcClk5,
- SrcClk4,
- SrcClk3,
- SrcClk2,
- SrcClk1,
- SrcClk0,
- CpuClk1,
- CpuClk0,
- Ref0,
- Dot96,
- Usb48,
- PciClkF5,
- PciClk4,
- PciClk3,
- PciClk2,
- PciClk1,
- PciClk0,
- SaveClockConfiguration,
- MePresent,
- Cr_A,
- Cr_B,
- Cr_C,
- Cr_D,
- Cr_E,
- Cr_F,
- Cr_G,
- Cr_H,
- Clk_None // Dummy entry for dynamic detection
-} EFI_CLOCK_SIGNAL_NAME;
-
-typedef struct {
- EFI_CLOCK_SIGNAL_NAME Signal;
- EFI_SIGNAL_STATE State;
- EFI_CLOCKS_SUPPORTED Supported;
-} EFI_STATIC_SIGNALS;
-
-typedef struct {
- BOOLEAN BehindBridge;
- UINT16 BridgeBus;
- UINT16 BridgeDev;
- UINT16 BridgeFunction;
- UINT16 TargetDevice;
- EFI_CLOCK_SIGNAL_NAME Signal;
-} EFI_DYNAMIC_SIGNALS;
-
-
-typedef struct {
- EFI_STATIC_SIGNALS *StaticClockTable;
- UINTN StaticClockTableCount;
- EFI_STATIC_SIGNALS *SxClockTable;
- UINTN SxClockTableCount;
- EFI_STATIC_SIGNALS *DynamicDisabledClocksTable;
- UINTN DynamicDisabledClocksTableCount;
-} EFI_CLOCK_PLATFORM_INFO;
-
-extern EFI_GUID gEfiCk505ClockPlatformInfoGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/EnhancedSpeedstep.h b/Vlv2TbltDevicePkg/Include/Protocol/EnhancedSpeedstep.h deleted file mode 100644 index e71778f833..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/EnhancedSpeedstep.h +++ /dev/null @@ -1,81 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-
-Module Name:
-
- EnhancedSpeedstep.h
-
-Abstract:
-
- Enhanced Speedstep protocol
-
- The Enhanced Speedstep Protocol support.
-
-**/
-
-#ifndef _ENHANCED_SPEEDSTEP_H_
-#define _ENHANCED_SPEEDSTEP_H_
-
-#define ENHANCED_SPEEDSTEP_PROTOCOL_GUID \
- { \
- 0x91a1ddcf, 0x5374, 0x4939, 0x89, 0x51, 0xd7, 0x29, 0x3f, 0x1a, 0x78, 0x6f \
- }
-
-typedef struct _ENHANCED_SPEEDSTEP_PROTOCOL ENHANCED_SPEEDSTEP_PROTOCOL;
-
-typedef struct {
- UINT8 Version; // EIST State format
- UINT8 Size; // Size of element
- UINT32 RatioStep; // Step
- UINT32 MinRatio; // Calculated min ratio
- UINT32 MaxRatio; // Calculated max ratio
- UINT32 MinCoreFreq; // Calculated min freq
- UINT32 MaxCoreFreq; // Calculated max freq
- UINT32 MinPower; // Calculated min power
- UINT32 MaxPower; // Calculated max power
- UINT32 NumStates; // Number of states
-} EIST_INFORMATION;
-
-typedef struct {
- UINT32 CoreFrequency;
- UINT32 Power;
- UINT32 TransitionLatency;
- UINT32 BusMasterLatency;
- UINT32 Control;
- UINT32 Status;
-} EFI_ACPI_CPU_PSS_STATE;
-
-typedef
-EFI_STATUS
-(EFIAPI *GET_EIST_TABLE) (
- IN ENHANCED_SPEEDSTEP_PROTOCOL *This,
- OUT EIST_INFORMATION **EistInformation,
- OUT VOID **PssStates
- );
-
-struct _ENHANCED_SPEEDSTEP_PROTOCOL {
- UINT32 ProcApicId;
- GET_EIST_TABLE GetEistTable;
-};
-
-//
-// There will be an instance of this protocol for every processor
-// in the system. ProcNumber is used to manage all the different
-// processors in the system and passed into the MP protocol
-// to run code streams on application processors
-//
-extern EFI_GUID gEnhancedSpeedstepProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/GlobalNvsArea.h b/Vlv2TbltDevicePkg/Include/Protocol/GlobalNvsArea.h deleted file mode 100644 index e4cbd4a59a..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/GlobalNvsArea.h +++ /dev/null @@ -1,487 +0,0 @@ -/** @file
-
- Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
-
-
- This program and the accompanying materials are licensed and made available under
-
- the terms and conditions of the BSD License that accompanies this distribution.
-
- The full text of the license may be found at
-
- http://opensource.org/licenses/bsd-license.php.
-
-
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-
-
-Module Name:
-
- GlobalNvsArea.h
-
-Abstract:
-
- Definition of the global NVS area protocol. This protocol
- publishes the address and format of a global ACPI NVS buffer used as a communications
- buffer between SMM code and ASL code.
- The format is derived from the ACPI reference code, version 0.95.
-
- Note: Data structures defined in this protocol are not naturally aligned.
-
-**/
-
-
-#ifndef _GLOBAL_NVS_AREA_H_
-#define _GLOBAL_NVS_AREA_H_
-
-//
-// Includes
-//
-#define GLOBAL_NVS_DEVICE_ENABLE 1
-#define GLOBAL_NVS_DEVICE_DISABLE 0
-
-//
-// Forward reference for pure ANSI compatibility
-//
-
-//EFI_FORWARD_DECLARATION (EFI_GLOBAL_NVS_AREA_PROTOCOL);
-
-//
-// Global NVS Area Protocol GUID
-//
-#define EFI_GLOBAL_NVS_AREA_PROTOCOL_GUID \
-{ 0x74e1e48, 0x8132, 0x47a1, 0x8c, 0x2c, 0x3f, 0x14, 0xad, 0x9a, 0x66, 0xdc }
-
-//
-// Revision id - Added TPM related fields
-//
-#define GLOBAL_NVS_AREA_RIVISION_1 1
-
-//
-// Extern the GUID for protocol users.
-//
-extern EFI_GUID gEfiGlobalNvsAreaProtocolGuid;
-
-//
-// Global NVS Area definition
-//
-#pragma pack (1)
-typedef struct {
- //
- // Miscellaneous Dynamic Values, the definitions below need to be matched
- // GNVS definitions in Platform.ASL
- //
- UINT16 OperatingSystem; // 00
- UINT8 SmiFunction; // 02 SMI function call via IO Trap
- UINT8 SmiParameter0; // 03
- UINT8 SmiParameter1; // 04
- UINT8 SciFunction; // 05 SCI function call via _L00
- UINT8 SciParameter0; // 06
- UINT8 SciParameter1; // 07
- UINT8 GlobalLock; // 08 Global lock function call
- UINT8 LockParameter0; // 09
- UINT8 LockParameter1; // 10
- UINT32 Port80DebugValue; // 11
- UINT8 LidState; // 15 Open = 1
- UINT8 PowerState; // 16 AC = 1
- UINT8 DebugState; // 17
-
-
- //
- // Thermal Policy Values
- //
- UINT8 EnableThermalOffset; // 18 ThermalOffset for KSC
- UINT8 Reserved1; // 19
- UINT8 Reserved2; // 20
- UINT8 PassiveThermalTripPoint; // 21
- UINT8 PassiveTc1Value; // 22
- UINT8 PassiveTc2Value; // 23
- UINT8 PassiveTspValue; // 24
- UINT8 CriticalThermalTripPoint; // 25
- UINT8 EnableDigitalThermalSensor; // 26
- UINT8 BspDigitalThermalSensorTemperature; // 27 Temperature of BSP
- UINT8 ApDigitalThermalSensorTemperature; // 28 Temperature of AP
- UINT8 DigitalThermalSensorSmiFunction; // 29 SMI function call via DTS IO Trap
-
- //
- // Battery Support Values
- //
- UINT8 NumberOfBatteries; // 30
- UINT8 BatteryCapacity0; // 31 Battery 0 Stored Capacity
- UINT8 BatteryCapacity1; // 32 Battery 1 Stored Capacity
- UINT8 BatteryCapacity2; // 33 Battery 2 Stored Capacity
- UINT8 BatteryStatus0; // 34 Battery 0 Stored Status
- UINT8 BatteryStatus1; // 35 Battery 1 Stored Status
- UINT8 BatteryStatus2; // 36 Battery 2 Stored Status
-
- // NOTE: Do NOT Change the Offset of Revision Field
- UINT8 Revision; // 37 Revision of the structure EFI_GLOBAL_NVS_AREA
- UINT8 Reserved3[2]; // 38:39
-
- //
- // Processor Configuration Values
- //
- UINT8 ApicEnable; // 40 APIC Enabled by SBIOS (APIC Enabled = 1)
- UINT8 LogicalProcessorCount; // 41 Processor Count Enabled (MP Enabled != 0)
- UINT8 CurentPdcState0; // 42 PDC settings, Processor 0
- UINT8 CurentPdcState1; // 43 PDC settings, Processor 1
- UINT8 MaximumPpcState; // 44 Maximum PPC state
- UINT32 PpmFlags; // 45:48 PPM configuration flags, same as CFGD
- UINT8 Reserved4[1]; // 49
-
- //
- // SIO Configuration Values
- //
- UINT8 DockedSioPresent; // 50 Dock SIO Present
- UINT8 DockComA; // 51 COM A Port
- UINT8 DockComB; // 52 COM B Port
- UINT8 LptP; // 53 LPT Port
- UINT8 DockFdc; // 54 FDC Port
- UINT8 OnboardCom; // 55 Onboard COM Port
- UINT8 OnboardComCir; // 56 Onboard COM CIR Port
-
- UINT8 WPCN381U; // 57
- UINT8 NPCE791x; // 58
- UINT8 Reserved5[1]; // 59
-
- //
- // Internal Graphics Device Values
- //
- UINT8 IgdState; // 60 IGD State (Primary Display = 1)
- UINT8 DisplayToggleList; // 61 Display Toggle List Selection
- UINT8 CurrentDeviceList; // 62 Current Attached Device List
- UINT8 PreviousDeviceList; // 63 Previous Attached Device List
- UINT16 CurrentDisplayState; // 64 Current Display State
- UINT16 NextDisplayState; // 66 Next Display State
- UINT16 SetDisplayState; // 68 Set Display State
- UINT8 NumberOfValidDeviceId; // 70 Number of Valid Device IDs
- UINT32 DeviceId1; // 71 Device ID 1
- UINT32 DeviceId2; // 75 Device ID 2
- UINT32 DeviceId3; // 79 Device ID 3
- UINT32 DeviceId4; // 83 Device ID 4
- UINT32 DeviceId5; // 87 Device ID 5
-
- UINT32 AKsv0; // 91:94 First four bytes of AKSV (manufacturing mode)
- UINT8 AKsv1; // 95 Fifth byte of AKSV (manufacturing mode
-
- UINT8 Reserved6[7]; // 96:102
-
- //
- // Backlight Control Values
- //
- UINT8 BacklightControlSupport; // 103 Backlight Control Support
- UINT8 BrightnessPercentage; // 104 Brightness Level Percentage
-
- //
- // Ambient Light Sensor Values
- //
- UINT8 AlsEnable; // 105 Ambient Light Sensor Enable
- UINT8 AlsAdjustmentFactor; // 106 Ambient Light Adjusment Factor
- UINT8 LuxLowValue; // 107 LUX Low Value
- UINT8 LuxHighValue; // 108 LUX High Value
-
- UINT8 Reserved7[1]; // 109
-
- //
- // Extended Mobile Access Values
- //
- UINT8 EmaEnable; // 110 EMA Enable
- UINT16 EmaPointer; // 111 EMA Pointer
- UINT16 EmaLength; // 113 EMA Length
-
- UINT8 Reserved8[1]; // 115
-
- //
- // Mobile East Fork Values
- //
- UINT8 MefEnable; // 116 Mobile East Fork Enable
-
- //
- // PCIe Dock Status
- //
- UINT8 PcieDockStatus; // 117 PCIe Dock Status
-
- UINT8 Reserved9[2]; // 118:119
-
- //
- // TPM Registers
- //
- UINT8 TpmPresent; // 120 TPM Present
- UINT8 TpmEnable; // 121 TPM Enable
-
- UINT8 MorData; // 122 Memory Overwrite Request Data
- UINT8 TcgParamter; // 123 Used for save the Mor and/or physical presence parameter
- UINT32 PPResponse; // 124 Physical Presence request operation response
- UINT8 PPRequest; // 128 Physical Presence request operation
- UINT8 LastPPRequest; // 129 Last Physical Presence request operation
-
- //
- // SATA Values
- //
- UINT8 GtfTaskFileBufferPort0[7]; // 130 GTF Task File Buffer for Port 0
- UINT8 GtfTaskFileBufferPort2[7]; // 137 GTF Task File Buffer for Port 2
- UINT8 IdeMode; // 144 IDE Mode (Compatible\Enhanced)
- UINT8 GtfTaskFileBufferPort1[7]; // 145:151 GTF Task File Buffer for Port 1
-
- UINT8 Reserved111[10]; // 152:161
- UINT64 BootTimeLogAddress; // 162:169 Boot Time Log Table Address
-
- UINT32 IgdOpRegionAddress; // 170 IGD OpRegion Starting Address
- UINT8 IgdBootType; // 174 IGD Boot Type CMOS option
- UINT8 IgdPanelType; // 175 IGD Panel Type CMOs option
- UINT8 IgdTvFormat; // 176 IGD TV Format CMOS option
