diff options
| -rw-r--r-- | Vlv2DeviceRefCodePkg/AcpiTablesPCAT/AcpiTables.inf | 3 | ||||
| -rw-r--r-- | Vlv2DeviceRefCodePkg/AcpiTablesPCAT/DSDT.ASL | 4 | ||||
| -rw-r--r-- | Vlv2DeviceRefCodePkg/AcpiTablesPCAT/RhProxy.asl | 166 |
3 files changed, 170 insertions, 3 deletions
diff --git a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/AcpiTables.inf b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/AcpiTables.inf index c857ab8c9a..9c006517c4 100644 --- a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/AcpiTables.inf +++ b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/AcpiTables.inf @@ -5,7 +5,7 @@ # All .asi files tagged with "ToolCode="DUMMY"" in following file list are device description and are included
# by top level ASL file which will be dealed with by asl.exe application.
#
-# Copyright (c) 1999 - 2014, Intel Corporation. All rights reserved
+# Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved
#
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
@@ -30,6 +30,7 @@ [sources.common]
DSDT.ASL
+ RhProxy.asl
Facs/Facs.aslc
Facp/Facp.aslc
Madt/Madt30.aslc
diff --git a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/DSDT.ASL b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/DSDT.ASL index 56ed3372da..4cd27c0191 100644 --- a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/DSDT.ASL +++ b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/DSDT.ASL @@ -5,7 +5,7 @@ ;* Family of Customer Reference Boards. *;
;* *;
;* *;
-;* Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved *;
+;* Copyright (c) 2012 - 2015, Intel Corporation. All rights reserved *;
;
; This program and the accompanying materials are licensed and made available under
; the terms and conditions of the BSD License that accompanies this distribution.
@@ -56,7 +56,7 @@ DefinitionBlock ( include ("PCI_DRC.ASL")
include ("Video.asl")
include ("Gpe.asl")
- include ("IoTVirtualDevice.asl")
+ //include ("IoTVirtualDevice.asl")
// Sleep states supported by Chipset/Board.
// SSx - BIOS setup controlled enabled _Sx Sleep state status
diff --git a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/RhProxy.asl b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/RhProxy.asl new file mode 100644 index 0000000000..5a0a6f5c29 --- /dev/null +++ b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/RhProxy.asl @@ -0,0 +1,166 @@ +/** @file
+ SSDT for RhProxy Driver.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock ("RHPX.aml", "SSDT", 1, "MSFT", "RHPROXY", 1)
+{
+ Scope (\_SB)
+ {
+ //
+ // Test peripheral device node for MinnowBoardMax
+ //
+ Device(RHPX)
+ {
+ Name(_HID, "MSFT8000")
+ Name(_CID, "MSFT8000")
+ Name(_UID, 1)
+
+ Name(_CRS, ResourceTemplate()
+ {
+ // Index 0
+ SPISerialBus( // Pin 5, 7, 9 , 11 of JP1 for SIO_SPI
+ 1, // Device selection
+ PolarityLow, // Device selection polarity
+ FourWireMode, // wiremode
+ 8, // databit len
+ ControllerInitiated, // slave mode
+ 8000000, // Connection speed
+ ClockPolarityLow, // Clock polarity
+ ClockPhaseSecond, // clock phase
+ "\\_SB.SPI1", // ResourceSource: SPI bus controller name
+ 0, // ResourceSourceIndex
+ ResourceConsumer, // Resource usage
+ JSPI, // DescriptorName: creates name for offset of resource descriptor
+ ) // Vendor Data
+
+ // Index 1
+ I2CSerialBus( // Pin 13, 15 of JP1, for SIO_I2C5 (signal)
+ 0xFF, // SlaveAddress: bus address (TBD)
+ , // SlaveMode: default to ControllerInitiated
+ 400000, // ConnectionSpeed: in Hz
+ , // Addressing Mode: default to 7 bit
+ "\\_SB.I2C6", // ResourceSource: I2C bus controller name (For MinnowBoard Max, hardware I2C5(0-based) is reported as ACPI I2C6(1-based))
+ ,
+ ,
+ JI2C, // Descriptor Name: creates name for offset of resource descriptor