- UINT8 IgdTvMinor; // 177 IGD TV Minor Format CMOS option
- UINT8 IgdPanelScaling; // 178 IGD Panel Scaling
- UINT8 IgdBlcConfig; // 179 IGD BLC Configuration
- UINT8 IgdBiaConfig; // 180 IGD BIA Configuration
- UINT8 IgdSscConfig; // 181 IGD SSC Configuration
- UINT8 Igd409; // 182 IGD 0409 Modified Settings Flag
- UINT8 Igd509; // 183 IGD 0509 Modified Settings Flag
- UINT8 Igd609; // 184 IGD 0609 Modified Settings Flag
- UINT8 Igd709; // 185 IGD 0709 Modified Settings Flag
- UINT8 IgdPowerConservation; // 186 IGD Power Conservation Feature Flag
- UINT8 IgdDvmtMemSize; // 187 IGD DVMT Memory Size
- UINT8 IgdFunc1Enable; // 188 IGD Function 1 Enable
- UINT8 IgdHpllVco; // 189 HPLL VCO
- UINT32 NextStateDid1; // 190 Next state DID1 for _DGS
- UINT32 NextStateDid2; // 194 Next state DID2 for _DGS
- UINT32 NextStateDid3; // 198 Next state DID3 for _DGS
- UINT32 NextStateDid4; // 202 Next state DID4 for _DGS
- UINT32 NextStateDid5; // 206 Next state DID5 for _DGS
- UINT32 NextStateDid6; // 210 Next state DID6 for _DGS
- UINT32 NextStateDid7; // 214 Next state DID7 for _DGS
- UINT32 NextStateDid8; // 218 Next state DID8 for _DGS
- UINT8 IgdSciSmiMode; // 222 GMCH SMI/SCI mode (0=SCI)
- UINT8 IgdPAVP; // 223 IGD PAVP data
- UINT8 IgdSelfRefresh; // 224 IGD Self Refresh
- UINT8 PcieOSCControl; // 225 PCIE OSC Control
- UINT8 NativePCIESupport; // 226 Native PCI Express Support
-
- //
- // USB Sideband Deferring Support
- //
- UINT8 HostAlertVector; // 227 GPE vector used for HOST_ALERT
- UINT8 HostAlertPio; // 228 PIO of USB device used for HOST_ALERT
-
- UINT8 Reserved112[27]; // 229
- UINT32 NvIgOpRegionAddress; // 256 NVIG support
- UINT32 NvHmOpRegionAddress; // 260 NVHM support
- UINT32 ApXmOpRegionAddress; // 264 AMDA support
- UINT32 DeviceId6; // 268 Device ID 6
- UINT32 DeviceId7; // 272 Device ID 7
- UINT32 DeviceId8; // 276 Device ID 8
- UINT32 EndpointBaseAddress; // 280 PEG Endpoint PCIe Base Address
- UINT32 CapStrPresence; // 284 PEG Endpoint Capability Structure Presence
- UINT32 EndpointPcieCapBaseAddress; // 288 PEG Endpoint PCIe Capability Structure Base Address
- UINT32 EndpointVcCapBaseAddress; // 292 PEG Endpoint Virtual Channel Capability Structure Base Address
- UINT32 XPcieCfgBaseAddress; // 296 Any Device's PCIe Config Space Base Address
- UINT32 OccupiedBuses1; // 300 Occupied Buses from 0 to 31
- UINT32 OccupiedBuses2; // 304 Occupied Buses from 32 to 63
- UINT32 OccupiedBuses3; // 308 Occupied Buses from 64 to 95
- UINT32 OccupiedBuses4; // 312 Occupied Buses from 96 to 127
- UINT32 OccupiedBuses5; // 316 Occupied Buses from 128 to 159
- UINT32 OccupiedBuses6; // 320 Occupied Buses from 160 to 191
- UINT32 OccupiedBuses7; // 324 Occupied Buses from 192 to 223
- UINT32 OccupiedBuses8; // 328 Occupied Buses from 224 to 255
- UINT8 UartSelection; // 332 UART Interface Selection 0: Internal; 1: SIO
- UINT8 PcuUart1Enable; // 333 PCU UART 1 Enabled
- UINT8 PcuUart2Enable; // 334 PCU UART 2 Enabled
-
- UINT32 LPEBar0; // 335~338 LPE Bar0
- UINT32 LPEBar1; // 339~342 LPE Bar1
-
- UINT32 LPEBar2; // 343~346 LPE Bar2
- UINT8 AcSetup; // 347 For Ac Powered Config option - IST applet
- UINT8 BatterySetup; // 348 For Battery Powered Config option - IST applet
- UINT8 PlatformFlavor; // 349 0:unknown 1: Mobile; 2: desktop
- UINT8 Reserved113[1]; // 350
-
- UINT8 IsctReserve; // 351 ISCT / AOAC Configuration
- UINT8 XhciMode; // 352 xHCI mode
- UINT8 PmicEnable; // 353 PMIC enable
-
- UINT8 LpeEnable; // 354 LPE enable
- UINT32 ISPAddr; // 355 ISP Base address
- UINT8 ISPDevSel; // 359 ISP device enabled selection 0: Disabled; 1: PCI Device 2; 2: PCI Device 3
-
- //
- // Lpss controllers
- //
- UINT32 PCIBottomAddress; //360 ((4+8+6)*4+2)*4=296
- UINT32 PCITopAddress; //364
-
- UINT32 LDMA1Addr; // 368
- UINT32 LDMA1Len; // 372
- UINT32 LDMA11Addr; // 376
- UINT32 LDMA11Len; // 380
- UINT32 PWM1Addr; // 384 PWM1
- UINT32 PWM1Len; // 388
- UINT32 PWM11Addr; // 392
- UINT32 PWM11Len; // 396
- UINT32 PWM2Addr; // 400 PWM2
- UINT32 PWM2Len; // 404
- UINT32 PWM21Addr; // 408
- UINT32 PWM21Len; // 412
- UINT32 UART1Addr; // 416 UART1
- UINT32 UART1Len; // 420
- UINT32 UART11Addr; // 424 UART1
- UINT32 UART11Len; // 428
- UINT32 UART2Addr; // 432 UART2
- UINT32 UART2Len; // 436
- UINT32 UART21Addr; // 440 UART2
- UINT32 UART21Len; // 444
- UINT32 SPIAddr; // 448 SPI
- UINT32 SPILen; // 452
- UINT32 SPI1Addr; // 456
- UINT32 SPI1Len; // 460
-
- UINT32 LDMA2Addr; // 464
- UINT32 LDMA2Len; // 468
- UINT32 LDMA21Addr; // 472
- UINT32 LDMA21Len; // 476
- UINT32 I2C1Addr; // 480 I2C1
- UINT32 I2C1Len; // 484
- UINT32 I2C11Addr; // 488 I2C1
- UINT32 I2C11Len; // 492
- UINT32 I2C2Addr; // 496 I2C2
- UINT32 I2C2Len; // 500
- UINT32 I2C21Addr; // 504 I2C2
- UINT32 I2C21Len; // 508
- UINT32 I2C3Addr; // 512 I2C3
- UINT32 I2C3Len; // 516
- UINT32 I2C31Addr; // 520 I2C3
- UINT32 I2C31Len; // 524
- UINT32 I2C4Addr; // 528 I2C4
- UINT32 I2C4Len; // 532
- UINT32 I2C41Addr; // 536 I2C4
- UINT32 I2C41Len; // 540
- UINT32 I2C5Addr; // 544 I2C5
- UINT32 I2C5Len; // 548
- UINT32 I2C51Addr; // 552 I2C5
- UINT32 I2C51Len; // 556
- UINT32 I2C6Addr; // 560 I2C6
- UINT32 I2C6Len; // 564
- UINT32 I2C61Addr; // 566 I2C6
- UINT32 I2C61Len; // 570
- UINT32 I2C7Addr; // 574 I2C7
- UINT32 I2C7Len; // 578
- UINT32 I2C71Addr; // 582 I2C7
- UINT32 I2C71Len; // 586
-
- //
- // Scc controllers
- //
- UINT32 eMMCAddr; // 590 EMMC
- UINT32 eMMCLen; // 594
- UINT32 eMMC1Addr; // 598
- UINT32 eMMC1Len; // 602
- UINT32 SDIOAddr; // 606 SDIO
- UINT32 SDIOLen; // 610
- UINT32 SDIO1Addr; // 614
- UINT32 SDIO1Len; // 618
- UINT32 SDCardAddr; // 622 SDCard
- UINT32 SDCardLen; // 626
- UINT32 SDCard1Addr; // 630
- UINT32 SDCard1Len; // 636
- UINT32 MipiHsiAddr; // 640 MIPI-HSI
- UINT32 MipiHsiLen; // 644
- UINT32 MipiHsi1Addr; // 648
- UINT32 MipiHsi1Len; // 652
-
- UINT8 SdCardRemovable; // 656 reserve offset upto 658
- UINT8 HideLPSSDevices; // 657 Hide unsupported LPSS devices when in ACPI mode
- UINT8 ReservedO; // 658 OS Selection
- UINT8 Reserved00; // 659
- UINT8 Reserved01; // 660
- UINT8 Reserved02; // 661
- UINT8 Reserved03; // 662
- UINT8 Reserved04; // 663
- UINT8 Reserved05; // 664
- UINT8 Reserved06; // 665
- UINT8 Reserved07; // 666
- UINT8 Reserved08; // 667
- UINT8 Reserved09; // 668
- UINT8 Reserved0A; // 669
- UINT32 Reserved0B; // 670
- UINT32 Reserved0C; // 674
- UINT32 Reserved0D; // 678
- UINT32 Reserved0E; // 682
- UINT32 Reserved0F; // 686
- UINT32 Reserved10; // 690
- UINT32 Reserved11; // 694
- UINT32 Reserved12; // 698
- UINT32 Reserved13; // 702
- UINT32 Reserved14; // 706
- UINT32 Reserved15; // 710
- UINT32 Reserved16; // 714
- UINT8 Reserved17;
- UINT32 Reserved18;
- UINT32 Reserved19;
- UINT32 Reserved1A;
- UINT32 Reserved1B;
- UINT32 Reserved1C;
- UINT8 Reserved1D;
- UINT32 Reserved1E;
- UINT32 Reserved1F;
- UINT32 Reserved20;
- UINT32 Reserved21;
- UINT32 Reserved22;
- UINT8 Reserved23;
- UINT8 BatteryChargingSolution; // 761 0-non ULPMC 1-ULPMC
-
- //
- //101 bytes
- //
- UINT8 NFCnSelect; // 762 NFCx Select 1: NFC1 2:NFC2
- UINT8 LpssSccMode; // 763 EMMC device 0-ACPI mode, 1-PCI mode
-
- UINT32 TPMAddress; // 764
- UINT32 TPMLength; // 768
-
- UINT8 I2CTouchAddress; // 772 I2C touch address, 0x4B:RVP 0x4A:FFRD
- UINT8 IdleReserve; // 773 0 - disabled 1 - enabled
- UINT8 SDIOMode; // 774 3 - Default 2 - DDR50
- UINT8 emmcVersion; // 775 0 - 4.41 1 - 4.5
- UINT32 BmBound; // 776 BM Bound
- UINT8 FsaStatus; // 780 0 - Fsa is off, 1- Fsa is on
-
- //
- // Board Id
- // This field is for the ASL code to know whether this board is Baylake or Bayley Bay etc
- //
- UINT8 BoardID; // 781
- UINT8 FabID; // 782
- UINT8 OtgMode; // 783 0- OTG disable 1- OTG PCI mode
- UINT8 Stepping; // 784 Stepping
- UINT8 WittEnable; // 785 WITT eanble 0 - disable 1 - enable
-
- UINT8 SocStepping; // 786 Soc Stepping infomation
- UINT8 AmbientTripPointChange; // 787 DPTF: Controls whether _ATI changes other participant's trip point(enabled/disabled)
- UINT8 UtsEnable; // 788 Uart Test eanble 0 - disable 1 - enable
- UINT8 DptfReserve; // 789
-
- UINT8 SarEnable; // 790
- UINT8 PssDeveice; // 791 PSS Deveice: 0 - None, 1 - Monzax 2K, 2 - Monzax 8K
- UINT8 EDPV; // 792 Check for eDP display device
- UINT32 DIDX; // 793 Device ID for eDP device
- UINT8 MicrosoftIoT; // (794)JP1 pins are for Microsoft IoT project.
- UINT8 RtcBattery; // (795) The Flag of RTC Battery Present.
- UINT8 LpeAudioReportedByDSDT; // (796)
-} EFI_GLOBAL_NVS_AREA;
-#pragma pack ()
-
-//
-// Global NVS Area Protocol
-//
-typedef struct _EFI_GLOBAL_NVS_AREA_PROTOCOL {
- EFI_GLOBAL_NVS_AREA *Area;
-} EFI_GLOBAL_NVS_AREA_PROTOCOL;
-
-#endif
-
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/HwWatchdogTimer.h b/Vlv2TbltDevicePkg/Include/Protocol/HwWatchdogTimer.h deleted file mode 100644 index 75c707162f..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/HwWatchdogTimer.h +++ /dev/null @@ -1,240 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- HwWatchdogTimer.h
-
-Abstract:
-
-
---*/
-
-#ifndef __EFI_WATCHDOG_TIMER_DRIVER_PROTOCOL_H__
-#define __EFI_WATCHDOG_TIMER_DRIVER_PROTOCOL_H__
-
-#define EFI_WATCHDOG_TIMER_DRIVER_PROTOCOL_GUID \
- { 0xd5b06d16, 0x2ea1, 0x4def, 0x98, 0xd0, 0xa0, 0x5d, 0x40, 0x72, 0x84, 0x17 }
-
-#define EFI_WATCHDOG_TIMER_NOT_SUPPORTED_PROTOCOL_GUID \
- { 0xe9e156ac, 0x3203, 0x4572, 0xac, 0xdf, 0x84, 0x4f, 0xdc, 0xdb, 0x6, 0xbf }
-
-
-#include <Guid/HwWatchdogTimerHob.h>
-
-//
-// General Purpose Constants
-//
-#define ICH_INSTAFLUSH_GPIO BIT16 // BIT 16 in GPIO Level 2 is GPIO 48.
-#define B_INSTAFLUSH BIT4
-
-//
-// Other Watchdog timer values
-//
-#define WDT_COUNTDOWN_VALUE 0x14
-#define BDS_WDT_COUNTDOWN_VALUE 0x35
-
-//
-// Prototypes for the Watchdog Timer Driver Protocol
-//
-
-/**
- This service begins the Watchdog Timer countdown. If the countdown completes prior to
- Stop Timer or Restart Timer the system will reset.
-
- @param[in] None
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_WATCHDOG_START_TIMER) (
- VOID
- );
-
-/**
- This service resets the Watchdog Timer countdown and should only be called after the
- Start Timer function.
-
- @param[in] None
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PEI_WATCHDOG_RESET_TIMER) (
- VOID
- );
-
-/**
- This service restarts the Watchdog Timer countdown and should only be called after the
- Start Timer function.
-
- @param[in] None
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_WATCHDOG_RESTART_TIMER) (
- VOID
- );
-
-/**
- This service disables the Watchdog Timer countdown.
-
- @param[in] None
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_WATCHDOG_STOP_TIMER) (
- VOID
- );
-
-/**
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_WATCHDOG_CHECK_TIMEOUT) (
- OUT HW_WATCHDOG_TIMEOUT *WatchdogTimeout
- );
-
-
-
-/**
- This service forces a reboot of the system due to a reset of the POWERGOOD_PS,
- POWERGOOD_CLK, and the BSEL Override
-
- Arguments:
- None
-
- Returns:
- This function should not return!
-
- EFI_DEVICE_ERROR - The command was unsuccessful and a reboot did not occur
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_WATCHDOG_FORCE_REBOOT) (
- IN BOOLEAN ForceTimeout,
- IN UINT8 ResetType
- );
-
-/**
- This service notifies the Watchdog Timer of the fact that a known reset is occuring.
-
- @param[in] AllowReset TRUE if a Reset is currently expected
- FALSE if a Reset is not currently expected
-
- This function should not return!
-
- EFI_DEVICE_ERROR - The command was unsuccessful and a reboot did not occur
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_WATCHDOG_KNOWN_RESET) (
- IN BOOLEAN AllowReset
- );
-
-/**
- This service reads the current Watchdog Timer countdown reload value.
-
- @param[in] CountdownValue pointer to UINT32 to return the value of the reload register.
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_GET_TIMER_COUNT_DOWN_PERIOD)(
- OUT UINT32 *CountdownValue
- );
-
-/**
- This service reads the current Watchdog Timer countdown reload value.
-
- @param[in] CountdownValue Value to set the reload register.
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SET_TIMER_COUNT_DOWN_PERIOD)(
- OUT UINT32 CountdownValue
- );
-
-/**
- This service clears the state that indicates the Watchdog Timer fired.
-
- @retval EFI_SUCCESS - Operation completed successfully
- @retval EFI_DEVICE_ERROR - The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PEI_WATCHDOG_CLEAR_TIMER_STATE) (
- );
-
-/**
- This service disables the Watchdog Timer countdown. It also closes the recurring restart event
- if the event exists.
-
- @param[in] Stall TRUE = Stop the timer countdown
- FALSE = Start the timer countdown
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_STALL_WATCHDOG_COUNTDOWN) (
- IN BOOLEAN Stall
- );
-
-
-typedef struct _EFI_WATCHDOG_TIMER_DRIVER_PROTOCOL {
- EFI_WATCHDOG_START_TIMER StartWatchdogTimer;
- PEI_WATCHDOG_RESET_TIMER ResetWatchdogTimeout;
- EFI_WATCHDOG_RESTART_TIMER RestartWatchdogTimer;
- EFI_WATCHDOG_STOP_TIMER StopWatchdogTimer;
- EFI_WATCHDOG_CHECK_TIMEOUT CheckWatchdogTimeout;
- EFI_WATCHDOG_FORCE_REBOOT ForceReboot;
- EFI_WATCHDOG_KNOWN_RESET AllowKnownReset;
- EFI_GET_TIMER_COUNT_DOWN_PERIOD GetCountdownPeriod;
- EFI_SET_TIMER_COUNT_DOWN_PERIOD SetCountdownPeriod;
- PEI_WATCHDOG_CLEAR_TIMER_STATE ClearTimerState;
- EFI_STALL_WATCHDOG_COUNTDOWN StallWatchdogCountdown;
-} EFI_WATCHDOG_TIMER_DRIVER_PROTOCOL;
-
-extern EFI_GUID gEfiWatchdogTimerDriverProtocolGuid;
-extern EFI_GUID gEfiWatchdogTimerNotSupportedProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cAcpi.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cAcpi.h deleted file mode 100644 index 14a0b7079e..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/I2cAcpi.h +++ /dev/null @@ -1,112 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-**/
-
-#ifndef __I2C_ACPI_H__
-#define __I2C_ACPI_H__
-
-#include <Protocol/DevicePath.h>
-
-//
-// I2C ACPI protocol
-//
-typedef struct _EFI_I2C_ACPI_PROTOCOL EFI_I2C_ACPI_PROTOCOL;
-
-//
-// I2C device description
-//
-// This structure provides the platform specific information which
-// describes an I2C device.
-//
-typedef struct {
- //
- // Hardware revision - ACPI _HRV value
- //
- UINT32 HardwareRevision;
-
- //
- // Device path node for the I2C device.
- //
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath;
-
- //
- // I2C bus configuration for the I2C device.
- //
- UINT32 I2cBusConfiguration;
-
- //
- // Number of slave addresses for the I2C device.
- //
- UINT32 SlaveAddressCount;
-
- //
- // Address of the array of slave addresses for the I2C device.
- //
- CONST UINT32 *SlaveAddressArray;
-}EFI_I2C_DEVICE;
-
-
-/**
- Enumerate the I2C devices
-
- This routine must be called at or below TPL_NOTIFY.
-
- This function walks the platform specific data to enumerates the
- I2C devices on an I2C bus.
-
- @param[in] This Address of an EFI_I2C_ENUM_PROTOCOL
- structure.
- @param[in, out] Device Buffer containing the address of an
- EFI_I2C_DEVICE structure. Enumeration
- is started by setting the initial
- EFI_I2C_DEVICE structure address to NULL.
- The buffer receives an EFI_I2C_DEVICE
- structure address for the next I2C device.
-
- @retval EFI_SUCCESS The platform data for the next device
- on the I2C bus was returned successfully.
- @retval EFI_INVALID_PARAMETER NextDevice was NULL
- @retval EFI_NO_MAPPING PreviousDevice does not point to a valid
- EFI_I2C_DEVICE structure.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_ACPI_ENUMERATE) (
- IN CONST EFI_I2C_ACPI_PROTOCOL *This,
- IN OUT CONST EFI_I2C_DEVICE **Device
- );
-
-//
-// I2C device description
-//
-// This structure provides the platform specific information which
-// describes an I2C device.
-//
-struct _EFI_I2C_ACPI_PROTOCOL {
- //
- // Walk the platform's list of I2C devices on the bus. This
- // routine returns the next I2C device in the platform's list
- // for this I2C bus.
- //
- EFI_I2C_ACPI_ENUMERATE Enumerate;
-};
-
-//
-// Variable containing the GUID for the I2C device enumeration protocol
-//
-extern EFI_GUID gEfiI2cAcpiProtocolGuid;
-
-#endif // __I2C_ACPI_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cBus.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cBus.h deleted file mode 100644 index d32837a921..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/I2cBus.h +++ /dev/null @@ -1,169 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-**/
-
-#ifndef __I2C_BUS_H__
-#define __I2C_BUS_H__
-
-#include <Protocol/I2cHostMcg.h>
-
-//
-// I2C bus protocol
-//
-typedef struct _EFI_I2C_BUS_PROTOCOL EFI_I2C_BUS_PROTOCOL;
-
-
-/**
- Perform an I2C operation on the device
-
- This routine must be called at or below TPL_NOTIFY. For synchronous
- requests this routine must be called at or below TPL_CALLBACK.
-
- N.B. The typical consumers of this API are the third party I2C
- drivers. Extreme care must be taken by other consumers of this
- API to prevent confusing the third party I2C drivers due to a
- state change at the I2C device which the third party I2C drivers
- did not initiate. I2C platform drivers may use this API within
- these guidelines.
-
- This routine queues an operation to the I2C controller for execution
- on the I2C bus.
-
- As an upper layer driver writer, the following need to be provided
- to the platform vendor:
-
- 1. ACPI CID value or string - this is used to connect the upper layer
- driver to the device.
- 2. Slave address array guidance when the I2C device uses more than one
- slave address. This is used to access the blocks of hardware within
- the I2C device.
-
- @param[in] This Address of an EFI_I2C_BUS_PROTOCOL
- structure
- @param[in] SlaveAddressIndex Index into an array of slave addresses for
- the I2C device. The values in the array are
- specified by the board designer, with the
- I2C device driver writer providing the slave
- address order.
-
- For devices that have a single slave address,
- this value must be zero. If the I2C device
- uses more than one slave address then the third
- party (upper level) I2C driver writer needs to
- specify the order of entries in the slave address
- array.
-
- \ref ThirdPartyI2cDrivers "Third Party I2C Drivers"
- section in I2cMaster.h.
- @param[in] Event Event to set for asynchronous operations,
- NULL for synchronous operations
- @param[in] RequestPacket Address of an EFI_I2C_REQUEST_PACKET
- structure describing the I2C operation
- @param[out] I2cStatus Optional buffer to receive the I2C operation
- completion status
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_ABORTED The request did not complete because the driver
- was shutdown.
- @retval EFI_ACCESS_DENIED Invalid SlaveAddressIndex value
- @retval EFI_BAD_BUFFER_SIZE The WriteBytes or ReadBytes buffer size is too large.
- @retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the operation.
- This could indicate the slave device is not present.
- @retval EFI_INVALID_PARAMETER RequestPacket is NULL
- @retval EFI_INVALID_PARAMETER TPL is too high
- @retval EFI_NO_RESPONSE The I2C device is not responding to the
- slave address. EFI_DEVICE_ERROR may also be
- returned if the controller can not distinguish
- when the NACK occurred.
- @retval EFI_NOT_FOUND I2C slave address exceeds maximum address
- @retval EFI_NOT_READY I2C bus is busy or operation pending, wait for
- the event and then read status pointed to by
- the request packet.
- @retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C operation
- @retval EFI_TIMEOUT The transaction did not complete within an internally
- specified timeout period.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_BUS_START_REQUEST) (
- IN CONST EFI_I2C_BUS_PROTOCOL *This,
- IN UINTN SlaveAddressIndex,
- IN EFI_EVENT Event OPTIONAL,
- IN CONST EFI_I2C_REQUEST_PACKET *RequestPacket,
- OUT EFI_STATUS *I2cStatus OPTIONAL
- );
-
-//
-// The I2C bus protocol enables access to a specific device on the I2C bus.
-//
-// Each I2C device is described as an ACPI node (HID, UID and CID) within the
-// platform layer. The I2C bus protocol enumerates the I2C devices in the
-// platform and creates a unique handle and device path for each I2C device.
-//
-// I2C slave addressing is abstracted to validate addresses and limit operation
-// to the specified I2C device. The third party providing the I2C device support
-// provides an ordered list of slave addresses for the I2C device to the team
-// building the platform layer. The platform team must preserve the order of the
-// supplied list. SlaveAddressCount is the number of entries in this list or
-// array within the platform layer. The third party device support references
-// a slave address using an index into the list or array in the range of zero
-// to SlaveAddressCount - 1.
-//
-struct _EFI_I2C_BUS_PROTOCOL {
- //
- // Start an I2C operation on the bus
- //
- EFI_I2C_BUS_START_REQUEST StartRequest;
-
- //
- // The maximum number of slave addresses for the I2C device. The caller may
- // validate this value as a check on the platform layer's configuration. Slave
- // address selection uses an index value in the range of zero to SlaveAddressCount - 1.
- //
- UINTN SlaveAddressCount;
-
- //
- // Hardware revision - Matches the ACPI _HRV value
- //
- // The HardwareRevision value allows a single driver to support multiple hardware
- // revisions and implement the necessary workarounds for limitations within the
- // hardware.
- //
- UINT32 HardwareRevision;
-
- //
- // The maximum number of bytes the I2C host controller
- // is able to receive from the I2C bus.
- //
- UINT32 MaximumReceiveBytes;
-
- //
- // The maximum number of bytes the I2C host controller
- // is able to send on the I2C bus.
- //
- UINT32 MaximumTransmitBytes;
-
- //
- // The maximum number of bytes in the I2C bus transaction.
- //
- UINT32 MaximumTotalBytes;
-};
-
-//
-// GUID for the I2C bus protocol
-//
-extern EFI_GUID gEfiI2cBusProtocolGuid;
-
-#endif // __I2C_BUS_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cBusMcg.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cBusMcg.h deleted file mode 100644 index 0fcadd5d2e..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/I2cBusMcg.h +++ /dev/null @@ -1,168 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-**/
-
-#ifndef __I2C_BUS_H__
-#define __I2C_BUS_H__
-
-#include <Protocol/I2cHostMcg.h>
-
-//
-// I2C bus protocol
-//
-typedef struct _EFI_I2C_BUS_PROTOCOL EFI_I2C_BUS_PROTOCOL;
-
-/**
- Perform an I2C operation on the device
-
- This routine must be called at or below TPL_NOTIFY. For synchronous
- requests this routine must be called at or below TPL_CALLBACK.
-
- N.B. The typical consumers of this API are the third party I2C
- drivers. Extreme care must be taken by other consumers of this
- API to prevent confusing the third party I2C drivers due to a
- state change at the I2C device which the third party I2C drivers
- did not initiate. I2C platform drivers may use this API within
- these guidelines.
-
- This routine queues an operation to the I2C controller for execution
- on the I2C bus.
-
- As an upper layer driver writer, the following need to be provided
- to the platform vendor:
-
- 1. ACPI CID value or string - this is used to connect the upper layer
- driver to the device.
- 2. Slave address array guidance when the I2C device uses more than one
- slave address. This is used to access the blocks of hardware within
- the I2C device.
-
- @param[in] This Address of an EFI_I2C_BUS_PROTOCOL
- structure
- @param[in] SlaveAddressIndex Index into an array of slave addresses for
- the I2C device. The values in the array are
- specified by the board designer, with the
- I2C device driver writer providing the slave
- address order.
-
- For devices that have a single slave address,
- this value must be zero. If the I2C device
- uses more than one slave address then the third
- party (upper level) I2C driver writer needs to
- specify the order of entries in the slave address
- array.
-
- \ref ThirdPartyI2cDrivers "Third Party I2C Drivers"
- section in I2cMaster.h.