+ ) // VendorData
+
+ // Index 2
+ UARTSerialBus( // Pin 17, 19 of JP1, for SIO_UART2
+ 115200, // InitialBaudRate: in bits ber second
+ , // BitsPerByte: default to 8 bits
+ , // StopBits: Defaults to one bit
+ 0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
+ , // IsBigEndian: default to LittleEndian
+ , // Parity: Defaults to no parity
+ , // FlowControl: Defaults to no flow control
+ 32, // ReceiveBufferSize
+ 32, // TransmitBufferSize
+ "\\_SB.URT2", // ResourceSource: UART bus controller name
+ ,
+ ,
+ UAR2, // DescriptorName: creates name for offset of resource descriptor
+ )
+
+ // Index 3
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {0} // Pin 21 of JP1 (GPIO_S5[00])
+ // Index 4
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {0}
+
+ // Index 5
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {1} // Pin 23 of JP1 (GPIO_S5[01])
+ // Index 6
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {1}
+
+ // Index 7
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {2} // Pin 25 of JP1 (GPIO_S5[02])
+ // Index 8
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {2}
+
+ // Index 9
+ UARTSerialBus( // Pin 6, 8, 10, 12 of JP1, for SIO_UART1
+ 115200, // InitialBaudRate: in bits ber second
+ , // BitsPerByte: default to 8 bits
+ , // StopBits: Defaults to one bit
+ 0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
+ , // IsBigEndian: default to LittleEndian
+ , // Parity: Defaults to no parity
+ FlowControlHardware, // FlowControl: Defaults to no flow control
+ 32, // ReceiveBufferSize
+ 32, // TransmitBufferSize
+ "\\_SB.URT1", // ResourceSource: UART bus controller name
+ ,
+ ,
+ UAR1, // DescriptorName: creates name for offset of resource descriptor
+ )
+
+ // Index 10
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {62} // Pin 14 of JP1 (GPIO_SC[62])
+ // Index 11
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {62}
+
+ // Index 12
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {63} // Pin 16 of JP1 (GPIO_SC[63])
+ // Index 13
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {63}
+
+ // Index 14
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {65} // Pin 18 of JP1 (GPIO_SC[65])
+ // Index 15
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {65}
+
+ // Index 16
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {64} // Pin 20 of JP1 (GPIO_SC[64])
+ // Index 17
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {64}
+
+ // Index 18
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {94} // Pin 22 of JP1 (GPIO_SC[94])
+ // Index 19
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {94}
+
+ // Index 20
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {95} // Pin 24 of JP1 (GPIO_SC[95])
+ // Index 21
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {95}
+
+ // Index 22
+ GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {54} // Pin 26 of JP1 (GPIO_SC[54])
+ // Index 23
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {54}
+ })
+
+ Name(_DSD, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ // SPI Mapping
+ Package(2) { "bus-SPI-SPI0", Package() { 0 }},
+
+ // TODO: Intel will need to provide the right value for SPI0 properties
+ Package(2) { "SPI0-MinClockInHz", 100 },
+ Package(2) { "SPI0-MaxClockInHz", 8000000 },
+ // SupportedDataBitLengths takes a list of support data bit length
+ // Example : Package(2) { "SPI0-SupportedDataBitLengths", Package() { 8, 7, 16 }},
+ Package(2) { "SPI0-SupportedDataBitLengths", Package() { 8 }},
+ // I2C Mapping
+ Package(2) { "bus-I2C-I2C5", Package() { 1 }},
+ // UART Mapping
+ Package(2) { "bus-UART-UART2", Package() { 2 }},
+ Package(2) { "bus-UART-UART1", Package() { 9 }},
+ }
+ })
+ }
+ }
+}
\ No newline at end of file |