- @param[in] Event Event to set for asynchronous operations,
- NULL for synchronous operations
- @param[in] RequestPacket Address of an EFI_I2C_REQUEST_PACKET
- structure describing the I2C operation
- @param[out] I2cStatus Optional buffer to receive the I2C operation
- completion status
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_ABORTED The request did not complete because the driver
- was shutdown.
- @retval EFI_ACCESS_DENIED Invalid SlaveAddressIndex value
- @retval EFI_BAD_BUFFER_SIZE The WriteBytes or ReadBytes buffer size is too large.
- @retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the operation.
- This could indicate the slave device is not present.
- @retval EFI_INVALID_PARAMETER RequestPacket is NULL
- @retval EFI_INVALID_PARAMETER TPL is too high
- @retval EFI_NO_RESPONSE The I2C device is not responding to the
- slave address. EFI_DEVICE_ERROR may also be
- returned if the controller can not distinguish
- when the NACK occurred.
- @retval EFI_NOT_FOUND I2C slave address exceeds maximum address
- @retval EFI_NOT_READY I2C bus is busy or operation pending, wait for
- the event and then read status pointed to by
- the request packet.
- @retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C operation
- @retval EFI_TIMEOUT The transaction did not complete within an internally
- specified timeout period.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_BUS_START_REQUEST) (
- IN CONST EFI_I2C_BUS_PROTOCOL *This,
- IN UINTN SlaveAddressIndex,
- IN EFI_EVENT Event OPTIONAL,
- IN CONST EFI_I2C_REQUEST_PACKET *RequestPacket,
- OUT EFI_STATUS *I2cStatus OPTIONAL
- );
-
-//
-// The I2C bus protocol enables access to a specific device on the I2C bus.
-//
-// Each I2C device is described as an ACPI node (HID, UID and CID) within the
-// platform layer. The I2C bus protocol enumerates the I2C devices in the
-// platform and creates a unique handle and device path for each I2C device.
-//
-// I2C slave addressing is abstracted to validate addresses and limit operation
-// to the specified I2C device. The third party providing the I2C device support
-// provides an ordered list of slave addresses for the I2C device to the team
-// building the platform layer. The platform team must preserve the order of the
-// supplied list. SlaveAddressCount is the number of entries in this list or
-// array within the platform layer. The third party device support references
-// a slave address using an index into the list or array in the range of zero
-// to SlaveAddressCount - 1.
-//
-struct _EFI_I2C_BUS_PROTOCOL {
- //
- // Start an I2C operation on the bus
- //
- EFI_I2C_BUS_START_REQUEST StartRequest;
-
- //
- // The maximum number of slave addresses for the I2C device. The caller may
- // validate this value as a check on the platform layer's configuration. Slave
- // address selection uses an index value in the range of zero to SlaveAddressCount - 1.
- //
- UINTN SlaveAddressCount;
-
- //
- // Hardware revision - Matches the ACPI _HRV value
- //
- // The HardwareRevision value allows a single driver to support multiple hardware
- // revisions and implement the necessary workarounds for limitations within the
- // hardware.
- //
- UINT32 HardwareRevision;
-
- //
- // The maximum number of bytes the I2C host controller
- // is able to receive from the I2C bus.
- ///
- UINT32 MaximumReceiveBytes;
-
- //
- // The maximum number of bytes the I2C host controller
- // is able to send on the I2C bus.
- //
- UINT32 MaximumTransmitBytes;
-
- //
- // The maximum number of bytes in the I2C bus transaction.
- //
- UINT32 MaximumTotalBytes;
-};
-
-//
-// GUID for the I2C bus protocol
-//
-extern EFI_GUID gEfiI2cBusProtocolGuid;
-
-#endif // __I2C_BUS_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cHostMcg.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cHostMcg.h deleted file mode 100644 index 3395043d3e..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/I2cHostMcg.h +++ /dev/null @@ -1,143 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-**/
-
-#ifndef __I2C_HOST_H__
-#define __I2C_HOST_H__
-
-#include <Protocol/I2cMasterMcg.h>
-
-/**
- Declare the forward references
-
-**/
-typedef struct _EFI_I2C_HOST_PROTOCOL EFI_I2C_HOST_PROTOCOL;
-typedef struct _EFI_I2C_HOST_CALLBACKS EFI_I2C_HOST_CALLBACKS;
-
-
-/**
- Queue an I2C operation for execution on the I2C controller.
-
- This routine must be called at or below TPL_NOTIFY. For synchronous
- requests this routine must be called at or below TPL_CALLBACK.
-
- N.B. The typical consumers of this API are the I2C bus driver and
- on rare occasions the I2C test application. Extreme care must be
- taken by other consumers of this API to prevent confusing the
- third party I2C drivers due to a state change at the I2C device
- which the third party I2C drivers did not initiate. I2C platform
- drivers may use this API within these guidelines.
-
- This layer uses the concept of I2C bus configurations to describe
- the I2C bus. An I2C bus configuration is defined as a unique
- setting of the multiplexers and switches in the I2C bus which
- enable access to one or more I2C devices. When using a switch
- to divide a bus, due to speed differences, the I2C platform layer
- would define an I2C bus configuration for the I2C devices on each
- side of the switch. When using a multiplexer, the I2C platform
- layer defines an I2C bus configuration for each of the selector
- values required to control the multiplexer. See Figure 1 in the
- <a href="http://www.nxp.com/documents/user_manual/UM10204.pdf">I<sup>2</sup>C
- Specification</a> for a complex I2C bus configuration.
-
- The I2C host driver processes all operations in FIFO order. Prior to
- performing the operation, the I2C host driver calls the I2C platform
- driver to reconfigure the switches and multiplexers in the I2C bus
- enabling access to the specified I2C device. The I2C platform driver
- also selects the maximum bus speed for the device. After the I2C bus
- is configured, the I2C host driver calls the I2C port driver to
- initialize the I2C controller and start the I2C operation.
-
- @param[in] This Address of an EFI_I2C_HOST_PROTOCOL instance.
- @param[in] I2cBusConfiguration I2C bus configuration to access the I2C
- device.
- @param[in] SlaveAddress Address of the device on the I2C bus.
- @param[in] Event Event to set for asynchronous operations,
- NULL for synchronous operations
- @param[in] RequestPacket Address of an EFI_I2C_REQUEST_PACKET
- structure describing the I2C operation
- @param[out] I2cStatus Optional buffer to receive the I2C operation
- completion status
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_ABORTED The request did not complete because the driver
- was shutdown.
- @retval EFI_BAD_BUFFER_SIZE The WriteBytes or ReadBytes buffer size is too large.
- @retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the operation.
- This could indicate the slave device is not present.
- @retval EFI_INVALID_PARAMETER RequestPacket is NULL
- @retval EFI_INVALID_PARAMETER TPL is too high
- @retval EFI_NO_MAPPING Invalid I2cBusConfiguration value
- @retval EFI_NO_RESPONSE The I2C device is not responding to the
- slave address. EFI_DEVICE_ERROR may also be
- returned if the controller cannot distinguish
- when the NACK occurred.
- @retval EFI_NOT_FOUND I2C slave address exceeds maximum address
- @retval EFI_NOT_READY I2C bus is busy or operation pending, wait for
- the event and then read status pointed to by
- the request packet.
- @retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C operation
- @retval EFI_TIMEOUT The transaction did not complete within an internally
- specified timeout period.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_HOST_QUEUE_REQUEST) (
- IN CONST EFI_I2C_HOST_PROTOCOL *This,
- IN UINTN I2cBusConfiguration,
- IN UINTN SlaveAddress,
- IN EFI_EVENT Event OPTIONAL,
- IN CONST EFI_I2C_REQUEST_PACKET *RequestPacket,
- OUT EFI_STATUS *I2cStatus OPTIONAL
- );
-
-///
-/// Host access to the I2C bus.
-///
-struct _EFI_I2C_HOST_PROTOCOL {
- ///
- /// Queue an operation for execution on the I2C bus
- ///
- EFI_I2C_HOST_QUEUE_REQUEST QueueRequest;
-
- ///
- /// The maximum number of I2C bus configurations
- ///
- UINTN I2cBusConfigurationCount;
-
- ///
- /// The maximum number of bytes the I2C host controller
- /// is able to receive from the I2C bus.
- ///
- UINT32 MaximumReceiveBytes;
-
- ///
- /// The maximum number of bytes the I2C host controller
- /// is able to send on the I2C bus.
- ///
- UINT32 MaximumTransmitBytes;
-
- ///
- /// The maximum number of bytes in the I2C bus transaction.
- ///
- UINT32 MaximumTotalBytes;
-};
-
-///
-/// GUID for the EFI_I2C_HOST_PROTOCOL
-///
-extern EFI_GUID gEfiI2cHostProtocolGuid;
-
-#endif // __I2C_HOST_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cMasterMcg.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cMasterMcg.h deleted file mode 100644 index f239b5ec2f..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/I2cMasterMcg.h +++ /dev/null @@ -1,524 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
- \section I2cDriverStack I2C Driver Stack
-
- The following is a representation of the I<sup>2</sup>C (I2C)
- driver stack and an I2C bus layout.
-
- <code><pre>
- +-----------------+
- | Application |
- +-----------------+
- |
- | Third Party or UEFI
- |
- V
- +--------+ +-----------------+
- | Slave | | Third Party |
- | Driver | | I2C Device |
- | | | Driver |
- +--------+ +-----------------+
- | |
- | BUS |
- | |
- | V
- | +-----------------+
- | | I2C Bus Driver |------------------.
- | +-----------------+ |
- | | |
- | HOST | BUS |
- | | CONFIGURATION |
-SLAVE | V MANAGEMENT | ACPI
- | +-----------------+ |
- | | I2C Host Driver |----------. |
- | +-----------------+ | |
- | | | |
- | MASTER | V V
- | | +-------=-------------+
- | V | I2C Platform Driver |
- | +-----------------+ +---------------------+
- `------>| I2C Port Driver | | |
- +-----------------+ | |
- | | |
- Software | | |
- --------------------------------------------------
- Hardware | | |
- | | |
- V | |
- +-----------------+ | |
- | I2C Controller | | |
- +-----------------+ | |
- | | |
- ----------------------- | |
- I2C Bus | | |
- | +------------+ | |
- +----| High speed | | |
- | | I2C device | | |
- | | 0x01 | | |
- | +------------+ | |
- | | |
- +---------+ 0 | |
- | Switch |<------------------` |
- +---------+ 1 |
- | |
- | +------------+ |
- +----| Fast speed | |
- | | I2C device | |
- | | 0x02 | |
- | +------------+ |
- | |
- +-------------+ |
- | Multiplexer |<-----------------------`
- +-------------+
- 0 | | 1
- | |
- | |
- | | +-------------+
- | +----| Third Party |
- | | | I2C Device |
- | | | 0x03, 0x04 |
- | | +-------------+
- | |
- |
- | +-------------+
- +------------| Third Party |
- | | I2C Device |
- | | 0x03, 0x04 |
- | +-------------+
- |
- </pre></code>
-
- The platform hardware designer chooses the bus layout based upon
- the platform, I2C chip and software requirements. The design uses
- switches to truncate the bus to enable higher speed operation for a
- subset of devices which are placed closer to the controller. When the
- switch is on, the extended bus must operate at a lower speed. The
- design uses multiplexer to create separate address spaces enabling
- the use of multiple devices which would otherwise have conflicting
- addresses. See the
- <a href="http://www.nxp.com/documents/user_manual/UM10204.pdf">I<sup>2</sup>C
- Specification</a> for more details.
-
- N.B. Some operating systems may prohibit the changing of switches
- and multiplexers in the I2C bus. In this case the platform hardware
- and software designers must select a single I2C bus configuration
- consisting of constant input values for the switches and multiplexers.
- The platform software designer must then ensure that this I2C bus
- configuration is enabled prior to passing control to the operating
- system.
-
- The platform hardware designer needs to provide the platform software
- designer the following data for each I2C bus:
-
- 1. Which controller controls this bus
-
- 2. A list of logic blocks contained in one or more I2C devices:
-
- a. I2C device which contains this logic block
-
- b. Logic block slave address
-
- c. Logic block name
-
- 3. For each configuration of the switches and multiplexer
-
- a. What is the maximum speed of operation
-
- b. What devices are accessible
-
- 4. The settings for the switches and multiplexers when control is
- given to the operating system.
-
- \section ThirdPartyI2cDrivers Third Party I2C Drivers
-
- This layer is I2C chip specific but platform and host controller
- independent.
-
- Third party I2C driver writers, typically silicon vendors, need
- to provide:
-
- 1. The device path node data that is used to select their
- driver.
-
- 2. The order for the blocks of logic that get referenced
- by the entries in the slave address array.
-
- 3. The hardware version of the I2C device, this value is passed
- to the third party I2C driver to enable it to perform work
- arounds for the specific hardware version. This value should
- match the value in the ACPI _HRV tag.
-
- The third party I2C driver uses relative addressing to abstract
- the platform specific details of the I2C device. Using an
- example I2C device containing an accelerometer and a magnetometer
- which consumes two slave addresses, one for each logic block. The
- third party I2C driver writer may choose to write two drivers, one
- for each block of logic, in which case each driver refers to the
- single I2C slave address using the relative value of zero (0).
- However if the third party I2C driver writer chooses to write a
- single driver which consumes multiple slave addresses then the
- third party I2C driver writer needs to convey the order of the
- I2C slave address entries in the slave address array to the
- platform software designer. For the example:
-
- 0: Accelerometer
-
- 1: Magnetometer
-
- The platform hardware designer picks the actual slave addresses
- from the I2C device's data sheet and provides this information
- to the platform software designer. The platform software designer
- then places the slave addresses into the slave address array in the
- order specified by the third party I2C driver writer. The third
- party driver I2C writer then indirectly references this array by
- specifying the index value as the relative slave address. The
- relative value always starts at zero (0) and its maximum value is
- the number of entries in slave address array minus one.
-
- The slave address is specified as a 32-bit integer to allow room
- for future slave address expansion. Only the port driver knows
- the maximum slave address value. All other drivers and
- applications must look for the EFI_NOT_FOUND status for the
- indication that the maximum slave address was exceeded.
-
- \section I2cBusDriver I2C Bus Driver
-
- This layer is platform, host controller, and I2C chip independent.
-
- The I2C bus driver creates a handle for each of the I2C devices
- described within the platform driver. The I2C controller's device
- path is extended with the device path node provided by the platform
- driver and attached to the handle. The third party I2C device driver
- uses the device path to determine if it may connect. For ACPI nodes,
- the third party I2C driver should use the CID or CidString value.
-
- The I2C bus driver validates the relative address for the I2C device
- and then converts the relative value to an actual I2C slave address.
- The request is then passed to the I2C host driver.
-
- \section I2cHostDriver I2C Host Driver
-
- This layer is platform, host controller, and I2C chip independent.
-
- N.B. For proper operation of the I2C bus, only the I2C bus driver
- and the I2C test application should connect to the I2C host driver
- via the EFI_I2C_HOST_DRIVER_PROTOCOL.
-
- The I2C host driver may access any device on the I2C bus. The I2C
- host driver has the following responsibilities:
-
- 1. Limits the number of requests to the I2C port driver to one.
- The I2C host driver holds on to additional requests until the
- I2C port driver is available to process the request. The I2C
- requests are issued in FIFO order to the I2C port driver.
-
- 2. Enable the proper I2C bus configuration before starting the
- I2C request on the I2C port driver
-
- I2C devices are addressed as the tuple: BusConfiguration:SlaveAddress.
- I2C bus configuration zero (0) is the portion of the I2C bus that
- connects to the host controller. The bus configuration specifies
- the control values for the switches and multiplexers in the I2C bus.
- After the switches and multiplexers are properly configured, the I2C
- controller uses the slave address to access the requested I2C device.
-
- Since the I2C driver stack supports asynchronous operations this
- layer maintains a queue of I2C requests until the I2C controller
- is available them. When a request reaches the head of the queue
- the necessary bus configuration is enabled and then the request
- is sent to the I2C port driver.
-
- \section I2cPortDriver I2C Port Driver
-
- This layer is I2C controller specific but platform independent.
-
- This layer manipulates the I2C controller to perform an operation
- on the I2C bus. This layer does not configure the I2C bus so it
- is up to the caller to ensure that the I2C bus is in the proper
- configuration before issuing the I2C request.
-
- This layer typically needs the following information:
-
- 1. Host controller address
- 2. Controller's input clock frequency
-
- Depending upon the I2C controller, more data may be necessary.
- This layer may use any method to get these values: hard coded
- values, PCD values, or may choose to communicate with the platform
- layer using an undefined mechanism to get these values.
-
- If the I2C port driver requires data from the platform driver then
- the I2C port driver writer needs to provide the platform interface
- details to the platform software designer.
-
- \section I2cPlatformDriver I2C Platform Driver
-
- When enabling access to I2C devices within UEFI, this driver
- installs the EFI_I2C_ACPI_PROTOCOL to provide the I2C device
- descriptions to the I2C bus driver using the EFI_I2C_DEVICE
- structure. These descriptions include the bus configuration
- number required for the I2C device, the slave address array
- and the device path.
-
- The EFI_I2C_BUS_CONFIGURATION_MANAGEMENT protocol is optional.
- This protocol needs to be specified under the following conditions:
-
- 1. The I2C bus must operate at a frequency greater than 100 KHz
- 2. The I2C bus contains switches or multiplexers.
-
- The EFI_I2C_BUS_CONFIGURATION_MANAGEMENT protocol enables the
- I2C host driver to call into the I2C platform driver to enable
- a specific I2C bus configuration and set its maximum clock speed.
-
- The platform software designer collects the data requirements
- from third party I2C driver writers, the I2C controller
- driver writer, the EFI_I2C_ACPI_PROTOCOL and
- EFI_I2C_BUS_CONFIGURATION_MANAGEMENT_PROTOCOL. The platform
- software designer gets the necessary data from the platform
- hardware designer. The platform software designer then builds
- the data structures and implements the necessary routines to
- construct the I2C platform driver.
-
- \section I2cSwitches Switches and Multiplexers
-
- There are some I2C switches and I2C multiplexers where the control
- is done via I2C commands. When the control inputs come via the
- same I2C bus that is being configured then the platform driver must
- use the EFI_I2C_MASTER_PROTOCOL that is passed to the platform
- driver. While the I2C host driver makes the call to the I2C
- platform driver to configure the bus, the host driver keeps the
- I2C port driver idle, to allow the I2C platform driver preform
- the necessary configuration operations.
-
- If however the configuration control is done via and I2C device
- connected to a different I2C bus (host controller), then it is
- possible for the platform software designer may choose between
- the following:
-
- 1. Call into a third party I2C driver to manipulate the I2C
- bus control device.
- 2. Call into the EFI_I2C_BUS_PROTOCOL if no third party I2C
- driver exists for the I2C bus control device
- 3. Call into the EFI_I2C_HOST_PROTOCOL if the platform does
- not expose the I2C bus control device.
-
-**/
-
-#ifndef __I2C_MASTER_H__
-#define __I2C_MASTER_H__
-
-/**
- Declare the forward references
-
-**/
-typedef struct _EFI_I2C_MASTER_PROTOCOL EFI_I2C_MASTER_PROTOCOL; ///< I2C master protocol
-
-///
-/// I2C device operation
-///
-/// This structure provides the information necessary for an operation
-/// on an I2C device
-///
-typedef struct {
- ///
- /// Number of bytes to send to the I2C device
- ///
- UINT32 WriteBytes;
-
- ///
- /// Number of bytes to read, set to zero for write only operations
- ///
- UINT32 ReadBytes;
-
- ///
- /// Address of the buffer containing the data to send to the I2C device.
- /// The WriteBuffer must be at least WriteBytes in length.
- ///
- UINT8 *WriteBuffer;
-
- ///
- /// Address of the buffer to receive data from the I2C device. Use NULL
- /// for write only operations. The ReadBuffer must be at least ReadBytes
- /// in length.
- ///
- UINT8 *ReadBuffer;
-
- ///
- /// Timeout for the I2C operation in 100 ns units
- ///
- UINT32 Timeout;
-} EFI_I2C_REQUEST_PACKET;
-
-
-/**
- Set the I2C controller bus clock frequency.
-
- This routine must be called at or below TPL_NOTIFY.
-
- The software and controller do a best case effort of using the specified
- frequency for the I2C bus. If the frequency does not match exactly then
- the controller will use a slightly lower frequency to avoid
- exceeding the operating conditions for any of the I2C devices on the bus.
- For example if 400 KHz was specified and the controller's divide network
- only supports 402 KHz or 398 KHz then the controller would be set to 398
- KHz. However if the desired frequency is 400 KHz and the controller only
- supports 1 MHz and 100 KHz then this routine would return EFI_UNSUPPORTED.
-
- @param[in] This Address of an EFI_I2C_MASTER_PROTOCOL
- structure
- @param[in] BusClockHertz New I2C bus clock frequency in Hertz
-
- @retval EFI_SUCCESS The bus frequency was set successfully.
- @retval EFI_UNSUPPORTED The controller does not support this frequency.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_MASTER_BUS_FREQUENCY_SET) (
- IN CONST EFI_I2C_MASTER_PROTOCOL *This,
- IN UINTN BusClockHertz
- );
-
-/**
- Reset the I2C controller and configure it for use
-
- This routine must be called at or below TPL_NOTIFY.
-
- The I2C controller is reset and the I2C bus frequency is set to 100 KHz.
-
- @param[in] This Address of an EFI_I2C_MASTER_PROTOCOL
- structure
-
-**/
-typedef
-VOID
-(EFIAPI *EFI_I2C_MASTER_RESET) (
- IN CONST EFI_I2C_MASTER_PROTOCOL *This
- );
-
-/**
- Start an I2C operation on the host controller
-
- This routine must be called at or below TPL_NOTIFY. For synchronous
- requests this routine must be called at or below TPL_CALLBACK.
-
- This function initiates an I2C operation on the controller.
-
- The operation is performed by selecting the I2C device with its slave
- address and then sending all write data to the I2C device. If read data
- is requested, a restart is sent followed by the slave address and then
- the read data is clocked into the I2C controller and placed in the read
- buffer. When the operation completes, the status value is returned and
- then the event is set.
-
- N.B. The typical consumer of this API is the I2C host driver.
- Extreme care must be taken by other consumers of this API to
- prevent confusing the third party I2C drivers due to a state
- change at the I2C device which the third party I2C drivers did
- not initiate. I2C platform drivers may use this API within
- these guidelines.
-
- N.B. This API supports only one operation, no queuing support
- exists at this layer. This API assumes that the I2C bus is in
- the correct configuration for the I2C request.
-
- @param[in] This Address of an EFI_I2C_MASTER_PROTOCOL
- structure
- @param[in] SlaveAddress Address of the device on the I2C bus.
- @param[in] Event Event to set for asynchronous operations,
- NULL for synchronous operations
- @param[in] RequestPacket Address of an EFI_I2C_REQUEST_PACKET
- structure describing the I2C operation
- @param[out] I2cStatus Optional buffer to receive the I2C operation
- completion status
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_ABORTED The request did not complete because the driver
- was shutdown.
- @retval EFI_BAD_BUFFER_SIZE The WriteBytes or ReadBytes buffer size is too large.
- @retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the operation.
- This could indicate the slave device is not present.
- @retval EFI_INVALID_PARAMETER RequestPacket is NULL
- @retval EFI_INVALID_PARAMETER TPL is too high
- @retval EFI_NOT_FOUND SlaveAddress exceeds maximum address
- @retval EFI_NOT_READY I2C bus is busy or operation pending, wait for
- the event and then read status pointed to by
- the request packet.
- @retval EFI_NO_RESPONSE The I2C device is not responding to the
- slave address. EFI_DEVICE_ERROR may also be
- returned if the controller cannot distinguish
- when the NACK occurred.
- @retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C operation
- @retval EFI_TIMEOUT The transaction did not complete within an internally
- specified timeout period.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_MASTER_START_REQUEST) (
- IN CONST EFI_I2C_MASTER_PROTOCOL *This,
- IN UINTN SlaveAddress,
- IN EFI_EVENT Event OPTIONAL,
- IN CONST EFI_I2C_REQUEST_PACKET *RequestPacket,
- OUT EFI_STATUS *I2cStatus OPTIONAL
- );
-
-///
-/// I2C master mode protocol
-///
-/// This protocol manipulates the I2C host controller to perform transactions as a
-/// master on the I2C bus using the current state of any switches or multiplexers
-/// in the I2C bus.
-///
-struct _EFI_I2C_MASTER_PROTOCOL {
- ///
- /// Set the clock frequency for the I2C bus
- ///
- EFI_I2C_MASTER_BUS_FREQUENCY_SET BusFrequencySet;
-
- ///
- /// Reset the I2C host controller
- ///
- EFI_I2C_MASTER_RESET Reset;
-
- ///
- /// Start an I2C transaction in master mode on the host controller
- ///
- EFI_I2C_MASTER_START_REQUEST StartRequest;
-
- ///
- /// The maximum number of bytes the I2C host controller
- /// is able to receive from the I2C bus.
- ///
- UINT32 MaximumReceiveBytes;
-
- ///
- /// The maximum number of bytes the I2C host controller
- /// is able to send on the I2C bus.
- ///
- UINT32 MaximumTransmitBytes;
-
- ///
- /// The maximum number of bytes in the I2C bus transaction.
- ///
- UINT32 MaximumTotalBytes;
-};
-
-///
-/// GUID for the EFI_I2C_MASTER_PROTOCOL
-///
-extern EFI_GUID gEfiI2cMasterProtocolGuid;
-
-#endif // __I2C_MASTER_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cSlave.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cSlave.h deleted file mode 100644 index ba094ff807..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/I2cSlave.h +++ /dev/null @@ -1,199 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-**/
-
-#ifndef __I2C_SLAVE_H__
-#define __I2C_SLAVE_H__
-
-#include <Protocol/I2cHostMcg.h>
-
-/**
- Declare the forward references
-
-**/
-typedef struct _EFI_I2C_SLAVE_PROTOCOL EFI_I2C_SLAVE_PROTOCOL; ///< I2C slave protocol
-
-/**
- The I2C controller received a data byte from the
- I2C msster.
-
- @param[in] Context The value passed to the slave enable routine.
- @param[in] NumberOfBytes Number of data bytes received
- @param[in] Data Buffer containing the received data bytes
-
- @retval EFI_SUCCESS ACK the data byte
- @retval EFI_UNSUPPORTED NACK the data byte
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_SLAVE_RECEIVE_DATA) (
- IN VOID *Context,
- IN UINTN NumberOfBytes,
- IN CONST UINT8 *Data
- );
-
-/**
- The I2C controller received the start bit from the
- I2C master.
-
- @param[in] Context The value passed to the slave enable routine.
-
-**/
-typedef
-VOID
-(EFIAPI *EFI_I2C_SLAVE_RECEIVE_START) (
- IN VOID *Context,
- IN UINTN BytesSent,
- IN EFI_STATUS Status
- );
-
-/**
- The I2C controller received the stop bit from the
- I2C master.
-
- @param[in] Context The value passed to the slave enable routine.
- @param[in] BytesSent Number of bytes successfully ACKed by the
- I2C master. This is a hint, not all I2C
- controllers support the ability to return
- the number of bytes sent. When it is not
- possible, the port driver returns zero.
- @param[in] Status <ul>
- <li>EFI_SUCCESS - All of the data was successfully sent</li>
- <li>EFI_ABORTED - The controller was reset</li>
- <li>EFI_DEVICE_ERROR - A NACK was received when sending the data.</li>
- <li>EFI_END_OF_FILE - The stop bit was received before all of
- the data was sent.</li>
- </ul>
-
-**/
-typedef
-VOID
-(EFIAPI *EFI_I2C_SLAVE_RECEIVE_STOP) (
- IN VOID *Context,
- IN UINTN BytesSent,
- IN EFI_STATUS Status
- );
-
-/**
- Enable or disable I2C slave operation.
-
- The ReceiveData callback allows the port driver to return data
- to the driver or application handling slave mode operations. This
- is data that a remote master has sent to the local I2C controller.
- The data may be returned one byte at a time if the controller supports
- the ability to ACK/NACK on each receive byte. If not, a block of
- data may be returned by the I2C port driver and the ACK/NACK status
- is used only as a hint for the port driver.
-
- The slave mode driver or application should buffer the data until
- either ReceiveStart or ReceiveStop is called. At that time all of
- the data is received and the command may be processed.
-
- ReceiveStart is called when the I2C master is expecting a response.
- After processing the command, but before sending the response the
- slave driver or application should mark the command as processed to
- avoid processing it a second time when ReceiveStop is called. The
- slave driver or application then calls SendData to send to queue the
- response data for transmission. The data must remain valid in the
- WriteBuffer until ReceiveStop is called.
-
- ReceiveStop is called when the stop bit is received on the I2C bus.
- The slave driver or application starts processing the command if an
- command data is pending in the slave driver's or application's buffer.
- The BytesSent value is a hint to the slave driver or application as
- to how much data was returned to the I2C master. If the controller
- does not provide this level of support then this value is set to zero.
-
- @param[in] This Address of an EFI_I2C_SLAVE_PROTOCOL
- structure
- @param[in] SlaveAddress Slave address for the I2C controller
- @param[in] Context Address of a context structure for use when
- calling ReceiveData or ReceiveStop
- @param[in] ReceiveData Called by the I2C port driver as data bytes
- are received from the master. Response status
- indicates if the byte is ACKed or NACKed. When
- data is passed back a byte at a time, the port
- driver must hold the clock until this callback
- returns.
- @param[in] ReceiveStart Called when the I2C controller receives a start bit.
- @param[in] ReceiveStop Called after all of the data bytes are
- received.
-
- @retval EFI_SUCCESS Slave operation is enabled on the controller.
- @retval EFI_UNSUPPORTED The controller does not support this frequency.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_SLAVE_ENABLE) (
- IN CONST EFI_I2C_SLAVE_PROTOCOL *This,
- IN UINT32 SlaveAddress,
- IN VOID *Context,
- IN EFI_I2C_SLAVE_RECEIVE_DATA ReceiveData,
- IN EFI_I2C_SLAVE_RECEIVE_START ReceiveStart,
- IN EFI_I2C_SLAVE_RECEIVE_STOP ReceiveStop
- );
-
-/**
- Send data to the I2C master.
-
- Port drivers may implement this as a blocking or non-blocking call.
- The data in the write buffer must remain valid until ReceiveStop or
- ReceiveStart is called indicating that the I2C master has terminated
- the transfer.
-
- @param[in] This Address of an EFI_I2C_SLAVE_PROTOCOL
- structure
- @param[in] WriteBytes Number of bytes to write
- @param[in] WriteBuffer Buffer containing the data to send
-
- @retval EFI_SUCCESS Data waiting for master access.
- @retval EFI_INVALID_PARAMETER WriteBuffer is NULL or WriteBytes
- is zero.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_SLAVE_SEND) (
- IN CONST EFI_I2C_SLAVE_PROTOCOL *This,
- IN UINTN WriteBytes,
- IN CONST UINT8 *WriteBuffer
- );
-
-///
-/// I2C slave protocol
-///
-/// The port driver publishes this protocol when slave mode is
-/// supported by the controller.
-///
-struct _EFI_I2C_SLAVE_PROTOCOL {
- ///
- /// Enable or disable I2C slave operation
- ///
- EFI_I2C_SLAVE_ENABLE SlaveEnable;
-
- ///
- /// Send data to the I2C master
- ///
- EFI_I2C_SLAVE_SEND SendData;
-};
-
-///
-/// GUID for the EFI_I2C_SLAVE_PROTOCOL
-///
-extern EFI_GUID gEfiI2cSlaveProtocolGuid;
-
-#endif // __I2C_SLAVE_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/LpcWpc83627Policy.h b/Vlv2TbltDevicePkg/Include/Protocol/LpcWpc83627Policy.h deleted file mode 100644 index d7b54bedf9..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/LpcWpc83627Policy.h +++ /dev/null @@ -1,97 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- LpcWpc83667Policy.h
-
-Abstract:
-
- Protocol used for WPC83627 Policy definition.
--------------------------------------------------------------------------------
- Rev Date<MM/DD/YYYY> Name Description
- -------------------------------------------------------------------------------
- R01 < 4/22/2011> LB Update driver for Sio83627UGH support.
- -------------------------------------------------------------------------------
-**/
-
-#ifndef _WPC83627_POLICY_PROTOCOL_H_
-#define _WPC83627_POLICY_PROTOCOL_H_
-
-EFI_FORWARD_DECLARATION (EFI_WPC83627_POLICY_PROTOCOL);
-
-#define EFI_WPC83627_POLICY_PROTOCOL_GUID \
- { \
- 0xd3ecc567, 0x9fd5, 0x44c1, 0x86, 0xcf, 0x5d, 0xa7, 0xa2, 0x4f, 0x4b, 0x5d \
- }
-
-#define EFI_WPC83627_COM1_ENABLE 0x01
-#define EFI_WPC83627_COM2_ENABLE 0x01
-
-#define EFI_WPC83627_COM3_ENABLE 0x01
-#define EFI_WPC83627_COM4_ENABLE 0x01
-
-#define EFI_WPC83627_LPT1_ENABLE 0x01
-#define EFI_WPC83627_LPT1_ENABLE 0x01
-#define EFI_WPC83627_FDD_ENABLE 0x01
-#define EFI_WPC83627_FDD_WRITE_ENABLE 0x01
-#define EFI_WPC83627_PS2_KBC_ENABLE 0x01
-#define EFI_WPC83627_ECIR_ENABLE 0x01
-
-#define EFI_WPC83627_COM1_DISABLE 0x00
-#define EFI_WPC83627_COM2_DISABLE 0x00
-
-#define EFI_WPC83627_COM3_DISABLE 0x00
-#define EFI_WPC83627_COM4_DISABLE 0x00
-
-#define EFI_WPC83627_LPT1_DISABLE 0x00
-#define EFI_WPC83627_FDD_DISABLE 0x00
-#define EFI_WPC83627_FDD_WRITE_PROTECT 0x00
-#define EFI_WPC83627_PS2_KBC_DISABLE 0x00
-#define EFI_WPC83627_ECIR_DISABLE 0x00
-#define EFI_WPC83627_RESERVED_DEFAULT 0x00
-
-typedef struct {
- UINT16 Com1 :1; // 0 = Disable, 1 = Enable
- UINT16 Lpt1 :1; // 0 = Disable, 1 = Enable
- UINT16 Floppy :1; // 0 = Disable, 1 = Enable
- UINT16 FloppyWriteProtect :1; // 0 = Write Protect, 1 = Write Enable
- UINT16 Port80 :1; // 0 = Disable, 1 = Enable
- UINT16 CIR :1; // CIR enable or disable
- UINT16 Ps2Keyboard :1; // 0 = Disable, 1 = Enable
- UINT16 Ps2Mouse :1; // 0 = Disable, 1 = Enable
- UINT16 Com2 :1; // 0 = Disable, 1 = Enable
-
- UINT16 Com3 :1; // 0 = Disable, 1 = Enable
- UINT16 Com4 :1; // 0 = Disable, 1 = Enable
-
- UINT16 Dac :1; // 0 = Disable, 1 = Enable
- UINT16 Rsvd :6;
-} EFI_WPC83627_DEVICE_ENABLES;
-
-typedef enum {
- LptModeOutput,
- LptModeBiDirectional,
- LptModeEpp,
- LptModeEcp
-} EFI_LPT_MODE;
-
-typedef struct _EFI_WPC83627_POLICY_PROTOCOL {
- EFI_WPC83627_DEVICE_ENABLES DeviceEnables;
- EFI_LPT_MODE LptMode;
-} EFI_WPC83627_POLICY_PROTOCOL;
-
-extern EFI_GUID gEfiLpcWpc83627PolicyProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/LpcWpce791Policy.h b/Vlv2TbltDevicePkg/Include/Protocol/LpcWpce791Policy.h deleted file mode 100644 index 4c897da382..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/LpcWpce791Policy.h +++ /dev/null @@ -1,60 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- LpcWpce791Policy.h
-
-Abstract:
-
- Protocol used for WPCE791 Policy definition.
-
-**/
-
-#ifndef _WPCE791_POLICY_PROTOCOL_H_
-#define _WPCE791_POLICY_PROTOCOL_H_
-
-
-#define EFI_WPCE791_POLICY_PROTOCOL_GUID \
- { \
- 0xab2bee2f, 0xc1a6, 0x4399, 0x85, 0x3d, 0xc0, 0x7c, 0x77, 0x4f, 0xfd, 0xd \
- }
-
-#define EFI_WPCE791_PS2_KEYBOARD_ENABLE 0x01
-#define EFI_WPCE791_PS2_KEYBOARD_DISABLE 0x00
-
-#define EFI_WPCE791_PS2_MOUSE_ENABLE 0x01
-#define EFI_WPCE791_PS2_MOUSE_DISABLE 0x00
-
-typedef struct {
- UINT16 Com1 :1; // 0 = Disable, 1 = Enable
- UINT16 Lpt1 :1; // 0 = Disable, 1 = Enable
- UINT16 Floppy :1; // 0 = Disable, 1 = Enable
- UINT16 FloppyWriteProtect :1; // 0 = Write Protect, 1 = Write Enable
- UINT16 Port80 :1; // 0 = Disable, 1 = Enable
- UINT16 CIR :1; // CIR enable or disable
- UINT16 Ps2Keyboard :1; // 0 = Disable, 1 = Enable
- UINT16 Ps2Mouse :1; // 0 = Disable, 1 = Enable
- UINT16 Com2 :1; // 0 = Disable, 1 = Enable
- UINT16 Dac :1; // 0 = Disable, 1 = Enable
- UINT16 Rsvd :6;
-} EFI_WPCE791_DEVICE_ENABLES;
-
-typedef struct _EFI_WPCE791_POLICY_PROTOCOL {
- EFI_WPCE791_DEVICE_ENABLES DeviceEnables;
-} EFI_WPCE791_POLICY_PROTOCOL;
-
-extern EFI_GUID gEfiLpcWpce791PolicyProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/MmioDevice.h b/Vlv2TbltDevicePkg/Include/Protocol/MmioDevice.h deleted file mode 100644 index 6848f52f06..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/MmioDevice.h +++ /dev/null @@ -1,89 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-**/
-
-#ifndef __MMIO_DEVICE_H__
-#define __MMIO_DEVICE_H__
-
-//
-// Protocol to define for the MMIO device
-//
-typedef struct {
- //
- // Address of a GUID
- //
- EFI_GUID *Guid;
-
- //
- // Context for the protocol
- //
- VOID *Context;
-} EFI_MMIO_DEVICE_PROTOCOL_ITEM;
-
-
-typedef struct _EFI_MMIO_DEVICE_PROTOCOL EFI_MMIO_DEVICE_PROTOCOL;
-
-//
-// The MMIO device protocol defines a memory mapped I/O device
-// for use by the system.
-//
-struct _EFI_MMIO_DEVICE_PROTOCOL {
- //
- // Pointer to an ACPI_EXTENDED_HID_DEVICE_PATH structure
- // containing HID/HidStr and CID/CidStr values.
- //
- // See the note below associated with the UnitIdentification
- // field.
- //
- CONST ACPI_EXTENDED_HID_DEVICE_PATH *AcpiPath;
-
- //
- // Allow the use of a shared template for the AcpiPath.
- //
- // If this value is non-zero UID value then the AcpiPath must
- // be a template which contains only the HID/HidStr and CID/CidStr
- // values. The UID/UidStr values in the AcpiPath must be zero!
- //
- // If this value is zero then the AcpiPath is not shared and
- // must contain either a non-zero UID value or a UidStr value.
- //
- UINT32 UnitIdentification;
-
- //
- // Hardware revision - ACPI _HRV value
- //
- UINT32 HardwareRevision;
-
- //
- // Pointer to a data structure containing the controller
- // resources and configuration. At a minimum this points
- // to an EFI_PHYSICAL_ADDRESS for the base address of the
- // MMIO device.
- //
- CONST VOID *DriverResources;
-
- //
- // Number of protocols in the array
- //
- UINTN ProtocolCount;
-
- //
- // List of protocols to define
- //
- CONST EFI_MMIO_DEVICE_PROTOCOL_ITEM *ProtocolArray;
-};
-
-extern EFI_GUID gEfiMmioDeviceProtocolGuid;
-
-#endif // __MMIO_DEVICE_H__
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/Observable.h b/Vlv2TbltDevicePkg/Include/Protocol/Observable.h deleted file mode 100644 index 31af6dd4ca..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/Observable.h +++ /dev/null @@ -1,191 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- Observable.h
-
-Abstract:
-
- Interface and GUID definitions for Observable protocol.
-
-**/
-
-#ifndef _OBSERVABLE_PROTOCOL_H_
-#define _OBSERVABLE_PROTOCOL_H_
-
-//
-// GUID Definitions
-//
-#define OBSERVABLE_PROTOCOL_GUID \
- { \
- 0xe227c522, 0xd5fe, 0x4a53, 0x87, 0xb1, 0x0f, 0xbe, 0x57, 0x0f, 0x98, 0xe9 \
- }
-
-extern EFI_GUID gObservableProtocolGuid;
-
-typedef struct _OBS_OBSERVABLE_PROTOCOL OBS_OBSERVABLE_PROTOCOL;
-
-//
-// Interface Definitions
-//
-
-/**
- Remove all observables.
-
- Remove all observable guids and all interfaces subscribed to them.
-
- @param VOID No Parameters.
-
- @return EFI_SUCCESS Successfully removed all observables and subscribed interfaces.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_REMOVE_ALL_OBSERVABLES) (
- VOID
- );
-
-/**
- Interface for notification functions.
-
- Functions that are to be used as callbacks must inherit this interface in order to be used properly.
-
- @param VOID* Data Parameter context to be passed to the notification function.
-
- @return EFI_STATUS Varies depending on implementation.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_CALLBACK) (
- IN OUT VOID* Data
- );
-
-/**
- Subscribe an interface with an observable guid.
-
- Use this to register a callback function with a guid. The function provided by CallbackInterface will be executed
- whenever the appropriate observable instance specified by ReferenceGuid calls Publish.
-
- @param EFI_GUID ReferenceGuid The observable guid that the callback interface will subscribe to.
- OBS_NOTIFY_INTERFACE CallbackInterface A pointer to the function that is subscribing to the observable.
-
- @return EFI_SUCCESS Successfully subscribed the interface to the observable guid.
- EFI_NOT_FOUND No match could be found between the provided guid and existing observables.
- EFI_OUT_OF_RESOURCES Could not subscribe to this observer due to resource limitations.
- EFI_INVALID_PARAMETER Interface is already subscribed to this observer.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_SUBSCRIBE) (
- IN EFI_GUID ReferenceGuid,
- IN OBS_CALLBACK CallbackInterface
- );
-
-/**
- Unsubscribe an interface with an observable guid.
-
- Use this to remove an interface from the callback list associated with an observable guid.
-
- @param EFI_GUID ReferenceGuid The observable guid to unsubscribe the interface from.
- OBS_NOTIFY_INTERFACE NotifyCallback A pointer to the interface that is being unsubscribed.
-
- @return EFI_SUCCESS Successfully unsubscribed the interface from the observable guid.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_UNSUBSCRIBE) (
- IN EFI_GUID ReferenceGuid,
- IN OBS_CALLBACK CallbackInterface
- );
-
-/**
- Notify observing functions.
-
- Use this to notify all functions who are subscribed to the guid specified by ReferenceGuid.
-
- @param EFI_GUID ReferenceGuid The observable guid that contains the the list of interfaces to be notified.
- VOID* Data Parameter context to be passed to the notification function.
-
- @return EFI_SUCCESS Successfully notified all observers listening to this guid.
- EFI_NOT_FOUND No match could be found between the provided guid and existing observables.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_PUBLISH) (
- IN EFI_GUID ReferenceGuid,
- IN OUT VOID* Data
- );
-
-/**
- Creates a new observable.
-
- Create a new observable that can be observed with the use of Subscribe function.
-
- @param EFI_GUID ReferenceGuid The observable guid to add.
-
- @return EFI_SUCCESS Successfully added observable.
- EFI_INVALID_PARAMETER Observable already exists.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_ADD_OBSERVABLE) (
- IN EFI_GUID ReferenceGuid
- );
-
-/**
- Remove an observable.
-
- Remove an observable so that it can no longer be subscribed to. In addition, unsubscribe any functions
- that are subscribed to this guid.
-
- @param EFI_GUID ReferenceGuid The observable guid to remove.
-
- @return EFI_SUCCESS Successfully removed observable.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *OBS_REMOVE_OBSERVABLE) (
- IN EFI_GUID ReferenceGuid
- );
-
-//
-// Protocol Definitions
-//
-typedef struct _OBS_LEAF {
- OBS_CALLBACK Observer;
- struct _OBS_LEAF* Next;
-} OBS_LEAF;
-
-typedef struct _OBS_TREE {
- EFI_GUID ObservableGuid;
- OBS_LEAF* Leaf;
- struct _OBS_TREE* Next;
-} OBS_TREE;
-
-struct _OBS_OBSERVABLE_PROTOCOL {
- OBS_ADD_OBSERVABLE AddObservable;
- OBS_REMOVE_OBSERVABLE RemoveObservable;
- OBS_SUBSCRIBE Subscribe;
- OBS_UNSUBSCRIBE Unsubscribe;
- OBS_PUBLISH Publish;
- OBS_REMOVE_ALL_OBSERVABLES RemoveAllObservables;
-} ;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/PlatformGopPolicy.h b/Vlv2TbltDevicePkg/Include/Protocol/PlatformGopPolicy.h deleted file mode 100644 index f0d021bd70..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/PlatformGopPolicy.h +++ /dev/null @@ -1,73 +0,0 @@ -/*++
-
-Copyright (c) 1999 - 2014, Intel Corporation. All rights reserved
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
---*/
-
-/** @file
-**/
-
-#ifndef _PLATFORM_GOP_POLICY_PROTOCOL_H_
-#define _PLATFORM_GOP_POLICY_PROTOCOL_H_
-
-#define EFI_PLATFORM_GOP_POLICY_PROTOCOL_GUID \
- { 0xec2e931b, 0x3281, 0x48a5, 0x81, 0x7, 0xdf, 0x8a, 0x8b, 0xed, 0x3c, 0x5d }
-
-#define EFI_BMP_IMAGE_GUID \
- { 0x878AC2CC, 0x5343, 0x46F2, 0xB5, 0x63, 0x51, 0xF8, 0x9D, 0xAF, 0x56, 0xBA }
-
-#define PLATFORM_GOP_POLICY_PROTOCOL_REVISION_01 0x01
-#define PLATFORM_GOP_POLICY_PROTOCOL_REVISION_02 x0222
-
-#pragma pack(1)
-
-typedef enum {
- LidClosed,
- LidOpen,
- LidStatusMax
-} LID_STATUS;
-
-typedef enum {
- Docked,
- UnDocked,
- DockStatusMax
-} DOCK_STATUS;
-
-typedef
-EFI_STATUS
-(EFIAPI *GET_PLATFORM_LID_STATUS) (
- OUT LID_STATUS *CurrentLidStatus
-);
-
-typedef
-EFI_STATUS
-(EFIAPI *GET_VBT_DATA) (
- OUT EFI_PHYSICAL_ADDRESS *VbtAddress,
- OUT UINT32 *VbtSize
-);
-
-#pragma pack()
-
-typedef struct _PLATFORM_GOP_POLICY_PROTOCOL {
- UINT32 Revision;
- GET_PLATFORM_LID_STATUS GetPlatformLidStatus;
- GET_VBT_DATA GetVbtData;
-} PLATFORM_GOP_POLICY_PROTOCOL;
-
-//
-// Extern the GUID for protocol users.
-//
-extern EFI_GUID gPlatformGOPPolicyGuid;
-
-extern EFI_GUID gBmpImageGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/PlatformIdeInit.h b/Vlv2TbltDevicePkg/Include/Protocol/PlatformIdeInit.h deleted file mode 100644 index 45add2b421..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/PlatformIdeInit.h +++ /dev/null @@ -1,48 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- PlatformIdeInit.h
-
-Abstract:
-
- EFI Platform Ide Init Protocol
-
-Revision History
-
-**/
-
-#ifndef _EFI_PLATFORM_IDE_INIT_H_
-#define _EFI_PLATFORM_IDE_INIT_H_
-
-//
-// Global ID for the IDE Platform Protocol
-//
-#define EFI_PLATFORM_IDE_INIT_PROTOCOL_GUID \
- { 0x377c66a3, 0x8fe7, 0x4ee8, 0x85, 0xb8, 0xf1, 0xa2, 0x82, 0x56, 0x9e, 0x3b };
-
-EFI_FORWARD_DECLARATION (EFI_PLATFORM_IDE_INIT_PROTOCOL);
-
-
-//
-// Interface structure for the Platform IDE Init Protocol
-//
-typedef struct _EFI_PLATFORM_IDE_INIT_PROTOCOL {
- BOOLEAN SmartMode;
-} EFI_PLATFORM_IDE_INIT_PROTOCOL;
-
-extern EFI_GUID gEfiPlatformIdeInitProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/SetupMode.h b/Vlv2TbltDevicePkg/Include/Protocol/SetupMode.h deleted file mode 100644 index 87fb5237a8..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/SetupMode.h +++ /dev/null @@ -1,84 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- SetupMode.h
-
-Abstract:
-
- EFI Setup Mode
-
-Revision History
-
-**/
-
-#ifndef _EFI_SETUP_MODE_H_
-#define _EFI_SETUP_MODE_H_
-
-//
-// Global ID for the Setup Mode
-//
-#define EFI_PLATFORM_BOOT_MODE_GUID \
- { 0xce845704, 0x1683, 0x4d38, 0xa4, 0xf9, 0x7d, 0xb, 0x50, 0x77, 0x57, 0x93 }
-
-#define EFI_NORMAL_SETUP_GUID \
- { 0xec87d643, 0xeba4, 0x4bb5, 0xa1, 0xe5, 0x3f, 0x3e, 0x36, 0xb2, 0xd, 0xa9 }
-
-#define EFI_NORMAL_SETUP_RESET_NAME L"Reset"
-
-enum {
- //
- // This means: "whatever reset defaults in setup does"
- //
- SetupDataResetNormal = 0,
-
- //
- // This means: "the defaults built into the BIOS"
- //
- SetupDataResetStandard = 1,
-
- //
- // This means: "the manufacturing mode defaults"
- //
- SetupDataResetManufacturing = 2,
-
- //
- // This means: "the oem defaults"
- //
- SetupDataResetOem = 3,
-};
-
-//
-// PlatformBootMode types
-//
-#define PLATFORM_NORMAL_MODE 0x01
-#define PLATFORM_SAFE_MODE 0x02
-#define PLATFORM_RECOVERY_MODE 0x04
-#define PLATFORM_MANUFACTURING_MODE 0x08
-#define PLATFORM_BACK_TO_BIOS_MODE 0x10
-
-extern EFI_GUID gEfiPlatformBootModeGuid;
-extern EFI_GUID gEfiNormalSetupGuid;
-extern CHAR16 gEfiNormalSetupName[];
-extern CHAR16 gEfiInSetupName[];
-extern CHAR16 gEfiSystemPasswordName[];
-
-typedef struct {
- EFI_GUID SetupGuid;
- CHAR16 SetupName[0x20]; // Maximum "Setup" Name
- UINT32 PlatformBootMode;
-} EFI_PLATFORM_SETUP_ID;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/SmbiosSlotPopulation.h b/Vlv2TbltDevicePkg/Include/Protocol/SmbiosSlotPopulation.h deleted file mode 100644 index e677be3756..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/SmbiosSlotPopulation.h +++ /dev/null @@ -1,52 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-Module Name:
-
- SmbiosSlotPopulation.h
-
-Abstract:
-
- EFI SMBIOS slot structure control code.
-
-GUID:
- {EF7BF7D6-F8FF-4a76-8247-C0D0D1CC49C0}
- 0xef7bf7d6, 0xf8ff, 0x4a76, 0x82, 0x47, 0xc0, 0xd0, 0xd1, 0xcc, 0x49, 0xc0
-
-Revision History
-
-**/
-
-#ifndef _EFI_SMBIOS_SLOT_POPULATION_H_
-#define _EFI_SMBIOS_SLOT_POPULATION_H_
-
-//
-// Slot Population Protocol GUID
-//
-#define EFI_SMBIOS_SLOT_POPULATION_GUID \
- { 0xef7bf7d6, 0xf8ff, 0x4a76, 0x82, 0x47, 0xc0, 0xd0, 0xd1, 0xcc, 0x49, 0xc0 }
-
-typedef struct {
- UINT16 SmbiosSlotId; // SMBIOS Slot ID
- BOOLEAN InUse; // Does the slot have a card in it
- BOOLEAN Disabled; // Should the slot information be in SMBIOS
-} EFI_SMBIOS_SLOT_ENTRY;
-
-typedef struct {
- UINT32 NumberOfEntries;
- EFI_SMBIOS_SLOT_ENTRY *SlotEntries;
-} EFI_SMBIOS_SLOT_POPULATION_INFO;
-
-extern EFI_GUID gEfiSmbiosSlotPopulationGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/Speaker.h b/Vlv2TbltDevicePkg/Include/Protocol/Speaker.h deleted file mode 100644 index f76d63286f..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/Speaker.h +++ /dev/null @@ -1,70 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-Module Name:
-
- Speaker.h
-
-Abstract:
-
- EFI Speaker Interface Protocol
-
-Revision History
-
-**/
-
-#ifndef _EFI_SPEAKER_H
-#define _EFI_SPEAKER_H
-
-//
-// Global Id for Speaker Interface
-//
-#define EFI_SPEAKER_INTERFACE_PROTOCOL_GUID \
- { \
- 0x400b4476, 0x3081, 0x11d6, 0x87, 0xed, 0x00, 0x06, 0x29, 0x45, 0xc3, 0xb9 \
- }
-
-typedef struct _EFI_SPEAKER_IF_PROTOCOL EFI_SPEAKER_IF_PROTOCOL;
-
-//
-// Beep Code
-//
-typedef
-EFI_STATUS
-(EFIAPI *EFI_GENERATE_BEEP) (
- IN EFI_SPEAKER_IF_PROTOCOL * This,
- IN UINTN NumberOfBeep,
- IN UINTN BeepDuration,
- IN UINTN TimeInterval
- );
-
-//
-// Set Frequency
-//
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SPEAKER_SET_FREQUENCY) (
- IN EFI_SPEAKER_IF_PROTOCOL * This,
- IN UINT16 Frequency
- );
-
-//
-// Protocol definition
-//
-struct _EFI_SPEAKER_IF_PROTOCOL {
- EFI_SPEAKER_SET_FREQUENCY SetSpeakerToneFrequency;
- EFI_GENERATE_BEEP GenerateBeep;
-} ;
-
-extern EFI_GUID gEfiSpeakerInterfaceProtocolGuid;
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/TcoReset.h b/Vlv2TbltDevicePkg/Include/Protocol/TcoReset.h deleted file mode 100644 index d8047d408b..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/TcoReset.h +++ /dev/null @@ -1,72 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- TcoReset.h
-
-Abstract:
-
- Protocol to communicate with ICH TCO.
-
-GUID Info:
- {A6A79162-E325-4c30-BCC3-59373064EFB3}
- 0xa6a79162, 0xe325, 0x4c30, 0xbc, 0xc3, 0x59, 0x37, 0x30, 0x64, 0xef, 0xb3);
-
-
---*/
-
-#ifndef _TCO_RESET_H_
-#define _TCO_RESET_H_
-
-
-#define EFI_TCO_RESET_PROTOCOL_GUID \
- {0xa6a79162, 0xe325, 0x4c30, 0xbc, 0xc3, 0x59, 0x37, 0x30, 0x64, 0xef, 0xb3}
-
-typedef struct _EFI_TCO_RESET_PROTOCOL EFI_TCO_RESET_PROTOCOL;
-
-/**
- Enables the TCO timer to reset the system in case of a system hang. This is
- used when writing the clock registers.
-
- @param[in] RcrbGcsSaveValue This is the value of the RCRB GCS register before it is
- changed by this procedure. This will be used to restore
- the settings of this register in PpiDisableTcoReset.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_TCO_RESET_PROTOCOL_ENABLE_TCO_RESET) (
- IN UINT32 *RcrbGcsSaveValue
- );
-
-/**
- Disables the TCO timer. This is used after writing the clock registers.
-
- @param[in] RcrbGcsRestoreValue Value saved in PpiEnableTcoReset so that it can
- restored.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_TCO_RESET_PROTOCOL_DISABLE_TCO_RESET) (
- OUT UINT32 RcrbGcsRestoreValue
- );
-
-typedef struct _EFI_TCO_RESET_PROTOCOL {
- EFI_TCO_RESET_PROTOCOL_ENABLE_TCO_RESET EnableTcoReset;
- EFI_TCO_RESET_PROTOCOL_DISABLE_TCO_RESET DisableTcoReset;
-} EFI_TCO_RESET_PROTOCOL;
-
-extern EFI_GUID gEfiTcoResetProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/TpmMp.h b/Vlv2TbltDevicePkg/Include/Protocol/TpmMp.h deleted file mode 100644 index 8ce084867d..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/TpmMp.h +++ /dev/null @@ -1,141 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-
-Module Name:
-
- Tpm.h
-
-Abstract:
-
-
---*/
-
-#ifndef __EFI_TPM_MP_DRIVER_PROTOCOL_H__
-#define __EFI_TPM_MP_DRIVER_PROTOCOL_H__
-
-
-#define EFI_TPM_MP_DRIVER_PROTOCOL_GUID \
- { 0xde161cfe, 0x1e60, 0x42a1, 0x8c, 0xc3, 0xee, 0x7e, 0xf0, 0x73, 0x52, 0x12 }
-
-
-EFI_FORWARD_DECLARATION (EFI_TPM_MP_DRIVER_PROTOCOL);
-
-#define TPM_DRIVER_STATUS 0
-#define TPM_DEVICE_STATUS 1
-
-#define TPM_DRIVER_OK 0
-#define TPM_DRIVER_FAILED 1
-#define TPM_DRIVER_NOT_OPENED 2
-#define TPM_DEVICE_OK 0
-#define TPM_DEVICE_UNRECOVERABLE 1
-#define TPM_DEVICE_RECOVERABLE 2
-#define TPM_DEVICE_NOT_FOUND 3
-
-//
-// Prototypes for the TPM MP Driver Protocol
-//
-
-/**
- This service Open the TPM interface
-
- @param[in] This A pointer to the EFI_TPM_MP_DRIVER_PROTOCOL.
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
- @retval EFI_NOT_FOUND The component was not running
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_TPM_MP_INIT) (
- IN EFI_TPM_MP_DRIVER_PROTOCOL *This
- );
-
-/**
- This service close the TPM interface and deactivate TPM
-
- @param[in] This A pointer to the EFI_TPM_MP_DRIVER_PROTOCOL.
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
- @retval EFI_NOT_FOUND The component was not running
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_TPM_MP_CLOSE) (
- IN EFI_TPM_MP_DRIVER_PROTOCOL *This
- );
-
-/**
- This service get the current status infomation of TPM
-
- @param[in] This A pointer to the EFI_TPM_MP_DRIVER_PROTOCOL.
- @param[in] ReqStatusType Requested type of status information, driver or device.
- @param[in] Status Pointer to the returned status.
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
- @retval EFI_INVALID_PARAMETER One or more of the parameters are incorrect
- @retval EFI_BUFFER_TOO_SMALL The receive buffer is too small
- @retval EFI_NOT_FOUND The component was not running
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_TPM_MP_GET_STATUS_INFO) (
- IN EFI_TPM_MP_DRIVER_PROTOCOL *This,
- IN UINT32 ReqStatusType,
- OUT UINT32 *Status
- );
-
-/**
- This service transmit data to the TPM and get response from TPM
-
- @param[in] This A pointer to the EFI_TPM_MP_DRIVER_PROTOCOL.
- @param[in] TransmitBuf Pointer to a buffer containing TPM transmit data.
- @param[in] TransmitBufLen Sizeof TPM input buffer in bytes.
- @param[in] ReceiveBuf Pointer to a buffer containing TPM receive data.
- @param[in] ReceiveBufLen On input, size of TPM receive buffer in bytes.
- On output, number of bytes written.
-
- @retval EFI_SUCCESS Operation completed successfully
- @retval EFI_DEVICE_ERROR The command was unsuccessful
- @retval EFI_INVALID_PARAMETER One or more of the parameters are incorrect
- @retval EFI_BUFFER_TOO_SMALL The receive buffer is too small
- @retval EFI_NOT_FOUND The component was not running
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_TPM_MP_TRANSMIT) (
- IN EFI_TPM_MP_DRIVER_PROTOCOL *This,
- IN UINT8 *TransmitBuffer,
- IN UINT32 TransmitBufferLen,
- OUT UINT8 *ReceiveBuf,
- IN OUT UINT32 *ReceiveBufLen
- );
-
-
-
-typedef struct _EFI_TPM_MP_DRIVER_PROTOCOL {
- EFI_TPM_MP_INIT Init;
- EFI_TPM_MP_CLOSE Close;
- EFI_TPM_MP_GET_STATUS_INFO GetStatusInfo;
- EFI_TPM_MP_TRANSMIT Transmit;
-} EFI_TPM_MP_DRIVER_PROTOCOL;
-
-extern EFI_GUID gEfiTpmMpDriverProtocolGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/UsbPolicy.h b/Vlv2TbltDevicePkg/Include/Protocol/UsbPolicy.h deleted file mode 100644 index 31ac22ea50..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/UsbPolicy.h +++ /dev/null @@ -1,131 +0,0 @@ -/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-Module Name:
- UsbPolicy.h
-
-Abstract:
-
---*/
-
-#ifndef _USB_POLICY_H_
-#define _USB_POLICY_H_
-
-EFI_FORWARD_DECLARATION (EFI_USB_POLICY_PROTOCOL);
-
-#define USB_POLICY_GUID \
- {\
- 0xf617b358, 0x12cf, 0x414a, 0xa0, 0x69, 0x60, 0x67, 0x7b, 0xda, 0x13, 0xb4\
- }
-
-#define TIANO_CODE_BASE 0x00
-#define ICBD_CODE_BASE 0x01
-
-#define ATUO_TYPE 0x00
-#define USB_FDD_TYPE 0x01
-#define HDD_TYPE 0x02
-#define ZIP_TYPE 0x03
-#define CDROM_TYPE 0x04
-#define SIZE_TYPE 0x05
-
-#define ZIP_FDD 0x80
-
-#define FDD_EMULATION 0x00
-#define HDD_EMULATION 0x01
-
-#define HIGH_SPEED 0x00
-#define FULL_SPEED 0x01
-#define SUPER_SPEED 0x02
-
-#define LEGACY_KB_EN 0x01
-#define LEGACY_KB_DIS 0x00
-#define LEGACY_MS_EN 0x01
-#define LEGACY_MS_DIS 0x00
-#define LEGACY_USB_EN 0x00
-#define LEGACY_USB_DIS 0x01
-#define LEGACY_FREE_SUPP 0x01
-#define LEGACY_FREE_UN_SUPP 0x00
-#define LEGACY_PERIOD_SUPP 0x01
-#define LEGACY_PERIOD_UN_SUPP 0x00
-
-#define LEGACY_USB_TIME_TUE_ENABLE 0x01
-#define LEGACY_USB_TIME_TUE_DISABLE 0x00
-#define USB_HAVE_HUB_INTERNEL 0x01
-#define USB_NOT_HAVE_HUB_INTERNEL 0x00
-
-#define USB_POLICY_PROTOCOL_REVISION_1 1
-#define USB_POLICY_PROTOCOL_REVISION_2 2
-
-#ifndef __GNUC__
-#pragma warning ( disable : 4306 )
-#pragma warning ( disable : 4054 )
-#endif
-
-#define GET_USB_CFG (UsbCfg);\
- do{\
- UINT16 *pSegOfEbda;\
- UINT32 mToEbda;\
- pSegOfEbda = (UINT16 *)(UINTN)0x40E;\
- mToEbda = (UINT32)(((UINTN)(*pSegOfEbda) << 4) + 0x80);\
- UsbCfg = (USB_CFG *)(UINTN)mToEbda;\
- }while(0);
-
-#pragma pack(1)
-typedef struct {
- UINT8 HasUSBKeyboard:1;
- UINT8 HasUSBMouse:1;
- UINT8 LegacyFreeSupport:1;
- UINT8 UsbOperationMode:1;
- UINT8 LegacyKBEnable:1;
- UINT8 LegacyMSEnable:1;
- UINT8 USBPeriodSupport:1;
- UINT8 Reserved:1;
-} USB_DEVICE_INFOR;
-
-typedef struct {
- UINT8 Codebase;
- UINT8 USBHDDForceType;
- UINT8 Configurated;
- UINT8 LpcAcpiBase;
- UINT8 AcpiTimerReg;
- UINT8 Reserved1[0x01];
- UINT8 LegacyUsbEnable;
- USB_DEVICE_INFOR UsbDeviceInfor;
- UINT16 UsbEmulationSize;
- UINT8 Reserved2[0x06];
-} USB_CFG;
-#pragma pack()
-
-typedef struct _EFI_USB_POLICY_PROTOCOL{
- UINT8 Version;
- UINT8 UsbMassStorageEmulationType; // 1: FDD_Type; 2: HDD_Type; other:Auto_Type*
- UINT8 UsbOperationMode; // 0: High_Speed; 1: Full_Speed;
- UINT8 LegacyKBEnable; // 0: Disabled; 1: Enabled*
- UINT8 LegacyMSEnable; // 0: Disabled; 1: Enabled*
- UINT8 USBPeriodSupport; // 0; Unsupport; 1: Support
- UINT8 LegacyUsbEnable; // 1: Disabled; 0: Enabled*
- UINT8 LegacyFreeSupport; // 0: Unsupport; 1: Support
- UINT8 CodeBase;
- UINT8 LpcAcpiBase; // 40h(default)
- UINT8 AcpiTimerReg;
- UINT8 UsbTimeTue;
- UINT8 InternelHubExist; // 1: Host have internel hub on board; 0: No internel hub on board
- UINT8 EnumWaitPortStableStall; // Value for wait port stable when enum a new dev.
- UINT16 UsbEmulationSize; // Mbytes.
- UINT8 UsbZipEmulationType;
- UINT8 Reserved[3]; // Reserved fields for future expansion w/o protocol change
-} EFI_USB_POLICY_PROTOCOL;
-
-extern EFI_GUID gUsbPolicyGuid;
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/VlvPlatformPolicy.h b/Vlv2TbltDevicePkg/Include/Protocol/VlvPlatformPolicy.h deleted file mode 100644 index 8e500935d0..0000000000 --- a/Vlv2TbltDevicePkg/Include/Protocol/VlvPlatformPolicy.h +++ /dev/null @@ -1,108 +0,0 @@ -/**
- Copyright (c) 2009 - 2013, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-
-Module Name:
-
- VlvPlatformPolicy.h
-
-Abstract:
-
- Interface definition details between MCH and platform drivers during DXE phase.
-
---*/
-
-#ifndef _VLV_PLATFORM_POLICY_H_
-#define _VLV_PLATFORM_POLICY_H_
-
-//
-// VLV Policy provided by platform for DXE phase {5BAB88BA-E0E2-4674-B6AD-B812F6881CD6}
-//
-#define DXE_VLV_PLATFORM_POLICY_GUID \
- {0x5bab88ba, 0xe0e2, 0x4674, 0xb6, 0xad, 0xb8, 0x12, 0xf6, 0x88, 0x1c, 0xd6}
-
-//
-// Extern the GUID for protocol users.
-//
-extern EFI_GUID gDxeVlvPlatformPolicyGuid;
-
-//
-// Protocol revision number
-// Any backwards compatible changes to this protocol will result in an update in the revision number
-// Major changes will require publication of a new protocol
-//
-#define DXE_VLV_PLATFORM_POLICY_PROTOCOL_REVISION 0
-
-
-typedef struct {
- UINT8 PFITStatus;
- UINT8 IgdTheramlSupport;
- UINT8 ALSEnabled;
- UINT8 LidStatus;
-} IGD_PANEL_FEATURES;
-
-typedef struct {
- UINT8 Reserved00;
- UINT8 Reserved01;
- UINT16 Reserved02;
- UINT16 Reserved03;
- UINT16 Reserved04;
- UINT16 Reserved05;
- UINT16 Reserved06;
- UINT16 Reserved07;
- UINT16 Reserved08;
- UINT16 Reserved09;
- UINT16 Reserved0A;
- UINT16 Reserved0B;
- UINT16 Reserved0C;
- UINT16 Reserved0D;
- UINT8 Reserved0E;
- UINT8 Reserved0F;
- UINT32 Reserved10;
- UINT32 Reserved11;
- UINT32 Reserved12;
- UINT32 Reserved13;
- UINT32 Reserved14;
- UINT8 Reserved15;
- UINT8 Reserved16;
-} DPTF_SETTINGS;
-
-//
-// MCH DXE Platform Policiy ==================================================
-//
-
-#define NO_AUDIO 0
-#define HD_AUDIO 1
-#define LPE_AUDIO 2
-
-typedef struct _DXE_VLV_PLATFORM_POLICY_PROTOCOL {
- UINT8 Revision;
- IGD_PANEL_FEATURES IgdPanelFeatures;
- DPTF_SETTINGS Reserved;
- UINT8 GraphicReserve00;
- UINT8 GraphicsPerfAnalyzers;
- UINT8 PwmReserved00;
- UINT8 PwmReserved01;
- UINT8 PmSupport;
- UINT8 GraphicReserve01;
- UINT8 GfxPause;
- UINT8 GraphicsFreqReq;
- UINT8 GraphicReserve03;
- UINT8 GraphicReserve02;
- UINT8 GraphicReserve04;
- UINT8 PavpMode;
- UINT8 GraphicReserve05;
- UINT8 UlClockGating;
- UINT8 IdleReserve;
- UINT8 AudioTypeSupport;
- UINT8 GraphicReserve06;
-} DXE_VLV_PLATFORM_POLICY_PROTOCOL;
-
-#endif
|